{"title":"Garmin","description":"","products":[{"product_id":"apl001570","title":"Garmin Trolling Motor Barrel Mount, For Panoptix LVS32, Fits All Barrel Diameters","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12784-00 is a trolling motor barrel mount kit for the Panoptix LiveScope LVS32 transducer, letting you secure the transducer to the barrel section of your trolling motor.\u003c\/p\u003e\u003cp\u003eThe molded-tooth adjustment indexes the mount to different barrel diameters, so it can be set up on a wide range of trolling motors, including many Minn Kota and MotorGuide models.\u003c\/p\u003e\u003cp\u003eThis is a mounting accessory only. It does not change your sonar electronics or wiring, it simply gives you a clean, repeatable way to position the LVS32 on the trolling motor assembly at the bow.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for mounting a Panoptix LiveScope LVS32 (LVS32) transducer on a trolling motor barrel\u003c\/li\u003e\n\u003cli\u003eMolded-tooth adjustment helps match the mount to different barrel diameters\u003c\/li\u003e\n\u003cli\u003eFits a wide range of trolling motor barrel sizes, including common Minn Kota and MotorGuide barrels\u003c\/li\u003e\n\u003cli\u003eBarrel-mount location keeps the transducer moving with trolling motor steering during real-time viewing\u003c\/li\u003e\n\u003cli\u003eUseful when you want the transducer on the barrel rather than on the shaft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this mount with the Panoptix LiveScope LVS32 transducer. It is not a universal transducer bracket, so verify the transducer model before ordering.\u003c\/p\u003e\u003cp\u003eThe mount attaches to the barrel portion of a trolling motor. Confirm your motor has a suitable barrel section and that the transducer will clear the lower unit, prop, and skeg through the full steering range.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSet the mount on the trolling motor barrel, adjust the molded teeth for a snug fit, and secure it so it cannot rotate under thrust or when the motor is stowed. Once the mount is fixed, attach the LVS32 in the correct orientation for your viewing mode.\u003c\/p\u003e\u003cp\u003eRoute the transducer cable so it cannot pinch when deploying or stowing the trolling motor. Leave a small service loop for steering movement, and secure the cable to avoid chafe from spray, vibration, or contact with the shaft and mount points.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount is a good match for anglers running LiveScope from the bow who want the LVS32 to follow the trolling motor direction while casting, jigging, or tracking structure in shallow water.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550276321526,"sku":"APL001570","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695546_apl001570_jpeg.jpg?v=1787789407"},{"product_id":"apl123855","title":"Garmin ECHOMAP Ultra 2 Flush Mount Kit, Size-Specific","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin Flush Mount Kit is a size-matched mounting kit that lets a compatible ECHOMAP Ultra chartplotter sit flush in a helm panel or other flat surface. It is offered for 10-inch, 12-inch, and 16-inch displays, with the cutout and hardware matched to the screen size so the unit sits cleanly in the dash instead of on a bracket.\u003c\/p\u003e\u003cp\u003eFlush mounting is a good fit for center consoles, pilothouses, and electronics boxes where you want a low-profile face that is easier to wipe down and less likely to get bumped by knees, rods, or lines. Plan your install with enough clearance behind the panel for cable bends and service access before cutting the opening.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount style install for compatible Garmin ECHOMAP Ultra chartplotters on most flat boat surfaces\u003c\/li\u003e\n\u003cli\u003eSize-specific options for 10-inch, 12-inch, and 16-inch displays so the cutout and face fit the unit frame\u003c\/li\u003e\n\u003cli\u003eIncludes a cutout template to help lay out the opening before you drill and cut\u003c\/li\u003e\n\u003cli\u003eMounting hardware is included for securing the chartplotter to the panel\u003c\/li\u003e\n\u003cli\u003eWorks well in tight helm layouts where a bracket mount would protrude into the cockpit or walkway\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple sizes to match different ECHOMAP Ultra display formats.\u003c\/p\u003e\u003cp\u003eThe screen size is what changes between versions, along with the matching panel cutout and mounting layout. Hardware, installation instructions, and a template are included with each size kit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-12841-03: Size 10-inch. Used for ECHOMAP Ultra 102sv\/106sv and ECHOMAP Ultra 2 10-inch chartplotters, with the cutout and fasteners sized for that frame.\u003c\/li\u003e\n\u003cli\u003e010-12842-03: Size 12-inch. Used for ECHOMAP Ultra 122sv\/126sv and ECHOMAP Ultra 2 12-inch chartplotters, with the cutout and mounting layout matched to the 12-inch face.\u003c\/li\u003e\n\u003cli\u003e010-13352-13: Size 16-inch. Used for ECHOMAP Ultra 2 16-inch chartplotters, with the panel opening and mount pattern matched to the larger chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eMounting template\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eStart by choosing a flat mounting area with enough room behind the panel for connectors and cable routing. Use the included template to mark the cutout and fastener locations, then drill pilot holes and cut the opening carefully.\u003c\/p\u003e\u003cp\u003eOn cored fiberglass panels, sealing the raw cut edges helps keep moisture out of the laminate. After the unit is seated and fastened, confirm the display face sits evenly against the panel and that the keypad and card access (if applicable) remain usable.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is determined by the chartplotter screen size and model family, not just the diagonal measurement you prefer at the helm. Match the kit size to your ECHOMAP Ultra unit: 10-inch kits cover 102sv and 106sv formats, 12-inch kits cover 122sv and 126sv formats, and the 16-inch kit is for ECHOMAP Ultra 2 16-inch units.\u003c\/p\u003e\u003cp\u003eThis kit is a good match for boaters who already know where they want the chartplotter mounted and need a clean, flush install in a dash, helm pod, or electronics enclosure.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12\"","offer_id":51550279631094,"sku":"APL123855-V2","price":24.99,"currency_code":"USD","in_stock":false},{"title":"10\"","offer_id":51550279663862,"sku":"APL123855-V1","price":24.99,"currency_code":"USD","in_stock":false},{"title":"16\"","offer_id":51550279696630,"sku":"APL123855-V3","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281806_apl123855.webp?v=1787789614"},{"product_id":"apl652411","title":"Garmin MotorGuide Trolling Motor Transducer Adapter Cable, 4-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11979-00 is an adapter cable that connects a MotorGuide trolling motor transducer to a compatible Garmin fishfinder or chartplotter that uses a 4-pin transducer port. It is used when your transducer is mounted in or on the trolling motor and you want that sonar feed to appear on the Garmin display without cutting or splicing wiring.\u003c\/p\u003e\u003cp\u003eThis cable is the correct fit for Garmin units that use the 4-pin transducer connector, including families such as echo, ECHOMAP CHIRP 4x and 5x, ECHOMAP Plus 4x and 6x, ECHOMAP UHD 6x, STRIKER, STRIKER Plus, and STRIKER Vivid. On the trolling motor side, it mates to MotorGuide setups that use the MotorGuide transducer connection commonly found on sonar-equipped models.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects a MotorGuide trolling motor transducer to a Garmin 4-pin transducer port\u003c\/li\u003e\n\u003cli\u003eSupports Garmin fishfinders and chartplotters that use the 4-pin transducer connector\u003c\/li\u003e\n\u003cli\u003eUseful for keeping sonar on the trolling motor transducer while running a Garmin display at the console or bow\u003c\/li\u003e\n\u003cli\u003eAdapter-style cable for a clean install without modifying factory plugs\u003c\/li\u003e\n\u003cli\u003eCommonly used with sonar-equipped MotorGuide trolling motors such as Tour, Wireless Sonar, and Xi5 configurations that use the MotorGuide transducer connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector on the back of your Garmin unit before ordering. This adapter is for Garmin devices with a 4-pin transducer port, not 8-pin or 12-pin transducer ports. On the MotorGuide side, confirm that your trolling motor transducer lead uses the MotorGuide plug style intended for fishfinder integration.\u003c\/p\u003e\u003cp\u003eIf your boat has both a transom transducer and a trolling motor transducer, this adapter is typically used to bring the trolling motor transducer into the Garmin unit when you are fishing from the bow and want the sonar to track with the motor direction.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward: connect the MotorGuide transducer lead to the adapter, then connect the Garmin end to the unit’s 4-pin transducer port. Route the cable so it will not be pinched during stow and deploy, and leave enough slack for steering movement at the trolling motor head.\u003c\/p\u003e\u003cp\u003eFor clean sonar performance, keep the transducer cable run separated from high-current trolling motor power wiring when possible. Secure the cable with gentle strain relief and allow a drip loop near connections to reduce water migration into plugs during spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for anglers running a Garmin display at the bow and a MotorGuide trolling motor with an integrated or trolling-motor-mounted transducer. It is also helpful on smaller fishing boats where you want to keep the install tidy and avoid changing out transducers just to match connector styles.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550282154230,"sku":"APL652411","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694277_apl652411_jpeg.jpg?v=1787789680"},{"product_id":"apl739279","title":"Garmin GPSMAP 943 GN+ Chartplotter, Non-Sonar, 9 in Touchscreen, US\/Canada Navionics+ Charts, 10 Hz GNSS, NMEA 2000, NMEA 0183, Wi-Fi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02366-60 is a 9-inch GPS chartplotter with built-in Garmin Navionics+ mapping and a 1280 x 720 touchscreen display. It uses a 10 Hz GNSS receiver (GPS, GLONASS, and Galileo) so position and course data stay smooth when you are threading channels or running offshore in a chop.\u003c\/p\u003e\u003cp\u003ePower is 10 to 32 Vdc with a 6 A fast-acting fuse, and typical draw is about 1.34 A at 12 Vdc. The unit is rated IPX7 and its case combines polycarbonate plastic with die-cast aluminum. Physical size is 233.0 x 162.3 x 75.8 mm (9 3\/16 x 6 3\/8 x 3 in.).\u003c\/p\u003e\u003cp\u003eThis is a non-sonar chartplotter. If you want sonar views, it supports compatible external sonar black boxes and transducers, and it can be built into a helm system with other compatible networked electronics.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-inch touchscreen with 1280 x 720 resolution for clear chart detail and readable split screens\u003c\/li\u003e\n\u003cli\u003ePreloaded Garmin Navionics+ charts for U.S. and Canada coverage, including Auto Guidance+ route suggestions and a 1-year subscription for downloadable daily updates through the ActiveCaptain app\u003c\/li\u003e\n\u003cli\u003e10 Hz GNSS positioning (GPS, GLONASS, and Galileo) for fast updates while underway\u003c\/li\u003e\n\u003cli\u003eNetworking support for NMEA 2000, NMEA 0183, J1939 engine data, Garmin Marine Network, and Wi-Fi\u003c\/li\u003e\n\u003cli\u003eRuns on 10 to 32 Vdc with a 6 A fast-acting fuse; typical draw is about 1.34 A at 12 Vdc\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating; temperature range from -15 to 55 C (5 to 131 F)\u003c\/li\u003e\n\u003cli\u003eTwo microSD card slots (up to 32 GB each) for charts, updates, and saved data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGPSMAP 943 GN+ chartplotter\u003c\/li\u003e\n\u003cli\u003emicroSD card (preinstalled)\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 drop cable\u003c\/li\u003e\n\u003cli\u003eBail mount with knobs\u003c\/li\u003e\n\u003cli\u003eFlush mount kit with gasket\u003c\/li\u003e\n\u003cli\u003eProtective cover\u003c\/li\u003e\n\u003cli\u003eTrim piece snap covers\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit supports bail mounting, flush mounting, or flat mounting, which helps when you are replacing an older display and trying to match an existing cutout or bracket. Leave space behind the unit for connector depth and cable bend radius, and keep the microSD slots in mind if you will not have easy access after a flush install.\u003c\/p\u003e\u003cp\u003eUse marine sealant around the cutout to keep water from migrating behind the dash, and keep the weather caps on any unused ports to slow down corrosion in damp consoles. Compass-safe distance is 30 cm, which matters when the magnetic compass is close to the helm pod.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eNMEA 2000 is supported for sharing navigation and sensor data, but the display is not powered through the NMEA 2000 backbone. Connect it to a dedicated 10 to 32 Vdc supply using the power harness; NMEA 2000 draw is 75 mA max (LEN 2).\u003c\/p\u003e\u003cp\u003eFor older devices, the NMEA 0183 port provides one differential input and one differential output. For engine gateways and compatible engines, the J1939 port supports engine data, and the connection is typically made with an accessory cable intended for the marine environment.\u003c\/p\u003e\u003ch6\u003eOn-board fit and use\u003c\/h6\u003e\u003cp\u003eThis model makes sense on center consoles, express cruisers, and sportfish boats where a chartplotter needs to act as the hub for charts and networked data at the helm. It is also a good match when you want built-in Navionics+ mapping now, with room to expand later with compatible radar, autopilot, AIS, cameras, and other helm add-ons.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550286577910,"sku":"APL739279","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696187_apl739279_jpeg.jpg?v=1787789728"},{"product_id":"apl711492","title":"Garmin B164-12 Bronze Thru-Hull Transducer, 12° Tilt, 1kW, 50\/200 kHz, Depth\/Temp, 6-Pin Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11010-01 is a 1 kW through-hull, tilted-element transducer with a 6-pin connector for traditional 50\/200 kHz sonar and built-in depth and water-temperature sensing. It’s a low-profile bronze unit that sits nearly flush, with the housing extending less than 6.35 mm (0.25 in) below the hull.\u003c\/p\u003e\u003cp\u003eThis 12° tilted version is meant to match hull deadrise angles from 8° to 15° so the sonar beam points straight down without a fairing block. It installs through a 95 mm (3-3\/4 in) hole, uses a 71 mm (2.80 in) usable shaft length, and comes with a 39 ft cable for reaching the sounder location on many center consoles and offshore fishing boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 kW dual-frequency sonar element (50\/200 kHz) for a wide low-frequency view and a tighter high-frequency beam\u003c\/li\u003e\n\u003cli\u003eFixed 12° tilted element for 8° to 15° hull deadrise angles\u003c\/li\u003e\n\u003cli\u003eLow-profile bronze through-hull housing that extends less than 6.35 mm (0.25 in) below the hull\u003c\/li\u003e\n\u003cli\u003eDepth and fast-response water-temperature sensing in one transducer\u003c\/li\u003e\n\u003cli\u003e6-pin connector with a 39 ft cable for direct connection to compatible Garmin sonar ports\u003c\/li\u003e\n\u003cli\u003eRequires a 95 mm (3-3\/4 in) through-hull hole; non-retractable housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is the bronze housing version listed for fiberglass or wood hulls. The 12° tilt is the key fit item: it’s intended for boats with an 8° to 15° deadrise where you want the transducer face angled internally rather than relying on an external fairing.\u003c\/p\u003e\u003cp\u003eOn the electronics side, match it to a sounder that supports 50\/200 kHz and can drive a 1 kW transducer, with a transducer port that accepts the Garmin 6-pin connection.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location for clean water flow at speed and enough interior clearance to access the retaining nut and cable routing. A 95 mm (3-3\/4 in) hole is a large cutout, so many installs are handled during haul-out with careful measuring, proper bedding, and attention to corrosion control for a bronze fitting in a saltwater environment.\u003c\/p\u003e\u003cp\u003eOnce installed, route the 39 ft cable away from ignition wiring and high-current runs where practical, then secure it so it cannot chafe in bilges or rigging tubes. After the first few trips, recheck the inside nut area and the seal for any sign of weeping.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style of low-profile, no-fairing through-hull is a common pick for fast, trailered fishing boats that need a 1 kW transducer without leaving a tall housing exposed under the hull. It’s also a good fit when you want traditional 50 kHz for depth holding and 200 kHz for clearer target detail while working structure, reefs, and bait schools.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the outside face clear of heavy growth, which can soften returns and temperature response. If antifouling is used near the transducer, use products and prep methods that are appropriate for transducers so the acoustic window is not compromised.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550286807286,"sku":"APL711492","price":1275.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694094_apl711492_jpeg.jpg?v=1787789779"},{"product_id":"apl636338","title":"Garmin - Power Cable - 8-Pin, for echoMAP Series \u0026 GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11970-00 is an 8-pin power\/data cable that connects select echoMAP and GPSMAP chartplotters to DC power and to NMEA 0183 wiring.\u003c\/p\u003e\u003cp\u003eAt 6 ft (about 1.8 m) long, it has an 8-pin plug on the display end and bare wire leads on the other end for a clean hardwired install behind the helm or at a nav station. Along with power, the lead set supports NMEA 0183 input and output and can be used to trigger a lamp or horn for visible or audible alerts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-foot (about 1.8 m) cable for typical helm runs\u003c\/li\u003e\n\u003cli\u003e8-pin connector to bare wire leads for straightforward hardwiring\u003c\/li\u003e\n\u003cli\u003eCarries power and NMEA 0183 input\/output on one harness\u003c\/li\u003e\n\u003cli\u003eSupports connection to an external lamp or horn for chartplotter alerts\u003c\/li\u003e\n\u003cli\u003eHelpful when replacing a display and keeping existing NMEA 0183 wiring in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used on chartplotters with the Garmin 8-pin power\/data port. Confirm the port style on the back of your display before ordering.\u003c\/p\u003e\u003cp\u003eCompatible models include echoMAP 50dv, echoMAP 50s, echoMAP 70dv, echoMAP 70s, GPSMAP 527xs, GPSMAP 547, GPSMAP 547xs, GPSMAP 741, and GPSMAP 741xs. It is not compatible with echoMAP CHIRP versions.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect the power leads to a clean, properly fused DC feed and keep the run as short as practical to limit voltage drop. For longer runs, extend using marine-grade wire sized for the distance and the current draw of your chartplotter.\u003c\/p\u003e\u003cp\u003eThe NMEA 0183 conductors can be tied into other NMEA 0183 equipment such as a VHF radio or AIS device when your wiring plan calls for it. Match talker and listener connections carefully and keep splices supported and dry inside the console.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with strain relief at the display, avoid sharp bends, and keep it separated from ignition wiring, high-current battery cables, and sources of heat. Leave a small service loop so the unit can be pulled forward for future access.\u003c\/p\u003e\u003cp\u003eTerminate bare leads with adhesive-lined heat-shrink connectors and mount any splices where they will not sit in water or collect condensation. On open boats, protect the harness with loom or conduit where it passes through bulkheads and fiberglass.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis harness fits common installs at the helm, refits where you are keeping an existing NMEA 0183 network, and setups that use an external alarm indicator that can be seen or heard on deck.\u003c\/p\u003e\u003cp\u003eIt suits boaters who want a direct hardwired power connection and still need NMEA 0183 data wiring and alert wiring without adding separate adapters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, inspect the plug and terminations for corrosion and for chafe where the harness is tied into the boat. Re-seat the connector if you notice intermittent power or data issues, and replace any terminals that show corrosion inside the crimp.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550294704374,"sku":"APL636338","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694273_apl636338_jpeg.jpg?v=1787790016"},{"product_id":"apl115461","title":"Garmin Steer-by-Wire Interconnect Cable, 3 m, For GHP Reactor Autopilot CCU, Bare Wire Buzzer Connections","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11351-50 is a 3 m interconnect cable that links a Garmin Reactor autopilot CCU (course computer unit) to a steer-by-wire controller.\u003c\/p\u003e\u003cp\u003eUse it when your boat has steer-by-wire steering and the autopilot needs the dedicated CCU-to-controller connection for steering commands and feedback.\u003c\/p\u003e\u003cp\u003eThe harness also includes bare-wire leads intended for a buzzer connection, which can be integrated into an audible alarm circuit if your installation uses one.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 m (about 10 ft) length for typical helm-to-controller or console runs\u003c\/li\u003e\n\u003cli\u003eUsed to connect a Reactor autopilot CCU (course computer unit) to a steer-by-wire controller\u003c\/li\u003e\n\u003cli\u003eBare-wire leads provided for a buzzer connection\u003c\/li\u003e\n\u003cli\u003eSingle dedicated interconnect harness that keeps the CCU-to-controller wiring straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used between the Reactor autopilot CCU and a steer-by-wire controller. It is not a general-purpose power lead or a network backbone cable.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your steering is steer-by-wire (not a hydraulic pump drive) and that both the CCU and the steer-by-wire controller have the matching interconnect ports for this harness.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the routing from the CCU mounting location to the steer-by-wire controller and verify the 3 m length covers the full run with a little service slack. Keep the cable away from sharp edges, moving linkages, and high-heat areas, and add chafe protection where it passes through bulkheads.\u003c\/p\u003e\u003cp\u003eIn helm or console spaces, secure the run so vibration does not work the connectors loose over time, and keep connection points above areas that can collect spray or bilge water.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis interconnect is a common need on boats with steer-by-wire where the CCU is mounted inside a console and the steer-by-wire controller is located near the helm. It also fits repowers and refits where the existing harness is too short, damaged, or missing.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550308958454,"sku":"APL115461","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696709_apl115461_jpeg.jpg?v=1787790551"},{"product_id":"apl222314","title":"Garmin GPSMAP 8x10 Trim Piece Snap Cover, For 8410\/8410XSV\/8610\/8610XSV","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12800-00 is a snap-on trim piece cover used to finish off a Garmin glass helm installation on select GPSMAP 8x10 chartplotters. It fits GPSMAP 8410, GPSMAP 8410xsv, GPSMAP 8610, and GPSMAP 8610xsv units.\u003c\/p\u003e\u003cp\u003eThis is a small cosmetic and protective part that covers the trim area so the helm cutout looks tidy and the edges are not left exposed. It is not a sun cover for the screen and it does not connect to power or the marine network.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSnap-on trim cover for Garmin glass helm installs on GPSMAP 8x10 chartplotters\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 8410, 8410xsv, 8610, and 8610xsv\u003c\/li\u003e\n\u003cli\u003eHelps restore a clean helm finish when trim pieces are missing, scuffed, or damaged\u003c\/li\u003e\n\u003cli\u003eNo wiring, no software setup, and no impact on electronics or network integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is model-specific, so confirm your chartplotter model number on the unit label or in the system information menu before ordering. This trim piece cover is for GPSMAP 8410 and 8610 series units (including xsv versions) and is not interchangeable with other GPSMAP sizes such as 8x12 or 8x16.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is a simple snap-on fit. Dry-fit the cover first, then align it with the trim area on the glass helm and press evenly until it seats.\u003c\/p\u003e\u003cp\u003eIf you ever need to remove it for service or to rework the panel, work gently from an edge and avoid metal tools that can chip gelcoat or scratch the helm surface.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and grime off during normal washdowns and wipe with mild soap and water. Avoid strong solvents that can haze plastics or soften finishes around the helm.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550310433014,"sku":"APL222314","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697287_apl222314_jpeg.jpg?v=1787790595"},{"product_id":"apl419670","title":"Garmin GPSMAP 9000 Series Premium Chartplotter, BlueNet, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin GPSMAP 9000 series is a fully integrated touchscreen chartplotter line for glass-helm installs, offered in 10, 13, 17, 19, 22, 24, and 27-inch displays.\u003c\/p\u003e\u003cp\u003eOn 10-inch and 13-inch models you get an HD touchscreen; 17-inch and larger units step up to a 4K IPS touchscreen. Across the range, processing power is rated up to 7 times faster than the previous generation, and the housing is IPX7 water-resistant for open-helm spray and routine washdowns.\u003c\/p\u003e\u003cp\u003eThese displays sit at the center of a connected helm. They support Garmin BlueNet with gigabit networking, plus NMEA 2000 and NMEA 0183 for tying in autopilot control, sensors, AIS, and engine gateways. Variants are available as chartplotter-only or with built-in sonar, and with either a worldwide basemap or built-in Garmin Navionics+ mapping.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDisplay size options from 10-inch through 27-inch to match console space and viewing distance\u003c\/li\u003e\n\u003cli\u003eHD touchscreen on 10-inch and 13-inch models; 4K IPS touchscreen on 17-inch and larger models\u003c\/li\u003e\n\u003cli\u003eGarmin BlueNet support with gigabit networking for multi-display helms and shared accessories\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 and NMEA 0183 connectivity for integrating autopilot, sensors, AIS, VHF, and engine data interfaces\u003c\/li\u003e\n\u003cli\u003e5 GHz Wi-Fi support for fast wireless updates and mobile integration through the ActiveCaptain app\u003c\/li\u003e\n\u003cli\u003eIPX7 water-resistance rating for wet helms, salt spray, and washdowns\u003c\/li\u003e\n\u003cli\u003eVideo integration support with HDCP distribution for bringing compatible video sources onto the helm\u003c\/li\u003e\n\u003cli\u003eConfigurations offered with built-in sonar or as chartplotter-only, depending on how you build your sounder system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product range is offered in multiple configurations that change three things: display size, the chart package, and whether the unit includes built-in sonar.\u003c\/p\u003e\u003cp\u003eChart options are either a worldwide basemap or built-in Garmin Navionics+. Sonar options are listed as Yes or No; sonar-enabled units accept a compatible transducer directly at the display, while non-sonar versions are used with external sonar sources if you want sounder data on screen.\u003c\/p\u003e\u003ch6\u003eInstallation and helm fit\u003c\/h6\u003e\u003cp\u003ePlan the install around the cutout and the rear clearance for cables and bend radius, especially on larger 4K screens where multiple network and video connections may be used. A flush-mount glass-helm install keeps the screen readable and reduces snag points in the cockpit, but a bail mount can make sense on open boats where you want quick access behind the unit.\u003c\/p\u003e\u003cp\u003eOn saltwater boats, run wiring so connectors stay above bilge level and away from direct washdown streams. Use a drip loop on every cable run and keep network cabling separated from high-current runs to reduce noise.\u003c\/p\u003e\u003ch6\u003eNetworking and system integration\u003c\/h6\u003e\u003cp\u003eGarmin BlueNet gives you the bandwidth for high-traffic accessories like radar, cameras, and multi-screen chart sharing. NMEA 2000 and NMEA 0183 support makes it straightforward to bring in heading sensors, AIS targets, autopilot control, and engine data through compatible gateways.\u003c\/p\u003e\u003cp\u003eIf you are replacing an older multi-function display, confirm your existing network type and connector standards before you plan adapters or backbone changes. On boats with multiple stations, keeping network standards consistent across stations helps avoid duplicated sensors and unnecessary conversions.\u003c\/p\u003e\u003ch6\u003eWho this is a good match for\u003c\/h6\u003e\u003cp\u003eThis series fits skippers building a connected helm where charting, radar, autopilot control, and camera views live on the same screen. It also suits larger center consoles, sportfishers, and yachts where a 19-inch to 27-inch display improves split-screen readability for offshore runs and busy inlets.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Worldwide basemap \/ No \/ 19\"","offer_id":51550312661238,"sku":"APL419670-V14","price":10099.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 22\"","offer_id":51550312694006,"sku":"APL419670-V0","price":11699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 17\"","offer_id":51550312726774,"sku":"APL419670-V13","price":6699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ Yes \/ 10\"","offer_id":51550312759542,"sku":"APL419670-V18","price":3699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 13\"","offer_id":51550312792310,"sku":"APL419670-V12","price":4499.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ Yes \/ 13\"","offer_id":51550312825078,"sku":"APL419670-V22","price":4999.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 17\"","offer_id":51550312857846,"sku":"APL419670-V10","price":6699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 10\"","offer_id":51550312890614,"sku":"APL419670-V11","price":3199.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 24\"","offer_id":51550312923382,"sku":"APL419670-V6","price":13699.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 13\"","offer_id":51550312956150,"sku":"APL419670-V9","price":4499.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 27\"","offer_id":51550312988918,"sku":"APL419670-V1","price":17199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ Yes \/ 13\"","offer_id":51550313021686,"sku":"APL419670-V19","price":4999.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ Yes \/ 10\"","offer_id":51550313054454,"sku":"APL419670-V21","price":3699.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 19\"","offer_id":51550313087222,"sku":"APL419670-V7","price":10199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 27\"","offer_id":51550313119990,"sku":"APL419670-V17","price":17099.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 22\"","offer_id":51550313152758,"sku":"APL419670-V15","price":11599.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 10\"","offer_id":51550313185526,"sku":"APL419670-V8","price":3199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ Yes \/ 17\"","offer_id":51550313218294,"sku":"APL419670-V20","price":7199.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ Yes \/ 17\"","offer_id":51550313251062,"sku":"APL419670-V23","price":7199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 24\"","offer_id":51550313283830,"sku":"APL419670-V16","price":13599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1282081_apl419670.webp?v=1787790607"},{"product_id":"apl158099","title":"Garmin GPSMAP 8400\/8600 MFD, NMEA 2000, Garmin Marine Network","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin GPSMAP 84xx\/86xx series is a touchscreen multifunction display and chartplotter family with 10\", 12\", 16\", and 17\" Full HD screens, sold in packages that can include built-in sonar and either a Worldwide basemap or Garmin Navionics+ charts. It brings charting, navigation, and system control onto one helm display, with a screen that stays readable in bright sun and when you are wearing polarized sunglasses.\u003c\/p\u003e\u003cp\u003eFor system builds, it connects over NMEA 2000 and the Garmin Marine Network so you can share data and accessories across displays. Wireless connectivity includes Wi-Fi, Bluetooth, and ANT, which helps when you want app-based management and compatible wireless accessories in the cockpit.\u003c\/p\u003e\u003cp\u003eAll models use a housing built from die-cast aluminum and polycarbonate plastic and carry an IEC 60529 IPX7 water rating for incidental exposure up to 1 m for up to 30 minutes. Power input and fusing depend on display size, with support that fits common 12 V and 24 V onboard systems when wired and protected correctly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFull HD IPS touchscreen display in 10\", 12\", 16\", or 17\" sizes depending on configuration\u003c\/li\u003e\n\u003cli\u003eIEC 60529 IPX7 water rating for incidental exposure up to 1 m for up to 30 minutes\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum and polycarbonate plastic housing for helm environments with vibration and salt air\u003c\/li\u003e\n\u003cli\u003ePower input supports typical 12 V and 24 V systems: 10 to 32 VDC on 10\"\/12\"\/16\" models and 10 to 35 VDC on 17\" models\u003c\/li\u003e\n\u003cli\u003eNetworking support for NMEA 2000 and the Garmin Marine Network to share data and accessories between stations\u003c\/li\u003e\n\u003cli\u003eWi-Fi, Bluetooth, and ANT wireless connectivity, including ActiveCaptain app support\u003c\/li\u003e\n\u003cli\u003eSmartMode station controls for quick recall of saved helm layouts\u003c\/li\u003e\n\u003cli\u003eSailAssist sailing tools available for sailing data pages and race guidance\u003c\/li\u003e\n\u003cli\u003eOn Sonar Yes configurations, built-in sonar support for CHIRP traditional plus ClearVü and SideVü scanning sonar with a compatible transducer\u003c\/li\u003e\n\u003cli\u003eChart bundle varies by package: Worldwide basemap or Garmin Navionics+\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product family is offered across multiple screen sizes and bundle options. The configurations vary by display size (10\", 12\", 16\", or 17\"), the included charts and maps (Worldwide basemap or Garmin Navionics+), and whether the package includes built-in sonar (Sonar Yes) or a chartplotter-only setup (Sonar No).\u003c\/p\u003e\u003cp\u003eWhen comparing options, treat Sonar Yes as the chartplotter\/sonar combination packages and Sonar No as the display-only chartplotter packages. Chart content is also tied to the bundle, so the included cartography depends on whether the configuration is listed with Worldwide basemap or Garmin Navionics+.\u003c\/p\u003e\u003ch6\u003eInstallation and helm fit\u003c\/h6\u003e\u003cp\u003eThese displays can be mounted flush in a dash cutout or flat mounted so multiple screens can sit edge-to-edge for a glass-helm style panel. For 10\", 12\", and 16\" units, plan about 11.1 cm (4 3\/8 in.) of clearance behind the panel for connectors and cable routing.\u003c\/p\u003e\u003cp\u003eIf you prefer a bracket mount, the 10\" and 12\" models include the bail-mount bracket and hardware, while the 16\" bail mount uses an accessory bracket. Before you seal and fasten the unit, confirm cable routing, strain relief, and access to the back of the display for service and any card access your setup requires.\u003c\/p\u003e\u003ch6\u003eElectrical and environmental notes\u003c\/h6\u003e\u003cp\u003eOperating temperature range is -15°C to 55°C (5°F to 131°F). For overcurrent protection, the 10\"\/12\"\/16\" models specify a 10 A, 125 V fast-acting fuse, while the 17\" models specify a 15 A fuse.\u003c\/p\u003e\u003cp\u003ePower input depends on size: 10\"\/12\"\/16\" models accept 10 to 32 VDC, and 17\" models accept 10 to 35 VDC. That range supports both 12 V and 24 V systems, but the wiring gauge and fuse selection should match the model and your run length.\u003c\/p\u003e\u003ch6\u003eNetworking and system integration\u003c\/h6\u003e\u003cp\u003eNMEA 2000 support allows the display to sit on a backbone with engine data, sensors, and marine instruments, while the Garmin Marine Network supports sharing and integration across multiple displays and network accessories. SmartMode layouts help keep common helm views one tap away when switching between tasks on the water.\u003c\/p\u003e\u003cp\u003eWi-Fi supports pairing with the ActiveCaptain app for functions such as software management and smart notifications, and OneHelm integration support allows compatible third-party systems to be controlled from the screen.\u003c\/p\u003e\u003ch6\u003eSonar and transducer pairing\u003c\/h6\u003e\u003cp\u003eConfigurations marked with Sonar Yes include built-in sonar capability. They support traditional CHIRP sonar and scanning views such as ClearVü and SideVü, with results that depend on choosing a compatible transducer matched to your hull and fishing style.\u003c\/p\u003e\u003cp\u003eConfigurations marked with Sonar No are chartplotter-only packages, which can make sense when sonar is already handled elsewhere in the system or when you prefer to add it separately.\u003c\/p\u003e\u003ch6\u003eCharts and day-to-day navigation\u003c\/h6\u003e\u003cp\u003eSome packages include the Worldwide basemap for general navigation, while others include Garmin Navionics+ chart content. Keeping the same chart bundle across stations can simplify route sharing and make it easier to keep everyone on the same page when running inshore channels or planning an offshore track.\u003c\/p\u003e\u003ch6\u003eWho it fits\u003c\/h6\u003e\u003cp\u003eThis family is a good match for helms that want a bright touch display with room to expand into a networked system with radar, autopilot, and instruments. Anglers who want sonar on the main screen will typically use the Sonar Yes configurations, paired with a compatible transducer that matches the boat and how it is fished.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"10\" \/ No \/ Worldwide basemap","offer_id":51550325899510,"sku":"APL158099-V8","price":2799.99,"currency_code":"USD","in_stock":false},{"title":"10\" \/ No \/ Garmin Navionics+","offer_id":51550325932278,"sku":"APL158099-V10","price":2799.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ Yes \/ Garmin Navionics+","offer_id":51550325965046,"sku":"APL158099-V3","price":6299.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ Yes \/ Worldwide basemap","offer_id":51550325997814,"sku":"APL158099-V1","price":6199.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ Yes \/ Garmin Navionics+","offer_id":51550326030582,"sku":"APL158099-V13","price":4299.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ No \/ Worldwide basemap","offer_id":51550326063350,"sku":"APL158099-V12","price":3699.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ No \/ Garmin Navionics+","offer_id":51550326096118,"sku":"APL158099-V14","price":3799.99,"currency_code":"USD","in_stock":false},{"title":"17\" \/ No \/ Worldwide basemap","offer_id":51550326128886,"sku":"APL158099-V5","price":7699.99,"currency_code":"USD","in_stock":false},{"title":"10\" \/ Yes \/ Worldwide basemap","offer_id":51550326161654,"sku":"APL158099-V7","price":2899.99,"currency_code":"USD","in_stock":false},{"title":"10\" \/ Yes \/ Garmin Navionics+","offer_id":51550326194422,"sku":"APL158099-V9","price":2999.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ No \/ Worldwide basemap","offer_id":51550326227190,"sku":"APL158099-V2","price":5699.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ Yes \/ Worldwide basemap","offer_id":51550326259958,"sku":"APL158099-V11","price":4199.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ No \/ Garmin Navionics+","offer_id":51550326292726,"sku":"APL158099-V4","price":5799.99,"currency_code":"USD","in_stock":true},{"title":"17\" \/ No \/ Garmin Navionics+","offer_id":51550326325494,"sku":"APL158099-V6","price":7799.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281865_apl158099.webp?v=1787790934"},{"product_id":"apl185088","title":"Garmin ECHOMAP Plus\/UHD 7in Protective Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13126-00 is a protective cover for Garmin ECHOMAP Plus and ECHOMAP UHD 7-inch chartplotters when the unit is not in use. It is sized for the 7-inch ECHOMAP families, so it is meant to fit the face and housing shape of those displays rather than being a generic sun cover.\u003c\/p\u003e\u003cp\u003eOn boats that live outdoors, get regular washdowns, or spend time trailering, a cover helps keep salt residue, spray, dust, and incidental scuffs off the screen between trips. It is a simple add-on that keeps the display looking cleaner and reduces the need to wipe the unit down before powering up.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Garmin ECHOMAP Plus and ECHOMAP UHD 7-inch chartplotters\u003c\/li\u003e\n\u003cli\u003eHelps shield the screen and front of the unit from spray, dust, and dockside bumps when the display is off\u003c\/li\u003e\n\u003cli\u003eUseful during storage, trailering, and routine cockpit rinsing after a day on the water\u003c\/li\u003e\n\u003cli\u003eProvides a consistent, snug cover fit compared with loose universal covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover matches the Garmin ECHOMAP Plus 72cv, 72sv, 73cv, 73sv, 74cv, 74sv, 75cv, 75sv, 77cv, and 77sv, as well as the Garmin ECHOMAP UHD 72cv, 72sv, 73cv, 73sv, 74cv, 74sv, 75cv, and 75sv.\u003c\/p\u003e\u003cp\u003eIf your display is a different size, a STRIKER model, or part of the ECHOMAP UHD2 lineup, confirm the cover that matches that series before ordering since the housing shape and button layout can differ.\u003c\/p\u003e\u003ch6\u003eInstallation and care\u003c\/h6\u003e\u003cp\u003eUse the cover only when the unit is not in use, and remove it before operating the chartplotter. Rinse the cover with fresh water after salty runs and let it dry before putting it back on for storage. If it gets grimy, mild soap and water is usually enough without leaving residue on the display area.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for center consoles, bay boats, and small cruisers where the display is exposed in the cockpit, as well as trailer boats that see road dust and sun between launches. It also makes sense for slip-kept boats where electronics stay mounted year-round and you want the screen covered between outings.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550330257654,"sku":"APL185088","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695851_apl033551_jpeg.jpg?v=1787791089"},{"product_id":"apl677500","title":"Garmin echo Flush Mount Kit, For echo 100\/101\/150\/151\/151dv\/300c\/301c\/301dv, Flush Mount Gasket, Mounting Hardware","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11681-00 is a flush mount kit for installing an echo 100, echo 150, or echo 300c directly into a flat helm or dash panel. It replaces the look of a bracket-mounted display with a cleaner, built-in fit that sits closer to the console.\u003c\/p\u003e\u003cp\u003eThe flush-mount template for this installation references 3\/8 in. (9.5 mm) and 11\/64 in. (4.5 mm) drill sizes during panel prep, so it is worth confirming you have the right bits on hand before you start cutting. The included gasket helps the bezel sit evenly against the panel for a finished look.\u003c\/p\u003e\u003cp\u003eThis is a good match for tighter helms where a bracket sticks out into the cockpit, or anywhere you want the fishfinder to stay tucked in and less exposed to bumps while docking or fishing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Garmin echo 100, echo 150, and echo 300c units for a true flush installation\u003c\/li\u003e\n\u003cli\u003eMounts the display close to the dash to reduce protrusion around the helm\u003c\/li\u003e\n\u003cli\u003eIncludes a flush mount gasket for a cleaner bezel-to-panel transition\u003c\/li\u003e\n\u003cli\u003eTemplate references 3\/8 in. (9.5 mm) and 11\/64 in. (4.5 mm) drill sizes for panel work\u003c\/li\u003e\n\u003cli\u003eHardware and instructions are included for the flush-mount install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is specific to the echo models listed and is not a universal mount. Confirm the exact model of your unit before ordering, especially if your display is part of a bundle or has a similar-looking housing.\u003c\/p\u003e\u003cp\u003eFlush mounting requires space behind the panel for the power and transducer connections, plus room for the cables to bend without being pinched. If your console has a shallow electronics pocket, check depth and cable routing before cutting the opening.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eA flush install typically involves cutting the dash opening and drilling the mounting holes, then securing the unit from the front using the supplied hardware. Dry-fit everything first, and protect nearby wiring and hoses before you start drilling.\u003c\/p\u003e\u003cp\u003eIf your dash is wood-cored or composite, seal the exposed cut edges after trimming to keep moisture out over time. Tighten fasteners evenly so the gasket seats properly without stressing the panel.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount gasket\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550331470070,"sku":"APL677500","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834648_apl677500.webp?v=1787791174"},{"product_id":"apl314869","title":"Garmin GPSMAP 1643xsv Chartplotter\/Fishfinder, 16 in IPS Touchscreen, Garmin Navionics+ Built-In Charts, Ultra High-Definition SideVü\/ClearVü Sonar, 1 kW CHIRP Support, NMEA 2000, Wi-Fi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02919-03 is a GPSMAP 1643xsv chartplotter and fishfinder combo with a 16 in IPS touchscreen (1920 x 1080) and preloaded Garmin Navionics+ charts for U.S. and Canada waters. It is a practical fit for helms where you want a large plotter view, built-in sonar processing, and room to grow into a networked system.\u003c\/p\u003e\u003cp\u003eThe internal sonar module covers Ultra High-Definition SideVü and ClearVü scanning, and it supports 1 kW CHIRP traditional sonar, but it still needs a compatible transducer (sold separately) to put sound into the water. Power is 10 to 32 Vdc for 12 V and 24 V systems, and the unit is rated to handle incidental water exposure up to 1 m for up to 30 minutes.\u003c\/p\u003e\u003cp\u003eFor system buildouts, you get NMEA 2000, NMEA 0183, and J1939 connections plus two Garmin Marine Network ports, so you can share charts, radar, sonar, and video with other compatible displays and modules.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e16 in IPS touchscreen with 1920 x 1080 resolution for clear, full-helm chart and sonar views.\u003c\/li\u003e\n\u003cli\u003ePower input 10 to 32 Vdc; uses an 8 A fast-acting fuse on the main power feed.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Ultra High-Definition SideVü and ClearVü scanning sonar, with support for 1 kW CHIRP traditional sonar (transducer required, sold separately).\u003c\/li\u003e\n\u003cli\u003ePreloaded Garmin Navionics+ coastal and inland charts for U.S. and Canada waters, including Auto Guidance+ and a 1-year subscription for daily downloadable updates through ActiveCaptain.\u003c\/li\u003e\n\u003cli\u003eNetwork and data integration: 2 Garmin Marine Network ports, 1 NMEA 2000 port, NMEA 0183 input and transmit support, and a J1939 port.\u003c\/li\u003e\n\u003cli\u003eVideo support with a composite video input (BNC) and HDMI output.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi, Bluetooth, and ANT+ connectivity for pairing with the ActiveCaptain app and compatible accessories.\u003c\/li\u003e\n\u003cli\u003ePhysical size 15.1 x 10.3 x 3.0 in and about 9.7 lb for planning dash space and mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit ships with a flush-mount kit and gasket, and it can be installed at the helm where you have about 3.75 in (94 mm) of clearance behind the case for connectors and cable bend radius. Run the power harness directly to a fused 10 to 32 Vdc supply and keep it on a clean electronics circuit to avoid voltage drop when engines crank.\u003c\/p\u003e\u003cp\u003eIt is rated for operation from -15 to 55 C and it tolerates incidental water exposure, but it still benefits from smart placement away from constant spray, hot engine-room air, and areas where washdowns force water into connectors.\u003c\/p\u003e\u003ch6\u003eNetworking and system integration\u003c\/h6\u003e\u003cp\u003eNMEA 2000 networking is straightforward with the included T-connector and drop cable, but the display is not powered through the NMEA 2000 backbone, so it always needs its own power feed. If your boat is already on NMEA 2000, you are simply adding another drop at the helm.\u003c\/p\u003e\u003cp\u003eFor higher bandwidth sharing like sonar, radar, and video, the Garmin Marine Network ports act as a network switch. Use Garmin Marine Network cables for these runs rather than standard Ethernet patch cables, especially in damp helm spaces where corrosion becomes a problem fast.\u003c\/p\u003e\u003cp\u003eThe NMEA 0183 wiring supports one transmit and one receive port, which helps when you are interfacing older AIS, VHF, or autopilot gear that still uses 0183. The J1939 port is there for compatible engine data on the screen when your engine network supports it, and OneHelm integrations allow on-screen control for select digital switching and third-party devices.\u003c\/p\u003e\u003ch6\u003eSonar and fishing use\u003c\/h6\u003e\u003cp\u003eThe built-in sonar module means you can run traditional CHIRP plus SideVü and ClearVü scanning without adding a separate sounder box. Choose a transducer that matches how you fish and where it can be mounted, and plan the cable route back to the 12-pin transducer port before you cut any holes.\u003c\/p\u003e\u003cp\u003eIf you plan to add live sonar, it is compatible with Panoptix and LiveScope systems (transducer required, sold separately). This setup is a good match for anglers who want scanning detail on structure and bait while still keeping a full-size chart view for coastal cruising and longer offshore runs.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGPSMAP 1643xsv chartplotter\u003c\/li\u003e\n\u003cli\u003emicroSD card preinstalled\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 drop cable\u003c\/li\u003e\n\u003cli\u003eFlush-mount kit with gasket\u003c\/li\u003e\n\u003cli\u003eTrim piece snap covers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550347886838,"sku":"APL314869","price":5099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280348_apl314869.webp?v=1787791741"},{"product_id":"apl587839","title":"Garmin echo U.S. AC Charger, For Portable echo Kit AGM Battery","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11849-10 is an AC charger for the AGM battery used with Garmin portable echo kit bundles, letting you top off the battery from a standard U.S. wall outlet before heading out.\u003c\/p\u003e\u003cp\u003eIt charges the battery directly instead of tying into your boat’s electrical system, which is handy when the fishfinder moves between boats, rides in a kayak crate, or lives in a portable case for dockside setup.\u003c\/p\u003e\u003cp\u003eFor best results on the water, keep the battery charged between trips and store the charger where it stays dry and out of salt air.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCharges the AGM battery included with Garmin portable echo kit packages from a U.S. AC outlet\u003c\/li\u003e\n\u003cli\u003eDirect battery connection for simple charging off the boat, no wiring into the vessel required\u003c\/li\u003e\n\u003cli\u003eCommonly used with echo 101, 150, 151, 151dv, 201, 301c, 301dv, 501c, 551c, and the STRIKER 4 portable bundle\u003c\/li\u003e\n\u003cli\u003eUseful for keeping a portable sonar battery ready for short-notice launches and travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis charger is intended for the AGM battery supplied with Garmin portable echo kit setups. If your kit uses a different battery type or a different charging connector, match the battery and plug style before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the charger lead to the AGM battery first, then plug the adapter into the wall outlet. When you are finished charging, unplug from the outlet before disconnecting from the battery.\u003c\/p\u003e\u003ch6\u003eCharging notes for marine use\u003c\/h6\u003e\u003cp\u003eUse the charger in a dry area with ventilation, not in a damp bilge or where spray can reach it. If the charger lead or battery contacts get salty, wipe them down before packing the portable kit back into its case.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550352703734,"sku":"APL587839","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695743_apl587839_jpeg.jpg?v=1787791923"},{"product_id":"apl426197","title":"Garmin M265LH In-Hull CHIRP Transducer, Depth Only, 1 kW, 12-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12380-20 is a 1 kW in-hull CHIRP transducer for depth readings, built around a plastic housing and a 12-pin connection for compatible Garmin sonar inputs.\u003c\/p\u003e\u003cp\u003eIt runs CHIRP Low from 42 to 65 kHz and CHIRP High from 130 to 210 kHz, with beamwidths of 16° to 25° (low) and 6° to 10° (high). It is rated for depths up to 3,000 ft, and the attached cable is 39 ft long, which is usually enough to reach the helm on mid-size to larger boats without extensions.\u003c\/p\u003e\u003cp\u003eThis is an in-hull installation that shoots through fiberglass, so the outside of the hull stays smooth and there is no below-the-waterline fitting. It is not recommended for cored-hull vessels, and it needs a solid fiberglass section where the mounting tank can be bonded and kept liquid-tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 kW dual-band CHIRP operation: 42 to 65 kHz (low) and 130 to 210 kHz (high)\u003c\/li\u003e\n\u003cli\u003eNarrow beam coverage for detail: 16° to 25° (low) and 6° to 10° (high)\u003c\/li\u003e\n\u003cli\u003eIn-hull mounting using a liquid-filled tank, keeping the transducer protected inside the boat and leaving the hull exterior untouched\u003c\/li\u003e\n\u003cli\u003eSupported deadrise range of 0° to 30° when the tank is cut to match the hull angle\u003c\/li\u003e\n\u003cli\u003eDepth-only transducer (no speed and no water temperature sensing)\u003c\/li\u003e\n\u003cli\u003eGarmin 12-pin connector with a 39 ft cable for compatible Garmin chartplotters and sonar modules\u003c\/li\u003e\n\u003cli\u003eNot recommended for cored-hull vessels; performs best over solid fiberglass with a well-chosen mounting spot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003ePlan for an accessible, solid fiberglass location inside the hull, commonly in the bilge area, where the surface can be cleaned and prepared for bonding the tank. Avoid spots over coring, voids, stringers, fuel tanks, or areas that trap air, since air and core material can weaken returns or make the bottom reading unstable.\u003c\/p\u003e\u003cp\u003eThe 12-pin plug is intended for Garmin sonar ports that accept 12-pin transducers. If your system uses a different connector style or a black box with a different input, verify connector compatibility before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLocation matters more with in-hull mounts than with through-hull transducers. A practical approach is to test the transducer at the chosen spot while afloat and compare it to a baseline reading with the transducer over the side, then commit to bonding once you see a steady depth number and a strong bottom trace.\u003c\/p\u003e\u003cp\u003eThe mounting tank is cut to match the hull deadrise so the beam points straight down, then bonded to a smooth, clean section of hull. After curing, the tank is filled with propylene glycol and the transducer is secured in place with its O-ring gasket. Keep the tank in a cool, ventilated area and route the cable away from engine harnesses and high-current wiring to reduce electrical noise.\u003c\/p\u003e\u003cp\u003eIf the unit is supplied with a factory connector, do not cut it off for routing. Coil and secure any extra cable so it cannot chafe in the bilge.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup is a strong fit for boats kept on a trailer or lift, and for owners who want capable CHIRP depth performance without a through-hull fitting. It also suits offshore runs and deep-water fishing where bottom tracking matters, provided the hull and mounting location support a clean sonar path.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the tank seal and verify the fill level stays above the hull contact area, especially after seasonal temperature swings or heavy pounding. Keeping the bilge clean and the cable properly supported helps maintain consistent readings over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550361026806,"sku":"APL426197","price":1814.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697247_apl426197_jpeg.jpg?v=1787792022"},{"product_id":"apl100855","title":"Garmin B75 Thru-Hull Transducer, CHIRP, 600W, 8-Pin, Bronze Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin B75 is a bronze, low-profile thru-hull CHIRP transducer family with a 600 W rating, depth sensing, and fast-response water-temperature sensing. It is offered in Mid-CHIRP (80 to 130 kHz) or High CHIRP (130 to 210 kHz) to match the water you run and the type of targets you want to separate.\u003c\/p\u003e\u003cp\u003eMid-CHIRP versions cover 80 to 130 kHz with a 24° to 16° beamwidth and are rated to a maximum depth of 274 m (900 ft). High CHIRP versions cover 130 to 210 kHz with a 15° to 9° beamwidth and are rated to a maximum depth of 214 m (700 ft). Installation is a true thru-hull that uses a 70 mm (2-13\/16\") hole, with a 95 mm (3.75\") usable shaft length.\u003c\/p\u003e\u003cp\u003eThe internal tilt element is fixed at 0°, 12°, or 20° so the sonar beam points straight down when the unit is mounted close to flush. Match the tilt to the hull deadrise at the install location: 0° for 0° to 7°, 12° for 6° to 15°, and 20° for 16° to 24°. The bronze housing is intended for fiberglass or wood hulls and is commonly used on stepped, planing, or displacement hull forms.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e600 W single-band CHIRP transducer with depth and fast-response water-temperature sensing\u003c\/li\u003e\n\u003cli\u003eMid-CHIRP option: 80 to 130 kHz with 24° to 16° beamwidth\u003c\/li\u003e\n\u003cli\u003eHigh CHIRP option: 130 to 210 kHz with 15° to 9° beamwidth\u003c\/li\u003e\n\u003cli\u003eFixed internal tilt options (0°, 12°, 20°) to match hull deadrise without adding a fairing block\u003c\/li\u003e\n\u003cli\u003eThru-hull mounting with 70 mm (2-13\/16\") hole size and 95 mm (3.75\") usable shaft length\u003c\/li\u003e\n\u003cli\u003eBronze housing for fiberglass or wood hulls, with a low-profile shape that sits close to flush when installed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations to match both hull deadrise and sonar band.\u003c\/p\u003e\u003cp\u003eThe differences across the range are the fixed tilt angle (0°, 12°, or 20°) and the CHIRP frequency band (Mid-CHIRP or High CHIRP).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-11636-20: Tilt 0° and CHIRP Frequency Mid-CHIRP. A 0° tilt matches flatter mounting areas (0° to 7° deadrise) while keeping the beam pointed down.\u003c\/li\u003e\n\u003cli\u003e010-11636-21: Tilt 12° and CHIRP Frequency Mid-CHIRP. A 12° tilt aligns with moderate deadrise sections (6° to 15°) so the transducer can sit close to flush.\u003c\/li\u003e\n\u003cli\u003e010-11636-22: Tilt 20° and CHIRP Frequency Mid-CHIRP. A 20° tilt matches higher deadrise areas (16° to 24°) where a straight 0° element would aim the beam off to the side.\u003c\/li\u003e\n\u003cli\u003e010-11634-21: Tilt 12° and CHIRP Frequency High CHIRP. High CHIRP uses a narrower beam, which helps when you want tighter target separation in shallower water.\u003c\/li\u003e\n\u003cli\u003e010-11634-22: Tilt 20° and CHIRP Frequency High CHIRP. This combines the higher-deadrise tilt range (16° to 24°) with the High CHIRP band for detailed returns in shallower water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is a thru-hull install, plan on drilling a 70 mm (2-13\/16\") hole and having clear access inside the hull for the nut and cable routing. Pick a location that stays in clean water at speed and is clear of turbulence sources like strakes, steps, and intakes. A close-to-flush install helps keep drag down and protects the transducer from impact.\u003c\/p\u003e\u003ch6\u003eSonar and system integration\u003c\/h6\u003e\u003cp\u003eVerify that your sonar source supports the band you are selecting (Mid-CHIRP vs High CHIRP) and that the connector and port type match your system before you commit to cable routing. Once connected, you will get depth plus water-temperature data from the built-in sensor.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eMid-CHIRP is a solid fit for boats that split time between shallow and mid-depth water and still want meaningful bottom detail. High CHIRP is a better match when you spend more time in shallower water and care about separating targets near structure.\u003c\/p\u003e\u003cp\u003eThis transducer family makes sense for fiberglass and wood-hull boats where you want a low-profile thru-hull installation and you can choose a fixed tilt that matches the deadrise at the mounting spot.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12° \/ Mid-CHIRP","offer_id":51550361059574,"sku":"APL100855-V2","price":879.99,"currency_code":"USD","in_stock":true},{"title":"0° \/ Mid-CHIRP","offer_id":51550361092342,"sku":"APL100855-V1","price":879.99,"currency_code":"USD","in_stock":true},{"title":"12° \/ High CHIRP","offer_id":51550361125110,"sku":"APL100855-V4","price":929.99,"currency_code":"USD","in_stock":true},{"title":"20° \/ Mid-CHIRP","offer_id":51550361157878,"sku":"APL100855-V3","price":879.99,"currency_code":"USD","in_stock":false},{"title":"20° \/ High CHIRP","offer_id":51550361190646,"sku":"APL100855-V5","price":929.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1266571_apl100855_jpeg.jpg?v=1787792023"},{"product_id":"apl454937","title":"Garmin OnDeck Relay Switch, For OnDeck Hub, 24Vdc, Up to 8A","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13009-07 is a 24 Vdc relay switch that lets you turn a DC accessory on and off through a Garmin OnDeck Hub. The control side operates on 15.6 to 31.2 Vdc, and the switched contacts are rated for loads from 0.1 A up to 8 A at 20 to 32 Vdc (up to 9 A at 10 to 16 Vdc).\u003c\/p\u003e\u003cp\u003eOnce it is wired and configured in the OnDeck system, the switch can be controlled from the ActiveCaptain app and from compatible Garmin chartplotters. A single OnDeck Hub can support up to five relay switches, which is handy when you want separate control of a few circuits rather than tying everything into one feed.\u003c\/p\u003e\u003cp\u003eThis is a good fit for 24 V boats that already have an OnDeck Hub installed and want remote on and off control for a modest-load circuit such as lighting, a fan, a small pump, or powering a network segment, as long as the current draw stays within the relay rating.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 V control voltage range: 15.6 to 31.2 Vdc on the relay coil side\u003c\/li\u003e\n\u003cli\u003eSwitching capacity: 0.1 A minimum load; up to 8 A at 20 to 32 Vdc (up to 9 A at 10 to 16 Vdc)\u003c\/li\u003e\n\u003cli\u003eSupports up to five relay switches on one OnDeck Hub\u003c\/li\u003e\n\u003cli\u003eSwitch control available through the ActiveCaptain app and on compatible Garmin chartplotters after configuration\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -15 to 85 C (5 to 185 F)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the relay where it stays dry and is protected from spray, typically near your DC distribution point so the high-current wiring runs are short. Secure it so it cannot move or chafe as the boat pounds, and keep wiring supported with proper strain relief.\u003c\/p\u003e\u003cp\u003eOn the wiring side, think of this as two parts: a low-current control connection into the OnDeck system, and a separate set of contacts that switch your accessory circuit. Label both ends while you work so the switch name in the app matches what it actually controls at the panel.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePlan the switched circuit like any other onboard DC branch: fuse it correctly, choose wire gauge based on current and run length, and keep all connections clean and tight. Stay within the contact ratings, especially with devices that have a high inrush current.\u003c\/p\u003e\u003cp\u003eIf you are switching inductive loads like a solenoid or small motor, follow the device maker guidance for suppression and wiring practices to reduce arcing and electrical noise.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis relay switch is for OnDeck systems running on a 24 V supply, with the control side requiring 15.6 to 31.2 Vdc. If your boat and OnDeck Hub are powered from a 12 V house bank, this is not the right relay version for the control side.\u003c\/p\u003e\u003cp\u003eOn the load side, it can switch either 12 V or 24 V circuits as long as the current and voltage stay within the published contact ratings, but it is typically used in 24 V installations to match the onboard system voltage.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eOwners commonly use an OnDeck-controlled relay for deck or cockpit lighting, a cabin fan, a small utility pump, or powering a piece of equipment that you want off when the boat is unattended. It is also useful when you want a controlled feed to a subsystem that otherwise would be left energized at the dock.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRecheck terminals after the first few outings, then inspect periodically for corrosion, looseness, or chafe. If the relay is in a locker that sees moisture, keeping connections sealed and supported will do more for long-term reliability than anything else.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550362632438,"sku":"APL454937","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695758_apl454937_jpeg.jpg?v=1787794546"},{"product_id":"apl024912","title":"Garmin ClearVü\/SideVü Sonar Transducer, CHIRP Traditional, 12-Pin, Temp Sensor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Garmin all-in-one scanning sonar transducer combines traditional CHIRP with ClearVü and SideVü in one housing, with configurations that cover High Wide CHIRP (150 to 240 kHz) plus scanning frequency sets such as 455\/800 kHz, 455\/1200 kHz, or 455\/800\/1000 kHz.\u003c\/p\u003e\u003cp\u003eAll versions use a 12-pin connection to a compatible Garmin sonar-capable display or black box, and the mounting style is selected at purchase: transom mount options for typical outboard and I\/O boats, or thru-hull options when you want the element installed through the hull. Cable length depends on the configuration (commonly 20 ft or 25 ft), so it is worth checking your run from the transducer to the helm before you drill.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one sonar types in a single transducer: traditional CHIRP plus ClearVü and SideVü scanning\u003c\/li\u003e\n\u003cli\u003eHigh Wide CHIRP traditional sonar range: 150 to 240 kHz\u003c\/li\u003e\n\u003cli\u003eScanning frequency choices depend on configuration: ClearVü 455\/800 kHz or ClearVü UHD 800 kHz, and SideVü 455\/800 kHz, SideVü 455\/1200 kHz, or 455\/800\/1000 kHz\u003c\/li\u003e\n\u003cli\u003e12-pin connector for Garmin sonar-capable units that support ClearVü and SideVü\u003c\/li\u003e\n\u003cli\u003eMounting options across the range: transom mount, single thru-hull, and a thru-hull pair option\u003c\/li\u003e\n\u003cli\u003eCable length varies by configuration (20 ft or 25 ft common) to better match different helm runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis listing covers multiple Garmin all-in-one transducer configurations that share the same core sonar types but differ in mounting method and scanning frequency coverage.\u003c\/p\u003e\u003cp\u003eThe main variables are installation (transom mount vs thru-hull) and the ClearVü and SideVü frequency sets listed below. In practice, higher scanning frequencies are used when you want tighter detail on structure, while 455 kHz is used when you need more reach to the sides.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-12909-00: Transom mount; ClearVü UHD 800 kHz; SideVü 455\/1200 kHz. Includes a higher-frequency SideVü option for tight structure detail and a 455 kHz setting when you want to scan farther out.\u003c\/li\u003e\n\u003cli\u003e010-12405-00: Transom mount; ClearVü 455\/800 kHz; SideVü 455\/800 kHz. A straightforward two-frequency setup that lets you switch between more detail (800 kHz) and more coverage (455 kHz).\u003c\/li\u003e\n\u003cli\u003e010-13073-00: Transom mount; ClearVü 455\/800\/1000 kHz; SideVü 455\/800\/1000 kHz. Adds a 1000 kHz option that gives another look for balancing detail and coverage in the scanning views.\u003c\/li\u003e\n\u003cli\u003e010-02732-10: Thru-hull mount; ClearVü 455\/800\/1000 kHz; SideVü 455\/800\/1000 kHz. A thru-hull install keeps the transducer off the transom and is selected when a through-the-hull mounting approach fits the boat better.\u003c\/li\u003e\n\u003cli\u003e010-02732-11: Thru-Hull Pair; ClearVü 455\/800\/1000 kHz; SideVü 455\/800\/1000 kHz. Supplied as a matched thru-hull pair for installations that use two through-hull elements rather than a single transducer body.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor transom-mount installs, place the transducer where it stays in solid water and is protected from bunks and rollers when trailering. Set the bracket so the transducer face runs level at speed, then secure and clamp the cable so it cannot chafe on the transom, splashwell, or rigging tube.\u003c\/p\u003e\u003cp\u003eFor thru-hull installs, plan the location from inside first, confirm access and hull thickness, and bed the fitting properly for your hull material. Many owners leave below-the-waterline drilling and sealing to a yard if they are not already comfortable with thru-hull work.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm your Garmin display or sonar module has a 12-pin transducer connection and supports both ClearVü and SideVü. You will select the scanning frequencies that are available on the specific configuration you install.\u003c\/p\u003e\u003cp\u003eMatch the mounting style to your hull and how you use the boat. Transom mounts are common on outboard and sterndrive boats, while thru-hull options are typically chosen when a through-the-hull installation is preferred over a transom bracket.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers who work structure and want traditional sonar for bottom tracking plus scanning views that show what is off to the sides. It also fits coastal cruising boats that want a clearer picture around docks, pilings, and drop-offs without adding separate sonar elements.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"455\/800\/1000 kHz \/ Thru-hull mount \/ 455\/800\/1000 kHz","offer_id":51550362992886,"sku":"APL024912-V4","price":899.99,"currency_code":"USD","in_stock":true},{"title":"UHD 800 kHz \/ Transom mount \/ 455\/1200 kHz","offer_id":51550363025654,"sku":"APL024912-V1","price":499.99,"currency_code":"USD","in_stock":true},{"title":"455\/800\/1000 kHz \/ Thru-Hull Pair \/ 455\/800\/1000 kHz","offer_id":51550363058422,"sku":"APL024912-V5","price":1649.99,"currency_code":"USD","in_stock":true},{"title":"455\/800\/1000 kHz \/ Transom mount \/ 455\/800\/1000 kHz","offer_id":51550363091190,"sku":"APL024912-V3","price":599.99,"currency_code":"USD","in_stock":true},{"title":"455\/800 kHz \/ Transom mount \/ 455\/800 kHz","offer_id":51550363123958,"sku":"APL024912-V2","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1268293_apl024912_jpeg.jpg?v=1787814301"},{"product_id":"apl363071","title":"Garmin Marine and Cart Adjustable Handheld GPS Mount, For Approach Colorado Oregon and Dakota Series, Flat Surface","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11031-00 is an adjustable handheld mount that fastens to a flat surface so a compatible Garmin handheld GPS or satellite communicator stays in a consistent spot on board or in a vehicle.\u003c\/p\u003e\u003cp\u003eIt gives you a fixed place for the device when the boat is moving, with an angle you can set for your helm position to keep the screen readable. Packaged weight is about 0.22 lb.\u003c\/p\u003e\u003cp\u003eMounting screws are not included, and when it is used with an inReach Mini 2, an additional Spine Mount Adapter is required.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlat-surface mount for keeping a compatible Garmin handheld within reach at the helm, nav station, or dash\u003c\/li\u003e\n\u003cli\u003eAdjustable angle to aim the screen where you can see it without holding the device\u003c\/li\u003e\n\u003cli\u003eWorks in marine and vehicle installs when you want the same handheld in a fixed location\u003c\/li\u003e\n\u003cli\u003eMounting screws are not included so you can match fasteners to your surface and corrosion requirements\u003c\/li\u003e\n\u003cli\u003eRequires a Spine Mount Adapter when used with inReach Mini 2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is used across many Garmin handheld families, including handheld GPS and satellite communicators. Fit depends on the device using the compatible handheld mounting interface, so it is worth confirming your exact model before drilling.\u003c\/p\u003e\u003cp\u003eIf you are mounting an inReach Mini 2, plan on the additional Spine Mount Adapter so the device locks in correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eChoose a spot with a clear viewing angle and enough clearance to dock and remove the handheld, such as the helm console, inside a pilothouse, or on a dash panel. On thin fiberglass or plastic, through-bolting with a backing plate helps the mount stay tight in vibration and chop.\u003c\/p\u003e\u003cp\u003eUse marine sealant around fastener holes where water can reach the backside of the panel, and select stainless fasteners that match your environment since hardware is not included.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis mount makes sense for boats that run a handheld as a primary navigator on a small console, as a backup GPS in the cockpit, or as a removable unit shared between the boat and tow vehicle. It also suits fishing and tender setups where a handheld needs a steady, hands-free position while underway.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550364434678,"sku":"APL363071","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697248_apl363071_jpeg.jpg?v=1787792110"},{"product_id":"apl151213","title":"Garmin BlueNet Network to RJ45 Adapter Cable, For OneHelm and Fusion RJ45 Devices","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12531-02 is an adapter cable that bridges a Garmin BlueNet network port to a standard RJ45 Ethernet connection. It lets you tie in compatible equipment that uses an RJ45 network jack, including Fusion PartyBus stereos, OneHelm digital switching hardware with an RJ45 port, IP cameras, and other third-party network devices. Garmin BlueNet supports network connection speeds up to 1 Gbps, and the BlueNet side uses a connector that is similar in size to a NMEA 2000 plug for easier routing behind the helm.\u003c\/p\u003e\u003cp\u003eThis cable is meant for bringing RJ45-based devices onto a BlueNet network. It is not used to connect legacy Garmin Marine Network devices directly to a BlueNet port in a mixed network setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdapter between a Garmin BlueNet network connector and a standard RJ45 Ethernet port\u003c\/li\u003e\n\u003cli\u003eUsed to connect a network-compatible Fusion PartyBus stereo to a Garmin BlueNet device\u003c\/li\u003e\n\u003cli\u003eSupports connecting compatible IP cameras and other third-party Ethernet devices to a Garmin BlueNet device\u003c\/li\u003e\n\u003cli\u003eFits Garmin BlueNet network layouts built around a Garmin BlueNet chartplotter or a Garmin BlueNet 20 switch\u003c\/li\u003e\n\u003cli\u003eHelps avoid mismatched connections when integrating RJ45 devices into a BlueNet-based network\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match when your boat has Garmin BlueNet networking but the device you need to add uses a conventional RJ45 Ethernet port. It is most often installed at the helm, inside an electronics locker, or near a network switch where the RJ45 side can stay protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe BlueNet connector can look similar in size to a NMEA 2000 connector, but it is for Ethernet networking and does not connect to a NMEA 2000 backbone.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with gentle bends and secure it so vibration does not stress the connectors. Leave a small service loop at each end so you can unplug equipment without pulling on the cable run.\u003c\/p\u003e\u003cp\u003eBecause RJ45 connections are best kept in a dry, sheltered spot, plan the termination point so the RJ45 end lands inside a protected enclosure or behind a gasketed panel whenever possible.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThis adapter makes sense when you are upgrading to Garmin BlueNet chartplotters and still want to network a Fusion PartyBus stereo, add an IP camera feed, or bring a third-party Ethernet device onto the boat network for configuration and troubleshooting.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550364631286,"sku":"APL151213","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715520_apl151213.jpg?v=1787792121"},{"product_id":"apl030822","title":"Garmin Marine Network RJ45 Cable Connector, O-Ring Seal, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10603-00 is a 2-pack of marinized RJ45 connector kits for terminating or repairing Garmin Marine Network Ethernet cables on a boat. Each kit includes an RJ45 modular plug, a connector housing with strain relief, an O-ring, and copper tape for the cable shield and drain wire.\u003c\/p\u003e\u003cp\u003eThis is the part you reach for when you need to pull a network cable through tight conduits, rigging tubes, or a hardtop before the plug can be installed, or when a damaged end needs to be re-terminated without replacing the whole run. Garmin Marine Network cabling uses a crossover arrangement and the cable run between devices should not exceed 100 m.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eField-terminable RJ45 connection for Garmin Marine Network cabling, useful after routing cable through chases and tight pass-throughs\u003c\/li\u003e\n\u003cli\u003eConnector housing with strain relief and an O-ring to help keep the termination sealed at the plug end\u003c\/li\u003e\n\u003cli\u003eSupplied copper tape supports proper shield and drain wire termination on shielded Ethernet cable\u003c\/li\u003e\n\u003cli\u003eSupports the side A and side B terminations used to create the required crossover cable for Garmin Marine Network\u003c\/li\u003e\n\u003cli\u003eIntended for Garmin Marine Network runs up to 100 m between devices\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cable route first, then terminate once the cable is in place. Installation requires a standard RJ45 modular plug crimping tool, plus a 15 mm wrench to snug the strain-relief nut.\u003c\/p\u003e\u003cp\u003eGarmin Marine Network terminations are not the same on both ends. Match the wire order to the correct side A or side B arrangement, then crimp the plug, seat it into the housing, tighten the strain-relief nut without overtightening, and fit the O-ring onto the housing.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis connector kit is for Garmin Marine Network connections that use a sealed RJ45-style termination. It is meant to become the cable end, not a coupler or adapter for standard office Ethernet hardware.\u003c\/p\u003e\u003cp\u003eWhen building custom cables from bulk wire, use shielded Ethernet cable with a drain wire so the copper tape and housing can terminate the shield correctly. Leave enough clearance behind the connected device to tighten the strain relief and avoid sharp bends at the plug.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon uses include adding a radar scanner on a hardtop, rerouting a network cable between helm electronics and a remote module, or repairing a connector after a pull-through that nicked the plug. Keeping a spare pair onboard can help get radar or sonar data sharing back online without waiting for a replacement cable run.\u003c\/p\u003e\u003cp\u003eThis is a good match for DIY installers and technicians who are building custom Garmin Marine Network cable runs, cleaning up cable routing, or maintaining service spares for offshore and coastal boats.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 x marinized RJ45 connector housings with strain relief\u003c\/li\u003e\n\u003cli\u003e2 x RJ45 modular plugs\u003c\/li\u003e\n\u003cli\u003eO-rings\u003c\/li\u003e\n\u003cli\u003eCopper tape strips for shield and drain wire termination\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550364958966,"sku":"APL030822","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1279900_apl030822.jpg?v=1787792129"},{"product_id":"apl846546","title":"Garmin ECHOMAP UHD2 55cv Chartplotter\/Fishfinder, 5\" Keyed Display, GT20-TM Transducer Included, CHIRP Traditional, ClearVü, Navionics+ Canada and Alaska Mapping, Wi-Fi, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02592-50 is a 5-inch chartplotter and sonar combo that comes with Garmin Navionics+ Canada inland mapping and a GT20-TM transducer for traditional CHIRP and ClearVu scanning sonar. It runs on 9 to 18 Vdc, draws about 600 mA typical at 12 Vdc, and carries an IPX7 water rating for typical console and open-helm installs.\u003c\/p\u003e\u003cp\u003eThe WVGA display is 800 x 480 pixels, with a viewable area of 109 x 65.8 mm (4.3 x 2.6 in.). The unit itself measures 188 x 122 x 61.5 mm (7.4 x 4.8 x 2.4 in.), which makes it a practical fit on smaller boats where dash space is tight but you still want charts, waypoints, and depth in one place.\u003c\/p\u003e\u003cp\u003eBuilt-in Wi-Fi handles wireless sharing with compatible chartplotters and phone pairing for the ActiveCaptain app, so updates and chart management can be done without pulling the unit off the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5-inch WVGA display (800 x 480) with a keyed interface that stays easy to use with wet hands\u003c\/li\u003e\n\u003cli\u003e9 to 18 Vdc input for most 12V systems; protects with a 3 A fast-acting fuse on the power lead\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for helm mounting where spray and washdowns happen\u003c\/li\u003e\n\u003cli\u003eTraditional CHIRP and ClearVu CHIRP sonar support; includes GT20-TM transducer (77\/200 kHz traditional and 455\/800 kHz ClearVu)\u003c\/li\u003e\n\u003cli\u003ePreloaded Garmin Navionics+ Canada inland content with up to 1 ft contours where available\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi for wireless sharing and for pairing with the ActiveCaptain mobile app\u003c\/li\u003e\n\u003cli\u003emicroSD card slot for chart management and updates (supports up to 1 TB)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePower it from a clean DC feed that stays within the 9 to 18 Vdc range, and keep the power\/data cable routed away from high-current wiring where possible to reduce sonar noise. The recommended fuse rating is 3 A fast-acting, which is helpful when you are planning a small electronics bus or adding it to an existing helm breaker panel.\u003c\/p\u003e\u003cp\u003eMount it on the included tilt mount when you want to adjust viewing angle at the helm, or flush mount it into a dash panel for a more built-in look. Plan for cable bend radius and service access behind the unit; 57 mm (2.25 in.) of clearance behind the chartplotter is a good target before the connector run turns.\u003c\/p\u003e\u003ch6\u003eSonar and transducer notes\u003c\/h6\u003e\u003cp\u003eThe included GT20-TM transducer mounts on a transom or trolling motor and uses a 4-pin connection, with a 20 ft cable and a built-in temperature sensor. Take time to set the transducer level and square to the waterline so it holds bottom cleanly when the boat comes up on plane.\u003c\/p\u003e\u003cp\u003eDepth performance varies with transducer installation, water salinity, bottom type, and conditions. The unit lists sonar depth capability up to 701 m (2,300 ft) at 77 kHz.\u003c\/p\u003e\u003ch6\u003eCharting and connectivity\u003c\/h6\u003e\u003cp\u003eWith Garmin Navionics+ Canada inland mapping preloaded, you can run charts right away and manage regions or updates through the microSD slot. Wi-Fi supports sharing sonar, waypoints, and routes with another compatible chartplotter, and it pairs with the ActiveCaptain app for software and chart updates.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis setup makes sense for inland lake fishing rigs, aluminum boats, bass boats, and compact center consoles that need one screen to handle both navigation and fishfinding. Before you commit to a flush install, confirm your dash cutout and plan how you will reach the microSD slot and rear connections for updates and seasonal service.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eECHOMAP UHD2 5-inch chartplotter\u003c\/li\u003e\n\u003cli\u003eGT20-TM transducer\u003c\/li\u003e\n\u003cli\u003ePower\/data cable\u003c\/li\u003e\n\u003cli\u003eTilt mount\u003c\/li\u003e\n\u003cli\u003eFlush mount\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550365810934,"sku":"APL846546","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834695_apl846546.jpg?v=1787792178"},{"product_id":"apl049322","title":"Garmin ECHOMAP Ultra 2 Chartplotter\/Fishfinder Combo, LiveScope Support, SideVü Sonar, ClearVü Sonar, Multi-Band GPS, Wi-Fi Networking, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin ECHOMAP Ultra 2 122sv is a chartplotter and fishfinder combo that puts mapping, GPS, and scanning sonar on one helm-friendly touchscreen. It runs on 9 to 18 VDC and carries an IPX7 water rating, so it fits cleanly into typical 12V marine electronics installs at a console, tower, or dash.\u003c\/p\u003e\u003cp\u003eThis listing covers the ECHOMAP Ultra 2 sv family in multiple screen sizes (10\", 12\", and 16\") and bundle options. Across the range you get multi-band GPS for tighter position holding, built-in sonar support rated at 600 W, and support for LiveScope when paired with a compatible LiveScope setup. Networking features make it practical to share data with other electronics on board, and two microSD card slots keep charts and user data easy to manage.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eScreen size choices across the family: 10\", 12\", or 16\" class touchscreens with keyed assist for wet hands and quick inputs\u003c\/li\u003e\n\u003cli\u003ePower input 9 to 18 VDC for standard 12V boats (a regulated step-down is needed on 24V systems)\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for open-boat installs and routine washdowns\u003c\/li\u003e\n\u003cli\u003eBuilt-in sonar support rated at 600 W, including CHIRP traditional plus ClearVü and SideVü scanning when paired with a compatible transducer\u003c\/li\u003e\n\u003cli\u003eLiveScope support for live-scanning sonar when used with a compatible LiveScope system\u003c\/li\u003e\n\u003cli\u003eMulti-band, multi-constellation GPS receiver for improved position accuracy\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 network compatibility for bringing heading, engine data, autopilot data, and other NMEA information onto the display\u003c\/li\u003e\n\u003cli\u003eWi-Fi and ActiveCaptain support for software updates, screen recording, and sharing data like Quickdraw Community contours\u003c\/li\u003e\n\u003cli\u003eTwo microSD card slots for charts and data storage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations that vary by display size (10\", 12\", or 16\"), chart package (Worldwide basemap or Garmin Navionics+), and whether a transducer is included. Transducer bundles include the GT56UHD-TM transducer.\u003c\/p\u003e\u003cp\u003eThe mapping option changes what is ready to use on day one, and Garmin Navionics+ packages include a 1-year subscription for chart updates. Screen specs also differ by size: the 10\" and 12\" units use 1280 x 800 resolution, while the 16\" unit uses 1920 x 1080 resolution.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting can be done with a bail mount or as a flush install, depending on how you want the display to sit at the helm. Plan cable routing early so the power lead, network connections, and transducer cable have strain relief and a dry path behind the dash, especially on center consoles that see spray and vibration.\u003c\/p\u003e\u003cp\u003ePower requirements scale with screen size. Typical current draw at 12 VDC is 2.5 A on the 10\" and 12\" units, and 3.9 A on the 16\" unit. A dedicated, fused feed from a clean electronics bus helps keep sonar performance stable and reduces interference.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eIf your boat already has an NMEA 2000 backbone, the unit can be tied in to display shared data like heading and other NMEA information on the chart and sonar pages. On larger systems, the chartplotter can also be part of a wider Garmin setup, including wireless features through ActiveCaptain and compatible device-to-device sharing.\u003c\/p\u003e\u003cp\u003eOn fishing boats that run a Garmin Force trolling motor, wireless control features can be used for tasks like navigating to waypoints and following routes, keeping hands on the rod while the boat stays on the line.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup fits anglers who want charting and scanning sonar in one place for structure fishing, coastal passes, and nearshore runs, and it also suits cruisers who want a clear navigation screen with modern GPS accuracy. The larger 16\" screen is a better match when the display needs to be read from a distance, like on a wide helm or dual-station layout.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray off the screen and connectors with fresh water after harsh days, and avoid harsh solvents when cleaning the display. Periodic checks of mount hardware and cable strain relief are worthwhile on boats that see rough water, since vibration is what loosens electronics over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Garmin Navionics+ \/ 16\" \/ Yes","offer_id":51550366564598,"sku":"APL049322-V5","price":4799.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ 12\" \/ Yes","offer_id":51550366597366,"sku":"APL049322-V4","price":3299.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ 10\" \/ No","offer_id":51550366630134,"sku":"APL049322-V8","price":2099.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ 16\" \/ No","offer_id":51550366662902,"sku":"APL049322-V10","price":4599.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide Basemap \/ 10\" \/ No","offer_id":51550366695670,"sku":"APL049322-V11","price":2099.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide Basemap \/ 10\" \/ Yes","offer_id":51550366728438,"sku":"APL049322-V1","price":2499.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide Basemap \/ 12\" \/ No","offer_id":51550366761206,"sku":"APL049322-V2","price":2899.99,"currency_code":"USD","in_stock":false},{"title":"Worldwide Basemap \/ 16\" \/ No","offer_id":51550366793974,"sku":"APL049322-V12","price":4599.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ 10\" \/ Yes","offer_id":51550366826742,"sku":"APL049322-V3","price":2499.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide Basemap \/ 16\" \/ Yes","offer_id":51550366859510,"sku":"APL049322-V6","price":4799.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ 12\" \/ No","offer_id":51550366892278,"sku":"APL049322-V9","price":2899.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide Basemap \/ 12\" \/ Yes","offer_id":51550366925046,"sku":"APL049322-V7","price":3299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281647_apl049322_jpeg.jpg?v=1787792094"},{"product_id":"apl512077","title":"Garmin GPSMAP 8x24 Protective Cover, For GPSMAP 8424\/8624","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12390-46 is a protective cover sized for GPSMAP 8x24 marine chartplotter displays, including the GPSMAP 8424 and 8624 series.\u003c\/p\u003e\u003cp\u003eIt is the piece you put on when the boat is sitting at the dock, on the trailer, or getting rinsed down after a day on the water. Covering the display face helps keep sun, salt haze, and cockpit dust off the screen so the unit is ready to go when you power up again.\u003c\/p\u003e\u003cp\u003eBecause GPSMAP displays come in different sizes, the fit is the main thing to confirm. If your unit is an 8x24 model, the cover sits over the front of the display to help protect it while it is not in use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Garmin GPSMAP 8x24-series displays, including GPSMAP 8424 and GPSMAP 8624 series chartplotters\u003c\/li\u003e\n\u003cli\u003eCovers the display face between trips to help limit sun exposure and keep spray residue off the screen\u003c\/li\u003e\n\u003cli\u003eNo wiring or power connections involved; it is a physical cover that goes on and off over the display\u003c\/li\u003e\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is made for GPSMAP 8x24 units, so it is intended for the larger 24-inch displays in that family. Match the model on your MFD (for example 8424 or 8624) before ordering to avoid mix-ups with other GPSMAP sizes.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats with an exposed helm, a flybridge, or any installation where the display is regularly left in direct sun between trips. It also helps when the boat is stored under a canvas, where dust and accidental scuffs are common.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eBefore covering the display, give the screen and bezel a quick rinse or wipe so you are not trapping grit against the glass. Store the cover flat where it will not get bent or stepped on when it is off the unit.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550367678710,"sku":"APL512077","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695887_apl425755_jpeg.jpg?v=1787792253"},{"product_id":"apl227485","title":"Garmin Rudder Feedback Cable, For GHP 12 Autopilots","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11532-00 is a rudder feedback cable used with compatible Garmin autopilot installations to pass rudder position feedback to the autopilot system. It is commonly used as a replacement cable for GHP 12 sailboat autopilot setups, and it is also used in certain Reactor 40 mechanical or solenoid retrofit installations when pairing the autopilot with a third-party rudder sensor.\u003c\/p\u003e\u003cp\u003eThis is a service cable, not a rudder sensor or rudder reference unit by itself. If you are chasing inconsistent steering, rudder angle faults, or a feedback unit that drops out when the boat is pounding, replacing a suspect cable can be a straightforward first step before pulling sensors or course computers. Packaged size is about 5 in. x 5 in. x 1 in., with a shipping weight around 0.09 lb.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement rudder feedback cable for Garmin GHP 12 sailboat autopilot systems\u003c\/li\u003e\n\u003cli\u003eUsed in certain Reactor 40 mechanical or solenoid retrofit installations when connecting a third-party rudder sensor\u003c\/li\u003e\n\u003cli\u003eCarries rudder position feedback so the autopilot can steer with better awareness of rudder movement\u003c\/li\u003e\n\u003cli\u003eCompact spare part that is easy to keep onboard for troubleshooting and quick repairs\u003c\/li\u003e\n\u003cli\u003eWARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm that your autopilot setup expects a separate rudder feedback input and that the cable ends match what is already installed on your boat. This part is associated with GHP 12 rudder feedback installations and with Reactor 40 retrofit configurations that use a third-party rudder sensor rather than a Garmin GRF 10 sensor.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cable run the same way you would for any sensitive helm electronics: keep it supported, protected from chafe, and routed away from hot engine components and moving steering gear. Leave a drip loop where the cable enters enclosures, and secure the run so vibration does not work the connectors loose over time.\u003c\/p\u003e\u003cp\u003eBefore pulling the old cable out of conduits, label both ends and verify you can pull a replacement through the same path. On sailboats, the rudder feedback wiring often runs from the quadrant area to a dry mounting location near the autopilot course computer, so pay attention to moisture protection and strain relief at both ends.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the cable run for crushed sections, tight bends, and abrasion points near bulkheads or steering linkages. If the connectors are in a damp locker, keep them clean and dry and address any green corrosion early so the rudder feedback signal stays consistent when the boat is in motion.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550370857206,"sku":"APL227485","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694154_apl227485_jpeg.jpg?v=1787792376"},{"product_id":"apl570960","title":"Garmin GPSMAP 8x17 Chartplotter Protective Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12390-44 is a protective cover made for GPSMAP 8x17 chartplotter displays (17-inch models). It’s a simple way to keep the screen and front bezel covered when the boat is sitting at the dock, on a trailer, or under a helm cover where dust and salt film can build up.\u003c\/p\u003e\u003cp\u003eOn boats that see regular washdowns or live outside, this cover helps keep spray residue, fingerprints, and light scuffs off the display face between runs, so you spend less time cleaning the screen before you head out.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSized specifically for Garmin GPSMAP 8x17 chartplotter displays (17-inch units)\u003c\/li\u003e\n\u003cli\u003eCovers the display face and bezel to help keep salt film, dust, and sun exposure down while the unit is not in use\u003c\/li\u003e\n\u003cli\u003eQuick to put on and remove for day-to-day use at the helm\u003c\/li\u003e\n\u003cli\u003eHelps protect the screen from incidental contact when gear is moved around the console or when a canvas cover rubs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is intended for GPSMAP 8x17 devices. Garmin uses similar naming across different screen sizes, so it is worth confirming your exact model before ordering. If your display is an 8x22 or 8x24 size, it uses a different cover.\u003c\/p\u003e\u003cp\u003eFor best results, make sure the display has enough clearance around the front bezel for the cover to seat fully, especially on tight flush-mount installs.\u003c\/p\u003e\u003ch6\u003eInstallation and day-to-day use\u003c\/h6\u003e\u003cp\u003eThere is no wiring or setup. Place the cover over the front of the display when the unit is off, then remove it before getting underway. If you rinse the helm, let the screen area dry first so you are not trapping moisture against the face.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the cover with fresh water after saltwater days and wipe it clean with a soft cloth. Avoid harsh solvents and abrasive pads that can dull the surface.\u003c\/p\u003e\u003cp\u003eThis is a good match for open-console boats, pilothouses, and flybridges where the display is regularly exposed between trips, especially on coastal cruising and fishing boats that see frequent spray and washdowns.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550373642486,"sku":"APL570960","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695554_apl570960_jpeg.jpg?v=1787792508"},{"product_id":"apl126184","title":"Garmin STRIKER Vivid GPS Fishfinder, ClearVü, Traditional CHIRP","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin STRIKER Vivid is a fishfinder and GPS combo that pairs sonar views with a color display for finding fish, reading structure, and saving spots you want to come back to.\u003c\/p\u003e\u003cp\u003eThis family covers 4-inch, 5-inch, 7-inch, and 9-inch displays, with configurations that include Traditional CHIRP plus ClearVü, and select options that add SideVü. The unit runs on 12 to 20 Vdc, carries an IPX7 water rating, and uses a 3 A fast-acting fuse (rated current 1.5 A), which lines up well with typical 12 V boat electrical systems.\u003c\/p\u003e\u003cp\u003eFor anglers who like to build their own bottom picture over time, Quickdraw Contours lets you record maps with 1-foot contours. Recording requires sonar depth, your GPS position, and a memory card with free space.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eChoice of 4-inch, 5-inch, 7-inch, or 9-inch display, depending on the selected configuration\u003c\/li\u003e\n\u003cli\u003eSonar configurations include Traditional CHIRP with ClearVü, with select options adding SideVü\u003c\/li\u003e\n\u003cli\u003eBuilt-in GPS for waypoint marking, route planning, and on-screen boat speed\u003c\/li\u003e\n\u003cli\u003eQuickdraw Contours recording for custom maps with contours and depth labels (memory card required for recording)\u003c\/li\u003e\n\u003cli\u003eInput power: 12 to 20 Vdc with a 3 A fast-acting fuse (rated current 1.5 A)\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for the realities of spray, rain, and routine washdowns\u003c\/li\u003e\n\u003cli\u003eTemperature range from -15 to 55 C (5 to 131 F) for early mornings, hot helms, and shoulder-season trips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations. The differences between options are the display size and the sonar type.\u003c\/p\u003e\u003cp\u003eAcross the STRIKER Vivid family, the unit operates from 12 to 20 Vdc and is rated IPX7. Sonar views vary by configuration, with some packages adding SideVü coverage in addition to ClearVü and Traditional CHIRP.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-02550-00: Display size 4-inch; sonar type ClearVü and Traditional CHIRP. Includes a GT20-TM transducer with a 20 ft cable for down-looking ClearVü and Traditional CHIRP returns when mounted on the transom or a trolling motor.\u003c\/li\u003e\n\u003cli\u003e010-02551-00: Display size 5-inch; sonar type ClearVü and Traditional CHIRP. Includes a GT20-TM transducer with a 20 ft cable, which is a common fit for smaller consoles where screen space is limited but you still want ClearVü detail.\u003c\/li\u003e\n\u003cli\u003e010-02552-00: Display size 7-inch; sonar type ClearVü and Traditional CHIRP. Includes a GT20-TM transducer with a 20 ft cable, giving more screen area for splitting views and reading returns while running or trolling.\u003c\/li\u003e\n\u003cli\u003e010-02553-00: Display size 7-inch; sonar type SideVü, ClearVü and Traditional CHIRP. Includes a GT52HW-TM transducer, which adds SideVü coverage to help scan structure to port and starboard while you idle along banks or edges.\u003c\/li\u003e\n\u003cli\u003e010-02554-00: Display size 9-inch; sonar type SideVü, ClearVü and Traditional CHIRP. Includes a GT52HW-TM transducer, pairing the larger screen with SideVü for easier interpretation when you want more separation between sonar panes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location with a clear sightline from the helm and enough room to tilt the unit for glare control. A bracket-style setup works well on most center consoles, side consoles, and compact helm pods, and it also keeps service access simple for the power and transducer connections.\u003c\/p\u003e\u003cp\u003eTransducer placement matters more than most people expect. Mount it where it stays in clean water at speed and is clear of strakes, steps, and heavy turbulence. Route the cable to avoid sharp bends and areas where it can be crushed by hatches or pinched by steering and throttle movement.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower is straightforward on a 12 V boat: the unit accepts 12 to 20 Vdc, draws up to 1.5 A, and uses a 3 A fast-acting fuse. On boats with noisy electrical systems, it helps to keep the fishfinder wiring away from ignition components and high-current motor feeds, and to make sure the connections are fully seated so the unit does not appear to lose power underway.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eBuilt-in GPS is most useful when you treat it like a fishing log: mark waypoints for productive edges, reefs, and bait holds, then use routes and tracks to repeat passes. GPS reception improves when the unit has a clear view of the sky; when it is mounted inside a cabin, placing it close to a window helps.\u003c\/p\u003e\u003cp\u003eThis setup fits skiffs, bay boats, center consoles, and small offshore rigs that want an easy fishfinder with GPS and Quickdraw mapping, without moving into a full networked chartplotter system.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater days, rinse the exterior with fresh water and wipe the screen with a soft cloth. Periodically check the transducer face for growth and confirm the mounting hardware has not loosened from vibration, especially after trailering or rough-water runs.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"5\" \/ ClearVü and Traditional CHIRP","offer_id":51550380916982,"sku":"APL126184-V2","price":349.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ SideVü, ClearVü and Traditional CHIRP","offer_id":51550380949750,"sku":"APL126184-V4","price":519.99,"currency_code":"USD","in_stock":true},{"title":"7\" \/ ClearVü and Traditional CHIRP","offer_id":51550380982518,"sku":"APL126184-V3","price":419.99,"currency_code":"USD","in_stock":true},{"title":"4\" \/ ClearVü and Traditional CHIRP","offer_id":51550381015286,"sku":"APL126184-V1","price":199.99,"currency_code":"USD","in_stock":true},{"title":"9\" \/ SideVü, ClearVü and Traditional CHIRP","offer_id":51550381048054,"sku":"APL126184-V5","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281809_apl126184.webp?v=1787792793"},{"product_id":"apl990278","title":"Garmin GT51M-THP Stainless Steel Thru-Hull Transducer Pair, CHIRP ClearVü\/SideVü, 600W 80-160 kHz, 500W 260\/455 kHz, 12-Pin, Depth\/Temp, Up to 25 Degree Deadrise","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01966-11 is a GT51M-THP stainless steel thru-hull transducer pair for traditional CHIRP plus CHIRP ClearVü and SideVü scanning sonar using a 12-pin connection. Traditional sonar runs mid-band CHIRP 80 to 160 kHz at 600 W, and the ClearVü and SideVü elements run 260 and 455 kHz at 500 W per element.\u003c\/p\u003e\u003cp\u003eThis is a port and starboard set that installs on both sides of the keel so the side-looking beams stay clear. It also includes a fast-response temperature sensor, and it is intended for hull deadrises under 25 degrees at the mounting location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThru-hull port and starboard transducer pair for ClearVü and SideVü scanning plus traditional CHIRP sonar\u003c\/li\u003e\n\u003cli\u003eTraditional CHIRP: 600 W, mid-band 80 to 160 kHz\u003c\/li\u003e\n\u003cli\u003eClearVü and SideVü elements: 500 W per element, 260 and 455 kHz\u003c\/li\u003e\n\u003cli\u003e12-pin connection through an included Y-cable to combine the pair at the display or sonar module\u003c\/li\u003e\n\u003cli\u003eBuilt-in fast-response temperature sensor for real-time surface readings\u003c\/li\u003e\n\u003cli\u003eStainless steel stems and thru-hull mounting hardware for secure installation below the waterline\u003c\/li\u003e\n\u003cli\u003eSpecified for hull deadrises less than 25 degrees at the install point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the install as a true pair: one transducer on the port side and one on the starboard side, positioned so the keel does not block SideVü coverage. Fairing blocks are used to match the transducer to the hull angle; when the deadrise at the mounting location exceeds 5 degrees, a fairing block is required, and the cutting angle is limited to 25 degrees.\u003c\/p\u003e\u003cp\u003eBecause this is a thru-hull installation, take the same care you would with any below-waterline fitting: confirm internal clearance before drilling, seal any exposed core, and bed the hardware properly so it stays watertight through temperature swings and vibration.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer set is meant for Garmin sonar systems that support traditional CHIRP plus ClearVü and SideVü scanning and accept a 12-pin transducer connection. Match the supported sonar types and frequency ranges to your display or black box before ordering, especially if you are moving from an 8-pin or older transducer style.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eOn coastal runs, reef fishing, and deeper structure work, this setup gives you a traditional CHIRP view for arches and bottom separation alongside scanning views that help you read edges, bait, and bottom changes to both sides of the boat. It is a good match for boats where a single side-looking transducer would have its view shaded by the keel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior after saltwater use and keep the faces clear of paint buildup and marine growth so the sonar stays consistent. During routine haul-out or diver checks, inspect the stems, bedding, and cable routing for signs of movement, abrasion, or seepage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo thru-hull transducers (port and starboard) with stainless steel stems\u003c\/li\u003e\n\u003cli\u003eFairing blocks\u003c\/li\u003e\n\u003cli\u003eY-cable\u003c\/li\u003e\n\u003cli\u003eBushings\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550381867254,"sku":"APL990278","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694385_apl990278_jpeg.jpg?v=1787792839"},{"product_id":"apl892585","title":"Garmin LiveScope Plus LVS34 Live Sonar Transducer, For GLS 10, 530-1100 kHz, 200 ft Range, Forward\/Down\/Perspective","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin LiveScope Plus System with GLS 10 \u0026amp; LVS34 is a live scanning sonar setup that pairs the LVS34 transducer with the GLS 10 black box so your compatible Garmin chartplotter can show real-time views of fish and structure around the boat.\u003c\/p\u003e\u003cp\u003eThe LVS34 operates from 530 to 1,100 kHz and is rated for up to 61 m (200 ft) of depth\/distance, with a field of view of 135 degrees front-to-back and 20 degrees side-to-side. The transducer body measures 161.7 x 77.5 x 47.8 mm (6.37 x 3.05 x 1.88 in.) and weighs 1018 g (2.25 lb.).\u003c\/p\u003e\u003cp\u003eThe GLS 10 mounts out of the way in a protected location and connects to your display over the Garmin Marine Network. It runs on 10 to 32 Vdc and uses 21 W typical power, with 58 W max for peak draw.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLive scanning sonar views with Forward, Down, and Perspective modes when the transducer is mounted and oriented for the view you want\u003c\/li\u003e\n\u003cli\u003eAuto stabilization that keeps the sonar view steady on the chartplotter screen in rougher conditions and accounts for transducer orientation\u003c\/li\u003e\n\u003cli\u003eLVS34 operating range: 530 to 1,100 kHz, up to 61 m (200 ft) depth\/distance, 135 degrees x 20 degrees field of view\u003c\/li\u003e\n\u003cli\u003eGLS 10 power input: 10 to 32 Vdc, 21 W typical power usage (58 W max)\u003c\/li\u003e\n\u003cli\u003eGLS 10 data output over Garmin Marine Network for integration with compatible Garmin chartplotters\u003c\/li\u003e\n\u003cli\u003eTransducer size and weight suited to common trolling motor, shaft, and Perspective-style mounting positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on whether the GLS 10 sonar module is included.\u003c\/p\u003e\u003cp\u003eThe LVS34 transducer and the mounting hardware come with both options. The configuration with the sonar module adds the GLS 10 plus the power and network cabling needed to connect it into your Garmin Marine Network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-02706-00 (Sonar Module Included: Yes). This is the complete package for a first-time LiveScope Plus install where you need the GLS 10 black box as well as the LVS34 transducer.\u003c\/li\u003e\n\u003cli\u003e010-02706-10 (Sonar Module Included: No). This is the LVS34 transducer package for upgrading an existing GLS 10 setup, keeping the same sonar module and swapping to the newer transducer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis system relies on a compatible Garmin chartplotter and a Garmin Marine Network connection between the display and the GLS 10. Plan your install around where the transducer will live (trolling motor barrel, shaft, or a separate pole) and where the GLS 10 can be mounted in a dry, serviceable spot with clean power.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the LVS34 so it has a clear view of the water and can be rotated between Forward, Down, and Perspective orientations as needed. Run the transducer cable back to the GLS 10 with gentle bends and chafe protection, then connect the GLS 10 to the chartplotter over the Garmin Marine Network and supply 10 to 32 Vdc power from your boat’s distribution panel with appropriate circuit protection.\u003c\/p\u003e\u003cp\u003eOnce powered, use the chartplotter’s LiveScope settings to confirm the correct viewing mode and orientation, then fine-tune gain and range for the water depth, speed, and bottom type you typically fish.\u003c\/p\u003e\u003ch6\u003eWho it fits best\u003c\/h6\u003e\u003cp\u003eThis setup is a strong match for anglers who want real-time feedback while working a trolling motor or scanning structure before making a drift. It also fits boats where you can dedicate a clean network run and a protected mounting location for the GLS 10, so the system stays easy to service season after season.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"No","offer_id":51550382096630,"sku":"APL892585-V2","price":1299.99,"currency_code":"USD","in_stock":false},{"title":"Yes","offer_id":51550382129398,"sku":"APL892585-V1","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1266788_apl892585_jpeg.jpg?v=1787792859"},{"product_id":"apl516753","title":"Garmin ECHOMAP UHD2 93sv LiveScope Plus Ice Fishing Bundle LI, 9in Touchscreen Display, LVS34-IF Transducer, 16.5Ah Li-Ion Battery, Garmin Navionics+ U.S. Inland Maps","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02688-35 is a portable ice-fishing bundle that pairs an ECHOMAP UHD2 93sv 9-inch combo with the LiveScope Plus System and a 16.5Ah lithium-ion battery. You get a hybrid-touch display with keyed assist (1024 x 600), preloaded Garmin Navionics+ lake charts covering more than 23,000 U.S. lakes, and a complete LiveScope setup with the LVS34-IF transducer and GLS 10 sonar module.\u003c\/p\u003e\u003cp\u003eLiveScope Forward and Down views show real-time sonar so you can track your jig and see fish reactions as they happen, with live sonar range up to 200 ft. The kit is built around a portable bag and mounts for quick setup on the ice, with an overall packed size of 13.8 x 12.2 x 13.0 in and a listed weight of 22.5 lb.\u003c\/p\u003e\u003cp\u003eIt also makes a solid crossover unit for open-water season, since the display supports built-in CHIRP, ClearVü, and SideVü sonar (500 W), plus network options that let you tie into a larger onboard electronics setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-inch hybrid-touch display with keyed assist, 1024 x 600 resolution\u003c\/li\u003e\n\u003cli\u003eLiveScope Plus System with LVS34-IF transducer and GLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003eLiveScope Forward and Down views with live sonar range up to 200 ft\u003c\/li\u003e\n\u003cli\u003ePreloaded Garmin Navionics+ charts for more than 23,000 U.S. lakes\u003c\/li\u003e\n\u003cli\u003eRuns on 9 to 18 V DC power and includes a 16.5Ah lithium-ion battery for portable use\u003c\/li\u003e\n\u003cli\u003eBuilt-in CHIRP, ClearVü, and SideVü sonar support with 500 W output\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for wet-weather use and quick wipe-downs after a day on the ice\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eECHOMAP UHD2 93sv chartplotter and fishfinder\u003c\/li\u003e\n\u003cli\u003eLiveScope Plus LVS34-IF transducer\u003c\/li\u003e\n\u003cli\u003eGLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003eIce fishing pole mount\u003c\/li\u003e\n\u003cli\u003eTilt mount\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003ePortable fishing bag with handle\u003c\/li\u003e\n\u003cli\u003eLithium-ion battery (16.5Ah)\u003c\/li\u003e\n\u003cli\u003eBattery charger\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eOn the ice, the workflow is straightforward: set the bag on a stable surface, mount the display on the tilt bracket, then attach the transducer to the pole mount and lower it through the hole. Keeping the transducer steady makes it easier to interpret fish movement and jig shows, especially in LiveScope Forward where you are scanning ahead of the hole.\u003c\/p\u003e\u003cp\u003eThe LiveScope transducer cable stays flexible in freezing conditions, which helps when you are moving spot to spot. Leave enough slack to rotate and aim the pole without tugging on connectors, and keep connections tucked inside the bag when snow or slush is blowing around.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe display power input is 9 to 18 V DC, and the bundle includes a lithium-ion battery and charger for portable power. For longer days, keep the battery out of direct wind and snow whenever possible, and charge it after trips rather than storing it partially depleted.\u003c\/p\u003e\u003cp\u003eWhen you move the unit onto a boat, wire it to a properly fused 12 V circuit within the 9 to 18 V range. The display supports NMEA 2000 networking and includes a Garmin Marine Network port, so it can integrate with compatible sensors and accessories in a marine electronics system.\u003c\/p\u003e\u003ch6\u003eCharts, data, and storage\u003c\/h6\u003e\u003cp\u003eGarmin Navionics+ lake charts come preloaded, which helps when you are hopping around unfamiliar water and want quick depth context near points, humps, and basin edges. The unit accepts one microSD card (up to 32 GB) for additional mapping and data management.\u003c\/p\u003e\u003ch6\u003eUse on board and who it fits\u003c\/h6\u003e\u003cp\u003eThis bundle is a strong match for anglers who want LiveScope plus a larger screen in a portable format for hole-hopping, or for anyone who wants to run the same electronics through ice season and then move the display to a boat for spring and summer. It works well for fish that suspend and roam, where watching movement in real time changes how you position and present.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe unit carries an IPX7 water rating, but connectors still deserve attention in wet conditions. After use, wipe down the bag and gear, let everything dry before packing it away, and keep plugs clean so they seat fully the next time you set up.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550385209590,"sku":"APL516753","price":3299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696392_apl516753_jpeg.jpg?v=1787792915"},{"product_id":"apl273212","title":"Garmin Extra Large Carry Bag \u0026 Base, For ECHOMAP Plus 9in, Panoptix LiveScope","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12676-05 is an extra large carry bag and base meant to carry and protect an ECHOMAP Plus 9-inch combo with a Panoptix LiveScope system when you are moving a portable setup on and off the boat.\u003c\/p\u003e\u003cp\u003eIt is built for real-world handling at the ramp and dock, and the glove-friendly design makes pack-up less fussy when your hands are wet or you are wearing gloves.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to carry and protect an ECHOMAP Plus 9-inch combo and a Panoptix LiveScope system\u003c\/li\u003e\n\u003cli\u003eBag and base set for transporting a portable electronics setup between boat, dock, and storage\u003c\/li\u003e\n\u003cli\u003eGlove-friendly design for easier handling during cold-weather or wet-deck pack-up\u003c\/li\u003e\n\u003cli\u003eExtra large format intended to keep the display and LiveScope components together during transport\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eExtra large carry bag\u003c\/li\u003e\n\u003cli\u003eBase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bag and base is sized around the ECHOMAP Plus 9-inch combo and a Panoptix LiveScope system. Confirm your display is the 9-inch ECHOMAP Plus format before ordering, especially if you run a different series or a larger screen size.\u003c\/p\u003e\u003cp\u003eIt is meant for transport and storage of a portable setup, not for replacing a fixed mount or changing any wiring on the boat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers who run LiveScope as a portable kit, and for boaters who remove their display after each trip for security or off-season storage. It also makes sense if your electronics ride in the tow vehicle during trailering rather than staying on the console.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eBefore packing electronics away, let them dry and wipe off moisture and grime so you are not trapping it in storage. After saltwater use, a quick wipe-down and dry-out helps keep everything in better shape between trips.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550388388086,"sku":"APL273212","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695884_apl273212_jpeg.jpg?v=1787793038"},{"product_id":"apl977813","title":"Garmin GPSMAP 7xx Bail Mount with Knobs, For 720\/720s\/740\/740s","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11483-00 is a bail mount with knobs for surface-mounting compatible GPSMAP chartplotters at the helm. It fits GPSMAP 720, 720s, 740, and 740s units with 7-inch displays, letting you set the screen angle with the side knobs and keep it locked in place once you are happy with the view.\u003c\/p\u003e\u003cp\u003eThis is the mounting bracket hardware only, not the display itself. It is a practical way to mount a GPSMAP on a dash top, electronics pod, or navigation station where you want easy access to the front controls and room behind the unit for cable routing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount bail bracket for GPSMAP 720, 720s, 740, and 740s fixed-mount units\u003c\/li\u003e\n\u003cli\u003eSide knobs allow quick angle adjustment and hold the position once tightened\u003c\/li\u003e\n\u003cli\u003eRaises the display off the mounting surface, helping with access behind the unit for connectors and cable bend radius\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement when an existing bracket is worn, cracked, or missing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBail mount bracket\u003c\/li\u003e\n\u003cli\u003eMounting knobs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is specific to Garmin GPSMAP 720, 720s, 740, and 740s models. If your GPSMAP model number differs, confirm the bracket style and mounting interface before ordering to avoid a mismatch.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the location so the screen can tilt through its range without hitting a windshield frame, wheel, or throttle controls. Leave enough space behind the unit for the connectors and for routing the cable run without sharp bends.\u003c\/p\u003e\u003cp\u003eOn a boat, mount it to a solid, flat surface and use appropriate fasteners and backing support for the panel thickness. After the first few trips, recheck fasteners and knob tension, especially if the helm area sees vibration or repeated washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis bail mount is a good match for boaters keeping an older GPSMAP 7-inch display in service and wanting a straightforward helm mount that can be re-angled for different seating positions and lighting. It also suits refits where the original bracket is missing and the display needs a clean, stable mounting point again.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550391730422,"sku":"APL977813","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694226_apl977813_jpeg.jpg?v=1787793120"},{"product_id":"apl224630","title":"Garmin Alkaline Battery Pack, For Rino 610\/650\/655t, 4xAA","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11600-00 is an alkaline battery pack that lets a compatible Rino 610, 650, or 655t handheld run on four AA batteries when you need simple backup power away from charging. It’s a drop-in pack that sits inside the battery compartment, so there are no external wires to route or keep dry.\u003c\/p\u003e\u003cp\u003eOn a boat, this is a practical way to keep a Rino powered for dinghy runs, shore excursions, or as a spare handheld that lives in a ditch bag. AA cells are easy to find in marinas and coastal towns, and carrying a sealed spare set helps avoid downtime when your primary power option is unavailable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible fit for Garmin Rino 610, 650, and 655t handhelds\u003c\/li\u003e\n\u003cli\u003eHolds 4 AA batteries for on-the-go power (batteries not included)\u003c\/li\u003e\n\u003cli\u003eSwap-in internal pack that installs under the battery cover with no external cabling\u003c\/li\u003e\n\u003cli\u003eUseful as a stowed backup power option for tender trips, dockside errands, and emergency kits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eAlkaline battery pack for Garmin Rino 610, 650, and 655t\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis battery pack is intended for the Rino 610, Rino 650, and Rino 655t. If your handheld is a different Rino model or a different Garmin handheld platform, the pack may not seat correctly in the battery bay or align with the contacts.\u003c\/p\u003e\u003ch6\u003eInstallation and battery handling\u003c\/h6\u003e\u003cp\u003eLoad four AA batteries into the pack, following the polarity markings, then place the pack into the Rino’s battery compartment and close the battery door. AA batteries are not included, so plan to have a fresh set on hand before heading out.\u003c\/p\u003e\u003cp\u003eFor marine storage, remove the AA batteries if the unit will sit unused for long periods to reduce the risk of leakage. Keep spare cells in a watertight bag, and avoid opening the battery compartment with wet hands or spray present whenever possible.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boaters who rely on a Rino handheld away from the helm and want a backup power path that does not depend on onboard charging. It also suits crews who keep handheld electronics in a grab bag, where having a common AA-powered option can simplify spares planning.\u003c\/p\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550395695350,"sku":"APL224630","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694185_apl224630_jpeg.jpg?v=1787793247"},{"product_id":"apl596962","title":"Garmin Lithium-Ion Battery Pack","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11654-03 is a rechargeable lithium-ion battery pack that replaces the removable pack in compatible Garmin handhelds and VIRB cameras. It is a 3.7 V battery pack in the 2200 mAh class, suited to keeping a handheld GPS or action camera running when you are away from shore power or a 12V\/24V charger.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the kind of spare that lives in the nav bag or a dry box so a handheld still has power for long runs, dinghy trips, or time on deck where a fixed charger is not convenient. It is also a practical replacement when your original pack no longer holds a charge like it used to.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRechargeable lithium-ion battery pack (3.7 V, 2200 mAh class)\u003c\/li\u003e\n\u003cli\u003eSwaps in as a spare or replacement pack for supported Garmin devices\u003c\/li\u003e\n\u003cli\u003eHelps keep portable navigation and video gear powered when you are off the dock or away from a charging lead\u003c\/li\u003e\n\u003cli\u003eNo boat wiring required since it installs inside the device as the primary power source\u003c\/li\u003e\n\u003cli\u003eWorks well as a second pack to rotate through charging cycles on multi-day trips\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis battery pack is used across several Garmin portable platforms, including Alpha handhelds (such as Alpha 100, Alpha 200\/200i, and Alpha 300\/300i), Montana handheld GPS units (including the 600\/610\/650\/680 series), Monterra, VIRB, VIRB Elite, and aera 660. Match your device model and the battery part number used by your unit before ordering, since Garmin has multiple battery styles that are not interchangeable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is a simple battery swap: power the device down, open the battery compartment, remove the existing pack, and seat the contacts on the new pack the same way as the original. Check that the gasket and compartment area are clean before closing up so the device can keep its seal against spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis pack is a good match for boaters who rely on a handheld GPS as a backup navigator, carry an Alpha handheld on the water, or run a VIRB camera and want predictable runtime without hunting for a charging outlet. Keeping one charged spare on board also helps when the helm is busy and you need a portable device to stay powered for MOB drills, anchoring, or tracking waypoints from the foredeck.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eStore the battery in a dry place out of direct heat, and avoid leaving it in a cockpit locker that bakes in the sun. If the device gets splashed with saltwater, wipe the exterior down and keep the battery compartment area clean so the contacts stay free of corrosion and the door closes properly.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550398677238,"sku":"APL596962","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697245_apl596962_jpeg.jpg?v=1787793355"},{"product_id":"apl987436","title":"Garmin gWind Mast Bracket, For gWind\/gWind Wireless, For gWind Wireless 2","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12117-06 is a mast bracket for mounting a gWind family wind transducer at the masthead. It replaces a worn or broken bracket, or it can be used when you are setting up a new rig and want the sensor mounted cleanly and securely.\u003c\/p\u003e\u003cp\u003eThis bracket is made to fit Garmin gWind, gWind Wireless, and gWind Wireless 2 transducers. It is also used with Garmin wind instrument packs that include these sensors, including GNX Wireless Sail Pack 43, GNX Wireless Sail Pack 52, and GNX Wireless Wind Pack.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Garmin gWind, gWind Wireless, and gWind Wireless 2 wind transducers\u003c\/li\u003e\n\u003cli\u003eMasthead bracket style for a straightforward wind-sensor mounting point\u003c\/li\u003e\n\u003cli\u003eBlack finish that matches common masthead hardware and fittings\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement mount during re-rigging, mast work, or sensor service\u003c\/li\u003e\n\u003cli\u003eBracket only for the mount position; the wind transducer is a separate item\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the bracket where the wind transducer has clear rotation and an unobstructed airflow path, typically on the mast cap or masthead plate. Use fasteners that suit your mast material, seal any new holes appropriately, and isolate dissimilar metals if you are fastening to an aluminum mast to reduce corrosion over time. After stepping the mast, confirm the sensor sits square and has clearance from lights, antennas, and rigging.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bracket is intended for the gWind family wind transducers and is commonly paired with GNX Wireless wind instrument packs that use those sensors. It is not a universal bracket for other wind sensors, so match it to the gWind, gWind Wireless, or gWind Wireless 2 transducer you are installing.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe masthead is a tough environment with constant UV, spray, and vibration. Rinse with fresh water when practical, and check the mount and fasteners during routine rig inspections. This is a good match for sailors replacing a damaged masthead mount or cleaning up an installation while servicing the wind sensor.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550401331446,"sku":"APL987436","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695575_apl987436_jpeg.jpg?v=1787793505"},{"product_id":"apl936085","title":"Garmin Airmar B164-20 Tilted Element Thru-Hull Transducer, 20 Degree Tilt, 1kW, 50\/200 kHz, Depth\/Temp, Bronze Housing, 6-Pin Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11010-00 is a 1 kW, 50\/200 kHz thru-hull transducer with a fixed 20° tilted element and a 6-pin connector for traditional sonar depth and water temperature. It is built around a low-profile bronze housing that extends less than 6.35 mm (0.25 in) below the hull, which helps it stay out of harm’s way on trailer bunks and rollers.\u003c\/p\u003e\u003cp\u003eThe 20° internal tilt is meant to match hull deadrise angles from 16° to 24° at the mounting location, so the sonar beam points straight down when the boat is on plane. At 50 kHz it uses a wide beam (22°) for deeper water tracking, and at 200 kHz it uses a narrow beam (6°) for better bottom detail and target separation.\u003c\/p\u003e\u003cp\u003eThis is a bronze-housed thru-hull style that suits fiberglass or wood hulls and is not a fit for aluminum hulls. Depth performance is rated to 549 m (1,800 ft) at 50 kHz and 244 m (800 ft) at 200 kHz, depending on water conditions, bottom type, installation quality, and sounder settings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTraditional dual-frequency sonar at 50\/200 kHz with 1 kW RMS power\u003c\/li\u003e\n\u003cli\u003eFixed 20° tilted element for hull deadrise angles from 16° to 24° at the install point\u003c\/li\u003e\n\u003cli\u003eDepth and fast-response water temperature sensing (no speed function)\u003c\/li\u003e\n\u003cli\u003eLow-profile bronze thru-hull housing that extends less than 6.35 mm (0.25 in) below the hull\u003c\/li\u003e\n\u003cli\u003eBeam coverage: 22° at 50 kHz for wider deep-water coverage, 6° at 200 kHz for tighter detail\u003c\/li\u003e\n\u003cli\u003eThru-hull cutout size of 95 mm (3-3\/4 in) for typical fiberglass or wood installations\u003c\/li\u003e\n\u003cli\u003e6-pin connector for systems that use the Garmin 6-pin transducer port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm three things before ordering: your hull material, the deadrise where you plan to install, and the connector style at the sounder or sonar module. The 20° tilt is intended for 16° to 24° deadrise at the mounting location, and the bronze housing is intended for fiberglass or wood hulls.\u003c\/p\u003e\u003cp\u003eYour sonar must support 50\/200 kHz traditional sonar and a 1 kW transducer. If your Garmin device uses a different transducer port style than 6-pin, plan on using the correct adapter so the transducer can be connected without modifying the cable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a thru-hull install that requires drilling a 95 mm (3-3\/4 in) hole and bedding the housing with marine sealant. The arrow on the top of the transducer should be aligned toward the keel or centerline so the internal element angle matches the hull’s deadrise.\u003c\/p\u003e\u003cp\u003eAfter launching, check for leaks right away and keep an eye on the install during the first hours in the water. Avoid pulling or carrying the transducer by the cable, and route the cable where it will not chafe or get pinched by panels, hatches, or rigging tubes.\u003c\/p\u003e\u003ch6\u003eOn-water use notes\u003c\/h6\u003e\u003cp\u003eThe 50 kHz channel is the go-to when you are pushing deeper water and want bottom tracking farther down, while 200 kHz tightens the beam for cleaner definition in shallower depths and around structure. Because the housing sits close to flush, it is a common choice for boats that run on plane and trailer often, where a larger fairing block would be vulnerable.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face clean of growth and rinse it after saltwater use, especially if the boat sits in the water for extended periods. When cleaning around the transducer, stick with mild detergent and avoid solvent-based cleaners that can damage the transducer’s face and seals.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550402216182,"sku":"APL936085","price":1275.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694095_apl936085_jpeg.jpg?v=1787793524"},{"product_id":"apl876329","title":"Garmin Signal VHF Marine VHF Radio, 3.5 in Touchscreen","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin Signal VHF is a fixed-mount marine VHF radio series with a 3.5-inch color touchscreen, Class D DSC, and built-in AIS options for receive-only or transmit-and-receive operation. It gives the helm a clean control point for voice communication, DSC safety functions, and AIS awareness, with an included fist mic that has its own speaker for clearer audio at the operating position.\u003c\/p\u003e\u003cp\u003eThe radio runs on 9.6 to 32 Vdc, so it fits common 12 V and 24 V DC electrical systems without a separate converter. The head unit carries IEC 60529 IPX6 and IPX7 water ratings, while the fist mic is rated IPX7, making the system suitable for protected cockpits, pilothouses, and exposed helm areas where spray and washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eFor boats already using Garmin electronics, NMEA 2000, Garmin Marine Network, Garmin BlueNet, and built-in Wi-Fi support help tie the radio into the wider onboard system. Depending on the selected AIS configuration, it can either receive nearby AIS targets or transmit and receive AIS data so other AIS-equipped vessels can see your vessel information after proper setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3.5-inch color touchscreen gives quick access to radio, DSC, and AIS functions from a fixed helm position.\u003c\/li\u003e\n\u003cli\u003eBuilt-in AIS options cover receive-only operation or Class B SOTDMA transmit-and-receive operation, depending on the selected version.\u003c\/li\u003e\n\u003cli\u003eClass D DSC supports distress calling and selective calling when the MMSI and radio setup are completed.\u003c\/li\u003e\n\u003cli\u003eAdaptive noise cancellation, auto squelch, and VHF audio playback help keep calls understandable around engine, wind, and wave noise.\u003c\/li\u003e\n\u003cli\u003eRuns on 9.6 to 32 Vdc for use with 12 V and 24 V boat electrical systems.\u003c\/li\u003e\n\u003cli\u003eHead unit is rated IEC 60529 IPX6 and IPX7, and the fist mic is rated IPX7 for marine exposure.\u003c\/li\u003e\n\u003cli\u003eConnects through NMEA 2000, Garmin Marine Network, Garmin BlueNet, and built-in Wi-Fi for compatible Garmin chartplotter integration, setup, and software updates.\u003c\/li\u003e\n\u003cli\u003eSupports a single VHF\/AIS antenna connection through an SO-239 50-ohm connector; the external antenna is not included.\u003c\/li\u003e\n\u003cli\u003eSupports up to five Garmin Signal RM 100 remote stations for control from a flybridge, tower, or second helm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Signal VHF range is offered here in two AIS configurations. Both are fixed-mount marine VHF radios in the same communication family, but the AIS capability changes the way the unit handles vessel target data.\u003c\/p\u003e\u003cp\u003eThe receive-only version displays AIS traffic from nearby equipped vessels. The transmit-and-receive version adds Class B SOTDMA AIS transmit capability, so the system can broadcast vessel name, position, course, and speed after proper installation and programming.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-02951-01: Built-in AIS Receive Only. This configuration suits installations where the helm needs AIS target awareness without broadcasting the vessel’s own AIS data.\u003c\/li\u003e\n\u003cli\u003e010-02951-00: Built-in AIS Transmit and Receive. This configuration adds AIS transmission for vessels that need to be visible to other AIS-equipped traffic while still receiving surrounding targets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSignal VHF head unit\u003c\/li\u003e\n\u003cli\u003eFist mic\u003c\/li\u003e\n\u003cli\u003eSun cover\u003c\/li\u003e\n\u003cli\u003eHead unit power and external audio cable with fuse, 2 m\u003c\/li\u003e\n\u003cli\u003eFist mic power cable with fuse, 2 m\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 drop cable, 2 m\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eMounting template\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe radio needs its own DC power connection and is not powered by the NMEA 2000 network. For VHF and AIS operation, it should be connected to a VHF external antenna that is well matched at the AIS end of the band, with the final antenna location planned around crew movement, deck layout, and the required RF exposure clearance.\u003c\/p\u003e\u003cp\u003eMMSI programming is part of putting DSC and AIS functions into service. Built-in Wi-Fi and the ActiveCaptain app can be used for setup, MMSI programming, and software updates where supported, while NMEA 2000 lets the radio share GPS position, DSC information, and received AIS information with connected marine devices.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis radio family is a practical match for cruising boats, fishing boats, offshore runabouts, and multi-station vessels that need VHF communication and AIS information in one fixed installation. The remote-station support is especially useful where radio control is needed away from the main helm, such as a flybridge, tuna tower, or secondary steering station.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Receive Only","offer_id":51550402281718,"sku":"APL876329-V1","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Transmit and Receive","offer_id":51550402314486,"sku":"APL876329-V2","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1337602_apl876329.webp?v=1787793524"},{"product_id":"apl701568","title":"Garmin GPSMAP 12x3 Trim Piece Snap Cover, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12990-02 is a trim piece snap cover for GPSMAP 12x3 series chartplotters, including GPSMAP 1223, 1223xsv, 1243, and 1243xsv.\u003c\/p\u003e\u003cp\u003eIt is a small black trim cover that snaps onto the front trim area of the display to replace a missing or cracked piece and bring the bezel back to a clean, finished look. It does not cover the screen like a sun cover; it is a cosmetic trim part that helps your install look complete.\u003c\/p\u003e\u003cp\u003eThis is the kind of part that often goes missing when a unit gets pulled for service work or a dash refit, so it is a practical replacement to have on hand if your helm sees frequent upgrades.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits GPSMAP 12x3 series chartplotters (GPSMAP 1223, 1223xsv, 1243, 1243xsv)\u003c\/li\u003e\n\u003cli\u003eSnap-mount trim cover for quick replacement when a trim piece is lost or damaged\u003c\/li\u003e\n\u003cli\u003eBlack finish that matches common GPSMAP 12x3 trim styling\u003c\/li\u003e\n\u003cli\u003eNo wiring, software, or network impact since it is purely a physical trim component\u003c\/li\u003e\n\u003cli\u003eHelpful for keeping the helm looking tidy after trailering, storage, or service removal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis trim piece is specific to the GPSMAP 12x3 family. Confirm the exact model number on your unit label before ordering, since other GPSMAP sizes and generations use different bezel and trim geometry.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePower the display off, then wipe the trim area so sand and salt do not get trapped under the cover. Align the cover with the trim opening and press evenly until it clicks into place. If you ever need to remove it, work gently to avoid marking the bezel or the surrounding dash surface.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water after heavy salt spray and wipe with a soft cloth. Skip harsh solvents and abrasive pads, which can dull the finish on small exterior trim parts.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis replacement trim cover is a good match for boats where electronics get handled often, such as fishing boats that are regularly covered at the dock, or cruisers that are trailered and strapped down. It is also useful after a dash cutout change or electronics swap when you want the front of the display to look complete again.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550402609398,"sku":"APL701568","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697288_apl004357_jpeg.jpg?v=1787793543"},{"product_id":"apl052444","title":"Garmin APK 10 Autopilot Keypad, For Reactor 40, NMEA 2000, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin APK 10 Autopilot Keypad is a helm-mounted control keypad that lets you run compatible Garmin autopilot systems from a dedicated knob and buttons, without having to reach for the chartplotter every time you want to engage, standby, or nudge your heading.\u003c\/p\u003e\u003cp\u003eIt connects to the boat over NMEA 2000, and it is powered by the NMEA 2000 network (no separate power lead for the keypad). Electrical specs are 9 to 32 Vdc input, with typical draw around 2 W on the network. The housing is rated IPX7 for incidental water exposure, which fits open-helm and washdown-prone installs.\u003c\/p\u003e\u003cp\u003eMounting is either flush or surface, and the two orientations give you a layout that matches your dash space. Flush depth is about 7 mm, and surface depth is about 16.4 mm, so it stays low on the console while still being easy to grab when the boat is moving.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 connection for data and power, so the keypad runs off the network with a single drop cable connection\u003c\/li\u003e\n\u003cli\u003e9 to 32 Vdc input (from the network) with typical NMEA 2000 power draw around 2 W (2.5 W max)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 LEN 6 for network load planning on smaller backbones\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for helms that see spray and routine washdowns\u003c\/li\u003e\n\u003cli\u003eRotary knob with an LED ring that gives you quick feedback on autopilot status while you make heading changes\u003c\/li\u003e\n\u003cli\u003eEngage and standby buttons for quick autopilot control when docking, trolling, or running a tight channel\u003c\/li\u003e\n\u003cli\u003eFlush or surface mounting using the included template, gaskets, and trim caps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis keypad is offered in two orientations to match different dash layouts.\u003c\/p\u003e\u003cp\u003eOrientation changes the overall footprint and cutout shape, while the network connection, power requirements, and mounting styles remain the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-03197-00: Horizontal orientation. This layout spreads the controls across a wider, shorter face, which can suit helms with more horizontal panel space.\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003e010-03197-01: Vertical orientation. This layout stacks the controls in a taller, narrower face, which can fit better in tight columns or between other instruments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAPK 10 autopilot keypad (orientation depends on the selected variant)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 backbone\/drop cable (2 m) and T-connector\u003c\/li\u003e\n\u003cli\u003eMounting hardware for flush and surface installation\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so you can route the NMEA 2000 drop cable cleanly and keep the keypad where it can be reached with one hand. For surface mounting, the cable passthrough calls for a 20 mm hole. For flush mounting, the template is used to mark the cutout, with corner holes started using an 11.2 mm drill bit before cutting the opening.\u003c\/p\u003e\u003cp\u003eTwo lengths of mounting screws are typically provided for the different mounting styles, and trim caps finish the installation after the keypad is secured and connected.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe keypad needs to be on the same NMEA 2000 network as the rest of the autopilot components so it can communicate with the system. The NMEA 2000 network supplies power to the keypad, so a separate power connection is not required at the keypad itself.\u003c\/p\u003e\u003cp\u003eOn boats where you are adding or rebuilding the network, make sure the NMEA 2000 power feed is switched through the ignition or an in-line switch. Leaving the network powered continuously can drain batteries over time.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis keypad is intended for Garmin autopilot control setups and is commonly paired with Reactor 40 systems. A compatible Garmin helm control or chartplotter is required in the overall autopilot system.\u003c\/p\u003e\u003cp\u003eChoose the orientation based on your dash layout and the cutout you are willing to make. Flush mounting keeps the profile close to the panel, while surface mounting avoids a large cutout and relies mainly on the cable passthrough hole.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of keypad makes sense for boats where the helmsman wants autopilot control within arm’s reach, such as offshore runs, long channel transits, trolling patterns, or sailing passages where frequent heading tweaks are common.\u003c\/p\u003e\u003cp\u003eIt is a good match for helms that already have a NMEA 2000 backbone in place and need a dedicated autopilot control point that is easy to use in motion and in wet conditions.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Horizontal","offer_id":51550403231990,"sku":"APL052444-V1","price":399.99,"currency_code":"USD","in_stock":true},{"title":"Vertical","offer_id":51550403264758,"sku":"APL052444-V2","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1282763_apl052444.webp?v=1787793580"},{"product_id":"apl959536","title":"Garmin GMR Radar Power Cable, 48 ft, Threaded Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12067-00 is a 48 ft (14.6 m) threaded power cable for compatible Garmin GMR radar domes and open-array pedestals.\u003c\/p\u003e\u003cp\u003eIt replaces a damaged lead or supports a fresh install when your radar is mounted on a hardtop, radar arch, or mast and you need a longer run back to the DC distribution panel. The threaded connector tightens down at the radar so the connection stays in place through vibration and spray.\u003c\/p\u003e\u003cp\u003eThis is a power lead only. It does not replace the radar network or Ethernet cable used for data between the radar and your chartplotter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e48 ft (14.6 m) length for routing from radar mounting points to the boat's DC distribution without splicing in many installs\u003c\/li\u003e\n\u003cli\u003eThreaded radar-end connector that locks in place and helps prevent accidental loosening\u003c\/li\u003e\n\u003cli\u003eBuilt as a dedicated radar power cable, keeping power wiring separate from data cabling\u003c\/li\u003e\n\u003cli\u003eCompatible with GMR 8 xHD, GMR 18 and 18 HD, GMR 24, 24 HD and 24 xHD, plus GMR 1204\/1206 and 404\/406\/604\/606 xHD open-array pedestals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector style at the radar end before ordering. This cable uses a threaded radar connection and is not the same as other Garmin radar power leads that may be a similar length.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing cable, verifying the part number on the old lead is the quickest way to confirm fit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan a route that keeps the cable protected from chafe and heat, and support it so it cannot move and rub in a seaway. Leave a drip loop at deck entries and use proper glands where the cable passes through a hardtop or deck.\u003c\/p\u003e\u003cp\u003eTerminate the DC end to a dedicated breaker or fuse sized for your specific radar model, and follow the radar install guide for wire termination and grounding practices on board.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boats with a radar on a hardtop, arch, or mast where the power run needs to reach a main panel below deck. It is also handy for refits when an older cable has been cut short or compromised.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550404215030,"sku":"APL959536","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697259_apl959536_jpeg.jpg?v=1787793619"},{"product_id":"apl167551","title":"Garmin CCU\/ECU Interconnect Cable, For GHP 10\/GHP 10V, 5 m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11055-00 is a 16 ft (5 m) CCU to ECU interconnect cable used in Garmin GHP 10 autopilot installations. It links the Course Computer Unit (CCU) to the Electronic Control Unit (ECU) and gives you enough length to route cleanly through rigging tubes, under decks, or behind a helm without putting the system components in the same compartment.\u003c\/p\u003e\u003cp\u003eThis harness also includes a color-coded, bare-wire section used for the typical on-board connections that tie into the autopilot system during install, such as tachometer signal, Shadow Drive, and the alarm buzzer wiring. It is the right fit when you are replacing a damaged interconnect, correcting an install that was pulled tight, or re-routing to a better mounting location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e16 ft (5 m) overall length for CCU to ECU placement flexibility on a boat\u003c\/li\u003e\n\u003cli\u003eConnector-terminated interconnect for the CCU to ECU link in a GHP 10 autopilot system\u003c\/li\u003e\n\u003cli\u003eColor-coded bare-wire leads for wiring into supporting functions like tachometer input, Shadow Drive, and alarm buzzer connections\u003c\/li\u003e\n\u003cli\u003eCommonly used with Garmin GHP 10 and GHP 10V autopilot systems that use separate CCU and ECU modules\u003c\/li\u003e\n\u003cli\u003eUseful for clean refits when the original routing is too short, chafed, or no longer reaches after equipment relocation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for Garmin autopilot installations that use a separate CCU and ECU, such as the GHP 10 family. It is not a transducer cable and it does not replace NMEA 2000 drop cables or network backbone wiring. Match it to the interconnect used between your CCU and ECU and confirm you have the correct style for your specific autopilot generation before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the route from the ECU location near the pump or steering gear to the CCU mounting area, then confirm you can stay within the 5 m run without stretching the harness. Support the cable along its path so it is not hanging by the connectors, and keep it away from sharp edges and moving steering components. The bare-wire section is where you make the helm and accessory splices, so leave enough access to work cleanly and seal connections properly for the marine environment.\u003c\/p\u003e\u003ch6\u003eWho it suits on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners and installers doing a tidy GHP 10 refit where the ECU is mounted low and aft and the CCU needs to live in a drier, more protected space. It also fits boats that see vibration and constant access panels, where replacing a tired interconnect cable prevents intermittent heading and steering issues caused by strained wiring.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550406213878,"sku":"APL167551","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834562_apl167551.webp?v=1787793666"},{"product_id":"apl000787","title":"Garmin ECHOMAP Ultra 2 Trim Piece Snap Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin Trim Piece Snap Cover is a snap-on cover with trim for compatible ECHOMAP Ultra and ECHOMAP Ultra 2 chartplotters in 10\", 12\", and 16\" sizes. It clips over the front to tidy up the edge around the display and helps prevent scuffs and scratches when the boat is at the dock, on a trailer, or being worked on at the helm.\u003c\/p\u003e\u003cp\u003eThis is a fit-specific accessory, so matching the cover size to your chartplotter size is the key step. Common matches include ECHOMAP Ultra 102sv and ECHOMAP Ultra 2 102sv (10\"), ECHOMAP Ultra 122sv and ECHOMAP Ultra 2 122sv (12\"), and ECHOMAP Ultra 2 162sv (16\").\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSnap-on cover with trim that finishes the edge around the chartplotter and helps keep the face from getting marked during normal onboard use\u003c\/li\u003e\n\u003cli\u003eOffered in size-specific versions for 10\", 12\", and 16\" ECHOMAP Ultra family chartplotters\u003c\/li\u003e\n\u003cli\u003eHandy for trailering, storage, and busy cockpits where gear and lines can rub against the electronics\u003c\/li\u003e\n\u003cli\u003eNo wiring, network setup, or power considerations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple size configurations to match different ECHOMAP Ultra display sizes.\u003c\/p\u003e\u003cp\u003eThe size is what changes between versions, and each one is intended to clip onto the corresponding chartplotter for a proper fit at the helm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-12841-02: Size 10\". Common matches include ECHOMAP Ultra 102sv and ECHOMAP Ultra 2 102sv chartplotters.\u003c\/li\u003e\n\u003cli\u003e010-12842-02: Size 12\". Common matches include ECHOMAP Ultra 122sv and ECHOMAP Ultra 2 122sv chartplotters.\u003c\/li\u003e\n\u003cli\u003e010-13352-11: Size 16\". Common matches include ECHOMAP Ultra 2 162sv chartplotters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm your chartplotter display size and model family before ordering, since a 10\" cover will not seat correctly on a 12\" unit, and vice versa. If your unit is installed in a tight dash cutout or inside a protective helm pod, make sure there is enough clearance in front of the screen for the cover to clip on and off without forcing it.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eThe cover is meant to be pressed into place and removed by hand. Put it on after the day is done to keep the screen area from getting rubbed by bags, tackle, cleaning tools, or dock lines, and remove it before operating the chartplotter.\u003c\/p\u003e\u003cp\u003eThis accessory is a good match for boats that see frequent trailering, have an open helm, or run in conditions where vibration and onboard gear movement can lead to cosmetic wear around electronics.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water after salt exposure and wipe with a soft cloth. Avoid harsh solvents and abrasive pads that can dull the surface over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12\"","offer_id":51550407852278,"sku":"APL000787-V2","price":19.99,"currency_code":"USD","in_stock":false},{"title":"10\"","offer_id":51550407885046,"sku":"APL000787-V1","price":19.99,"currency_code":"USD","in_stock":false},{"title":"16\"","offer_id":51550407917814,"sku":"APL000787-V3","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1279810_apl000787.webp?v=1787793764"},{"product_id":"apl910390","title":"Garmin ECHOMAP UHD2 54CV Chartplotter\/Fishfinder Combo, Garmin Navionics+ U.S. Coastal \u0026 Great Lakes, 5 in Keyed Display, Without Transducer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02591-50 is a 5-inch ECHOMAP UHD2 54cv chartplotter\/fishfinder combo with built-in Garmin Navionics+ mapping for U.S. Coastal and Great Lakes waters.\u003c\/p\u003e\u003cp\u003eIt runs on 9-18 V DC (a standard 12 V system) and uses a keyed control pad that works well when hands are wet or the boat is moving. The 800 x 480 display keeps charts and sonar returns easy to read at the helm.\u003c\/p\u003e\u003cp\u003eSonar is supported for Garmin traditional CHIRP and ClearVü scanning, but this version does not include a transducer. Add a compatible 4-pin Garmin transducer to the rear port to get depth and fishfinder data on screen.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5-inch keyed display with 800 x 480 resolution\u003c\/li\u003e\n\u003cli\u003eBuilt-in Garmin Navionics+ mapping for U.S. Coastal and Great Lakes coverage\u003c\/li\u003e\n\u003cli\u003eSupports Garmin traditional CHIRP and ClearVü scanning sonar with a compatible transducer (not included)\u003c\/li\u003e\n\u003cli\u003e9-18 V DC power input for typical 12 V boat systems\u003c\/li\u003e\n\u003cli\u003eBuilt-in Wi-Fi for sharing waypoints, routes, and sonar data with compatible ECHOMAP UHD2 units\u003c\/li\u003e\n\u003cli\u003eWorks with the ActiveCaptain app for OneChart, software updates, and Quickdraw Community access\u003c\/li\u003e\n\u003cli\u003eMulti-band GPS for steadier position fixes around marinas, bridges, and steep shorelines\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating for rain, spray, and routine washdowns\u003c\/li\u003e\n\u003cli\u003emicroSD card slot supports up to 32 GB for charts and data storage\u003c\/li\u003e\n\u003cli\u003eTilt-mount and flush-mount options for small console and dash installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit measures 7.4 inches wide by 4.8 inches high by 2.4 inches deep, so it fits well on smaller helms where space is tight. Use the included tilt mount when you want quick access to the rear connections, or flush-mount it for a cleaner dash face.\u003c\/p\u003e\u003cp\u003ePower connects through the included power\/data cable. Run it to a clean 12 V feed (within the 9-18 V range) and route transducer wiring away from high-current conductors to help keep sonar readings clean.\u003c\/p\u003e\u003ch6\u003eSonar and transducer compatibility\u003c\/h6\u003e\u003cp\u003eThis part number ships without a transducer, and a transducer is required to display depth and targets. It has a single 4-pin transducer port and supports Garmin traditional CHIRP and ClearVü scanning sonar when paired with a compatible 4-pin Garmin transducer.\u003c\/p\u003e\u003ch6\u003eNetworking and app integration\u003c\/h6\u003e\u003cp\u003eBuilt-in Wi-Fi lets you connect to compatible ECHOMAP UHD2 chartplotters on the same boat to share user data such as waypoints and routes, and it can share sonar when configured on supported units. Pairing to a phone or tablet through the ActiveCaptain app is a practical way to handle software updates, manage charts, and pull in community Quickdraw contours.\u003c\/p\u003e\u003cp\u003eThis model is not NMEA 2000 compatible, so it is best used as a stand-alone navigation and sonar display rather than as a backbone-connected system display for engine and sensor data.\u003c\/p\u003e\u003ch6\u003eOn-board use cases\u003c\/h6\u003e\u003cp\u003eA 5-inch display makes sense on skiffs, bay boats, small center consoles, and sailboats where you want charts and sonar in a compact footprint. It also works well as a second station display when you want quick coastal navigation and depth without giving up prime dash space.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eECHOMAP UHD2 54cv display\u003c\/li\u003e\n\u003cli\u003ePower\/data cable\u003c\/li\u003e\n\u003cli\u003eTilt mount\u003c\/li\u003e\n\u003cli\u003eFlush mount\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550409490678,"sku":"APL910390","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280254_apl910390.webp?v=1787793850"},{"product_id":"apl207172","title":"Garmin microSD Card Door, For echoMAP CHIRP 7Xdv\/7Xsv","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12445-21 is a replacement microSD card door made to close and protect the memory card slot on echoMAP CHIRP 7Xdv and 7Xsv units. It is the door only, not a memory card.\u003c\/p\u003e\u003cp\u003eIf the original door is missing, cracked, or no longer stays shut, the card slot is left exposed during washdowns and rough runs. Replacing the door helps keep your chart or update card seated and reduces the chances of moisture or grit getting into the slot area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits echoMAP CHIRP 7Xdv and echoMAP CHIRP 7Xsv units\u003c\/li\u003e\n\u003cli\u003eCovers the microSD opening so the card stays held in place during vibration and pounding\u003c\/li\u003e\n\u003cli\u003eHelps keep spray and debris away from the card contacts when the door is closed\u003c\/li\u003e\n\u003cli\u003eRestores quick access for chart cards, software updates, and data transfer without leaving the slot exposed\u003c\/li\u003e\n\u003cli\u003eReplacement door that matches the original fit on the unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis door is specific to echoMAP CHIRP 7Xdv and echoMAP CHIRP 7Xsv models. If your unit is a different echoMAP generation or screen size, the door style and attachment points can be different, so match the model name on the unit before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplacement is a straightforward swap of the existing door on the unit. Work in a dry spot at the dock, keep the card slot area clean, and avoid forcing the door into place if something does not line up. Once installed, close the door fully before powering up and heading out.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, a light rinse around the unit and a wipe-down helps keep salt crystals from building up near the door edges. Any time you open the door to change cards, keep spray off the opening and make sure the door closes flush again before the next run.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boaters who regularly swap chart cards or run software updates and want the microSD access point properly covered again. It also makes sense for open helms and center consoles where the electronics see more sun, spray, and washdowns.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550411751670,"sku":"APL207172","price":4.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696413_apl207172_jpeg.jpg?v=1787794021"},{"product_id":"apl418415","title":"Garmin Navionics+ Marine Chart, Java \u0026 Borneo, microSD\/SD, 1-Year Daily Updates","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-C1221-20 is a Navionics+ electronic chart card for the NSAE023R Java \u0026amp; Borneo coverage area, supplied on a microSD\/SD card for compatible Garmin chartplotters. Coverage focuses on the central Indonesian islands and nearby waters, including Java, Borneo, Sulawesi, islands west of Timor, Brunei, and key ports such as Singapore, Jakarta, and Davao City.\u003c\/p\u003e\u003cp\u003eA one-year subscription is included for daily chart updates and downloadable chart content through the ActiveCaptain app. The chart data you download during the subscription period stays on the card, but new downloads stop when the subscription ends unless it is renewed.\u003c\/p\u003e\u003cp\u003eBuilt-in Auto Guidance+ and depth range shading are available when supported by your chartplotter and enabled in your settings. Auto Guidance+ is intended for planning and does not replace safe navigation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCoverage region code NSAE023R: Java \u0026amp; Borneo, with coastal coverage across central Indonesia plus portions of Malaysia and the Philippines\u003c\/li\u003e\n\u003cli\u003emicroSD\/SD card format for chartplotters with a compatible card slot\u003c\/li\u003e\n\u003cli\u003eOne-year subscription included for daily chart updates through the ActiveCaptain app (activation required)\u003c\/li\u003e\n\u003cli\u003eDepth range shading supports up to 10 color-shaded ranges for quick target-depth viewing when the feature is available\u003c\/li\u003e\n\u003cli\u003eShallow water shading and detailed contours (up to 1 ft where chart data supports it) help with route planning and fishing setup\u003c\/li\u003e\n\u003cli\u003eAuto Guidance+ can calculate a suggested dock-to-dock path using your chosen depth and overhead clearance settings when supported by your chartplotter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003emicroSD\/SD card with preloaded Garmin Navionics+ charts for NSAE023R (Java \u0026amp; Borneo)\u003c\/li\u003e\n\u003cli\u003eOne-year chart subscription for daily updates and downloadable content (activation required)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis chart card is meant for Garmin chartplotters that support the Garmin Navionics+ format and have a microSD\/SD card slot. Feature availability can vary by display, so it helps to confirm your specific chartplotter supports the functions you plan to use, such as Auto Guidance+ and depth shading.\u003c\/p\u003e\u003ch6\u003eInstallation and updates\u003c\/h6\u003e\u003cp\u003eInsert the card in the chartplotter card slot and allow the unit to index the new chart data. To start receiving updates, activate the included subscription and manage downloads through the ActiveCaptain app; updates are then synced to the chartplotter. Keeping your chartplotter software current helps the chart layers and features behave as expected.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis card makes sense for cruisers, charter operators, and anglers running a Garmin chartplotter in the Java and Borneo region who want local chart detail plus ongoing corrections through daily updates. It also fits owners who plan routes ahead of time and like using depth-range shading to quickly highlight target water for fishing and safe passages.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550414471414,"sku":"APL418415","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696038_apl418415_jpeg.jpg?v=1787794143"},{"product_id":"apl304335","title":"Garmin Class A Linear Drive Unit, For GHP 12, 28,500 lb Max Displacement, 10-30V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11572-00 is a Class A linear drive unit for sailboat autopilot steering systems on vessels up to 28,500 lb (12,927 kg) of displacement. It extends and retracts to move the rudder through a quadrant or a dedicated tiller arm, with a 12 in (303 mm) maximum stroke.\u003c\/p\u003e\u003cp\u003eOn a typical installation, physical end stops on the steering system must limit travel so the drive is not acting as the stop, and the unit needs to be mounted in a location that stays dry and protected from immersion, drips, and hose spray. Plan space around the actuator movement and linkage, and allow for cable routing without cutting the attached cables.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRated for sailboats up to 28,500 lb (12,927 kg) displacement\u003c\/li\u003e\n\u003cli\u003eSelf-contained linear actuator that drives the rudder by extending and retracting\u003c\/li\u003e\n\u003cli\u003e12 in (303 mm) maximum stroke; end stops should limit travel to 11.57 in (294 mm) to avoid over-travel\u003c\/li\u003e\n\u003cli\u003eRuns on 10 to 30 VDC for use on 12V and 24V electrical systems\u003c\/li\u003e\n\u003cli\u003eAverage motor draw of 1 to 2 A; average clutch current of 0.5 A at 12V for power budgeting\u003c\/li\u003e\n\u003cli\u003eRequires a dry mounting location out of immersion, dripping water, and hose spray\u003c\/li\u003e\n\u003cli\u003eMounting reference dimensions: 25.71 in (653 mm) base-to-tiller pin retracted, 31.5 in (800 mm) amidships, 37.28 in (947 mm) extended\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis drive is intended to steer a rudder through a quadrant or a tiller arm sized for your boat’s rudder post. The linkage point geometry matters for proper rudder travel and for keeping the actuator within its safe working range, so measure the available space and confirm clear movement through full port and starboard.\u003c\/p\u003e\u003cp\u003eFor planning the install envelope, the centered body size is approximately 32.3 in x 6.5 in x 6.1 in (820 x 165 x 155 mm). Operating temperature range is -15°C to 60°C (5°F to 140°F).\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDrive placement should keep the motor and linkage free of contact with the hull structure, quadrant, and any adjacent systems throughout the entire stroke. Mounting with the motor oriented sideways helps reduce unnecessary friction compared with mounting straight up or down.\u003c\/p\u003e\u003cp\u003eThe drive unit must be protected from water exposure. Treat it like equipment meant for an inside steering compartment rather than a bilge, lazarette floor, or any area that sees washdown spray.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower is designed around 10 to 30 VDC, which fits common 12V and 24V onboard electrical systems. Use the current draw figures when sizing wiring and protection, and route the factory-attached cables so they are supported and protected from chafe near steering gear and moving linkage.\u003c\/p\u003e\u003cp\u003eThis unit is used as part of a Garmin autopilot installation for sailboats and connects to the appropriate autopilot components per the system’s installation guidance.\u003c\/p\u003e\u003ch6\u003eMaintenance and inspection\u003c\/h6\u003e\u003cp\u003ePlan for a quick annual check of all bolted connections and linkage hardware, tightening as needed after a season of vibration and steering loads. Inspect the drag-link fastening and confirm the end stops are still doing the work of limiting travel rather than the drive unit.\u003c\/p\u003e\u003cp\u003eThis is a good match for larger cruising sailboats that use a quadrant or tiller-arm linkage and have a protected steering compartment where the drive can stay dry. It also fits boats running either 12V or 24V electrical systems, as long as supply voltage stays within 10 to 30 VDC.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550416961782,"sku":"APL304335","price":2149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694148_apl304335_jpeg.jpg?v=1787794271"},{"product_id":"apl238675","title":"Garmin Force Round Nose Cone with Transducer Replacement Kit, For Force and Force Kraken Trolling Motors","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 020-00301-00 is a round nose cone with a transducer replacement kit for compatible Force-family trolling motors, in a black finish.\u003c\/p\u003e\u003cp\u003eIt gives you the standard nose cone shape that works with traditional clamp-on, third-party accessories and includes the parts used when removing, replacing, or upgrading the built-in Garmin transducer.\u003c\/p\u003e\u003cp\u003eReplacement O-rings and compression seals are part of the kit so the trolling motor can be reassembled with proper waterproof sealing after service work.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStandard round nose cone profile that accepts third-party equipment that uses traditional clamps\u003c\/li\u003e\n\u003cli\u003eTransducer replacement components for service work on the built-in Garmin transducer (remove, replace, or upgrade)\u003c\/li\u003e\n\u003cli\u003eIncludes replacement O-rings and compression seals for resealing after disassembly\u003c\/li\u003e\n\u003cli\u003eCompatible with Garmin Force and Force Kraken trolling motors\u003c\/li\u003e\n\u003cli\u003eBlack finish to match common trolling motor setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for Garmin Force and Force Kraken trolling motors. Match your motor model before ordering, especially if your boat has more than one trolling motor generation on board.\u003c\/p\u003e\u003cp\u003eIf you are clamping a third-party transducer or other accessory at the bow, the round nose cone shape keeps the front end tidy and provides a familiar surface for standard clamp styles.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it during a nose cone or transducer service. Keep the sealing surfaces clean, seat the O-rings and compression seals evenly, and make sure no wiring is pinched before tightening everything back up.\u003c\/p\u003e\u003cp\u003eAfter installation, a quick check at the dock for any seepage around the nose cone area is a good habit before a long run or a full day on the water.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the lower unit after use, especially in brackish or saltwater, and avoid aiming a pressure washer directly at seams. If the motor takes a strike on a stump or trailer bunks, inspect the nose cone area and reseal if anything has been opened up.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550418731254,"sku":"APL238675","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0713869_apl238675.jpg?v=1787794388"},{"product_id":"apl892735","title":"Garmin GTM 60 HD Traffic Receiver Cable, For nüvi 2400\/3400 Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01031-00 is a GTM 60 HD Digital Traffic Receiver and vehicle power cable that adds Digital 3D Traffic to compatible Garmin nüvi navigators while powering the unit from a 12-volt accessory socket.\u003c\/p\u003e\u003cp\u003eIt uses Garmin 3D Traffic and Digital Traffic delivered through the HD Radio broadcasting system to provide traffic alerts in North America, with updates that can arrive up to 10 times faster than traditional traffic receivers. Traffic alerts are subscription-free and ad-free for the useful life of the Garmin product, and traffic content is not available in all areas.\u003c\/p\u003e\u003cp\u003eThis is an on-road accessory rather than a marine navigation input, but it is useful for boaters who trailer or travel by vehicle to the marina and want traffic-aware routing on the way to the ramp, yard, or service shop.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombination traffic receiver and 12-volt power adapter for compatible Garmin automotive navigators\u003c\/li\u003e\n\u003cli\u003eDigital 3D Traffic using Garmin 3D Traffic and Digital Traffic delivered through the HD Radio broadcasting system\u003c\/li\u003e\n\u003cli\u003eTraffic alerts for North America, with update speed listed as up to 10 times faster than traditional traffic receivers\u003c\/li\u003e\n\u003cli\u003eSubscription-free, advertising-free lifetime traffic alerts for the useful life of the Garmin product\u003c\/li\u003e\n\u003cli\u003eTraffic subscription activates automatically after the GPS device has satellite lock while receiving traffic signals\u003c\/li\u003e\n\u003cli\u003eInitial traffic acquisition can take up to five minutes after connection to power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis traffic receiver and power cable is intended for select Garmin nüvi models that support the GTM 60, including units in the nüvi 2400 and 3400 series. Common compatible examples include nüvi 2455LT, 2455LMT, 2475LT, 2495LMT, 2555LT, 2555LMT, 2595LMT, 3450, 3450LM, and 3490LMT. If your navigator has traffic built into the device, it may not use a GTM cable, so match accessories to your exact model before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplace the standard vehicle power cable on your navigator with the GTM 60 cable, then plug the adapter into a 12-volt accessory socket. After the GPS unit has satellite reception and the cable is receiving traffic signals, traffic data begins to populate and the subscription activates automatically.\u003c\/p\u003e\u003cp\u003eFor the first start-up in a new area, allow up to five minutes for traffic acquisition. For best reception, keep the cable routed away from heavy metal obstructions and avoid coiling excess length tightly around other power wiring.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners who rely on a compatible Garmin nüvi in a tow vehicle, RV, or runabout car for trips to launches and marinas where traffic delays can throw off tides, reservations, or service appointments. It is also useful for crews who shuttle between the dock and home base and want live traffic awareness during the drive.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the connectors clean and dry, and avoid placing the cable where it will sit in standing water or take direct spray. If it is used around a marine environment, wipe down the plug ends after humid or salty exposure and route the cable so it does not chafe on sharp edges or pinch points.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550427939062,"sku":"APL892735","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694188_apl892735_jpeg.jpg?v=1787794473"},{"product_id":"apl841691","title":"Garmin BlueNet Network Device Stacking Mount, For BlueNet 20 Switch and BlueNet 30 Gateway","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13142-00 is a stacking mount that lets you install compatible Garmin BlueNet network devices as a single, space-saving stack. It is intended for use with the Garmin BlueNet 20 switch and the Garmin BlueNet 30 gateway when you want both units together in one serviceable spot.\u003c\/p\u003e\u003cp\u003eOn most boats, network hardware ends up behind the helm, inside an electronics cabinet, or on a bulkhead where access is tight. Stacking the devices helps keep the footprint small while keeping ports and indicator lights easier to reach during commissioning, troubleshooting, and seasonal checks.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for stacking a Garmin BlueNet 20 switch with a Garmin BlueNet 30 gateway\u003c\/li\u003e\n\u003cli\u003eReduces the mounting footprint compared with installing the units separately\u003c\/li\u003e\n\u003cli\u003eKeeps the two devices aligned as one assembly for a cleaner network equipment layout\u003c\/li\u003e\n\u003cli\u003eHelps keep access clear for cable routing, service checks, and device labeling\u003c\/li\u003e\n\u003cli\u003eUseful for helm consoles, electronics lockers, and other tight mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is for the Garmin BlueNet 20 switch and Garmin BlueNet 30 gateway. If your network gear is a different model, check the device family and mounting pattern before ordering, since stacking mounts are typically model-specific.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so you can still plug and unplug network cables without forcing tight bends, and so you can see the device status indicators when the panel is open. A dry, ventilated location behind the dash or in an electronics cabinet is common, with enough clearance around the stack to dress cables neatly.\u003c\/p\u003e\u003cp\u003eAfter mounting, tidy the cable runs and leave a little service loop so the stack can be accessed for maintenance without straining connectors.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats building out a Garmin BlueNet backbone where a BlueNet 20 and BlueNet 30 need to live together, especially on center consoles and sportfishing boats where electronics space disappears quickly.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAs part of normal onboard checks, confirm the stack is still secure and that cables are supported so connectors are not carrying weight. Wipe down dust and salt film as needed, and avoid spraying water directly onto network equipment when cleaning nearby spaces.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550439506166,"sku":"APL841691","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715525_apl841691.jpg?v=1787794683"},{"product_id":"apl917218","title":"Garmin Shadow Drive Sensor, For GHP 10\/12\/20 Autopilots, Auto-Disengage on Helm Turn, 1\/4 in Female NPT","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11054-00 is a Shadow Drive sensor that disengages a compatible Garmin hydraulic autopilot as soon as you manually turn the helm. It plumbs into the hydraulic steering line and uses 1\/4 in. female NPT ports, so it can be integrated into many common steering circuits with the correct thread adapters.\u003c\/p\u003e\u003cp\u003eOn the water, it’s a straightforward safety and control add-on: with the autopilot engaged, you can take the wheel without hunting for a standby button. Once you stop steering and settle on a steady heading again, the autopilot can reengage.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual override behavior: turning the helm disengages the autopilot so you can steer immediately\u003c\/li\u003e\n\u003cli\u003eInstalls inline in hydraulic steering lines where helm movement is sensed through the steering circuit\u003c\/li\u003e\n\u003cli\u003e1\/4 in. female NPT ports for plumbing into the hydraulic system\u003c\/li\u003e\n\u003cli\u003eSupports Garmin autopilot systems that use the Shadow Drive sensor, including GHP 10, GHP 12, and GHP 20 hydraulic autopilots\u003c\/li\u003e\n\u003cli\u003eReengages when a steady, straight course is re-established\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis sensor is intended for boats with hydraulic steering and a compatible Garmin autopilot setup that supports Shadow Drive. Confirm your autopilot model family and that your steering circuit can accept an inline sensor connection.\u003c\/p\u003e\u003cp\u003eBecause hydraulic systems vary by helm, hose, and fitting standards, check the thread type at the install point. The sensor body uses 1\/4 in. female NPT, so boats using ORB, metric, or compression-style connections typically need the appropriate adapters selected for the exact steering hardware on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the install location so the unit can be mounted securely and so the hydraulic lines can be routed without chafe, tight bends, or vibration points. Any time the steering circuit is opened, treat the job like hydraulic service: keep everything clean, torque fittings correctly, and bleed the steering system fully to remove air.\u003c\/p\u003e\u003cp\u003eAfter installation, verify operation at the dock: engage the autopilot, apply a deliberate helm input, confirm the autopilot disengages as expected, then confirm normal autopilot operation returns when you stop steering and re-establish a steady heading.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that run long transits under autopilot and still want instant hands-on control during traffic situations, docking approaches, or unexpected course changes. It also fits crews who alternate between helmsman steering and autopilot steering and want the transition to feel natural at the wheel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the hydraulic fittings and nearby hose runs for seepage, salt buildup, and chafe. If you service the steering system later, recheck for air in the lines and confirm the Shadow Drive disengage behavior during your post-service sea trial.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550442848502,"sku":"APL917218","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694187_apl917218_jpeg.jpg?v=1787794868"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/1fef9d1b-4490-4631-80a8-2d430bcb67a0.webp?v=1787791266","url":"https:\/\/www.apollolighting.com\/collections\/brand-garmin.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}