{"title":"Blue Sea Systems","description":"","products":[{"product_id":"apl569628","title":"Blue Sea Systems Traditional Metal AC Main Circuit Breaker Panel, 120V AC, White Toggle Breakers, Non-Metered","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Traditional Metal AC Main Breaker Panel is a non-metered 120V AC distribution panel range for boats that need a main AC disconnect with clearly organized branch circuit positions. It uses the Traditional Metal panel format with white toggle breakers, backlit circuit label positions, green ON indicator LEDs, and a red reverse-polarity indicator LED for quick visual checks at the panel.\u003c\/p\u003e\u003cp\u003eThis range covers compact and larger AC layouts, from 1 to 22 positions, with panel face sizes from 5.25in x 3.75in up to 14.75in x 7.50in. The hot, neutral, and safety ground buses are installed and pre-wired, which helps keep the AC side of a refit or panel replacement cleaner and easier to plan.\u003c\/p\u003e\u003cp\u003eThese panels are a practical fit for 120V AC onboard systems where metering is not required at the panel itself, or where voltage and current monitoring are handled elsewhere in the vessel. They are not for 12V or 24V DC distribution.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC non-metered panel range for onboard AC main and branch circuit distribution.\u003c\/li\u003e\n\u003cli\u003e30A double-pole white toggle AC main breaker format across the range.\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired for a cleaner installation path.\u003c\/li\u003e\n\u003cli\u003eRed reverse-polarity indicator LED gives a visible warning at the panel when incoming AC polarity is incorrect.\u003c\/li\u003e\n\u003cli\u003eGreen ON indicator LEDs are installed in circuit positions for quick status checks.\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions are included on standard panels, with no separate backlight kit required.\u003c\/li\u003e\n\u003cli\u003eMultiple panel sizes and position counts let the panel match both available dash space and the number of AC circuits on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in several Traditional Metal AC Main configurations for different panel spaces and AC circuit counts.\u003c\/p\u003e\u003cp\u003eThe confirmed differences between variants are the number of positions and the panel face size. The range keeps the same 120V AC, non-metered AC main panel concept with white toggle breaker styling, pre-wired AC buses, backlit label positions, ON indicator LEDs, and reverse-polarity indication.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8027: 6 positions, 5.25in wide x 7.50in high. This vertical layout works well where the mounting area is narrow but has enough height for a medium AC circuit count.\u003c\/li\u003e\n\u003cli\u003e8464: 14 positions, 10.50in wide x 7.50in high. This wider layout gives more branch circuit capacity while keeping the same 7.50in panel height.\u003c\/li\u003e\n\u003cli\u003e8465: 22 positions, 14.75in wide x 7.50in high. This is the largest layout in this group and fits more complete AC distribution arrangements on larger refits.\u003c\/li\u003e\n\u003cli\u003e8029: 1 position, 5.25in wide x 3.75in high. This compact layout is useful where only a small AC main panel footprint is available.\u003c\/li\u003e\n\u003cli\u003e8099: 4 positions, 10.50in wide x 3.75in high. This low-height layout spreads the positions across a wider face, which can help when vertical dash or bulkhead space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMatch the panel to the vessel’s 120V AC wiring plan before cutting or replacing an existing panel. The position count should cover the required AC circuits with room for the way the boat is actually used, whether that includes cabin outlets, battery charging, galley equipment, water heating, air conditioning, or other onboard AC loads.\u003c\/p\u003e\u003cp\u003eThe pre-wired buses reduce some of the layout work, but final AC wiring still needs correct conductor sizing, breaker selection, strain relief, labeling, and safe routing behind the panel. AC panel work should be done with the system de-energized and checked by a qualified marine electrician when there is any uncertainty.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel range is for 120V AC marine electrical systems. It should not be used as a DC breaker panel, and it should be matched to the vessel’s AC source arrangement, existing protection scheme, and available mounting space.\u003c\/p\u003e\u003cp\u003eBecause the panels are non-metered, they keep the front face simpler and are a good match when a separate meter, monitoring system, or existing AC source equipment already handles voltage or current display. Before ordering, compare the variant face dimensions with the available cutout area, surrounding trim, wire clearance behind the panel, and the space needed to operate the white toggle breakers comfortably.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"14 \/ 10.50in x 7.50in","offer_id":51550278910198,"sku":"APL569628-V13","price":916.99,"currency_code":"USD","in_stock":false},{"title":"6 \/ 5.25in x 7.50in","offer_id":51550278942966,"sku":"APL569628-V95","price":449.99,"currency_code":"USD","in_stock":true},{"title":"22 \/ 14.75in x 7.50in","offer_id":51550278975734,"sku":"APL569628-V19","price":1268.99,"currency_code":"USD","in_stock":false},{"title":"4 \/ 10.50in x 3.75in","offer_id":51550279008502,"sku":"APL569628-V81","price":508.99,"currency_code":"USD","in_stock":true},{"title":"1 \/ 5.25in x 3.75in","offer_id":51550279041270,"sku":"APL569628-V02","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325050_apl569628.webp?v=1787789576"},{"product_id":"apl106819","title":"Blue Sea Systems 8200 Series Digital Meter, 14.29 mm Display, Splashproof Front","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Digital Meter is a panel-mounted meter range for monitoring important AC or DC electrical values on boats, including voltage, current, frequency, and power depending on the selected configuration. The range covers DC input versions from 7-60V DC or 8-32V DC, and AC input versions from 80-249V AC, so the correct choice depends on the circuit being monitored.\u003c\/p\u003e\u003cp\u003eThese meters suit helm stations, electrical panels, battery monitoring points, inverter or shore power panels, and other locations where a clear digital readout helps the operator keep an eye on system condition. Several versions include three display brightness levels, a splashproof front, and sleep mode for reduced power use when the display is not needed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDigital display options for voltage, current, frequency, and multi-function AC or DC monitoring, depending on the selected meter.\u003c\/li\u003e\n\u003cli\u003eDC voltage versions monitor 0 to 60V DC, covering common 12, 24, 32, 36, and 42V DC boat systems.\u003c\/li\u003e\n\u003cli\u003eAC voltage versions monitor 80 to 270V AC, useful for shore power, generator, and onboard AC distribution panels.\u003c\/li\u003e\n\u003cli\u003eCurrent-reading DC configurations measure up to -500 to +500A and use a 500A shunt for high-current monitoring.\u003c\/li\u003e\n\u003cli\u003eCurrent-reading AC configurations measure 0 to 150A and use a current transformer for AC load monitoring.\u003c\/li\u003e\n\u003cli\u003eSelected alarm versions add audio and visual alerts for high and low voltage, and the AC multi-function version also includes high current alarm capability.\u003c\/li\u003e\n\u003cli\u003eThree display brightness levels help the readout stay usable in changing cockpit, cabin, and panel lighting conditions.\u003c\/li\u003e\n\u003cli\u003eSplashproof front helps protect the meter face in exposed or semi-exposed marine panel locations.\u003c\/li\u003e\n\u003cli\u003eSingle-meter format works with compatible Blue Sea Systems mounting panels and blank meter panels for clean panel integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Digital Meter range varies by measured function and input voltage. Options include DC voltage, DC current, AC voltage, AC current, AC frequency, and multi-function configurations that combine several readings in one display.\u003c\/p\u003e\u003cp\u003eThe DC models cover low-voltage boat electrical systems, while the AC models are used on higher-voltage AC circuits such as shore power or generator-fed panels. Alarm capability is included only on specific versions, so it should be matched to the level of monitoring required for the installation.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor DC installations, the voltage-only versions are used to watch battery banks or DC distribution voltage, while the current and multi-function versions are better suited to charge and load monitoring. DC current meters that operate through a shunt are normally installed on the negative side of the circuit; positive-side current measurement requires the correct shunt shifter accessory.\u003c\/p\u003e\u003cp\u003eFor AC installations, the voltage, current, frequency, and multi-function options help monitor shore power, generator output, and AC distribution behavior. The AC multi-function configuration combines current, voltage, frequency, and power readings, which can reduce panel clutter when several AC values need to be checked from one location.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThese meters are a practical fit for electrical panels where quick visual confirmation matters, such as a helm electrical station, nav station, machinery space panel, or main AC\/DC distribution board. The display brightness settings are useful on boats that move between daylight operation, night running, and dim cabin lighting.\u003c\/p\u003e\u003cp\u003eBefore ordering, match the meter to the circuit type, input voltage range, and value being monitored. A DC meter should not be substituted for an AC circuit, and a voltage meter will not provide current, frequency, or power readings unless those functions are part of the selected configuration.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Voltage \/ 7-60V DC","offer_id":51550305878262,"sku":"APL106819-V1","price":261.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ 8-32V DC","offer_id":51550305911030,"sku":"APL106819-V2","price":310.99,"currency_code":"USD","in_stock":false},{"title":"Voltage with Alarm \/ 7-60V DC","offer_id":51550305943798,"sku":"APL106819-V8","price":294.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ Voltage \/ 7-60V DC","offer_id":51550305976566,"sku":"APL106819-V7","price":400.99,"currency_code":"USD","in_stock":true},{"title":"Frequency \/ 80-249V AC","offer_id":51550306009334,"sku":"APL106819-V5","price":310.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ Frequency \/ Power \/ Voltage \/ 80-249V AC","offer_id":51550306042102,"sku":"APL106819-V6","price":440.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ 80-249V AC","offer_id":51550306074870,"sku":"APL106819-V4","price":378.99,"currency_code":"USD","in_stock":true},{"title":"Voltage \/ 80-249V AC","offer_id":51550306107638,"sku":"APL106819-V3","price":310.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325144_apl106819.webp?v=1787790387"},{"product_id":"apl255392","title":"Blue Sea Systems Triple Battery Bank Management Panel, 12\/24V DC, 32V Max","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Triple Battery Bank Management Panel is a battery switching and circuit protection panel for twin-engine boats using three battery banks. It combines two Dual Circuit Plus battery switches with push-button 24-hour circuit breakers and a 100A C-Series flat rocker circuit breaker, giving the helm or electrical panel a clearer way to manage start and house battery circuits.\u003c\/p\u003e\u003cp\u003eThis panel supports 12V and 24V DC systems with a maximum voltage of 32V DC. It is built around separate engine and house circuit control, emergency cross-connect between isolated battery banks, and protection for sensitive electronics from voltage sags and spikes that can happen during engine cranking.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for boats that need organized battery control without turning battery switching into a complicated routine. With the addition of two Automatic Charging Relays, charging can be automated across three battery banks while keeping the switching layout easy to understand.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for twin-engine battery systems with three battery banks when used with Automatic Charging Relays.\u003c\/li\u003e\n\u003cli\u003eSupports 12V and 24V DC installations, with a maximum voltage rating of 32V DC.\u003c\/li\u003e\n\u003cli\u003eSeparates engine and house circuits so house loads are less likely to drain the starting battery.\u003c\/li\u003e\n\u003cli\u003eAllows emergency cross-connect between isolated battery banks when backup starting power is needed.\u003c\/li\u003e\n\u003cli\u003eHelps protect onboard electronics from voltage spikes and sags during engine cranking.\u003c\/li\u003e\n\u003cli\u003eIncludes push-button thermal circuit breakers rated at 15A for 24-hour circuits.\u003c\/li\u003e\n\u003cli\u003eUses a 100A C-Series flat rocker circuit breaker for main circuit protection.\u003c\/li\u003e\n\u003cli\u003eIgnition protected for installation aboard gasoline-powered boats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis panel is offered in two configurations, with the position count and panel layout changing between versions.\u003c\/p\u003e\u003cp\u003eBoth variants serve the same core battery-management role for twin-engine boats, but their current ratings, dimensions, included switch type, and number of 15A push-button breakers differ by configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8689, Positions 7. This version uses two m-Series Mini Dual Circuit Plus battery switches and has a square 7.25 in by 7.25 in panel footprint, which suits installations where panel space is tighter.\u003c\/li\u003e\n\u003cli\u003e8693, Positions 11. This version uses two e-Series Dual Circuit Plus battery switches and has a wider 8.00 in by 10.50 in layout, giving more panel space for the additional 24-hour circuit breaker positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical ratings\u003c\/h6\u003e\u003cp\u003eThe 8689 variant is rated for 300A continuous current, 450A intermittent current for 5 minutes, 1000A cranking current for 10 seconds, and 650A cranking current for 1 minute.\u003c\/p\u003e\u003cp\u003eThe 8693 variant is rated for 350A continuous current, 525A intermittent current for 5 minutes, 1000A cranking current for 10 seconds, and 750A cranking current for 1 minute.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe panel is intended for main battery distribution on boats where start and house banks need to stay isolated during normal operation but remain available for emergency parallel connection. It belongs in a dry, serviceable electrical area where the switches, breakers, labels, and wiring can be reached for operation and inspection.\u003c\/p\u003e\u003cp\u003eBecause this is a high-current battery management component, cable sizing, overcurrent protection, terminal torque, and routing should match the vessel electrical plan. Installation should also account for engine-room vibration, battery cable strain relief, and access for resetting the push-button breakers.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis panel is a strong match for twin-engine cruising boats, fishing boats, and workboats that carry separate starting and house loads. It is especially useful where electronics, refrigeration, lighting, pumps, and other house circuits need to stay separated from the starting batteries during normal use.\u003c\/p\u003e\u003cp\u003eFor owners upgrading from scattered battery switches or unclear breaker layouts, this panel brings the main battery functions into one labeled control point, making everyday switching and emergency battery linking easier to manage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8689: two 6011 m-Series Mini Dual Circuit Plus battery switches, three 7056 15A push-button reset circuit breakers, and one 7549 100A C-Series single-pole flat rocker circuit breaker.\u003c\/li\u003e\n\u003cli\u003e8693: two 5511e e-Series Dual Circuit Plus battery switches, four 7056 15A push-button reset circuit breakers, and one 7549 100A C-Series single-pole flat rocker circuit breaker.\u003c\/li\u003e\n\u003cli\u003e4218 square format labels and 4140 24-hour round labels.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"7","offer_id":51550306861302,"sku":"APL255392-V7","price":605.99,"currency_code":"USD","in_stock":true},{"title":"11","offer_id":51550306894070,"sku":"APL255392-V6","price":616.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325896_apl255392.webp?v=1787790445"},{"product_id":"apl237895","title":"Blue Sea Systems AC Analog Voltmeter, 2.75 in Face, Backlit Face","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Blue Sea Systems AC analog voltmeter is a panel-mounted meter for monitoring AC voltage on a boat, with two available ranges: 0-150V AC and 0-250V AC. It uses a 2.75 in face and a dial marked in 5V increments, so the reading is easy to check at the electrical panel without scrolling through a digital display.\u003c\/p\u003e\u003cp\u003eThe meter connects with a simple 2-wire connection to AC hot and neutral, and the meter sensing and operating power come from that same connection. Backlighting helps the scale stay readable at night or in a dim cabin, helm, or electrical locker.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for AC distribution panels where the crew wants a quick visual check of shore power, generator output, or inverter-fed AC voltage before and during use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAnalog AC voltmeter range options for 0-150V AC or 0-250V AC systems.\u003c\/li\u003e\n\u003cli\u003e2.75 in face size for standard panel layouts where a full-size analog meter is preferred.\u003c\/li\u003e\n\u003cli\u003eDial marked in 5V increments to make voltage changes easier to see at a glance.\u003c\/li\u003e\n\u003cli\u003eSimple 2-wire connection to AC hot and neutral for the meter circuit.\u003c\/li\u003e\n\u003cli\u003eMeter senses voltage and powers itself from the same AC connection.\u003c\/li\u003e\n\u003cli\u003eBacklit face for better visibility in low-light panel locations.\u003c\/li\u003e\n\u003cli\u003eBacklight wiring supports 12V or 24V DC panel lighting circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis AC analog voltmeter is offered in two voltage ranges for different AC panel applications.\u003c\/p\u003e\u003cp\u003eThe voltage scale is the main difference between the variants. Both versions use the same 2.75 in face size, 5V dial increments, 2-wire AC hot and neutral connection, self-powered meter operation from the measured AC circuit, and backlit meter face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e9353: Voltage 0-150V. This scale suits AC panels where the monitored voltage stays within a 150V AC range, such as common 120V shore power, generator, or inverter circuits.\u003c\/li\u003e\n\u003cli\u003e9354: Voltage 0-250V. This wider scale covers AC systems where the panel needs to monitor voltage up to 250V AC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe meter circuit connects to the AC hot and neutral lines being measured, so it can read the circuit directly while drawing its own operating power from that connection. The backlight is wired separately to a DC lighting source: red and yellow are used for 12V backlighting, while orange and yellow are used for 24V backlighting, with yellow connected to negative.\u003c\/p\u003e\u003cp\u003eBecause this meter is installed on an AC electrical panel, wiring should match the vessel’s AC distribution layout and be handled with proper isolation, overcurrent protection, and safe working practices for marine AC systems.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis meter is useful at the main AC panel, a shore power panel, a generator panel, or an inverter output panel where a fast visual voltage check matters. It gives the operator a steady reference before energizing AC loads and makes it easier to spot low or high voltage conditions while connected at the dock or running onboard AC power.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"0-250V","offer_id":51550329471222,"sku":"APL237895-V6","price":55.99,"currency_code":"USD","in_stock":true},{"title":"0-150V","offer_id":51550329503990,"sku":"APL237895-V3","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370892_apl237895_jpeg.jpg?v=1787791066"},{"product_id":"apl725529","title":"Blue Sea Systems easyID ATC Fuse Kit, 31-Piece, 32V DC, LED Blown-Fuse Indication","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 5290 is an illuminated ATC fuse kit for 12V and 24V DC systems that makes a blown fuse easy to spot behind a dash, inside a helm console, or in any fuse panel with poor light. The kit includes 31 fast-acting easyID fuses plus a fuse puller, and the fuses are rated for up to 32V DC.\u003c\/p\u003e\u003cp\u003eIt replaces standard ATO and ATC blade fuses, so it fits the same style holders and fuse blocks already used on many boats. That makes it a straightforward spare kit for onboard electrical service without changing the panel or fuse format.\u003c\/p\u003e\u003cp\u003eFor owners who troubleshoot their own DC system, this kit is useful where fuse panels sit under the helm, behind access panels, or inside lockers where a blown fuse can be hard to find at a glance.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIlluminated ATC blade fuses with LED indication when a fuse has blown\u003c\/li\u003e\n\u003cli\u003eDirect replacement for standard non-illuminating ATO and ATC fuses\u003c\/li\u003e\n\u003cli\u003e31-piece assortment with a fuse puller for onboard spares and routine service\u003c\/li\u003e\n\u003cli\u003eCovers 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, and 40A circuit protection needs\u003c\/li\u003e\n\u003cli\u003eFast-acting fuse style for common branch circuits on marine DC systems\u003c\/li\u003e\n\u003cli\u003e32V DC maximum operating voltage and 1000A interrupt capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for fuse positions that take standard ATO or ATC blade fuses. It is not a match for mini, maxi, glass, ANL, or MRBF fuse locations, so the fuse style on the boat should be checked before ordering.\u003c\/p\u003e\u003cp\u003eBecause the assortment covers common amp ratings used on accessory and branch circuits, it works well as a spare kit for lighting, pumps, electronics, and other fused 12V or 24V loads that already use the ATO or ATC format.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners, installers, and service techs who want quicker fault finding in low-light spaces and a wider range of spare fuse ratings in one case. It suits cruising boats, center consoles, skiffs, and workboats where access to the fuse panel is often tight and lighting is limited.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 fuse puller\u003c\/li\u003e\n\u003cli\u003e3 x 3A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 5A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 7.5A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 10A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e6 x 15A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 20A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 25A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 30A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 40A easyID ATC fuses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550346117366,"sku":"APL725529","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369536_apl725529_jpeg.jpg?v=1787791687"},{"product_id":"apl304392","title":"Blue Sea Systems Contura Single Bilge Pump Control Panel, 12\/24V DC, IP66, ON-Off-Auto","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8263 is a control panel for a single bilge pump, with a water-resistant face and an ON-OFF-AUTO Contura switch, for 12V or 24V DC systems. It fits a compact panel space at 3.75 in high, 2.25 in wide, and 3.00 in deep.\u003c\/p\u003e\u003cp\u003eThe switch is rated for 20A at 12V DC and 15A at 24V DC, and the fuse holder accepts commonly available AGC and MDL glass fuses up to 20A. An embedded ON LED shows when the pump circuit is running, which helps when you want a quick status check from the helm or dash.\u003c\/p\u003e\u003cp\u003eThis panel gives you a clean control point for manual and automatic bilge pump operation without piecing together separate switch and fuse components. The watertight mounting gasket and water-resistant front suit installations that see spray, including flybridge and open cockpit layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle bilge pump control panel for 12V or 24V DC systems\u003c\/li\u003e\n\u003cli\u003eON-OFF-AUTO Contura switch with an embedded ON LED for pump status indication\u003c\/li\u003e\n\u003cli\u003eSwitch rating of 20A at 12V DC and 15A at 24V DC\u003c\/li\u003e\n\u003cli\u003eFuse holder accepts AGC and MDL glass fuses up to 20A\u003c\/li\u003e\n\u003cli\u003eWater-resistant front with a watertight mounting gasket for exposed mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-wired construction helps shorten installation time and keeps wiring work more straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe panel comes pre-wired, so the job is mainly mounting the unit, tying it into the bilge pump circuit, and fitting the correct AGC or MDL glass fuse for the load. Its compact face makes it easier to place on a helm panel, console face, or other small switch area where space is limited.\u003c\/p\u003e\u003cp\u003ePlan for about 3 in of clearance behind the mounting surface. That extra depth check is worth doing before cutting into a dash panel or replacing an older control.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is meant for one bilge pump and works on either 12V or 24V DC boats. It is a practical fit where the owner wants a dedicated switch panel instead of a loose switch and inline fuse holder, and it uses AGC and MDL glass fuses that are easy to source in many marine service setups.\u003c\/p\u003e\u003cp\u003eIt suits owners replacing an older bilge pump control panel or adding a cleaner helm control on center consoles, walkarounds, pilot houses, and similar boats where the switch area may see spray and regular use.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550360830198,"sku":"APL304392","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322643_apl304392.webp?v=1787792009"},{"product_id":"apl284363","title":"Blue Sea Systems Contura Switch Mounting Panel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Contura Switch Mounting Panel is a modular mounting system for fitting Blue Sea Systems Contura switches into a helm, dash, cockpit, cabin, or equipment panel. The brackets are made to build clean switch banks in different sizes, with center and end pieces for grouped installations, a single-position option for one switch, and a plug for closing an unused switch opening.\u003c\/p\u003e\u003cp\u003eThe center, end, and single mounting brackets fit six panel thicknesses: 0.06\" (1.57mm), 0.09\" (2.36mm), 0.13\" (3.17mm), 0.19\" (4.75mm), 0.25\" (6.35mm), and 0.38\" (9.52mm). That range covers many common fiberglass, aluminum, and fabricated dash panels found on recreational and work boats.\u003c\/p\u003e\u003cp\u003eThis series is useful when a boat owner, installer, or electronics technician wants a Contura switch layout that looks organized and can be expanded without replacing the entire panel face. It is a hardware mounting product, so switch electrical ratings, circuit protection, and wiring details should be matched to the specific Contura switch and circuit being installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eModular bracket format supports switch groups in different sizes, with center and end pieces used to build multi-switch layouts.\u003c\/li\u003e\n\u003cli\u003eMounting bracket options are available for single-position layouts and grouped Contura switch banks.\u003c\/li\u003e\n\u003cli\u003eCenter, end, and single brackets fit six panel thicknesses from 0.06\" (1.57mm) through 0.38\" (9.52mm).\u003c\/li\u003e\n\u003cli\u003eWorks with Blue Sea Systems Contura switch families, including common SPST, SPDT, DPST, and DPDT Contura configurations.\u003c\/li\u003e\n\u003cli\u003ePanel plug option fills an unused Contura switch mounting panel opening for a cleaner dash or switch bank.\u003c\/li\u003e\n\u003cli\u003eCompact bracket format helps keep switch additions tidy on helm panels, cabin control panels, and accessory switch locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in four configurations for building or finishing a Contura switch mounting layout.\u003c\/p\u003e\u003cp\u003eThe mounting role changes by variant. The center and end brackets are used together for grouped switch banks, the single bracket is used for one switch position, and the plug fills an unused opening in a Contura switch mounting panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8266, Type Center. This center bracket is used within a multi-switch assembly, between end brackets, when adding switch positions to a grouped Contura layout.\u003c\/li\u003e\n\u003cli\u003e8267, Type End. This end bracket finishes the outside edge of a grouped switch bank and helps define the left or right side of the assembled panel opening.\u003c\/li\u003e\n\u003cli\u003e8278, Type Plug. This plug is used with a Contura switch mounting panel when a switch opening needs to be closed rather than populated with a switch.\u003c\/li\u003e\n\u003cli\u003e8268, Type Single. This single-position bracket is used when the panel only needs one Contura switch or control in that location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore cutting or modifying a panel, confirm the selected bracket type, the number of switch positions, and the panel thickness at the mounting location. The supported thickness range is especially helpful on boats where the dash or console may include fiberglass laminate, overlay panels, or custom electrical panel faces.\u003c\/p\u003e\u003cp\u003eFor grouped layouts, the center and end pieces should be planned as a set so the finished switch bank has the correct number of positions and a clean edge on both sides. For a single accessory switch, such as a light, pump, horn, or electronics power control, the single-position bracket keeps the installation compact.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese mounting panels suit refits, helm upgrades, and accessory additions where Contura rocker switches are already being used or are being added for a new circuit. They are a practical match for small control clusters at the helm, cockpit, cabin entry, flybridge, or equipment panel where a neat switch opening matters as much as the circuit layout.\u003c\/p\u003e\u003cp\u003eThe plug option is useful during staged upgrades. An installer can leave space for a future circuit and close the unused opening until the next switch is added.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Center","offer_id":51550368071926,"sku":"APL284363-V1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Single","offer_id":51550368104694,"sku":"APL284363-V7","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Plug","offer_id":51550368137462,"sku":"APL284363-V0","price":8.99,"currency_code":"USD","in_stock":true},{"title":"End","offer_id":51550368170230,"sku":"APL284363-V6","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370807_apl284363_jpeg.jpg?v=1787792264"},{"product_id":"apl569808","title":"Blue Sea Systems L-Series Solenoid Switch, 12\/24V, 250A, SPST-NO, Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 9012 is an L-Series solenoid switch for remote switching on 12V and 24V DC systems. It is a normally open SPST unit with a 250A continuous rating, a 275A rating for 5 minutes, and a 1000A cranking rating for 30 seconds, so it fits high-current jobs where the switching point needs to stay close to the battery or load.\u003c\/p\u003e\u003cp\u003eThis model is built for marine electrical systems that need remote on-off control without running heavy cable to the helm, switch panel, or another control point. The control circuit works across 9 to 36V DC, the contacts are hermetically sealed and vaporproof, and the sealed circuit board is IP67-rated. It is also ignition protected, which matters on gasoline-powered boats.\u003c\/p\u003e\u003cp\u003eOn board, this switch is commonly used for windlass circuits, remote battery switching, and other DC loads that need short heavy-cable runs with a small control wire routed to a convenient switch location. It makes the most sense where space is limited and where you do not need manual control at the solenoid itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWorks on 12V and 24V DC systems with a 9 to 36V DC control circuit\u003c\/li\u003e\n\u003cli\u003e250A continuous rating, 275A for 5 minutes, and 1000A cranking rating for 30 seconds\u003c\/li\u003e\n\u003cli\u003eSPST normally open contact form for remote on-off control of high-current circuits\u003c\/li\u003e\n\u003cli\u003eActivated by a low-amperage ON-OFF switch that can be mounted away from the solenoid\u003c\/li\u003e\n\u003cli\u003eIntegrated coil control keeps heat and steady current draw lower during operation\u003c\/li\u003e\n\u003cli\u003eHermetically sealed contacts, vaporproof construction, and an IP67-rated sealed circuit board\u003c\/li\u003e\n\u003cli\u003eIgnition protected for use on gasoline-powered boats\u003c\/li\u003e\n\u003cli\u003e20 AWG tinned-wire control leads and M8 terminal studs that accept 5\/16 inch ring terminals\u003c\/li\u003e\n\u003cli\u003eMounts with #10 or M5 fasteners and uses stainless steel terminal studs\u003c\/li\u003e\n\u003cli\u003eNo external coil suppression is required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis unit is usually mounted close to the battery bank or the load so the main cable run stays short and voltage drop stays easier to manage. The control side can then be taken to a helm switch, dash panel, or other convenient point with the factory 20 AWG tinned leads. Main cable connections land on M8 studs sized for 5\/16 inch terminals.\u003c\/p\u003e\u003cp\u003eThe switch should be mounted in a dry location. That layout suits many windlass and battery-control installations because the high-current path stays local while the operator still gets remote switching from elsewhere on the boat.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 9012 fits boats that run either a 12V or 24V DC electrical system and need a remote solenoid rather than a manual battery switch at the mounting point. Ignition protection makes it a practical choice for gasoline-powered boats, and the sealed contact design helps in marine spaces where moisture, spray, and vibration are part of normal use.\u003c\/p\u003e\u003cp\u003eThis is a good match for owners setting up a windlass control circuit, a remote battery disconnect arrangement, or another high-amperage DC circuit where a small control switch is easier to place than a heavy manual switch body.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550385242358,"sku":"APL569808","price":333.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371193_apl569808_jpeg.jpg?v=1787792921"},{"product_id":"apl727669","title":"Blue Sea Systems C-Series Triple-Pole Flat Rocker Circuit Breaker, 50A, 120\/240V AC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1168 is a 120\/240V AC 360 Panel System module with one installed 50A triple-pole C-Series flat rocker breaker. It is built for boats that need a compact main AC breaker section in a Blue Sea modular panel layout, with a rocker-style actuator and backlit label positions for easier circuit identification.\u003c\/p\u003e\u003cp\u003eThis module measures 4.75 in high, 4.88 in wide, and 3.00 in deep. The layout includes spare rocker apertures that can be used for single-pole 120V AC or double-pole 240V AC branch circuits, which helps when you are building out a panel around the way the boat is actually wired.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne installed 7565 C-Series flat rocker breaker with triple-pole 50A AC main protection\u003c\/li\u003e\n\u003cli\u003eBuilt for 120\/240V AC systems\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions with green LED illumination\u003c\/li\u003e\n\u003cli\u003e360 Panel System configuration includes spare rocker apertures for single-pole 120V AC or double-pole 240V AC branch circuits\u003c\/li\u003e\n\u003cli\u003eCompact panel size of 4.75 in x 4.88 in with 3.00 in depth behind the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module fits best in a Blue Sea 360 Panel System where a triple-pole 50A main breaker is required for a 120\/240V AC service. The main fit checks are your AC system voltage, the need for a triple-pole breaker, and the space available behind the mounting surface for the 3.00 in depth.\u003c\/p\u003e\u003cp\u003eIt is a practical match for refits and new installations on larger cruising boats, sportfishing boats, and other vessels that carry a 120\/240V AC distribution system rather than a simple single-voltage AC setup.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn board, this type of module usually sits at the main AC distribution point where incoming AC service is brought into the panel. The flat rocker format keeps operation straightforward, and the illuminated label area helps when the panel is mounted in a cabin, utility area, or another space that is often checked in low light.\u003c\/p\u003e\u003cp\u003eBecause this is part of the 360 Panel System, it makes sense when you are planning a panel with more than one function and want the breaker section to sit cleanly with the rest of the modules. The spare rocker apertures also leave room for additional branch circuit switching within the same panel layout.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550409851126,"sku":"APL727669","price":480.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369177_apl727669_jpeg.jpg?v=1787793896"},{"product_id":"apl569634","title":"Blue Sea Systems 360 Panel Combination Circuit Breaker Panel, 120V AC\/12V DC, 6 AC + 19 DC Positions, AC \u0026 DC Digital Meters","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1218 is a 360 Panel System combination circuit breaker panel with a 120V AC main section with 6 positions and a 12V DC main section with 19 positions. It brings AC and DC distribution together in one panel, which suits boats that need shore power circuits and a larger group of 12V house loads in the same electrical station.\u003c\/p\u003e\u003cp\u003eThis version includes an AC digital multi-function meter and a DC digital multi-function meter, along with factory-installed main and branch breakers on both sides of the panel. Overall size is 10.75 in high, 13.63 in wide, and 4.00 in deep, so it is worth checking panel depth, cable bend space, and rear access before cutting into a bulkhead or console face.\u003c\/p\u003e\u003cp\u003eThe AC side is set up with a double-pole 30A main and six 15A branch breakers. The DC side is set up with a 100A main and nineteen 15A branch breakers. For boats with a busy cabin or utility layout, that gives enough branch capacity for lighting, pumps, refrigeration, outlets, and electronics without splitting everything across separate panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC and 12V DC distribution combined in one 360 panel layout\u003c\/li\u003e\n\u003cli\u003e6 AC positions and 19 DC positions for boats with a higher branch circuit count\u003c\/li\u003e\n\u003cli\u003eIncludes AC Digital Multi-Function Meter 8247 and DC Digital Multi-Function Meter 8248\u003c\/li\u003e\n\u003cli\u003eFactory-installed AC and DC buses are pre-wired to speed up panel installation\u003c\/li\u003e\n\u003cli\u003eON-indicating LEDs are installed in all circuit positions\u003c\/li\u003e\n\u003cli\u003eLabel backlighting is pre-installed for easier circuit identification in low light\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus bars help with conductivity and corrosion resistance in marine service\u003c\/li\u003e\n\u003cli\u003eOpen-frame modular construction leaves room for later changes within the 360 panel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is built for boats with 120V AC service and a 12V DC distribution system. It fits installations where the owner or builder wants one finished panel for cabin AC loads and a broader group of DC loads instead of mixing separate breaker panels across different locations.\u003c\/p\u003e\u003cp\u003eIt is not the right match for 230V AC systems or 24V DC distribution. Before ordering, confirm the vessel voltage, the number of branch circuits needed now and later, and whether the mounting location can handle a 4.00 in panel depth plus wiring clearance behind the face panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause the buses are already installed and pre-wired, this panel cuts down setup work during a refit or new build. The modular 360 layout also makes sense when the electrical plan may change over time, since the panel starts with a finished structure instead of requiring a custom one-off build.\u003c\/p\u003e\u003cp\u003eMain breaker selection still matters because AC and DC panel amperage follows the installed AC main and DC main breakers. This panel is a good fit for cruisers, sportfishing boats, and similar vessels where a single AC\/DC distribution point keeps troubleshooting and service work more straightforward.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAC Digital Multi-Function Meter 8247\u003c\/li\u003e\n\u003cli\u003eDC Digital Multi-Function Meter 8248\u003c\/li\u003e\n\u003cli\u003e1 double-pole 30A AC main breaker\u003c\/li\u003e\n\u003cli\u003e6 single-pole 15A AC branch breakers\u003c\/li\u003e\n\u003cli\u003e1 single-pole 100A DC main breaker\u003c\/li\u003e\n\u003cli\u003e19 single-pole 15A DC branch breakers\u003c\/li\u003e\n\u003cli\u003eBasic AC label kit\u003c\/li\u003e\n\u003cli\u003eBasic DC label kit\u003c\/li\u003e\n\u003cli\u003ePanel insulating back covers\u003c\/li\u003e\n\u003cli\u003eInstallation instructions and cutout template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550519754998,"sku":"APL569634","price":2630.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322709_apl569634.webp?v=1787795896"},{"product_id":"apl747535","title":"Blue Sea Systems AMI\/MIDI Fuse Pair, 32V DC, Tin-Plated Copper Blades, Ignition Protected","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems MIDI\/AMI Fuse is a compact fast-acting fuse range for main or branch circuit protection on DC electrical systems. It covers amperage ratings from 30A to 200A, with a maximum voltage of 32V DC, making it a practical match for many 12V and 24V boat circuits where the fuse rating needs to match the cable size, load, and fuse block.\u003c\/p\u003e\u003cp\u003eThese fuses use tin-plated copper connector blades for corrosion resistance and include a visible blown-fuse indication, which helps during troubleshooting in battery compartments, distribution panels, console wiring, and other areas where quick inspection matters. The range is ignition protected when used with the Blue Sea Systems SafetyHub family of products, supporting SAE J1171 installations where fuel vapor safety is part of the electrical layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAMI\/MIDI fuse format for compact main or branch DC circuit protection.\u003c\/li\u003e\n\u003cli\u003eAvailable in amperage ratings from 30A through 200A to match different circuit protection requirements.\u003c\/li\u003e\n\u003cli\u003eMaximum voltage rating of 32V DC for common marine 12V and 24V electrical systems.\u003c\/li\u003e\n\u003cli\u003eInterrupt capacity rated at 5000A at 16V DC and 2000A at 32V DC.\u003c\/li\u003e\n\u003cli\u003eTin-plated copper CDA 110 connector blades help resist corrosion in marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003eVisible blown-fuse indication makes fault checks quicker without removing unnecessary parts.\u003c\/li\u003e\n\u003cli\u003eColor-coded amperage identification reduces confusion when multiple fuse ratings are kept on board.\u003c\/li\u003e\n\u003cli\u003eIgnition protected when used with Blue Sea Systems SafetyHub products for installations requiring SAE J1171 protection.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -40° C to 125° C for demanding onboard electrical environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fuse range varies by amperage rating, with options from 30A, 40A, 50A, 60A, 70A, 80A, 100A, 125A, 150A, 175A, and 200A. The correct rating should be selected as part of the full circuit design, taking the connected load, conductor size, fuse holder, and applicable marine electrical standards into account.\u003c\/p\u003e\u003cp\u003eAcross the range, the AMI\/MIDI format, 32V DC maximum voltage, tin-plated copper blade construction, visible blown-fuse indication, and package quantity remain consistent. The amperage rating is the key difference between configurations.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese fuses work with Blue Sea Systems SafetyHub products and the 7720 AMI\/MIDI Safety Fuse Block. The compact footprint suits battery distribution and protected accessory feeds where space is limited but high-current circuit protection is still needed.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm that the fuse rating, fuse block, cable gauge, terminal hardware, and available fault current are all appropriate for the circuit. The listed maximum torque is 40 in-lb, or 4.52 Nm, which is important for secure connections without over-tightening the hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis range is a good match for boat owners and installers building or servicing DC distribution systems for electronics, pumps, charging equipment, windlass feeds, thrusters, or other protected circuits within the fuse rating range. It is especially useful where spare fuses need to be easy to identify and inspect during a fault.\u003c\/p\u003e\u003cp\u003eKeep replacement fuses in the same amperage rating as the protected circuit. Replacing a blown fuse with a higher rating can leave wiring underprotected and should not be used as a shortcut for troubleshooting.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo AMI\/MIDI fuses in the selected amperage rating.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"150A","offer_id":51550536171766,"sku":"APL747535-V8","price":9.99,"currency_code":"USD","in_stock":true},{"title":"70A","offer_id":51550536204534,"sku":"APL747535-V6","price":9.99,"currency_code":"USD","in_stock":true},{"title":"50A","offer_id":51550536237302,"sku":"APL747535-V5","price":9.99,"currency_code":"USD","in_stock":true},{"title":"80A","offer_id":51550536270070,"sku":"APL747535-V3","price":9.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":51550536302838,"sku":"APL747535-V4","price":9.99,"currency_code":"USD","in_stock":false},{"title":"60A","offer_id":51550536335606,"sku":"APL747535-V0","price":9.99,"currency_code":"USD","in_stock":true},{"title":"100A","offer_id":51550536368374,"sku":"APL747535-V7","price":9.99,"currency_code":"USD","in_stock":true},{"title":"200A","offer_id":51550536401142,"sku":"APL747535-V20","price":9.99,"currency_code":"USD","in_stock":true},{"title":"125A","offer_id":51550536433910,"sku":"APL747535-V9","price":9.99,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":51550536466678,"sku":"APL747535-V1","price":9.99,"currency_code":"USD","in_stock":true},{"title":"175A","offer_id":51550536499446,"sku":"APL747535-V2","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370104_apl747535_jpeg.jpg?v=1787796268"},{"product_id":"apl652515","title":"Blue Sea Systems Analog DC Voltmeter, Backlit Meter Face","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Blue Sea Systems analog DC voltmeter is a backlit panel meter for monitoring DC battery and charging-system voltage on a boat. The range includes 8 to 16V DC models for 12V systems and an 18 to 32V DC model for 24V systems, with face sizes of 2 in or 2-3\/4 in depending on the configuration.\u003c\/p\u003e\u003cp\u003eThe analog dial gives a quick visual readout at the helm, electrical panel, nav station, or equipment panel without needing to wake up a multifunction display or digital battery monitor. The backlit face helps at night or in low light, and the backlight uses separate 12V or 24V DC connections so it can be tied into the vessel’s panel-lighting circuit.\u003c\/p\u003e\u003cp\u003eAcross the listed configurations, meter current is 1 mA at full scale, with backlighting current of 16 mA at 12V DC or 20 mA at 24V DC. That low draw makes the meter practical for continuous panel use while giving the operator a simple way to spot undercharging, overvoltage, or a battery bank that needs attention.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAnalog DC voltage display for checking battery and charging-system condition at a glance.\u003c\/li\u003e\n\u003cli\u003eAvailable in 8 to 16V DC and 18 to 32V DC ranges to match common 12V and 24V onboard electrical systems.\u003c\/li\u003e\n\u003cli\u003eBacklit meter face supports night operation and low-light panels.\u003c\/li\u003e\n\u003cli\u003eSeparate 12V or 24V DC backlight connections allow the illumination circuit to be managed apart from the meter reading.\u003c\/li\u003e\n\u003cli\u003eFace size options include 2 in and 2-3\/4 in to suit micro and standard panel layouts.\u003c\/li\u003e\n\u003cli\u003eMeter current of 1 mA at full scale keeps operating draw low for panel-mounted monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis voltmeter is offered in several configurations so the panel opening and voltage scale can be matched to the vessel’s electrical system.\u003c\/p\u003e\u003cp\u003eThe attributes that vary are face size and voltage range. The backlit face and low full-scale meter current are consistent across the listed configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8003: 2-3\/4 in face size with an 8 to 16V DC range. This configuration fits standard-size meter panels and suits 12V DC battery and charging-system monitoring.\u003c\/li\u003e\n\u003cli\u003e8028: 2 in face size with an 8 to 16V DC range. This micro-size version suits tighter panels where the system being monitored is 12V DC.\u003c\/li\u003e\n\u003cli\u003e8240: 2-3\/4 in face size with an 18 to 32V DC range. This configuration fits standard-size meter panels and suits 24V DC battery and charging-system monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor installation planning, match the voltage range to the battery bank or DC bus being monitored before selecting the meter. An 8 to 16V DC scale is appropriate for typical 12V circuits, while an 18 to 32V DC scale is appropriate for typical 24V circuits.\u003c\/p\u003e\u003cp\u003eThe backlight circuit should be planned along with the rest of the panel lighting so the meter illumination behaves the way the operator expects at night. The separate backlight connection also helps when refitting an older panel because the meter reading and lighting can be wired as distinct functions.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis meter is a good match for boats that need a simple voltage reference at the main DC panel, helm station, electronics panel, battery switch area, or nav station. It is especially useful where a quick analog readout is preferred for routine checks before starting the engine, while charging from an alternator, or while running DC loads at anchor.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"18–32V DC \/ 2-3\/4\"","offer_id":51550620975350,"sku":"APL652515-V3","price":57.99,"currency_code":"USD","in_stock":true},{"title":"8–16V DC \/ 2\"","offer_id":51550621008118,"sku":"APL652515-V2","price":57.99,"currency_code":"USD","in_stock":true},{"title":"8–16V DC \/ 2-3\/4\"","offer_id":51550621040886,"sku":"APL652515-V1","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328957_apl652515.webp?v=1787797039"},{"product_id":"apl122155","title":"Blue Sea Systems Short Stop Circuit Breaker Boot, IP64, Pre-Cut","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 7160 is a protective boot for Short Stop circuit breakers. It covers the breaker connection area with a pre-cut opening that lets wiring exit from different angles, which helps when the breaker is mounted in a tight panel, locker, or service space.\u003c\/p\u003e\u003cp\u003eThis boot meets ABYC insulation requirements and adds a cleaner, safer finish around the breaker terminals. It also helps reduce exposure to dust, splashing water, and accidental contact around the protected connection point. Weight is 0.06 lb (0.03 kg), so it adds very little bulk to the installation.\u003c\/p\u003e\u003cp\u003eIt is a sensible replacement when the original boot is missing, damaged, or worn from years of service. For boats that use Blue Sea Systems Short Stop breakers in semi-exposed areas, this small part helps keep the circuit protection setup properly covered without changing the breaker itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Blue Sea Systems Short Stop circuit breakers\u003c\/li\u003e\n\u003cli\u003ePre-cut design allows wire entry from any angle\u003c\/li\u003e\n\u003cli\u003eMeets ABYC insulation requirements\u003c\/li\u003e\n\u003cli\u003eHelps cover the breaker terminal area against dust, splashing water, and accidental contact\u003c\/li\u003e\n\u003cli\u003eLightweight accessory at 0.06 lb (0.03 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis boot is intended for the Short Stop breaker style, so fit should be checked against that breaker family rather than other push-button breaker types. It is used where you want to restore the original protective cover around the breaker connection area without replacing the breaker body.\u003c\/p\u003e\u003cp\u003eOn board, that matters most in places where the breaker is easy to bump during routine service or where wiring sits near lockers, consoles, and distribution points that are not fully sealed from everyday marine mess. It suits owners replacing a lost boot and installers finishing a cleaner DC protection layout on small craft, cruisers, fishing boats, and sailboats.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe pre-cut opening makes cable routing easier when the wire run does not approach the breaker from a straight line. That can save time in tight spaces where terminal clearance and wire bend matter as much as the breaker location itself.\u003c\/p\u003e\u003cp\u003eBecause this part is only the protective boot, it works as an accessory in the installation rather than as a circuit protection device. It is there to cover and insulate the breaker connection area once the breaker and wiring are already in place.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550658855158,"sku":"APL122155","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369550_apl122155_jpeg.jpg?v=1787797375"},{"product_id":"apl770441","title":"Blue Sea Systems Single Meter Mounting Panel, For 2-3\/4 in Analog or Digital Meters, Mounting Screws, Center Adjustment Hole Plug","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1475 is a mounting panel for a single standard 2-3\/4 inch analog or digital meter. It gives you a clean way to add one meter to a helm, electrical panel, or monitoring station without cutting a custom faceplate, and the panel itself measures 4.75 inches high by 4.88 inches wide.\u003c\/p\u003e\u003cp\u003eThis panel is a straightforward fit for boats that use one dedicated voltmeter, ammeter, or similar round gauge-style electrical monitor. It works well when you want the meter face mounted neatly on an existing flat surface and want the finished installation to look organized rather than improvised.\u003c\/p\u003e\u003cp\u003eBecause it accepts the common 2-3\/4 inch meter size used across many Blue Sea Systems analog and digital meters, it is a practical match when replacing an old panel insert or adding a new electrical readout to a DC or AC monitoring setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits one standard 2-3\/4 inch analog or digital meter\u003c\/li\u003e\n\u003cli\u003ePanel size is 4.75 inches by 4.88 inches for a compact single-meter layout\u003c\/li\u003e\n\u003cli\u003eIncludes mounting screws for installation\u003c\/li\u003e\n\u003cli\u003eIncludes a center adjustment hole plug for a cleaner finished face when needed\u003c\/li\u003e\n\u003cli\u003eWorks with a wide range of Blue Sea Systems analog meters and Blue Sea digital meters that use the 2-3\/4 inch format\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is intended for single-meter installations where the meter itself uses the standard 2-3\/4 inch face size. That makes it relevant for many common marine electrical monitoring jobs, such as adding a DC voltmeter near the switch panel, placing an ammeter in a machinery space control area, or creating a small dedicated meter position at the nav station.\u003c\/p\u003e\u003cp\u003eBefore ordering, the key check is meter face size rather than system voltage. The panel is a mounting piece, so fit is determined by the meter diameter and the available flat mounting surface on the boat.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn board, this panel suits refit work and new installations where you want one meter mounted cleanly without fabricating a custom surround. The included screws help speed up the install, and the center adjustment hole plug is useful when you want the panel face to stay tidy after the meter is in place.\u003c\/p\u003e\u003cp\u003eThis is a good match for boat owners, installers, and yard teams building out a simple monitoring point for battery voltage, charge and discharge current, or AC system readings where a single dedicated meter is easier to read at a glance.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle meter mounting panel\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eCenter adjustment hole plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550663311606,"sku":"APL770441","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369342_apl770441_jpeg.jpg?v=1787797464"},{"product_id":"apl549332","title":"Blue Sea Systems PowerPost Terminal Stud, 48V DC, Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems PowerPost is an insulated single-stud terminal point for joining multiple high-amperage DC conductors in a clean, serviceable location. It gives battery cables, inverter feeds, windlass cables, charger leads, and other larger DC runs a secure common connection point without needing the footprint of a full bus bar.\u003c\/p\u003e\u003cp\u003eEach PowerPost uses a stainless steel terminal stud on an insulated red base rated for up to 48V DC. The reinforced thermoplastic base is listed as PBT UL94 V0, giving the post a practical housing for marine electrical spaces where vibration, heat, and tight mounting locations are part of the job.\u003c\/p\u003e\u003cp\u003eThis single-stud format is useful on boats where cable routing needs to stay organized behind a panel, near a battery bank, inside an equipment locker, or close to a high-load accessory. Select the stud size that matches the ring terminals and cable stack used in the system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInsulated single stainless steel stud gives multiple large conductors one secure termination point.\u003c\/li\u003e\n\u003cli\u003eRated for DC systems up to 48V, covering common 12V, 24V, and 48V marine DC installations.\u003c\/li\u003e\n\u003cli\u003eReinforced thermoplastic base with PBT UL94 V0 material rating supports use in demanding electrical compartments.\u003c\/li\u003e\n\u003cli\u003eSingle-post layout helps keep high-amperage cable runs tidy where space is limited and a full bus bar is not needed.\u003c\/li\u003e\n\u003cli\u003eMultiple stud sizes are available to match common marine ring-terminal hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe PowerPost is offered in several stud configurations so it can be matched to the ring terminals, cable lug hardware, and available mounting space in the boat’s DC system.\u003c\/p\u003e\u003cp\u003eThe stud thread and stud length vary by configuration. The insulated single-stud function, 48V DC maximum rating, stainless steel stud construction, and reinforced thermoplastic base are consistent across the listed PowerPost and Mini PowerPost options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2001: 1\/4\"-20 stud size with 1-1\/16\" stud length. This size suits installations using 1\/4\" ring terminals where a longer stud is useful for a modest stack of properly sized conductors.\u003c\/li\u003e\n\u003cli\u003e2002: 5\/16\"-18 stud size with 7\/8\" stud length. The larger 5\/16\" thread works with heavier lugs often used on higher-current DC cable runs.\u003c\/li\u003e\n\u003cli\u003e2003: 3\/8\"-16 stud size with 7\/8\" stud length. This is the largest listed stud size and fits systems using 3\/8\" ring terminals on large battery or equipment cables.\u003c\/li\u003e\n\u003cli\u003e2010: #10-32 stud size with 5\/8\" stud length. This Mini PowerPost option fits smaller ring terminals and compact DC connection points.\u003c\/li\u003e\n\u003cli\u003e2011: 1\/4\"-20 stud size with 3\/4\" stud length. This Mini PowerPost option keeps the common 1\/4\" thread in a shorter format for tighter mounting areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the PowerPost on a stable surface close to the cable group it will serve, with enough clearance to install the ring terminals flat on the stud and protect the connection from accidental contact. It should be positioned so cables are supported and not pulling on the stud, especially on boats where vibration and hull movement can work against loose or strained wiring.\u003c\/p\u003e\u003cp\u003eUse ring terminals that match the selected stud size and the cable gauge in the circuit. Keep the stack clean, flat, and serviceable, and follow accepted marine wiring practice for the number of terminals placed on one stud. For 1\/4\"-20 versions with a listed torque value, the recommended torque is 70 in-lb.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis terminal post is a good fit for owners, installers, and refit projects that need a neat junction point for high-current DC wiring without adding a larger distribution block. Common applications include battery cable takeoffs, charger or inverter connections, windlass and thruster control feeds, and other locations where several heavy conductors need to meet at one protected point.\u003c\/p\u003e\u003cp\u003eIt is also helpful during system upgrades, where an older cable stack needs to be moved off a battery post and onto a dedicated termination point that is easier to inspect and maintain.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"3\/8\"-16 x 7\/8\"","offer_id":51550744936694,"sku":"APL549332-V20","price":17.99,"currency_code":"USD","in_stock":true},{"title":"1\/4\"-20 x 3\/4\"","offer_id":51550744969462,"sku":"APL549332-V8","price":11.99,"currency_code":"USD","in_stock":true},{"title":"5\/16\"-18 x 7\/8\"","offer_id":51550745002230,"sku":"APL549332-V18","price":17.99,"currency_code":"USD","in_stock":true},{"title":"#10-32 x 5\/8\"","offer_id":51550745034998,"sku":"APL549332-V7","price":11.99,"currency_code":"USD","in_stock":true},{"title":"1\/4\"-20 x 1-1\/16\"","offer_id":51550745067766,"sku":"APL549332-V4","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325021_apl549332.webp?v=1787800232"},{"product_id":"apl627020","title":"Blue Sea Systems Battery Terminal Mount BusBars, 100A, 32V, Tin-Plated Copper","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2340 is a battery terminal mount busbar set that adds positive and negative connection points directly at a threaded-post battery terminal. It is rated for 32V DC and 100A continuous, so it fits many 12V and 24V boat electrical systems where a few branch circuits need a clean connection point at the battery.\u003c\/p\u003e\u003cp\u003eThe bus material is tin-plated C11000 copper, and the mounting hole clears a 3\/8 in. [M10] stud. Each screw terminal uses a #8-32 screw with a captive star lock washer, and the insulated covers meet ABYC\/USCG insulation requirements.\u003c\/p\u003e\u003cp\u003eThis style of busbar is useful when you want to tidy up battery connections instead of stacking several small ring terminals on one post. It makes sense in battery boxes, console compartments, and other tight spaces where service access matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdds both positive and negative busbars directly at a threaded-post battery terminal\u003c\/li\u003e\n\u003cli\u003e32V DC maximum voltage and 100A continuous rating for many 12V and 24V DC installations\u003c\/li\u003e\n\u003cli\u003eTin-plated C11000 copper bus material for strong conductivity and better resistance to corrosion in marine electrical spaces\u003c\/li\u003e\n\u003cli\u003e3\/8 in. [M10] mounting hole fits common threaded battery studs\u003c\/li\u003e\n\u003cli\u003e#8-32 screw terminals with captive star lock washers help hold smaller branch-circuit connections in place where vibration is part of normal use\u003c\/li\u003e\n\u003cli\u003eInsulated covers meet ABYC\/USCG insulation requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis set mounts right on the battery stud, so accessory feeds can stay close to the source instead of running first to a separate bus location. That can simplify short battery-area wiring runs and leave the main battery cable connection less crowded.\u003c\/p\u003e\u003cp\u003eIt is best used where several lower-current circuits need organized takeoffs from the battery and where those circuits already have their own protection in the line. For boats with limited room around the battery, that can make troubleshooting and seasonal service easier.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on the battery terminal style first. This model needs a threaded-post battery with clearance for a 3\/8 in. [M10] stud, and it is intended for DC systems up to 32V. The 100A continuous rating sets the load limit, so it is better matched to grouped branch circuits than to one heavy feed.\u003c\/p\u003e\u003cp\u003eIt suits owners who want a cleaner battery connection point for small onboard electrical circuits without moving to a larger remote busbar. That can be a practical upgrade on center consoles, trailer boats, sailboats, and small cruisers where battery access is tight and wiring needs to stay organized.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne black negative busbar\u003c\/li\u003e\n\u003cli\u003eOne red positive busbar\u003c\/li\u003e\n\u003cli\u003eFour 16-14 AWG nylon insulated ring terminals\u003c\/li\u003e\n\u003cli\u003eFour 12-10 AWG nylon insulated ring terminals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550767120630,"sku":"APL627020","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369470_apl627020_jpeg.jpg?v=1787800681"},{"product_id":"apl104212","title":"Blue Sea Systems A-Series Double Blank Mounting Panel, For Double Pole Toggle Circuit Breakers, 1\/8 in 5052 Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8173 is an A-Series double blank mounting panel for A-Series double pole toggle circuit breakers. It is made from 1\/8\" aluminum 5052 alloy and measures 2.63\" wide by 3.75\" high, giving you a compact mounting point that fits this breaker format without looking out of place on a marine electrical panel.\u003c\/p\u003e\u003cp\u003eThe slate gray finish matches standard Blue Sea panel color, and the face accepts Blue Sea Systems large format panel labels so circuit identification stays clear and easy to read. This matters on boats where a breaker panel may be checked quickly underway, at the dock, or during service work.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for A-Series double pole toggle circuit breakers, so the panel opening matches this breaker style rather than a general switch cutout.\u003c\/li\u003e\n\u003cli\u003e1\/8\" aluminum 5052 alloy gives the breaker a rigid mounting surface suited to marine panel work.\u003c\/li\u003e\n\u003cli\u003eSlate gray finish blends with standard Blue Sea panel color for a consistent panel face.\u003c\/li\u003e\n\u003cli\u003eAccepts Blue Sea Systems large format panel labels for straightforward circuit marking.\u003c\/li\u003e\n\u003cli\u003eCompact 2.63\" x 3.75\" face size helps when panel space is limited.\u003c\/li\u003e\n\u003cli\u003ePanel layout accepts Blue Sea Systems LED indicators used for functions such as power on or reverse polarity indication.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is intended for installations that use the A-Series double pole toggle breaker footprint. It makes the most sense when the rest of the electrical system already uses Blue Sea A-Series toggle breakers and matching labels. It is not a universal trim plate for unrelated breaker or switch openings.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor refits and service work, this panel gives you a neat faceplate for mounting a breaker on a vertical surface where a clean breaker presentation matters. Before cutting or replacing a panel section, check the available face space against the 2.63\" by 3.75\" dimensions and leave room for labels and any indicator lights used in the panel layout.\u003c\/p\u003e\u003cp\u003eThis is a practical choice for boats that need an added breaker position or a replacement mounting panel that keeps the electrical panel easy to read and easy to service.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550817812726,"sku":"APL104212","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322655_apl104212.webp?v=1787801843"},{"product_id":"apl733645","title":"Blue Sea Systems 360 AC Branch Circuit Breaker Panel, 120V AC, 8 Positions, 100A, Flat Rocker","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1228 is a 120V AC branch circuit breaker panel with eight positions for distributing onboard AC power to individual circuits. It is built in the 360 Panel System format and comes with eight single-pole 15A breakers, a 100A maximum panel rating, and a compact footprint that measures 7.75 in high, 4.88 in wide, and 3.00 in deep.\u003c\/p\u003e\u003cp\u003eAll circuit label positions are backlit, and each position has an ON indicator LED, so circuit status is easier to read in a cabin, nav station, or interior electrical space. This is a branch panel rather than a combined main and branch panel, which matters if your boat already has a separate AC main breaker or source-selection section.\u003c\/p\u003e\u003cp\u003eIt also arrives with hot, neutral, and safety ground buses already installed and pre-wired. That makes it a practical choice for new AC distribution work or for replacing an older panel where clean branch-circuit organization matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight 120V AC branch circuit positions with included single-pole 15A breakers\u003c\/li\u003e\n\u003cli\u003e100A maximum panel amperage for properly sized AC distribution systems\u003c\/li\u003e\n\u003cli\u003eBacklit label windows and ON indicator LEDs at every circuit position\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus bars for conductivity and better resistance to corrosion in marine electrical spaces\u003c\/li\u003e\n\u003cli\u003e360 Panel System format supports modular panel layouts and future expansion\u003c\/li\u003e\n\u003cli\u003eCompact panel size for installations where space behind the face is limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is an interior branch panel, so it belongs in a protected mounting location where the face stays accessible for switching, labeling, and routine checks. The included cutout template helps when you are fitting it into a new panel board or replacing a panel in an existing AC distribution area.\u003c\/p\u003e\u003cp\u003eBecause it uses the 360 Panel System format, it works well in custom panel layouts where the AC branch section sits alongside other control or source modules. On board, eight branch positions are enough for many common 120V AC loads, provided the circuit design, conductor sizing, and upstream protection match the vessel's electrical plan.\u003c\/p\u003e\u003ch6\u003eElectrical configuration\u003c\/h6\u003e\u003cp\u003eThis panel is set up for 120V AC service and ships with eight flat rocker 15A breakers already fitted. The 100A panel rating gives room for multiple branch circuits, but the final allowable load still depends on using wire and overcurrent protection sized correctly for the installation.\u003c\/p\u003e\u003cp\u003eFor refits, this panel is a good match when the boat already has a separate AC main breaker arrangement and the job here is to split incoming AC power into clearly labeled branch circuits. For new builds, it suits builders and owners who want a compact AC branch section with the internal buses already in place.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight A-Series flat rocker single-pole 15A circuit breakers\u003c\/li\u003e\n\u003cli\u003eBasic AC label kit with 30 black square labels\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eCutout template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550820630774,"sku":"APL733645","price":660.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369237_apl733645_jpeg.jpg?v=1787801932"},{"product_id":"apl735018","title":"Blue Sea Systems Standard CableCap Battery Terminal Caps, For Marine Adapter Terminals, PVC, Red\/Black Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Standard CableCap is a PVC battery terminal cover pair for insulating battery terminals that have marine adapter terminals installed. It is supplied as a red and black pair, so positive and negative battery connections stay easy to identify during service, troubleshooting, and battery replacement.\u003c\/p\u003e\u003cp\u003eThis product family covers common battery cable sizes used on boats, with the small version fitting cable sizes 4, 2, and 1, and the large version fitting cable sizes 1\/0 and 2\/0. The caps help reduce exposed metal at the battery connection, which matters in lockers, consoles, engine spaces, and other areas where tools, gear, or nearby conductors may come close to the terminals.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePVC construction for use as a battery terminal insulating cover.\u003c\/li\u003e\n\u003cli\u003eRed and black pair supports clear positive and negative battery terminal identification.\u003c\/li\u003e\n\u003cli\u003eMade for batteries with marine adapter terminals added on.\u003c\/li\u003e\n\u003cli\u003eSmall size supports cable sizes 4, 2, and 1.\u003c\/li\u003e\n\u003cli\u003eLarge size supports cable sizes 1\/0 and 2\/0.\u003c\/li\u003e\n\u003cli\u003eHelps cover exposed terminal hardware in battery compartments, helm consoles, and service areas where accidental contact is a concern.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Standard CableCap is offered in two size configurations for different battery cable installations.\u003c\/p\u003e\u003cp\u003eBoth variants are red and black PVC pairs for batteries with marine adapter terminals added on. The difference is the cable size range each cap is made to fit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4005: Small. Fits cable sizes 4, 2, and 1, making it suited to smaller battery cable runs and accessory battery connections that use those conductor sizes.\u003c\/li\u003e\n\u003cli\u003e4006: Large. Fits cable sizes 1\/0 and 2\/0, giving more room for larger battery cables used on higher-current DC circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMatch the cap size to the battery cable, terminal hardware, and adapter terminal arrangement before installation. The cap should sit over the terminal connection without being forced, pinched, or cut around the cable entry.\u003c\/p\u003e\u003cp\u003eOn boats with multiple batteries, color-coded terminal covers also make routine checks faster. They help crew or service technicians confirm polarity at a glance before disconnecting chargers, battery switches, inverter cables, or DC distribution feeds.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis CableCap is a practical fit for battery boxes, engine room battery banks, center console battery compartments, sailboat house banks, and small craft starting batteries where marine adapter terminals are installed. It is especially useful when added ring terminals or adapter hardware leave more of the connection exposed than a basic automotive-style post cover would cover.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the caps during battery service for cracking, deformation, or looseness, especially in compartments exposed to heat, vibration, or frequent battery work. Replace any cap that no longer covers the terminal cleanly, since the value of the part comes from keeping the connection covered and easy to identify.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne red Standard CableCap\u003c\/li\u003e\n\u003cli\u003eOne black Standard CableCap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Small","offer_id":51550829052150,"sku":"APL735018-V0","price":7.99,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":51550829084918,"sku":"APL735018-V5","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369987_apl735018_jpeg.jpg?v=1787802108"},{"product_id":"apl865620","title":"Blue Sea Systems AGC Fuse Kit, 41-Piece, 32V DC, Heavy Duty In-Line Fuse Holder","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 5289 is a 41-piece AGC fuse kit for DC circuits up to 32V. It includes 40 AGC glass fuses in eight amperage ratings from 1A to 30A, plus a heavy-duty in-line AGC\/MDL fuse holder, so you have a useful spread of common replacements in one pack.\u003c\/p\u003e\u003cp\u003eThis kit suits boats that use AGC or MDL glass fuses for smaller accessory and electronics circuits. It gives you four fuses each in 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, and 30A, which helps when you are tracing a fault, replacing a blown fuse at the dock, or keeping spare protection on board for routine electrical work.\u003c\/p\u003e\u003cp\u003eThe AGC\/MDL format works with ST Glass fuse blocks and AGC\/MDL fuse holders. For a boat owner or technician trying to keep an older glass-fuse setup supported, this kit keeps the common ratings together with a matching in-line holder instead of piecing them together one by one.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e41-piece kit with 40 AGC glass fuses and 1 heavy-duty in-line AGC\/MDL fuse holder\u003c\/li\u003e\n\u003cli\u003eEight common ratings included: 1A, 2A, 3A, 5A, 7.5A, 10A, 15A, and 30A\u003c\/li\u003e\n\u003cli\u003eFour fuses of each amperage, which is useful for spare stock and repeat replacements during troubleshooting\u003c\/li\u003e\n\u003cli\u003e32V DC rating for low-voltage DC circuits used on many 12V and 24V boats\u003c\/li\u003e\n\u003cli\u003eAGC\/MDL glass fuse format for systems that use ST Glass fuse blocks or AGC\/MDL holders\u003c\/li\u003e\n\u003cli\u003eGlass-body fuse style makes the blown element easy to inspect during service checks\u003c\/li\u003e\n\u003cli\u003eResealable pack keeps assorted fuse values together in one place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is for circuits that already use AGC or MDL glass tube fuses. It is not the right match for blade-style fuse panels or larger fuse types such as MIDI, ANL, or Class T, so it is worth checking the fuse holder or fuse block on the boat before ordering.\u003c\/p\u003e\u003cp\u003eThe included holder gives you an in-line option for repairs or small circuit additions where AGC or MDL protection is the correct format. That can be useful for accessory feeds, older electronics circuits, and other low-voltage runs that still rely on glass fuses.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eWhen replacing a fuse, match the amperage to the circuit requirement and the existing protection scheme rather than moving to a higher value. If a fuse opens more than once, the problem is usually elsewhere in the circuit, so the load, wiring, and holder should be checked before another fuse goes in.\u003c\/p\u003e\u003cp\u003eThis assortment makes sense for owners who keep spare electrical consumables on board, as well as yards and technicians who service boats with AGC fuse blocks and holders. It is especially useful where a quick replacement can get a small circuit back online without hunting for individual fuse values.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 x 1A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 2A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 3A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 5A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 7.5A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 10A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 15A AGC fuses\u003c\/li\u003e\n\u003cli\u003e4 x 30A AGC fuses\u003c\/li\u003e\n\u003cli\u003e1 x Heavy Duty In-Line AGC\/MDL Fuse Holder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550871847158,"sku":"APL865620","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369535_apl865620_jpeg.jpg?v=1787803126"},{"product_id":"apl251737","title":"Blue Sea Systems Common BusBar Cover, For 2302 Common 150A BusBar, 20 Gang","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2716 is a busbar cover made for the Blue Sea Systems 2302 Common 150A BusBar with a 20-gang layout. It snaps onto the terminal studs and adds insulation over the connection area while keeping wire access open, which helps reduce accidental contact around exposed distribution points.\u003c\/p\u003e\u003cp\u003eThis is a fit-specific part rather than a universal cover, so the underlying busbar part number matters. It is a straightforward match when you are using the 2302 as a common point for positive distribution or for negative or AC ground collection on a boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Blue Sea Systems busbar PN 2302\u003c\/li\u003e\n\u003cli\u003eMatches the 20-gang Common 150A BusBar layout\u003c\/li\u003e\n\u003cli\u003eSnap-on attachment to the terminal studs\u003c\/li\u003e\n\u003cli\u003eHelps insulate exposed connections and reduce accidental contact\u003c\/li\u003e\n\u003cli\u003eKeeps access open for wire routing and service checks\u003c\/li\u003e\n\u003cli\u003ePolycarbonate cover construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is intended for the Blue Sea Systems 2302 busbar, so it is best used when you need a clean, matched cover for that exact distribution block. On a boat with several branch circuits landing on one common bus, that fit matters because the cover needs to clear the stud locations and terminal layout without interfering with normal cable runs.\u003c\/p\u003e\u003cp\u003eIt suits owners, electricians, and refit installers who are building or tidying a distribution point under a helm, inside an electrical locker, or near a battery bank and want the terminals covered without changing the busbar itself.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe cover presses onto the busbar studs after the 2302 busbar has been installed and wired. Once in place, it leaves the wire entry area accessible, which is useful when the busbar remains part of a serviceable panel or distribution area that needs periodic inspection.\u003c\/p\u003e\u003cp\u003eFor retrofit work, this part also helps when an older 2302 installation is still in good condition but the exposed connection area needs better insulation and a neater finished look.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550890590454,"sku":"APL251737","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369480_apl251737_jpeg.jpg?v=1787803707"},{"product_id":"apl437212","title":"Blue Sea Systems Traditional Metal AC Main Source Selector Panel, Lockout Slide, Reverse Polarity LED","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Traditional Metal AC Main Source Selector Panel is an AC distribution panel family for boats that need safe selection between two AC power sources and branch circuit control from one organized panel.\u003c\/p\u003e\u003cp\u003eThese panels are available for 120V AC and 230V AC systems, with configurations for 2 sources plus either 4 or 9 branch positions. Depending on the variant, the panel is arranged in a horizontal or vertical format, and selected models include an AC voltmeter for quick source voltage checks at the panel.\u003c\/p\u003e\u003cp\u003eEach panel uses double-pole AC main circuit breakers with an installed lockout slide, helping prevent both AC sources from being connected at the same time. Hot, neutral, and safety ground buses are installed and pre-wired, which makes the panel a practical choice for refits, panel upgrades, or replacing an older AC distribution layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAC source selector layout for two onboard AC sources, commonly used for shore power and generator or inverter-fed AC systems.\u003c\/li\u003e\n\u003cli\u003eLockout slide between the main breakers helps prevent simultaneous connection of both AC sources.\u003c\/li\u003e\n\u003cli\u003eAvailable in 120V AC and 230V AC configurations to match the vessel electrical system.\u003c\/li\u003e\n\u003cli\u003eBranch circuit options include 4-position and 9-position layouts for smaller or more expanded AC panels.\u003c\/li\u003e\n\u003cli\u003eHorizontal and vertical formats support different helm, cabin, or electrical panel spaces.\u003c\/li\u003e\n\u003cli\u003eRed reverse-polarity indicating LED gives a clear warning when AC input polarity needs attention.\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions and ON indicating LEDs make circuit status easier to read in low-light cabins and electrical compartments.\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired to reduce panel wiring work during installation.\u003c\/li\u003e\n\u003cli\u003eTraditional metal panel construction suits full replacements and extensions to existing Blue Sea Systems style AC panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis panel range varies by nominal voltage, number of branch circuit positions, panel orientation, and meter configuration. The 120V AC variants are built around 30A double-pole main breakers and 15A single-pole branch breakers, while the 230V AC variants use 16A double-pole main breakers and 8A single-pole branch breakers.\u003c\/p\u003e\u003cp\u003eThe 9-position versions give more room for AC loads such as outlets, battery chargers, water heaters, and onboard appliances. The 4-position versions keep the panel smaller for boats with fewer AC circuits or limited mounting space. Horizontal models suit wider panel openings, while vertical models fit narrower spaces where height is available.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore installation, match the panel voltage to the vessel AC system and confirm that the source arrangement, breaker ratings, and number of branch circuits suit the boat’s wiring plan. AC panels should be installed where the main source breakers are easy to reach and where the reverse-polarity and ON indicators are visible during normal operation.\u003c\/p\u003e\u003cp\u003eThe pre-wired bus structure helps simplify the job, but final wiring still needs correct conductor sizing, overcurrent protection, grounding, strain relief, and source labeling. AC shore power and onboard AC distribution work should follow applicable marine electrical standards and be completed by a qualified marine electrician when required.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe available formats cover 120V AC and 230V AC boats with two selectable AC sources. The range includes panels for 2 sources plus 9 positions in both horizontal and vertical layouts, along with smaller 2 sources plus 4 positions layouts for more compact installations.\u003c\/p\u003e\u003cp\u003eFor refit work, check the panel cutout, overall panel dimensions, depth behind the mounting surface, and the direction of wire entry before ordering. These panels are often used when replacing an older AC panel or extending an existing traditional metal panel layout while keeping the circuit controls grouped in a familiar toggle-breaker format.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis panel family is a good match for cruising boats, sportfishing boats, and sailboats that need to switch safely between two AC sources while keeping branch circuits clearly separated. It is especially useful where the owner wants a physical lockout at the source selector, visible circuit status, and a panel style that fits a traditional marine electrical layout.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Horizontal (Voltmeter) \/ 120V AC \/ 2 Sources + 9 Positions","offer_id":51550898520310,"sku":"APL437212-V1","price":973.99,"currency_code":"USD","in_stock":false},{"title":"Vertical (No Meter) \/ 120V AC \/ 2 Sources + 4 Positions","offer_id":51550898553078,"sku":"APL437212-V3","price":517.99,"currency_code":"USD","in_stock":false},{"title":"Vertical (No Meter) \/ 230V AC \/ 2 Sources + 9 Positions","offer_id":51550898585846,"sku":"APL437212-V5","price":832.99,"currency_code":"USD","in_stock":false},{"title":"Vertical (No Meter) \/ 120V AC \/ 2 Sources + 9 Positions","offer_id":51550898618614,"sku":"APL437212-V2","price":832.99,"currency_code":"USD","in_stock":false},{"title":"Horizontal (Voltmeter) \/ 230V AC \/ 2 Sources + 9 Positions","offer_id":51550898651382,"sku":"APL437212-V4","price":1004.99,"currency_code":"USD","in_stock":false},{"title":"Horizontal (No Meter) \/ 230V AC \/ 2 Sources + 4 Positions","offer_id":51550898684150,"sku":"APL437212-V6","price":534.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325005_apl437212.webp?v=1787803853"},{"product_id":"apl310778","title":"Blue Sea Systems C-Series White Toggle Circuit Breaker, Triple Pole, Magnetic Hydraulic Trip Free, 65V DC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems C-Series White Toggle Circuit Breaker is a triple pole magnetic hydraulic breaker for high-current marine circuits that need both overcurrent protection and manual switching in one panel-mounted unit. This white toggle version is available in 250A and 300A DC ratings, with three poles, trip-free operation, and a maximum rating of 120V AC, 240V AC, or 65V DC.\u003c\/p\u003e\u003cp\u003eIt is suited to heavy onboard loads such as inverters, bow thrusters, and windlasses, where a resettable breaker can simplify service compared with fuse-only protection. The breaker uses 1\/4-20 tin-plated brass terminal studs and has a 5000A interrupt capacity at 65V DC, which are important checks when matching it to battery banks, cable size, and available fault current.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTriple pole C-Series breaker with a white toggle actuator for marine electrical panels.\u003c\/li\u003e\n\u003cli\u003eAvailable in 250A DC and 300A DC versions for high-current circuit protection.\u003c\/li\u003e\n\u003cli\u003eMagnetic hydraulic trip-free mechanism cannot be held closed after a fault trip.\u003c\/li\u003e\n\u003cli\u003eCombines switching and circuit protection in one device, reducing the need for a separate switch in many installations.\u003c\/li\u003e\n\u003cli\u003eRated for 120V AC, 240V AC, and 65V DC systems when installed within the breaker specifications.\u003c\/li\u003e\n\u003cli\u003e5000A interrupt capacity at 65V DC for use in properly engineered DC distribution systems.\u003c\/li\u003e\n\u003cli\u003e1\/4-20 tin-plated brass terminal studs with 35 in-lb terminal stud torque.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -40 C to 85 C for engine spaces, equipment lockers, and exposed electrical compartments with suitable panel protection.\u003c\/li\u003e\n\u003cli\u003eDouble and triple pole C-Series breakers trip all poles when any one pole trips.\u003c\/li\u003e\n\u003cli\u003eRated for 10000 switching cycles, supporting regular manual operation as part of system control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two amperage configurations. Both are triple pole white toggle C-Series circuit breakers intended for high-current marine electrical circuits.\u003c\/p\u003e\u003cp\u003eThe amperage rating changes between variants. The general construction and core specifications remain consistent across these two versions, including the toggle actuator, three-pole layout, trip-free magnetic hydraulic breaker type, 1\/4-20 tin-plated brass terminal studs, and 5000A interrupt capacity at 65V DC.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7270, 250A. This version fits installations where the protected circuit is specified for a 250A breaker, commonly around large DC loads such as inverter, thruster, or windlass feeds.\u003c\/li\u003e\n\u003cli\u003e7271, 300A. This version is the higher-amperage option in this pair and fits circuits engineered around a 300A breaker rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis breaker should be matched to the vessel wiring plan, conductor ampacity, expected load, battery source, and available short-circuit current. The 65V DC maximum makes it appropriate for common low-voltage DC boat systems when the complete installation stays within the breaker rating, while the 120V AC and 240V AC ratings allow use in AC panel applications where the circuit design calls for this breaker type.\u003c\/p\u003e\u003cp\u003eFor AC main use, a triple pole breaker can switch both hot lines and neutral in a 120\/240V system when that layout is required by the panel design. For DC use, the paralleled-pole configuration uses a 5\/16 inch stud on the bus side, so the panel, bus work, and cable terminations should be planned around the breaker geometry before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the breaker where the toggle is easy to reach and the terminals are protected from loose gear, spray, and accidental contact. Use the specified #6-32 stainless steel mounting screws and tighten them to 6 in-lb, then torque the terminal studs to 35 in-lb after the correct lugs and cable routing are in place.\u003c\/p\u003e\u003cp\u003eBecause this is a high-current breaker, cable size, lug quality, strain relief, and clean contact surfaces matter. It belongs in a properly enclosed marine electrical panel or distribution assembly, with enough clearance for service and enough labeling for quick identification during a fault or shutdown.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis breaker is a practical match for boats with large intermittent or continuous loads, including cruising boats with inverter systems, fishing boats with windlasses, and vessels using bow thrusters for close-quarters handling. It gives the operator a clear manual switch point while still opening the circuit during an overcurrent condition.\u003c\/p\u003e\u003cp\u003eIt is also useful where a skipper or technician wants a resettable protection device at the panel instead of relying only on a fuse located near the battery or equipment feed. The breaker rating still needs to follow the vessel electrical design, not just the size of the equipment it serves.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"250A","offer_id":51550910808310,"sku":"APL310778-V1","price":246.99,"currency_code":"USD","in_stock":true},{"title":"300A","offer_id":51550910841078,"sku":"APL310778-V2","price":246.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328697_apl310778.webp?v=1787804220"},{"product_id":"apl717306","title":"Blue Sea Systems In-Line ATO\/ATC Fuse Holder, 12 AWG Pigtails, 30A Max","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 5064 is an in-line fuse holder for ATO and ATC blade fuses in DC circuits up to 32V, with a 30A maximum fuse rating and pre-attached 12 AWG pigtails.\u003c\/p\u003e\u003cp\u003eIt gives you a straightforward way to add overcurrent protection to a single circuit without using a larger fuse block. On a boat, that is useful when you are protecting an accessory feed for electronics, lighting, pumps, or other small DC loads where an in-line connection makes more sense than a panel-mounted holder.\u003c\/p\u003e\u003cp\u003eThe fuse is sold separately, so the final circuit protection can be matched to the wire size and the load you are protecting. That makes this holder a practical replacement part as well as a simple choice for new 12V or 24V installs.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts standard ATO and ATC blade fuses\u003c\/li\u003e\n\u003cli\u003e30A maximum fuse amperage\u003c\/li\u003e\n\u003cli\u003eRated for DC systems up to 32V, which suits both 12V and 24V marine electrical setups\u003c\/li\u003e\n\u003cli\u003eComes with 12 AWG pigtails already attached for direct splicing into the circuit\u003c\/li\u003e\n\u003cli\u003eFuse is not included, so the circuit can be matched with the correct amperage for the application\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis holder is made for one in-line ATO or ATC fuse and works where you want protection in the wire run itself instead of at a fuse panel. It fits marine DC systems that use common automotive-style blade fuses and need a holder rated up to 30A.\u003c\/p\u003e\u003cp\u003eBefore installing, confirm the chosen fuse value matches the circuit requirements and the conductor size used on the boat. The 12 AWG leads make it a good fit for many accessory circuits, but the final fuse choice should always follow the needs of the load and the rest of the wiring in that run.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe pre-wired pigtails keep installation simple when you are replacing a damaged holder or adding protection to a new circuit. On most boat DC systems, an in-line fuse holder like this is installed on the positive feed and placed as close to the power source as the circuit layout allows.\u003c\/p\u003e\u003cp\u003eBecause this is an open in-line holder rather than a sealed waterproof style, it makes the most sense in a protected mounting area such as behind the helm, inside a console, under a dash, or in a cabin electrical space where it is not exposed to direct spray.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners, installers, and yards that need a simple holder for branch-circuit protection without stepping up to a larger distribution block. It works well in protected spaces on center consoles, cruisers, sailboats, and utility boats where accessory wiring needs a clean and serviceable fuse point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550913429750,"sku":"APL717306","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369525_apl717306_jpeg.jpg?v=1787804281"},{"product_id":"apl674915","title":"Blue Sea Systems ELCI Main 30A Double Pole Panel, 120V AC, 30 mA","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1502 is a 120V AC main shore power panel with a 30A double-pole ELCI breaker for whole-boat protection at the shore power connection. It has one panel position, a 30 mA leakage trip threshold, and front-panel indicators for reverse polarity and circuit status.\u003c\/p\u003e\u003cp\u003eThis panel is built for boats that use a single 30A, 120V shore power service and need ELCI protection at the main AC entry point. The backlit label area helps when the panel is mounted in a cabin, electrical locker, or helm space where light is limited, and the compact 4.75 in x 4.88 in x 3.00 in footprint makes it easier to place in tighter installations.\u003c\/p\u003e\u003cp\u003eIt includes the A-Series 3102100 double-pole 30A ELCI main breaker and is intended for installations that follow ABYC E-11 practices for shore power protection. Before ordering, confirm that your boat is wired for 120V AC shore power and that this location only needs a main ELCI panel rather than a branch distribution panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30A double-pole ELCI main breaker with a 30 mA leakage trip setting for whole-boat shore power protection\u003c\/li\u003e\n\u003cli\u003e120V AC, single-position panel for a dedicated AC main connection\u003c\/li\u003e\n\u003cli\u003eReverse polarity LED on the panel face for a quick visual check after hookup\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label position with ON-indicator LEDs that stay readable in low light\u003c\/li\u003e\n\u003cli\u003eCompact panel size: 4.75 in high, 4.88 in wide, and 3.00 in deep\u003c\/li\u003e\n\u003cli\u003eIncludes the A-Series 3102100 ELCI Main Circuit Breaker, double pole, 120V AC, 30A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis panel fits applications where the boat has a single 30A, 120V shore inlet and the main protection needs to be kept in a small area near the AC entry point. It works well in refit jobs where the goal is to add ELCI protection without moving to a larger multi-circuit panel.\u003c\/p\u003e\u003cp\u003eBecause this is a one-position main panel, it is best matched to layouts that already have branch circuit distribution handled elsewhere, or to simple AC systems where the shore power main is the only function needed at this panel location. Check panel cutout space, mounting depth, and cable routing before installation.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that run a straightforward 120V AC shore power setup and need a clear, dedicated main disconnect with leakage protection. It also suits owners replacing an older shore power main panel and keeping the rest of the AC system layout largely unchanged.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550914806006,"sku":"APL674915","price":805.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369348_apl674915_jpeg.jpg?v=1787804354"},{"product_id":"apl729344","title":"Blue Sea Systems AC Toggle Source Selector, 3 Source, 230V, 50A Max","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8598 is a 230V AC source selection panel for boats that need to switch between three AC inputs from one panel. It comes with three double-pole 16A breakers and one double-pole 32A breaker already installed, and the lockout arrangement keeps separate AC sources from being connected to the system at the same time.\u003c\/p\u003e\u003cp\u003eThis panel is built around a 10-1\/2 x 4-1\/2 in face and suits European 230V installations where the boat may have more than one shore feed or a mix of shore and onboard AC sources. Hot, neutral, and safety ground buses are already in place, so it can shorten panel wiring work in a refit or replacement job.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThree-source 230V AC selector panel for marine electrical systems\u003c\/li\u003e\n\u003cli\u003eThree double-pole 16A breakers and one double-pole 32A breaker are pre-installed\u003c\/li\u003e\n\u003cli\u003eLockout slides keep AC sources from being tied together during source changes\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired\u003c\/li\u003e\n\u003cli\u003eRed reverse-polarity indicator and green ON LEDs give quick status at the panel\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions are built into the panel face\u003c\/li\u003e\n\u003cli\u003e0.125 in 5052-H32 aluminum panel with MIL-C-5541C chemical treatment and a graphite two-part textured polyurethane finish\u003c\/li\u003e\n\u003cli\u003eOverall size is 10-1\/2 x 4-1\/2 in with 9-11\/16 x 3-11\/16 in mounting centers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is for 230V AC layouts and is not the right choice for 120V service. It fits boats that need one selector panel to handle three incoming AC sources while keeping the main AC switching and protection in one compact location.\u003c\/p\u003e\u003cp\u003eIt also works well as an extension to an existing metal panel setup or as a replacement panel when the vessel already uses this style of cutout and mounting pattern.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe installed buses and breakers keep the wiring layout straightforward, but the backlight circuit still needs a DC positive feed and a DC ground. When this panel serves as the main shore power disconnect, it should be mounted within 10 feet of the shore power inlet measured along the conductors unless additional overcurrent protection is fitted closer to the inlet.\u003c\/p\u003e\u003cp\u003eMount it where both the front and rear stay protected from water, or use a waterproof shield if either side may be exposed. It should not be installed in gasoline engine spaces, battery compartments, or other areas with explosive vapors because the breakers are not ignition protected.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis panel suits cruising boats and working craft that carry more than one AC source and need a clear transfer point between them. It is also a good fit in refits where the owner wants a finished selector panel with source protection, polarity indication, and backlit labeling already integrated.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550984700150,"sku":"APL729344","price":634.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322657_apl729344.webp?v=1787806079"},{"product_id":"apl667659","title":"Blue Sea Systems AC Analog Micro Voltmeter, 2 in Face, Backlit, 2-Wire Connection","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems AC Analog Micro Voltmeter is a compact analog panel meter for monitoring AC voltage on a boat’s electrical panel. It is offered in 0 to 150V AC and 0 to 250V AC ranges, giving the installer a scale that matches the onboard AC system being monitored.\u003c\/p\u003e\u003cp\u003eThe 2 in face keeps the meter easy to fit into tight helm, cabin, or distribution panel layouts while still giving a clear dial reading. The scale is marked in 5 volt increments, which makes it useful for quick checks of shore power, generator output, or AC distribution voltage without scrolling through a digital display.\u003c\/p\u003e\u003cp\u003eThe meter connects to AC hot and neutral for voltage sensing and powers itself from that same connection. The face is backlit for low-light panels, with separate 12V or 24V DC backlight wiring depending on the vessel’s lighting circuit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAnalog AC voltage monitoring for marine electrical panels, with 0 to 150V AC and 0 to 250V AC configurations available.\u003c\/li\u003e\n\u003cli\u003e2 in meter face fits compact panel layouts where full-size instrumentation would take up too much space.\u003c\/li\u003e\n\u003cli\u003eDial marked in 5 volt increments for quick voltage checks at the helm, nav station, or main AC panel.\u003c\/li\u003e\n\u003cli\u003eSimple connection to AC hot and neutral for sensing, with the meter powered from the same AC connection.\u003c\/li\u003e\n\u003cli\u003eBacklit face helps keep the voltage reading visible in cabins, engine rooms, and low-light panel locations.\u003c\/li\u003e\n\u003cli\u003eSeparate 12V or 24V DC backlight connections allow the illumination to tie into common onboard DC lighting circuits.\u003c\/li\u003e\n\u003cli\u003eLow weight of 0.19 lb makes it easy to integrate into lightweight panels and retrofit installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis voltmeter is offered in two configurations that differ by AC voltage range. The right range depends on the AC system or panel section being monitored.\u003c\/p\u003e\u003cp\u003eBoth variants share the same micro analog meter format, 2 in face size, backlit face, and AC hot and neutral sensing connection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8244, Function 0 to 150V. This range keeps the dial focused for lower-voltage AC monitoring, such as panels where the expected reading sits well within a 150V scale.\u003c\/li\u003e\n\u003cli\u003e8245, Function 0 to 250V. This range gives more headroom on the dial for higher-voltage AC monitoring where a 150V scale would not be appropriate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse this meter in an AC panel location where the face can be read easily and the rear terminals can be protected from contact. The sensing connection is made to AC hot and neutral, so installation should follow the vessel’s AC wiring practices and should be handled with the AC source isolated.\u003c\/p\u003e\u003cp\u003eThe backlight uses separate DC wiring, which allows the meter illumination to come on with the rest of the panel lighting. Use the correct backlight leads for a 12V or 24V DC lighting circuit so the illumination matches the boat’s electrical setup.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis meter is a practical match for boat owners and installers who want a dedicated AC voltage reading at the distribution panel without adding a digital monitor. It is especially useful where a simple glance at shore power, inverter, or generator voltage is enough to confirm that the AC supply is in the expected range.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"0 to 250V","offer_id":51550996627702,"sku":"APL667659-V9","price":59.99,"currency_code":"USD","in_stock":true},{"title":"0 to 150V","offer_id":51550996660470,"sku":"APL667659-V5","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370889_apl667659_jpeg.jpg?v=1787806176"},{"product_id":"apl281536","title":"Blue Sea Systems 8 Position Switch CLB + Meter Vertical, 12V DC, 80A per Bus","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1463 is a vertical 8-position DC switch panel with an analog voltmeter for 12V systems. It combines eight switched branch circuits with a meter that reads 8 to 16V DC, and the selector toggle lets you check up to three battery banks from the panel. The panel measures 10.75 x 4.88 x 3.50 inches and carries an 80A maximum amperage rating.\u003c\/p\u003e\u003cp\u003eAs supplied, it comes set up with eight 10A push-button reset quick-connect circuit breakers and eight SPST ON-OFF rocker switches. That makes it a practical fit for boats that need one compact panel for common 12V loads while keeping battery voltage easy to check during normal use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight switched DC circuits with individual SPST ON-OFF rocker switches\u003c\/li\u003e\n\u003cli\u003eBuilt-in analog voltmeter with an 8 to 16V DC range\u003c\/li\u003e\n\u003cli\u003eMeter selector toggle for checking up to three battery banks\u003c\/li\u003e\n\u003cli\u003e80A maximum amperage rating for the panel\u003c\/li\u003e\n\u003cli\u003eVertical format that fits a narrow mounting area\u003c\/li\u003e\n\u003cli\u003ePanel size of 10.75 x 4.88 inches with 3.50 inches of depth behind the face\u003c\/li\u003e\n\u003cli\u003eSupplied with eight 10A push-button reset quick-connect circuit breakers\u003c\/li\u003e\n\u003cli\u003eIncludes a square-format label kit with 30 black labels for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is meant for 12V DC distribution, so it suits boats that run a standard 12V house or accessory system and want switching and voltage monitoring in one place. The narrow vertical layout works well at the helm, nav station, cabin entry, or another bulkhead location where width is limited but you still want eight labeled circuits in easy reach.\u003c\/p\u003e\u003cp\u003eBefore installation, check the available depth behind the mounting surface and match each branch load to the supplied 10A breaker setup. It is a good match for refits where an older eight-circuit panel is being replaced, or for new builds that need a clean, organized panel for lights, electronics, pumps, and other everyday 12V services.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8 x 7054 push-button reset only quick-connect circuit breakers, 10A\u003c\/li\u003e\n\u003cli\u003e8 x 7480 SPST ON-OFF rocker switches\u003c\/li\u003e\n\u003cli\u003e1 x 8003 DC analog voltmeter, 8 to 16V DC\u003c\/li\u003e\n\u003cli\u003e1 x 4205 basic DC label kit with 30 black square labels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551019303158,"sku":"APL281536","price":564.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369189_apl281536_jpeg.jpg?v=1787806835"},{"product_id":"apl937261","title":"Blue Sea Systems WeatherDeck DPDT Toggle Switch, ON-OFF-ON, 5A, 30V DC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 4155 is a WeatherDeck toggle switch with DPDT ON-OFF-ON action for DC circuits up to 30V and 5A. It uses six 0.25 in quick-connect terminals, so it fits panel wiring that uses push-on tab connections rather than screw terminals.\u003c\/p\u003e\u003cp\u003eThis switch is made for Blue Sea Systems WeatherDeck panels and is commonly used where navigation and anchor light functions share one bulb and need a center-off position. Its nickel-plated brass and phenolic construction helps it hold up in wet panel spaces where corrosion is a concern.\u003c\/p\u003e\u003cp\u003eWhen it is fitted with the matching WeatherDeck toggle switch boot, the switch assembly is rated IP67 for temporary immersion up to 30 minutes. That makes it a sensible choice for open helms, center console switch panels, and other exposed mounting spots that see spray and washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDPDT ON-OFF-ON switching for circuits that need two poles and a center-off position\u003c\/li\u003e\n\u003cli\u003e5A maximum rating at 30V DC, which suits many 12V and 24V control circuits within that load range\u003c\/li\u003e\n\u003cli\u003eSix 0.25 in quick-connect tabs for common marine panel wiring with female disconnect terminals\u003c\/li\u003e\n\u003cli\u003eNickel-plated brass and phenolic construction that helps resist corrosion in damp marine environments\u003c\/li\u003e\n\u003cli\u003eIP67 temporary immersion rating when used with the matching WeatherDeck toggle switch boot\u003c\/li\u003e\n\u003cli\u003eCommonly used for navigation and anchor light switching where one bulb handles both functions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a panel switch for Blue Sea Systems WeatherDeck installations and other low-current DC switching jobs that call for a DPDT center-off layout. The 30V DC maximum covers nominal 12V and 24V systems, but the connected load still needs to stay within the 5A rating.\u003c\/p\u003e\u003cp\u003eIt is a good match when you need a compact toggle switch with tab terminals and clear mechanical positions instead of a sealed rocker or a heavy-load battery switch. On boats, that usually means lighting control, changeover functions, and other branch circuits where the switch handles logic or light-duty loads.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor exposed mounting locations, use the matching WeatherDeck toggle switch boot so the switch opening is protected against spray and temporary immersion. In protected interior panels, the switch still benefits from its corrosion-resistant construction, but the boot is what gives the assembly its IP67 protection.\u003c\/p\u003e\u003cp\u003eCheck terminal orientation and wire routing before final installation, especially in tight helm panels where multiple quick-connect terminals sit close together. This switch is best used where panel depth, tab-terminal wiring, and the DPDT ON-OFF-ON function all line up with the circuit you are building or replacing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis switch suits boat owners replacing a worn WeatherDeck panel switch or building a waterproof panel around light-duty DC functions. It makes the most sense on center consoles, pilot houses, fishing boats, and workboats where an exposed switch panel still needs straightforward manual control.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551115477238,"sku":"APL937261","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369405_apl937261_jpeg.jpg?v=1787807704"},{"product_id":"apl218320","title":"Blue Sea Systems Waterproof In-Line ATO\/ATC Fuse Holder, 30A Max, 12 AWG Pigtails","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 5065 is a waterproof in-line fuse holder for ATO\/ATC blade fuses, with 12 AWG pigtails, a 30A maximum fuse size, and a 32V DC rating. It is a straightforward way to add fuse protection to a single circuit where wiring may be exposed to spray, damp lockers, or routine washdowns.\u003c\/p\u003e\u003cp\u003eThis holder fits the kind of boat wiring job where a full fuse block is not necessary and a protected fuse point needs to sit directly in the wire run. The fuse is sold separately, which lets you match the fuse value to the circuit load and conductor size instead of being locked into a preset amperage.\u003c\/p\u003e\u003cp\u003eFor marine refits and accessory additions, this style works well when you want to protect one branch circuit close to the power source and still keep the fuse easy to service later.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts standard ATO\/ATC blade fuses for single in-line circuit protection\u003c\/li\u003e\n\u003cli\u003eWaterproof housing helps shield the fuse in wet or splash-prone wiring areas\u003c\/li\u003e\n\u003cli\u003eSupplied with 12 AWG pigtails for direct splicing into the circuit\u003c\/li\u003e\n\u003cli\u003eRated up to 32V DC for many common 12V and 24V boat systems\u003c\/li\u003e\n\u003cli\u003eSupports fuse sizes up to 30A\u003c\/li\u003e\n\u003cli\u003eFuse is not included, so the circuit can be matched to the correct amperage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis holder is for ATO\/ATC blade fuses only. It is a good match for smaller DC branch circuits where an in-line fuse makes more sense than adding another panel or fuse block. It is not the right format for MAXI, ANL, or glass-style fuses.\u003c\/p\u003e\u003cp\u003eOn board, it suits accessory feeds such as electronics, lighting, pumps, and other protected circuits that stay within the holder's current and voltage limits. Before installation, the chosen fuse value should match both the equipment load and the wire size in the circuit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe pre-attached 12 AWG leads keep installation simple when adding or replacing an in-line fuse point in an existing harness. This can be useful behind the helm, inside a console, under a berth, or in a locker where space is limited and moisture protection still matters.\u003c\/p\u003e\u003cp\u003eMount it where the fuse can be reached without pulling apart the harness, and leave enough wire slack to open the holder for inspection or fuse changes. That makes troubleshooting easier when you are working in tight spaces on board.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a sensible fit for boat owners, riggers, and service techs who are adding one protected circuit at a time or repairing a damaged holder in an existing run. It also suits small upgrades where keeping the fuse close to the source and away from an exposed connection matters more than expanding the main distribution panel.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551122292982,"sku":"APL218320","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322616_apl218320.webp?v=1787808032"},{"product_id":"apl788516","title":"Blue Sea Systems AC Main 6-Position Circuit Breaker Panel, 120V AC, 30A Double Pole Main, 4 x 15A Branch","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8412 is a 120V AC main distribution panel with one 30A double-pole main breaker, six branch circuit positions, and a 50A maximum panel amperage.\u003c\/p\u003e\u003cp\u003eIt comes with four 15A single-pole branch breakers already installed, which leaves two branch positions open for future loads. Reverse polarity indication, backlit circuit labels, and ON LEDs at every circuit position make it easier to confirm shore power status and see which circuits are energized at a glance.\u003c\/p\u003e\u003cp\u003eHot, neutral, and safety ground buses are already installed and pre-wired, so the panel suits refits where a clean 120V AC layout is needed without building the whole bus structure from scratch. The face measures 10.5 x 4.5 inches, with a panel depth of 2.5 inches behind the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC panel with a 30A double-pole main breaker already fitted\u003c\/li\u003e\n\u003cli\u003eFour 15A single-pole branch breakers installed, with two open branch positions for later expansion\u003c\/li\u003e\n\u003cli\u003e50A maximum panel amperage for the panel assembly\u003c\/li\u003e\n\u003cli\u003eRed reverse polarity LED for quick fault indication when shore power wiring is not correct\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses installed and fully pre-wired\u003c\/li\u003e\n\u003cli\u003eBacklit label positions and ON indication LEDs at every circuit position\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis panel is intended for 120V AC shore power systems and works best in a protected helm, cabin, or electrical locker location where the panel will stay dry. It is not a waterproof panel, and it is not meant for explosive spaces such as gasoline engine rooms or battery compartments.\u003c\/p\u003e\u003cp\u003eWhen it serves as the vessel's main shore power disconnect, the mounting location should be within 10 feet of the shore power inlet or the electrical attachment point of a permanently installed shore power lead. That makes it a practical choice for compact refits where panel space is limited but there still needs to be room for a main breaker, active branch circuits, and a little expansion capacity.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis panel is a good fit for boats that need a straightforward 120V AC distribution point for cabin receptacles, a battery charger, galley outlets, water heater circuits, or similar branch loads. It also suits owners replacing an older horizontal AC panel who want the wiring buses already in place and do not want to give up spare circuit positions for later upgrades.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551141855478,"sku":"APL788516","price":436.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322632_apl788516.webp?v=1787808535"},{"product_id":"apl519596","title":"Blue Sea Systems 360 Panel Rocker Switch, 0.187in Quick Connect Tabs","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 360 Panel Rocker Switch is a replacement or configuration switch for Blue Sea 360 Panel System installations where a specific pole, throw, and switch action is needed. It fits 360 panel modules used for Gauge, DC Push Button + Switch, and DC Battery Management layouts, making it useful when building a new panel or matching an existing switch position on board.\u003c\/p\u003e\u003cp\u003eThis rocker switch range uses Quick Connect Tab terminals with a 0.187in (4.75 mm) terminal size, which keeps wiring serviceable in tight helm, cabin, and electrical panel spaces. All listed configurations are rated for 10A at 12V DC, with additional AC and 24V DC ratings varying by pole and throw configuration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Blue Sea 360 Panel System modules, including Gauge, DC Push Button + Switch, and DC Battery Management applications.\u003c\/li\u003e\n\u003cli\u003e0.187in (4.75 mm) Quick Connect Tab terminals support straightforward panel wiring and future service access.\u003c\/li\u003e\n\u003cli\u003eAvailable in SPST and SPDT configurations for simple on-off circuits or circuits that need switching between two outputs.\u003c\/li\u003e\n\u003cli\u003eMaintained and momentary switch actions are available, with parentheses indicating momentary ON positions.\u003c\/li\u003e\n\u003cli\u003eRated for 10A at 12V DC across the listed range, suitable for properly protected low-voltage marine control circuits.\u003c\/li\u003e\n\u003cli\u003eCompact rocker format works well for organized helm panels, distribution panels, and auxiliary control positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product family covers six switch configurations. The main differences are pole and throw type, switch action, and whether the action is maintained or momentary.\u003c\/p\u003e\u003cp\u003eSPST versions cover single-circuit on-off control, while SPDT versions support switching one input between two output paths or control states. Options include ON-OFF, ON-OFF-ON, ON-OFF-(ON), (ON)-OFF, and (ON)-OFF-(ON) actions, with one (ON)-OFF-(ON) configuration marked as standalone.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMatch the replacement switch to the existing circuit function before wiring. SPST configurations suit basic on-off control, while SPDT configurations are used where the circuit needs a center-off position with two selectable directions or functions.\u003c\/p\u003e\u003cp\u003eUse the amperage rating that applies to the selected variant and protect the circuit with properly sized wiring and overcurrent protection. The 0.187in tab size should be checked against the existing female disconnects before installation, especially when refitting an older panel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch range is a practical match for boat owners, installers, and panel builders working with Blue Sea 360 Panel System layouts. It is commonly relevant for helm controls, DC accessory switching, battery management panels, and service replacements where the switch action must match the original function.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"ON-OFF-(ON) \/ SPDT","offer_id":51551142936822,"sku":"APL519596-V1","price":5.99,"currency_code":"USD","in_stock":false},{"title":"ON-OFF \/ SPST","offer_id":51551142969590,"sku":"APL519596-V6","price":6.99,"currency_code":"USD","in_stock":true},{"title":"(ON)-OFF-(ON) Standalone \/ SPDT","offer_id":51551143002358,"sku":"APL519596-V5","price":5.99,"currency_code":"USD","in_stock":true},{"title":"ON-OFF-ON \/ SPDT","offer_id":51551143035126,"sku":"APL519596-V2","price":6.99,"currency_code":"USD","in_stock":true},{"title":"(ON)-OFF \/ SPST","offer_id":51551143067894,"sku":"APL519596-V7","price":5.99,"currency_code":"USD","in_stock":true},{"title":"(ON)-OFF-(ON) \/ SPDT","offer_id":51551143100662,"sku":"APL519596-V4","price":5.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325035_apl519596.webp?v=1787808605"},{"product_id":"apl669830","title":"Blue Sea Systems Traditional Metal DC Circuit Breaker Panel, 12V\/24V DC, 100A, White Toggle Breakers, Backlit Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Traditional Metal DC Panel is a pre-wired DC circuit breaker panel for 12V DC and 24V DC boat electrical systems, with white toggle breakers and backlit circuit labels for easier circuit identification. The range includes 3-position and 8-position versions, both rated for a maximum amperage of 100A.\u003c\/p\u003e\u003cp\u003eThis panel works well as an extension to an existing DC distribution panel or as a replacement panel when a boat needs cleaner circuit control at the helm, cabin, nav station, or electrical locker. Positive, negative, and grounding buses are already installed, which keeps the installation more orderly and reduces the amount of wiring work needed behind the panel.\u003c\/p\u003e\u003cp\u003eEach circuit position has an ON-indicating LED, so circuit status is easy to check at a glance. The white toggle layout gives the panel a clean look while keeping operation simple for everyday loads such as lights, pumps, electronics, and accessory circuits, provided the connected loads are matched to the breakers and the vessel wiring.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePre-wired DC breaker panel with positive, negative, and grounding buses already installed.\u003c\/li\u003e\n\u003cli\u003eSupports 12V DC and 24V DC electrical systems, with a 100A maximum amperage rating.\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions help identify circuits in low light without adding a separate backlighting kit.\u003c\/li\u003e\n\u003cli\u003eON-indicating LEDs are installed in all circuit positions for quick status checks.\u003c\/li\u003e\n\u003cli\u003eWhite A-Series toggle circuit breakers give each circuit a familiar switch-style control point.\u003c\/li\u003e\n\u003cli\u003eAvailable in 3-position and 8-position versions to match the number of branch circuits needed on board.\u003c\/li\u003e\n\u003cli\u003eSuited for use as an extension to an existing panel or as a full replacement in a DC distribution layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Traditional Metal DC Panel is offered in two configurations. The main difference is the number of circuit breaker positions, which affects both panel capacity and installed height.\u003c\/p\u003e\u003cp\u003eBoth versions share the same 5.25 in width, 12V DC and 24V DC nominal voltage compatibility, 100A maximum amperage rating, backlit label positions, installed buses, white toggle breakers, and ON-indicating LEDs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8025 has 3 positions and measures 3.75 in high by 5.25 in wide. It fits smaller DC distribution layouts or add-on panels where only a few protected circuits are needed.\u003c\/li\u003e\n\u003cli\u003e8023 has 8 positions and measures 7.50 in high by 5.25 in wide. It gives more room for branch circuits when replacing a larger panel or expanding a boat electrical system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe pre-wired bus arrangement helps keep the back of the panel organized, but the panel should still be installed with properly sized marine wire, terminals, overcurrent protection, and strain relief for the vessel layout. Confirm the available cutout space and behind-panel clearance before ordering, especially when replacing an older panel with different dimensions.\u003c\/p\u003e\u003cp\u003eBecause the panel is rated for both 12V DC and 24V DC systems, it can be used on a wide range of small boats, cruising sailboats, fishing boats, and auxiliary DC panels. The connected circuits should be planned around the actual load, breaker rating, wire size, and battery system configuration.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 3-position version is a practical match for compact helm stations, small accessory panels, or limited-space upgrades. The 8-position version is better suited to broader DC distribution needs where several loads need individual switching and circuit protection from one panel location.\u003c\/p\u003e\u003cp\u003eFor a clean installation, match the selected variant to the number of circuits required now and allow room for likely additions such as electronics, lighting, pumps, chargers, or deck accessories. Labeling each circuit clearly helps future troubleshooting and makes the panel easier to use by anyone on board.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"8","offer_id":51551143198966,"sku":"APL669830-V1","price":404.99,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":51551143231734,"sku":"APL669830-V4","price":272.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370696_apl669830_jpeg.jpg?v=1787808610"},{"product_id":"apl068694","title":"Blue Sea Systems EV Battery Charger Display, For P12 Battery Chargers, 6-36V DC, 1-3 Battery Banks","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 7517 is a remote battery charger display for P12 battery chargers that can also show voltage for up to three battery banks on its own. When it is connected to a P12 charger, the screen can show charger summary data including voltage, charging current, charging stage, and faults in plain language.\u003c\/p\u003e\u003cp\u003eThe display runs on 6 to 36V DC, reads one to three battery inputs with a common reference, and uses a 55 x 28 mm yellow OLED screen that stays readable in daylight. It will also keep showing bank voltage bar graphs when AC power is not present, so you still get a quick check of battery status at the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMonitors voltage on 1 to 3 battery banks and detects the number of banks automatically.\u003c\/li\u003e\n\u003cli\u003eShows the P12 charger summary screen with voltage, charging current, charging stage, and charger faults when linked to a P12 charger.\u003c\/li\u003e\n\u003cli\u003eAccepts 6 to 36V DC input and includes reverse polarity protection.\u003c\/li\u003e\n\u003cli\u003eYellow OLED display area measures 55 x 28 mm and remains readable in daylight.\u003c\/li\u003e\n\u003cli\u003eDip-switch setup selects voltage bar graphs or charger summary view.\u003c\/li\u003e\n\u003cli\u003eContinues to show voltage bar graphs even when AC power is not present.\u003c\/li\u003e\n\u003cli\u003eOptional standby mode shuts the screen off after 4 hours, and the built-in knock sensor wakes it back up.\u003c\/li\u003e\n\u003cli\u003eBuilt as a drop-in replacement for traditional rectangular displays.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis display is meant for boats using a Blue Sea Systems P12 charger and needing charger information away from the charger itself. It also works as a straightforward battery voltage display when no P12 charger is connected, which is useful for house, start, and auxiliary bank monitoring from one panel location.\u003c\/p\u003e\u003cp\u003eIt suits refits where panel space is already cut for a rectangular remote monitor. It is a good match for cruisers, pilothouse boats, and workboats where the charger is mounted out of sight but battery status still needs to be checked quickly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eScreen selection is handled by dip switches, letting the display show voltage bar graphs or the P12 charger summary screen. The included 25 ft Cat5e cable gives room to mount the display at a helm, nav station, or cabin electrical panel while the charger stays in a separate compartment.\u003c\/p\u003e\u003cp\u003eCurrent draw is up to 50 mA in normal use, and standby mode drops draw to less than 1 mA after 4 hours of inactivity. A tap on the unit wakes the display through the built-in knock sensor, which is useful when the monitor is mounted flush in a panel.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEV Battery Charger Display\u003c\/li\u003e\n\u003cli\u003eMounting gasket\u003c\/li\u003e\n\u003cli\u003e25 ft Cat5e cable\u003c\/li\u003e\n\u003cli\u003e4-position connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551143821558,"sku":"APL068694","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369554_apl068694_jpeg.jpg?v=1787808657"},{"product_id":"apl763885","title":"Blue Sea Systems AC Main + 3 Positions Circuit Breaker Panel, 120V AC, 30A Main, Digital Multimeter","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8405 is a 120V AC main distribution panel with one 30A double-pole main breaker, three 15A single-pole branch breakers, and an 8247 digital multi-function meter with alarm. The face size is 7.50 x 5.25 inches, which makes it a practical fit for compact AC sections on cruisers, sailboats, and refit projects where panel space is limited.\u003c\/p\u003e\u003cp\u003eIt works as a full replacement panel or as an extension to an existing 120V AC system. Hot, neutral, and safety ground buses are installed and pre-wired, and the front panel adds a reverse-polarity warning LED, backlit circuit label positions, and ON indication LEDs at each breaker position. The digital meter lets you check AC voltage, current, power, and frequency from the panel, with high and low voltage alarms plus a high current alarm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC panel layout with one 30A double-pole main breaker and three 15A single-pole branch breakers\u003c\/li\u003e\n\u003cli\u003e8247 digital meter displays AC voltage, current, power, and frequency, with high and low voltage alarms plus a high current alarm\u003c\/li\u003e\n\u003cli\u003eReverse-polarity indicator gives a clear warning when shore power wiring is not correct\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are already installed and pre-wired\u003c\/li\u003e\n\u003cli\u003eBacklit label positions and ON LEDs make circuit status easier to read in low light\u003c\/li\u003e\n\u003cli\u003eIncludes a 30-label basic AC panel label set for cleaner circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis panel suits boats that need a straightforward 120V AC main with space for up to three 15A branch circuits. The breaker layout is well matched to common cabin and utility loads when the rest of the boat's AC design, wire size, and shore-power protection are set up correctly. Countersunk mounting holes help the panel sit cleanly in a finished electrical face.\u003c\/p\u003e\u003cp\u003eFor refits, it helps to confirm the front cutout, wire routing, and service clearance behind the mounting surface before ordering. An optional 4027 isolation cover is available for the rear of the panel and measures 5-1\/4 x 7-1\/2 x 3 inches.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 8405 is built for 120V AC installations, so it is intended for boats using North American style shore power rather than 230V AC systems. It is a good match for owners replacing an older AC panel or adding a compact sub-panel where breaker control, meter feedback, and clear circuit labeling need to stay in one small footprint.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551150964982,"sku":"APL763885","price":726.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322619_apl763885.webp?v=1787809043"},{"product_id":"apl161890","title":"Blue Sea Systems PowerBar Dual BusBar, 200A, 48V DC, 3\/8\"-16 Studs, Tin-Plated Copper, With Insulators","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 2019 is a dual-stud common busbar for creating a single high-current connection point in DC systems up to 48V. It uses two 3\/8\"-16 studs and carries up to 200A, so it suits battery cables, charger feeds, inverter connections, and other heavy DC conductors that need a clean shared point.\u003c\/p\u003e\u003cp\u003eThe current path is tin-plated copper, and the base is glass-reinforced thermoplastic with a UL 94-V0 flame rating. That makes it a practical choice for battery compartments, consoles, machinery spaces, and other onboard areas where vibration, moisture, and salt-heavy air can work on electrical hardware over time.\u003c\/p\u003e\u003cp\u003eThis busbar is a good match when the job calls for a simple two-stud connection rather than a larger distribution block. On refits and service work, it helps tidy up cable routing and gives larger ring terminals a dedicated place to land without stacking everything on a battery post.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo 3\/8\"-16 terminal studs sized for larger ring terminals and high-current cable runs\u003c\/li\u003e\n\u003cli\u003e200A rating with a 48V DC maximum for battery, charging, and main DC distribution circuits\u003c\/li\u003e\n\u003cli\u003eTin-plated copper bus for strong conductivity and better resistance to corrosion in marine electrical spaces\u003c\/li\u003e\n\u003cli\u003eGlass-reinforced thermoplastic base with UL 94-V0 flame rating\u003c\/li\u003e\n\u003cli\u003e100 in-lb stud torque specification to help secure cable lugs correctly during installation\u003c\/li\u003e\n\u003cli\u003eCompact layout that consolidates power sources or loads into one common connection point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a common busbar, so it can be used on either the positive or negative side of a DC circuit as long as the system stays within its 48V DC limit and the connected cable, overcurrent protection, and load are sized appropriately. It is best suited to installations that need two stud connections and enough room for heavy cable bends and lug clearance around each stud.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit on a solid surface close to the batteries, charger output, inverter feed, or other high-current equipment to keep cable runs short and well supported. Use cable lugs that match 3\/8\" studs, tighten the connections to the stated torque, and support the cable weight so the studs are not carrying strain from unsupported conductors.\u003c\/p\u003e\u003cp\u003eFor boats that see regular washdown or damp bilge-adjacent conditions, place the busbar where it stays protected from standing water and where routine inspection is still easy. That makes it easier to spot loose hardware, heat discoloration, or cable movement before it becomes a bigger wiring problem.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part fits small to mid-size electrical builds where a compact common tie point is enough and a larger multi-circuit busbar would take up unnecessary space. It is especially useful when cleaning up battery bank wiring, combining charger or DC source connections, or creating a dedicated heavy-cable junction in a tight compartment.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551169118454,"sku":"APL161890","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369446_apl161890_jpeg.jpg?v=1787809843"},{"product_id":"apl310776","title":"Blue Sea Systems C-Series Toggle Circuit Breaker, Single Pole, AC\/DC, Magnetic Hydraulic, Trip Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems C-Series Toggle Circuit Breaker is a single-pole magnetic hydraulic breaker for marine AC and DC circuit protection where a toggle switch and resettable breaker need to share the same panel position. It is used on higher-load boat circuits such as inverters, bow thrusters, windlasses, and other equipment that can see start-up surge.\u003c\/p\u003e\u003cp\u003eThe range covers 5A through 100A ratings, with white toggle versions for standard installations and a red 100A ignition-protected version for locations where ignition protection is required. Most models are rated up to 240V AC and 80V DC, while the higher-amperage versions use lower DC voltage limits, so the selected amperage and voltage rating should be matched to the circuit design before installation.\u003c\/p\u003e\u003cp\u003eThe trip-free mechanism means the toggle cannot be held closed after the breaker trips. That matters on board because a faulted circuit should stay open until the cause is found, rather than being forced back on at the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle-pole C-Series toggle breaker for panel-mounted switching and circuit protection in one device.\u003c\/li\u003e\n\u003cli\u003eMagnetic hydraulic, trip-free operation helps keep a faulted circuit open after a trip.\u003c\/li\u003e\n\u003cli\u003eAmperage options from 5A to 100A support a range of boat loads, from smaller branch circuits to heavier equipment circuits.\u003c\/li\u003e\n\u003cli\u003eRated for AC and DC use, with model-specific voltage limits that must be checked against the vessel system.\u003c\/li\u003e\n\u003cli\u003e1\/4-20 tin-plated brass terminal studs provide a secure connection point for properly sized marine cable terminals.\u003c\/li\u003e\n\u003cli\u003e#6-32 stainless steel mounting screws support installation in compatible C-Series breaker panels.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -40 degrees C to 85 degrees C suits exposed electrical spaces, machinery areas, and cabins subject to wide temperature changes.\u003c\/li\u003e\n\u003cli\u003eRated for 10,000 switching cycles, allowing the breaker to serve as a control switch where regular manual operation is part of the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis C-Series single-pole toggle breaker range varies by amperage, actuator color, and ignition-protection status. The available amperages run from 5A, 10A, 15A, 20A, 25A, and 30A up through 50A, 60A, 80A, and 100A, so the correct version should be selected based on the protected cable size, expected load, and the circuit protection plan for the boat.\u003c\/p\u003e\u003cp\u003eWhite versions are listed as not ignition protected. The red 100A version is the ignition-protected option in this range and is the one intended for installations where that rating is required. The single-pole toggle layout, magnetic hydraulic trip-free breaker type, tin-plated brass terminal studs, and stainless mounting screws are consistent across the range.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the breaker in a compatible panel cutout or Blue Sea Systems C-Series breaker panel, with enough clearance behind the panel for the terminal studs, cable bends, boots, and service access. Use properly crimped terminals, support the cable so vibration is not carried by the studs, and torque the terminal connections to 35 in-lb where that specification applies.\u003c\/p\u003e\u003cp\u003eThe breaker rating should protect the wire, not just match the device on the circuit. On motor loads such as windlasses and thrusters, start-up current can be much higher than running current, so breaker sizing should be checked against the equipment manual, cable ampacity, voltage drop, and the applicable marine electrical standard for the vessel.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a C-Series, single-pole toggle breaker, so it is a good match for panels built around that breaker format. It is not a drop-in substitute for every marine breaker style, and it should be compared against the existing panel opening, rear clearance, terminal layout, amperage rating, and voltage rating before replacing an older breaker.\u003c\/p\u003e\u003cp\u003eThe 5A to 60A white models are commonly listed with an 80V DC maximum, while the 80A and 100A white models use a 65V DC maximum. The red 100A ignition-protected version is listed with a 48V DC maximum and a different interrupt rating, so it should be treated as its own configuration rather than a color change only.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese breakers are suited to boats where the helm, battery panel, DC distribution panel, or machinery-space panel needs resettable circuit protection that can also be used as a manual switch. They are especially relevant for circuits feeding equipment with meaningful current draw, including inverters, bow thrusters, and windlasses.\u003c\/p\u003e\u003cp\u003eThe ignition-protected 100A red version is the practical match for installations that require that protection level, such as certain gasoline-engine spaces or compartments where ignition-protected equipment is specified. For general DC distribution panels outside those areas, the white non-ignition-protected versions cover the wider amperage range.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"No \/ White \/ 5A","offer_id":51551170167030,"sku":"APL310776-V6","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 25A","offer_id":51551170199798,"sku":"APL310776-V10","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 50A","offer_id":51551170232566,"sku":"APL310776-V1","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 100A","offer_id":51551170265334,"sku":"APL310776-V4","price":57.99,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Red \/ 100A","offer_id":51551170298102,"sku":"APL310776-V5","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 60A","offer_id":51551170330870,"sku":"APL310776-V2","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 10A","offer_id":51551170363638,"sku":"APL310776-V7","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 20A","offer_id":51551170396406,"sku":"APL310776-V9","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 15A","offer_id":51551170429174,"sku":"APL310776-V8","price":57.99,"currency_code":"USD","in_stock":true},{"title":"No \/ White \/ 30A","offer_id":51551170461942,"sku":"APL310776-V11","price":57.99,"currency_code":"USD","in_stock":false},{"title":"No \/ White \/ 80A","offer_id":51551170494710,"sku":"APL310776-V3","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324529_apl310776.webp?v=1787809844"},{"product_id":"apl680320","title":"Blue Sea Systems 360 AC Circuit Breaker Panel, 30A ELCI, 5 Position, 120V AC, Flat Rocker","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1503 is a 120V AC 360 panel with a 30A ELCI main and five 15A branch breakers in a flat rocker layout. It gives you one place to switch and protect a small group of onboard AC circuits while adding leakage protection at the main. For boats running 30A shore power service, that is the key difference between this panel and a standard branch-only AC panel.\u003c\/p\u003e\u003cp\u003eThe main ELCI trips at 30mA, and the panel uses Blue Sea A-Series breakers with green ON LEDs and backlit label positions. That makes day-to-day use easier when the panel is mounted in a cabin, helm area, or electrical locker where lighting is often poor and you need to see circuit status at a glance.\u003c\/p\u003e\u003cp\u003eThis panel makes sense for boats that need a straightforward 120V AC distribution setup with five branch circuits instead of a larger custom panel. It is also part of the 360 panel family, which helps when you are matching an existing Blue Sea 360 layout or planning a later panel rework.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30A ELCI main breaker with 30mA leakage trip\u003c\/li\u003e\n\u003cli\u003eFive 15A branch breakers for separate 120V AC circuits\u003c\/li\u003e\n\u003cli\u003e120V AC panel format suited to 30A shore power systems\u003c\/li\u003e\n\u003cli\u003eBlue Sea A-Series flat rocker breakers\u003c\/li\u003e\n\u003cli\u003eGreen ON LEDs for quick circuit status checks\u003c\/li\u003e\n\u003cli\u003eBacklit label positions for easier identification in low light\u003c\/li\u003e\n\u003cli\u003ePanel size of 7.75 x 4.88 x 3.99 in. for tighter mounting spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe overall size is 7.75 x 4.88 x 3.99 in. (196.85 x 123.95 x 101.35 mm), so rear clearance matters before you commit to a bulkhead or cabinet face. The 3.99 in. depth is worth checking in shallow helm consoles and lockers where wire bends and terminal access can take up more room than expected.\u003c\/p\u003e\u003cp\u003eThis model uses a 30A ELCI main and five 15A branch positions, so it is best matched to boats with a modest AC load plan. If the rear of the panel will be exposed inside a locker or mounted near other equipment, insulating panel backs are separate parts rather than included with the panel.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe layout suits a boat that brings in 120V AC service and then splits that feed across a handful of onboard circuits. Common examples include receptacle runs, a battery charger, a water heater, or other dedicated AC loads that need individual branch protection and switching at the panel.\u003c\/p\u003e\u003cp\u003eBefore replacing an existing panel, confirm that your vessel uses 120V AC service and that the branch circuit plan matches the five 15A configuration. This is a good fit for owners and installers who want one AC main with leakage protection and a clean five-circuit branch panel in the same footprint.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551175672054,"sku":"APL680320","price":1106.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369349_apl680320_jpeg.jpg?v=1787810002"},{"product_id":"apl549334","title":"Blue Sea Systems Dual PowerPost Cable Connector, 48V DC, #10 Screw Mounting","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Dual PowerPost is a two-stud cable connector for creating protected termination points in marine DC power wiring. It is used when heavy-gauge conductors need a secure connection point, including outboard engine harness extensions and other high-current cable runs on boats.\u003c\/p\u003e\u003cp\u003eThe range is rated for up to 48V DC and mounts with #10 screws or M5 fasteners. Each configuration uses a red and black insulated layout, which helps keep positive and negative conductors separated and easy to identify during installation or service.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo-stud PowerPost layout gives large DC conductors a clear termination point instead of stacking connections in cramped battery or engine spaces.\u003c\/li\u003e\n\u003cli\u003e48V DC maximum voltage rating supports common 12V, 24V, 32V, and 48V marine DC systems within the product rating.\u003c\/li\u003e\n\u003cli\u003e#10 screw or M5 mounting keeps the connector easy to place on a bulkhead, inside a rigging compartment, or near an outboard harness extension point.\u003c\/li\u003e\n\u003cli\u003eRed and black insulators help separate polarity and reduce the chance of accidental contact around exposed cable lugs.\u003c\/li\u003e\n\u003cli\u003eAvailable with 5\/16\"-18 studs, 3\/8\"-16 studs, or one of each size for matching different cable lug hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Dual PowerPost is offered in multiple stud-size configurations so the connector can match the cable lugs already used in the boat’s DC wiring.\u003c\/p\u003e\u003cp\u003eThe stud size changes between variants. Across the range, the connector keeps the same two-stud format, 48V DC maximum voltage rating, #10 screw or M5 mounting, and red and black insulated layout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2016: Stud size pair 2 x 5\/16\"-18. This version suits installations where both cable lugs are sized for 5\/16\"-18 terminal studs, with a stud torque of 120 in-lb.\u003c\/li\u003e\n\u003cli\u003e2017: Stud size pair 2 x 3\/8\"-16. This version suits installations where both cable lugs are sized for 3\/8\"-16 terminal studs, with a stud torque of 140 in-lb.\u003c\/li\u003e\n\u003cli\u003e2018: Stud size pair 1 x 5\/16\"-18 plus 1 x 3\/8\"-16. This mixed-stud version is useful where two conductor ends use different lug sizes, such as some outboard harness extension work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so the cable lugs can sit flat on the studs without pulling against the conductor or bending sharply at the insulation. The connector should be mounted where the fasteners can be tightened properly and where the insulated posts remain accessible for inspection.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the ring terminal hole size on each cable end. Matching the stud size to the lug is important because oversized holes can reduce contact quality, while undersized lugs will not fit the stud.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis connector is a practical match for outboard-powered boats, repower projects, and DC wiring upgrades where factory cable length or conductor routing needs a clean termination point. It also works well in battery compartments, rigging areas, and protected electrical spaces where high-current conductors need to be joined or extended without turning the connection into an untidy stack of loose hardware.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual PowerPost cable connector\u003c\/li\u003e\n\u003cli\u003eOne black insulator\u003c\/li\u003e\n\u003cli\u003eOne red insulator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"2 x 5\/16\"-18","offer_id":51551180095734,"sku":"APL549334-V1","price":28.99,"currency_code":"USD","in_stock":true},{"title":"2 x 3\/8\"-16","offer_id":51551180128502,"sku":"APL549334-V2","price":28.99,"currency_code":"USD","in_stock":true},{"title":"1 x 5\/16\"-18 + 1 x 3\/8\"-16","offer_id":51551180161270,"sku":"APL549334-V3","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328908_apl549334.webp?v=1787810243"},{"product_id":"apl569629","title":"Blue Sea Systems Traditional Metal AC Main Circuit Breaker Panel, 120V AC, White Toggle, Metered","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Traditional Metal AC Main Breaker Panel is a metered 120V AC distribution panel for boats that need a dedicated AC main with branch circuit protection in a traditional metal layout. It is built around white-toggle A-Series circuit breakers and is offered in 8-position and 11-position configurations, with either a Micro Voltmeter + Micro Ammeter package or a Digital Multi-Function Meter with Alarm.\u003c\/p\u003e\u003cp\u003eThis panel family is made for AC shore-power and onboard AC distribution work where clear circuit status, reverse-polarity indication, and organized wiring matter. The hot, neutral, and safety ground buses are installed and pre-wired, which helps keep the back of the panel cleaner during a refit or new electrical build.\u003c\/p\u003e\u003cp\u003eThe range includes compact 5.25 in x 11.25 in panels for tighter vertical spaces and wider 10.50 in x 7.50 in panels for larger AC loads and more branch circuits. Each configuration uses 120V AC labeling and circuit indication, so owners can quickly see which AC circuits are on from the cabin, electrical locker, or nav station.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC main breaker panel range for marine AC distribution, shore-power circuits, and onboard AC loads.\u003c\/li\u003e\n\u003cli\u003eAvailable with 8 or 11 branch positions, matching different vessel layouts and available panel space.\u003c\/li\u003e\n\u003cli\u003eRed reverse-polarity indicating LED helps identify an unsafe AC polarity condition before loads are used.\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired for a cleaner panel installation.\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions and ON indicator LEDs make circuit status easier to read in low light.\u003c\/li\u003e\n\u003cli\u003eWhite-toggle A-Series circuit breakers provide a familiar switch feel and a consistent panel appearance.\u003c\/li\u003e\n\u003cli\u003eMetered configurations support AC monitoring through either separate micro voltage and amperage meters or a digital multi-function meter with alarm.\u003c\/li\u003e\n\u003cli\u003eTraditional metal construction suits refits, panel extensions, and full AC panel replacements on cruising and fishing boats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in four metered configurations. The main differences are the number of branch positions, the panel size, and the meter package fitted to the panel.\u003c\/p\u003e\u003cp\u003eThe 8-position versions share the 5.25 in x 11.25 in panel size, while the 11-position versions share the 10.50 in x 7.50 in panel size. Meter packages vary between separate micro voltage and amperage meters and a digital multi-function meter with alarm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8074: 8 positions, 5.25 in x 11.25 in panel, Micro Voltmeter + Micro Ammeter package. This layout suits a narrower panel opening while keeping voltage and amperage visible on separate meters.\u003c\/li\u003e\n\u003cli\u003e8406: 8 positions, 5.25 in x 11.25 in panel, Digital Multi-Function Meter with Alarm package. This version keeps the same narrow panel size and uses one digital meter package for consolidated AC monitoring.\u003c\/li\u003e\n\u003cli\u003e8076: 11 positions, 10.50 in x 7.50 in panel, Micro Voltmeter + Micro Ammeter package. The wider panel format gives more branch circuit capacity while retaining separate voltage and amperage readings.\u003c\/li\u003e\n\u003cli\u003e8407: 11 positions, 10.50 in x 7.50 in panel, Digital Multi-Function Meter with Alarm package. This configuration pairs the larger branch circuit layout with a digital meter package for boats that need more AC circuit positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThese panels are intended for 120V AC marine electrical systems. Before installation, confirm the vessel voltage, shore-power inlet arrangement, breaker requirements, panel cutout, and available depth behind the mounting surface.\u003c\/p\u003e\u003cp\u003eThe pre-wired bus layout helps reduce wiring work inside the electrical locker, but AC systems still require careful installation. A qualified marine electrician should verify the neutral and safety ground arrangement, breaker sizing, reverse-polarity indication, and final circuit labeling before the system is placed in service.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 5.25 in x 11.25 in versions are a practical fit where vertical space is available but panel width is limited. The 10.50 in x 7.50 in versions work better where the boat needs more branch circuits and has a wider mounting area.\u003c\/p\u003e\u003cp\u003eThis panel range is a good match for boat owners replacing an older AC panel, expanding an existing AC distribution setup, or cleaning up shore-power and branch circuit control in a cabin, galley, nav station, or protected electrical compartment.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eThe traditional metal panel format is well suited to the vibration, access limitations, and service needs found on boats. The white toggle breakers, backlit labels, and circuit status LEDs make the panel easier to operate during evening dockside use, generator operation, or checks before getting underway.\u003c\/p\u003e\u003cp\u003eFor saltwater boats, the panel should be mounted in a protected interior location where it is shielded from spray and direct weather exposure. Keep the rear wiring space dry, ventilated, and accessible so future circuit checks and breaker service can be handled without disturbing nearby equipment.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"10.50in x 7.50in \/ Micro Voltmeter + Micro Ammeter \/ 11","offer_id":51551181734134,"sku":"APL569629-V3","price":1021.99,"currency_code":"USD","in_stock":true},{"title":"5.25in x 11.25in \/ Digital Multi-Function Meter with Alarm \/ 8","offer_id":51551181766902,"sku":"APL569629-V2","price":867.99,"currency_code":"USD","in_stock":true},{"title":"5.25in x 11.25in \/ Micro Voltmeter + Micro Ammeter \/ 8","offer_id":51551181799670,"sku":"APL569629-V1","price":699.99,"currency_code":"USD","in_stock":true},{"title":"10.50in x 7.50in \/ Digital Multi-Function Meter with Alarm \/ 11","offer_id":51551181832438,"sku":"APL569629-V4","price":1025.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328914_apl569629.webp?v=1787810323"},{"product_id":"apl033557","title":"Blue Sea Systems Small Format DC Label Kit, For Contura Waterproof Panels, ST Blade Fuse Blocks, 60 Labels","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Small Format Label Kit is a 60-label set for marking common DC circuits on boat electrical panels and fuse blocks. Each label measures 0.625 in wide by 0.375 in high, so it fits the tight label spaces found on compact marine DC distribution gear without crowding the panel face.\u003c\/p\u003e\u003cp\u003eThese labels are made from material that is reinforced and weatherproof, which makes them a practical match for helm stations, cockpit panels, cabin distribution panels, and other locations where labels may see moisture, handling, and regular cleaning. They help keep circuit identification clear when troubleshooting, switching loads, or checking fuse locations on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIncludes 60 common DC circuit labels for organizing marine electrical loads.\u003c\/li\u003e\n\u003cli\u003eSmall label size of 0.625 in by 0.375 in fits compact panel and fuse block label areas.\u003c\/li\u003e\n\u003cli\u003eMaterial is reinforced and weatherproof for use around marine DC distribution panels.\u003c\/li\u003e\n\u003cli\u003eWorks with Contura Waterproof Circuit Breaker Panels and Contura Waterproof Fuse Panels.\u003c\/li\u003e\n\u003cli\u003eAlso fits ST Blade Fuse Blocks, including common 6-circuit and 12-circuit configurations.\u003c\/li\u003e\n\u003cli\u003eAvailable in black or gray so the label set can match the look of the panel or fuse block installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis label kit is offered in two color configurations. Both variants cover the same small-format label use case for DC circuit identification, with the color being the visible difference between the two options.\u003c\/p\u003e\u003cp\u003eThe shared 60-label format, small label dimensions, reinforced weatherproof material, and listed Blue Sea Systems panel and fuse block applications remain consistent across the black and gray versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8214: Black. This version suits panels and fuse block covers where a black label background matches the surrounding hardware or creates a darker finished look.\u003c\/li\u003e\n\u003cli\u003e8217: Gray. This version suits installations where gray labeling better matches the panel face, cover, or existing Blue Sea Systems components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe label size is intended for Blue Sea Systems Contura Waterproof Circuit Breaker Panels, Contura Waterproof Fuse Panels, and ST Blade Fuse Blocks. For a clean fit, confirm that the panel or fuse block has the small-format label area used by these Blue Sea Systems components.\u003c\/p\u003e\u003cp\u003eBecause these are identification labels rather than electrical components, there are no voltage, amperage, or network compatibility requirements to match. The key fit points are the physical label area, the label color, and the DC circuit names needed for the vessel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for new DC panel builds, refits, fuse block cleanup, and replacement of worn or unreadable labels. It is especially useful on boats with multiple house loads, electronics circuits, lighting circuits, pumps, and accessory circuits that need to be identified quickly at the panel.\u003c\/p\u003e\u003cp\u003eClear labeling makes day-to-day operation easier and helps during troubleshooting, especially when several people may operate or maintain the same boat. It also gives a cleaner finish to panel work after adding new circuits or reorganizing an existing DC system.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e60 small-format common DC labels\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":51551185010934,"sku":"APL033557-V5","price":12.99,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51551185043702,"sku":"APL033557-V2","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370920_apl033557_jpeg.jpg?v=1787810421"},{"product_id":"apl228163","title":"Blue Sea Systems m-Series Mini Selector Battery Switch, 4 Position, Battery Combine, 300A, 32V DC, IP66","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems m-Series Mini Selector Battery Switch is a 4-position battery switch for boats with two battery banks, letting the operator select bank 1, bank 2, both banks combined, or OFF from one control. It is rated for 32V DC systems, with 300A continuous, 500A intermittent for 5 minutes, and 900A starting for 30 seconds, which makes it a practical fit for outboards and small gasoline or diesel engine installations.\u003c\/p\u003e\u003cp\u003eThe make-before-break contact layout allows switching between battery banks without interrupting power, while the combine position can bring both banks online when the electrical system calls for it. The switch uses tinned copper terminal studs and accepts 3\/8 in or M10 ring terminals, with cable clearance for 4\/0 AWG cables.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSelector 4-position operation gives the helm or battery compartment a single control for OFF, battery 1, battery 2, and battery combine functions.\u003c\/li\u003e\n\u003cli\u003eBattery combine capability lets both banks feed the load side when that operating mode is needed.\u003c\/li\u003e\n\u003cli\u003eMake-before-break contact action helps keep connected loads powered while changing between battery banks.\u003c\/li\u003e\n\u003cli\u003e32V DC maximum voltage and 300A continuous rating support common low-voltage DC marine starting and house battery layouts.\u003c\/li\u003e\n\u003cli\u003eIP66 rating and ignition protection support installation in exposed marine areas and aboard gasoline-powered boats when installed correctly.\u003c\/li\u003e\n\u003cli\u003eTinned copper 3\/8 in-16 terminal studs accept 3\/8 in or M10 ring terminals and help keep high-current connections secure.\u003c\/li\u003e\n\u003cli\u003eCase accepts surface or rear panel mounting, and #10 mounting screws fit the mounting holes.\u003c\/li\u003e\n\u003cli\u003eTwo battery inputs and 4\/0 AWG cable rating give the installer room for a high-current two-bank installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations. The switch function, ratings, terminal format, and battery combine behavior remain the same across both variants.\u003c\/p\u003e\u003cp\u003eThe only listed difference is the housing color, so the choice mainly affects how the switch looks in the battery area, electrical panel, cockpit locker, or service compartment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6007, red: Red housing for installations where the battery switch should stand out visually or match a traditional battery disconnect layout.\u003c\/li\u003e\n\u003cli\u003e6007200, black: Black housing for panels or compartments where a lower-profile appearance fits better with surrounding electrical equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis switch is intended for two-bank DC battery systems where the same load side can be fed by either battery bank or by both banks together. It does not include an alternator field disconnect, so alternator protection and switching procedure should be considered as part of the full charging-system layout.\u003c\/p\u003e\u003cp\u003eThe 3\/8 in-16 terminal studs use a 120 in-lb torque value, and the case provides 1.12 in of clearance for 4\/0 AWG cable routing. That matters in battery compartments where cable bend radius, lug stack-up, and service access can be tight.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch fits small-boat starting and house-bank layouts where the operator wants manual control over two isolated battery banks and a combine option. It is a good match for center consoles, cruisers, fishing boats, sailboats, and workboats using 12V or 24V battery systems within the switch rating.\u003c\/p\u003e\u003cp\u003eThe ignition-protected rating is useful for gasoline-powered boats, and the IP66 rating helps when the switch is mounted in lockers, compartments, or areas that may see spray and washdown exposure. Final placement should still allow cable support, strain relief, and clear access to the selector knob.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":51551293538550,"sku":"APL228163-V0","price":63.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51551293571318,"sku":"APL228163-V1","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328778_apl228163.webp?v=1787811047"},{"product_id":"apl234347","title":"Blue Sea Systems Switch Meter Toggle SPTT ON-ON-ON, Battery Bank Selector, For Voltmeter or Multimeter","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 4141 is a switch meter toggle with SPTT ON-ON-ON action for selecting between battery banks when checking voltage with a digital or analog voltmeter or multimeter. It gives you three selectable positions at the panel, so one meter can be used to read different banks without moving test leads.\u003c\/p\u003e\u003cp\u003eThis layout works well on boats with separate start, house, and auxiliary batteries that need a clean way to compare bank voltage from one monitoring point. The switch includes a three-position battery bank label, and the unit weighs 0.02 lb (0.01 kg).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSPTT ON-ON-ON switch action for three-position battery bank selection on a meter circuit\u003c\/li\u003e\n\u003cli\u003eWorks with digital and analog voltmeters or multimeters\u003c\/li\u003e\n\u003cli\u003eLets one meter read multiple battery banks from the same panel location\u003c\/li\u003e\n\u003cli\u003eIncludes a three-position battery bank label for clear bank identification\u003c\/li\u003e\n\u003cli\u003eLow 0.02 lb (0.01 kg) weight for compact monitoring layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis switch is meant for battery monitoring circuits where one meter is shared across more than one bank. That makes it a practical fit for older helm panels with analog meters and for newer custom panels built around digital voltage checks.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that want quick battery status checks before departure, while charging, or when managing separate banks at anchor. Placing it next to the meter keeps bank selection and voltage reading in one spot, which makes routine checks faster and easier to follow.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551352946934,"sku":"APL234347","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369507_apl234347_jpeg.jpg?v=1787811431"},{"product_id":"apl394770","title":"Blue Sea Systems 360 Panel M2 Monitor Panel Blank, For M2 Monitors, 1 x 1","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1525 is a 1 x 1 360 Panel System module that mounts an M2 Monitor and matches existing 360 panels. Its listed size is 4.75 in high by 4.88 in wide, which gives you a clear reference when planning panel space or replacing another 360 module in the same layout.\u003c\/p\u003e\u003cp\u003eIt fits boats that already use the Blue Sea Systems 360 panel platform and want M2 monitoring in the same panel line as the rest of the electrical controls. It works with Blue Sea Systems M2 monitor models 1830, 1832, 1833, 1836, 1837, and 1838, covering common AC and DC monitoring functions in one consistent panel format.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 x 1 module format for the Blue Sea Systems 360 Panel System\u003c\/li\u003e\n\u003cli\u003eMade to mount an M2 Monitor within the 360 panel layout\u003c\/li\u003e\n\u003cli\u003eMatches existing 360 panels for a uniform look across the electrical panel\u003c\/li\u003e\n\u003cli\u003eListed dimensions of 4.75 in x 4.88 in help when checking available panel space\u003c\/li\u003e\n\u003cli\u003eCompatible with Blue Sea Systems M2 models 1830, 1832, 1833, 1836, 1837, and 1838\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module makes sense where the electrical panel is already based on the 360 Panel System. The key fit point is the M2 monitor family rather than a generic round or rectangular meter cutout, so it helps keep the panel layout consistent when adding battery, voltage, current, or AC system monitoring.\u003c\/p\u003e\u003cp\u003eOn board, that usually means the main electrical panel, helm, or nav station where the display can be read quickly and the surrounding panel hardware already follows the 360 format. For a refit, the 1 x 1 module size and listed face dimensions make it easier to compare against the space you have before cutting or rearranging the panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners building out a cleaner monitoring panel for battery banks, charging systems, inverter or shore power checks, or general AC and DC status. It also suits panel upgrades where the goal is to bring an M2 display into the same organized panel area instead of mounting a separate monitor elsewhere on the boat.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551652020470,"sku":"APL394770","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322665_apl394770.jpg?v=1787812263"},{"product_id":"apl693206","title":"Blue Sea Systems SMS Enclosure Gland, PG7, for #14 to #10 Wire","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 3124 is a small PG7 cable gland for one #14 to #10 wire in the SMS Surface Mount System. It fits cable outside diameters from 0.114 to 0.250 in. (2.9 to 6.4 mm) and uses a 0.492 in. (12.5 mm) clearance hole, so it is sized for small single-wire entries rather than larger jacketed cable runs.\u003c\/p\u003e\u003cp\u003eThis gland is used when a single conductor needs to pass through the wall of an SMS enclosure without leaving a loose opening around the wire. In marine electrical work that matters when the enclosure is mounted in places such as a machine space, lazarette, or shore cord storage compartment, where the cable entry needs to stay controlled and properly sealed. It is used with Blue Sea Systems SMS enclosure applications including part numbers 3116 and 3119.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePG7 gland sized for one #14 to #10 wire.\u003c\/li\u003e\n\u003cli\u003eAccepts cable outside diameters from 0.114 to 0.250 in. (2.9 to 6.4 mm).\u003c\/li\u003e\n\u003cli\u003eRequires a 0.492 in. (12.5 mm) clearance hole for nonthreaded mounting.\u003c\/li\u003e\n\u003cli\u003eCompact body with 1.17 in. (29.7 mm) max overall length for enclosure installations with limited wall depth.\u003c\/li\u003e\n\u003cli\u003e0.59 in. (15.0 mm) wrenching flats for tightening during installation.\u003c\/li\u003e\n\u003cli\u003eUsed with Blue Sea Systems SMS enclosure setups, including 3116 and 3119.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit depends on cable outside diameter as much as conductor gauge. A wire may fall in the #14 to #10 range and still be too large or too small at the jacket for this gland, so the cable OD window of 0.114 to 0.250 in. is the measurement that matters most when confirming the seal. This version is for a single wire pass-through, not a bundled cable entry.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor SMS enclosure work, the gland is installed after drilling the correct clearance hole and tightening the sealing nut around the wire entry. Keeping gland entries on the bottom side of the enclosure is the usual approach on SMS installations because it helps preserve the enclosure seal as the cable run drops into the box.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes sense for refits, service work, and panel changes where an SMS enclosure needs one more single-conductor entry without opening a larger cable hole than necessary. It is a good fit for boat owners and installers working on Blue Sea SMS enclosures in utility spaces where clean wire routing and a sealed pass-through matter.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51551829721334,"sku":"APL693206","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369489_apl693206_jpeg.jpg?v=1787812811"},{"product_id":"apl886201","title":"Blue Sea Systems ATO\/ATC Fuse, 32V DC, 1000A Interrupt Capacity, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems ATO\/ATC Fuse is a fast-acting blade fuse for DC circuit protection in marine electrical panels, fuse blocks, and accessory circuits that use the common ATO\/ATC format. It is available across a 1A to 40A amperage range, with a maximum voltage rating of 32V DC and a 1000A interrupt capacity.\u003c\/p\u003e\u003cp\u003eThis fuse is a practical replacement or spare for protecting electronics and other small DC loads on board. The tin-plated connector blades help resist corrosion at the contact points, which matters in damp lockers, consoles, cabins, and other areas where marine wiring sees humidity and vibration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFast-acting ATO\/ATC blade fuse for protecting electronics and DC branch circuits.\u003c\/li\u003e\n\u003cli\u003eAvailable in amperage ratings from 1A to 40A for matching the fuse to the protected circuit.\u003c\/li\u003e\n\u003cli\u003eRated for up to 32V DC, making it suitable for common 12V and 24V boat electrical systems.\u003c\/li\u003e\n\u003cli\u003e1000A interrupt capacity for handling fault current within its rated limits.\u003c\/li\u003e\n\u003cli\u003eTin-plated connector blades help reduce corrosion at the fuse holder contacts.\u003c\/li\u003e\n\u003cli\u003eVisible blown-fuse indication makes troubleshooting faster at the panel or fuse block.\u003c\/li\u003e\n\u003cli\u003eFits ATO\/ATC fuse holders and Blue Sea Systems blade-fuse panels that use this fuse format.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis fuse range varies by amperage only. The available ratings cover 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, and 40A circuits, so the correct version should match the circuit protection value specified for the connected equipment and wire size.\u003c\/p\u003e\u003cp\u003eThe ATO\/ATC blade format, 32V DC maximum voltage rating, tin-plated connector blades, and 1000A interrupt capacity remain consistent across the range. The amperage rating is the key selection point when replacing a blown fuse or stocking spares for a boat electrical panel.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this fuse only in holders, panels, or fuse blocks made for ATO\/ATC blade fuses. Before installation, confirm the required amperage on the equipment label, wiring diagram, fuse block cover, or service documentation. Replacing a fuse with a higher rating than specified can leave wiring or equipment without proper protection.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThese fuses are well suited for organized spare-fuse kits, helm panels, electronics circuits, cabin accessories, and other DC loads where the ATO\/ATC size is already in use. They are a good match for boat owners, installers, and refit projects that need consistent blade-style circuit protection across multiple amperage values.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo ATO\/ATC blade fuses in the selected amperage\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"10A","offer_id":51551850234102,"sku":"APL886201-V6","price":3.99,"currency_code":"USD","in_stock":true},{"title":"15A","offer_id":51551850266870,"sku":"APL886201-V4","price":3.99,"currency_code":"USD","in_stock":true},{"title":"7.5A","offer_id":51551850299638,"sku":"APL886201-V3","price":3.99,"currency_code":"USD","in_stock":true},{"title":"1A","offer_id":51551850332406,"sku":"APL886201-V2","price":3.99,"currency_code":"USD","in_stock":true},{"title":"5A","offer_id":51551850365174,"sku":"APL886201-V7","price":3.99,"currency_code":"USD","in_stock":true},{"title":"4A","offer_id":51551850397942,"sku":"APL886201-V8","price":3.99,"currency_code":"USD","in_stock":true},{"title":"3A","offer_id":51551850430710,"sku":"APL886201-V0","price":3.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":51551850463478,"sku":"APL886201-V72","price":3.99,"currency_code":"USD","in_stock":true},{"title":"2A","offer_id":51551850496246,"sku":"APL886201-V9","price":3.99,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":51551850529014,"sku":"APL886201-V47","price":3.99,"currency_code":"USD","in_stock":true},{"title":"25A","offer_id":51551850561782,"sku":"APL886201-V5","price":3.99,"currency_code":"USD","in_stock":true},{"title":"20A","offer_id":51551850594550,"sku":"APL886201-V1","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370086_apl886201_jpeg.jpg?v=1787812883"},{"product_id":"apl652514","title":"Blue Sea Systems 360 Panel System Branch Circuit Breaker Panel, 12V DC, 15A Flat Rocker Breakers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 360 Panel System is a 12V DC branch circuit breaker panel range for organizing and protecting onboard DC loads from a central distribution point.\u003c\/p\u003e\u003cp\u003eThese panels use A-Series flat rocker circuit breakers with 15A single-pole branch breakers installed, making them a practical fit for helm stations, navigation areas, cabin distribution panels, and electrical refit projects where labeled control of multiple DC circuits matters. The range shown here includes an 8-position vertical panel and a 16-position wide panel with analog voltage and current metering.\u003c\/p\u003e\u003cp\u003eThe 360 format uses an open frame with modular panel sections, so multiple functions can be grouped into one clean panel layout. It is intended for boats with 12V DC systems where the installer needs a finished panel rather than building a custom breaker layout from loose parts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC branch circuit breaker panel system for common marine DC distribution layouts.\u003c\/li\u003e\n\u003cli\u003eInstalled 15A A-Series flat rocker branch circuit breakers help protect individual DC loads and give each circuit a clear control point.\u003c\/li\u003e\n\u003cli\u003eAvailable in 8-position and 16-position configurations to match the number of circuits needed at the panel location.\u003c\/li\u003e\n\u003cli\u003eFlat rocker actuators give the panel a low-profile control surface and reduce accidental switching compared with protruding controls.\u003c\/li\u003e\n\u003cli\u003eSquare-format DC label kit is included for circuit identification during installation.\u003c\/li\u003e\n\u003cli\u003eOptional metering varies by configuration, with the 16-position version including analog voltage and current monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that differ by branch position count, metering, and panel layout.\u003c\/p\u003e\u003cp\u003eBoth variants are 12V DC 360 Panel System branch breaker panels with flat rocker branch breakers. The main difference is whether the installation needs a compact vertical panel with no meter section or a wider panel with 16 branch positions and analog monitoring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1201: 16 branch positions, analog voltmeter plus ammeter, large wide panel layout. This configuration suits larger DC panels where circuit count and at-a-glance system monitoring are both needed at the same location.\u003c\/li\u003e\n\u003cli\u003e1200: 8 branch positions, no metering, vertical panel layout. This configuration suits a narrower mounting space or a smaller DC distribution group where separate voltage or current metering is not required on the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the panel location around service access, cable routing, and the 3.00 in depth of the panel assembly. The 8-position version measures 7.75 in high by 4.88 in wide, while the 16-position version measures 7.75 in high by 13.63 in wide.\u003c\/p\u003e\u003cp\u003eAs with any DC distribution panel, conductor size, upstream protection, and the connected load on each breaker should be matched to the boat electrical plan. The maximum amperage differs by configuration, with the 8-position panel rated at 100A and the 16-position panel rated at 50A when installed with correctly sized wiring and overcurrent protection.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis panel range fits boats that need labeled control for navigation electronics, cabin lights, pumps, communication gear, accessories, and other 12V DC loads. It is especially useful during electrical refits where an older switch panel is being replaced with a breaker-based distribution layout.\u003c\/p\u003e\u003cp\u003eThe 1200 works well where space is limited and the circuit group is modest. The 1201 is better suited to larger helm or cabin distribution areas where the owner wants more branch positions and analog system checks without adding separate meter panels.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"None \/ Vertical \/ 8","offer_id":51552020758774,"sku":"APL652514-V2","price":611.99,"currency_code":"USD","in_stock":true},{"title":"Analog Voltmeter + Ammeter \/ Large Wide \/ 16","offer_id":51552020791542,"sku":"APL652514-V1","price":1503.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328953_apl652514.webp?v=1787813302"},{"product_id":"apl130308","title":"Blue Sea Systems Marine Grade Short Stop Circuit Breakers, 2500A @ 28V DC, IP64 Boot, Push-to-Reset","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Marine Grade Short Stop is a compact DC circuit breaker range for replacing fuses in low-voltage marine electrical circuits. It uses a thermal trip with manual reset, supports up to 28V DC, and has a 2,500A interrupt capacity at 28V DC, giving small branch circuits a resettable protection point without carrying spare fuses on board.\u003c\/p\u003e\u003cp\u003eThe breaker is made for exposed or semi-exposed boat wiring locations where spray, vibration, and corrosion are common concerns. An IP64 water-resistant boot helps protect against dust and splashing water, while stainless steel lock nuts help protect against dust and splashing water, while stainless steel lock nuts help keep terminal connections secure. The #10-32 terminal stud suits common marine ring-terminal installations when matched with the correct wire size, circuit load, and overcurrent protection plan.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThermal trip, manual-reset breaker that can be reset after a trip instead of replacing a blown fuse.\u003c\/li\u003e\n\u003cli\u003eRated for DC systems up to 28V DC, suitable for many 12V and 24V boat electrical installations.\u003c\/li\u003e\n\u003cli\u003e2,500A interrupt capacity at 28V DC for short-circuit protection within the breaker rating.\u003c\/li\u003e\n\u003cli\u003eIP64 boot helps protect the reset area from dust and splashing water in marine environments.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant construction with stainless steel lock nuts for exposed boat wiring areas.\u003c\/li\u003e\n\u003cli\u003e#10-32 terminal stud supports ring-terminal connections, with 20 in-lb terminal torque specified for installation.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range from -10°C to 60°C for common onboard electrical spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Short Stop breaker range varies by amperage, covering lower-load branch circuits through heavier DC loads. The amperage selection should match the protected wire size and the circuit requirements, not just the equipment draw, since the breaker’s main job is to protect the wiring.\u003c\/p\u003e\u003cp\u003eThe core construction and installation style stay consistent across the range, including the push-to-reset operation, 28V DC maximum voltage rating, #10-32 terminal stud, IP64 boot, and 2,500A interrupt capacity at 28V DC.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the breaker as close as practical to the power source for the circuit it protects, following the boat’s wiring layout and applicable marine electrical practices. Use properly crimped ring terminals on clean conductors, tighten the terminal hardware to the specified torque, and protect the wiring from chafe, heat, fuel exposure, and standing water.\u003c\/p\u003e\u003cp\u003eBecause this is a manual-reset breaker, it works well in locations where quick access matters, such as battery-adjacent accessory feeds, small distribution runs, and individual DC equipment circuits. After a trip, the circuit should be checked for overloads, shorts, or damaged wiring before resetting the breaker.\u003c\/p\u003e\u003ch6\u003eMarine use\u003c\/h6\u003e\u003cp\u003eThis range is a practical fit for boats that need resettable circuit protection without moving to a larger panel-mounted breaker. It suits small DC branch circuits in cockpits, consoles, helm wiring areas, equipment lockers, and other locations where a compact breaker can be mounted near the protected circuit.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eShort Stop circuit breaker\u003c\/li\u003e\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"25A","offer_id":51552118898934,"sku":"APL130308-V9","price":13.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":51552118931702,"sku":"APL130308-V1","price":13.99,"currency_code":"USD","in_stock":true},{"title":"50A","offer_id":51552118964470,"sku":"APL130308-V3","price":14.49,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":51552118997238,"sku":"APL130308-V4","price":13.99,"currency_code":"USD","in_stock":true},{"title":"20A","offer_id":51552119030006,"sku":"APL130308-V7","price":13.99,"currency_code":"USD","in_stock":true},{"title":"10A","offer_id":51552119062774,"sku":"APL130308-V6","price":13.99,"currency_code":"USD","in_stock":true},{"title":"15A","offer_id":51552119095542,"sku":"APL130308-V5","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370214_apl130308_jpeg.jpg?v=1787813604"},{"product_id":"apl228167","title":"Blue Sea Systems m-Series Selector 3 Position Battery Switch, 32V DC, 300A, IP66","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems m-Series Selector 3 Position Battery Switch is a manual battery selector for boats with two battery inputs and one shared load group. It is rated for 32V DC systems, with 300A continuous current, 500A for 5 minutes, and 900A starting current for 30 seconds, making it suitable for outboards and small gasoline or diesel engines.\u003c\/p\u003e\u003cp\u003eThis is a three-position selector switch, not a battery-combine model. It lets the operator feed onboard loads from one isolated battery bank or the other, while the OFF position allows the battery circuit to be shut down when the boat is stored, serviced, or left at the dock.\u003c\/p\u003e\u003cp\u003eThe m-Series format fits well in compact electrical layouts, battery compartments, and service panels where space, cable routing, and access all matter. Its IP66 rating, ignition protection, and tinned copper studs suit the wet, vibrating, and corrosive conditions found on marine electrical systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSelector 3-position battery switch for managing two isolated battery inputs feeding a common onboard load group.\u003c\/li\u003e\n\u003cli\u003e32V DC maximum voltage rating for common 12V and 24V marine electrical systems.\u003c\/li\u003e\n\u003cli\u003e300A continuous rating, 500A intermittent rating for 5 minutes, and 900A starting rating for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eIgnition protected for use aboard gasoline-powered boats where ignition protection is required.\u003c\/li\u003e\n\u003cli\u003eIP66 rating for resistance to spray and washdown exposure when installed in a suitable location.\u003c\/li\u003e\n\u003cli\u003eTinned copper 3\/8 in-16 (M10) terminal studs accept 3\/8 in ring terminals and support 4\/0 AWG cable sizing for the rated current.\u003c\/li\u003e\n\u003cli\u003eCase supports surface or rear panel mounting, with #10 mounting screw holes and 1.12 in cable clearance for 4\/0 AWG cable.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC requirements for battery switches, is UL Listed to UL 1107, and meets UL 1500 and SAE J1171 ignition protection requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis m-Series selector switch is offered in two color configurations for different battery compartment, panel, or helm-area layouts.\u003c\/p\u003e\u003cp\u003eBoth variants share the same selector function, current ratings, terminal stud size, ignition protection, IP66 rating, and 32V DC maximum voltage. The visible switch color is the key difference between the two options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6008: Red. The red case is easy to identify in a battery compartment or electrical panel, which can help during shutdown checks and service work.\u003c\/li\u003e\n\u003cli\u003e6008200: Black. The black case gives a more subdued look on dark panels or helm-area electrical layouts while keeping the same m-Series selector function.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eInstallation should be done with battery power isolated, and the positive battery terminal should be disconnected before mounting and wiring the switch. The terminal studs are intended for cable terminals mounted under the nut, with a specified torque of 120 in-lb (13.56 Nm).\u003c\/p\u003e\u003cp\u003eTo meet the published current ratings, use 4\/0 AWG cable where required by the installation. Cable size, run length, circuit protection, and routing should match the boat electrical plan and the latest applicable marine electrical standards.\u003c\/p\u003e\u003ch6\u003eElectrical integration\u003c\/h6\u003e\u003cp\u003eThis switch is useful where the boat has two battery banks and the operator needs manual control over which bank feeds the loads. It does not include alternator field disconnect and it is not a combine switch, so it should be wired as a selector for isolated banks rather than as a paralleling device.\u003c\/p\u003e\u003cp\u003eThe switch should not be turned to OFF while the engine is running. In real use, that makes it better suited for deliberate battery selection before starting, after shutdown, during service, or when securing the vessel at the dock.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis product is a good match for small powerboats, fishing boats, center consoles, and auxiliary battery systems where a simple manual selector is preferred over automatic battery management. It gives the operator direct control of the battery source without adding networked controls or electronic switching modules.\u003c\/p\u003e\u003cp\u003eIts combination of high current ratings, ignition protection, and marine-rated construction makes it practical for battery compartments, engine-adjacent service areas, and other locations where salt air, vibration, and occasional washdown exposure are part of normal boat life.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Black","offer_id":51552192463094,"sku":"APL228167-V2","price":65.99,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51552192495862,"sku":"APL228167-V1","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328825_apl228167.webp?v=1787813927"},{"product_id":"apl782834","title":"Blue Sea Systems 360 Panel 8-Position DC Branch Circuit Breaker Panel, 12V, M2 Multimeter with SOC, Dual USB 4.8A, 12V Dash Socket, 100A","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 1497 is a 12V DC branch circuit breaker panel with eight positions, an integrated M2 Multimeter with state of charge display, a dual USB charger, and a 12V dash socket. It is built to take one higher-amperage DC feed and split it into protected branch circuits, with a maximum panel rating of 100A. The panel measures 7.75 x 9.25 x 4 inches, which gives you a useful planning number for helm, cabin, or electrical locker installations where depth matters as much as face size.\u003c\/p\u003e\u003cp\u003eThis layout makes sense when you want circuit protection, battery information, and charging outlets in one place instead of scattering separate pieces around the boat. The M2 section adds battery state of charge monitoring and multimeter functions, while the USB and 12V socket give you power for handheld electronics at the helm or nav station.\u003c\/p\u003e\u003cp\u003eIt is part of the Panel 360 range, so the layout groups multiple functions into one panel frame. On a cruising boat, fishing boat, or sailboat with limited dash space, that can make the electrical area easier to wire, label, and live with day to day.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEight 15A A-Series flat rocker breakers for switched and protected 12V branch circuits\u003c\/li\u003e\n\u003cli\u003e100A maximum panel amperage for the main DC feed into the panel\u003c\/li\u003e\n\u003cli\u003eM2 Multimeter with state of charge display for battery monitoring at the panel\u003c\/li\u003e\n\u003cli\u003eDual USB charger rated at 4.8A total output for phones, tablets, and other onboard devices\u003c\/li\u003e\n\u003cli\u003eIntegrated 12V dash socket for accessories that still use a standard marine 12V plug\u003c\/li\u003e\n\u003cli\u003eON-indicating LEDs and backlit label positions for quick circuit identification in low light\u003c\/li\u003e\n\u003cli\u003ePanel size of 7.75 x 9.25 x 4 inches for fit checks before cutting or reworking a console panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis panel is intended for 12V DC systems where you need a central point for accessory and service circuits. The eight installed breakers are 15A models, so branch loads and wire sizes need to be matched to each circuit rather than treated as a one-size-fits-all panel. The upstream feed, main protection, and cable sizing should also be planned around the total load on the panel, not just the number of switch positions.\u003c\/p\u003e\u003cp\u003eThe M2 state of charge function is useful when battery status matters at a glance, but it needs the battery monitor side of the system to be set up correctly so the readings are meaningful. That matters on boats that spend time on the hook, run house loads for long periods, or depend on battery reserve for electronics and lighting.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe integrated USB charger accepts 12V or 24V input at the charger module, while the panel itself is a nominal 12V assembly. The 12V dash socket remains a standard 12V outlet, so this panel fits best where the vessel uses 12V accessory power and you want both modern USB charging and a traditional socket in the same space.\u003c\/p\u003e\u003cp\u003eFor buyers comparing panel options, the main fit questions are panel opening size, behind-panel depth, total branch load, and whether eight protected circuits cover the equipment you want to bring onto this section of the boat. It is a good match for helm panels, navigation stations, and service panels where battery data and accessory charging need to stay close at hand.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlue Sea Systems 1497 panel\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51552193216758,"sku":"APL782834","price":1352.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369346_apl782834_jpeg.jpg?v=1787813954"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/4666b969-f0c0-4027-9072-1892fac2379b.webp?v=1787791311","url":"https:\/\/www.apollolighting.com\/collections\/brand-blue-sea-systems.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}