{"title":"Attwood Marine","description":"","products":[{"product_id":"apl248569","title":"Attwood Marine Flush Mount Fuel Vent, SS316, 5\/8 in Hose, 7\/8 in Max Hull, 1-3\/8 in Hole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Alloy Flush Mount Fuel Vent is a 316 stainless steel fuel tank vent for boats that need a clean hull finish without a protruding exterior cap. It fits 5\/8 inch inner diameter vent hose, installs through a 1-3\/8 inch hole, and is suitable for hull thicknesses up to 7\/8 inch.\u003c\/p\u003e\u003cp\u003eThis vent is built for marine fuel venting applications where the outside fitting should sit close to the hull and stay less exposed to bumps, dock contact, and routine washdowns. The cap can be removed with a hex head wrench, giving access for filter cleaning and fuel system pressure testing without replacing the whole fitting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e316 stainless steel alloy construction helps resist corrosion in saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003eFlush exterior profile reduces the chance of damage from hull scrapes, dock contact, or gear brushing against the fitting.\u003c\/li\u003e\n\u003cli\u003eAccepts standard 5\/8 inch inner diameter marine fuel vent hose.\u003c\/li\u003e\n\u003cli\u003eFits hulls up to 7\/8 inch thick with a 1-3\/8 inch installation hole.\u003c\/li\u003e\n\u003cli\u003eRemovable cap allows filter cleaning and fuel system pressure testing with a hex head wrench.\u003c\/li\u003e\n\u003cli\u003eSupplied with two silicone gaskets to support a sealed installation at the hull.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fuel vent is offered in two configurations for different hose routing needs.\u003c\/p\u003e\u003cp\u003eThe vent body, 316 stainless steel alloy construction, 5\/8 inch hose fit, 7\/8 inch maximum hull thickness, and 1-3\/8 inch installation hole are consistent across the listed versions. The difference is the vent outlet style.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e66031-3: Straight vent. This version works for installations where the vent hose can run directly from the fitting without needing an immediate change in direction.\u003c\/li\u003e\n\u003cli\u003e66032-3: 90 vent. This version helps when space behind the hull is tighter or the hose needs to turn soon after the fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore drilling, confirm the mounting location has enough backing space for the selected straight or 90 degree hose path. The fitting is intended for a 1-3\/8 inch hull opening and should be paired with 5\/8 inch inner diameter fuel vent hose.\u003c\/p\u003e\u003cp\u003eThe flush face makes it a good match for hull sides, cockpit-adjacent areas, and exterior locations where a cleaner profile is preferred. As with any fuel system component, the vent should be installed so the hose runs without kinks, low traps, or sharp bends that could restrict tank breathing.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe removable cap gives practical access for cleaning the filter and pressure testing the fuel system. Periodic inspection is useful on boats that see salt spray, fuel splash, heavy washdowns, or long storage periods, especially around the gasket area and hose connection.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount fuel vent\u003c\/li\u003e\n\u003cli\u003eTwo silicone gaskets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Straight Vent","offer_id":51550268883190,"sku":"APL248569-V1","price":36.99,"currency_code":"USD","in_stock":true},{"title":"90 Vent","offer_id":51550268915958,"sku":"APL248569-V7","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0716204_apl248569.jpg?v=1787789329"},{"product_id":"apl174134","title":"Attwood Marine Fold-Down Dock Cleat, Aluminum, White Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Fold-Down Dock Cleat is a low-profile dock cleat for securing small boats and personal watercraft while keeping the dock surface cleaner when the cleat is not in use. It flips up when it is time to tie off a line, then folds down again so it is less likely to catch feet, dock carts, covers, or loose gear along the walking area.\u003c\/p\u003e\u003cp\u003eThis cleat is made from marine-grade aluminum with a corrosion-resistant finish, giving it a practical fit for docks exposed to rain, spray, sun, and regular washdowns. Both size options mount with two standard 3\/8-inch carriage bolts, which are not included, so hardware can be matched to the dock material and installation location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFold-down cleat keeps a lower profile on the dock when no line is attached.\u003c\/li\u003e\n\u003cli\u003eFlips up for normal tie-off use with dock lines on small boats and watercraft.\u003c\/li\u003e\n\u003cli\u003eMarine-grade aluminum construction with a corrosion-resistant finish for exposed dock environments.\u003c\/li\u003e\n\u003cli\u003eInstalls with two standard 3\/8-inch carriage bolts, allowing the fasteners to be matched to the dock structure.\u003c\/li\u003e\n\u003cli\u003eAvailable in 6-inch and 8-inch sizes to suit different dock layouts and line-handling needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fold-down dock cleat is offered in two size configurations. The cleat style, fold-down function, aluminum construction, corrosion-resistant finish, and 3\/8-inch carriage bolt mounting requirement are consistent across the range.\u003c\/p\u003e\u003cp\u003eThe size is the main difference between the variants, so the choice affects the amount of cleat length available for handling dock lines and the footprint on the dock surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12048-4: 6-inch size. This size works well where the dock area is limited or where a lower footprint is preferred for tying off smaller boats and watercraft.\u003c\/li\u003e\n\u003cli\u003e12049-4: 8-inch size. This size gives more cleat length for line handling while keeping the same fold-down dock-clearing function.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMount the cleat to a solid dock surface using two standard 3\/8-inch carriage bolts. The bolts are not included, which matters because dock materials vary, and the correct bolt length, washers, and backing support should be selected for the specific installation.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm that the cleat can fold down without hitting trim, edging, rub rail, dock boxes, or other hardware. It should be placed where a dock line can lead cleanly from the boat without creating a trip point or sharp angle.\u003c\/p\u003e\u003ch6\u003eUse on board and around the dock\u003c\/h6\u003e\u003cp\u003eThis cleat is a good match for docks used with small runabouts, fishing boats, tenders, pontoons, and personal watercraft. It is especially useful on narrow finger piers, swim platforms, and busy dock edges where exposed fixed cleats can get in the way when the slip is empty.\u003c\/p\u003e\u003cp\u003eFor seasonal use, rinse away salt, grit, and dock debris from the folding joint during normal cleaning so the cleat continues to move freely. Check the mounting hardware periodically, especially after storms, heavy wake exposure, or repeated high-load tie-offs.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"8\"","offer_id":51550277402870,"sku":"APL174134-V1","price":31.99,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":51550277435638,"sku":"APL174134-V8","price":17.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0716012_apl174134.jpg?v=1787789482"},{"product_id":"apl765966","title":"Attwood Marine Stainless Standard Gas Spring, 10 lb, 15 in Extended, 9.5 in Compressed, 10mm Socket","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine ST13-10-5 is a stainless gas spring hatch support with a 15.00 inch extended length, a 9.50 inch compressed length, and a 10 lb output force. It uses a 6mm rod x 15mm cylinder body and 10mm socket end fittings, so it is a direct replacement only when those measurements match the support already fitted to the boat.\u003c\/p\u003e\u003cp\u003eThis type of support is used to hold up lighter hatches and compartment lids without needing a manual prop. The stainless shell and rod, together with composite end fittings, make it a sensible choice around deck hatches, lockers, and other wet areas where corrosion is part of normal use.\u003c\/p\u003e\u003cp\u003eFor replacement work, the important checks are extended length, compressed length, stroke, end fitting style, and force rating. Matching all of those points helps the hatch open to the right angle and stay supported without putting extra load on hinges or brackets.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e15.00 inch extended length and 9.50 inch compressed length for hatch and lid setups that match this geometry\u003c\/li\u003e\n\u003cli\u003e10 lb output force suited to lighter hatch and compartment lid applications\u003c\/li\u003e\n\u003cli\u003e10mm socket end fittings for installations that use matching ball stud hardware\u003c\/li\u003e\n\u003cli\u003e6mm rod x 15mm cylinder size in Attwood's Stainless Standard gas spring range\u003c\/li\u003e\n\u003cli\u003eStainless steel shell and rod with composite end fittings that stand up better in wet marine spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis support is a match when the existing spring on the boat uses the same 15.00 inch open length, 9.50 inch closed length, 5.50 inch stroke, and 10mm socket ends. On hatch supports, small differences in length or socket style can change opening angle and closing load more than most owners expect.\u003c\/p\u003e\u003cp\u003eIt is a good fit for owners replacing a worn gas spring on a deck hatch, access lid, or storage compartment where the original support matches this size and force class. If the hatch uses two supports, check both sides before ordering so the lid does not end up lifting unevenly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore ordering, compare the old support end to end and confirm the socket hardware on the boat is the same 10mm style. Length, force, and end fittings matter more than the outside appearance, especially on boats where bracket placement is tight and hatch travel is limited.\u003c\/p\u003e\u003cp\u003eFor a clean replacement, match the new support to the existing mounting points rather than trying to make a near size work. That keeps the hatch movement predictable and helps avoid a lid that opens too far, will not stay open, or becomes hard to close.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550304862454,"sku":"APL765966","price":29.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322196_apl765966.webp?v=1787790344"},{"product_id":"apl866463","title":"Attwood Marine Fuel Primer Bulb, Low Permeation, EPA\/CARB Certified","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine primer bulb is a low-permeation hand primer for outboard fuel lines, available for 1\/4\", 5\/16\", and 3\/8\" inner diameter hose setups. It is used in the fuel line between a portable tank or onboard fuel supply and the engine, helping pull fuel through the line before starting.\u003c\/p\u003e\u003cp\u003eThe bulb uses a three-layer construction that resists collapse under vacuum and helps prevent ballooning or bursting under pressure. Its low-permeation material reduces fuel evaporation, while high-efficiency check valves support faster priming with low fuel restriction, including less than 1 kPa restriction at 50 liters per hour.\u003c\/p\u003e\u003cp\u003eThis is a practical replacement or rigging part for small outboards, tenders, fishing boats, and other gasoline-powered marine setups where the fuel line size needs to match the engine and tank connections. The bulb is compatible with ethanol-blended fuels and is EPA and CARB certified.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLow-permeation bulb helps reduce fuel evaporation in portable and outboard fuel systems.\u003c\/li\u003e\n\u003cli\u003eThree-layer construction resists vacuum collapse and pressure-related ballooning.\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency check valves help the line prime quickly with fewer hand pumps.\u003c\/li\u003e\n\u003cli\u003eLow fuel restriction, rated at less than 1 kPa at 50 liters per hour.\u003c\/li\u003e\n\u003cli\u003eWorks with ethanol-blended fuels used in many marine gasoline systems.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of 18°F to 122°F supports typical seasonal boating conditions.\u003c\/li\u003e\n\u003cli\u003eEPA and CARB certified for compliant fuel-system service.\u003c\/li\u003e\n\u003cli\u003eAvailable in 1\/4\", 5\/16\", and 3\/8\" hose inner diameter versions for common outboard fuel line sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis primer bulb range is offered in multiple hose inner diameter configurations so the fuel line connection can match the existing hose on the boat or engine rig.\u003c\/p\u003e\u003cp\u003eThe hose size is the key difference between the variants. The priming construction, low-permeation purpose, ethanol compatibility, and EPA and CARB certification are consistent across the listed versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e93014LP7: 1\/4\" inner diameter hose. This size fits fuel line systems that use 1\/4\" ID hose, often found on smaller outboard and portable fuel setups.\u003c\/li\u003e\n\u003cli\u003e93038LP7: 3\/8\" inner diameter hose. This version is for fuel systems using 3\/8\" ID hose where a larger fuel line is already part of the rigging.\u003c\/li\u003e\n\u003cli\u003e93516LP7: 5\/16\" inner diameter hose. This size suits installations built around 5\/16\" ID fuel hose, a common middle size for many outboard applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the variant to the inner diameter of the existing marine fuel hose, not the outside diameter. A primer bulb that does not match the hose size can be hard to seal and may create fuel delivery problems, especially when the line is under suction from the engine fuel pump.\u003c\/p\u003e\u003cp\u003eInstall the bulb in the correct fuel-flow direction, with the arrow or flow marking pointing toward the engine. It should be placed where it can be reached by hand, away from sharp bends, engine heat, and areas where gear or feet can press against the fuel line.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis primer bulb is a good match for boaters replacing an old, stiff, or slow-priming bulb in an outboard fuel line. It is also useful when rigging a new portable fuel tank hose assembly for a dinghy, skiff, jon boat, center console, or fishing boat.\u003c\/p\u003e\u003cp\u003eFor best results, inspect the full fuel line at the same time, including hose condition, clamps, connectors, and tank fittings. A fresh primer bulb can only work properly when the rest of the fuel path is clean, sealed, and sized correctly.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"5\/16\"","offer_id":51550340055286,"sku":"APL866463-V2","price":24.99,"currency_code":"USD","in_stock":true},{"title":"3\/8\"","offer_id":51550340088054,"sku":"APL866463-V5","price":24.99,"currency_code":"USD","in_stock":true},{"title":"1\/4\"","offer_id":51550340120822,"sku":"APL866463-V0","price":25.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0716210_apl866463.jpg?v=1787791393"},{"product_id":"apl716030","title":"Attwood Marine Bilge Pump Switch, 6-32V DC, 10A, Panel Mount, 1\/4 in Spade Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine bilge pump switch is a panel-mounted rocker switch for controlling a bilge pump from the helm, cockpit, or another accessible station on board. It is used with DC bilge pump circuits drawing 10 amps or less and supports 6V through 32V DC systems, making it suitable for many 12V and 24V boat installations.\u003c\/p\u003e\u003cp\u003eThe switch uses 1\/4 in. spade terminals and has a face plate measuring 2-13\/16 in. x 1-7\/8 in. It is a practical replacement or upgrade when a simple pump control panel is needed without adding a larger switch panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePanel-mounted rocker format for clean installation at the helm, console, cabin panel, or service area.\u003c\/li\u003e\n\u003cli\u003eSupports 6V through 32V DC bilge pump circuits with a maximum pump draw of 10 amps.\u003c\/li\u003e\n\u003cli\u003eUses 1\/4 in. spade terminals for straightforward wiring with common marine crimp connectors.\u003c\/li\u003e\n\u003cli\u003eFace plate measures 2-13\/16 in. x 1-7\/8 in. for a compact panel footprint.\u003c\/li\u003e\n\u003cli\u003eAvailable in 2-way and 3-way versions to match basic manual control or automatic bilge pump control layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis bilge pump switch is offered in two switch-position configurations for different bilge pump wiring setups.\u003c\/p\u003e\u003cp\u003eThe 2-way version is for simple On\/Off pump control. The 3-way version adds Auto\/Off\/Manual control for use with an automatic bilge pump or a float-switch controlled bilge system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7615-3: Switch positions 2-Way. This version gives straightforward On\/Off control when the operator wants direct manual control of the bilge pump circuit.\u003c\/li\u003e\n\u003cli\u003e7615A3: Switch positions 3-Way. This version gives Auto\/Off\/Manual control so the pump can be left in automatic mode, shut off, or run manually from the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the switch on a flat panel with enough depth behind it for the switch body and wiring. The circuit should be fused according to the bilge pump instructions, and all wiring should be secured so vibration and movement do not pull on the terminals.\u003c\/p\u003e\u003cp\u003eRun pump wiring so connections stay above the highest possible water level, and make water-resistant electrical connections in the bilge area. This switch is not external ignition protected, so it should not be installed where ignition-protected equipment is required.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch is a good match for small to mid-size boats that need a dedicated bilge pump control at the helm, console, or electrical panel. It works well for replacing a worn bilge rocker switch or adding a simple control point during a bilge pump installation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"2-Way","offer_id":51550342414582,"sku":"APL716030-V0","price":28.86,"currency_code":"USD","in_stock":false},{"title":"3-Way","offer_id":51550342447350,"sku":"APL716030-V1","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327722_apl716030.webp?v=1787791533"},{"product_id":"apl517993","title":"Attwood Marine All-Round Deck Mount Light, 12V, Flush Mount, Black Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 5940-7 is an all-round deck-mount navigation light for 12V systems. It has 7-inch leads for wiring, mounts flush to the deck, and uses a bayonet lock so the lens and cover can be removed for lamp service without replacing the whole fixture.\u003c\/p\u003e\u003cp\u003eThis is a low-profile light for boats where a raised base is not wanted. It is commonly used atop the tow point on ski and wakeboard towers, and it also fits other flat mounting spots where a compact all-round light makes more sense than a pole light.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC light with 7-inch leads for a straightforward hard-wired connection\u003c\/li\u003e\n\u003cli\u003eFlush deck-mount body with no raised base, useful where clearance and a clean install matter\u003c\/li\u003e\n\u003cli\u003eBayonet lock holds the lens and cover in place and makes lamp replacement easier\u003c\/li\u003e\n\u003cli\u003eInstalls directly to the mounting surface with two #10 fasteners\u003c\/li\u003e\n\u003cli\u003eBlack housing with a clear lens and an included wedge base lamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light is best suited to a fixed deck or tower surface where the wiring can be brought to the base cleanly. The 7-inch leads work well when the connection point is close to the light or when the wiring is extended below the mounting surface as part of the installation.\u003c\/p\u003e\u003cp\u003eBecause it sits flush, it is a practical choice for spots where a taller light base would be in the way or look out of place. Buyers should confirm a 12V circuit is available and that the chosen mounting location gives the all-round light the clear placement their boat requires.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fits owners setting up a ski boat or wake boat tower and anyone who needs an all-round navigation light in a compact deck-mounted format. It also suits refit work where easy access to the lamp matters and there is not much room for a taller assembly.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550345593078,"sku":"APL517993","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698552_apl517993_jpeg.jpg?v=1787791658"},{"product_id":"apl474273","title":"Attwood Marine Stainless Steel Scupper Valve, Barbed, 1-1\/2 in Hose","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 66553-3 is a stainless steel scupper valve with a barbed outlet for 1-1\/2 inch I.D. hose. It is used on self-bailing cockpit drains and installs in a 2 inch hole, with a standard thread length that fits hull or transom thickness up to 3 inches. The overall length is 5-1\/2 inches.\u003c\/p\u003e\u003cp\u003eThe body is cast in enhanced 316 stainless steel with a polished finish and passivation for added corrosion resistance. A neoprene flap with a molded V opens to drain cockpit water and closes to help limit backwash, which is useful on boats that take spray at rest or while backing down.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2 inch I.D. cockpit drain hose\u003c\/li\u003e\n\u003cli\u003eUses a 2 inch installation hole and fits hull or transom thickness up to 3 inches\u003c\/li\u003e\n\u003cli\u003eEnhanced 316 stainless steel body with a polished, passivated finish\u003c\/li\u003e\n\u003cli\u003eNeoprene scupper flap with molded V helps reduce water washing back into the cockpit\u003c\/li\u003e\n\u003cli\u003eBarbed tail leaves room for secure hose clamping at the drain connection\u003c\/li\u003e\n\u003cli\u003eWrench fitting and sealant groove under the flange help make installation more controlled from inside the hull\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis fitting is for above-waterline use. On a self-bailing cockpit it mounts in the transom or hull, with the outlet set at least 12 inches above the maximum water line. The hose run should fall from the cockpit drain to the scupper so water can move out of the deck drain without pooling in the line.\u003c\/p\u003e\u003cp\u003eFor replacement work, check three points before ordering: 1-1\/2 inch I.D. hose, a 2 inch cutout or hole saw size, and enough depth for the 3-1\/2 inch thread section and 5-1\/2 inch overall length. The barbed tail and inside-hull tightening nut make it a practical fit where access is available from inside the transom.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis scupper valve suits center consoles, bay boats, walkarounds, and other boats with self-bailing decks that use a 1-1\/2 inch drain hose at the cockpit outlet. It also makes sense for refit work where the existing drain layout already matches the hose size, cutout, and above-waterline mounting position.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550367318262,"sku":"APL474273","price":102.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713616_apl474273.jpg?v=1787792223"},{"product_id":"apl416423","title":"Attwood Marine Telescoping Paddle, High-Impact Plastic Blade, Aluminum Pole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Telescoping Paddle is a compact emergency paddle for canoes, small boats, tenders, and other craft where storage space is limited but manual propulsion still needs to be available on board. It telescopes for use and collapses for stowing in a locker, under a seat, or with safety gear.\u003c\/p\u003e\u003cp\u003eThis paddle range is offered in 3.5 ft and 4.5 ft lengths, with the longer version extending to 54 in. The blade is made from high impact plastic, and the pole uses corrosion-resistant aluminum for use around freshwater or saltwater gear.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTelescoping construction helps the paddle fit into small storage spaces when it is not in use.\u003c\/li\u003e\n\u003cli\u003eAvailable in 3.5 ft and 4.5 ft lengths to match different boats and stowage areas.\u003c\/li\u003e\n\u003cli\u003eHigh impact plastic blade handles the knocks that come with use in small craft and dockside storage.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant aluminum pole suits the wet environment found around canoes, dinghies, tenders, and utility boats.\u003c\/li\u003e\n\u003cli\u003eUseful as backup propulsion when an engine, battery, or current leaves a small boat needing manual control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Telescoping Paddle is offered in two length configurations. Both are the same product style, with the main difference being the extended paddle length.\u003c\/p\u003e\u003cp\u003eThe shorter version favors tighter storage, while the longer version gives extra reach from the seat or cockpit. The blade and pole construction remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e11828-1: Length 3.5 ft. This version suits small craft where compact storage is the main concern, such as a canoe, tender, or emergency gear compartment.\u003c\/li\u003e\n\u003cli\u003e11826-1: Length 4.5 ft. This version gives more reach and leverage, which can help when paddling from a higher seat, a wider small boat, or a more open cockpit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis paddle is a practical fit for boaters who want a simple backup tool that does not take over a locker. It is well suited for small vessels, auxiliary craft, fishing skiffs, and tenders where a full-size fixed paddle may be awkward to carry.\u003c\/p\u003e\u003ch6\u003eStorage and care\u003c\/h6\u003e\u003cp\u003eRinse the paddle with fresh water after saltwater use, especially around the telescoping section. Let it dry before long-term storage so grit and moisture do not sit inside the moving parts.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"3.5 ft","offer_id":51550367482102,"sku":"APL416423-V1","price":21.19,"currency_code":"USD","in_stock":false},{"title":"4.5 ft","offer_id":51550367514870,"sku":"APL416423-V2","price":30.54,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327599_apl416423.jpg?v=1787792231"},{"product_id":"apl147610","title":"Attwood Marine Lift 'n Lock Anchor Control, 20 lb Anchor Capacity","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Lift 'n Lock Anchor Control is a manual anchor lift and pulley system for small boats that need a simple way to raise, hold, and release an anchor without installing an electric windlass. It supports anchors up to 20 lb and works with 1\/4-inch to 7\/16-inch diameter anchor line, which is sold separately.\u003c\/p\u003e\u003cp\u003eThis anchor control is a practical fit for small open boats, fishing boats, tenders, and other light-duty setups where the anchor is handled often but electrical gear is not needed. The Lift 'n Lock mechanism helps keep the line under control during setting and retrieval, while the pulley and sheave arrangement keeps anchor handling more manageable from on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual lift-and-lock anchor control for raising, holding, and releasing an anchor on small boats.\u003c\/li\u003e\n\u003cli\u003eSupports anchors up to 20 lb when used with suitable anchor line and a properly installed setup.\u003c\/li\u003e\n\u003cli\u003eWorks with 1\/4-inch to 7\/16-inch diameter anchor line, sold separately.\u003c\/li\u003e\n\u003cli\u003ePulley and sheave layout helps control the anchor line without hand-over-hand strain at the bow.\u003c\/li\u003e\n\u003cli\u003eAvailable in Standard and Deluxe grades to match different construction preferences.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Lift 'n Lock Anchor Control is offered in two configurations. Both are manual anchor-control units for light-duty boat anchoring, with the grade being the main difference between versions.\u003c\/p\u003e\u003cp\u003eThe Standard grade uses zinc-plated steel construction with a nylon pulley system and steel sheave. The Deluxe grade uses high-impact reinforced nylon with stainless steel shafts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e13702-4: Grade Deluxe. This version uses high-impact reinforced nylon and stainless steel shafts, giving the anchor control hardware a corrosion-conscious build for use around the bow.\u003c\/li\u003e\n\u003cli\u003e13700-7: Grade Standard. This version uses zinc-plated steel, nylon pulleys, and a steel sheave for a straightforward mechanical anchor-control setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan the installation so the anchor line runs cleanly through the pulley system without sharp bends, rubbing points, or interference from cleats, rails, trolling motors, or bow hardware. Because the line is not included, line diameter and anchor weight should be matched to the selected configuration before mounting.\u003c\/p\u003e\u003cp\u003eThis is a mechanical anchor-control product, so it does not require 12V or 24V power, switches, breakers, or marine network integration. It is most useful where simple anchor handling matters more than powered retrieval, especially on small boats used for fishing, day cruising, or dockside anchoring.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Standard","offer_id":51550369382646,"sku":"APL147610-V2","price":12.71,"currency_code":"USD","in_stock":true},{"title":"Deluxe","offer_id":51550369415414,"sku":"APL147610-V1","price":16.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327455_apl147610.jpg?v=1787792295"},{"product_id":"apl381379","title":"Attwood Marine Incandescent All-Round Folding Pole Light, 54 in, 12V, 2-Pin Locking Collar, Articulating Anti-Glare","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 5340-54-7 is a 54 in. all-round navigation light with a folding pole and articulating anti-glare head. It gives 360 degree white light with 2-mile visibility, uses a 9-watt wedge-base incandescent lamp, and is rated for boats up to 39.4 ft. (12 m) in length.\u003c\/p\u003e\u003cp\u003eThis style of pole light works where the all-round light needs to sit at least 39-3\/8 in. (1 m) above the sidelights but a full-length rigid pole is awkward to store. The removable pole folds in half for stowage, and the articulating head helps keep the light aligned when the base is mounted on a flat or angled surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e54 in. removable pole that folds in half for easier storage between trips\u003c\/li\u003e\n\u003cli\u003e360 degree white all-round light with 2-mile visibility for boats up to 39.4 ft. (12 m)\u003c\/li\u003e\n\u003cli\u003eArticulating head adjusts 15 degrees forward and 15 degrees aft\u003c\/li\u003e\n\u003cli\u003eAnti-glare aperture blocks light 7.5 degrees below horizontal and keeps more of the beam at the horizon and above\u003c\/li\u003e\n\u003cli\u003e2-pin locking collar pole for compatible straight or angled plug-in bases\u003c\/li\u003e\n\u003cli\u003eMid-point hinge uses glass-filled composite construction with sheathed wiring at the fold\u003c\/li\u003e\n\u003cli\u003e9-watt wedge-base incandescent lamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light is used as an all-round white light or anchor light in systems that take a removable 2-pin locking collar pole. The 54 in. length is useful on boats with low stern decks or mounting points where a shorter pole would not place the light high enough above the sidelights.\u003c\/p\u003e\u003cp\u003eThe articulating head is helpful when the base is mounted on an angled gunwale or deck cap. It lets the light sit upright without forcing you to change the mounting location. Before ordering, check that your base accepts a 2-pin locking collar pole and that the installed height suits your boat layout.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for runabouts, center consoles, and fishing boats that remove the stern light after use and need a pole that stores more easily in a locker. It also makes sense for boats that are covered or trailered often, where a long one-piece pole is harder to handle and stow.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550374297846,"sku":"APL381379","price":65.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322510_apl381379.jpg?v=1787792542"},{"product_id":"apl420394","title":"Attwood Marine Kayak Foot Braces, For Sit-In and Sit-on-Top Kayaks, 15 in, Pair, Trigger Lock, Universal Mounting Hole Pattern","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11940-2 is a pair of 15 inch kayak foot braces with a trigger-lock adjustment system and a universal mounting hole pattern for a wide range of kayak layouts. It fits both sit-in and sit-on-top kayaks and gives you a firm bracing point for better leg drive, posture, and control while paddling.\u003c\/p\u003e\u003cp\u003eThis set works well as a replacement for worn foot pegs or as an upgrade on a kayak that needs a more secure foot position. The sliding adjustment makes day-to-day setup easier when the same boat is used by different paddlers, and the universal track pattern helps when matching existing mounting points or planning a fresh install.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of 15 inch foot braces for left and right foot support\u003c\/li\u003e\n\u003cli\u003eTrigger-lock adjustment lets you move the braces quickly to suit leg length and seating position\u003c\/li\u003e\n\u003cli\u003eUniversal mounting hole pattern works with many sit-in and sit-on-top kayak hulls\u003c\/li\u003e\n\u003cli\u003eLightweight design keeps added weight low in smaller paddle craft\u003c\/li\u003e\n\u003cli\u003eMounting hardware is not included, so fasteners can be matched to your kayak hull and backing method\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese foot braces are a practical match for recreational and fishing kayaks that need more dependable lower-body support through long paddles, current, or rougher water. They also make sense on older boats where the original foot support is missing, worn out, or hard to adjust.\u003c\/p\u003e\u003cp\u003eBefore ordering, check that your kayak has enough sidewall space for a 15 inch rail assembly and compare the hole spacing with your current setup if you are replacing an existing brace. Because hardware is not included, you can choose the fasteners, washers, and backing pieces that suit the hull thickness and access inside your kayak.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward when the mounting area is accessible from inside the hull or through a hatch. Set both rails square to the seat position, test the full adjustment range before drilling, and make sure each side moves freely without interfering with seat frames, storage, or rudder control lines.\u003c\/p\u003e\u003cp\u003eOnce installed, the trigger lock makes it easy to fine-tune foot position on the water or at launch. That added adjustment is useful for shared kayaks, rental fleets, or any setup where paddler leg length changes from trip to trip.\u003c\/p\u003e\u003ch6\u003eUse on the water\u003c\/h6\u003e\u003cp\u003eA solid foot brace changes how a kayak feels under power. It gives you a stable point to push against so your stroke stays more controlled and your seated position holds up better over distance, especially when you are paddling into wind, moving through boat wake, or making repeated corrective strokes.\u003c\/p\u003e\u003cp\u003eThis setup suits paddlers who want a cleaner replacement part without adding unnecessary complexity to the boat. It is also a sensible choice for kayaks that need easier adjustment but do not require a full steering pedal system.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550374723830,"sku":"APL420394","price":26.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322251_apl420394.webp?v=1787792555"},{"product_id":"apl927697","title":"Attwood Marine Vertical Mount Sidelight Pair, 2-Mile, 12V, Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 3838-1 is a 12-volt stainless steel vertical sidelight pair for the bow, with red and green lenses, 2 nautical mile visibility, and fit for boats up to 20 meters (65.6 ft.).\u003c\/p\u003e\u003cp\u003eIt mounts on a horizontal deck or gunwale surface, with the red light on port and the green light on starboard. Each light covers 112.5 degrees for the required 225-degree combined sidelighting arc, and the gasketed base helps seal the installation against water at the mounting surface.\u003c\/p\u003e\u003cp\u003eThis setup suits owners replacing a conventional incandescent sidelight pair or rigging a 12-volt boat that still uses serviceable festoon lamps and separate port and starboard lights.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-volt DC vertical sidelight pair with separate red port and green starboard lights\u003c\/li\u003e\n\u003cli\u003e2 nautical mile visibility for boats up to 20 meters, or 65.6 ft.\u003c\/li\u003e\n\u003cli\u003e112.5 degree visibility from each light for a 225 degree combined sidelighting arc\u003c\/li\u003e\n\u003cli\u003eStainless steel construction with a gasketed base for a water-resistant mounting surface seal\u003c\/li\u003e\n\u003cli\u003eUses 8-watt festoon lamps\u003c\/li\u003e\n\u003cli\u003eMeets USCG CFR 183.810 and ABYC A-16 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light set belongs on the bow where both fixtures can sit the same distance from the stem and shine straight ahead. It needs a clear line of sight with no rail bases, cleats, anchors, or other hardware blocking the side arc.\u003c\/p\u003e\u003cp\u003eElectrical fit is 12-volt DC only, so it matches boats with a standard 12-volt navigation light circuit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting uses a 3\/8 in. wire access hole and three #6 pan head stainless tapping screws. The wiring layout calls for 16-gauge wire, waterproof crimp connectors, marine non-silicone sealant, and a 1-amp fuse on the positive feed.\u003c\/p\u003e\u003cp\u003eThe outer cover and lens can be removed for installation and lamp service, which makes routine bulb replacement more straightforward when access is tight at the bow.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550390550774,"sku":"APL927697","price":102.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322210_apl927697.webp?v=1787793092"},{"product_id":"apl460730","title":"Attwood Marine Stainless Steel Scupper Valve, SS316, Neoprene Flap, Mirror Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Stainless Steel Scupper Valves is a range of barbed stainless steel scupper valves for cockpit, deck, and transom drain installations above the water line. These fittings combine a polished stainless exterior with an internal scupper flap that helps limit backwash when water pushes back toward the drain outlet.\u003c\/p\u003e\u003cp\u003eThis range covers 1-1\/2 in and 2 in hose sizes, giving boat builders and owners a straightforward way to match the valve to existing drain hose and hull thickness. The bodies use Enhanced 316 stainless steel alloy, and the barbed tail gives room for hose clamps at the connection point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEnhanced 316 stainless steel alloy body for drain outlets exposed to spray, washdowns, and saltwater air.\u003c\/li\u003e\n\u003cli\u003eScupper flap uses tough neoprene rubber with a molded V that seats into the grooved body to help reduce backwash.\u003c\/li\u003e\n\u003cli\u003eConcealed, corrosion-proof fasteners keep the outside face clean and reduce exposed hardware around the drain outlet.\u003c\/li\u003e\n\u003cli\u003eBarbed tail end leaves room for multiple hose clamps, which is useful where drain hose movement and vibration need a secure connection.\u003c\/li\u003e\n\u003cli\u003eChannel under the flange helps hold a bead of sealant during installation for a cleaner seal at the hull or transom surface.\u003c\/li\u003e\n\u003cli\u003eWrench flats or an end notch give the installer a gripping surface so the fitting can be tightened from inside the hull.\u003c\/li\u003e\n\u003cli\u003eIntended for installation above the water line only.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two hose-size configurations for matching different scupper drain runs.\u003c\/p\u003e\u003cp\u003eThe hose size, thread size, installation hole saw size, and maximum hull thickness change between the two variants. The scupper flap construction, stainless steel valve body, and above-waterline installation requirement remain consistent across these barbed scupper valve models.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e66553-1: 1-1\/2 in hose size. This version uses 1-1\/2 in NPSM threads, a 2 in installation hole saw size, and supports up to 3 in maximum hull thickness.\u003c\/li\u003e\n\u003cli\u003e66555-1: 2 in hose size. This version uses 2 in NPSM threads, a 2-1\/2 in installation hole saw size, and supports up to 2 in maximum hull thickness.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the valve to the inside diameter of the drain hose already on the boat, then confirm the hole saw size and available hull thickness before cutting or replacing an existing fitting. The 1-1\/2 in version has a 3 in flange outside diameter and 5-1\/2 in total length, while the 2 in version has a 3-5\/8 in flange outside diameter and 4-1\/2 in total length.\u003c\/p\u003e\u003cp\u003eBecause this is a scupper valve, placement matters. It belongs in an above-waterline drain outlet where the flap can help with backwash while still allowing deck or cockpit water to leave the boat. The barbed outlet should be paired with hose of the correct size and clamps suitable for the hose and installation environment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThese valves are a good match for owners, yards, and builders working on cockpit drains, deck drains, and transom scupper outlets where a stainless exterior is preferred over plastic. They make sense on fishing boats, center consoles, cruisers, and other vessels where drain outlets see spray, sun, and regular washdowns.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior with fresh water after saltwater use and inspect the flap during routine cleaning. A flap that is blocked by debris, marine growth, or hardened residue may not seat cleanly, so keeping the scupper area clear helps the valve drain properly and limit backwash as intended.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"1-1\/2\"","offer_id":51550402937078,"sku":"APL460730-V1","price":141.87,"currency_code":"USD","in_stock":false},{"title":"2\"","offer_id":51550402969846,"sku":"APL460730-V2","price":141.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327630_apl460730.jpg?v=1787793557"},{"product_id":"apl645693","title":"Attwood Marine Pro Series Heavy-Duty Rod Holder, For Casting and Spinning Rods, Combo Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 5010-4 is a heavy-duty Pro Series rod holder with a combo mount for boats that need flexible placement along the gunwale. It works with casting and spinning setups, can be mounted on the side or on top of the gunwale, and uses a large cam lever for up to 160 degrees of vertical adjustment.\u003c\/p\u003e\u003cp\u003eThe deep-tooth gear lock keeps the holder seated in its base when the boat is running or when a fish loads the rod. The throat opening fits rods up to 1-17\/32 inches in diameter, and the locking ring accepts spinning reel handle shanks up to 1-15\/32 inches. This makes it a practical fit for anglers rigging a cockpit, transom corner, or open fishing layout where rod angle and mounting position both matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombo mount supports installation on the side or on top of the gunwale\u003c\/li\u003e\n\u003cli\u003eWorks with casting and spinning rod and reel setups\u003c\/li\u003e\n\u003cli\u003eUp to 160 degrees of vertical adjustment for changing rod tip height through the day\u003c\/li\u003e\n\u003cli\u003eDeep-tooth gear lock holds the rod holder firmly in its mounting base\u003c\/li\u003e\n\u003cli\u003eRod throat opening fits rods up to 1-17\/32 inches in diameter\u003c\/li\u003e\n\u003cli\u003eLocking ring fits spinning reel handle shanks up to 1-15\/32 inches in diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis rod holder suits boats where the available mounting surface may be horizontal in one area and vertical in another. It also makes sense for fishing setups that change between trolling, drifting, and still-fishing, where a fixed rod angle can get in the way. Before installation, it is worth checking backing access, reel handle clearance, and swing room for the rod butt so the holder can be adjusted without fouling rails, coamings, or seating.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe combo mount gives more flexibility than a single-position base, but final holding strength still depends on the surface under it and the hardware used. On thinner fiberglass or aluminum, a backing plate can help spread the load. Mounting hardware is not included, so fasteners should be matched to the boat structure and the tackle loads the holder will see in use.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550409031926,"sku":"APL645693","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713341_apl645693.jpg?v=1787793865"},{"product_id":"apl035004","title":"Attwood Marine Clamp-On Ski Mirror, Universal Mount, Fits up to 1\/2 in Window Frames","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 13066-7 is a clamp-on ski mirror with a universal mount for windshield frames up to 1\/2 in. thick. It gives the helm a wider rear view with a curved mirror, which helps when towing a skier, wakeboarder, or tube and when keeping track of traffic behind the boat.\u003c\/p\u003e\u003cp\u003eThis setup works well on boats where drilling into the frame is not preferred. The soft-touch clamps help protect the window frame during installation, while the zinc-plated hardware and powder-coated shaft assembly are better suited to the wet, high-vibration conditions common on ski boats and runabouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClamp-on universal mount fits windshield frames up to 1\/2 in. thick\u003c\/li\u003e\n\u003cli\u003eCurved mirror gives a broader rearward view from the helm\u003c\/li\u003e\n\u003cli\u003eSoft-touch mounting clamps help reduce marks on windows and frames\u003c\/li\u003e\n\u003cli\u003eZinc-plated hardware stands up better to moisture than plain steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated shaft assembly adds protection in a marine environment\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting arrangement suits a wide range of windshield layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mirror is intended for boats with a framed windshield or similar mounting point that can accept a clamp. It is a practical fit for many ski boats, bowriders, and runabouts used for towing watersports, especially where the driver wants a clear view aft without changing the windshield frame.\u003c\/p\u003e\u003cp\u003eBefore ordering, the main checkpoint is frame thickness. The clamp is made for window frames up to 1\/2 in. thick, so that measurement matters more than overall boat length or engine size.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward because the mirror clamps into place rather than requiring holes in the frame. The soft-touch contact points help the mount sit securely while being easier on finished surfaces, which is useful on painted or coated windshield frames.\u003c\/p\u003e\u003cp\u003eOnce mounted, the curved glass helps the driver keep a skier or rider in view with fewer body movements at the helm. This makes it a sensible choice for boats that spend time towing family or guests and need a mirror that can be installed quickly and removed when not in use.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550409687286,"sku":"APL035004","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713353_apl035004.jpg?v=1787793882"},{"product_id":"apl368032","title":"Attwood Marine LightArmor Bi-Color Bow Mount Navigation Light, 12V, 2NM, IP67, Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine NV2002SS-7 is a deck-mount bi-color bow navigation light with red and green LEDs, 2 nautical mile visibility, and an IP67 rating. It uses a round 304 stainless steel housing and is rated for boats up to 20 meters (65.6 feet) in length on a 12 VDC system with a 1-amp fuse.\u003c\/p\u003e\u003cp\u003eThis light sits low on the bow and combines port and starboard output in one housing, which helps when space is tight at the stem or when you want a cleaner deck layout than separate side lights. The LED engine is rated for more than 50,000 hours, stays cool in use, and the telltale indicators on top make it easy to confirm that the light is operating before you leave the dock.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBi-color red and green LED bow light in one round deck-mount housing\u003c\/li\u003e\n\u003cli\u003e2 nautical mile visibility for boats up to 20 meters (65.6 feet)\u003c\/li\u003e\n\u003cli\u003e304 stainless steel housing with a polycarbonate lens\u003c\/li\u003e\n\u003cli\u003eIP67-rated construction for spray, rain, and washdowns on deck\u003c\/li\u003e\n\u003cli\u003e12 VDC operation with color-indicated wire cores and a 1-amp fuse requirement\u003c\/li\u003e\n\u003cli\u003eDual telltale indicators on top of the housing show when the light is on\u003c\/li\u003e\n\u003cli\u003eBuilt to the navigation light requirements referenced for EN\/ISO 19009:2015, USCG CFR 183.810, ABYC A-16, and 1972 COLREGS installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it on the bow centerline on a horizontal surface that stays within plus or minus 5 degrees when the boat is floating. The light needs a clear forward view with no rail bases, cleats, anchors, or other deck hardware blocking the port or starboard sectors.\u003c\/p\u003e\u003cp\u003eWiring is straightforward, but it is a 12-volt light only. Use marine-grade crimp connectors with waterproof insulation, protect the connections below deck, and place a 1-amp fuse in the positive feed. The installation pattern calls for a 3\/8 inch wire clearance hole and pilot holes for the mounting screws, using the gasket as the template.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a sensible match for small to mid-size powerboats and sailboats that need a fixed bi-color bow light rather than separate side lights or a raised combination light. The low deck-mount profile works well on bows where rails, anchors, or trolling motor gear leave limited room for taller hardware.\u003c\/p\u003e\u003cp\u003eBecause this is a combined bow light, fit depends as much on location as on voltage and visibility range. Check that your bow can take the round base on centerline and that the light will stay unobstructed through normal anchoring, docking, and trailering.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550411096310,"sku":"APL368032","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698542_apl368032_jpeg.jpg?v=1787793989"},{"product_id":"apl149378","title":"Attwood Marine Boat Seat Pedestal Set, Lock'N-Pin, Non-Threaded, 3\/4 in Pin, 11 in Post, 7 x 7 in Stainless Steel Base","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 97739 is a non-threaded 3\/4 inch Lock'N-Pin pedestal set for a fixed-height boat seat installation, with an 11 inch brushed aluminum post, a 7 inch x 7 inch stainless steel base plate, and a seat mount with spring. The base uses a nylon bushing, and the pin-style setup keeps the post removable when you need the deck clear.\u003c\/p\u003e\u003cp\u003eThis kit suits fishing seats and passenger seating where you want a straightforward pedestal without threaded parts. It carries ABYC Code B, so it is not for a helm or driver position.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNon-threaded 3\/4 inch Lock'N-Pin pedestal system\u003c\/li\u003e\n\u003cli\u003e11 inch brushed aluminum post for a fixed seating height\u003c\/li\u003e\n\u003cli\u003e7 inch x 7 inch stainless steel base plate with nylon bushing\u003c\/li\u003e\n\u003cli\u003eBlack E-coated seat mount with spring included in the set\u003c\/li\u003e\n\u003cli\u003eLock'N-Pin connection helps prevent unintentional detachment\u003c\/li\u003e\n\u003cli\u003eABYC Code B rating for non-helm seating positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis set works within Attwood 3\/4 inch Lock'N-Pin seating hardware and should not be mixed with pedestal parts from other manufacturers. Before ordering, check that a 7 inch x 7 inch deck base matches the available mounting area and that the seat you plan to use is compatible with this style of seat mount.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe stainless base plate suits decks and casting platforms where you want a fixed pedestal that can still be removed at the pin. The included spring seat mount adds some give at the seat, which is useful on boats where the seat is regularly installed for use and removed for storage, cleaning, or extra deck space.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e11 inch brushed aluminum post\u003c\/li\u003e\n\u003cli\u003eBlack E-coated seat mount with spring\u003c\/li\u003e\n\u003cli\u003e7 inch x 7 inch stainless steel base plate\u003c\/li\u003e\n\u003cli\u003eNylon bushing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550414635254,"sku":"APL149378","price":119.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1100570_apl149378jpg.jpg?v=1787794196"},{"product_id":"apl744574","title":"Attwood Marine Heavy-Duty Adjustable Transom Saver, Roller\/Bolt-On Mount, Pro-Adjustable Head, Clear Anodized Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Heavy Duty Transom Saver is an adjustable motor support for trailered boats with outboard engines, built to help carry the cantilevered weight of the motor instead of leaving that load on the transom alone. This range covers three length spans, from 24\" to 36\", 32\" to 44\", and 44\" to 56\", so the support can be matched to the distance between the trailer and the lower unit on different boat and trailer setups.\u003c\/p\u003e\u003cp\u003eIt is made for the real stress points of trailering: road vibration, trim and tilt load, steering movement, and the repeated shock that comes from towing over uneven pavement. The heavy duty head holds the engine, while replaceable rubber pads help cushion the contact area. Roller and bolt-style trailer mounting options give the installer flexibility when matching the support to the trailer layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable transom saver range for outboard support while the boat is being trailered.\u003c\/li\u003e\n\u003cli\u003eHelps support the cantilevered weight of a tilted outboard motor to reduce strain on the transom during transport.\u003c\/li\u003e\n\u003cli\u003eStabilizes the engine and steering mechanism so the outboard is less likely to bounce or swing while towing.\u003c\/li\u003e\n\u003cli\u003eHeavy duty head secures the motor at the support point.\u003c\/li\u003e\n\u003cli\u003eReplaceable rubber pads on the adjustable head help cushion engine contact and extend service life.\u003c\/li\u003e\n\u003cli\u003eRoller and bolt-style trailer mounting options support common trailer setups.\u003c\/li\u003e\n\u003cli\u003eAluminum construction with a clear anodized tube for trailering use around marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis transom saver is offered in multiple adjustable lengths so the support can be matched to the boat, trailer, and outboard position.\u003c\/p\u003e\u003cp\u003eThe main difference between variants is the length range. The heavy duty head, roller\/bolt mounting style, and replaceable rubber pad design remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSP-4000-ADJ-RB: Length range 24\" to 36\". This shorter range suits setups where the trailer support point sits closer to the outboard lower unit.\u003c\/li\u003e\n\u003cli\u003eSP-424-ADJ-RB: Length range 32\" to 44\". This mid-range option covers many common trailer and outboard spacing needs.\u003c\/li\u003e\n\u003cli\u003eSP-436-ADJ-RB: Length range 44\" to 56\". This longer range is for installations where the trailer support point is farther from the engine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, measure the distance from the intended trailer mounting point to the outboard support point with the engine in its trailering position. The selected length range should allow the transom saver to sit securely without forcing the motor up or leaving the support loose.\u003c\/p\u003e\u003cp\u003eThe trailer end can be set up for roller or bolt-style mounting, depending on the trailer layout. Once fitted, the support should hold the outboard steady while still allowing the motor and trailer hardware to sit naturally, without side load or binding.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis product is a practical match for boat owners who trailer an outboard-powered boat to ramps, storage, service yards, fishing spots, or weekend cruising locations. It is especially useful when the boat sees regular road miles and the outboard is carried in a raised position during transport.\u003c\/p\u003e\u003cp\u003eLike any trailering support, it should be checked as part of the pre-tow routine. Confirm that the head is seated, the trailer mount is secure, the length adjustment is locked, and the rubber pads are in usable condition before heading out.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"24\"-36\"","offer_id":51550417191158,"sku":"APL744574-V1","price":82.65,"currency_code":"USD","in_stock":true},{"title":"44\"-56\"","offer_id":51550417223926,"sku":"APL744574-V3","price":94.95,"currency_code":"USD","in_stock":true},{"title":"32\"-44\"","offer_id":51550417256694,"sku":"APL744574-V2","price":96.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327733_apl744574.jpg?v=1787794276"},{"product_id":"apl112884","title":"Attwood Marine Handheld LED Spotlight, 12V, 400 Lumens","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11794-7 is a handheld 12V LED spotlight built for boats that need a simple, portable light source without adding another fixed fixture. It uses a 5 watt LED, puts out up to 400 lumens, and plugs into a standard 12V accessory socket with a 10 foot power cord.\u003c\/p\u003e\u003cp\u003eThis is the kind of light that works well when you need to check the shoreline, find the launch area after dark, watch for shallow water, or pick out obstacles around the dock. The yellow and black housing is easy to spot in a locker or emergency kit, and the LED power indicator shows when the unit is receiving power.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V operation with a cigarette-style accessory plug for boats that already have a matching outlet at the helm, in the cockpit, or in the cabin\u003c\/li\u003e\n\u003cli\u003eUp to 400 lumens from a 5 watt LED for close-range and general nighttime visibility on board\u003c\/li\u003e\n\u003cli\u003e10 foot power cord gives more freedom to move the light where it is needed instead of being tied to the outlet location\u003c\/li\u003e\n\u003cli\u003eLED power indicator confirms the light is receiving power before use\u003c\/li\u003e\n\u003cli\u003eYellow and black housing is easier to find quickly in low light or emergency storage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis spotlight is a good match for boats with a 12V accessory receptacle and for owners who want a portable light rather than a hardwired searchlight. It is not the right choice for a 24V-only system unless the boat already has a suitable 12V outlet or converter in place.\u003c\/p\u003e\u003cp\u003eBecause it is handheld, there is no deck cutout, bracket, or permanent mounting position to plan around. The main fit question is whether your boat has the correct 12V socket and whether a 10 foot cord gives enough reach from that outlet to the areas you want to illuminate.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light makes sense for small runabouts, center consoles, trailer boats, and sailboats that need a portable beam for docking, loading gear after sunset, or keeping a backup light on board. It also suits boaters who want a spotlight that can be stowed away and grabbed quickly when visibility drops.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550419026166,"sku":"APL112884","price":39.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322603_apl112884.webp?v=1787794408"},{"product_id":"apl660338","title":"Attwood Marine Paddle Clips, For 1 in Paddles, 2pk, Stainless Steel Hardware, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11780-6 is a set of two black paddle clips that hold a paddle with a 1 inch shaft on a kayak or canoe. The pair gives you a dedicated place to secure the paddle when you need both hands free for rigging, fishing, taking photos, or resting between strokes.\u003c\/p\u003e\u003cp\u003eThis set includes two clips and stainless steel mounting hardware, so it is ready for a straightforward install on paddle craft where keeping the paddle close at hand matters more than loose storage. It works well when you want the paddle parked in one repeatable spot instead of laying it across the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits paddles with a 1 inch shaft diameter\u003c\/li\u003e\n\u003cli\u003eTwo-clip set supports one paddle at two contact points\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware is included\u003c\/li\u003e\n\u003cli\u003eKeeps the paddle attached to the boat during hands-free tasks or short rest stops\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit comes down to shaft diameter. This set is made for paddles with a 1 inch shaft, so it is worth checking the shaft itself before ordering rather than going by blade size or overall paddle length.\u003c\/p\u003e\u003cp\u003eBecause the set uses two clips, spacing matters. Mounting the clips so the shaft sits naturally in both points makes the paddle easier to grab from the seat and helps keep it from shifting around while the boat is drifting or being carried.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe included stainless steel hardware covers the basic mounting parts, but the best placement depends on your boat layout and how you reach for the paddle from your normal seating position. A flat mounting surface and enough spacing for the shaft to rest cleanly in both clips will give the neatest result.\u003c\/p\u003e\u003cp\u003eThis is a good match for paddlers who want a fixed storage point for one paddle instead of laying it loose across the boat or tucking it under deck rigging. It suits fishing kayaks, recreational kayaks, and canoes where quick access and a tidier deck are more useful than a larger storage setup.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo paddle clips\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550443077878,"sku":"APL660338","price":10.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713304_apl660338.jpg?v=1787794872"},{"product_id":"apl393034","title":"Attwood Marine Swivl-Eze Deck Mounted Seat Slide, For Stamped\/Welded or Cast Seat Mounts, 1-5\/8 in Height, Aluminum, Front Control","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 815000 is a deck-mounted seat slide for adding fore-and-aft seat adjustment to boats that use stamped or welded seat mounts, or cast seat mounts that were not originally equipped with a slider. It mounts directly to the deck, uses front control operation, and keeps the overall installed height to 1-5\/8 inches.\u003c\/p\u003e\u003cp\u003eThis is a practical upgrade when an older seating setup needs more adjustment without changing the whole base system. The aluminum construction makes sense at deck level where seat hardware sees spray, wet shoes, and regular washdowns, and the included adapters help when a post installation or swivel location needs to be changed during a retrofit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDeck-mounted slide for adding seat adjustment without replacing the full seating setup\u003c\/li\u003e\n\u003cli\u003e1-5\/8 inch total height keeps the installed profile low\u003c\/li\u003e\n\u003cli\u003eAluminum construction suits exposed mounting locations around the cockpit\u003c\/li\u003e\n\u003cli\u003eFront control release is easier to reach once the seat is installed\u003c\/li\u003e\n\u003cli\u003eWorks with stamped and welded seat mounts, plus cast seat mounts that were not originally equipped with a slider\u003c\/li\u003e\n\u003cli\u003eAdapters are included for changing a post installation or swivel location\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis slide is best matched to retrofit projects where the seat base itself is still serviceable, but the seating position needs more travel and easier adjustment. Before ordering, check the deck footprint available under the seat and confirm that your current mount style matches the supported stamped, welded, or cast configurations.\u003c\/p\u003e\u003cp\u003eBecause it mounts directly to the deck, it is useful where pedestal height needs to stay in check and where a seat that slides too high would change sightlines or leg position at the helm. It also helps on shared boats where different drivers or anglers need the same seat to land in a comfortable position.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThe front control is handy in layouts where the rear of the seat sits close to a console, bulkhead, or livewell and there is not much room to reach behind the base. On a refit, the included adapters give more flexibility when the old post location or swivel position does not line up with the new seating plan.\u003c\/p\u003e\u003cp\u003eThis is a sensible match for owners updating a helm seat, a fishing seat, or another primary seating position where a small change in fore-and-aft position makes a real difference over a long day on the water.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550450024694,"sku":"APL393034","price":210.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713556_apl393034.jpg?v=1787795109"},{"product_id":"apl496150","title":"Attwood Marine Fixed Eye Utility Snap Hook, Zinc-Plated Steel, Spring-Loaded Closure","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Utility Snap Hook is a spring-loaded snap hook for making quick utility connections on board, with light-duty and heavy-duty versions for different safe-load needs. It is useful for securing loose gear, connecting tie-down lines, clipping utility rope, and creating temporary attachment points around a boat, trailer, dock box, or storage area.\u003c\/p\u003e\u003cp\u003eThe range includes a 1\/4 in ring diameter option rated for a 500 lbs maximum safe load and a 5\/8 in ring diameter option rated for a 2,500 lbs maximum safe load. Zinc-plated steel construction and a spring-loaded closure make the hook practical for marine utility work where fast attachment and removal matter, while the load rating helps match the hook to the job.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSpring-loaded closure helps the hook clip on and release quickly without a separate pin or latch.\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel construction suits general marine utility use when the hook is rinsed and maintained after saltwater exposure.\u003c\/li\u003e\n\u003cli\u003eAvailable in light-duty and heavy-duty configurations so the safe-load rating can match the line, gear, or tie-down point being used.\u003c\/li\u003e\n\u003cli\u003eRing diameter options of 1\/4 in and 5\/8 in support different rope, cable, and attachment setups.\u003c\/li\u003e\n\u003cli\u003eUseful for non-permanent connections on boats, trailers, docks, storage lockers, and general waterfront gear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis utility snap hook is offered in two configurations with different duty ratings, ring diameters, and maximum safe loads.\u003c\/p\u003e\u003cp\u003eBoth variants use a spring-loaded snap-hook format and zinc-plated steel construction. The main difference is the working capacity and ring size, which affects how the hook pairs with rope, cable, straps, or hardware already on the boat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7653L3: Light-duty version with 1\/4 in ring diameter and 500 lbs maximum safe load. This size works well for lighter utility tie-downs, loose gear control, and quick connections where a smaller ring is easier to fit through compact hardware.\u003c\/li\u003e\n\u003cli\u003e7640-3: Heavy-duty version with 5\/8 in ring diameter and 2,500 lbs maximum safe load. The larger ring and higher safe-load rating suit heavier utility connections where the hook needs to work with larger line, cable, or attachment points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eNo electrical setup, drilling, or network connection is involved. Match the ring diameter to the line, cable, strap, or fixed eye being used, then clip the snap hook into place and confirm that the spring closure returns fully before loading it.\u003c\/p\u003e\u003cp\u003eThis hook is for utility securing and connection tasks, not for lifting people, overhead lifting, life-safety use, towing beyond its stated safe load, or permanent mooring loads. The safe-load rating should be treated as the upper limit for the hook itself, while the complete setup is only as strong as the weakest connected part.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eZinc-plated steel gives the hook a protective finish for general marine use, but it is not the same as stainless steel. After saltwater exposure, rinse with fresh water, dry the hook when practical, and check the spring action and plating condition during routine gear inspection.\u003c\/p\u003e\u003cp\u003eThis snap hook is a practical match for boat owners who need a simple connection point for cockpit gear, trailer accessories, dockside lines, storage items, or fishing and cruising equipment that is clipped on and removed often.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"5\/8 in \/ Heavy-Duty \/ 2,500 lbs","offer_id":51550527815926,"sku":"APL496150-V2","price":11.16,"currency_code":"USD","in_stock":false},{"title":"1\/4 in \/ Light-Duty \/ 500 lbs","offer_id":51550527848694,"sku":"APL496150-V1","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327677_apl496150.jpg?v=1787796085"},{"product_id":"apl009288","title":"Attwood Marine Launch Line, 5\/16 in x 30 ft, Solid Braid MFP, Spring Hook","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11732-7 is a 5\/16 in. x 30 ft. launch line for handling a boat while launching or loading at the ramp. It uses a solid braid multifilament polypropylene line with a spring hook and foam grip, and it floats, dries quickly, and resists UV exposure.\u003c\/p\u003e\u003cp\u003eThis is the kind of line that helps keep the boat within reach when you are walking it off the trailer, guiding it alongside the dock, or bringing it back in for loading. The 30 ft. length gives you working room at the ramp, while the 5\/16 in. diameter stays easy in the hand for short, controlled moves. The blue color is also easier to spot on the water and around the trailer.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5\/16 in. diameter and 30 ft. length for launch-ramp handling and short dockside control\u003c\/li\u003e\n\u003cli\u003eSolid braid multifilament polypropylene line that stays afloat for easier retrieval at the ramp\u003c\/li\u003e\n\u003cli\u003eSpring hook attached for quick connection when you need to secure or guide the boat\u003c\/li\u003e\n\u003cli\u003eFoam grip gives you a more comfortable handhold during launching and loading\u003c\/li\u003e\n\u003cli\u003eBlue line that dries quickly and stands up to UV exposure in open-air marine use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis line fits boaters who want a dedicated handling line rather than using a regular dock line for every ramp stop. It works well where you need enough reach to control the boat from the trailer, dock, or shoreline without dealing with extra bulk.\u003c\/p\u003e\u003cp\u003eBecause it floats, it is easier to keep track of near the hull and easier to recover if it drops in the water. That makes it a practical choice for small fishing boats, runabouts, skiffs, and similar trailerable boats where one person often manages the boat during launch or retrieval.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis product makes the most sense for boaters who launch often and want a line that is kept ready for that specific job. It suits freshwater and saltwater use where sun exposure, wet storage, and repeated handling at the ramp are part of normal boating.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550534041846,"sku":"APL009288","price":16.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713646_apl009288.jpg?v=1787796234"},{"product_id":"apl908709","title":"Attwood Marine Anchor Lift System, 12 lb Anchor Capacity, Bow or Stern Mount, Heavy-Gauge Powder-Coated Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 13710-4 is an anchor lift system for smaller anchoring setups that gives you a fixed reel-and-guide arrangement for dropping, retrieving, and stowing the anchor from the boat. It is rated for anchors up to 12 lb and the reel is sized for up to 100 ft of 3\/16 in. anchor rope.\u003c\/p\u003e\u003cp\u003eIt mounts at the bow or stern corner on many boats and keeps the anchor secured in the mount housing when it is not in use. Heavy-gauge steel parts with a powder-coated finish help it stand up to regular exposure around the rail and deck edge, while the manual release knob and lift handle keep operation straightforward.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRated for anchors up to 12 lb\u003c\/li\u003e\n\u003cli\u003eRope reel capacity of up to 100 ft of 3\/16 in. anchor rope\u003c\/li\u003e\n\u003cli\u003eManual release knob drops the anchor and lift handle retrieves it\u003c\/li\u003e\n\u003cli\u003eAnchor stores in the mount housing when not in use\u003c\/li\u003e\n\u003cli\u003eMounting layout suits bow or stern corner installation on many boats\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge steel construction with a powder-coated finish\u003c\/li\u003e\n\u003cli\u003eBoat-specific mounting hardware is not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis system needs a mounting area with enough support for the load and enough clearance for the reel and rope to run freely. On boats with a deck or without an opening in the bow plate, a 3\/4 in. clearance hole may be needed below the rear roller so the rope can pass cleanly.\u003c\/p\u003e\u003cp\u003eThe instructions call for 1\/4 in. bolts or screws chosen for the boat's construction, and some installations may also need rope guides or swivel pulleys to keep the line clear of obstructions and reduce chafe. The system uses 3\/16 in. anchor rope, and the routing matters as much as the mounting position.\u003c\/p\u003e\u003ch6\u003eFit and onboard use\u003c\/h6\u003e\u003cp\u003eThis setup makes the most sense on boats running a lighter anchor where a bow or stern corner mount is practical and where keeping the deck edge clear matters. The enclosed stowage point helps keep the working area tidier than a loose anchor and line left on deck.\u003c\/p\u003e\u003cp\u003eFor day boats and other smaller craft, it gives you a mechanical anchoring setup without adding electrical wiring or switch gear. When running at higher speed, in rough water, or during trailering, the anchor should be moved inside the boat rather than left on the lift.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eThe unit comes lubricated and should be re-lubricated periodically to keep the reel and guide moving freely. After use in salt or brackish water, a fresh-water rinse helps clear residue, and the reel and guide benefit from waterproof grease and light oil in the service points called out for routine care.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAnchor mount \/ rope guide assembly\u003c\/li\u003e\n\u003cli\u003eAnchor rope reel assembly\u003c\/li\u003e\n\u003cli\u003eAnchor mount rear pulley\u003c\/li\u003e\n\u003cli\u003eRear pulley axle\u003c\/li\u003e\n\u003cli\u003e2 push nuts\u003c\/li\u003e\n\u003cli\u003e6 nylon washers\u003c\/li\u003e\n\u003cli\u003eInstruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550564581622,"sku":"APL908709","price":63.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322394_apl908709.webp?v=1787796564"},{"product_id":"apl048817","title":"Attwood Marine Braided Nylon Rope, 3\/16 in x 100 ft, White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 117553-7 is a 3\/16 in x 100 ft white braided nylon rope used for anchor line and dock line duties on boats. Its solid braided construction keeps a round profile that resists flattening, and nylon stretch helps the line take up sudden shock loads when the boat moves against wake, wind, or tide.\u003c\/p\u003e\u003cp\u003eThis rope is made from high-tenacity multifilament nylon fiber and is stabilized for light and heat exposure. It stays flexible in use and resists rot, oil, gasoline, grease, marine growth, and most common chemicals found around docks, lockers, and working decks.\u003c\/p\u003e\u003cp\u003eIt suits boaters who want a 100 ft nylon line aboard for general anchoring, tying off, and spare line duties where softer handling matters. Before rigging it, match the 3\/16 in diameter to your cleats, chocks, fairleads, and any hardware it will run through.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3\/16 in diameter and 100 ft length for general anchor and dock line use\u003c\/li\u003e\n\u003cli\u003eSolid braided nylon that keeps a round shape and resists flattening in storage\u003c\/li\u003e\n\u003cli\u003eNylon stretch helps absorb sudden shock loads from boat movement\u003c\/li\u003e\n\u003cli\u003eMade from high-tenacity multifilament nylon fiber\u003c\/li\u003e\n\u003cli\u003eStabilized for light and heat exposure\u003c\/li\u003e\n\u003cli\u003eResists rot, oil, gasoline, grease, marine growth, and most common chemicals\u003c\/li\u003e\n\u003cli\u003eStays flexible and has a softer hand for repeated tying, coiling, and stowage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the line diameter against the hardware on board before ordering. The 3\/16 in size should match the cleats, chocks, fairleads, or other tie points the rope will pass through so it handles cleanly and knots as expected.\u003c\/p\u003e\u003cp\u003eThe full 100 ft length leaves room for custom rigging and for keeping extra line aboard as a spare. This makes it useful for boaters who want one nylon rope they can cut, stow, and put into service where needed around the boat.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550593319158,"sku":"APL048817","price":18.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713519_apl048817.jpg?v=1787796878"},{"product_id":"apl381437","title":"Attwood Marine LightArmor All-Round Pole Navigation Light, For PowerBase, LED, 2-Mile 360° Visibility","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine LightArmor All-Round Navigation Light is an LED pole light made for use with the Attwood PowerBase Light system on power-driven boats up to 39.4 ft, or 12 m. It gives 360° white visibility rated to 2 NM, or 3.7 km, which makes it a practical fit for small powerboats that need an all-round navigation light mounted high enough above the red and green sidelights.\u003c\/p\u003e\u003cp\u003eThis 5590 Series light works only with the Attwood PowerBase Light 6100-LT Series and is not a universal plug-in pole for standard fixed bases. The articulating head adjusts from 15° forward to 15° aft, helping the light sit level on installations where the PowerBase or mounting surface is not perfectly flat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLED all-round white navigation light with 360° visibility rated to 2 NM, or 3.7 km.\u003c\/li\u003e\n\u003cli\u003eFor power-driven vessels up to 39.4 ft, or 12 m, when selected and installed according to applicable navigation-light rules.\u003c\/li\u003e\n\u003cli\u003eCompatible only with the Attwood PowerBase Light 6100-LT Series.\u003c\/li\u003e\n\u003cli\u003eArticulating head adjusts from 15° forward to 15° aft for angled mounting applications.\u003c\/li\u003e\n\u003cli\u003eRated for 50,000 hours of use.\u003c\/li\u003e\n\u003cli\u003eMade to meet USCG CFR 183.810, ABYC C-5 and A-16, EN\/ISO 19009:2015, 1972 COLREGS, and US Inland Navigation Rules when installed properly.\u003c\/li\u003e\n\u003cli\u003eAvailable in 24\", 30\", 36\", and 42\" pole lengths to match vessel layout and required light height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis LightArmor PowerBase all-round light is offered in four pole lengths so the installation can be matched to the boat’s windshield, hardtop, rail layout, and sidelight height.\u003c\/p\u003e\u003cp\u003eThe pole length changes between variants. The 5590 Series all-round LED function, PowerBase compatibility, 360° coverage, and 2 NM visibility rating remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5590-24-7: 24\" pole length. This shorter pole works well where the mounting point already gives the light enough height above the sidelights without adding extra overhead reach.\u003c\/li\u003e\n\u003cli\u003e5590-30-7: 30\" pole length. This size adds clearance for many console and windshield layouts while keeping the pole moderate in height.\u003c\/li\u003e\n\u003cli\u003e5590-36-7: 36\" pole length. The taller pole helps raise the all-round light above more surrounding deck hardware, seating, or console structure.\u003c\/li\u003e\n\u003cli\u003e5590-42-7: 42\" pole length. This is the tallest configuration in the group and gives additional height where the PowerBase is mounted lower or farther from the boat’s highest sight line.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is for the Attwood PowerBase Light system only. It is not intended for other fixed, fold-down, or plug-in navigation-light bases, so the existing base on the boat should be confirmed before ordering.\u003c\/p\u003e\u003cp\u003eFor boats under 12 m, the all-round light must be positioned at least one meter above the red and green sidelights, measured at the center of the light source. The available pole lengths give installers room to match that requirement on different helm, deck, and hardtop layouts.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDuring installation, the pole wiring routes through the PowerBase breakaway opening and connects to the PowerBase wire harness with pin connectors. The pole is then inserted into the PowerBase unit and fastened after the pole and base holes are aligned.\u003c\/p\u003e\u003cp\u003eFor the all-round light setup, the light head should be adjusted so it sits parallel to the vessel’s normal resting float position. After installation, the PowerBase should be cycled between stowed and deployed positions, and the navigation light should be checked from the helm switch before the boat is used at night.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match for small powerboats that use the PowerBase powered fold-down system and need the all-round light to deploy from the helm instead of being raised or lowered by hand. It is especially useful on boats where bridges, storage covers, trailering, or low clearance make a fixed-height pole less convenient.\u003c\/p\u003e\u003ch6\u003eMaintenance and service\u003c\/h6\u003e\u003cp\u003eThe light assembly is not user serviceable and should be replaced if it is damaged, altered, or reaches 20 years from the installation date. When replacing an existing navigation light, the replacement should have at least the same pole length and rated visibility as the original installation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"36\"","offer_id":51550684512502,"sku":"APL381437-V3","price":59.99,"currency_code":"USD","in_stock":true},{"title":"42\"","offer_id":51550684545270,"sku":"APL381437-V4","price":59.99,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":51550684578038,"sku":"APL381437-V1","price":59.99,"currency_code":"USD","in_stock":true},{"title":"30\"","offer_id":51550684610806,"sku":"APL381437-V2","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327588_apl381437.webp?v=1787797943"},{"product_id":"apl943830","title":"Attwood Marine Cooler Mounting Kit, 4 Corner Brackets, 2 Elastic Cords","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 14137-7 is a cooler mounting kit that secures a portable cooler to a horizontal surface on board. It uses four corner brackets and two quick-disconnect elastic cords with hooks, so the cooler stays in place while the boat is underway and can still be removed without much hassle.\u003c\/p\u003e\u003cp\u003eThis is a straightforward way to stop a cooler from sliding across the cockpit sole or deck when the boat pounds through chop or changes direction quickly. The kit uses corrosion-proof components for marine use and installs with #8 screws, which are sold separately.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFour corner brackets hold the cooler in position on a flat mounting surface\u003c\/li\u003e\n\u003cli\u003eTwo elastic cords with hooks secure the cooler by the handles\u003c\/li\u003e\n\u003cli\u003eQuick-disconnect cord layout makes it easier to remove the cooler when needed\u003c\/li\u003e\n\u003cli\u003eCorrosion-proof construction suits wet deck and cockpit areas\u003c\/li\u003e\n\u003cli\u003eHelps limit cooler movement that can cause scuffs, shifting gear, or passenger injury\u003c\/li\u003e\n\u003cli\u003eMounts with #8 screws, letting you match fastener type to the deck material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe brackets mount to a horizontal surface, then the cooler drops into place between them and the elastic cords connect the cooler handles to the brackets. Before drilling, it is worth checking that the cooler sits flat, the footprint fits inside the bracket layout, and the handles line up cleanly with the cords.\u003c\/p\u003e\u003cp\u003eBecause the fasteners are not included, you can choose hardware that makes sense for the mounting surface and the way the boat is rigged. On fiberglass decks and molded cockpit soles, that usually means planning for proper backing or pilot holes and sealing the fastener points where needed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit makes sense for boats that carry a portable cooler in the cockpit, on deck, or near the helm where loose gear can shift underway. It is a practical match for center consoles, skiffs, bay boats, and small cruisers that use a cooler for drinks, bait, or day-trip food storage.\u003c\/p\u003e\u003cp\u003eIt also helps when the cooler needs to stay put but still come out for cleaning, loading, or dockside packing. The quick-disconnect setup keeps that part simple without turning the cooler into a permanent installation.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 corner brackets\u003c\/li\u003e\n\u003cli\u003e2 elastic cords with hooks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550688379126,"sku":"APL943830","price":15.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322333_apl943830.webp?v=1787798128"},{"product_id":"apl590391","title":"Attwood Marine SWIVL-EZE LakeSport Fixed Height Extension Post, For 238 LakeSport Seat Mounts and Socket Bases, 13 in Height, 2-3\/8 in Diameter, Hard-Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 238613L1 is a fixed-height SWIVL-EZE LakeSport extension post for Attwood 238 Series seat mounts and socket bases. It uses a 2-3\/8\" post and sets seat height at 13\", measured from the deck to the top of the seat mount.\u003c\/p\u003e\u003cp\u003eThis is the piece to match when you already have a 238 Series seating setup and want a straightforward height increase without moving to an adjustable pedestal. It is commonly used on fishing boats, pontoons, and cruising boats where a higher seat position helps with sightlines and day-to-day comfort. The 238 Series is not meant to be mixed with pedestal parts from other manufacturers, so matching the post to the correct mount and base matters for fit and latch engagement.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed 13\" extension height, measured from deck to top of seat mount\u003c\/li\u003e\n\u003cli\u003e2-3\/8\" diameter post for Attwood 238 Series LakeSport seat mounts and socket bases\u003c\/li\u003e\n\u003cli\u003eHard-anodized aluminum tube for better resistance to corrosion in wet and salty conditions\u003c\/li\u003e\n\u003cli\u003eLow-friction locking latch for smoother insertion into the base\u003c\/li\u003e\n\u003cli\u003ePush-button release that makes removal from the base easier\u003c\/li\u003e\n\u003cli\u003e238 Series hardware uses stainless steel springs\u003c\/li\u003e\n\u003cli\u003eABYC Code B classification for passenger seating positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis post is built for the Attwood 238 Series system, sometimes referred to as LakeSport. It fits 238 Series seat mounts and socket bases and is a fixed-height extension post rather than a complete pedestal kit. If you are replacing an older post, the key checkpoints are the 2-3\/8\" diameter, the 13\" installed height, and the matching 238 Series base and seat mount.\u003c\/p\u003e\u003cp\u003eThe ABYC Code B rating is useful to note when planning seat location on board. It suits passenger seating positions, so it is better matched to fishing seats and companion seating than to a helm position.\u003c\/p\u003e\u003ch6\u003eMaterials and day-to-day use\u003c\/h6\u003e\u003cp\u003eThe post tube is hard-anodized aluminum, and the 238 Series hardware uses stainless steel springs. That combination makes sense on boats where the pedestal sees spray, wet gear, repeated seat removal, and long stretches of storage between trips.\u003c\/p\u003e\u003cp\u003eThe latch shape and release button help when the seat needs to come out at the dock, during cleaning, or when converting deck space for fishing and boarding. For owners who want a seat height that stays the same every time, this fixed post keeps the setup simple.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis 13\" height is a practical middle-ground choice when the seat needs to sit higher than a low pedestal but you do not need an adjustable rise. It suits anglers, pontoon crews, and casual cruisers already running the 238 Series system who want a repeatable seating height and a clean fit with existing hardware.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550704435446,"sku":"APL590391","price":58.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713562_apl590391.jpg?v=1787798597"},{"product_id":"apl495417","title":"Attwood Marine Automatic Bilge Pump Float Switch, 12V\/24V, With Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 4201-7 is an automatic float switch with cover for 12V and 24V bilge pump systems. It adds automatic on and off control to a non-automatic electric bilge pump and is rated for loads up to 12 amps at 12V DC or 6 amps at 24V DC. The switch trips the pump at a 2 inch water level, which gives the bilge a prompt response without needing manual activation.\u003c\/p\u003e\u003cp\u003eThe covered low-profile body suits tight bilge spaces where sloshing water and loose debris can cause trouble for exposed switches. It mounts on surfaces from horizontal up to 24 degrees, uses 36 inch wire leads for installation, and includes a test knob so pump operation can be checked at the switch. The sealed switch body is mercury-free and CE rated.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConverts a manual bilge pump setup to automatic operation on 12V or 24V DC systems\u003c\/li\u003e\n\u003cli\u003eHandles pump loads up to 12 amps at 12V DC or 6 amps at 24V DC\u003c\/li\u003e\n\u003cli\u003eMechanical float switch turns the pump on at 2 inches of water\u003c\/li\u003e\n\u003cli\u003eCovered housing helps cut down cycling from bilge slosh and keeps debris away from the float\u003c\/li\u003e\n\u003cli\u003eLow-profile body mounts on surfaces from horizontal up to 24 degrees\u003c\/li\u003e\n\u003cli\u003e36 inch wire leads give extra reach for routing in the bilge\u003c\/li\u003e\n\u003cli\u003eBuilt-in test knob lets you check pump operation without lifting the float by hand\u003c\/li\u003e\n\u003cli\u003eSealed switch body resists moisture, fume ignition, and electrical shock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis switch can be mounted on its own in the bilge or fitted directly onto the rear slots of an Attwood V-Series pump bracket. That gives a cleaner install when you are pairing it with a compatible pump bracket and helps in compartments where space is limited.\u003c\/p\u003e\u003cp\u003eFor retrofit work, the current rating is the first thing to confirm before purchase. The switch needs to be matched to a pump that stays within the stated 12V or 24V load limits, and the mounting surface needs to let the float move freely without hoses, wiring, or hull structure getting in the way.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is a good match for boats using a separate bilge pump and switch arrangement rather than an integrated automatic pump. It fits many small to mid-size bilge compartments where a covered switch is preferred to help control nuisance cycling and keep debris from interfering with float movement.\u003c\/p\u003e\u003cp\u003eIt also makes sense when you want a simple mechanical switch with a local test point at the bilge. That can be useful on fishing boats, runabouts, small cruisers, and sailboats where routine pump checks are part of normal maintenance.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550708498678,"sku":"APL495417","price":44.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322272_apl495417.webp?v=1787798872"},{"product_id":"apl120011","title":"Attwood Marine Yamaha Female Fuel Hose Fitting, Acetal, Tank or Engine End","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Yamaha Hose Female Fuel Fitting is a female quick-connect hose-end fitting for Yamaha-style outboard fuel systems, used at the tank or engine end depending on the setup. This parent product covers two barb sizes, 5\/16 in and 3\/8 in, so the fitting can be matched to the inside diameter of the fuel hose already on the boat.\u003c\/p\u003e\u003cp\u003eIt is made for portable tank and outboard fuel line connections where a clean, secure hose-to-fitting transition matters, especially on small boats, tenders, fishing boats, and repower or fuel-line replacement jobs. The fitting mates with the Attwood 8897-6 Yamaha tank fitting and is suitable for leaded, unleaded, ethanol-blended, and alcohol-blended fuels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFemale Yamaha-style quick-connect fitting for fuel hose assemblies at the tank or engine end.\u003c\/li\u003e\n\u003cli\u003eAvailable with 5\/16 in or 3\/8 in barb sizes to match common marine fuel hose inside diameters.\u003c\/li\u003e\n\u003cli\u003eAcetal construction helps keep the fitting light and practical for exposed fuel-line connections on board.\u003c\/li\u003e\n\u003cli\u003eCompatible with Attwood 8897-6 Yamaha tank fitting for matching quick-connect fuel system setups.\u003c\/li\u003e\n\u003cli\u003eSuitable for leaded, unleaded, ethanol-blended, and alcohol-blended marine fuels.\u003c\/li\u003e\n\u003cli\u003eHose clamps are not included, so the installation can be completed with clamps sized for the selected hose.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fitting is offered in two hose barb configurations for matching the fuel hose size used on the boat.\u003c\/p\u003e\u003cp\u003eThe connection style and Yamaha-style female fuel fitting function are consistent across the range, while the barb size changes to suit 5\/16 in or 3\/8 in hose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e88FHY516-6: Hose size 5\/16 in barb. This size fits 5\/16 in inside-diameter fuel hose and is a common choice when replacing or building a smaller outboard fuel line assembly.\u003c\/li\u003e\n\u003cli\u003e8896LP6: Hose size 3\/8 in barb. This size fits 3\/8 in inside-diameter fuel hose and works for fuel line setups that use the larger hose size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the barb size to the fuel hose inside diameter before installation. The fitting should be secured with fuel-line clamps, and any threaded connection in the matching fuel system should be assembled with fuel-compatible thread sealant where threads are used.\u003c\/p\u003e\u003cp\u003eBefore running the engine, check the connection by priming the fuel line and inspecting for leaks at the barb, clamp area, and quick-connect interface. This is especially important after replacing old hose, changing tanks, or servicing a fuel line that has been exposed to sun, salt, or repeated removal.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis fitting is a practical replacement part for portable outboard fuel lines, spare tank setups, and routine maintenance on Yamaha-style fuel systems. It suits boaters who need to refresh a worn connector, build a new fuel hose assembly, or keep a properly sized spare fitting on board for dockside or ramp-side repairs.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"5\/16\" Barb","offer_id":51550726521078,"sku":"APL120011-V1","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3\/8\" Barb","offer_id":51550726553846,"sku":"APL120011-V2","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327436_apl120011.webp?v=1787799630"},{"product_id":"apl072199","title":"Attwood Marine Battery Tray with Straps, For Group 29\/31 Batteries, 12-7\/8 in x 7 in, Up to 10-1\/2 in Tall","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 9099-5 is a battery tray with strap for Group 29 and Group 31 batteries. Its inside dimensions are 12-7\/8 in. x 7 in., and it is sized for batteries up to 10-1\/2 in. tall, which makes it a straightforward match for larger 12V house or starting batteries that need a fixed mounting point.\u003c\/p\u003e\u003cp\u003eThis is an open tray rather than a covered battery box, so it works best where the battery already sits in a dedicated compartment, under a seat, or in another protected area on board. The strap uses a positive-locking quick-disconnect buckle, so the battery stays restrained underway but can still be removed without fighting a hard-to-reach hold-down.\u003c\/p\u003e\u003cp\u003eFor boat owners replacing a worn tray or setting up a simple battery mount, this piece keeps the installation focused on the basics: the right footprint for Group 29\/31 batteries, a molded base, and a strap system that makes routine battery service less awkward.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Group 29 and Group 31 batteries\u003c\/li\u003e\n\u003cli\u003eInside tray size of 12-7\/8 in. x 7 in. for footprint matching before installation\u003c\/li\u003e\n\u003cli\u003eAccepts batteries up to 10-1\/2 in. tall\u003c\/li\u003e\n\u003cli\u003ePolypropylene hold-down strap with a positive-locking quick-disconnect buckle\u003c\/li\u003e\n\u003cli\u003eMolded base mounts through four #10 panhead fastener points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis tray is meant for battery installations where the battery case dimensions match Group 29 or Group 31 standards. Before ordering, it is worth checking both the battery footprint and the vertical clearance above the battery, especially in compartments with low lids, nearby wiring runs, or seat bases above the tray.\u003c\/p\u003e\u003cp\u003eBecause this is a tray-and-strap setup, it suits installations where you want the battery secured to the boat structure while keeping the top of the battery accessible for cable service, charging, inspection, or replacement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe molded base mounts with four #10 panhead fastener locations, giving the tray a clear attachment pattern on a flat surface. On a boat, the best result comes from mounting it to a solid base that can handle battery weight and vibration without flexing.\u003c\/p\u003e\u003cp\u003eThe quick-disconnect buckle makes battery removal simpler during maintenance or seasonal replacement. Once the battery is seated in the tray, the strap can be tightened across the case to keep movement under control when the boat pounds through chop or sees repeated engine vibration.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis tray is a good fit for skiffs, center consoles, small cruisers, and other boats that use Group 29 or 31 batteries in an exposed compartment or battery shelf rather than inside a full battery box. It also makes sense in refit work when the goal is to replace an older tray without changing battery group size or reworking the whole compartment.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550731108598,"sku":"APL072199","price":11.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1277411_apl072199.jpg?v=1787799937"},{"product_id":"apl846449","title":"Attwood Marine Aerator Pump Nut Ring, For T800 800 GPH Pumps","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 914040 is a replacement aerator nut ring for Attwood T800 800 GPH aerator pumps. It is a small service part, but it matters when you need to keep an existing livewell or baitwell pump setup working without changing the full pump assembly.\u003c\/p\u003e\u003cp\u003eFor boats that already use the T800 aerator pump, this part is a like-for-like repair item rather than a universal substitute. It fits the kind of routine service work that comes up when the original ring is worn, cracked, or missing and you want the pump assembly back together with the correct replacement part.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement aerator nut ring for Attwood Marine part number 914040\u003c\/li\u003e\n\u003cli\u003eFits Attwood T800 800 GPH aerator pumps\u003c\/li\u003e\n\u003cli\u003eUseful for livewell and baitwell pump service when the original ring needs replacement\u003c\/li\u003e\n\u003cli\u003eDirect replacement format helps maintain the existing pump setup without moving to an improvised part\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a pump service part, not a general hardware nut or washer. The main check before ordering is the pump model already installed on the boat. When the system uses an Attwood T800 aerator pump, this is the matching nut ring for that application.\u003c\/p\u003e\u003cp\u003eThat makes it a practical match for owners, riggers, and service shops maintaining an existing baitwell or livewell system on a fishing boat. For other pump models, fit should be checked against the installed unit before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and service\u003c\/h6\u003e\u003cp\u003eReplacement is typically handled during pump service, cartridge work, or when the assembly has been taken apart for inspection. Before reassembly, it is worth checking the mating surfaces and surrounding pump components so the new ring is not being installed over damaged or misaligned parts.\u003c\/p\u003e\u003cp\u003eOn boats that see regular washdown, vibration, and repeated use of the livewell system, small replacement pieces like this can save time compared with replacing a complete pump for a minor hardware issue.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550786322678,"sku":"APL846449","price":0.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322194_apl846449.webp?v=1787801058"},{"product_id":"apl429077","title":"Attwood Marine Pressure Relief System Deck Fill, Straight Body, 1-1\/2 in Fill Hose, 5\/8 in Vent Hose","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 99DFPVSB1S is a straight-body deck fill for pressure relief fuel systems, with a scalloped black plastic cap and hose connections for 1-1\/2 inch fill hose and 5\/8 inch vent hose. It uses dual 1 psi diurnal emission control and overpressure relief valves in the cap, along with triple high-flow vacuum valves to manage tank pressure during fueling and normal fuel draw.\u003c\/p\u003e\u003cp\u003eThis fill is built for boats that need cleaner refueling behavior at the dock. The automatic nozzle shutoff works from 4 to 18 gallons per minute, which helps the system reach the proper fill level without the usual spit-back and well-back problems that can make marina fueling messy. It is also built to keep water out of the fuel system and is compatible with ethanol-blended fuels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStraight-body deck fill for pressure relief fuel systems with a scalloped black plastic cap\u003c\/li\u003e\n\u003cli\u003eFits 1-1\/2 inch fill hose and 5\/8 inch vent hose\u003c\/li\u003e\n\u003cli\u003eDual 1 psi diurnal emission control and overpressure relief valves built into the cap\u003c\/li\u003e\n\u003cli\u003eTriple high-flow vacuum valves to maintain make-up airflow in higher-demand fuel systems\u003c\/li\u003e\n\u003cli\u003eAutomatic nozzle shutoff for fueling rates from 4 to 18 gpm\u003c\/li\u003e\n\u003cli\u003eBuilt to keep water from entering the fuel system\u003c\/li\u003e\n\u003cli\u003eCompatible with ethanol-blended fuels\u003c\/li\u003e\n\u003cli\u003eHinged cap with an audible click when closed\u003c\/li\u003e\n\u003cli\u003eEPA and CARB certified, meets CARB 13 CCR 2235 and ISO 13331, and is ISO 10088 and CE compliant\u003c\/li\u003e\n\u003cli\u003eUsed as part of Attwood VaporTec and SecureStop system layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis model makes sense where the hose run below the deck works with a straight fill body rather than an angled fitting. Before ordering, confirm that the boat is set up for a pressure relief fuel system and that your existing hose sizes match the 1-1\/2 inch fill connection and 5\/8 inch vent connection.\u003c\/p\u003e\u003cp\u003eOn a retrofit, the key question is not just deck appearance, but system layout. This fill belongs in a matched pressure relief setup, so it is a better fit for boats already using compatible Attwood system components than for an older open-vent arrangement.\u003c\/p\u003e\u003ch6\u003eCompliance and system use\u003c\/h6\u003e\u003cp\u003eThis fill meets the current standards commonly checked on regulated fuel-system installs, including EPA and CARB requirements, CARB 13 CCR 2235, ISO 13331, ISO 10088, and CE compliance. That matters on boats where evaporative-emissions control, nozzle retention, and controlled tank venting are part of the fuel-system spec.\u003c\/p\u003e\u003cp\u003eIt is a practical match for center consoles, bay boats, and cruisers that refuel regularly at marina pumps and need pressure management built into the fill itself. For owners replacing a worn deck fill in a compliant pressure relief system, this part covers the details that usually decide fit: hose size, fueling rate, cap style, and standards compliance.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550818795766,"sku":"APL429077","price":104.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713763_apl429077.jpg?v=1787801884"},{"product_id":"apl144054","title":"Attwood Marine Tsunami Mk2 T500 Livewell Aerator Pump, 12V, 500 GPH","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Tsunami Mk2 T500 is a 12 V livewell aerator pump for keeping bait and catch supplied with fresh, moving water on fishing boats, skiffs, bay boats, and other small craft with livewell or baitwell plumbing. It sits in the 500 GPH class, with T500 pump data showing 507 GPH at 0 ft head under 13.6 V test conditions, a 3 A fuse rating, and a 3\/4 in. barb outlet.\u003c\/p\u003e\u003cp\u003eThis parent product covers the T500 inlet configurations used to match different hull, seacock, and plumbing layouts. The Mk2 cartridge is serviceable with one hand, the outlet can rotate 360 degrees, and the pump supports installation with straight or 90-degree outlet routing where hose direction matters inside a tight bilge, transom, or livewell compartment.\u003c\/p\u003e\u003cp\u003eThe pump body is IP68 rated and built around materials selected for wet marine spaces, including a PC\/PBT body and lid, nitrile seals, and an SS316 motor shaft. It is also listed against marine ignition protection and electrical wiring standards, which is important when the pump is mounted low in the boat near fuel systems, batteries, and other onboard electrical equipment.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 V T500 aerator pump for livewell and baitwell water circulation.\u003c\/li\u003e\n\u003cli\u003e500 GPH class output, with 507 GPH at 0 ft head and 319 GPH at 3.3 ft head under 13.6 V test conditions.\u003c\/li\u003e\n\u003cli\u003e3 A fuse rating and 3\/4 in. barb outlet for common livewell hose layouts.\u003c\/li\u003e\n\u003cli\u003eIP68 rated pump housing for wet bilge, transom, and livewell areas.\u003c\/li\u003e\n\u003cli\u003e360-degree outlet rotation helps line up hose runs without forcing the pump body into an awkward position.\u003c\/li\u003e\n\u003cli\u003eOne-handed serviceable motor cartridge helps make cleaning or replacement easier after regular baitwell use.\u003c\/li\u003e\n\u003cli\u003eMk2 cartridges are compatible with previous Tsunami models, which helps when refreshing an older Attwood livewell setup.\u003c\/li\u003e\n\u003cli\u003eMeets ISO 8846 Marine ignition protection and ABYC E-11 and ISO 10133 marine electrical wiring standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Tsunami Mk2 T500 range is offered with different inlet styles so the same pump family can suit several livewell plumbing arrangements.\u003c\/p\u003e\u003cp\u003eThe inlet configuration changes between variants. The core T500 specifications remain consistent across the 564X versions, including 12 V operation, the 3 A fuse rating, the 3\/4 in. barb outlet, the 1-1\/8 in. hole saw size, and the 500 GPH class pump output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5640-4 - Straight inlet. This configuration uses a 3.5 in. long straight inlet with 3\/4 NPS threading, which suits straight thru-hull runs where the pump can sit in line with the fitting.\u003c\/li\u003e\n\u003cli\u003e5643-4 - 3\/4 in. NPT inlet. This seacock version uses a 3\/4 in. NPT inlet with a short 0.85 in. inlet length, which helps when the pump connects to a seacock-style fitting.\u003c\/li\u003e\n\u003cli\u003e5644-4 - 90-degree inlet. This angled inlet helps route the pump where a straight approach would crowd hoses, bulkheads, or livewell plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMatch the inlet style to the existing hull fitting or seacock before ordering. The straight inlet version works well when there is room for a direct pump orientation, while the 90-degree inlet helps when the hose path needs to turn quickly after the inlet. The 3\/4 in. NPT version is the configuration to consider where the installation is built around a compatible seacock connection.\u003c\/p\u003e\u003cp\u003eThe 360-degree outlet gives the installer more freedom to point the discharge hose without reworking the whole pump location. That matters in real boats, where livewell plumbing often shares space with steering lines, batteries, transom brackets, and wiring.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a 12 V DC pump and should be wired with proper circuit protection using the specified 3 A fuse. As with any livewell pump, wiring should be kept above standing water where possible, supported against vibration, and protected from chafe near the transom, bilge, or livewell wall.\u003c\/p\u003e\u003cp\u003eThe pump is not a networked marine electronics device and does not connect to NMEA 2000 or NMEA 0183 systems. It is a straightforward livewell pump intended for switched 12 V operation as part of the boat’s plumbing and electrical system.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis pump is a good match for anglers replacing or upgrading a 12 V Attwood Tsunami livewell aerator, especially where service access and inlet orientation matter. It fits common baitwell and livewell use on fishing boats that need dependable water movement during short runs, long days at anchor, or tournament-style catch care.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Straight Inlet","offer_id":51550856020214,"sku":"APL144054-V6","price":48.89,"currency_code":"USD","in_stock":true},{"title":"90-Degree Inlet","offer_id":51550856052982,"sku":"APL144054-V3","price":53.14,"currency_code":"USD","in_stock":true},{"title":"3\/4\" NPT Inlet","offer_id":51550856085750,"sku":"APL144054-V8","price":48.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325751_apl144054.webp?v=1787802832"},{"product_id":"apl912574","title":"Attwood Marine Light Armor Surface-Mount Underwater LED Light, 12 LEDs, 12\/24V DC, 6 in, Sapphire Blue Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 65UW12B-7 is a surface-mount underwater LED light with 12 sapphire blue LEDs for 12V and 24V DC systems. It is the 6 inch High Performance version in the LightArmor range, with 1,650 lumens of output and current draw of 1.32A at 13.6V or 0.66A at 24V.\u003c\/p\u003e\u003cp\u003eThis light mounts below the waterline and only works underwater. Its low profile helps keep the fixture close to the transom, which matters on boats where space is tight around ladders, tabs, or swim platforms. The aftermarket packaged version includes an electro-polished 316 stainless steel cover.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 sapphire blue LEDs in a 6 inch surface-mount housing\u003c\/li\u003e\n\u003cli\u003e1,650 lumens of output\u003c\/li\u003e\n\u003cli\u003eWorks on both 12V and 24V DC boat systems\u003c\/li\u003e\n\u003cli\u003eCurrent draw of 1.32A at 13.6V and 0.66A at 24V\u003c\/li\u003e\n\u003cli\u003eHeat-Sync cooling system with active overheat protection\u003c\/li\u003e\n\u003cli\u003eElectronics are fully sealed and waterproof, with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eLens resists impact, and the housing resists corrosion, chemicals, and UV exposure\u003c\/li\u003e\n\u003cli\u003e3 ft sheathed wire lead for transom wiring runs\u003c\/li\u003e\n\u003cli\u003eElectro-polished 316 stainless steel cover included with aftermarket packaging\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the transom layout before drilling. This 6.0 HP model measures 6.00 inches long and 2.35 inches wide, with 5.25 inches between mounting holes. The required wiring hole diameter is 0.56 inches. Installed height is 0.56 inches, and wire collar depth is 0.30 inches.\u003c\/p\u003e\u003cp\u003eThe supplied 3 ft sheathed wire suits short runs from the mounting point to a nearby power connection. For a clean installation, mount it on a solid section of transom below the waterline with enough room for the cable entry, fasteners, and sealing around the wiring hole.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis light fits straightforward DC lighting circuits where you are bringing switched power to the stern. The dual-voltage design makes it useful on smaller 12V boats and on larger 24V systems without changing the fixture. Reverse polarity protection adds a layer of protection during hookup, but proper circuit protection and marine sealing still matter at the install point.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners who want blue underwater lighting at the stern without stepping up to a larger housing. It suits center consoles, cruisers, towboats, and other transom-mounted applications where a low fixture height and predictable current draw are important when planning the install.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550872568054,"sku":"APL912574","price":404.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698479_apl912574_jpeg.jpg?v=1787803153"},{"product_id":"apl488388","title":"Attwood Marine All-Plastic Adjustable Battery Tray, Adjustable-Height Crossbar, ABYC E-10","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine Heavy-Duty All-Plastic Adjustable Battery Tray is a battery hold-down tray range for securing Group 24 and Group 27 marine batteries in boats, trailers, and vibration-prone battery compartments. Standard-profile versions adjust from 7 to 9.5 inches tall for batteries with more case height, while low-profile versions list an 8-1\/2 in inside height for tighter mounting areas.\u003c\/p\u003e\u003cp\u003eThe tray body is made from non-corrosive black plastic and uses an adjustable-height crossbar with two retaining bolts instead of a webbing strap. The range meets ABYC Standard E-10 and U.S. Coast Guard requirements, making it a practical replacement for worn battery trays in consoles, transom lockers, under-seat spaces, and engine-room battery areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConfigurations cover Group 24\/24M and Group 27\/27M batteries, with 24F and 27F coverage on the standard-profile trays.\u003c\/li\u003e\n\u003cli\u003eStandard-profile trays adjust from 7 to 9.5 inches tall and use inside footprints of 10-5\/8 in x 6-3\/4 in for Group 24 or 12-1\/8 in x 6-3\/4 in for Group 27.\u003c\/li\u003e\n\u003cli\u003eLow-profile trays use an 8-1\/2 in listed height with a 7-1\/4 in tray width for Group 24\/24M or Group 27\/27M batteries.\u003c\/li\u003e\n\u003cli\u003eNon-corrosive black plastic tray body helps avoid rust issues in damp lockers, bilges, and transom battery areas.\u003c\/li\u003e\n\u003cli\u003eAdjustable-height crossbar and two retaining bolts hold the battery down without a webbing strap.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC Standard E-10 and U.S. Coast Guard battery hold-down requirements; installs with #10 fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range is offered by battery group size and profile height. Group 24 versions use the shorter tray footprint, Group 27 versions use the longer tray footprint, and the profile selection changes the tray height and battery clearance.\u003c\/p\u003e\u003cp\u003eThe standard-profile versions cover taller battery setups with a crossbar that adjusts from 7 to 9.5 inches. The low-profile versions use the 8-1\/2 in listed height and are used for Group 24\/24M or Group 27\/27M batteries where the lower tray style fits the installation space.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e9097-5: Battery group size Group 24 \/ 24M, standard profile. This version uses the standard-profile tray with a 10-5\/8 in x 6-3\/4 in inside footprint and height adjustment from 7 to 9.5 inches.\u003c\/li\u003e\n\u003cli\u003e9098-5: Battery group size Group 27 \/ 27M \/ 27F, standard profile. This version uses the longer standard-profile tray with a 12-1\/8 in x 6-3\/4 in inside footprint and the same 7 to 9.5 in height adjustment.\u003c\/li\u003e\n\u003cli\u003e9090-5: Battery group size Group 24 \/ 24M, low profile. This version uses a 10-5\/8 in x 7-1\/4 in x 8-1\/2 in inside dimension for installations with less vertical room around the battery.\u003c\/li\u003e\n\u003cli\u003e9091-5: Battery group size Group 27 \/ 27M, low profile. This version uses a 12-5\/8 in x 7-1\/4 in x 8-1\/2 in inside dimension for larger Group 27 batteries in the low-profile tray style.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMount the tray to a flat, solid surface with #10 fasteners through the tray mounting holes. Before drilling, check clearance above the battery for terminals, cable bends, battery covers, and the crossbar nuts, especially in compact consoles, under-seat compartments, and transom lockers.\u003c\/p\u003e\u003cp\u003eMatch the tray to the battery group size and verify the actual battery case dimensions before installation, since battery cases and terminal layouts can vary by brand. Route battery cables so the hold-down does not press on terminals, cable lugs, or protective boots.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis tray range suits small boats, fishing boats, pontoons, and cruisers where the starting or house battery needs a secure hold-down that can handle movement underway. The all-plastic tray body is useful in saltwater and freshwater areas where damp air, washdown water, and battery compartment moisture are common.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBattery tray\u003c\/li\u003e\n\u003cli\u003eAdjustable-height crossbar\u003c\/li\u003e\n\u003cli\u003eTwo retaining bolts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Standard Profile \/ Group 27 \/ 27M \/ 27F","offer_id":51550902943990,"sku":"APL488388-V8","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Low Profile \/ Group 27 \/ 27M","offer_id":51550902976758,"sku":"APL488388-V10","price":12.99,"currency_code":"USD","in_stock":true},{"title":"Low Profile \/ Group 24 \/ 24M","offer_id":51550903009526,"sku":"APL488388-V9","price":11.99,"currency_code":"USD","in_stock":true},{"title":"Standard Profile \/ Group 24 \/ 24M","offer_id":51550903042294,"sku":"APL488388-V5","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327397_apl488388.jpg?v=1787804003"},{"product_id":"apl436073","title":"Attwood Marine Round Interior\/Exterior Light, 2.75 in, 12V, White Bezel, Blue LED","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 6323W7 is a 2.75 inch round LED courtesy light with a white plastic bezel, blue output, 12 VDC operation, and a 1.8 W draw. It is built for interior or exterior mounting, with fully potted electronics, a stainless steel housing, and a rated service life of 50,000+ hours.\u003c\/p\u003e\u003cp\u003eThis light fits the kind of onboard spots where you want low-level illumination without the heat and power draw of older halogen fixtures. Blue output works well around cockpit seating, helm footwells, cabin entry points, companionway steps, and other walk-through areas where night visibility matters but harsh white light is not wanted.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2.75 inch round courtesy light for interior or exterior mounting\u003c\/li\u003e\n\u003cli\u003eBlue LED output with a white plastic bezel for a clean finished look\u003c\/li\u003e\n\u003cli\u003e12 VDC light with a 1.8 W draw for low current demand on house lighting circuits\u003c\/li\u003e\n\u003cli\u003eFully potted electronics and stainless steel housing for use in exposed marine locations\u003c\/li\u003e\n\u003cli\u003eRuns cooler than comparable halogen lights and helps reduce burn risk in tight spaces\u003c\/li\u003e\n\u003cli\u003eRated for 50,000+ hours of service life\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis model is a straightforward match for boats already using a 12-volt courtesy lighting circuit. The round format suits common retrofit and new-install positions in cabins, cockpits, under-gunwale areas, and deck transitions where a compact light is easier to place.\u003c\/p\u003e\u003cp\u003eBecause it is intended for interior and exterior mounting, it makes sense in areas that may see spray, washdowns, or constant vibration. Before ordering, confirm that your boat uses 12 VDC for this circuit and check the mounting location for the right face size, depth, and wire access.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a practical fit for owners replacing older halogen courtesy lights and looking for lower heat and lower power draw without giving up useful output. It also suits new builds and refits where blue courtesy lighting is being added for step lighting, accent lighting, or safer movement through the boat after dark.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550915690742,"sku":"APL436073","price":38.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1106039_apl436073jpg.jpg?v=1787804377"},{"product_id":"apl262279","title":"Attwood Marine Lock'N-Pin Seat Mount, 3\/4 in Pin, 3° Tilt","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Lock'N-Pin 3\/4-inch Pin Seat Mount is a seat-to-pedestal mount for Attwood 3\/4-inch pin seating systems, with Lock'N-Pin retention that helps keep the seat mount, post, and base from separating unintentionally. The mount uses a 2-3\/4-inch pin and a 3-degree tilt, and the range includes 1-inch and 2-inch installed height options depending on the finish and spring configuration.\u003c\/p\u003e\u003cp\u003eThese mounts are made for matching Attwood Lock'N-Pin components on fishing seats, passenger seats, and general cockpit or deck seating positions. They are ABYC Code B seating hardware, so they should not be used for a helm or driver seat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3\/4-inch Lock'N-Pin seating interface for compatible Attwood posts and bases.\u003c\/li\u003e\n\u003cli\u003eLocking pin system helps prevent unintended separation of the seat mount, post, and base.\u003c\/li\u003e\n\u003cli\u003e2-3\/4-inch pin length with a 3-degree tilt for the seat angle built into the mount.\u003c\/li\u003e\n\u003cli\u003eABYC Code B seating hardware for non-helm seating positions.\u003c\/li\u003e\n\u003cli\u003eFinish and material options include zinc-plated steel, black E-coated steel, and all stainless steel.\u003c\/li\u003e\n\u003cli\u003e1-inch and 2-inch installed height options help match the replacement mount to the existing seat setup.\u003c\/li\u003e\n\u003cli\u003eSpring and non-spring configurations are available, so the mount can match the feel and height of the original installation.\u003c\/li\u003e\n\u003cli\u003eIntended for use within the Attwood Lock'N-Pin system rather than mixed with other manufacturers' pedestal hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Lock'N-Pin seat mount is offered in four configurations, with the main differences being finish, pin material, spring style, and installed height.\u003c\/p\u003e\u003cp\u003eThe 3\/4-inch seating interface, 2-3\/4-inch pin format, and 3-degree tilt stay consistent across these configurations. The 2-inch versions include a spring, while the 1-inch versions keep the seat lower and omit the spring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSP-1002: Zinc-plated finish, 2-3\/4-inch steel pin with spring, 2-inch installed height. The spring adds a little give under the seat, and the zinc-plated finish matches a common silver-toned replacement setup.\u003c\/li\u003e\n\u003cli\u003e1002: Black E-coated finish, 2-3\/4-inch steel pin with spring, 2-inch installed height. This version keeps the spring and uses a black finish that blends under many boat seats and pedestal arrangements.\u003c\/li\u003e\n\u003cli\u003e1002-S: Black E-coated finish, 2-3\/4-inch steel pin, 1-inch installed height. This non-spring configuration keeps the seat lower than the spring versions where extra cushion travel is not wanted.\u003c\/li\u003e\n\u003cli\u003e1002-SS: All stainless steel finish, 2-3\/4-inch stainless steel pin, 1-inch installed height. The all-stainless build is a strong match for seating locations that see more moisture, spray, or washdowns.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this mount with Attwood 3\/4-inch Lock'N-Pin posts and bases from the same system. Before replacing an existing mount, compare the installed height, spring style, finish, pin material, and whether the seating position is a non-helm location.\u003c\/p\u003e\u003cp\u003eFor a helm chair or driver position, use seating hardware rated for that position by the boat builder or pedestal system requirements. This series is a good match for anglers and recreational boaters replacing a worn Lock'N-Pin seat mount in a fishing, passenger, or general utility seating location.\u003c\/p\u003e\u003ch6\u003eInstallation notes\u003c\/h6\u003e\u003cp\u003eThis mount is part of a drop-in pedestal seating system, so fit depends on the matching post and base as much as the seat mount itself. Keep the seating hardware within the same Lock'N-Pin family, check that the pin locks cleanly into the mating component, and confirm that the finished seat height feels right before regular use on the water.\u003c\/p\u003e\u003ch6\u003eMaterials and finish\u003c\/h6\u003e\u003cp\u003eThe zinc-plated and black E-coated steel versions make sense when replacing similar steel hardware and keeping the finish close to the original look under the seat. The all stainless steel version keeps the same basic seating geometry but uses stainless steel throughout, including the pin, for added corrosion resistance in wet marine areas.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"2-3\/4\" Steel Pin With Spring \/ 2\" \/ Black E-Coated","offer_id":51550926012662,"sku":"APL262279-V2","price":25.41,"currency_code":"USD","in_stock":false},{"title":"2-3\/4\" Stainless Steel Pin \/ 1\" \/ All Stainless Steel","offer_id":51550926045430,"sku":"APL262279-V4","price":67.4,"currency_code":"USD","in_stock":true},{"title":"2-3\/4\" Steel Pin \/ 1\" \/ Black E-Coated","offer_id":51550926078198,"sku":"APL262279-V3","price":30.21,"currency_code":"USD","in_stock":false},{"title":"2-3\/4\" Steel Pin With Spring \/ 2\" \/ Zinc-Plated","offer_id":51550926110966,"sku":"APL262279-V1","price":25.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327524_apl262279.jpg?v=1787804692"},{"product_id":"apl265160","title":"Attwood Marine Anchor Ring \u0026 Rope, Up to 80 lb, For 10 ft+ Chain","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 9351-2 is an anchor retrieval ring and rope setup for buoy-assisted anchor recovery on boats using 10 feet or more of anchor chain. It is intended for anchor systems up to 80 lb, and the actual lift capacity depends on the buoy size used in the system.\u003c\/p\u003e\u003cp\u003eThe ring attaches at the anchor end, while a buoy attaches to the other end of the rope and floats above the anchor during retrieval. That layout helps mark the anchor position and gives you a more manageable way to bring the anchor and chain back up, especially when the weight of the ground tackle starts to add up at the bow.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for boaters who recover their anchor by hand and want a simpler routine when working with chain. The buoy is sold separately, so the setup can be matched to the anchor system already on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for anchor systems up to 80 lb\u003c\/li\u003e\n\u003cli\u003eMade for setups using 10 feet or more of anchor chain\u003c\/li\u003e\n\u003cli\u003eRing-and-rope arrangement works with a separate buoy for anchor retrieval\u003c\/li\u003e\n\u003cli\u003eBuoy floats above the anchor to help show anchor location during recovery\u003c\/li\u003e\n\u003cli\u003eLift performance depends on the buoy size chosen for the system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis setup makes sense where a boat already uses enough chain for a buoy-assisted retrieval method to work as intended. The main fit points are the total anchor system weight, the amount of chain in use, and the buoy size selected for the job.\u003c\/p\u003e\u003cp\u003eIt suits common recreational anchoring setups where the goal is to recover anchor and chain with less strain at the bow. Because the buoy is not included, it is worth matching the buoy capacity to the weight of the anchor system rather than looking at the ring and rope on their own.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn boats that anchor often for fishing, sandbar stops, or day cruising, this type of retrieval aid helps keep anchor recovery more controlled when the anchor is being brought up by hand. It is especially useful when chain weight is part of the system, since that extra weight is what usually makes the last part of retrieval harder.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550951571702,"sku":"APL265160","price":18.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322363_apl265160.webp?v=1787805435"},{"product_id":"apl541632","title":"Attwood Marine Boat Trailer Winch, 2 in x 20 ft Nylon Strap, 4.1:1 Gear Ratio, 3-Position Pawl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine trailer winch is a manual boat trailer winch range for loading and retrieving trailerable boats with a 2 in x 20 ft nylon web strap. The range covers two drive and capacity options: a 1200lb single-driver version and a 2000lb dual-drive version, each with a 4.1:1 gear ratio.\u003c\/p\u003e\u003cp\u003eThese winches are built for boat trailer use where simple hand operation, controlled movement, and a secure strap connection matter at the ramp. A three-position pawl supports forward, neutral, and reverse operation, while the included zinc-plated snap hook connects the strap to the boat during launch and retrieval.\u003c\/p\u003e\u003cp\u003eBecause this is a manual winch, it does not require 12V or 24V wiring, switches, batteries, or marine network integration. Fit should be checked against the trailer winch stand, mounting pattern, boat weight, and the working load needed for the launch conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual boat trailer winch range with 1200lb and 2000lb rated capacity options.\u003c\/li\u003e\n\u003cli\u003e2 in x 20 ft nylon web strap included for boat trailer launch and retrieval work.\u003c\/li\u003e\n\u003cli\u003e4.1:1 gear ratio gives controlled hand-crank operation at the ramp.\u003c\/li\u003e\n\u003cli\u003eThree-position pawl supports forward, neutral, and reverse operation.\u003c\/li\u003e\n\u003cli\u003eZinc-plated snap hook provides a direct strap connection to the boat's bow eye.\u003c\/li\u003e\n\u003cli\u003eBlack EDC finish helps the winch stand up to normal trailer exposure.\u003c\/li\u003e\n\u003cli\u003eMolded textured roller grip gives the handle a more secure feel when cranking with wet hands.\u003c\/li\u003e\n\u003cli\u003eDual-drive 2000lb version distributes load across two gear sets to reduce frame torque.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine trailer winch range is offered in two configurations for different trailer loads and drive preferences.\u003c\/p\u003e\u003cp\u003eThe variants differ by drive type and rated capacity. Both configurations use a 2 in x 20 ft nylon web strap, 4.1:1 gear ratio, three-position pawl, black EDC finish, molded textured roller grip, and zinc-plated snap hook.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e11149-4: Single Driver Winch with 1200lb capacity. This version keeps the setup straightforward for lighter trailerable boats where the winch rating matches the boat, trailer, and ramp conditions.\u003c\/li\u003e\n\u003cli\u003e11195-4: Dual Drive Winch with 2000lb capacity. This version uses a dual-drive layout that spreads the load across two gear sets, which helps reduce frame torque during heavier pulls.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eMount the winch on a trailer winch post or stand that matches the winch base and load requirement. The strap should pull in a straight line toward the bow eye whenever possible, with the winch positioned so the strap does not rub against the trailer frame, bow stop, or roller hardware during retrieval.\u003c\/p\u003e\u003cp\u003eBefore use, confirm that the selected capacity is appropriate for the boat, trailer setup, ramp angle, and launch conditions. The winch is for controlled trailer loading and positioning, not for lifting the boat or replacing proper tie-down straps during transport.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the winch, strap, hook, and surrounding trailer hardware with fresh water and let the strap dry before long storage. Check the strap for cuts, abrasion, UV wear, or stitching damage, and inspect the hook and pawl action before each launch or retrieval.\u003c\/p\u003e\u003cp\u003eThis winch range is a practical match for boat owners who want a hand-operated trailer winch with a strap rather than cable, especially for small to midsize trailerable boats used for fishing, day cruising, or regular ramp launching.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual trailer winch\u003c\/li\u003e\n\u003cli\u003e2 in x 20 ft nylon web strap\u003c\/li\u003e\n\u003cli\u003eZinc-plated snap hook\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"1200lb \/ Single Driver Winch","offer_id":51550952685814,"sku":"APL541632-V6","price":51.57,"currency_code":"USD","in_stock":true},{"title":"2000lb \/ Dual Drive Winch","offer_id":51550952718582,"sku":"APL541632-V5","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0716001_apl541632.jpg?v=1787805462"},{"product_id":"apl663915","title":"Attwood Marine SWIVL-EZE Lock'N-Pin Threaded Deck Base, 3\/4 in Pin, 7 x 7 in, Zinc-Plated Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine SP-67739-T is a 7\" x 7\" zinc-plated steel pedestal base plate for SWIVL-EZE Lock'N-Pin 3\/4\" threaded seat pedestals. It mounts flush to the deck and gives you a fixed base for a seat setup that needs a threaded 3\/4\" Lock'N-Pin connection rather than a simple drop-in post.\u003c\/p\u003e\u003cp\u003eThis is the kind of base used when you are replacing a worn deck plate or adding another seating position on a pontoon, fishing boat, or cruising boat. The square 7\" x 7\" footprint spreads load across the mounting area, and the six-hole deck attachment pattern gives you a straightforward way to bolt or screw it down to a properly reinforced surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits SWIVL-EZE Lock'N-Pin 3\/4\" threaded pedestal systems\u003c\/li\u003e\n\u003cli\u003e7\" x 7\" square base plate for a broad deck footprint\u003c\/li\u003e\n\u003cli\u003eZinc-plated steel construction\u003c\/li\u003e\n\u003cli\u003eFlush-mount deck plate with six attachment points\u003c\/li\u003e\n\u003cli\u003eThreaded base connection adds a more secure seat-to-base engagement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis base is for seat systems built around the Attwood SWIVL-EZE Lock'N-Pin 3\/4\" threaded standard. Before ordering, match the pedestal style and thread type in your current setup, not just the outside post size. That matters most on replacement jobs where the seat, pedestal, and deck plate may have come from different generations or brands.\u003c\/p\u003e\u003cp\u003eThe 7\" x 7\" footprint works well where you have enough flat deck area to support the plate and the fasteners below it. On smaller casting decks, storage lids, or thin fiberglass sections, check clearance underneath and make sure the mounting surface can take the load of the seat and passenger in rough water.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward once the mounting position is set. The plate fastens through six holes, so it is worth taking time to line it up with the seat position, helm access, and under-deck structure before drilling. A solid backing surface is important on boats that see chop, repeated seat movement, or heavier occupants.\u003c\/p\u003e\u003cp\u003eFor refits, this base makes sense when the rest of the seating hardware is still built around the 3\/4\" Lock'N-Pin threaded format and you want to keep the system consistent. It is also a practical choice when adding a second seat location for fishing, cruising, or extra passenger seating without changing the rest of the pedestal hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis base suits owners who need a simple deck plate for a compatible pedestal seat on pontoons, center consoles, and small cruising boats. It is especially useful where the priority is a known 3\/4\" Lock'N-Pin fit and a deck plate that can be mounted cleanly without moving to a different seat system.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550963073270,"sku":"APL663915","price":66.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713545_apl663915.jpg?v=1787805705"},{"product_id":"apl302151","title":"Attwood Marine 278 ProGlide Seat Mount with Slider, For 2-7\/8 in Posts, Long Handle","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 278 ProGlide Slider is a boat seat mount with an integrated slide, built for helm and cockpit seating that needs fore and aft adjustment on a 2-7\/8 in pedestal post.\u003c\/p\u003e\u003cp\u003eThis 278 ProGlide setup gives the seat a wider support interface and a smoother adjustment path, which matters when the seat is used at the helm, on a fishing deck, or in a pontoon seating position where the operator may need to move closer to the wheel, controls, or console. The long handle folds out of the way when it is not being used, helping keep the seating area clear.\u003c\/p\u003e\u003cp\u003eThe range includes 0 degree and 3 degree mount angle versions, so the mount can be matched to the seating position and the way the seat needs to sit on the pedestal. Before installation, confirm the existing post diameter, seat mounting pattern, and under-seat clearance on the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIntegrated seat mount and slider for fore and aft seat adjustment at the helm, cockpit, or fishing station.\u003c\/li\u003e\n\u003cli\u003eFits 2-7\/8 in diameter pedestal posts used in compatible Attwood Swivl-Eze 278 seating systems.\u003c\/li\u003e\n\u003cli\u003eAvailable in 0 degree and 3 degree mount angle versions to match the seating layout.\u003c\/li\u003e\n\u003cli\u003eWider seat interface helps support larger helm seats and keeps the seat connection stable during normal boat motion.\u003c\/li\u003e\n\u003cli\u003eLong release handle folds away when not in use, reducing interference under the seat.\u003c\/li\u003e\n\u003cli\u003eUseful for replacing an existing 278 ProGlide slider or setting up a new marine seat installation where slide adjustment is required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that share the same 278 ProGlide slider purpose but differ by mount angle.\u003c\/p\u003e\u003cp\u003eThe key difference is the seat mount angle. Both variants are intended for 2-7\/8 in pedestal post applications, but the selected angle should match the existing seating geometry and the way the seat is meant to sit on the boat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e278AOZPGL-1, Mount angle 0 degree. This version keeps the seat mount level, making it a straightforward match for installations where the current seat position does not require tilt correction.\u003c\/li\u003e\n\u003cli\u003e278AO3PGL-1, Mount angle 3 degree. This version adds a 3 degree mount angle, which can help match seating setups where the seat base needs a slight tilt relative to the pedestal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck that the boat uses a compatible 2-7\/8 in pedestal post before ordering. The slider sits between the seat and pedestal system, so it is also important to confirm the bolt pattern on the seat bottom and the available space under the cushion for the slide mechanism and handle movement.\u003c\/p\u003e\u003cp\u003eFor replacement work, compare the mount angle on the existing part before changing configurations. A 0 degree mount and a 3 degree mount can change the way the seat feels at the helm, especially on consoles where sightline, throttle reach, and steering position are already set.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis slider is a good match for boats where the helm or cockpit seat needs practical adjustment rather than fixed positioning. It suits operators who move between seated driving, standing at the console, docking, and fishing tasks where seat position changes through the day.\u003c\/p\u003e\u003cp\u003eAfter installation, periodically check the mounting hardware and slide action as part of normal seat maintenance, especially on boats exposed to vibration, washdowns, and saltwater air.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"3 Degree","offer_id":51551000592630,"sku":"APL302151-V2","price":223.84,"currency_code":"USD","in_stock":false},{"title":"0 Degree","offer_id":51551000625398,"sku":"APL302151-V1","price":209.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327557_apl302151.webp?v=1787806263"},{"product_id":"apl976710","title":"Attwood Marine Outboard Fuel Filter, 3\/8 in Lines, 40 Micron, Clear Body","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 12562-6 is an inline fuel filter for carbureted outboard engines that uses 40-micron filtration and fits 3\/8 inch fuel lines. It is a disposable high-flow filter with a clear housing, so you can inspect it in place without opening the fuel line every time you check the system.\u003c\/p\u003e\u003cp\u003eThis style of filter suits boats that run a simple inline outboard fuel feed rather than a larger spin-on canister setup. It helps catch debris before it reaches the carburetor and gives you a straightforward service point in the hose run between the tank and engine.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e40-micron filtration for carbureted outboard fuel systems\u003c\/li\u003e\n\u003cli\u003eFits 3\/8 inch fuel lines used on many outboard installations\u003c\/li\u003e\n\u003cli\u003eClear housing lets you inspect the filter without opening the line\u003c\/li\u003e\n\u003cli\u003eHigh-flow inline format that works with most outboard motors\u003c\/li\u003e\n\u003cli\u003eHousing resists impact and is shatter-resistant\u003c\/li\u003e\n\u003cli\u003eDisposable design keeps seasonal filter changes simple\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck your hose size before ordering, since this filter is sized for 3\/8 inch fuel line. It is best matched to carbureted outboard fuel systems where an inline service filter is already part of the hose run or where you are replacing the same style of filter.\u003c\/p\u003e\u003cp\u003eFor buyers comparing fuel filtration layouts, this unit is the compact inline type, not a remote spin-on water-separating assembly. It makes sense where space is limited and where quick visual inspection matters during routine checks at the dock or before a long day on the water.\u003c\/p\u003e\u003ch6\u003eInstallation and service\u003c\/h6\u003e\u003cp\u003eMount it in an accessible section of the fuel hose where the body can be seen and replaced without fighting other rigging. Keeping it visible makes it easier to spot contamination buildup during normal maintenance.\u003c\/p\u003e\u003cp\u003eThis filter is a good match for boaters who handle their own seasonal service on carbureted outboards. Replacing it during winter layup or spring commissioning keeps the fuel line fresh and gives you a clean starting point for the season.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551001247990,"sku":"APL976710","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322606_apl976710.jpg?v=1787806285"},{"product_id":"apl296845","title":"Attwood Marine Scupper Valve, For 3875B Thru-Transom Connector, For 3881 Thru-Transom Scupper, 2-7\/8 in, Acetal","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 3876-3 is a scupper valve for boats with self-bailing cockpits. It uses an acetal body, measures 2-7\/8 inches in diameter, and fits the Attwood 3875B thru-transom thru-hull connector.\u003c\/p\u003e\u003cp\u003eIt replaces the valve used with the 3881 thru-transom scupper and is intended for above-the-waterline installation only. In use, the flapper opens to let cockpit water drain overboard and closes back to help reduce water coming in through the outlet.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-7\/8 inch scupper valve sized for self-bailing cockpit drains\u003c\/li\u003e\n\u003cli\u003eFits the Attwood 3875B thru-transom thru-hull connector\u003c\/li\u003e\n\u003cli\u003eReplacement valve for the Attwood 3881 thru-transom scupper\u003c\/li\u003e\n\u003cli\u003eAcetal construction\u003c\/li\u003e\n\u003cli\u003eFlapper-style valve that opens for drainage and closes back at the outlet\u003c\/li\u003e\n\u003cli\u003eScrew holes are drilled during installation\u003c\/li\u003e\n\u003cli\u003eFor above-the-waterline installation only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis valve is for transom drain setups built around the 3875B connector or older 3881 scupper assemblies. It is a direct match when the existing drain uses the same 2-7\/8 inch Attwood valve format.\u003c\/p\u003e\u003cp\u003eIt is a sensible replacement when the original scupper valve has become worn, no longer swings freely, or no longer closes cleanly at the cockpit drain outlet.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation requires drilling the screw holes for the valve. Because this part is used above the waterline, it belongs on self-bailing cockpit drains and similar transom drainage points, not on below-the-waterline thru-hull openings.\u003c\/p\u003e\u003cp\u003eThis suits boats that rely on gravity drainage from the cockpit, including many center consoles, fishing boats, and other layouts with self-bailing deck areas.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551005704438,"sku":"APL296845","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713521_apl296845.jpg?v=1787806410"},{"product_id":"apl275755","title":"Attwood Marine Anchor Line with Snap Hook, 1\/4 in x 50 ft, Hollow Braid Polypropylene, White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11714-2 is a 1\/4 inch x 50 foot hollow-braid polypropylene anchor line with a snap hook. It is a floating white line that is easy to keep in sight when you are setting, retrieving, or sorting anchor gear on deck.\u003c\/p\u003e\u003cp\u003eIts polypropylene fibers are UV stabilized, and the line is resistant to rot, oils, gasoline, and most chemicals. That makes it a practical choice for boats that stay outside, see regular dockside use, or need a compact anchor line that is easy to spot and recover.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1\/4 inch diameter and 50 foot length for anchor systems that call for this line size and scope\u003c\/li\u003e\n\u003cli\u003eHollow-braid polypropylene construction with a line that floats on the surface\u003c\/li\u003e\n\u003cli\u003eWhite rope is easier to track in darker water and around the dock\u003c\/li\u003e\n\u003cli\u003eUV-stabilized fibers help the line stand up better to sun exposure\u003c\/li\u003e\n\u003cli\u003eResistant to rot, oils, gasoline, and most chemicals commonly encountered around boats and marinas\u003c\/li\u003e\n\u003cli\u003eSupplied with a snap hook for quick connection to a compatible anchor eye or attachment point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check that your anchor setup is meant for 1\/4 inch line and that 50 feet gives you the scope you normally use in your anchoring depths. The snap hook also needs to match the eye or connection point on your anchor or related hardware.\u003c\/p\u003e\u003cp\u003eThis line suits boaters who want a floating anchor line for a tender, a smaller boat, or a spare anchor kit kept on board. If your setup depends on a sinking rode, heavier chain, or a different rope diameter, compare those requirements first.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eStow the line where it can run free without sharp bends or chafe points, and check that the snap hook closes fully after attachment. After use, a quick rinse and dry-out before longer storage will help keep the line easier to handle the next time it comes out of the locker.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551117902070,"sku":"APL275755","price":12.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322074_apl275755.webp?v=1787807796"},{"product_id":"apl939307","title":"Attwood Marine Lure Rack, Holds 25 Lures, Suction Cup or Screw Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11848-4 is a lure rack that holds up to 25 lures and keeps a fillet knife and pliers in the same spot, so the tackle you use most is easy to reach while you are fishing.\u003c\/p\u003e\u003cp\u003eIt mounts with the included suction cups when you want a removable setup, or it can be fixed in place with separately purchased screws for a more permanent installation. That makes it a practical fit for a cockpit, rigging area, or other tackle-prep space where loose hooks and hand tools tend to collect.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to 25 lures in one rack\u003c\/li\u003e\n\u003cli\u003eBuilt-in space for a fillet knife and pliers\u003c\/li\u003e\n\u003cli\u003eIncluded suction cups support removable mounting\u003c\/li\u003e\n\u003cli\u003eCan also be permanently mounted with separately purchased screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis rack works well on boats where tackle changes happen often through the day. The suction cup mount suits setups that are moved between trips or taken down for cleaning, while screw mounting makes more sense when the rack will stay in one place full time.\u003c\/p\u003e\u003cp\u003eKeeping lures, pliers, and a knife together also helps clear work surfaces and keeps sharp gear from ending up loose in a tray, locker, or on the deck. Screws are not included for permanent mounting.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers who troll, cast, or switch presentations often and want used lures parked in one place instead of mixed into tackle boxes or laid around the boat. It also fits well near a bait station or fillet area where pliers and a knife need to stay close by.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551119114486,"sku":"APL939307","price":10.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713367_apl939307.jpg?v=1787807889"},{"product_id":"apl403735","title":"Attwood Marine Grapnel Anchor System, 3.5 lb, 25 ft Rope, Storage Case","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 11969-4 is a 3.5 lb grapnel anchor system for small watercraft such as personal watercraft, canoes, dinghies, kayaks, and float tubes. It includes a folding grapnel anchor, 25 ft of rope, a marker buoy, a giant snap hook, and a nylon storage case, so the basic anchoring gear is together in one kit.\u003c\/p\u003e\u003cp\u003eThis setup is built for short stops and light craft use where space is limited and gear needs to stay easy to stow. The grapnel pattern helps it bite into sand, mud, gravel, and rock, which makes it useful for shoreline breaks, fishing pauses, and holding position off the beach with smaller boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3.5 lb grapnel anchor sized for small craft and compact storage\u003c\/li\u003e\n\u003cli\u003e25 ft rope included for quick setup without sourcing a separate anchor line\u003c\/li\u003e\n\u003cli\u003eWorks in sand, mud, gravel, and rock\u003c\/li\u003e\n\u003cli\u003eMarker buoy and giant snap hook help with deployment, handling, and retrieval\u003c\/li\u003e\n\u003cli\u003eNylon storage case keeps the kit together and helps prevent scratches during transport and stowage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis anchor system makes the most sense for owners of smaller boats and paddle craft who need a light anchor that is easy to carry and simple to pack away after use. It suits day trips, near-shore use, and calm-water stops where a full-size anchor setup would take up too much room.\u003c\/p\u003e\u003cp\u003eFor buyers comparing options, the main fit points here are the 3.5 lb anchor weight, the included 25 ft rope, and the intended use on compact vessels rather than larger boats with heavier anchoring loads.\u003c\/p\u003e\u003ch6\u003eDeployment and storage\u003c\/h6\u003e\u003cp\u003eBecause the kit comes with the anchor, line, buoy, hook, and case, it is straightforward to keep it ready in a locker, under a seat, or with other grab-and-go gear. The storage case also helps keep the anchor from rubbing against nearby surfaces when the boat is trailered or when the gear is packed with other equipment.\u003c\/p\u003e\u003cp\u003eThis is a practical match for paddlers, tender owners, and PWC riders who want one compact anchoring kit instead of piecing together separate components.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3.5 lb grapnel anchor\u003c\/li\u003e\n\u003cli\u003e25 ft rope\u003c\/li\u003e\n\u003cli\u003eMarker buoy\u003c\/li\u003e\n\u003cli\u003eGiant snap hook\u003c\/li\u003e\n\u003cli\u003eNylon storage case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551152865526,"sku":"APL403735","price":63.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713466_apl403735.jpg?v=1787809125"},{"product_id":"apl157027","title":"Attwood Marine Stowaway Bi-Color Plug-In Pole Light, Task Light, 10 in, 3-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 5095-10-7 is a 12-volt bi-color stowaway pole light with an integrated task light for boats up to 39.6 ft. (12 m). It uses a 10 inch straight pole and shows a 225 degree red and green navigation light visible for 1 nautical mile, while the separate task light adds focused light at the bow for rigging lines, handling tackle, or checking gear after dark.\u003c\/p\u003e\u003cp\u003eThis light suits boats that use a removable bow light and need a little extra working light at the front of the boat without adding another fixture. The housing is polycarbonate that resists impact and UV exposure, and the pole uses a 3-pin locking collar connection to stay seated in a compatible base.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-volt bi-color navigation light with a separately switched task light in the same assembly\u003c\/li\u003e\n\u003cli\u003e10 inch straight pole for a low-profile bow setup that still lifts the light above nearby hardware\u003c\/li\u003e\n\u003cli\u003e225 degree red and green light output with 1 nautical mile visibility for boats up to 39.6 ft. (12 m)\u003c\/li\u003e\n\u003cli\u003e3-pin locking collar pole for use with a compatible 3-pin plug-in base\u003c\/li\u003e\n\u003cli\u003ePolycarbonate housing that resists impact and UV exposure\u003c\/li\u003e\n\u003cli\u003eRear rubber push-on switch for task light operation at the bow\u003c\/li\u003e\n\u003cli\u003eMeets USCG CFR 183.810 and ABYC A-16 requirements\u003c\/li\u003e\n\u003cli\u003eCombination light requires a 1-amp fuse, and the task light requires its own 1-amp fuse on a separate circuit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis model is built for a standard 3-pin pole-light installation on a 12V system. The navigation light and the task light do not share the same switched feed, so the bow wiring needs a fused 12V feed for the combination light and a second fused 12V feed for the task light.\u003c\/p\u003e\u003cp\u003eFor proper placement, the base should be mounted as far forward as practical on a surface that is smooth and free of obstructions on the gunwale, deck, or superstructure. On boats using a conventional navigation-light layout, this bow light works with a three-position switch arrangement for running lights, anchor light, and off alongside the boat's all-round light.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 10 inch pole is a sensible match for skiffs, center consoles, bass boats, and other layouts where a removable bow light needs to clear nearby deck hardware without using a much taller pole. The locking collar matters on boats that see regular trailering or bow vibration because it helps keep the pole engaged in the base instead of relying on a loose drop-in fit.\u003c\/p\u003e\u003cp\u003eThis is a good fit for owners replacing an older 3-pin incandescent bow light and for anglers who want navigation lighting and a small work light at the bow in one assembly. It is not a complete base-and-light kit, so the boat needs a compatible 3-pin base already installed or added separately.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551155486966,"sku":"APL157027","price":64.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322233_apl157027_jpeg.jpg?v=1787809218"},{"product_id":"apl701097","title":"Attwood Marine Portable LED Navigation Light Kit, Bow \u0026 Stern, 3 AAA","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine LED portable navigation light kit is a battery-powered bow and stern light set for small boats, tenders, personal watercraft, kayaks, hunting boats, and other craft that need removable navigation lighting without wiring into a 12V system. The kit uses LED red and green bow lighting and a white stern light, giving boaters a practical way to add visibility for low-light operation, launching before sunrise, returning after sunset, or keeping a compact backup light kit on board.\u003c\/p\u003e\u003cp\u003eEach light runs on 3 AAA batteries, with batteries purchased separately. The lights use sealed electronics, a shock-proof composite housing, and a shatter-proof polycarbonate lens, with a rated run time of more than 150 hours. Since the lights are portable, they can be removed for storage, trailering, or use across more than one small craft when the mounting setup matches the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBattery-powered LED navigation light kit for boats that do not have fixed navigation lighting or an onboard electrical system ready for lights.\u003c\/li\u003e\n\u003cli\u003eIncludes red and green bow lighting and a white stern light for basic navigation visibility on small craft.\u003c\/li\u003e\n\u003cli\u003eEach light operates on 3 AAA batteries, so installation does not require routing wire, adding a switch, or connecting to a 12V circuit.\u003c\/li\u003e\n\u003cli\u003eSealed electronics help protect the light engines from the wet conditions common around small boats, docks, launches, and spray.\u003c\/li\u003e\n\u003cli\u003eShock-proof composite housing and shatter-proof polycarbonate lens help the lights stand up to regular handling, storage, and transport.\u003c\/li\u003e\n\u003cli\u003eMore than 150 hours of run time supports repeated short outings before battery replacement is needed.\u003c\/li\u003e\n\u003cli\u003eQuick-release mounts make the lights easier to remove after use, which helps reduce exposure, theft risk, and damage during trailering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis kit is offered across several configurations that vary by mounting style, finish, and pole style. The range includes clamp-on, deck mount, and all-craft navigation versions, with Marine Gray and Realtree Max-5 Camouflage finish options.\u003c\/p\u003e\u003cp\u003ePole styles vary between threaded and telescoping versions depending on the configuration. The same general purpose remains consistent across the range: portable LED bow and stern navigation lighting for small craft where removable, battery-powered lights are the right fit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe main fit decision is the mounting style. Clamp-on versions are useful where a temporary attachment point is available and drilling is not wanted. Deck mount versions suit boats where a more defined mounting point is preferred. All-craft navigation versions add flexibility for small craft setups where the light position may need to adapt to the boat shape and available surfaces.\u003c\/p\u003e\u003cp\u003eBefore heading out, confirm that the bow light is positioned so the red and green sectors face the correct direction and that the stern light is high enough to stay visible from behind the boat. Battery contacts should be clean and dry, and spare AAA batteries are worth keeping aboard for early morning launches, evening returns, and multi-day trips.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a practical match for small craft owners who need navigation lights only when conditions require them, or who use boats that do not justify a permanent lighting installation. It also makes sense for tenders, jon boats, paddlecraft, and hunting boats where removable gear is easier to store and protect between trips.\u003c\/p\u003e\u003cp\u003eBecause the lights are portable and battery-operated, they are best treated as part of a small-boat safety setup rather than a replacement for a hardwired system on larger vessels. Always confirm that the selected light configuration and vessel use comply with local navigation light rules for the boat type, length, and operating speed.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRed and green LED bow light\u003c\/li\u003e\n\u003cli\u003eWhite LED stern light\u003c\/li\u003e\n\u003cli\u003eQuick-release light mounts\u003c\/li\u003e\n\u003cli\u003ePole\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Attwood Marine","offers":[{"title":"Marine Gray \/ Deck Mount \/ Telescoping","offer_id":51551160303862,"sku":"APL701097-V5","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Realtree Max-5 Camouflage \/ All-Craft Navigation \/ Threaded","offer_id":51551160336630,"sku":"APL701097-V8","price":123.36,"currency_code":"USD","in_stock":false},{"title":"Realtree Max-5 Camouflage \/ Clamp-On \/ Threaded","offer_id":51551160369398,"sku":"APL701097-V2","price":54.3,"currency_code":"USD","in_stock":true},{"title":"Marine Gray \/ Clamp-On \/ Threaded","offer_id":51551160402166,"sku":"APL701097-V1","price":43.44,"currency_code":"USD","in_stock":true},{"title":"Marine Gray \/ Clamp-On \/ Telescoping","offer_id":51551160434934,"sku":"APL701097-V3","price":46.7,"currency_code":"USD","in_stock":true},{"title":"Realtree Max-5 Camouflage \/ Clamp-On \/ Telescoping","offer_id":51551160467702,"sku":"APL701097-V4","price":67.99,"currency_code":"USD","in_stock":false},{"title":"Realtree Max-5 Camouflage \/ Deck Mount \/ Telescoping","offer_id":51551160500470,"sku":"APL701097-V6","price":69.99,"currency_code":"USD","in_stock":false},{"title":"Marine Gray \/ All-Craft Navigation \/ Threaded","offer_id":51551160533238,"sku":"APL701097-V7","price":111.14,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324804_apl701097.webp?v=1787809502"},{"product_id":"apl006344","title":"Attwood Marine Turbo 3000 Series Water-Resistant In-Line Bilge Blower, 3 in, 12V, 145 CFM, White Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 1733-4 is a 12V in-line bilge blower for 3 inch ventilation hose, used to move air through engine compartments, bilges, galleys, and heads where moisture is part of the environment.\u003c\/p\u003e\u003cp\u003eThis is the water-resistant version in white. It is rated at 145 CFM open flow at 13.6 V, with 100 CFM in a typical installed system, and it draws about 3.1 amps with a 4-amp fuse. The blower is ignition protected and mounts in-line with built-in feet, so it can be fitted vertically or horizontally when space around the duct run is limited.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eFits 3 inch I.D. ventilation hose for common bilge blower replacement work\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12V DC operation with 145 CFM open flow and 100 CFM in-system airflow\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWater-resistant construction with a motor cap that seals the wires and motor\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIgnition-protected housing for ventilated spaces that can collect fuel vapors\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in mounting feet support vertical or horizontal installation\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNickel-plated motor can helps resist corrosion in damp marine spaces\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTabs at the intake and exhaust help keep hose and clamp seated\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e16-gauge tinned copper wire leads and two tie straps are included\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis blower installs in a 3 inch duct run and mounts with #10 fasteners. The in-line body works well in transom, under-deck, and other confined spaces where hose routing leaves little room around the blower itself.\u003c\/p\u003e\u003cp\u003eIt is a sensible match for owners replacing an older 3 inch blower on a 12V system or adding forced ventilation to enclosed spaces on board. Water-resistant construction suits damp locations, but this model should not be installed where it will sit in direct contact with water or other liquids.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor buyers checking system fit, this blower is for 12V DC wiring and a 3 inch ventilation layout. The published airflow figure is measured at 13.6 V, so real output on board will depend on hose length, bends, vents, and other restrictions in the run.\u003c\/p\u003e\u003cp\u003eThat makes it a good fit for boats that already use 3 inch ducting and need a like-for-like replacement without changing hose size, mounting direction, or basic electrical setup.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51551164236022,"sku":"APL006344","price":39.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713288_apl006344.jpg?v=1792623859"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/03c2dadc-eee5-4f73-b285-f29d4a561912.webp?v=1787791229","url":"https:\/\/www.apollolighting.com\/collections\/brand-attwood-marine.oembed?page=2","provider":"Apollo Lighting","version":"1.0","type":"link"}