{"title":"TACO Marine","description":"","products":[{"product_id":"apl549457","title":"TACO Marine Rod Holder Liner with Lip Protection, For F31-2200, F31-2230, F31-2240, Anti-Fungal PVC","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine 2200 series Rod Holder Liner is a replacement liner with lip protection for TACO F31-22 Series flared aluminum rod holders. It fits the F31-2200, F31-2230, and F31-2240 rod holders, which are sold separately, and helps protect reels from contact damage while also shielding powder-coated holder edges from chips.\u003c\/p\u003e\u003cp\u003eMade from anti-fungal PVC, this liner is shaped for flared-style aluminum rod holders and measures 8-5\/8\" long with a 2-1\/2\" outside diameter and 1.63\" inside diameter. It is a small but useful service part for fishing boats, towers, leaning posts, and rod storage locations where rods are moved in and out often during a day on the water.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO F31-2200, F31-2230, and F31-2240 flared aluminum rod holders.\u003c\/li\u003e\n\u003cli\u003eMade from anti-fungal PVC for use in wet marine rod holder locations.\u003c\/li\u003e\n\u003cli\u003eLip protection helps reduce chipping on powder-coated rod holder edges.\u003c\/li\u003e\n\u003cli\u003eHelps protect reels from damage where gear contacts the top of the holder.\u003c\/li\u003e\n\u003cli\u003eMeasures 8-5\/8\" long with a 2-1\/2\" outside diameter and 1.63\" inside diameter.\u003c\/li\u003e\n\u003cli\u003eOffered in white or black to match the look of the rod holder and surrounding hardware.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rod holder liner is offered in two color configurations for the same F31-22 Series application.\u003c\/p\u003e\u003cp\u003eThe color is the visible difference between the variants. The length, outside diameter, inside diameter, rod holder series, material, and compatible TACO rod holder models remain the same across both options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF31-2202WHA-C: White. This finish works well where the liner needs to blend with white powder-coated hardware, fiberglass areas, or light-colored cockpit and tower details.\u003c\/li\u003e\n\u003cli\u003eF31-2202BKA-C: Black. This finish gives the liner a darker look for black rod holders, black trim, or hardware layouts where contrast is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis liner is for TACO 2200 series flared-style aluminum rod holders in the F31-22 Series. It should be matched to the holder model before ordering, especially when replacing an older liner on a tower, leaning post, rocket launcher, or custom fishing station.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe liner installs inside the rod holder opening and adds a protective lip at the top edge, where rods and reels see frequent contact. It is a practical replacement part for boats used for fishing, coastal cruising with rod storage, or any setup where powder-coated rod holders need extra edge protection during regular use.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the liner with fresh water after saltwater trips and clear away sand, scales, and dried salt from the lip area. Keeping the liner clean helps rods slide in and out smoothly and reduces abrasive buildup around the holder edge.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black","offer_id":51550287167734,"sku":"APL549457-V2","price":13.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550287200502,"sku":"APL549457-V1","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328054_apl549457.webp?v=1787789789"},{"product_id":"apl499882","title":"TACO Marine Flared Weld-On Rod Holder, 9-3\/4 in L, 1-3\/4 in ID, 3\/8 in Coped Blade, Polished Finish, White PVC Liner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-2230BXY-4A is a flared weld-on aluminum rod holder with a 9-3\/4 inch length, 1-3\/4 inch inside diameter, polished finish, white liner, and 3\/8 inch coped blade for welded installation on boat tops and tower structures.\u003c\/p\u003e\u003cp\u003eThis holder is made for fabricated aluminum areas such as towers, T-tops, radar arches, railings, and leaning posts. The flared mouth makes rod placement easier when the boat is moving, while the welded I-Beam pin helps seat the rod butt so the rod stays properly indexed during fishing use.\u003c\/p\u003e\u003cp\u003eThe Brite Dip anodized aluminum finish gives the holder a clean polished look and helps protect the aluminum in a marine environment. The white PVC liner is shaped to work with the flared holder body and helps reduce contact between the rod and the metal tube.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-3\/4 inch overall length and 1-3\/4 inch inside diameter for common offshore and inshore rod setups.\u003c\/li\u003e\n\u003cli\u003e3\/8 inch coped blade for weld-on installation to compatible fabricated aluminum structures.\u003c\/li\u003e\n\u003cli\u003eFlared opening helps guide the rod into place from the cockpit, tower, or leaning post area.\u003c\/li\u003e\n\u003cli\u003eBrite Dip anodized aluminum construction with a polished finish for a clean match on marine tower work.\u003c\/li\u003e\n\u003cli\u003eWelded I-Beam pin seats the rod butt and helps control rod rotation while trolling, drifting, or running between spots.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liner helps protect the rod handle from direct contact with the aluminum holder.\u003c\/li\u003e\n\u003cli\u003eSuitable for welded mounting on towers, T-tops, radar arches, railings, and leaning posts.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a weld-on rod holder, not a clamp-on or screw-mounted accessory. It should be installed by a qualified marine fabricator who can confirm the tube, plate, or frame location, weld compatibility, rod angle, cockpit clearance, and access around canvas, electronics, antennas, and outrigger hardware.\u003c\/p\u003e\u003cp\u003eThe 3\/8 inch coped blade is intended to sit against a compatible mounting surface during fabrication. Before welding, check the rod angle, reel clearance, and how the rod will be removed under load so the finished placement works naturally from the deck or helm area.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rod holder suits sportfishing boats, center consoles, and other fishing-focused layouts that need permanent rod storage or working rod positions on aluminum tops, arches, towers, or leaning posts. It is especially practical where a clean welded installation is preferred over add-on brackets.\u003c\/p\u003e\u003cp\u003eThe polished finish and white liner make it a good match for visible tower and top locations where the hardware needs to look finished while still handling routine saltwater fishing use, washdowns, vibration, and rod movement on board.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use, especially around the liner, pin area, and welded joint. Periodic cleaning helps preserve the polished appearance and keeps salt, grit, and bait residue from building up where the rod handle sits.\u003c\/p\u003e\u003cp\u003eDuring regular boat checks, inspect the liner, welded joint, and surrounding structure for wear or movement. Replace worn liners as needed so rods continue to sit cleanly in the holder without unnecessary metal-to-rod contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550295032054,"sku":"APL499882","price":141.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370336_apl499882_jpeg.jpg?v=1787790020"},{"product_id":"apl319802","title":"TACO Marine Grand Slam 380XL Outrigger Mount, For Hard Tops up to 4-1\/2 in Thick, Offset Handle, SS316, Anodized Aluminum, 12 Locking Positions, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-380XL is a Grand Slam 380XL outrigger top mount with an offset handle, made for hardtop installations on larger center-console fishing boats. It fits hard tops up to 4-1\/2\" thick and is commonly used on boats in the 35 to 50 foot range, where the top may also carry electronics, antennas, lights, and other sport fishing gear.\u003c\/p\u003e\u003cp\u003eThis mount lets the crew control outrigger vertical lift and horizontal rotation from underneath the hardtop, which matters when lines need to be adjusted while trolling or when conditions make working above the top unsafe. It is sold as a port and starboard pair and uses a top-mounted 4\" x 6\" base.\u003c\/p\u003e\u003cp\u003eThe GS-380XL works with TACO Sport Fishing 1-1\/2\" heavy-duty telescopic outriggers in aluminum or carbon fiber. Its longer body helps clear thicker tops, while the offset handle can be set in different positions to suit the available space below the hardtop.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits hardtop applications up to 4-1\/2\" thick, making it suitable for larger center-console boats with thicker tops.\u003c\/li\u003e\n\u003cli\u003eOffset handle layout helps with hand clearance under the top, with handle positions for aft or 90° inboard mounting.\u003c\/li\u003e\n\u003cli\u003eControls outrigger lift and rotation from below the hardtop, so adjustments can be made from the deck while fishing.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO Sport Fishing 1-1\/2\" heavy-duty telescopic outriggers in aluminum or carbon fiber.\u003c\/li\u003e\n\u003cli\u003eType 316 stainless steel and anodized aluminum construction helps the mount handle saltwater exposure when cleaned and maintained properly.\u003c\/li\u003e\n\u003cli\u003eTop-mounted 4\" x 6\" base supports a secure hardtop installation.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for port and starboard outrigger setups.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO backing plates and wedge plates when extra support or top-angle correction is needed.\u003c\/li\u003e\n\u003cli\u003eCovered by a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for hardtop use where the structure can support an outrigger base. For cored or foam-filled tops, spacers should be used where the mounting bolts pass through so the top is not compressed when the hardware is tightened.\u003c\/p\u003e\u003cp\u003eThe installation calls for a 3-1\/8\" center hole and enough clearance around the handle movement. The center of the hole should be located at least 9-1\/2\" from the hardtop frame, vertical post, or any other obstruction that could interfere with the handle.\u003c\/p\u003e\u003cp\u003eBacking plates are recommended when mounting through a hardtop, and wedge plates may be used on arched tops to keep the Grand Slam mounts upright. The pull pin should face outboard for access, which is important during normal cockpit use.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThe GS-380XL suits offshore and coastal trolling setups where the crew needs to deploy, raise, lower, and rotate outriggers without leaving the deck. It is a practical match for larger center consoles that run wider trolling spreads and have hardtops with enough thickness or equipment load to need the XL body length.\u003c\/p\u003e\u003cp\u003eBecause the controls sit below the top, the mount is especially useful when the boat is moving, when seas are rough, or when quick outrigger adjustments are part of the fishing routine.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe stainless steel and anodized aluminum construction is built for marine use, but it still needs normal saltwater care. Rinse the mounts and outriggers thoroughly with fresh water after use, and avoid wax or caustic cleaners on the components.\u003c\/p\u003e\u003cp\u003eFor long-term operation, use a marine-grade lubricant that resists washing away and keep the moving points clean. This helps the handles and locking hardware continue to move the way they should through repeated fishing trips.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePort and starboard GS-380XL outrigger mounts\u003c\/li\u003e\n\u003cli\u003eRotator handles\u003c\/li\u003e\n\u003cli\u003eVinyl tubing spacers\u003c\/li\u003e\n\u003cli\u003e5\/16 x 18 mounting hardware\u003c\/li\u003e\n\u003cli\u003eNylon washers and stainless washers\u003c\/li\u003e\n\u003cli\u003eStainless lock nuts and stainless acorn nuts for the GS-380XL\u003c\/li\u003e\n\u003cli\u003eHex bolts for the rotator handles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550336844022,"sku":"APL319802","price":3809.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715645_apl319802.jpg?v=1787791350"},{"product_id":"apl777652","title":"TACO Marine Grand Slam Backing Plate, For GS-850 \u0026 GS-950","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine BP-850AEY is a backing plate for TACO Grand Slam GS-850 and GS-950 installations on a T-top. It is made for the mounting base area, where added support matters when outrigger hardware is exposed to vibration, boat motion, and the load changes that come with trolling or running in choppy water.\u003c\/p\u003e\u003cp\u003eThis backing plate matches the existing base hole pattern for the GS-850 and GS-950, so the installation can be completed without drilling additional holes when it is used with the correct base. For boat owners or riggers refreshing a T-top setup, it is a practical way to strengthen the mounting point while keeping the installation clean.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO Grand Slam GS-850 and GS-950 mounting applications.\u003c\/li\u003e\n\u003cli\u003eMatches the existing base hole pattern to keep installation straightforward.\u003c\/li\u003e\n\u003cli\u003eNo additional drilling is required when used with the matching GS-850 or GS-950 base.\u003c\/li\u003e\n\u003cli\u003eAdds support at the T-top mounting point for outrigger hardware.\u003c\/li\u003e\n\u003cli\u003eClean appearance for installations where the backing plate remains visible around the base area.\u003c\/li\u003e\n\u003cli\u003eCovered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck that the existing hardware is a TACO Grand Slam GS-850 or GS-950 before installation. The backing plate is meant to align with those bases, which helps avoid layout changes on the T-top and reduces the chance of unnecessary new holes in the mounting surface.\u003c\/p\u003e\u003cp\u003eAs with any T-top mounted hardware, inspect the surrounding structure before tightening the assembly. The surface should be clean, solid, and properly prepared so the backing plate can do its job at the mounting point.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part is a good match for center consoles, sportfishing boats, and other T-top equipped vessels using GS-850 or GS-950 Grand Slam hardware. It is especially useful when the goal is to add support to an existing installation or complete a clean new mount without changing the factory hole pattern.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTACO Marine GS-850 and GS-950 backing plate\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550347919606,"sku":"APL777652","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370529_apl777652_jpeg.jpg?v=1787791756"},{"product_id":"apl435032","title":"TACO Marine Cork Outrigger Line Stops, 3\/16 in Hole, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Cork Outrigger Line Stops is a pair of cork stops for outrigger rigging, used to protect outrigger guides and release clips while helping prevent snags when baits are deployed. This is a simple part, but it matters in a trolling spread because a clean-moving outrigger line reduces hang-ups and keeps the rigging easier to manage from the cockpit.\u003c\/p\u003e\u003cp\u003eEach stop is made from cork and has a 3\/16-inch diameter hole for rigging. The range is offered in 1-1\/4-inch and 1-3\/4-inch diameters, so the main choice is the stop size that best suits the existing outrigger setup and the amount of stop surface wanted at the guide or release point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCork construction keeps the stop light on the outrigger line while still giving it a practical contact surface.\u003c\/li\u003e\n\u003cli\u003eHelps protect outrigger guides and release clips from direct contact during normal bait deployment.\u003c\/li\u003e\n\u003cli\u003eHelps reduce snags in outrigger guides, which is useful when setting or resetting trolling baits.\u003c\/li\u003e\n\u003cli\u003e3\/16-inch diameter rigging hole supports straightforward installation on compatible outrigger line setups.\u003c\/li\u003e\n\u003cli\u003eAvailable in 1-1\/4-inch and 1-3\/4-inch diameters for different outrigger rigging preferences.\u003c\/li\u003e\n\u003cli\u003eSold in pairs, matching the way many outrigger line stop installations are handled on port and starboard setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two diameter options for different outrigger rigging layouts.\u003c\/p\u003e\u003cp\u003eThe diameter changes between the variants, while the cork material, 3\/16-inch rigging hole, and pair packaging are consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCOK-0017-2: 1-1\/4-inch diameter. This smaller stop keeps the setup compact while still giving the outrigger line a cork stop for guide and release clip protection.\u003c\/li\u003e\n\u003cli\u003eCOK-0018-2: 1-3\/4-inch diameter. This larger stop gives more contact area at the stopping point, which can be useful on setups where a bigger stop is easier to see and handle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThese stops are meant to be rigged onto the outrigger line through the center hole. Once positioned as part of the rigging, the cork stop acts as a buffer point so the line hardware is less likely to pull directly into the guide or release clip area.\u003c\/p\u003e\u003cp\u003eThey are most relevant for offshore and coastal trolling boats that use outriggers for bait presentation. For best fit, match the stop diameter to the existing outrigger layout, line path, and available clearance around the guide and release clip.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of cork outrigger line stops\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"1-3\/4-Inch","offer_id":51550362042614,"sku":"APL435032-V1","price":20.99,"currency_code":"USD","in_stock":false},{"title":"1-1\/4-Inch","offer_id":51550362075382,"sku":"APL435032-V8","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1326782_apl435032_jpeg.jpg?v=1787792036"},{"product_id":"apl629769","title":"TACO Marine ShadeFin Mini Boat Shade, White Fabric, Square Rail Mount Kit, Bag","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-4000-5 is a ShadeFin Mini boat shade with white WeatherMAX 3D fabric, a storage bag, and a square rail mount kit. It gives small boats and exposed deck areas a practical way to add shade without installing a full canvas top or hardtop extension.\u003c\/p\u003e\u003cp\u003eThe shade has a 60 in x 38 in coverage area, adjusts in height from 36 in to 52 in, and folds down to about 38 in x 6 in x 5 in when it is not deployed. The adjustable angle helps keep coverage where it is needed as the sun moves, whether the boat is at the dock, drifting, anchored, or running at low speed in calm conditions.\u003c\/p\u003e\u003cp\u003eThis version includes the square rail mount kit, making it a good fit for boats with a compatible square rail location near a casting deck, cockpit seat, helm area, or passenger space. The white fabric keeps the look clean and neutral while adding UPF 50+ sun protection for crew and gear.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIncludes white ShadeFin Mini fabric, storage bag, and square rail mount kit for a complete square-rail installation.\u003c\/li\u003e\n\u003cli\u003e60 in x 38 in shade coverage helps protect one focused area on deck, in the cockpit, or near a seating position.\u003c\/li\u003e\n\u003cli\u003eHeight adjusts from 36 in to 52 in, giving flexibility for different deck layouts and seating heights.\u003c\/li\u003e\n\u003cli\u003eAngle adjustment lets the shade be repositioned as sun direction changes during the day.\u003c\/li\u003e\n\u003cli\u003eFolds to about 38 in x 6 in x 5 in for easier storage in a locker, under a seat, or with other canvas gear.\u003c\/li\u003e\n\u003cli\u003eWhite WeatherMAX 3D fabric carries a UPF 50+ rating and resists UV exposure, mildew, and corrosion-related wear in marine use.\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum frame, anodized aluminum parts, injection-molded nylon components, and stainless-steel fasteners help it stand up to the wet, sunny boat environment.\u003c\/li\u003e\n\u003cli\u003eMultiple ShadeFin Mini units can be clustered when a larger shaded area is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis model is intended for use with a square rail mounting point. Before installation, confirm that the rail location gives the shade enough room to open, angle, and fold without hitting electronics, rod holders, steering components, antennas, canvas, or people moving around the boat.\u003c\/p\u003e\u003cp\u003eThe portable format works well when shade is needed only during certain parts of the day. It can be set up for a casting deck, cockpit lounge area, helm-adjacent seat, or passenger spot, then folded and stowed when the boat needs a cleaner deck layout.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis shade suits skiffs, bay boats, flats boats, pontoons, kayaks, and other boats where fixed shade is limited or not practical. It is especially useful for fishing days, sandbar stops, dockside lounging, and slow cruising when one person or a small seating area needs focused sun coverage.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe frame and hardware use materials selected for marine exposure, including aluminum construction, nylon components, and stainless-steel fasteners. Rinsing the shade, mount, and hardware with fresh water after saltwater use helps reduce buildup and keeps moving parts easier to handle over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eShadeFin Mini with white fabric\u003c\/li\u003e\n\u003cli\u003eStorage bag\u003c\/li\u003e\n\u003cli\u003eSquare rail mount kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550392090870,"sku":"APL629769","price":579.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324046_apl629769.webp?v=1787793133"},{"product_id":"apl497442","title":"TACO Marine Weather Seal Tape, 10 ft, 3\/8 in H, 5\/8 in W, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0109B10-1 is a black weather seal tape for sealing hatches, live wells, exterior doors, instrument covers, electronic boxes, access compartments, windows, and windshield areas on a boat. It measures 10' long x 5\/8\" wide x 3\/8\" high, giving you a practical strip size for small sealing jobs, replacement work, and noise reduction around lids or panels.\u003c\/p\u003e\u003cp\u003eThis tape uses a flexible sponge rubber construction with a medium closed-cell density and a heavy-duty self-adhesive backing. It helps reduce leaks, rattling, vibration, and shock where panels meet frames, especially in areas exposed to spray, sunlight, temperature swings, and regular washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10' length with a 5\/8\" width and 3\/8\" height for boat hatches, doors, compartments, and covers.\u003c\/li\u003e\n\u003cli\u003eBlack weather seal tape that blends neatly with many deck fittings, hatch frames, and access panels.\u003c\/li\u003e\n\u003cli\u003eFlexible sponge rubber with medium closed-cell density helps block water intrusion and reduce rattling.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty self-adhesive backing supports cleaner installation without separate mechanical fasteners.\u003c\/li\u003e\n\u003cli\u003eHelps absorb shock and vibration where lids, panels, or doors close against a hard surface.\u003c\/li\u003e\n\u003cli\u003eSuitable for live wells, exterior doors, instrument covers, electronic boxes, access compartments, windows, and windshield areas.\u003c\/li\u003e\n\u003cli\u003eResists water absorption, sunlight damage, and temperature extremes common in marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the tape on a clean, dry surface so the adhesive can make full contact with the mounting area. Old adhesive, wax, salt residue, oil, and loose paint should be removed before application. Press the strip firmly along the full length, especially around corners and ends, to help the seal sit evenly against the mating surface.\u003c\/p\u003e\u003cp\u003eFor hatches, access doors, and electronics covers, check the closing pressure after installation. The seal should compress enough to reduce water entry and rattling without forcing the latch or hinge out of alignment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis weather seal is a useful match for boat owners replacing worn gasket material around compartments, small doors, live wells, and protective covers. It also works well for quieting lids and panels that chatter underway, especially on fishing boats, center consoles, runabouts, pontoons, and cruisers that see spray, vibration, and regular deck washing.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550392123638,"sku":"APL497442","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323590_apl497442_jpeg.jpg?v=1787793132"},{"product_id":"apl374651","title":"TACO Marine ShadeFin Mini Rod Holder Mount, For 1.75 in+ Rod Holders, 6061 Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-4000-10 is a ShadeFin Mini rod holder mount for adding the ShadeFin Mini boat shade to an existing rod holder location. It fits standard rod holders with an inside diameter of 1.75 inches or greater, giving boat owners a clean way to set shade near the cockpit, fishing area, helm, or seating space without adding a permanent deck mount.\u003c\/p\u003e\u003cp\u003eThis is the mount only, made for use with the TACO ShadeFin Mini system. The 9-1\/4 inch mount uses aluminum-grade 6061 alloys with a powder-coated misty silver finish, plus a Type-304 stainless steel threaded rod and an injection-molded nylon cap for the tightening point.\u003c\/p\u003e\u003cp\u003eOnce installed in the rod holder, the mount can stay in place when the shade is not being used, or it can be loosened, removed, and stowed. That makes it a practical option for boats where shade needs change between fishing, cruising, anchoring, and dockside time.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits standard rod holders with an inside diameter of 1.75 inches or greater.\u003c\/li\u003e\n\u003cli\u003eMade for attaching a TACO ShadeFin Mini to a rod holder location.\u003c\/li\u003e\n\u003cli\u003eAluminum-grade 6061 alloy construction with a powder-coated misty silver finish.\u003c\/li\u003e\n\u003cli\u003eType-304 stainless steel threaded rod with an injection-molded nylon cap for secure tightening.\u003c\/li\u003e\n\u003cli\u003e9-1\/4 inch overall length for a compact fit in the rod holder area.\u003c\/li\u003e\n\u003cli\u003eCan remain in the rod holder when not in use, or be removed and stowed after loosening.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward: insert the mount into a compatible rod holder, tighten it until snug, and attach the ShadeFin Mini. The setup works well for boats that already have rod holders in useful shade positions, especially center consoles, bay boats, skiffs, pontoons, and fishing boats where a fixed shade mount may not be the best fit.\u003c\/p\u003e\u003cp\u003eBefore ordering, measure the inside diameter of the rod holder and confirm that the location gives the ShadeFin Mini enough room to open, angle, and clear nearby rails, leaning posts, outriggers, rods, antennas, or canvas.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for the TACO ShadeFin Mini and standard rod holders with an inside diameter of 1.75 inches or greater. It is not a universal umbrella base and it is not the complete ShadeFin Mini shade assembly, so the shade unit must be purchased separately unless it is already on board.\u003c\/p\u003e\u003cp\u003eIt is a good match for boaters who want shade that can move with the day rather than stay fixed in one permanent mounting position. The rod holder location also helps keep the mounting point off the walking surface, which can be useful on smaller decks and open cockpit layouts.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe aluminum alloy body, powder-coated finish, stainless steel threaded rod, and nylon cap are suited to regular boat use where hardware may see spray, sun, and vibration. Rinse the mount with fresh water after saltwater trips, check the tightening point before each use, and stow it dry when it will not be used for an extended period.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550401396982,"sku":"APL374651","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715630_apl374651.jpg?v=1787793477"},{"product_id":"apl131824","title":"TACO Marine 4-Rod Hanger Rack, Polished 316L SS, White Poly Rack, Spring-Lock","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2752-1 is a 4-rod hanger rack made for secure rod and reel storage on boats where space is tight and gear needs to stay put. It uses polished Type 316 stainless steel rod hanger components with white UV-stabilized polymer racks, giving the rack a clean look while handling the salt, sun, and washdown-prone areas common around fishing boats.\u003c\/p\u003e\u003cp\u003eThis rack measures 18 inches long with a 1-1\/2 inch width and is sold as a pair. The spring-lock rod tip holder helps keep rods seated in position, which is useful when the boat is moving, when rods are stored under gunnels, or when overhead storage is used on a bridge, cabin, locker, or covered cockpit area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStores up to four rods in a space-saving hanger layout for rod lockers, bridge overheads, under-gunnel areas, cabins, garages, or dockside storage spaces.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316 stainless steel components suit marine environments where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized polymer racks help resist sun exposure and keep the installation looking clean.\u003c\/li\u003e\n\u003cli\u003eSpring-lock rod tip holder keeps rod tips secured instead of letting rods slide or bounce free while underway.\u003c\/li\u003e\n\u003cli\u003ePre-drilled racks with recessed mounting holes simplify installation and keep fasteners neatly seated.\u003c\/li\u003e\n\u003cli\u003eSmooth beveled rack edges give the mounted setup a finished look without sharp visual transitions.\u003c\/li\u003e\n\u003cli\u003eCan be mounted vertically, horizontally, or overhead, giving flexibility for different storage spaces on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe rack is built for fixed mounting to a solid surface, so placement should be checked against rod length, reel clearance, and nearby hatches or seating before drilling. Its 18 inch length makes it useful where four rods need to be stored together without taking up deck space.\u003c\/p\u003e\u003cp\u003eFor best results on board, mount it to a backing surface that can handle the load of the stored rods and reels. In saltwater use, stainless mounting hardware and proper bedding around drilled holes help protect the mounting surface from moisture intrusion.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis hanger rack is a practical fit for anglers who want rods organized between runs, during transport, or when the boat is back at the dock. It works well for keeping rod and reel combos off the deck, away from foot traffic, and grouped in one easy-to-reach storage location.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of 4-rod hanger racks\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550429348086,"sku":"APL131824","price":398.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370299_apl131824_jpeg.jpg?v=1787794557"},{"product_id":"apl916445","title":"TACO Marine OC Series Center Rigger Pole, For 1-1\/8 in Mounts, Telescoping, Anodized Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine OC Series is a telescoping aluminum center rigger pole range for offshore trolling setups that use a 1-1\/8 inch butt end diameter. It fits TACO Marine center rigger top mounts and other compatible mounts that accept 1-1\/8 inch poles, giving anglers a clean way to run a center line from a hardtop, tower, T-top, or similar mounting point.\u003c\/p\u003e\u003cp\u003eEach pole uses satin and polished anodized aluminum with stainless springs, button, and eyelets, so it is suited to the saltwater environment and repeated rigging cycles. The pole telescopes down for bridge clearance, trailering, and storage, with 8 foot and 12 foot versions available to match different boat sizes and spread preferences.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTelescoping center rigger pole for bluewater trolling, bait presentation, and adding a center line to an offshore spread.\u003c\/li\u003e\n\u003cli\u003e1-1\/8 inch butt end diameter for use with TACO Marine center rigger mounts and other mounts that accept the same pole diameter.\u003c\/li\u003e\n\u003cli\u003eSatin and polished anodized aluminum construction helps the pole handle saltwater exposure while keeping weight manageable.\u003c\/li\u003e\n\u003cli\u003eStainless springs, button, and eyelets support repeated extension, retraction, and rigging use on the boat.\u003c\/li\u003e\n\u003cli\u003eTelescopes down for bridge clearance, trailering, and storage when the boat is not actively fishing.\u003c\/li\u003e\n\u003cli\u003eAvailable in 8 foot and 12 foot lengths, with finish combinations that coordinate with common outrigger and hardtop hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis center rigger pole is offered in multiple configurations, with the main differences being pole length and the finish combination used on the pole, rings, and tips.\u003c\/p\u003e\u003cp\u003eThe 8 foot versions suit boats up to 30 feet, while the 12 foot versions suit boats up to 40 feet. The 1-1\/8 inch butt end diameter remains the key fit point across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOC-0422BKA8: Black\/Silver finish, 8 foot length. This option gives the pole a black body with silver rings and tips, a common match for darker hardtops, black outrigger hardware, and modern console trim.\u003c\/li\u003e\n\u003cli\u003eOC-0421VEL8: Silver\/Gold finish, 8 foot length. This option pairs a silver pole with gold rings and tips for boats that use gold-tone accent hardware in the trolling spread.\u003c\/li\u003e\n\u003cli\u003eOC-0422VEL8: Silver\/Silver finish, 8 foot length. This option keeps the full look understated with silver rings and tips, which works well with polished aluminum towers, rails, and light-colored tops.\u003c\/li\u003e\n\u003cli\u003eOC-0432BKA116: Black\/Silver finish, 12 foot length. This longer version gives more reach for boats that need a wider centerline presentation while keeping the black and silver finish combination.\u003c\/li\u003e\n\u003cli\u003eOC-0432VEL116: Silver\/Silver finish, 12 foot length. This longer version keeps the silver finish theme and is a clean match for boats with polished or satin aluminum deck hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFit starts with the mount. This pole range is made around a 1-1\/8 inch butt end diameter, so the receiving center rigger mount or compatible outrigger mount must accept that size. It works with TACO Marine Grand Slam outrigger top mounts, Striker bases, and other compatible mounts that accept 1-1\/8 inch outriggers.\u003c\/p\u003e\u003cp\u003eBefore installation, check the mount location for overhead clearance, trailer height, and the path of the rigging line. On hardtops and towers, the telescoping action helps when moving under bridges or storing the boat, but the mount still needs a secure, properly backed location that can handle trolling loads and boat motion.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis pole is a practical match for center console and sport fishing boats that troll offshore and need a center rigger position without adding a full outrigger pair. It helps manage a center bait or lure from a high point on the boat, which can clean up the spread and keep line placement more organized while fishing.\u003c\/p\u003e\u003cp\u003eThe 8 foot versions make sense where compact storage and smaller boat layouts matter most. The 12 foot versions give more reach for larger boats and wider trolling spreads.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the pole with fresh water and let it dry before storage. Pay extra attention to the telescoping sections, eyelets, button, and spring areas, since salt and grit can collect around moving parts after a long day offshore.\u003c\/p\u003e\u003cp\u003eStore the pole retracted when it is not in use, and avoid letting metal hardware scrape the anodized surface during transport. A light inspection before each trip helps confirm that the sections extend smoothly and the rigging points are ready for use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black\/Silver \/ 12-Inch","offer_id":51550449533174,"sku":"APL916445-V1","price":409.99,"currency_code":"USD","in_stock":false},{"title":"Silver\/Silver \/ 8-Inch","offer_id":51550449565942,"sku":"APL916445-V4","price":333.99,"currency_code":"USD","in_stock":false},{"title":"Silver\/Gold \/ 8-Inch","offer_id":51550449598710,"sku":"APL916445-V9","price":349.99,"currency_code":"USD","in_stock":false},{"title":"Silver\/Silver \/ 12-Inch","offer_id":51550449631478,"sku":"APL916445-V5","price":409.99,"currency_code":"USD","in_stock":false},{"title":"Black\/Silver \/ 8-Inch","offer_id":51550449664246,"sku":"APL916445-V8","price":333.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370829_apl916445_jpeg.jpg?v=1787795074"},{"product_id":"apl130687","title":"TACO Marine Adhesive Mount Rigging Strip, 12 in, White Exterior-Grade PVC, Pre-Drilled","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P01-1200W is a 12-inch adhesive mount rigging strip for keeping fishing pre-rigs, plugs, and spoons organized on board. It gives anglers a simple place to stage tackle where it can be reached quickly, instead of leaving leaders and lures loose in a tackle tray, leaning post compartment, or cockpit locker.\u003c\/p\u003e\u003cp\u003eThis white rigging strip is made from exterior-grade PVC and uses a marine-grade peel-and-stick adhesive for mounting to a clean, flat surface. Pre-drilled holes give another practical installation option when a mechanical fastener is preferred for the chosen location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-inch rigging strip sized for storing pre-rigs, plugs, and spoons within easy reach.\u003c\/li\u003e\n\u003cli\u003eAdhesive mount layout works on flat surfaces such as cockpit areas, tackle stations, consoles, or other clean mounting panels.\u003c\/li\u003e\n\u003cli\u003eMarine-grade peel-and-stick adhesive helps simplify installation without needing a separate backing plate.\u003c\/li\u003e\n\u003cli\u003ePre-drilled holes support a fastener-based installation when the surface and application call for extra hold.\u003c\/li\u003e\n\u003cli\u003eExterior-grade PVC body is suited for exposed marine use and everyday contact with spray, sun, and fishing gear.\u003c\/li\u003e\n\u003cli\u003eWhite finish blends well with many fiberglass interiors, consoles, and cockpit layouts.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMount the strip on a flat, clean, dry surface where rigs can hang or rest without interfering with hatches, seating, rod holders, or foot traffic. Common locations include the side of a console, near a leaning post, inside a tackle station, or close to the cockpit area where lures and leaders are changed during a fishing day.\u003c\/p\u003e\u003cp\u003eFor adhesive mounting, surface preparation matters. Remove wax, salt, oil, and moisture before placement so the peel-and-stick backing can make full contact. When installing in a high-contact area or on a surface that may flex, the pre-drilled holes allow the strip to be secured with suitable hardware for the mounting surface.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rigging strip is a useful fit for center consoles, bay boats, walkarounds, and other fishing boats where quick tackle changes are part of the routine. It helps keep rigged leaders, spoons, and plugs separated and visible, which is especially helpful when trolling, casting around structure, or switching presentations during a bite.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550515265782,"sku":"APL130687","price":18.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371296_apl130687_jpeg.jpg?v=1787795786"},{"product_id":"apl740361","title":"TACO Marine Electric Seat Slide, For 23-28 in Seats, 13-1\/8 x 10 in, 12V, IP66, 5 in Travel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine M20-1013E is a 13-1\/8\" x 10\" electric low-profile seat slide for boat seats from 23\" to 28\" wide. It gives the helm or companion seat up to 5\" of fore-and-aft travel, with the electric actuator allowing the seat to stop anywhere between the fully retracted and fully extended positions.\u003c\/p\u003e\u003cp\u003eThis seat slide runs on 12V DC power with a 9 amp maximum current draw. The assembly has an IP66 water-resistant rating, a 3500N maximum load rating, and 1500N push and pull force, which makes it a practical upgrade for helm seats, leaning-post seating, and box-mounted seating where quick position adjustment matters underway.\u003c\/p\u003e\u003cp\u003eThe low-profile track uses a precision-machined 6000-series aluminum chassis with an acid-etched clear anodized finish. Its rail and linear glide system is self-lubricating, dirt resistant, corrosion free, and built to keep movement smooth in the salt, spray, vibration, and grit found around marine seating areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits boat seats from 23\" to 28\" wide, with a 13-1\/8\" x 10\" slide footprint and 2-1\/4\" overall height.\u003c\/li\u003e\n\u003cli\u003eProvides up to 5\" of seat travel, with stop-anywhere electric adjustment between full extension and full retraction.\u003c\/li\u003e\n\u003cli\u003e12V DC actuator draws up to 9 amps, making it suitable for typical marine DC electrical systems when wired with proper circuit protection.\u003c\/li\u003e\n\u003cli\u003eIP66 water-resistant rating helps protect the actuator and slide assembly from spray, washdowns, and wet cockpit conditions.\u003c\/li\u003e\n\u003cli\u003eRated for 3500N maximum load with 1500N push and pull force, with actuator speed of 13.5 mm\/sec at 1500N.\u003c\/li\u003e\n\u003cli\u003eSelf-locking actuator holds the seat position at rated loads without a separate manual locking lever.\u003c\/li\u003e\n\u003cli\u003eMeets H31 testing standards for seat applications, supporting use in marine seating installations where safety and stability matter.\u003c\/li\u003e\n\u003cli\u003ePrecision-machined 6000-series aluminum chassis with an acid-etched clear anodized finish helps resist corrosion in marine environments.\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating rail and linear glide system resists dirt buildup and keeps the seat moving smoothly with less routine service.\u003c\/li\u003e\n\u003cli\u003eUniversal mounting bolt pattern works with both pedestal and box seat applications, which helps simplify replacement or upgrade projects.\u003c\/li\u003e\n\u003cli\u003eQuiet operation at or below 58 dB keeps seat adjustment from becoming intrusive at the helm or in a cockpit seating area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis slide is a good match for boat owners upgrading from a fixed or manually sliding seat to an electric adjustment setup, especially at the helm where reach to the wheel, throttle, displays, and footrest changes between operators. The universal mounting pattern supports pedestal and box applications, but the existing seat base, deck structure, and fastener layout should be checked before installation.\u003c\/p\u003e\u003cp\u003eBecause the unit is electric, the mounting location needs access to a properly protected 12V DC circuit and enough clearance for the full 5\" travel range. The seat, slide, and mounting surface should all move freely without fouling the console, side panels, cushions, or nearby hardware.\u003c\/p\u003e\u003ch6\u003eElectrical and on-board use\u003c\/h6\u003e\u003cp\u003eThe 12V DC actuator is useful on center consoles, sport-fishing boats, cruisers, and other helm layouts where seating position changes during docking, cruising, or long runs. The self-locking function helps the seat stay where it is set, while the low operating noise keeps adjustments discreet in enclosed helms or quiet cockpit areas.\u003c\/p\u003e\u003cp\u003eAs with any powered seating component, wiring should be routed where it is protected from chafe, standing water, and pinch points created by seat movement. Confirm polarity, fuse protection, and cable strain relief during installation so the slide remains dependable through repeated adjustments.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe self-lubricating glide system reduces the need for added lubrication, but the slide should still be rinsed with fresh water after saltwater exposure and kept free of sand, fish debris, and cleaning residue. Periodic checks of the mounting hardware, wiring, and travel path help keep the seat adjustment smooth and secure through regular use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550575001846,"sku":"APL740361","price":1294.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370619_apl740361_jpeg.jpg?v=1787796672"},{"product_id":"apl024337","title":"TACO Marine ShadeFin Mini Boat Sun Shade Kit, Kayak Mount, Carry Bag, 60 x 38 in Coverage, 36-52 in Height, WeatherMAX 3D, UPF 50+","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine ShadeFin Mini is a portable boat shade for small craft and open deck areas where fixed canvas is not practical. This parent product covers the kayak mount kit version with WeatherMAX 3D fabric in white or black, giving paddlers and boaters a compact shade setup that can move with the sun rather than staying locked in one position.\u003c\/p\u003e\u003cp\u003eThe shade area measures 60\" x 38\", with height adjustment from 36\" to 52\" for different seating positions and mounting needs. When it is not deployed, it folds down to 38\" x 6\" x 5\", so it can fit into tighter storage spaces on a kayak, skiff, bass boat, pontoon, or tender.\u003c\/p\u003e\u003cp\u003eThe frame uses powder-coated aluminum, injection-molded nylon components, stainless-steel fasteners, and anodized aluminum parts. The WeatherMAX 3D fabric carries a UPF 50+ rating and is made to resist UV exposure, corrosion, and mildew in normal marine use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60\" x 38\" coverage area helps shade the helm, seating position, or fishing station on compact boats and kayaks.\u003c\/li\u003e\n\u003cli\u003eHeight adjusts from 36\" to 52\" for better placement over seated users and low-profile deck layouts.\u003c\/li\u003e\n\u003cli\u003eFolds to 38\" x 6\" x 5\" when stowed, which helps on boats with limited locker or hatch space.\u003c\/li\u003e\n\u003cli\u003eVirtually unlimited angle adjustment lets the shade be repositioned as sun angle changes during the day.\u003c\/li\u003e\n\u003cli\u003eWeatherMAX 3D fabric with UPF 50+ rating helps reduce direct sun exposure on long runs, fishing sessions, and dockside breaks.\u003c\/li\u003e\n\u003cli\u003ePowder-coated aluminum frame, injection-molded nylon components, stainless-steel fasteners, and anodized aluminum parts support use around spray, vibration, and outdoor storage.\u003c\/li\u003e\n\u003cli\u003eKayak mount kit and bag are included with these configurations for paddle craft and portable use.\u003c\/li\u003e\n\u003cli\u003eMultiple ShadeFin Mini units can be clustered when a larger shaded area is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis ShadeFin Mini kayak mount kit is offered in two fabric color configurations.\u003c\/p\u003e\u003cp\u003eThe fabric color changes between variants, while the kayak mount kit, bag, 60\" x 38\" shade area, 36\" to 52\" height adjustment, folding size, WeatherMAX 3D fabric, UPF 50+ rating, and frame construction remain consistent across these two configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eT10-4000-18: White fabric. The white canopy gives the setup a clean look that pairs well with light hulls, decks, and kayak finishes.\u003c\/li\u003e\n\u003cli\u003eT10-4000-19: Black fabric. The black canopy gives the shade a more subdued look for darker boats, fishing kayaks, and low-glare deck layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis version includes the kayak mount kit, making it suited to paddle craft and small boats where a portable shade needs to attach without a full bimini frame. The compact folded size also makes it practical to remove and store when trailering, beaching, or carrying gear between the vehicle and launch site.\u003c\/p\u003e\u003cp\u003eThe adjustable height and angle control are useful when the boat changes heading or the sun shifts during the afternoon. On a kayak or skiff, that flexibility can help keep shade over the seating area without taking up the space of a larger fixed top.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup suits kayak anglers, families in small open boats, and boaters who need shade over a single seating or fishing position rather than full-deck coverage. It also works well as a portable shade option for bass boats, flats boats, bay boats, pontoons, skiffs, and other boats with limited built-in sun protection.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eShadeFin Mini sun shade\u003c\/li\u003e\n\u003cli\u003eWeatherMAX 3D fabric canopy in the selected color\u003c\/li\u003e\n\u003cli\u003eCarrying bag\u003c\/li\u003e\n\u003cli\u003eKayak mount kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"White Fabric","offer_id":51550610260214,"sku":"APL024337-V3","price":579.99,"currency_code":"USD","in_stock":false},{"title":"Black Fabric","offer_id":51550610292982,"sku":"APL024337-V8","price":579.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0716265_apl024337.jpg?v=1787796975"},{"product_id":"apl948082","title":"TACO Marine Standard Outrigger Release Clips, Stainless Steel and Plastic, Tension Adjustment, Light and Medium Duty, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine COK-0001B-2 is a pair of standard outrigger release clips for light and medium-duty trolling setups. Each clip combines stainless steel and plastic construction with an adjustable tension setting, giving anglers control over how firmly the line is held before release.\u003c\/p\u003e\u003cp\u003eThese clips are used in outrigger rigging to help manage bait presentation while trolling from center consoles, sportfishing boats, and other fishing vessels with outriggers. The adjustable release pressure is useful when changing between lighter baits, medium trolling spreads, or different sea conditions.\u003c\/p\u003e\u003cp\u003eThe set includes two clips, so it can outfit both sides of a typical outrigger spread or replace a worn pair in an existing rigging setup. A 1-year limited warranty is included.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStandard outrigger release clip set for light and medium-duty fishing applications.\u003c\/li\u003e\n\u003cli\u003eAdjustable tension helps fine-tune release pressure for different trolling setups.\u003c\/li\u003e\n\u003cli\u003eStainless steel and plastic construction supports use in a saltwater fishing environment.\u003c\/li\u003e\n\u003cli\u003eSold as a pair for port and starboard outrigger rigging or two replacement positions.\u003c\/li\u003e\n\u003cli\u003eWorks as a straightforward replacement or upgrade part within standard outrigger line systems.\u003c\/li\u003e\n\u003cli\u003eIncludes a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo standard outrigger release clips\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThese clips are intended to be installed as part of an outrigger line setup, where they hold and release the fishing line during trolling. The tension adjustment should be set so the line stays secure while the bait runs properly, then releases cleanly when a fish strikes or when the angler needs to clear the spread.\u003c\/p\u003e\u003cp\u003eThey are a practical match for anglers who run light to medium trolling presentations and want a simple clip system that can be adjusted without changing the rest of the outrigger hardware.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the clips with fresh water and allow them to dry before storage. Check the adjustment hardware and contact points regularly, especially after long trolling days, offshore runs, or periods where the boat is stored outside in sun and spray.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550646108406,"sku":"APL948082","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370337_apl948082_jpeg.jpg?v=1787797211"},{"product_id":"apl298217","title":"TACO Marine 2-Rod Hanger Rack, Polished Stainless Steel, White UV-Stabilized Poly Rack, 1-1\/2 in x 9-1\/8 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2751-1 is a 2-rod hanger rack for keeping fishing rods secured and organized on board, with polished stainless steel hardware and white UV-stabilized poly racks. It is sized at 1-1\/2 inches wide by 9-1\/8 inches long and supplied as a pair, giving you a clean two-position storage setup for rod and reel combinations.\u003c\/p\u003e\u003cp\u003eThis rack uses a patented spring-lock rod tip holder to help keep rods in position while the boat is docked, under way, or being prepared for the next trip. The high-polished Type 316L stainless steel works well in exposed marine areas, while the poly rack supports help separate and cradle the rods without making the installation look bulky.\u003c\/p\u003e\u003cp\u003eIt suits cockpit, cabin, console, leaning post, dockside, garage, or tackle-station storage where rods need to stay off the deck and easy to reach. The rack can be mounted vertically, horizontally, or overhead, so it can be worked into tight boat layouts without forcing a single storage orientation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds two fishing rods in a clean rack format for organized rod and reel storage.\u003c\/li\u003e\n\u003cli\u003ePatented spring-lock rod tip holder helps keep rods locked in position during storage and movement around the boat.\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type 316L stainless steel components suit saltwater and exposed deck environments.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized poly racks stand up to sun exposure and keep the storage area looking neat.\u003c\/li\u003e\n\u003cli\u003ePre-drilled recessed mounting holes help simplify installation and keep fasteners seated cleanly.\u003c\/li\u003e\n\u003cli\u003eConcealed fastener layout and beveled rack edges give the finished installation a tidy appearance.\u003c\/li\u003e\n\u003cli\u003eMounts vertically, horizontally, or overhead for use in cockpits, cabins, garages, docks, and fishing stations.\u003c\/li\u003e\n\u003cli\u003eFlush-mount rack style keeps rods close to the mounting surface instead of projecting far into walkways.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe rack mounts with recessed holes, so the surface should be flat, solid, and suitable for fasteners before installation. Common locations include bulkheads, console sides, cabin walls, under hardtops, dock panels, and storage areas where rods can sit clear of feet, hatches, and moving gear.\u003c\/p\u003e\u003cp\u003eBecause the rack can be installed in more than one orientation, check rod length, reel clearance, and nearby traffic paths before drilling. Overhead mounting can help save wall space, while vertical or horizontal mounting may be easier to access when rods are used often during fishing days.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eThe polished stainless and white poly finish gives this rack a clean look that fits many center consoles, sport-fishing boats, pontoons, and utility storage areas. Type 316L stainless steel is a practical choice for marine hardware, especially where spray, damp air, and washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eFor best long-term appearance, rinse salt and dirt from the rack during routine boat cleaning and avoid leaving abrasive grit trapped against the polished stainless or poly surfaces.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis 2-rod rack is a good match for boaters who want a fixed storage point for a small rod set rather than loose rods leaning in a corner or lying across the deck. It works especially well for keeping frequently used rods staged near the cockpit, helm area, cabin entry, or dockside rigging station.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550710628598,"sku":"APL298217","price":202.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370297_apl298217_jpeg.jpg?v=1787798935"},{"product_id":"apl847436","title":"TACO Marine Multi-Purpose 15° Portable Cleat, 9 in, For 1-5\/8 in Rod Holders","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F30-0861BSA-1 is a multi-purpose 15° portable cleat made for boats that need a temporary tie-off point without adding fixed hardware to the deck. It drops into a standard rod holder, giving you a movable cleat for dock lines, fenders, and washdown tasks when the existing cleats are not in the right place.\u003c\/p\u003e\u003cp\u003eThe cleat has a large S-shape form with a 9-inch cleat surface and accepts dock lines up to 3\/4 inch. Its 1-1\/2-inch diameter tube fits standard 1-5\/8-inch rod holders, so it can be moved from station to station and stowed when not in use.\u003c\/p\u003e\u003cp\u003eThis is a practical accessory for center consoles, fishing boats, cruisers, and other vessels with rod holders near the cockpit or gunwale. It helps keep dock lines and fenders together at one working point, which is useful during short stops, fueling, raft-ups, and docking in changing conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePortable cleat and fender holder in one piece for temporary line handling at a rod holder location.\u003c\/li\u003e\n\u003cli\u003eLarge S-shape 9-inch cleat surface for secure wraps with dock lines up to 3\/4 inch.\u003c\/li\u003e\n\u003cli\u003e1-1\/2-inch tube fits standard 1-5\/8-inch rod holders for quick placement and removal.\u003c\/li\u003e\n\u003cli\u003e15° portable cleat layout works well where a rod holder angle helps position the cleat for dockside use.\u003c\/li\u003e\n\u003cli\u003eLoop hole allows fenders to hang over the side from the same accessory used for a dock line.\u003c\/li\u003e\n\u003cli\u003eCan also hold a hose while washing the boat, keeping it off the deck and easier to manage.\u003c\/li\u003e\n\u003cli\u003eTwo-piece design helps with storage when the cleat is not being used.\u003c\/li\u003e\n\u003cli\u003eAdjustable height ring helps set the working height for different dock or tide conditions.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum finish matches many deck and cockpit hardware layouts.\u003c\/li\u003e\n\u003cli\u003eMesh bag helps the cleat dry after use and reduces scratching on deck or storage surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eNo drilling or permanent deck work is needed when the boat already has a compatible rod holder. Insert the tube into a 1-5\/8-inch rod holder, set the height ring as needed, and use the 9-inch cleat surface for the dock line. The cleat should be positioned so the line leads cleanly and does not chafe against the gunwale, rod holder rim, or nearby hardware.\u003c\/p\u003e\u003cp\u003eAs with any portable tie-off point, the rod holder and surrounding mounting structure need to be suitable for the load being applied. This accessory is best used for docking, fender placement, temporary line control, and similar day-to-day tasks rather than as a substitute for a permanently installed mooring cleat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cleat is useful when the boat’s fixed cleats are too far forward, too far aft, or already occupied. It gives anglers and cruisers a fast way to place a fender beside the hull while also controlling a dock line from the cockpit or gunwale area.\u003c\/p\u003e\u003cp\u003eIt also works well during washdowns, since the loop can hold a hose over the side instead of letting it drag across the deck. After use, the cleat can be removed, rinsed, dried, and stored in its mesh bag.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTACO Marine multi-purpose 15° portable cleat\u003c\/li\u003e\n\u003cli\u003eMesh storage and drying bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550729339126,"sku":"APL847436","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370330_apl847436_jpeg.jpg?v=1787799811"},{"product_id":"apl575137","title":"TACO Marine Quick Release Fender Lock Kit, For Fiberglass Boats, 316L Stainless Steel, High-Polished Finish, 1-11\/16 in Above Deck, 1 in Button, 7\/8 in Line Hole","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0200-1 is a quick release fender lock kit for fiberglass boats, made to keep fender lines secure and set at the length you use most often. It gives dock lines for fenders a fixed attachment point on deck, so fenders can be installed quickly when coming alongside a dock, rafting up, or tying off in a slip.\u003c\/p\u003e\u003cp\u003eThe kit pairs a locking Pull Pin with a deck-mounted Receiver. The Pull Pin uses a 1\" diameter push button and has a 7\/8\" diameter line hole for larger fender lines, while the Receiver includes a spring-loaded hole cover that closes the opening when the Pull Pin is removed. The assembly sits 1-11\/16\" above the deck and is made from Type-316L stainless steel with a high-polished finish.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eComplete quick release fender lock kit for fiberglass boats, with the locking Pull Pin and Receiver used together as one fender line attachment point.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction supports use in saltwater, washdown, and dockside conditions.\u003c\/li\u003e\n\u003cli\u003eHigh-polished finish gives the hardware a clean look on finished decks, gunwales, and cockpit areas.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded Receiver cover closes the deck opening when the Pull Pin is not installed.\u003c\/li\u003e\n\u003cli\u003e1\" diameter push button gives a wide contact point for releasing the Pull Pin by hand.\u003c\/li\u003e\n\u003cli\u003e7\/8\" diameter line hole accommodates larger fender lines used on many cruising, fishing, and dockside setups.\u003c\/li\u003e\n\u003cli\u003e1-11\/16\" overall height above deck keeps the fitting low while still leaving enough clearance for practical handling.\u003c\/li\u003e\n\u003cli\u003eBottom-fastening Receiver keeps the mounting arrangement clean from above.\u003c\/li\u003e\n\u003cli\u003eNylon ring washer separates dissimilar metals to help reduce galvanic corrosion risk at the mounting point.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis fender lock is intended for fiberglass boat installations where a permanent Receiver can be mounted from the underside. The bottom-fastening layout is useful where the finished deck surface should stay clean, with the visible hardware limited to the polished Receiver and removable Pull Pin.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm that the mounting location has enough underside access for fastening and enough clearance for the Receiver. Common locations include gunwales, cockpit coamings, and other reinforced fiberglass areas where fenders are routinely placed and removed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOnce installed, the fender line can remain set to the preferred length on the Pull Pin. During docking, the Pull Pin drops into the Receiver to place the fender at the same height each time, which helps reduce line adjustment when arriving at a marina, fuel dock, restaurant dock, or raft-up.\u003c\/p\u003e\u003cp\u003eThis kit is a practical match for boat owners who want repeatable fender placement without leaving loose fender lines tied to cleats or rails. It works especially well on boats where clean deck hardware, fast fender deployment, and tidy storage matter during regular dockside use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLocking Pull Pin\u003c\/li\u003e\n\u003cli\u003eReceiver\u003c\/li\u003e\n\u003cli\u003eNylon ring washer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550730027254,"sku":"APL575137","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370600_apl575137_jpeg.jpg?v=1787799862"},{"product_id":"apl146173","title":"TACO Marine Grand Slam 850 Electric VHF Antenna Mount, 12V, 1-14 Thread","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-850 is an electric VHF antenna mount for hardtop installations where the antenna needs to raise and lower from the helm instead of being handled by hand on deck. It accepts standard 1 in.-14 male-thread VHF antenna shafts up to 8 ft and runs on a 12V DC power supply for lift and descent.\u003c\/p\u003e\u003cp\u003eThis mount is useful on center consoles, pilothouse boats, and other hardtop-equipped vessels where bridge clearance, trailering, storage, or low overhead structures make antenna positioning part of normal operation. The fully electric layout keeps wiring hidden inside the hardtop, and the surface-mount design does not require under-mount clearance.\u003c\/p\u003e\u003cp\u003eThe body is machined and anodized aluminum with a light brushed finish, with a threaded shaft for controlled lift and descent. It weighs 2.1 lb, includes a 6 in. lead of 20-gauge wire from the base, and accepts a 3A fuse in the main positive 12V DC power feed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eElectric raise and lower operation lets the VHF antenna be adjusted from the helm.\u003c\/li\u003e\n\u003cli\u003eFits standard 1 in.-14 male-thread VHF antenna shafts up to 8 ft.\u003c\/li\u003e\n\u003cli\u003eSurface-mount installation works without under-mount clearance, which helps on hardtops with limited access below.\u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum body with a light brushed finish for exposed marine installations.\u003c\/li\u003e\n\u003cli\u003eThreaded shaft supports steady lift and descent rather than a loose manual swing.\u003c\/li\u003e\n\u003cli\u003eBreakaway pin allows manual operation when electric operation is not available.\u003c\/li\u003e\n\u003cli\u003eIncludes a 6 in. lead of 20-gauge wire from the base for the 12V DC connection.\u003c\/li\u003e\n\u003cli\u003eAccepts a 3A fuse in the main positive 12V DC power feed, with the fuse supplied separately.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GS-850 mounts on the surface of the hardtop, so it is well suited to installations where there is little or no room below the mounting surface. Routing the wiring inside the hardtop keeps the deck area cleaner and helps reduce exposed wire runs around electronics boxes and helm stations.\u003c\/p\u003e\u003cp\u003eThe mount requires 12V DC power and a DPDT on-off-on switch for control. The main positive feed should be protected with a 3A fuse, supplied separately. For best results, the antenna location should allow full antenna movement without interference from outriggers, radar arrays, anchor lights, canvas, or rocket launchers.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for VHF antennas with a standard 1 in.-14 threaded base and a maximum antenna length of 8 ft. It pairs naturally with hardtop and T-top installations where lowering the antenna helps with bridge clearance, dry-stack storage, trailering, or maintenance access.\u003c\/p\u003e\u003cp\u003eA matching backing plate and 6 degree wedge plate are available separately for installations that need extra support or angle correction on a curved or sloped top. Mounting hardware, backing support, and sealant should be selected to suit the hardtop construction and the load created by the antenna in rough water and wind.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGrand Slam 850 electric VHF antenna mount\u003c\/li\u003e\n\u003cli\u003e6 in. lead of 20-gauge wire from the base\u003c\/li\u003e\n\u003cli\u003eDrill template\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550731337974,"sku":"APL146173","price":749.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370518_apl146173_jpeg.jpg?v=1787799958"},{"product_id":"apl244858","title":"TACO Marine Center Rigging Kit, For Up to 25' Outrigger, 50' UV-Protected Dacron Line","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine RK-0001PCB is a premium center rigging kit for setting up one center outrigger pole up to 25 feet. It gives offshore and coastal anglers the core hardware needed to run a long bait from a center rigger without piecing together clips, swivels, line, and small installation parts separately.\u003c\/p\u003e\u003cp\u003eThe kit includes 50 feet of UV-protected Dacron line, release clips, a shock cord with a stainless steel snap, a 1-1\/4 inch float and pulley, swivels, crimps, a stainless steel pad eye, screws, and a marine mesh storage bag. It is a practical fit for boats adding or refreshing a center outrigger setup for trolling spreads where clean line control and organized rigging matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRigs one center outrigger pole up to 25 feet for offshore trolling and bait presentation.\u003c\/li\u003e\n\u003cli\u003eIncludes 50 feet of UV-protected Dacron line for the center rigger setup.\u003c\/li\u003e\n\u003cli\u003ePremium kit configuration includes a 1-1\/4 inch float and pulley for the rigging line.\u003c\/li\u003e\n\u003cli\u003eRelease clips, barrel swivel, snap swivels, and crimps support a complete outrigger rigging layout.\u003c\/li\u003e\n\u003cli\u003eShock cord with stainless steel snap helps manage tension in the outrigger line.\u003c\/li\u003e\n\u003cli\u003eStainless steel pad eye and screws are included for mounting the rigging attachment point.\u003c\/li\u003e\n\u003cli\u003eMarine mesh bag keeps the small parts together and lets wet gear drain after use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis kit is meant for a center rigger installation on fishing boats with an outrigger pole up to 25 feet. The included pad eye and screws provide the deck or hardtop attachment point, while the pulley, float, Dacron line, shock cord, swivels, crimps, and release clips make up the working rigging system.\u003c\/p\u003e\u003cp\u003eDuring installation, confirm the routing path for the outrigger line, the attachment point location, and the release clip position before crimping the final setup. On boats that see salt spray, rinse the rigging hardware with fresh water after use and check clips, crimps, swivels, and line wear as part of regular tackle prep.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThe kit suits anglers rigging a center rigger for trolling long baits behind sportfishing boats, center consoles, and offshore-capable fishing boats. It is especially useful when a clean, organized rigging package is preferred over sourcing each small part separately.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRelease clips\u003c\/li\u003e\n\u003cli\u003eShock cord with stainless steel snap\u003c\/li\u003e\n\u003cli\u003e1-1\/4 inch float and pulley\u003c\/li\u003e\n\u003cli\u003eBarrel swivel\u003c\/li\u003e\n\u003cli\u003eSnap swivels\u003c\/li\u003e\n\u003cli\u003eCrimps\u003c\/li\u003e\n\u003cli\u003eStainless steel pad eye\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003e50 feet of UV-protected Dacron line\u003c\/li\u003e\n\u003cli\u003eMarine mesh storage bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550731501814,"sku":"APL244858","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323538_apl244858.webp?v=1787799971"},{"product_id":"apl393558","title":"TACO Marine ShadeFin Fixed Rod Holder Mount, For Standard Rod Holders, Type-304 Stainless Steel, Nylon Sleeve, Locking Knob","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-5 is a fixed rod holder mount for attaching a ShadeFin shade system to a compatible boat rod holder. It is made from high-polished Type-304 stainless steel and uses a locking knob, nylon sleeve, self-aligning notch, and pin-locking hole to help keep the ShadeFin connection secure while the boat is at rest or underway in normal operating conditions.\u003c\/p\u003e\u003cp\u003eThis mount is mainly suited for firmly welded T-top rod holders. It can also be used with a gunnel rod holder when the proper adapter is used, or with the Telescopic Rod Holder Accessory when that separate accessory is part of the setup. For owners adding portable shade to a center console, fishing boat, or cruiser, it gives the ShadeFin a fixed mounting point without adding a permanent deck or hardtop bracket.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed mount for TACO Marine ShadeFin systems using compatible rod holder locations on board\u003c\/li\u003e\n\u003cli\u003eFits standard T-top rod holders when the rod holder is firmly welded and able to accept the mount\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type-304 stainless steel construction for a clean finish in exposed marine spaces\u003c\/li\u003e\n\u003cli\u003eLocking knob helps secure the mount in the rod holder once the butt end is seated\u003c\/li\u003e\n\u003cli\u003eNylon sleeve helps reduce movement when the rod holder opening is larger than the mount shaft\u003c\/li\u003e\n\u003cli\u003eGimbal-slot butt end mates with the rod holder pin for proper seating\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help guide and retain the ShadeFin mounting post\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe mount is intended for use with ShadeFin and a suitable rod holder location. In a T-top installation, the rod holder should be firmly welded before the ShadeFin is mounted. For gunnel rod holder installations, the correct adapter is required so the mount is seated properly and the threads are not damaged.\u003c\/p\u003e\u003cp\u003eThe fit depends on the rod holder opening, the internal gimbal pin, and the ability to tighten the locking knob at the bottom of the mount. The included nylon sleeve is useful where the rod holder opening has extra clearance around the mount shaft, helping take up space and reduce unwanted movement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation starts by removing the locking knob, placing the beveled nylon sleeve on the mount leg, and sliding the gimbal butt end into the rod holder so it engages with the rod holder pin. Once the sleeve is seated, the locking knob is tightened until the mount has no wiggle room.\u003c\/p\u003e\u003cp\u003eAfter the mount is secured in the rod holder, the ShadeFin mounting post slides into the open end of the mount. The alignment pin guides the post into position, and the locking pin should pass through the locking hole before the ShadeFin is opened.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount is a practical match for boaters who already have a suitable rod holder and want a removable shade position without drilling a new permanent mount into the deck, gunwale, or hardtop. It works well for adding shade over a cockpit, helm area, fishing station, or lounging space where the ShadeFin location lines up with an existing rod holder.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mount with fresh water and wipe away salt around the locking knob, sleeve, and pin-locking area. Keeping the sleeve clean and checking that the locking knob turns freely will make setup easier and help the mount seat properly each time it is used.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550766137590,"sku":"APL393558","price":294.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370556_apl393558_jpeg.jpg?v=1787800660"},{"product_id":"apl603537","title":"TACO Marine 4-Rod Deluxe Poly Rod Rack, UV-Stabilized Polyethylene, 18 in, 1-3\/4 in Rod Holders","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-064 Series is a 4-rod deluxe poly rod rack for adding organized rod and tool storage to a fishing boat, center console, bay boat, skiff, or dockside rigging area. It holds four rods in a compact rack format and is made from UV-stabilized polyethylene, so it suits exposed marine locations where sun, spray, and regular washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eThis rack gives anglers a fixed place for rods, pliers, and a knife without taking up gunnel or cockpit space needed for fishing. The flared rod openings help when loading and removing rods, while the slotted rod holders help keep most conventional and spinning outfits in place during normal movement on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds four fishing rods in one rack, helping keep the cockpit, leaning post area, cabin bulkhead, or console side more organized.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized polyethylene construction suits marine use where the rack may see sun, salt spray, and frequent cleaning.\u003c\/li\u003e\n\u003cli\u003eFlared rod holder openings make rod handling easier when rods are being stored or retrieved quickly.\u003c\/li\u003e\n\u003cli\u003eSlotted holders help secure most conventional and spinning outfits without adding a complicated locking mechanism.\u003c\/li\u003e\n\u003cli\u003eIntegrated storage slots give pliers and a knife a dedicated place near the rods.\u003c\/li\u003e\n\u003cli\u003eLightweight construction keeps the rack easy to position on flat mounting surfaces around the boat.\u003c\/li\u003e\n\u003cli\u003eAvailable in Black and White to match common cockpit, console, and storage-area finishes.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis 4-rod poly rack is offered in two color configurations. The color is the visible difference between the variants, while the 4-rod layout, UV-stabilized polyethylene construction, flared rod holder design, slotted rod holders, and integrated knife and plier storage remain consistent across the series.\u003c\/p\u003e\u003cp\u003eThe black version can blend well with darker consoles, trim, powder-coated hardware, or utility areas where scuffs are less visible. The white version is a common match for white fiberglass interiors, cockpit liners, and clean deck layouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP03-064B: Color Black. This version gives the rack a darker look that works well near black trim, electronics areas, leaning posts, or utility-style rigging zones.\u003c\/li\u003e\n\u003cli\u003eP03-064W: Color White. This version suits boats with white fiberglass surfaces, light cockpit interiors, or storage areas where a bright, clean visual match is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the rack where rods can be reached without blocking walkways, hatches, engine access, or casting space. Common locations include a console side, cockpit bulkhead, cabin wall, tackle station, dock box area, or another flat surface with enough clearance for rod handles and reel bodies.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the backside of the mounting surface for wiring, plumbing, fuel lines, and structural members. Use marine-appropriate fasteners for the surface material and make sure the rack sits flat so rods slide in and out without binding.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rack is a practical fit for anglers who want rods staged and tools close by during coastal fishing, inshore trips, offshore runs, or dockside preparation. It is especially useful when loose rods would otherwise sit across seats, decks, or leaning posts where they can get stepped on or knocked around.\u003c\/p\u003e\u003cp\u003eThe simple poly construction also makes it easy to rinse after use. A freshwater washdown after saltwater trips helps keep the rack, rod handles, pliers, and nearby hardware cleaner between outings.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"White","offer_id":51550813225206,"sku":"APL603537-V4","price":109.99,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":51550813257974,"sku":"APL603537-V5","price":106.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371130_apl603537_jpeg.jpg?v=1787801703"},{"product_id":"apl245241","title":"TACO Marine Caladesi Smooth Bucket Seat, 22 in x 23 in x 26 in, Adjustable Bolster, Integrated Seat Suspension, Marine-Grade Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Caladesi Bucket Seat is a smooth marine bucket seat for helm seating on pilot house boats, pontoons, dual consoles, and similar layouts where comfort, support, and pedestal fit matter. Each seat measures 23\" wide, 26\" deep, and 22\" high, giving buyers clear dimensions to check against the helm, console spacing, leaning area, and existing seat base.\u003c\/p\u003e\u003cp\u003eThis seat uses an integrated suspension system with a stainless-steel coil-spring grid in the seat bottom, along with plush cushioning, form-fitting sides, and an adjustable bolster for seated operation or standing at the helm. The back cutout adds airflow through the seat, which is useful during long days in exposed cockpits or warm cabin areas.\u003c\/p\u003e\u003cp\u003eThe Caladesi Bucket Seat is built with a rotomolded shell, a reinforced seat bottom, marine vinyl treated with anti-microbial and UV stabilizers, and anti-bacterial foam padding. It mounts to a standard pedestal with a 5.25\" 4-hole pattern and meets the ABYC H-31 impact test.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e23\" width, 26\" depth, and 22\" height help confirm helm clearance before installation.\u003c\/li\u003e\n\u003cli\u003eIntegrated seat suspension uses a stainless-steel coil-spring grid in the seat bottom to reduce harsh movement while underway.\u003c\/li\u003e\n\u003cli\u003eAdjustable bolster supports both seated steering and stand-up helm operation.\u003c\/li\u003e\n\u003cli\u003eRotomolded seat shell with a reinforced seat bottom adds structure for marine seating applications.\u003c\/li\u003e\n\u003cli\u003eMarine vinyl is treated with anti-microbial and UV stabilizers for use in sun, moisture, and regular cockpit exposure.\u003c\/li\u003e\n\u003cli\u003eAnti-bacterial foam padding helps resist mold and mildew while keeping the seat supportive during longer trips.\u003c\/li\u003e\n\u003cli\u003eBack cutout improves airflow through the seat and gives the helm area a sport-style profile.\u003c\/li\u003e\n\u003cli\u003eMounts to a standard pedestal with a 5.25\" 4-hole pattern.\u003c\/li\u003e\n\u003cli\u003eMeets the ABYC H-31 impact test for marine seating.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe Caladesi Bucket Seat is offered in four color configurations, all using the same smooth bucket seat format.\u003c\/p\u003e\u003cp\u003eThe color combination is the visible difference between variants. The listed dimensions, standard pedestal mounting pattern, adjustable bolster, integrated suspension, vinyl treatment, foam padding, ABYC H-31 impact test rating, and 3-year limited warranty remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBA2-25WHT: Color White. This option gives the helm a clean, classic marine look and pairs easily with light upholstery packages.\u003c\/li\u003e\n\u003cli\u003eBA2-25WHT-BLK: Color Black \u0026amp; White. The black and white layout adds contrast while keeping a bright seating surface in the helm area.\u003c\/li\u003e\n\u003cli\u003eBA2-25WHT-GRY: Color Light Gray \u0026amp; White. The light gray and white layout suits boats with softer neutral upholstery or gray deck accents.\u003c\/li\u003e\n\u003cli\u003eBA2-25GRY-BLK: Color Black \u0026amp; Light Gray. The black and light gray layout gives the seat a darker helm appearance while still keeping a neutral marine finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check the available space around the wheel, throttle, console face, and any side panels or arm rests. The 23\" width and 26\" depth should be compared with the existing helm footprint, especially on dual console boats and compact pilot house layouts where seat swing, bolster use, and walkaround clearance are limited.\u003c\/p\u003e\u003cp\u003eThe pedestal interface uses a 5.25\" 4-hole pattern, so it is meant for standard marine pedestal mounting rather than a custom seat base with an unknown hole layout. Confirm the bolt pattern, pedestal rating, and deck structure before installation, and use appropriate marine hardware for the mounting surface.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis seat fits boats where the operator may switch between sitting and standing while steering, such as coastal fishing boats, pontoons, pilot house boats, and family cruisers. The adjustable bolster and wrap-around shape are useful at the helm, while the treated vinyl and foam construction suit regular exposure to sun, spray, and humid storage conditions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and dirt from the vinyl with fresh water after use, then clean with a mild marine upholstery cleaner as needed. Avoid harsh solvents or abrasive pads, since they can shorten the life of the vinyl surface and its protective treatment.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black \u0026 Light Gray","offer_id":51550823842038,"sku":"APL245241-V0","price":1474.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550823874806,"sku":"APL245241-V1","price":1474.99,"currency_code":"USD","in_stock":false},{"title":"Black \u0026 White","offer_id":51550823907574,"sku":"APL245241-V2","price":1404.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327913_apl245241.webp?v=1787802027"},{"product_id":"apl245242","title":"TACO Marine Anclote Bucket Seat, Integrated Seat Suspension, Adjustable Bolster, 5.25 in 4-Hole Pedestal Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Anclote Bucket Seat is a helm bucket seat for pilot house boats, pontoons, dual consoles, and other helm layouts where comfort, support, and stand-up control matter during a day on the water. The seat measures 25.5\" wide x 27\" deep x 24.75\" high and mounts to a standard pedestal with a 5.25\" 4-hole pattern, giving installers a clear fit reference before replacing or upgrading a helm seat.\u003c\/p\u003e\u003cp\u003eThis bucket seat uses a wrap-around body shape with form-fitting sides, an adjustable bolster, and integrated seat suspension to help reduce fatigue at the helm. The construction includes a rotomolded seat shell with a reinforced seat bottom, high-density anti-bacterial foam padding, and marine vinyl treated with anti-microbial protection and UV stabilizers for regular use in sun, spray, and changing marine conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable bolster lets the operator sit or raise the bolster for stand-up steering at the helm.\u003c\/li\u003e\n\u003cli\u003eIntegrated seat suspension helps soften motion during longer runs, choppy water, or repeated wake impact.\u003c\/li\u003e\n\u003cli\u003eRotomolded shell with a reinforced seat bottom adds structure for marine helm seating installations.\u003c\/li\u003e\n\u003cli\u003eMarine vinyl is treated with anti-microbial protection and UV stabilizers for cockpit and deck environments.\u003c\/li\u003e\n\u003cli\u003eHigh-density anti-bacterial foam padding supports long days underway while helping resist mold and mildew.\u003c\/li\u003e\n\u003cli\u003eMounts to standard pedestals with a 5.25\" 4-hole pattern for straightforward helm seat replacement.\u003c\/li\u003e\n\u003cli\u003eMeets the ABYC H-31 impact test for marine seating applications.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis bucket seat range is offered in multiple color and upholstery style configurations. The listed Diamond versions use the Anclote styling with diamond quilting, while the Smooth White\/Grey version uses the Caladesi smooth upholstery style with a sporty back cutout.\u003c\/p\u003e\u003cp\u003eAcross the validated bucket seat configurations, the 25.5\" x 27\" x 24.75\" size, adjustable bolster, integrated suspension, marine vinyl treatment, and 5.25\" pedestal mounting pattern remain consistent.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBA1-25WHT: White color with Diamond style. This is the cleanest single-color Anclote look and fits helm areas where the seat needs to match a bright white cockpit or console interior.\u003c\/li\u003e\n\u003cli\u003eBA1-25WHT-BLK: White\/Black color with Diamond style. The black accent gives the seat more visual contrast while keeping the diamond-stitched Anclote finish.\u003c\/li\u003e\n\u003cli\u003eBA1-25WHT-GRY: White\/Grey color with Diamond style. The grey accent softens the look and pairs well with many modern console, cushion, and deck color schemes.\u003c\/li\u003e\n\u003cli\u003eBA1-25GRY-BLK: Grey\/Black color with Diamond style. This darker combination is useful where the helm seating needs a more subdued appearance than all-white upholstery.\u003c\/li\u003e\n\u003cli\u003eBA225WHT-GRY: White\/Grey color with Smooth style. This configuration uses smooth Caladesi styling rather than diamond quilting, giving the seat a cleaner upholstery surface and a different visual character at the helm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm the pedestal or slide uses the 5.25\" 4-hole mounting pattern and that the helm has enough clearance for the 25.5\" width and 27\" depth. This is especially important on compact dual consoles, narrow pilot house layouts, and helm stations where the seat must rotate, slide, or clear nearby coaming panels.\u003c\/p\u003e\u003cp\u003eThe adjustable bolster is useful on boats where the operator alternates between seated cruising and a raised driving position for docking, tight channels, or rougher water. For the best result, pair the seat with a pedestal, slide, or mounting base rated for the vessel and intended helm use.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis seat is a good match for boat owners replacing a worn helm bucket seat or upgrading a cockpit where support, bolster function, and marine-ready upholstery are more important than a basic cushion. It suits fishing boats, pontoons, dual consoles, and pilot house boats that see regular sun exposure, spray, and passengers moving around the helm area.\u003c\/p\u003e\u003cp\u003eThe vinyl and foam treatments help with real-world marine care, but the seat should still be rinsed after saltwater use and cleaned with products safe for marine vinyl. Keeping the upholstery free of salt, sunscreen residue, and trapped moisture will help preserve the surface and stitching over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"White \/ Diamond","offer_id":51550838980854,"sku":"APL245242-V1","price":1444.99,"currency_code":"USD","in_stock":false},{"title":"Grey\/Black \/ Diamond","offer_id":51550839013622,"sku":"APL245242-V4","price":1444.99,"currency_code":"USD","in_stock":false},{"title":"White\/Black \/ Diamond","offer_id":51550839046390,"sku":"APL245242-V2","price":1444.99,"currency_code":"USD","in_stock":false},{"title":"White\/Grey \/ Diamond","offer_id":51550839079158,"sku":"APL245242-V3","price":1444.99,"currency_code":"USD","in_stock":false},{"title":"White\/Grey \/ Smooth","offer_id":51550839111926,"sku":"APL245242-V5","price":1399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325388_apl245242.webp?v=1787802302"},{"product_id":"apl298474","title":"TACO Marine Low Profile Manual Seat Slide, 11-1\/8 in x 36 in, For 41-54 in Seats, 3-5\/8 in Travel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine M20-3611 is a low-profile adjustable seat slide for helm chairs and bench seats where fore-and-aft position matters at the console. It is sized as an 11-1\/8\" x 36\" manual slide and is made for seats from 41\" to 54\" wide, giving the operator a practical way to fine-tune reach to the wheel, throttle, displays, and footrest.\u003c\/p\u003e\u003cp\u003eThis slide has five equally spaced locking positions with up to 3-5\/8\" of travel. The front activation paddle moves with the seat, so the release remains accessible in every position, which is useful on center consoles, pilothouses, and helm benches where several people may use the same seat during a day on the water.\u003c\/p\u003e\u003cp\u003eA precision-machined 6000-series aluminum chassis, self-lubricated polymer glides, and a double pin positive side lock give the assembly the support and controlled movement needed for marine seating. The slide meets ABYC H31 testing standards and is listed with a 1.85\" height, 36\" width, 12.43\" length, and 22.36 lb weight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual seat slide for helm chairs and benches from 41\" to 54\" wide.\u003c\/li\u003e\n\u003cli\u003eFive equally spaced adjustment positions with up to 3-5\/8\" of travel.\u003c\/li\u003e\n\u003cli\u003eFront activation paddle slides with the seat, keeping the release within reach.\u003c\/li\u003e\n\u003cli\u003ePrecision-machined 6000-series aluminum chassis for support in marine seating applications.\u003c\/li\u003e\n\u003cli\u003eHigh-strength polymer glides are self-lubricated for smooth movement and reduced rattle.\u003c\/li\u003e\n\u003cli\u003eDouble pin positive side lock helps hold the selected seat position securely.\u003c\/li\u003e\n\u003cli\u003eUniversal mounting bolt pattern supports installation on box-style seat bases.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC H31 testing standards for boat seating applications.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis slide is intended for larger helm chairs and bench seating, especially layouts in the 41\" to 54\" width range. The recommended seat length or depth is 12\" to 14\", which helps keep the seat supported properly through the slide travel.\u003c\/p\u003e\u003cp\u003eThe universal mounting bolt pattern is meant for box applications, making it a practical retrofit or build-out option for helm boxes, leaning post seating, and bench bases where a manual sliding function is needed. Before installation, confirm the base structure, fastener pattern, seat width, and available clearance in front of and behind the seat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eAt the helm, a small adjustment can make a big difference in comfort and control. The 3-5\/8\" travel range lets the operator move closer for tighter throttle and steering control, then shift back when seated for longer runs or dockside use.\u003c\/p\u003e\u003cp\u003eThis seat slide is a strong match for boat owners, builders, and refit shops working with wide helm benches or chairs that need simple manual adjustment without adding electrical controls or extra system integration.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eLike any moving hardware on a boat, the slide should be kept clean and checked periodically for debris, loose mounting hardware, and smooth lock engagement. A fresh-water rinse after saltwater use helps remove salt and grit from the slide area, especially around the paddle, glides, and locking mechanism.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550839374070,"sku":"APL298474","price":1104.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370614_apl298474_jpeg.jpg?v=1787802397"},{"product_id":"apl813734","title":"TACO Marine ShadeFin Mini Deck Mount, Backing Plate, Powder-Coated 6061 Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-4000-8 is a ShadeFin Mini deck mount with backing plate for a permanent mounting point on a boat deck, console top, or other flat surface. It gives the ShadeFin Mini a fixed base while still allowing the shade unit to be removed and stowed when the boat is not in use or when the deck needs to stay clear.\u003c\/p\u003e\u003cp\u003eThe mount is made from powder-coated 6061 aluminum alloy in a misty silver finish, with a backing plate to help support the installation from below the mounting surface. An injection-molded nylon cap is included so the mount can be covered after the ShadeFin Mini is removed, which helps keep the installation tidy on exposed deck and console areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePermanent deck-style mounting base for the TACO ShadeFin Mini on flat marine surfaces.\u003c\/li\u003e\n\u003cli\u003eWorks well on boat decks, console tops, and similar flat mounting locations where a fixed shade position is preferred.\u003c\/li\u003e\n\u003cli\u003eShadeFin Mini can be removed from the mount and stowed, leaving the base installed on the boat.\u003c\/li\u003e\n\u003cli\u003ePowder-coated 6061 aluminum alloy construction with a misty silver finish for use in exposed marine areas.\u003c\/li\u003e\n\u003cli\u003eBacking plate and mounting hardware are included for a more complete installation.\u003c\/li\u003e\n\u003cli\u003eInjection-molded nylon cap covers the mount when the shade is not installed.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is for flat mounting surfaces where access to the underside is available for the backing plate. Before drilling, check the deck or console structure, nearby wiring, liner clearance, and the swing of the ShadeFin Mini so the shade can be positioned where it will be useful without interfering with helm controls, hatches, or walkways.\u003c\/p\u003e\u003cp\u003eThe included six mounting screws and backing plate help create a secure attachment point, but the final installation should match the thickness and condition of the mounting surface. On cored decks or console tops, seal all drilled holes carefully to help keep water out of the laminate or core material.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis deck mount is a good fit for boaters who want a repeatable ShadeFin Mini location rather than a temporary clamp or rail mount. It suits helm areas, small seating zones, casting areas, and other flat surfaces where quick shade setup matters during fishing, cruising, or time at anchor.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eShadeFin Mini deck mount\u003c\/li\u003e\n\u003cli\u003eBacking plate\u003c\/li\u003e\n\u003cli\u003eSix mounting screws\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInjection-molded nylon cap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550875353334,"sku":"APL813734","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715677_apl813734.jpg?v=1787803219"},{"product_id":"apl711990","title":"TACO Marine Grand Slam 380-LE Outrigger Mount Pair, For 1-1\/2 in Outriggers, 25-40 ft Boats","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-380-LE is a Limited Edition Grand Slam 380-LE outrigger mount set for 1-1\/2 inch outriggers, pairing the GS-390 body with the GS-380 arm for sportfishing boats that need outrigger control from below the top. It is built for boats in the 25 ft to 40 ft range and lets the crew handle both horizontal rotation and vertical lift from the deck, which matters when seas are moving and climbing onto a hardtop is not practical.\u003c\/p\u003e\u003cp\u003eThe outward rotation handle uses detents every 22.5 degrees to help control movement, while the lifting crank handle folds flush into the base when not in use. Vertical lift reaches up to 45 degrees, and the 30 degree offset handle gives better hand clearance around the top and mounting area.\u003c\/p\u003e\u003cp\u003eConstruction uses cast stainless steel and machined aluminum, giving the mount the strength and corrosion resistance needed for saltwater fishing use. The locking head helps hold the outrigger position once set, making this a practical upgrade for offshore trolling, coastal sportfishing, and boats where safe deck-level outrigger adjustment is a priority.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLimited Edition Grand Slam 380-LE configuration with GS-390 body and GS-380 arm\u003c\/li\u003e\n\u003cli\u003eMade for 1-1\/2 inch outriggers on sportfishing boats from 25 ft to 40 ft\u003c\/li\u003e\n\u003cli\u003eHorizontal rotation can be handled from below the top, reducing the need to access the hardtop during setup\u003c\/li\u003e\n\u003cli\u003eVertical lift reaches up to 45 degrees from below the top for easier outrigger deployment and adjustment\u003c\/li\u003e\n\u003cli\u003eOutward rotation handle has detents every 22.5 degrees to help prevent uncontrolled movement\u003c\/li\u003e\n\u003cli\u003e30 degree offset handle gives added hand clearance while operating the mount\u003c\/li\u003e\n\u003cli\u003eFolding lifting crank sits flush into the base for a cleaner deck and top profile\u003c\/li\u003e\n\u003cli\u003eCast stainless steel and machined aluminum construction stands up to marine use and saltwater exposure\u003c\/li\u003e\n\u003cli\u003eLocking head helps keep the outrigger in the selected position while trolling\u003c\/li\u003e\n\u003cli\u003ePatent US7114283 with a 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis mount is intended for top-mounted outrigger installations where the operator wants control from the deck rather than from above the hardtop. Confirm that the top structure can support the load, that there is room for the handle swing and crank operation, and that the selected outrigger poles match the 1-1\/2 inch requirement.\u003c\/p\u003e\u003cp\u003eBecause the mount is sold as a pair, it suits symmetrical port and starboard installations. Careful layout before drilling is important so the handles are comfortable to reach, the poles clear antennas and other top-mounted hardware, and the outriggers can rotate and lift without interference.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis set is a strong fit for center consoles and express-style fishing boats where crews deploy outriggers often and need adjustments that can be made quickly from the deck. It is especially useful for offshore trolling spreads, live-bait fishing, and coastal runs where conditions can change before or during deployment.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the mounts with fresh water after saltwater use, especially around the handles, locking areas, and moving parts. Periodic inspection of fasteners, mounting surfaces, and the locking head helps keep the system operating smoothly through regular fishing seasons.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of Grand Slam 380-LE outrigger mounts\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550879547638,"sku":"APL711990","price":3899.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715643_apl711990.jpg?v=1787803369"},{"product_id":"apl333497","title":"TACO Marine Weather Seal Tape, 10 ft, 7\/32 in x 3\/8 in, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-1333B10-1 is a black weather seal tape for sealing small marine access points where water, vibration, and sun exposure can shorten the life of lids, covers, and compartments. It measures 10 ft long, 1\/4 in high, and 3\/8 in wide, making it a practical fit for livewells, exterior doors, instrument covers, and electronic boxes.\u003c\/p\u003e\u003cp\u003eThis seal uses a synthetic rubber compound with closed-cell sponge construction, so it helps limit water absorption while cushioning contact surfaces. The black profile keeps the installation low-profile on many deck, cockpit, console, and compartment areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 ft length with a 1\/4 in height and 3\/8 in width for compact sealing jobs around lids, covers, and small access points.\u003c\/li\u003e\n\u003cli\u003eBlack synthetic rubber construction helps resist water absorption, sunlight damage, and temperature extremes in marine environments.\u003c\/li\u003e\n\u003cli\u003eClosed-cell sponge rubber helps cushion contact surfaces while reducing shock and vibration.\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive backing supports a cleaner installation without separate fasteners.\u003c\/li\u003e\n\u003cli\u003eUseful for livewells, exterior doors, instrument covers, and electronic boxes where a tighter seal can help protect the surrounding area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFor the best bond, the mounting surface should be clean, dry, and free of old adhesive, salt, wax, oil, or loose material before the backing is applied. A flat, continuous contact path helps the tape compress evenly when the lid, door, or cover is closed.\u003c\/p\u003e\u003cp\u003eThe 1\/4 in profile should be checked against the available gap before installation. Too little clearance can make a hatch or cover hard to close, while too much clearance may prevent the seal from compressing enough to do its job.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis weather seal is a good match for boat owners replacing worn gasket material on livewell lids, console doors, instrument covers, and small electronics enclosures. It is especially useful in areas exposed to spray, washdowns, UV, and vibration from normal running conditions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the seal periodically for compression set, peeling edges, cracking, or contamination from fuel, cleaners, or deck residue. When the seal no longer rebounds or the adhesive begins to lift, replacement helps restore a cleaner closure and better surface contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550891147510,"sku":"APL333497","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323587_apl333497_jpeg.jpg?v=1787803738"},{"product_id":"apl851149","title":"TACO Marine Premium Outrigger Release Clips, Stainless Steel\/PVC, Stainless Steel Spring, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine COK-0001T-2 is a pair of premium outrigger release clips for trolling spreads that need adjustable line tension and dependable release control. Each clip uses stainless steel and PVC construction, with a stainless steel adjustment spring that lets the crew fine-tune release pressure from light to heavy duty setups.\u003c\/p\u003e\u003cp\u003eThese clips suit offshore fishing boats, center consoles, sportfishers, and other vessels running outrigger halyards where bait position and release feel matter. The compact 4-1\/2\" length, 1-1\/4\" width, and 3\/4\" height help them fit cleanly into common outrigger rigging without adding bulky hardware at the release point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair for rigging two outrigger release points or replacing both clips in a matching setup.\u003c\/li\u003e\n\u003cli\u003eStainless steel and PVC construction supports use around saltwater spray and regular deck washdowns.\u003c\/li\u003e\n\u003cli\u003eStainless steel adjustment spring lets the crew tune release pressure for different baits, sea conditions, and target species.\u003c\/li\u003e\n\u003cli\u003eMicro-adjusting release pressure helps reduce false releases while still allowing a clean strike release when properly set.\u003c\/li\u003e\n\u003cli\u003eRated for light to heavy duty fishing applications, making it useful across a range of trolling spreads.\u003c\/li\u003e\n\u003cli\u003eBacked by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall these clips as part of the outrigger halyard or tag line arrangement, then set the spring tension to match the lure, bait, line class, and sea state. Start with lighter tension when running smaller baits or calm-water spreads, then increase tension when heavier tackle or rougher offshore conditions call for more holding power.\u003c\/p\u003e\u003cp\u003eBefore running, check that each clip opens and closes smoothly and that the fishing line sits cleanly in the release point. Rinse the clips with fresh water after saltwater use and inspect the spring and contact points during regular rigging checks.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis pair is a practical match for anglers who want more control over outrigger release pressure without replacing the full rigging system. It works well for crews that adjust spreads often, move between light and heavier trolling setups, or need replacement release clips that can handle frequent offshore use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e2 premium outrigger release clips\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550922211574,"sku":"APL851149","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370338_apl851149_jpeg.jpg?v=1787804569"},{"product_id":"apl810027","title":"TACO Marine Carbon Fiber Twist \u0026 Lock Tele-Outrigger Poles, For GS-500 Mounts, 1-1\/2 in, Type 316L SS Rings, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Carbon Fiber Twist \u0026amp; Lock Tele-Outrigger pole range is a pair of telescoping carbon fiber outrigger poles for offshore trolling setups where strength, line control, and quick base attachment matter. These black poles use a Twist \u0026amp; Lock butt design, so they attach to compatible TACO outrigger mounts without lining up a separate pin or bolt hole.\u003c\/p\u003e\u003cp\u003eThe range includes 20' and 24' configurations, both with a 1-1\/2\" diameter and black carbon fiber construction with a clear UV-resistant coating. The 20' version retracts to less than 8' and the 24' version retracts to less than 9', which helps with bridge clearance, storage, and trailering after a run offshore.\u003c\/p\u003e\u003cp\u003eStainless-steel Type-316L swivel rings, anodized aluminum collars, and a triple outrigger line layout make these poles suited to mono or Dacron halyard setups. They are sold in pairs for port and starboard rigging on sportfishing boats using compatible TACO Pro Series mounts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwist \u0026amp; Lock butt design attaches to compatible TACO mounts without searching for a pin or bolt hole.\u003c\/li\u003e\n\u003cli\u003eUV-resistant, clear-coated black carbon fiber pole construction for exposed hardtop and T-top installations.\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" pole diameter across both sizes for use with the compatible TACO outrigger mount family.\u003c\/li\u003e\n\u003cli\u003eTelescoping design retracts below 8' on the 20' version and below 9' on the 24' version for trailering and bridge clearance.\u003c\/li\u003e\n\u003cli\u003eStainless-steel Type-316L swivel rings and anodized aluminum collars support long-term use around salt spray.\u003c\/li\u003e\n\u003cli\u003eTriple outrigger line design supports mono or Dacron line layouts for offshore trolling spreads.\u003c\/li\u003e\n\u003cli\u003eSwivel roller collar design lets rollers track toward the lure or bait direction, helping reduce friction on halyard lines.\u003c\/li\u003e\n\u003cli\u003eAdjustable roller line caddy with stainless steel rollers and brass bushings helps keep rigging organized from the T-top or gunwale.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outrigger pole range is offered in two size configurations. The main difference is pole length, retracted length, and compatible TACO mount fitment.\u003c\/p\u003e\u003cp\u003eBoth versions share the black carbon fiber finish, 1-1\/2\" diameter, Twist \u0026amp; Lock butt design, triple outrigger line layout, and paired packaging.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOT-4240CF-HD: 24-foot size. This longer configuration telescopes to less than 9' and is listed for TACO GS-450, GS-500, and GS-500XL mounts, giving larger offshore boats more spread width while still allowing easier storage and clearance.\u003c\/li\u003e\n\u003cli\u003eOT-4200CF-HD: 20-foot size. This configuration telescopes to less than 8' and is listed for the TACO GS-500 mount, with a boat size rating up to 50'.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThese poles are intended for boats already using compatible TACO Pro Series outrigger mounts. The Twist \u0026amp; Lock connection reduces the usual handling around pin alignment at the base, which is helpful when setting up at the dock or getting the spread ready before a trolling pass.\u003c\/p\u003e\u003cp\u003eThe adjustable roller line caddy supports rigging to a T-top or gunwale, and the locking pin design keeps the poles from collapsing when fully extended. After fishing, the telescoping sections collapse for transport, storage, and reduced overhead clearance.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis range fits offshore anglers running a wider trolling spread for ballyhoo, mullet, squid chains, dredges, or mixed lure and bait presentations. The 20' version is a practical match for many center consoles up to 50', while the 24' version gives additional reach on larger boats with the listed compatible mount setup.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne pair of Carbon Fiber Twist \u0026amp; Lock tele-outrigger poles\u003c\/li\u003e\n\u003cli\u003eAdjustable roller line caddy with stainless steel rollers and brass bushings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"20-Inch","offer_id":51550991548662,"sku":"APL810027-V3","price":4195.99,"currency_code":"USD","in_stock":true},{"title":"24-Inch","offer_id":51550991581430,"sku":"APL810027-V7","price":4199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1326104_apl402514_jpeg.jpg?v=1787806128"},{"product_id":"apl919299","title":"TACO Marine SuproFlex Medium Rub Rail Kit, 2 in x 29\/32 in, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Medium Rub Rail Kit is a semi-rigid vinyl rub rail kit for medium boats that need hull-side protection with a clean finished edge. It measures 2 inches high by 29\/32 inch wide and is offered in 60-foot and 80-foot kit lengths, giving boat owners and installers options for matching the run around the hull.\u003c\/p\u003e\u003cp\u003eSuproFlex uses co-extruded vinyl with two hardness levels, pairing a rigid backing with a softer front face that helps absorb everyday contact from docks, pilings, and rafting alongside other boats. The profile comes in a continuous coil, so it can follow most hull shapes without pre-forming and with only minimal heat needed for bends.\u003c\/p\u003e\u003cp\u003eThis medium kit is a practical match for center consoles, bay boats, and similar boats in the 22 to 30-foot range where a full rub rail replacement or clean refit is needed. It is also predrilled for fasteners, with #10 screws spaced 4 inches on center, which helps keep installation layout consistent along the hull.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch by 29\/32-inch SuproFlex medium rub rail profile for rub rail replacement and refit work on many mid-size boats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl construction combines a rigid backing with a softer front face for impact absorption along the hull edge.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage dock contact, trailer handling, and light side impacts during normal boat use.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format reduces joints and helps the rail follow curved hull sections with less installation work.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming required, with minimal heat needed for bends during fitting.\u003c\/li\u003e\n\u003cli\u003ePredrilled for #10 fasteners at 4-inch centers for cleaner spacing during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with the included V12-0307 insert, with insert color matched to the selected variant.\u003c\/li\u003e\n\u003cli\u003eIncludes stainless-steel end caps and screws for a complete rub rail kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Medium Rub Rail Kit is offered in multiple configurations so the rail length and visible color can be matched to the boat and the refit plan.\u003c\/p\u003e\u003cp\u003eThe profile size, SuproFlex construction, predrilled fastener layout, included insert family, stainless-steel end caps, screws, USA manufacture, and 5-year limited warranty are consistent across these variants. The differences are the kit length, rub rail color, and insert color used with the selected finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9990BBK60-2: Black, 60-inch length option. This version uses a black rub rail with a Flex Chrome insert, giving the hull edge a darker base with a bright accent line.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM60-2: White, 60-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert, a common look for boats with white gelcoat and bright trim.\u003c\/li\u003e\n\u003cli\u003eV11-9990BBK80-2: Black, 80-inch length option. This version keeps the black rub rail and Flex Chrome insert combination while allowing more length for a larger perimeter run.\u003c\/li\u003e\n\u003cli\u003eV11-9990GRD80-2: Grey, 80-inch length option. This version uses a gray rub rail with a gray insert for a more uniform finish along the hull side.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM80-2: White, 80-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert and provides the longer kit length for boats that need the additional run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFor a clean installation, the old rail and fasteners should be removed, the mounting surface cleaned, and the new SuproFlex coil worked around the hull before final fastening. Because the rail is flexible and does not need pre-forming, it is easier to manage around common bow and transom curves than many traditional vinyl rub rails.\u003c\/p\u003e\u003cp\u003eThe predrilled layout helps maintain even fastener spacing, but the installer should still confirm alignment, end cap placement, and insert seating before the final pass. As with any rub rail replacement, the selected kit length should be checked against the boat’s actual perimeter, including any allowance needed for trimming and end finishing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit suits owners restoring worn rub rail, repairing impact-damaged trim, or refreshing the look of a center console, bay boat, or similar hull. It is especially useful where the boat sees regular dockside contact, raft-ups, trailer loading, or tight marina handling.\u003c\/p\u003e\u003cp\u003eThe finish options make it easier to keep the replacement close to the boat’s existing style. Black and Frosty White versions include a Flex Chrome insert for a brighter trim line, while the gray version keeps the insert color matched to the rail for a subtler look.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex medium rub rail coil in the selected color and length\u003c\/li\u003e\n\u003cli\u003eV12-0307 insert in the color supplied with the selected variant\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Grey \/ 80-Inch","offer_id":51551049974006,"sku":"APL919299-V5","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 80-Inch","offer_id":51551050006774,"sku":"APL919299-V9","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 60-Inch","offer_id":51551050039542,"sku":"APL919299-V7","price":769.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 80-Inch","offer_id":51551050072310,"sku":"APL919299-V6","price":964.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 60-Inch","offer_id":51551050105078,"sku":"APL919299-V1","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371213_apl919299_jpeg.jpg?v=1787807224"},{"product_id":"apl287383","title":"TACO Marine SuproFlex Small Rub Rail End Cap, For V11-9960, Type-316L SS, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0274 is a small stainless steel end cap for finishing a SuproFlex V11-9960 rub rail at the stern of a boat. It closes off the end of the rail run and helps keep the insert seated, giving the installation a clean termination point instead of leaving the rub rail open at the transom.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror polish finish, so it matches the look of polished stainless rub rail hardware used on exposed deck and hull areas. It is made for #8 screw fastening and is a fit-specific accessory for the SuproFlex V11-9960 profile.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO Marine SuproFlex V11-9960 rub rail installations.\u003c\/li\u003e\n\u003cli\u003eCaps the stern end of the rub rail for a finished appearance.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert intact at the end of the run.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction suits exposed marine hardware locations.\u003c\/li\u003e\n\u003cli\u003eMirror polish finish coordinates with stainless rub rail trim.\u003c\/li\u003e\n\u003cli\u003eMade for #8 screw fastening.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part should be matched to the SuproFlex V11-9960 rub rail profile before ordering. It is not a universal end cap, so the rail profile matters more than the boat brand or model year.\u003c\/p\u003e\u003cp\u003eIt is commonly used where the rub rail terminates at the stern, including transom corners and aft rail ends where an open insert could shift or look unfinished. For a clean installation, dry-fit the cap against the rail end before fastening and make sure the insert is fully seated.\u003c\/p\u003e\u003ch6\u003eInstallation notes\u003c\/h6\u003e\u003cp\u003eInstall the cap after the rub rail and insert are positioned correctly. Use the correct #8 fastener for the mounting surface and avoid overtightening, since the cap needs to sit cleanly against the rail without distorting the surrounding trim.\u003c\/p\u003e\u003cp\u003eOn boats that see regular washdowns or salt exposure, rinse the stainless surface with fresh water as part of normal deck hardware care. The mirror polish finish can be maintained with the same non-abrasive cleaning approach used for other polished stainless fittings on board.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551126880502,"sku":"APL287383","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370525_apl287383_jpeg.jpg?v=1787808270"},{"product_id":"apl639493","title":"TACO Marine Command Ratchet Hinge, 18-1\/2 in, 316 SS, Polished, Hard Stop, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine H25-0048 is a Command Ratchet Hinge with an 18-1\/2 inch length, a hard stop at 105°, and one locking position at 62.5°. It is made for larger marine seat backs, sun pads, bolsters, and lounge backrests where the backrest needs controlled positioning rather than a simple free-swinging hinge.\u003c\/p\u003e\u003cp\u003eThis hinge mounts above the deck and is suited for seat backs up to 22 inches long and cushions up to 4 inches thick. The polished Type-304 stainless steel construction gives it a clean finished look for visible seating hardware while adding corrosion resistance for regular boat use.\u003c\/p\u003e\u003cp\u003eFor fit checks, the hinge measures 18-1\/2 inches long by 3 inches wide. It is sold as a pair, meets ABYC H-31 Class B application requirements with a 500 ft-lb torque load rating for the pair, and has passed a 500-hour salt fog test.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e18-1\/2 inch ratchet hinge for longer marine seat backs, lounge backs, sun pads, and bolsters.\u003c\/li\u003e\n\u003cli\u003eHard stop at 105° helps limit travel and gives the backrest a controlled open position.\u003c\/li\u003e\n\u003cli\u003eOne locking position at 62.5° supports a practical seated or reclined backrest angle.\u003c\/li\u003e\n\u003cli\u003eWorks with seat backs up to 22 inches long and cushions up to 4 inches thick.\u003c\/li\u003e\n\u003cli\u003eAbove-deck mounting keeps the hinge accessible for installation and inspection.\u003c\/li\u003e\n\u003cli\u003ePolished Type-304 stainless steel construction suits visible cockpit and deck seating hardware.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC H-31 Class B application requirements with a 500 ft-lb torque load rating for the pair.\u003c\/li\u003e\n\u003cli\u003e500-hour salt fog test rating supports use in saltwater and washdown environments.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for matched left and right seating installations.\u003c\/li\u003e\n\u003cli\u003eCovered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis hinge is a strong match for builders, refit shops, and owners replacing or upgrading seating hardware on cockpit lounges, aft-facing seats, convertible sun pads, and bolster assemblies. The 18-1\/2 inch length gives more support than a short hinge on wider or taller backrest panels, while the 3 inch width should be checked against the mounting surface before drilling.\u003c\/p\u003e\u003cp\u003eBecause it mounts above the deck, the hinge location, fastener access, cushion thickness, and the swing path of the backrest should all be confirmed during layout. The hard stop and locking angle are part of the hinge geometry, so both hinges in the pair should be aligned evenly for smooth movement and even load sharing.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eOn center consoles, day boats, cruisers, and fishing boats, this hinge works well where a seat back needs to stay put in a usable position and stop before over-traveling. It is especially useful for lounge seating and convertible deck seating where passengers may lean against the backrest while the boat is underway or while anchored.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe polished stainless finish is suitable for visible marine hardware, but it should still be rinsed with fresh water after salt exposure and cleaned with products made for stainless steel. Routine checks of the mounting fasteners and hinge movement help keep the seat back secure, especially on boats that see vibration, trailering, or frequent washdowns.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of Command Ratchet Hinges\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551150702838,"sku":"APL639493","price":829.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324031_apl639493.png?v=1787809016"},{"product_id":"apl511579","title":"TACO Marine Transom Cross Tie Cleat XL, For 1-7\/8 in Rod Holders, 5\/8 in Dock Lines, Brushed Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F30-0863BSA-1 is a portable Transom Cross Tie Cleat XL for keeping stern dock lines elevated and clear of outboard motor cowlings during short-term docking. It gives the stern a raised tie-off point when the dock sits lower than the engines, which is a common issue on center consoles, bay boats, and other outboard-powered boats.\u003c\/p\u003e\u003cp\u003eThis XL cleat uses a brushed aluminum finish with a 15 degree S-shape, 9 in. cleat design. The 5-1\/2 in. sleeve fits into standard 1-7\/8 in. open-bottom gunwale rod holders, and the latching mechanism holds the cleat in place while still allowing it to be removed and stowed when it is not needed.\u003c\/p\u003e\u003cp\u003eThe cleat accepts dock lines up to 5\/8 in. and can also be used for light onboard tasks such as hanging fenders or chum bags. It is useful for docking and temporary tie-off situations, but it is not intended for permanent docking.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRaises stern dock lines to help keep them away from outboard motor cowlings when tying off at the transom.\u003c\/li\u003e\n\u003cli\u003eFits standard 1-7\/8 in. open-bottom gunwale rod holders with a 5-1\/2 in. sleeve.\u003c\/li\u003e\n\u003cli\u003e15 degree S-shape, 9 in. cleat gives room to manage dock lines up to 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eLatching mechanism helps hold the cleat in the rod holder while keeping removal and reinstallation straightforward.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum finish suits visible cockpit and transom areas without adding permanent hardware.\u003c\/li\u003e\n\u003cli\u003eLoop hole design supports additional temporary uses such as hanging fenders or chum bags.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis cleat drops into a compatible open-bottom rod holder, so it is a practical option when the boat already has stern or gunwale rod holders in the right location. Before ordering, check that the rod holder is open at the bottom and has a 1-7\/8 in. diameter opening that can accept the sleeve.\u003c\/p\u003e\u003cp\u003eBecause it is removable, it works well for boaters who want a clean deck layout while underway and a more convenient stern tie-off point when they arrive at the dock. It should be stowed when not in use and should not replace a fixed cleat for long-term mooring.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe Transom Cross Tie Cleat XL is a good match for outboard boats that regularly dock stern-to or alongside docks where the line angle would otherwise run too low across the engines. It helps keep dock lines organized during arrival, fueling, marina stops, and short dockside stays.\u003c\/p\u003e\u003cp\u003eFor fishing boats, the removable format is also useful because the cleat can be installed only when needed, leaving the rod holder available for normal use the rest of the time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551151620342,"sku":"APL511579","price":289.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370511_apl511579_jpeg.jpg?v=1787809055"},{"product_id":"apl574544","title":"TACO Marine Rigid Vinyl Flex-Core Rub Rail, Frosty White, 29\/32 in W x 2 in H x 60 ft L","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V21-9906WHC60D-1 is a Frosty White rigid vinyl Flex-Core rub rail for replacing or upgrading the protective rail around a boat’s gunwale. It uses a 2-inch high profile with an approximate 7\/8-inch width, supplied in a 60-foot continuous coil so the rail can wrap the hull with fewer visible interruptions.\u003c\/p\u003e\u003cp\u003eThis rub rail pairs a rigid PVC outer cap with a lighter high-density inner core, giving it the traditional look of a rigid vinyl rail while making handling and bending more manageable during installation. The continuous coil format helps reduce butt joints around the boat, which is useful on runabouts, fishing boats, flats boats, bay boats, and other medium-size hulls where a clean sheer line matters.\u003c\/p\u003e\u003cp\u003eThe rail is drilled and countersunk for #8 screws on 8-inch centers, and it requires the S11-4511 insert to complete the installation. The Frosty White finish is a practical match for many white hulls and deck lines, especially when the goal is a clean replacement rather than a contrasting rub rail.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRigid vinyl Flex-Core rub rail with a 2-inch by approximately 7\/8-inch profile for gunwale protection and trim replacement.\u003c\/li\u003e\n\u003cli\u003e60-foot continuous coil reduces the need for butt joints around the hull and helps create a cleaner finished line.\u003c\/li\u003e\n\u003cli\u003eSolid rigid PVC cap stock gives the rail its traditional surface appearance and impact behavior.\u003c\/li\u003e\n\u003cli\u003eHigh-density inner core helps absorb everyday dockside bumps and makes the rail easier to handle during installation.\u003c\/li\u003e\n\u003cli\u003eDrilled and countersunk for #8 screws on 8-inch centers, which supports a consistent fastening pattern.\u003c\/li\u003e\n\u003cli\u003eRequires S11-4511 insert, sold separately, for the finished rub rail assembly.\u003c\/li\u003e\n\u003cli\u003eFrosty White color works well for many white hulls, decks, and factory-style rub rail replacements.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, measure the existing rail profile and compare both the height and width against the boat’s current rub rail channel or mounting surface. This rail is commonly used on medium-size boats, but the final fit depends on the hull shape, the mounting flange, and how the existing rail was fastened.\u003c\/p\u003e\u003cp\u003eThe pre-drilled and countersunk screw pattern keeps installation more predictable, especially when replacing a rail along a long gunwale. Because the insert is required and sold separately, it should be planned as part of the same job along with the correct #8 fasteners for the hull material and mounting location.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a strong match for boat owners and repair shops replacing a worn, stained, cracked, or damaged gunwale rail after years of dock contact, trailer loading, fishing use, and washdowns. The Frosty White finish keeps the look close to many factory installations and helps the rail blend into the hull rather than becoming a visual accent.\u003c\/p\u003e\u003cp\u003eFor refits, the continuous coil is helpful when the goal is a smooth perimeter with fewer joints. Careful dry fitting around tight curves, corners, and transom areas will help confirm how the rail bends before final fastening.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rail with fresh water after saltwater use and clean it with mild boat soap during regular washdowns. Avoid harsh solvents or abrasive pads that can mark the vinyl surface, especially on the Frosty White finish.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551158010102,"sku":"APL574544","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370594_apl574544_jpeg.jpg?v=1787809369"},{"product_id":"apl538993","title":"TACO Marine Striker Base Gunnel Mount Pair, For 1-1\/2 in Outrigger Poles, 316 Stainless Steel, 12 Locking Positions","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0150-F is a pair of Striker Base gunnel mounts for 1-1\/2\" outrigger poles, built for anglers who want to run outriggers from the gunnel instead of a T-top. Each mount uses a 45° arm and a polished Type 316L stainless steel base, giving the setup the corrosion resistance and clean deck appearance expected on saltwater fishing boats.\u003c\/p\u003e\u003cp\u003eThis mount set gives offshore and coastal trolling crews a practical way to position outriggers from an easy-to-reach location along the gunwale. The hex nut locking system gives 12 positions, including stand-up and lay-down positions, so the poles can be set for fishing and then moved out of the way when the deck needs to stay clear.\u003c\/p\u003e\u003cp\u003eThe base measures 5-3\/4\" long by 3-7\/8\" wide and installs through the gunnel with a 2\" hole saw. It is sold as a pair and is meant for use at trolling speeds only; the outrigger poles should be vertical when the boat is running.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2\" outrigger poles for gunnel-mounted trolling setups.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for port and starboard installation.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316L stainless steel construction helps resist corrosion in saltwater use.\u003c\/li\u003e\n\u003cli\u003e45° ambidextrous arms work on either port or starboard bases.\u003c\/li\u003e\n\u003cli\u003eHex nut locking system gives 12 positions, including stand-up and lay-down positions.\u003c\/li\u003e\n\u003cli\u003eRemovable arms help keep the deck more open when the outriggers are not in use.\u003c\/li\u003e\n\u003cli\u003eWelded locking adapter adds strength at the arm connection point.\u003c\/li\u003e\n\u003cli\u003eCompatible with Lee, Perko, and Rupp outrigger poles when the pole size matches the 1-1\/2\" mount.\u003c\/li\u003e\n\u003cli\u003eFor trolling-speed use only; the arm does not lock into the mount for running-speed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is installed through the gunnel, so the mounting surface needs enough structure to support outrigger loads while trolling. The lower base tube sits at a 45° angle, and the elliptical opening should be cut at 45° to the mounting surface. For this part number, the installation uses a 2\" hole saw.\u003c\/p\u003e\u003cp\u003eA marine sealant should be used between the base and mounting surface to help protect the deck core and reduce water intrusion. Through-bolting is preferred when the gunnel layout allows it, and backing plates are recommended for mounting surfaces that are 3\/4\" thick or less. Mounting hardware is not included, so bolt length should be selected to match the actual gunnel thickness.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis set is a practical match for fishing boats that need outrigger coverage without adding or modifying a T-top. The gunnel location keeps the controls within reach, which is useful when setting a spread, clearing lines, or moving between cockpit tasks during a trolling run.\u003c\/p\u003e\u003cp\u003eBecause the arms can be removed, the mounts are also useful on boats where cockpit space matters between fishing days. Once the arms are off, the deck area stays less cluttered for dockside work, cleaning, or general family use.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mounts with fresh water and clean them with mild, non-abrasive soap. Avoid bleach, acids, strong degreasers, rubbing compounds, and abrasive cleaners, since those can damage the finish and shorten the life of the stainless surface.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 Striker Base gunnel mount bases\u003c\/li\u003e\n\u003cli\u003e2 removable arms\u003c\/li\u003e\n\u003cli\u003eInstallation template\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551171117302,"sku":"APL538993","price":802.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370289_apl538993_jpeg.jpg?v=1787809880"},{"product_id":"apl833380","title":"TACO Marine Quick Release Fender Lock, For Pontoon Boats, Fits 1 to 1-1\/4 in Square Tube, 1 in Button, 6000-Series Aluminum, Satin Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F18-0186VEL-1 is an aluminum quick-release fender lock for pontoon boats, made for square tube rail applications where fenders need to go on and come off without retying lines each time. It fits 1 to 1-1\/4 inch square tube and uses a 1-inch diameter button for a simple push-button release.\u003c\/p\u003e\u003cp\u003eThis fitting lets a fender line stay set at the preferred height, which helps keep the boat protected at the dock while reducing the small adjustments that usually happen every time a pontoon ties up. When it is time to leave, the pin can be released and stowed, leaving the mounting point in place.\u003c\/p\u003e\u003cp\u003eThe satin anodized finish gives the fitting a clean look against common pontoon rail finishes, while the 6000-series aluminum construction keeps weight low and suits normal dockside use around freshwater or saltwater boating environments.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eQuick-release fender lock for pontoon boats with square tube rail structure.\u003c\/li\u003e\n\u003cli\u003eFits 1 to 1-1\/4 inch square tube, making fit confirmation straightforward before installation.\u003c\/li\u003e\n\u003cli\u003e1-inch diameter button gives the user a clear release point when removing the fender pin.\u003c\/li\u003e\n\u003cli\u003eMounting application fastens from the bottom of the square tube for a clean topside appearance.\u003c\/li\u003e\n\u003cli\u003e6000-series aluminum construction with a satin anodized finish.\u003c\/li\u003e\n\u003cli\u003eUseful for keeping fender height consistent at slips, fuel docks, guest docks, and raft-up situations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis fender lock is intended for pontoon square tube installations, so the main fit check is the rail or tube size. Confirm that the mounting location uses 1 to 1-1\/4 inch square tube and that there is enough access beneath the tube for the bottom-fastening installation.\u003c\/p\u003e\u003cp\u003ePositioning matters as much as fit. The lock should be placed where the fender naturally hangs against the dock-facing side of the pontoon without pulling the line across seating, gates, covers, or boarding areas.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe biggest benefit is repeatability. Once the fender line is set to the height that protects the pontoon, the same fender can be clipped in quickly without guessing the knot position each time. That is helpful for owners who move between a home slip, launch ramp docks, restaurants, fuel docks, and short overnight stops.\u003c\/p\u003e\u003cp\u003eThis is a practical match for pontoon owners who want cleaner fender handling and fewer loose lines around the rail, especially when the boat is used often and fenders are removed for cruising.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the fitting with fresh water after exposure to salt spray, sand, or dirty dock water. Keep the release button and pin area free of grit so the lock continues to operate smoothly, and check the mounting point during regular boat cleaning or spring commissioning.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551177310454,"sku":"APL833380","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324038_apl833380.webp?v=1787810077"},{"product_id":"apl958236","title":"TACO Marine 2-Drink Poly Cup Holder, Suction Cup Mounts, White UV-Stabilized HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P01-2001W is a white 2-drink poly cup holder with suction cup mounts for keeping beverages secure and within reach on board. It holds two full-sized insulated drink holders or mugs, making it useful at the helm, in the cockpit, near a leaning post, on a console, or around a dockside seating area where loose cups tend to slide or tip.\u003c\/p\u003e\u003cp\u003eThe holder measures 10 inches long, 3-5\/8 inches high, and 4-7\/8 inches wide. Its white UV-stabilized high-density polyethylene body is suited to sun exposure and routine marine use, while the suction cup mounting setup allows the holder to be positioned without drilling when a temporary or removable setup makes more sense.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds two full-sized insulated drink holders or mugs for practical drink storage on deck or in the cockpit.\u003c\/li\u003e\n\u003cli\u003eSuction cup mounts let the holder attach to smooth surfaces without a permanent installation.\u003c\/li\u003e\n\u003cli\u003eWhite UV-stabilized high-density polyethylene helps the body handle sun exposure and the marine environment.\u003c\/li\u003e\n\u003cli\u003eCompact 10 inch by 3-5\/8 inch by 4-7\/8 inch footprint fits well in tight spaces around consoles, seating areas, and helm stations.\u003c\/li\u003e\n\u003cli\u003eHidden fastener layout keeps the installed look clean when the holder is used in a fixed mounting setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and placement\u003c\/h6\u003e\u003cp\u003eFor temporary use, place the suction cups on a clean, smooth surface where the holder will not interfere with controls, walkways, hatches, or seating movement. It works best in practical grab-and-go locations such as beside a helm seat, on a fiberglass console face, or near a fishing station where drinks need to stay off the deck.\u003c\/p\u003e\u003cp\u003eFor a more fixed setup, the holder can be mounted to a suitable flat or bulkhead surface. Check the surface thickness and backside access before drilling, and avoid mounting where fasteners could contact wiring, plumbing, fuel lines, or hidden hardware.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis holder is a good match for small powerboats, center consoles, pontoons, fishing boats, and runabouts that need simple beverage storage without adding a large accessory rail or permanent console modification. The removable mounting style also suits shared boats, seasonal setups, and areas that need to be cleared for cleaning or storage.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use and wipe the suction cups clean before reattaching them. Keeping the mounting surface free of salt, sunscreen, wax residue, and dirt helps the suction cups seat more securely.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551244681462,"sku":"APL958236","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323889_apl958236.jpg?v=1787810767"},{"product_id":"apl286274","title":"TACO Marine Come On Board Handle, Rod Holder Mount, 57 in, Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0810-1 is a Come On Board Handle with a rod holder mount for safer, steadier boarding from the dock, swim platform, or cockpit edge. It gives passengers a tall handhold when stepping on or off the boat, especially when the deck is wet, the boat is moving against the dock, or the boarding angle is awkward.\u003c\/p\u003e\u003cp\u003eAt 57-1\/2 inches long with a 1-1\/2 inch tube diameter, this handle fits standard 1-5\/8 inch diameter rod holders and uses a solid gimbal base for proper placement in the holder. No separate deck-mounted receiver is needed, which makes it a practical option for boats that already have a suitable rod holder near the boarding area.\u003c\/p\u003e\u003cp\u003eThe stainless steel Type 304 construction, finger-molded grip area, and multiple-piece layout make it a useful boarding aid for fishing boats, cruisers, center consoles, and other boats where a removable handle is easier to live with than a permanent rail.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e57-1\/2 inch overall length gives passengers a high handhold while stepping on or off the boat.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 inch tube fits standard 1-5\/8 inch diameter rod holders, so no dedicated receiver base is required.\u003c\/li\u003e\n\u003cli\u003eSolid gimbal mount helps the handle sit in the proper position inside the rod holder.\u003c\/li\u003e\n\u003cli\u003eFinger-molded groove handle gives the hand a more secure place to grip when the deck or dock is wet.\u003c\/li\u003e\n\u003cli\u003eStainless steel Type 304 construction suits regular marine use around spray, washdowns, and dockside exposure.\u003c\/li\u003e\n\u003cli\u003eMultiple-piece construction lets the handle break down for storage once the boat is underway.\u003c\/li\u003e\n\u003cli\u003eMesh bag helps the handle dry after wet use and helps protect deck or locker surfaces during storage.\u003c\/li\u003e\n\u003cli\u003e7.5 lb weight gives the handle a substantial feel without making it difficult to remove and stow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis handle is made for boats with a standard 1-5\/8 inch diameter rod holder positioned where passengers board. Before purchase, confirm that the rod holder is close enough to the boarding point, has the correct inside diameter, and is mounted securely enough to support handhold use during boarding.\u003c\/p\u003e\u003cp\u003eBecause the handle uses the existing rod holder instead of a fixed receiver base, it works well on boats where the owner wants a removable boarding aid without drilling a new mounting point into the gunnel, transom platform, or cockpit area.\u003c\/p\u003e\u003ch6\u003eInstallation and storage\u003c\/h6\u003e\u003cp\u003eSetup is straightforward: insert the gimbal base into the rod holder and position the handle for the person boarding. Once the boat is away from the dock, the multiple-piece design allows the handle to be taken apart and stored in the included mesh bag.\u003c\/p\u003e\u003cp\u003eGood storage matters on a boat. Keeping the handle dry, separated from finished deck surfaces, and secured in a locker helps reduce rattling, scratches, and clutter while underway.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis handle is a good match for boat owners who regularly board from floating docks, fixed docks, or side boarding points and want a removable aid that does not stay in place while running. It is especially useful for guests, kids, older passengers, and anyone who benefits from having a tall, easy-to-find grip during boarding.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the handle with fresh water and let it dry before long-term storage. Check the rod holder and handle base periodically for debris, movement, or wear so the handle continues to seat cleanly when it is needed at the dock.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551276073206,"sku":"APL286274","price":469.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370333_apl286274_jpeg.jpg?v=1787810940"},{"product_id":"apl483008","title":"TACO Marine Stand-Off Surface Mount Rod Holder, 1-3\/4 in ID","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P04-0111W is a white stand-off surface mount rod holder for adding fixed rod storage to a boat without cutting a large tube-style opening into the mounting surface. It has a 1-3\/4 in. inside diameter and uses UV-stabilized high-density polyethylene, which makes it a practical fit for exposed cockpit, pontoon, console, or side-panel locations where sun, spray, and routine washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eThe stand-off layout keeps the rod holder raised from the surface, giving better clearance for the rod and reel than a flat clip-style holder. A front access hole helps with fastening during installation, and the included stainless-steel hardware is a useful detail for saltwater and freshwater boats where ordinary hardware can stain or corrode quickly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStand-off surface mount format for permanent rod storage on suitable flat boat surfaces.\u003c\/li\u003e\n\u003cli\u003e1-3\/4 in. inside diameter for checking fit against the rod handles used on board.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized high-density polyethylene construction in white for exposed marine locations.\u003c\/li\u003e\n\u003cli\u003eIntegrated standoffs help create clearance between the holder and the mounting surface.\u003c\/li\u003e\n\u003cli\u003eFront access hole supports cleaner fastening during installation.\u003c\/li\u003e\n\u003cli\u003eStainless-steel hardware is included for use in wet marine environments.\u003c\/li\u003e\n\u003cli\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThis holder is meant for surface mounting, so installation starts with selecting a solid backing area that can take the fasteners and the load from stored rods. Common locations include pontoon rails with suitable panels, cockpit side panels, console sides, transom areas, and other flat surfaces where the rod will not interfere with seating, controls, lines, or walkways.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the rod angle, handle diameter, reel clearance, and the space behind the mounting surface. The front access hole and stand-off shape make the install more straightforward than a flush-mounted tube holder, especially where access behind the panel is limited.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe key fit point is the 1-3\/4 in. inside diameter. It works as a storage holder for rods with handles that fit that opening, but the final fit should be checked against the actual rods used on the boat, especially larger offshore rods, rods with oversized grips, or setups with bulky reel seats.\u003c\/p\u003e\u003cp\u003eThis is a good match for boat owners who want tidy rod storage for fishing days, dockside organization, or keeping extra rods off the deck during coastal cruising and family boating. It is not an electronics or networked accessory, so there are no 12V, 24V, or NMEA integration requirements.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the holder with fresh water after saltwater use and during regular boat washdowns. Keeping sand, salt, and bait residue out of the holder helps the polyethylene surface stay clean and helps the stainless hardware remain in better condition over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite stand-off surface mount rod holder\u003c\/li\u003e\n\u003cli\u003eStainless-steel mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551691047158,"sku":"APL483008","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371299_apl483008_jpeg.jpg?v=1787812393"},{"product_id":"apl144132","title":"TACO Marine Reel Hangers with Rod Tip Holder Kit, SS316L, Adjusts 1.875 to 3.875 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-2810-1 is a stainless steel adjustable reel hanger kit with a rod tip holder for storing trolling reels and rods on a boat or in a dedicated tackle storage area. The reel hanger adjusts from 1.875\" to 3.875\", measures 1-1\/16\" wide by 4\" long, and has a highly polished finish that fits cleanly into visible cockpit, gunnel, cabin, or garage installations.\u003c\/p\u003e\u003cp\u003eThis kit is built around Type 316L stainless steel hardware for use in marine spaces where salt air, washdowns, and humidity are part of the routine. Spring-loaded pins help keep reels seated in the hanger, while the snap-lock rod tip holder keeps the rod tip controlled so the setup stays organized during runs or while the boat is at the dock.\u003c\/p\u003e\u003cp\u003eThe hanger can be mounted vertically, horizontally, or overhead, giving anglers flexibility when working around existing rod storage, hardtop structure, gunnel space, or ceiling panels. Concealed installation screws keep the mounted look clean, and Delrin inserts help protect rod guides and tips from scuffs during storage.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable reel hanger range from 1.875\" to 3.875\" for fitting many popular trolling reels.\u003c\/li\u003e\n\u003cli\u003eType 316L stainless steel construction with a highly polished finish for marine storage areas exposed to moisture and salt air.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded reel retention helps keep reels secure when the boat is moving or stored between trips.\u003c\/li\u003e\n\u003cli\u003eSnap-lock rod tip holder keeps the rod tip in position and helps reduce loose gear movement.\u003c\/li\u003e\n\u003cli\u003eDelrin inserts help protect rod guides and tips where they contact the holder.\u003c\/li\u003e\n\u003cli\u003eMounts vertically, horizontally, or overhead for use on gunnels, ceilings, storage panels, or other suitable flat mounting areas.\u003c\/li\u003e\n\u003cli\u003eConcealed installation screws leave a cleaner finished appearance after mounting.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis reel hanger is a practical fit for anglers who want trolling reels stored where they are easy to reach but not loose in the cockpit or cabin. Before drilling, check the reel width against the 1.875\" to 3.875\" adjustment range and confirm that the selected mounting surface has enough backing and clearance for the reel, rod tip, and hand access.\u003c\/p\u003e\u003cp\u003eThe 3.162\" center-to-center hole spacing is useful when laying out the mount or replacing an existing storage fitting. For overhead or vertical mounting, take time to test the rod and reel position before final installation so the rod tip holder lines up naturally with the rod and does not put strain on the guides.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit suits fishing boats that carry trolling outfits and need a neater way to store reels between runs, at the dock, or during transport. It also works well in a home tackle room or garage when the same rod and reel setup needs to stay protected and ready for the next trip.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe stainless steel and Delrin contact points are well matched to marine storage, but regular care still matters. Rinse away salt residue after heavy spray or washdowns, wipe the polished surface dry when possible, and check the spring-loaded parts during routine cleaning so the hanger continues to open and retain the reel smoothly.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551697666294,"sku":"APL144132","price":124.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370303_apl144132_jpeg.jpg?v=1787812409"},{"product_id":"apl178267","title":"TACO Marine Fixed Clamp-On Center Rigger Mount, 1-1\/8 in, 3\/4 in \u0026 1 in Pipe, SS316","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0311C-1 is a fixed-angle clamp-on center rigger mount for adding a center line to a compatible T-top fishing setup. It clamps to 3\/4\" and 1\" schedule-40 pipe, as well as 1-1\/4\" O.D. tube, giving boat owners a practical way to add a center rigger without changing the main T-top structure.\u003c\/p\u003e\u003cp\u003eThe mount is made from 316 marine grade stainless steel, a strong match for saltwater fishing boats where spray, sun, and vibration are part of normal use. It accepts 1-1\/8\" center rigger poles, including TACO OC Series aluminum center rigger poles, so it works well for anglers adding another trolling position offshore or along the coast.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed-angle clamp-on center rigger mount for adding a center trolling line to a T-top setup.\u003c\/li\u003e\n\u003cli\u003e316 marine grade stainless steel construction for saltwater corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eFits 3\/4\" and 1\" schedule-40 pipe, plus 1-1\/4\" O.D. tube.\u003c\/li\u003e\n\u003cli\u003eAccepts 1-1\/8\" center rigger poles, including TACO OC Series aluminum center rigger poles.\u003c\/li\u003e\n\u003cli\u003eClamp-on mounting makes it useful for compatible existing T-tops where a fixed center rigger position is preferred.\u003c\/li\u003e\n\u003cli\u003eAnti-rotation set screw helps keep the mount steady once positioned on the pipe or tube.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis mount is intended for the hoop area of many standard T-tops and hard tops with compatible pipe or tube sizing. Before installation, measure the outside diameter and confirm the pipe type on the boat, since IPS pipe and O.D. tube measurements are not the same thing.\u003c\/p\u003e\u003cp\u003eBecause it uses a fixed angle, the final mounting position matters. Place the mount where the center rigger pole can clear antennas, hardtop canvas, rocket launchers, lights, and any other top-mounted gear through the full fishing range.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis center rigger mount suits fishing boats that need another line in the spread for offshore trolling, coastal runs, or serious weekend fishing. It is a good match for owners who already have a compatible T-top structure and want a clean, stainless mounting point for a 1-1\/8\" center rigger pole.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51552026198262,"sku":"APL178267","price":190.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370309_apl178267_jpeg.jpg?v=1787813315"},{"product_id":"apl388288","title":"TACO Marine Outrigger Line Tensioner, SS316, 1 to 2-1\/2 in Gunnels, Ronstan Cam Cleat, 1\/8 to 1\/4 in Rope","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0204-1 is an outrigger line tensioner for keeping gunwale-rigged halyard lines tight and properly extended on larger fishing boats. It is built around a stainless steel mushroom-style tensioning point with a Ronstan medium cam cleat, giving double or triple outrigger line setups a clean way to hold line tension without relying on raised camel-back cleats.\u003c\/p\u003e\u003cp\u003eThis tensioner fits boats with 1\" to 2-1\/2\" thick gunnels and installs through the gunnel with a 3\/4\" drill bit. The cam cleat works with 1\/8\" to 1\/2\" rope, making it useful for common outrigger halyard setups on center consoles and sport fishing boats where lines need to stay organized, tight, and easy to adjust during a fishing day.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHelps maintain tension on outrigger halyard lines so pulley blocks stay locked in place and the lines remain fully extended.\u003c\/li\u003e\n\u003cli\u003eSuited for larger boats running double or triple lines on each outrigger.\u003c\/li\u003e\n\u003cli\u003eStainless Steel Type 316 construction supports use in saltwater environments where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eAdjustable fit for 1\" to 2-1\/2\" thick gunnels.\u003c\/li\u003e\n\u003cli\u003eInstalls through the gunnel using a 3\/4\" drill bit.\u003c\/li\u003e\n\u003cli\u003eRonstan medium cam cleat accepts 1\/8\" to 1\/2\" rope for practical line handling.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty lock washer helps reduce loosening from vibration while underway.\u003c\/li\u003e\n\u003cli\u003eElectro-polished bracket with countersunk mounting holes gives the installation a clean finished look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe unit is intended for through-gunnel installation, so the mounting area should be checked for thickness, access, and backing before drilling. Its adjustable design covers gunnels from 1\" to 2-1\/2\" thick, which makes it a practical match for many larger center consoles and sport fishing boats with gunwale-mounted outrigger halyards.\u003c\/p\u003e\u003cp\u003eThe stainless mushroom head and cam cleat layout keep the working line close at hand while reducing the raised hardware profile compared with traditional camel-back cleats. That matters in areas where crew move around the cockpit and gunwale during trolling, clearing lines, or fighting fish.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis tensioner is a good match for anglers who want cleaner outrigger rigging and more controlled halyard tension on boats that fish offshore or run multiple outrigger lines. It is especially useful where line tension needs to be adjusted quickly but the deck and gunwale still need to stay uncluttered.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOutrigger line tensioner\u003c\/li\u003e\n\u003cli\u003e18-8 stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eHeavy-duty lock washer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51552167592182,"sku":"APL388288","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370480_apl388288_jpeg.jpg?v=1787813739"},{"product_id":"apl491162","title":"TACO Marine ShadeFin Adjustable Clamp-On Pipe Mount, 316L Stainless Steel, 3\/4 in or 1 in Pipe, 1-1\/4 in Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-7 is an adjustable clamp-on pipe mount for securing a ShadeFin shade system on boats that do not have an open rod holder available. It fits 3\/4 inch or 1 inch schedule-40 pipe, as well as 1-1\/4 inch O.D. tube, making it useful on many hardtops, T-tops, rails, tower legs, and other round-tube mounting points.\u003c\/p\u003e\u003cp\u003eThe mount gives the ShadeFin a stable attachment point while still letting the user change the shade angle on the water. Adjustment is handled with a soft-touch knob, and the mount indexes every 15 degrees with safety detents so the ShadeFin can be aimed where coverage is needed as the sun moves.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 3\/4 inch or 1 inch schedule-40 pipe and 1-1\/4 inch O.D. tube for use on common boat rail and top structures.\u003c\/li\u003e\n\u003cli\u003eMade from Type-316L stainless steel with a high-polish finish for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003eAngle adjustment every 15 degrees helps position the ShadeFin for changing sun direction during the day.\u003c\/li\u003e\n\u003cli\u003eSoft-touch knob allows on-board adjustment without needing tools for routine repositioning.\u003c\/li\u003e\n\u003cli\u003eSafety detents help hold the selected angle once the ShadeFin is set.\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the ShadeFin seat correctly in the mount.\u003c\/li\u003e\n\u003cli\u003eUseful for boats with limited rod holders or for installations where the available rod holders are already being used for fishing gear.\u003c\/li\u003e\n\u003cli\u003eBacked by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount clamps directly to compatible round pipe or tube, so it is a practical option when adding ShadeFin coverage to a cockpit, helm area, bow seating zone, or aft deck without drilling into a rod holder location. Before purchase, the pipe or tube diameter should be checked carefully against the supported sizes: 3\/4 inch schedule-40 pipe, 1 inch schedule-40 pipe, or 1-1\/4 inch outside-diameter tube.\u003c\/p\u003e\u003cp\u003eBecause the mount carries a shade accessory, the selected location should be a solid structural point with enough clearance for the ShadeFin to rotate and sit at the intended angle. On boats with T-tops or hardtop supports, the mount can help place shade where it is useful while keeping rod holders free for rods, flags, or other accessories.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong match for exposed deck hardware, especially where salt spray, washdowns, and sun exposure are part of normal use. The high-polish finish also matches well with many stainless rail and top assemblies, which helps the mount look integrated rather than like an add-on.\u003c\/p\u003e\u003cp\u003eThis mount is a good fit for boat owners adding TACO Marine ShadeFin coverage to center consoles, fishing boats, cruisers, and day boats where fixed shade is limited or where flexible shade positioning matters during long hours on board.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51552182239478,"sku":"APL491162","price":476.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370561_apl491162_jpeg.jpg?v=1787813830"},{"product_id":"apl141392","title":"TACO Marine Deluxe Trident Rod Holder Cluster Straight, 3-Rod, High-Polished Aluminum, 9-3\/4 in Holders, 1-1\/2 in Shaft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0780BXY-1 is a straight Deluxe Trident rod holder cluster that turns one boat rod holder into three rod positions for kite fishing, trolling spreads, and quick cockpit rod management. It uses three 9-3\/4 inch flared rod holders in a trident layout, with a 1-1\/2 inch shaft made to fit standard rod holders with a 1-5\/8 inch diameter.\u003c\/p\u003e\u003cp\u003eThis cluster is built from welded aluminum with a high-polished finish, giving offshore and coastal anglers a clean way to add rod capacity without drilling new holes or changing the boat’s existing rod holder layout. The straight configuration keeps the setup compact and organized, especially when kite rods, heavy reels, or spare rods need to stay close at hand.\u003c\/p\u003e\u003cp\u003eAn eye strap attachment gives a practical tie-off point for a safety lanyard or de-hooker placement, and the included mesh bag helps the unit dry after wet use while protecting deck lockers and storage surfaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eTurns one existing rod holder into three rod positions for kite fishing or extra cockpit rod storage.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThree 9-3\/4 inch flared rod holders help support larger rods and heavier reel setups.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1-1\/2 inch shaft fits standard rod holders with a 1-5\/8 inch diameter.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWelded aluminum construction with a high-polished finish for use in demanding marine environments.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTrident layout keeps multiple rods close together while reducing clutter around the gunwale.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEye strap attachment gives a tie-off point for a safety lanyard or de-hooker placement.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMesh storage bag allows the cluster to dry after wet use and helps protect storage areas from scratches.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCovered by a 3-year limited warranty.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rod holder cluster drops into a compatible existing rod holder, so it is useful on boats where rod capacity needs to increase without adding permanent hardware. Before ordering, check that the receiving rod holder can accept a 1-1\/2 inch shaft and has the standard 1-5\/8 inch inside diameter needed for proper fit.\u003c\/p\u003e\u003cp\u003eThe straight shaft works well for gunwale-mounted rod holders where a compact, centered setup is preferred. It is a practical match for fishing boats that need fast rod staging during kite fishing, live-bait work, or spread changes while keeping the deck layout clean.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eAnglers running multiple rods from a limited cockpit area will appreciate the extra capacity without a more involved installation. The flared holders help guide rods into place quickly, and the clustered layout keeps kite rods or standby rods within reach while the crew works around the transom or gunwale.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDeluxe Trident Rod Holder Cluster Straight\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMesh storage bag\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51552410173686,"sku":"APL141392","price":544.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370355_apl141392_jpeg.jpg?v=1787814773"},{"product_id":"apl733190","title":"TACO Marine Flared Weld-On Rod Holder, 9-3\/4 in L, 1-3\/4 in ID, Brite Anodized Aluminum, White PVC Liner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-2200BXY-4A is a flared weld-on aluminum rod holder with a 9-3\/4 inch length, 1-3\/4 inch inside diameter, white PVC liner, and polished finish. It is made for permanent welded installation on boat towers, T-tops, radar arches, railings, and leaning posts where a secure rod position matters during trolling, running, or dockside rigging.\u003c\/p\u003e\u003cp\u003eThe flared opening makes rod placement easier when working quickly in the cockpit or around a tower leg, while the tapered liner helps the rod sit neatly inside the holder. The Brite Dip anodized aluminum finish adds a clean look and helps the holder stand up to the saltwater, sun, and washdown conditions common on fishing boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-3\/4 inch overall length with 1-3\/4 inch inside diameter for common offshore and inshore rod setups.\u003c\/li\u003e\n\u003cli\u003eWeld-on aluminum construction for fixed mounting on towers, T-tops, radar arches, railings, and leaning posts.\u003c\/li\u003e\n\u003cli\u003eFlared mouth helps guide the rod into the holder when rods are being moved in and out during active fishing.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liner is tapered to match the flared holder shape and helps protect the rod finish during use.\u003c\/li\u003e\n\u003cli\u003eBrite Dip anodized aluminum with a polished finish gives the holder a clean appearance and added surface protection.\u003c\/li\u003e\n\u003cli\u003eWelded pin construction helps seat the rod butt and works with larger gimbaled fishing rods.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis rod holder is intended for weld-on installation, so it belongs in the hands of a fabricator or installer who can match it to the boat’s aluminum tower, top, arch, rail, or leaning post layout. Before welding, confirm the angle, rod clearance, and spacing around nearby antennas, outriggers, canvas, rocket launchers, and walkways.\u003c\/p\u003e\u003cp\u003eBecause the holder becomes a permanent part of the structure once installed, placement should account for how rods will be reached while fishing and how the boat is used underway. On center consoles and offshore fishing boats, it works well in locations where a clean, fixed rod storage point is needed without adding clamp hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for anglers adding or replacing welded rod storage on towers, T-tops, leaning posts, or custom aluminum work. The polished finish and white liner suit installations where the rod holder remains visible, while the flared entry is useful when rods need to be handled quickly during trolling, drifting, or clearing the cockpit.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51552558940406,"sku":"APL733190","price":100.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370335_apl733190_jpeg.jpg?v=1787815637"},{"product_id":"apl402082","title":"TACO Marine Grand Slam 960 Electric Masthead Anchor Light, For Powered Vessels up to 39 ft, 12V, LED, USCG 3 nm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-960 is an electric masthead anchor light for powered vessels up to 39 feet, or 12 meters, that need a 12-volt navigation light with deck-level control. It is rated for the USCG-required 3 nautical mile visibility range and uses four 3-watt Cree LED chips driven by two Mean Well drivers, giving the buyer clear information for electrical planning before installation.\u003c\/p\u003e\u003cp\u003eThis Grand Slam 960 unit raises and lowers electrically, with push-button operation, an auto-rotating stop feature, and a manual stop option for backup operation. The hidden base wire routes inside the hardtop, so the top surface stays cleaner and there is no under-mount clearance requirement.\u003c\/p\u003e\u003cp\u003eThe polished stainless-steel body has a mirrored finish, with a Type 316L stainless-steel breakaway pin and a stainless-steel anti-backlash linear screw drive. It is a practical upgrade for hardtops where a fixed masthead light is awkward to reach or where a retractable electric light helps reduce interference when the boat is being stored, covered, trailered, or worked around at the dock.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCertified for USCG-required 3 nautical mile visibility on powered vessels up to 39 feet or 12 meters.\u003c\/li\u003e\n\u003cli\u003eRuns on 12-volt DC for lift and descent, with low current draw of 0.6 amps per light.\u003c\/li\u003e\n\u003cli\u003eFour 3-watt Cree LED chips with two Mean Well drivers support steady navigation lighting with efficient power use.\u003c\/li\u003e\n\u003cli\u003eElectric raise and lower operation can be handled from the deck through an On-Off-On control switch.\u003c\/li\u003e\n\u003cli\u003eAuto-rotating stop and manual stop functions help with positioning and backup operation.\u003c\/li\u003e\n\u003cli\u003ePolished stainless-steel body, Type 316L stainless-steel breakaway pin, and stainless-steel threaded screw drive suit exposed hardtop installations.\u003c\/li\u003e\n\u003cli\u003eElectronic Control Module includes a 5A fuse for device protection.\u003c\/li\u003e\n\u003cli\u003eHidden base wire installs inside the hardtop, with no under-mount clearance needed.\u003c\/li\u003e\n\u003cli\u003eSame hole pattern as the GS-950, making it suitable for upgrades from that model where the existing installation matches.\u003c\/li\u003e\n\u003cli\u003eMeets NMMA and ABYC C-5 5.8 requirements and is NMMA Type Accepted.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GS-960 mounts to the top surface and fits all top thicknesses, which helps when working with fiberglass hardtops, tower tops, and other common helm structures. Because the wiring is hidden inside the hardtop and the unit does not need under-mount clearance, it can be a clean fit where space below the mounting area is limited.\u003c\/p\u003e\u003cp\u003eThe base includes a 6-inch lead of 20-gauge wire, and the unit also uses a 12-inch wire lead with a water-sealed Deutsch connector and 18-gauge wire from the base. The Electronic Control Module uses an industry-standard On-Off-On switch layout and includes a 5A fuse, so installers can plan the circuit around the product's 12-volt DC operation and protection requirements.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light makes the most sense on powered boats where the masthead or anchor light needs to be reachable without climbing onto the hardtop. The electric lift and descent are useful for center consoles, sport fishing boats, and cruising boats that need navigation lighting at night but also want less hardware sticking up when the boat is at the dock or in storage.\u003c\/p\u003e\u003cp\u003eThe manual operation point on the nylon knob gives the operator a fallback in case of power loss. For owners replacing a GS-950, the matching hole pattern can reduce the amount of rework needed during the upgrade, while the 12-volt requirement, fuse value, and connector details should still be checked against the vessel's existing wiring before installation.\u003c\/p\u003e\u003ch6\u003eMaterials and durability\u003c\/h6\u003e\u003cp\u003eThe polished stainless-steel body gives the visible housing a clean finish for hardtop and tower installations. The Type 316L stainless-steel breakaway pin, stainless-steel screw drive, anti-backlash ball-bearing motor, and Oil-Lite bronze bushings all support repeated lift and descent in a marine environment where vibration, spray, and regular washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eFor best service life, the light should be installed with proper wire protection, sealed penetrations, and routine inspection of the moving parts and electrical connections. As with any navigation light, lens cleanliness and unobstructed placement matter as much as the light itself when visibility and compliance are the goal.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553071628534,"sku":"APL402082","price":1849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324016_apl402082.png?v=1787817396"},{"product_id":"apl078830","title":"TACO Marine Rub Rail Mounted LED Navigation Light Set, 4 in, Port and Starboard, 12-14VDC, IP68, 2 NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F38-6810B-1 is a 4-inch rub rail mounted LED navigation light set for boats that need port and starboard running lights without adding fixtures on top of the deck. It places the red and green sidelights into the rub rail area, helping keep bow space cleaner and sightlines more open while still giving the boat proper navigation lighting.\u003c\/p\u003e\u003cp\u003eThis set is rated for 12-14VDC systems and draws 0.6 amps at 12V. The lights are certified for ABYC and USCG-approved 2 NM use, with a 112.5-degree unobstructed view for sidelights. The housing layout fits popular 3\/4-inch insert profiles and uses a 4-inch polished stainless-steel joiner cover with an anodized aluminum heat sink behind the LEDs.\u003c\/p\u003e\u003cp\u003eThe IP68 water-resistant rating makes it a practical fit for exposed bow locations where spray, washdowns, and rain are part of normal use. It is a good match for bay boats, center consoles, and other small to mid-size powerboats or sailboats where a low-profile navigation light location is preferred.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail mounted port and starboard LED light set for a cleaner bow layout and fewer deck-mounted obstructions\u003c\/li\u003e\n\u003cli\u003eCertified for ABYC and USCG-approved 2 NM sidelights, with a 112.5-degree unobstructed view\u003c\/li\u003e\n\u003cli\u003eFits popular 3\/4-inch rub rail insert profiles and uses a 4-inch joiner cover\u003c\/li\u003e\n\u003cli\u003eRuns on low-voltage 12-14VDC boat electrical systems with a 0.6 amp draw at 12V\u003c\/li\u003e\n\u003cli\u003eSold as a pair with one 3-watt red port light and one 2-watt green starboard light\u003c\/li\u003e\n\u003cli\u003eIP68 water-resistant rating for exposed marine locations subject to spray and washdowns\u003c\/li\u003e\n\u003cli\u003eHeavy gauge polished stainless-steel joiner cover helps the lights blend into the rub rail assembly\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum heat sink helps manage LED heat during operation\u003c\/li\u003e\n\u003cli\u003eDeutsch plug connection supports a cleaner electrical hookup during installation\u003c\/li\u003e\n\u003cli\u003eRequires #8 stainless-steel fasteners, which are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light set is intended for installation at the rub rail, rather than on the deck or bow cap. Before ordering, compare the boat’s rub rail insert profile and available mounting space with the 4-inch width and 13\/16-inch height of the light assembly. The 3\/4-inch insert profile fit is important, especially on boats where the rub rail shape leaves limited room for hardware and wiring.\u003c\/p\u003e\u003cp\u003eThe installation should place the red light on the port side and the green light on the starboard side, with clear sightlines forward and to the side. Because navigation lights are safety equipment, mounting angle, wiring protection, polarity, and fastener selection should be checked carefully before final assembly.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe lights work with 12V boat systems in the 12-14VDC range. They are not NMEA 2000 or network devices, so integration is handled through the vessel’s standard navigation light circuit, switch panel, and protected wiring. The low current draw helps keep the load modest on small boat electrical systems.\u003c\/p\u003e\u003cp\u003eFor saltwater use, wiring connections should be kept protected from standing water and routed so they are not pinched by the rub rail, deck joint, or fasteners. Use marine wiring practices and circuit protection appropriate for the vessel.\u003c\/p\u003e\u003ch6\u003eMaterials and marine environment\u003c\/h6\u003e\u003cp\u003eThe LED modules sit in a polished stainless-steel joiner cover with an anodized aluminum heat sink. This combination gives the set a finished look at the rub rail and helps with heat control behind the LEDs. The IP68 rating supports exposed placement where the bow may see spray, rain, and regular rinsing.\u003c\/p\u003e\u003cp\u003eRoutine care is simple: rinse the area with fresh water after saltwater use, avoid harsh cleaners on the polished cover, and inspect the fasteners and wiring during regular boat maintenance.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne 3-watt red port LED navigation light\u003c\/li\u003e\n\u003cli\u003eOne 2-watt green starboard LED navigation light\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553100759286,"sku":"APL078830","price":307.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324000_apl078830.webp?v=1787817480"},{"product_id":"apl353468","title":"TACO Marine Grand Slam 2801 Outrigger Top Mounts, For 1-1\/2 in Outriggers, 30° Offset Handle, 12 Locking Positions","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-2801 is a Grand Slam 2801 top-mounted outrigger base with a 30 degree offset handle for 1-1\/2 in. outrigger poles on center consoles and T-tops. It is sold as a pair and is made for offshore fishing boats where the crew needs outrigger control from the top while keeping more hand clearance around the T-top structure.\u003c\/p\u003e\u003cp\u003eThis mount fits hardtops up to 2-1\/2 in. thick, gives the arm a 180 degree swing, and allows horizontal rotation from below the T-top. Cast stainless steel and machined aluminum construction, plus a locking head, make it suited to saltwater trolling where vibration, spray, and repeated adjustments are part of normal use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e30 degree offset handle gives extra hand clearance around many T-top layouts.\u003c\/li\u003e\n\u003cli\u003eCompatible with 1-1\/2 in. Tele-Outrigger poles.\u003c\/li\u003e\n\u003cli\u003eCan work with 1-1\/8 in. Tele-Outrigger poles when used with the GSC-0025 base reducer.\u003c\/li\u003e\n\u003cli\u003eFits hardtops up to 2-1\/2 in. thick.\u003c\/li\u003e\n\u003cli\u003e180 degree arm swing supports common trolling spread adjustments from the hardtop.\u003c\/li\u003e\n\u003cli\u003eHorizontal rotation can be handled from under the T-top.\u003c\/li\u003e\n\u003cli\u003eCast stainless steel and machined aluminum construction helps the mount handle saltwater use.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for port and starboard outrigger installation.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe GS-2801 is intended for T-top and hardtop installations where a top-mounted outrigger base is preferred. The offset handle is especially useful when the surrounding pipework, electronics box, canvas, or hardtop edge leaves limited room for hand movement.\u003c\/p\u003e\u003cp\u003eBefore installation, check the hardtop thickness, the available handle clearance, and the pole size being used. For 1-1\/8 in. poles, the base reducer is required. Proper backing and fastener selection should match the hardtop construction and the loads expected from offshore trolling.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis pair is a practical fit for center consoles and offshore fishing boats that run outriggers for trolling spreads. The top-mounted layout keeps the outrigger base clean on the hardtop, while below-top rotation lets the crew make spread adjustments without climbing above the T-top.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553124483318,"sku":"APL353468","price":2577.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370307_apl353468_jpeg.jpg?v=1787817635"},{"product_id":"apl555288","title":"TACO Marine Rub Rail End Cap, For V11-2423 \u0026 V11-3426, 2 in, White Nylon","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F90-0001WN is a 2-inch white nylon rub rail end cap made to finish the stern end of compatible TACO rub rail installations. It gives the rail a clean stopping point and helps keep the rub rail insert in place once the rail is trimmed and secured.\u003c\/p\u003e\u003cp\u003eThis end cap fits TACO rub rail profiles V11-2423 and V11-3426, so it is best matched by checking the existing rail profile before ordering. The white finish works well on many fiberglass hulls and transoms where a low-profile trim piece is needed to complete a repair, refit, or new rub rail installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch rub rail end cap for finishing the stern end of a rub rail run.\u003c\/li\u003e\n\u003cli\u003eWhite nylon construction for use as exterior boat trim hardware.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO rub rail profiles V11-2423 and V11-3426.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert seated at the end of the installation.\u003c\/li\u003e\n\u003cli\u003eSold individually, making it suitable for single-side replacement or matched pair ordering as needed.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eUse this end cap after the rub rail and insert have been cut to length and aligned at the stern. Fit should be confirmed against the rail profile, especially on older boats where rub rail styles may have changed during previous repairs.\u003c\/p\u003e\u003cp\u003eFor the cleanest result, dry-fit the cap before final fastening and make sure the insert sits fully inside the rail. This helps avoid a loose end that can catch during docking, trailering, washdowns, or routine handling around the transom.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part is a practical match for boat owners replacing a damaged rub rail end cap, completing a rub rail installation, or tidying up stern trim after a repair. It is especially useful where the exposed end of the rail needs a finished look and the insert needs a defined stopping point.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the area during normal boat washdowns and check the cap during seasonal inspections. If the rub rail insert begins to creep or the cap is damaged by dock contact, replacing the end cap is a simple way to restore the finished edge of the rail.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne white 2-inch rub rail end cap.\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553127923958,"sku":"APL555288","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324027_apl555288.webp?v=1787817837"},{"product_id":"apl671050","title":"TACO Marine 2-Rod Bungee Rod Holder, White, 9-1\/4 in, HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-132W is a white 2-rod bungee rod holder rack for under-gunnel rod storage, made to keep rods tucked away but still quick to reach on fishing boats and pontoons. It measures 9-1\/4 inches long, 3-3\/4 inches deep, and 1\/2 inch thick, giving it a low-profile fit along the inside of the gunwale or another flat storage area where rods need to stay clear of the deck.\u003c\/p\u003e\u003cp\u003eThe rack is made from U.V. stabilized high-density polyethylene, a practical material choice for cockpit and gunnel areas exposed to sunlight, spray, and regular washdowns. The integrated bungee cords hold rods in place while the boat is running, trailering, or moving through chop, helping reduce clutter and keeping tackle easier to manage during a fishing day.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds two fishing rods for simple under-gunnel storage without taking up deck space.\u003c\/li\u003e\n\u003cli\u003eBungee retention keeps rods seated in the rack while the boat is underway.\u003c\/li\u003e\n\u003cli\u003eU.V. stabilized high-density polyethylene helps the white rack stand up to sun exposure in marine use.\u003c\/li\u003e\n\u003cli\u003e9-1\/4 inch length, 3-3\/4 inch depth, and 1\/2 inch thickness suit compact mounting areas along the gunwale.\u003c\/li\u003e\n\u003cli\u003eWhite finish blends cleanly with many fiberglass interiors and cockpit layouts.\u003c\/li\u003e\n\u003cli\u003eSupplied with a mounting backing plate and hardware for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rack is intended for mounting under the gunwale or in another protected, reachable storage location where rods can slide in and out without interfering with seating, hatches, wiring, or rod tips. Before drilling, check the back side of the mounting area for access, clearance, and enough surface strength to support the rack and the rods it will carry.\u003c\/p\u003e\u003cp\u003eThe included backing plate and hardware help spread the load at the mounting point. On cored fiberglass, aluminum, or pontoon panels, a dry-fit is useful before final fastening so the rack sits straight and the rods have a natural path in and out of the holders.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis 2-rod rack is a good match for anglers who want a tidy place for spare rods, trolling setups, or quick-change tackle without adding tall vertical holders to the deck. It works especially well in cockpit and under-gunnel spaces where rods need to stay protected from foot traffic but remain close at hand.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rack and bungee area with fresh water after saltwater trips, especially when it has been exposed to spray, bait, or sunscreen residue. During regular boat checks, look over the mounting hardware and bungee tension so the rack continues to hold rods securely through vibration, trailering, and repeated use.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-rod bungee rod holder rack\u003c\/li\u003e\n\u003cli\u003eMounting backing plate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553152532726,"sku":"APL671050","price":93.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371290_apl671050_jpeg.jpg?v=1787818942"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/ac04fd8a-6d63-44c8-bca0-83bc6e8f0414.webp?v=1787791342","url":"https:\/\/www.apollolighting.com\/collections\/brand-taco-marine.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}