{"title":"Devices","description":"","products":[{"product_id":"apl621763","title":"Vimar Idea 2-Way Switch, 1P, 10 AX, 250 V, 3 Terminals, Central OFF Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16140 is a modular 1-pole 2-way switch for flush-mounted Vimar IDEA installations where you need directional control from one rocker. It uses a 3-terminal layout with directional arrows and a central OFF position, is rated 10 AX at 250 V~, and carries IP40 protection for interior locations.\u003c\/p\u003e\u003cp\u003eOn a boat, this switch fits best in enclosed cabin panels, protected helm stations, and other built-in control points that stay clear of direct spray. The body is made from halogen-free thermoplastic with a matte untreated surface, and it installs with snap fastening in the supporting frame.\u003c\/p\u003e\u003cp\u003eIt also includes a label surface for circuit identification and runs as a non-illuminated switch with no monitoring contact. For self-ballasted lamp loads, the published limit is 100 W.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole 2-way switch with 3 terminals, directional arrows, and a central OFF position\u003c\/li\u003e\n\u003cli\u003e10 AX at 250 V~ for AC switching duties within the stated rating\u003c\/li\u003e\n\u003cli\u003eBuilt-in module with snap fastening for Vimar IDEA flush-mount assemblies\u003c\/li\u003e\n\u003cli\u003eIP40 protection for covered interior panels and other sheltered mounting points\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte surface finish\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit marking and easier panel identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same IDEA switching format.\u003c\/p\u003e\u003cp\u003eAcross both variants, the switching layout stays the same: 1-pole, 10 AX, 250 V~, 3 terminals, central OFF position, built-in snap mounting, and IP40 protection. The visible difference between them is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16140.B: Color Ivory. This version keeps a lighter look on panels and trim where a pale switch finish is preferred.\u003c\/li\u003e\n\u003cli\u003eVM16140: Color Gray. This version suits panels that already use the gray IDEA device color.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis switch is part of the Vimar IDEA series, so it is intended for IDEA-compatible mounting frames, supports, and cover plates. The single-rocker format makes it a straightforward replacement when the rest of the installation already uses the same modular family.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners and installers who need a center-off directional switch in a cabin or enclosed helm panel without changing to a different device range.\u003c\/p\u003e\u003ch6\u003eElectrical and placement\u003c\/h6\u003e\u003cp\u003eThe confirmed rating is for AC service at 250 V~ and 10 AX. For onboard use, that makes it better suited to cabin and helm switching points that stay sheltered, rather than exposed deck locations or washdown areas. IP40 is appropriate where the switch is protected from direct water exposure.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550269767926,"sku":"APL621763-V8","price":29.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550269800694,"sku":"APL621763-V0","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364173_apl013685_jpeg.jpg?v=1787789373"},{"product_id":"apl557363","title":"Vimar Eikon 20021 Interchangeable 1-Module Rocker Button Cover, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20021 is a 1-module interchangeable rocker button cover that can be lighted, used to finish a matching Eikon switch or push-button control on board.\u003c\/p\u003e\u003cp\u003eIt mounts with a clamp fit and includes a monitoring window\/light outlet, so a status light or locator light can show through when the underlying mechanism supports it. The IP40 rating makes it a good fit for protected interior panels rather than areas exposed to spray, washdowns, or deck weather.\u003c\/p\u003e\u003cp\u003eIn grey, the color matches RAL 7024 (similar) with a matt, untreated surface. The button is made from halogen-free thermoplastic, which suits typical cabin and helm installations where vibration and daily use are common.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module rocker button cover for the Vimar Eikon system\u003c\/li\u003e\n\u003cli\u003eLightable format with monitoring window\/light outlet for visible indication\u003c\/li\u003e\n\u003cli\u003eClamp mounting for a secure fit on the compatible mechanism\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for interior switch panels and dry technical spaces\u003c\/li\u003e\n\u003cli\u003eOffered in multiple colors and symbol markings to match the panel layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis button cover is available in three color finishes: grey, silver, and white.\u003c\/p\u003e\u003cp\u003eSymbol options include Standard (no marking), Bell, Light, O\/I, and Key. The symbol choice is used to match the function on a multi-switch panel, so circuits stay recognizable at a glance.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a control element cover, not a complete switch by itself. It is intended to be paired with the compatible 1-module Eikon mechanism and the matching Eikon mounting frame and cover plate system already installed on the boat.\u003c\/p\u003e\u003cp\u003eIf you are mixing finishes on the same panel, confirm the series is Eikon across frames and plates so module sizes and clip points line up correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is typically a front-fit clamp onto the mechanism after wiring is complete and power is isolated. Check that the rocker pivots freely and that the monitoring window aligns with any indicator or illumination point behind it.\u003c\/p\u003e\u003cp\u003eWhen used in a helm or cabin switch bank, place it where it stays out of direct spray and where routine cleaning will not force water into the mechanism area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of rocker cover is commonly used for cabin lighting, courtesy lights, freshwater pump control, electronics master switching, and other circuits that benefit from clear panel labeling. Symbol versions are especially helpful on boats with multiple identical modules in a tight switch row.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where the boat already uses Vimar Eikon modules and you want consistent markings and finishes across a new or expanded switch panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild cleaner. Avoid solvent-based products that can haze plastic surfaces. If the area sees frequent condensation, keep the panel ventilated and address any moisture at the mechanism level rather than relying on the button cover for sealing.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Standard","offer_id":51550278156534,"sku":"APL557363-V6","price":4.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Key","offer_id":51550278189302,"sku":"APL557363-V98","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I","offer_id":51550278222070,"sku":"APL557363-V32","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ O\/I","offer_id":51550278254838,"sku":"APL557363-V47","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Grey \/ O\/I","offer_id":51550278287606,"sku":"APL557363-V1","price":4.05,"currency_code":"USD","in_stock":true},{"title":"White \/ Key","offer_id":51550278320374,"sku":"APL557363-V30","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Key","offer_id":51550278353142,"sku":"APL557363-V05","price":4.85,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Light","offer_id":51550278385910,"sku":"APL557363-V0","price":5.04,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Standard","offer_id":51550278418678,"sku":"APL557363-V9","price":3.9,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Bell","offer_id":51550278451446,"sku":"APL557363-V4","price":4.21,"currency_code":"USD","in_stock":false},{"title":"White \/ Standard","offer_id":51550278484214,"sku":"APL557363-V3","price":3.9,"currency_code":"USD","in_stock":true},{"title":"White \/ Light","offer_id":51550278516982,"sku":"APL557363-V2","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Light","offer_id":51550278549750,"sku":"APL557363-V7","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Bell","offer_id":51550278582518,"sku":"APL557363-V5","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ Bell","offer_id":51550278615286,"sku":"APL557363-V8","price":4.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363282_apl557363_jpeg.jpg?v=1787789539"},{"product_id":"apl815207","title":"Vimar EIKON 2-Module Two-Rocker Push Buttons, Marine Version, Illuminated, 29V, IP40, Grey (RAL 7024)","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMR20523 is a 2-module EIKON-series control device with two rocker push buttons for domestic switching functions on board. It is rated for a nominal 29 V and supports integrated lighting for better visibility when the cabin lights are down.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt, untreated surface in grey (RAL 7024). With an IP40 rating, it is intended for protected interior locations where it will not be exposed to washdowns or direct spray. This mechanism is completed with interchangeable 1- or 2-module button covers, which are selected separately to match your labeling and layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module device with two rocker push buttons for EIKON modular installations\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 29 V\u003c\/li\u003e\n\u003cli\u003eIntegrated lighting support to help the control stay visible in low-light cabins\u003c\/li\u003e\n\u003cli\u003eFlush-mount installation with snap fastening for quick, clean panel integration\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with matt, untreated finish\u003c\/li\u003e\n\u003cli\u003eGrey color matched to RAL 7024\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for dry, sheltered onboard mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 44.8 mm wide, 49.0 mm high, 36.1 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis unit is meant to sit in a flush-mounted EIKON position and snap into place as part of the modular assembly. Plan for at least 36.1 mm of depth behind the mounting surface, plus room for wiring bend radius so the mechanism does not get stressed when the panel is secured.\u003c\/p\u003e\u003cp\u003eBecause the front is finished with separate interchangeable button covers, confirm you have the correct 1- or 2-module cover style for your panel layout before closing up the installation. The lighting feature is most useful at helm and cabin panels where the control needs to be located quickly at night.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eIt occupies two EIKON modules and is intended for builds that use the EIKON modular format and matching cover plates and button covers. When replacing an existing device, check that your current frame and aesthetics are EIKON-based and that your chosen covers match the function you want to label at the switch position.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of two-rocker control is commonly used at interior switch panels for cabin or courtesy lighting, zoned circuits, and other onboard switching tasks where a compact two-button layout keeps the panel tidy. It is a good match for boats standardizing on EIKON components in grey and keeping controls in protected areas rather than exposed cockpits or open decks.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the surface with a soft cloth and mild cleaner as needed, and avoid harsh solvents that can mark thermoplastic finishes. If a switch position feels loose over time, recheck the snap engagement and wiring strain relief so vibration does not work the mechanism free.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550307025142,"sku":"APL815207","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827165_apl-ohy-vvf-cfo.jpg?v=1787790454"},{"product_id":"apl483261","title":"Vimar Eikon Push Button Switch, 1P NO, 10A 250V, With Indicator Unit, Flush-Mount, IP40, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20068 is a 1-pole, normally open momentary push button rated 10 A at 250 V~ with an indicator window for a signalling unit. It is a flush-mounted module that snaps into compatible frames and cover plates, with a front protection rating of IP40 and a compact body size of 22.30 mm wide, 49.00 mm high, and 38.50 mm deep.\u003c\/p\u003e\u003cp\u003eThis style of push button is commonly used on boats for momentary control and signalling, such as triggering a relay, sounding a buzzer, or sending a control input to another device, while the indicator window can be used to show status once a compatible signalling unit is installed. IP40 is suited to protected interior areas like cabins, nav stations, and inside consoles, not exposed locations where spray, washdowns, or heavy condensation are expected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO momentary contact (closes only while pressed), rated 10 A at 250 V~\u003c\/li\u003e\n\u003cli\u003eIntegrated indicator window with diffuser; signalling unit is not included\u003c\/li\u003e\n\u003cli\u003eFlush-mounted module with engage (snap) fastening for modular installations\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior, dry mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact body: 22.30 mm width, 49.00 mm height, 38.50 mm depth\u003c\/li\u003e\n\u003cli\u003eSingle rocker layout with label space to identify the circuit or function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis push button is offered in multiple configurations so you can match the faceplate finish and the indicator color used in the installation.\u003c\/p\u003e\u003cp\u003eThe finish and the indicator diffuser color are what change between versions. The contact type and electrical rating (1P NO, 10 A at 250 V~), IP40 protection, and the 22.30 x 49.00 x 38.50 mm body size remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20068.B.N: Finish Silver; Indicator White Indicator. This version matches silver-themed installations and keeps the indicator window a neutral white.\u003c\/li\u003e\n\u003cli\u003eVM20068.B: Finish Grey; Indicator White Indicator. A grey finish works well in darker panels and helm areas where glare and contrast are a concern.\u003c\/li\u003e\n\u003cli\u003eVM20068.B.B: Finish White; Indicator White Indicator. A white finish blends into light-colored bulkheads and switch panels, with a white diffuser for the indicator window.\u003c\/li\u003e\n\u003cli\u003eVM20068.V.B: Finish White; Indicator Green Indicator. A green indicator diffuser helps separate a function from other white indicators on the same panel, such as status or enable signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan this as a flush-mounted installation in a suitable back box, then snap the module into the compatible frame before fitting the cover plate. Allow for the 38.50 mm device depth and enough room for wire bends and terminations behind the switch.\u003c\/p\u003e\u003cp\u003eIf you want the indicator to illuminate, the unit is supplied without the signalling unit, so the lighting component needs to be selected and installed separately as part of the system.\u003c\/p\u003e\u003ch6\u003eElectrical and on-board use\u003c\/h6\u003e\u003cp\u003eWith a 10 A rating at 250 V~, this push button can be used on onboard AC circuits within that limit, and it is also commonly used as a low-current control input for relays or contactors when you do not want the load current passing through the panel device. Because it is normally open and momentary, any function that needs to stay on typically relies on the controlled equipment, a relay, or a separate latching circuit.\u003c\/p\u003e\u003ch6\u003eTypical uses on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for interiors that already use Vimar Eikon modular switchgear and need a clean momentary control with an optional status indicator. It fits well for refits where you are standardizing panel controls across cabins, galley, nav station, and protected helm areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the front face clean with a soft cloth and avoid solvents that can haze plastics. In humid environments, place the device in a protected panel location and keep wiring compartments ventilated to reduce condensation around electrical terminations.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White Indicator \/ White","offer_id":51550335566070,"sku":"APL483261-V5","price":31.25,"currency_code":"USD","in_stock":true},{"title":"Green Indicator \/ White","offer_id":51550335598838,"sku":"APL483261-V6","price":31.25,"currency_code":"USD","in_stock":false},{"title":"White Indicator \/ Silver","offer_id":51550335631606,"sku":"APL483261-V1","price":35.25,"currency_code":"USD","in_stock":true},{"title":"White Indicator \/ Grey","offer_id":51550335664374,"sku":"APL483261-V3","price":32.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1269417_apl483261_jpeg.jpg?v=1787791264"},{"product_id":"apl214541","title":"Vimar Idea RJ45 R\u0026M IBM Adaptor, For R\u0026M Freenet and IBM Type C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16365 is an RJ45 adaptor for R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connectors within the IDEA modular range. It is used where a data connection needs to sit neatly in a switch or outlet position, with front label space that helps identify the run, outlet, or connected system.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this kind of adaptor makes sense at a navigation station, cabin communications point, helm console, or service panel where structured cabling is already part of the installation. The listed device depth is 21.0 mm on both variants, and the device height varies by colour, with 50.1 mm for the ivory version and 45.0 mm for the gray version.\u003c\/p\u003e\u003cp\u003eThis is an adaptor rather than a complete data outlet, so the main fit check is the connector family already used in the vessel and the matching IDEA mounting system around it. The open front and the absence of a hinged lid keep the port easy to access for patching, inspection, and relabelling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts RJ45 connector formats used in R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C installations\u003c\/li\u003e\n\u003cli\u003eMade for the Vimar IDEA modular range\u003c\/li\u003e\n\u003cli\u003eFront label space helps identify cabin outlets, network runs, or onboard systems\u003c\/li\u003e\n\u003cli\u003eNo hinged lid, so the connection point stays easy to reach and inspect\u003c\/li\u003e\n\u003cli\u003e21.0 mm device depth on both variants, which helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eAvailable in two colour finishes to match surrounding trim and switchgear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in two colour configurations.\u003c\/p\u003e\u003cp\u003eThe colour changes between variants. Both versions are RJ45 adaptors for the same R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connector families, both include label space, both have no hinged lid, and both are listed with a 21.0 mm device depth. The listed device height differs between the two colours.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16365.C.B, Color: Ivory. This lighter finish suits interior panels and trim where the surrounding hardware is off-white or cream in tone.\u003c\/li\u003e\n\u003cli\u003eVM16365.C, Color: Gray. This darker finish blends more easily with gray switch frames, utility panels, and technical spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm that the RJ45 connector format in your installation matches R\u0026amp;M Freenet system or IBM Advanced Connectivity System Type C. It is also worth checking that the mounting position on the boat uses the IDEA series format and that the back box or panel depth is suitable for a 21.0 mm device body.\u003c\/p\u003e\u003cp\u003eThis product is a good match for boats with structured data cabling in the cabin, chart table, or electronics console, especially where a clean panel finish and clear circuit identification matter as much as connector compatibility.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eBecause the front stays open and there is no lid, this adaptor is better suited to enclosed interior locations where the connection needs to stay accessible. It works well in places where crew or service technicians may need to patch a network lead, trace a cable run, or identify a connection quickly during refit and maintenance work.\u003c\/p\u003e\u003cp\u003eFor a tidy result, pair the adaptor with the correct surrounding module and keep the outlet label consistent with the vessel's network or systems map. That small detail saves time later when tracing data lines behind helm panels or cabin joinery.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550336450806,"sku":"APL214541-V8","price":14.29,"currency_code":"USD","in_stock":false},{"title":"Ivory","offer_id":51550336483574,"sku":"APL214541-V3","price":13.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364399_apl214541_jpeg.jpg?v=1787791321"},{"product_id":"apl486863","title":"Vimar Push Button Switch, For Refrigerator, 1-Pole NC, 250VAC, 60W, Pillar Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM00900 is a 1-pole normally closed (NC) push button rated 250 V AC and 60 W (0.24 A), with screw-type pillar terminals and a white finish with a matte surface.\u003c\/p\u003e\u003cp\u003eBecause it is normally closed, the circuit stays closed at rest and opens when you press the button. That behavior is commonly used for control and interlock functions on board, including refrigerator control circuits where a button press needs to interrupt the circuit.\u003c\/p\u003e\u003cp\u003eIt fastens with screws and uses a shallow 10 mm built-in depth, which helps when you are working in tight helm, galley, or locker panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, normally closed (NC) push button action\u003c\/li\u003e\n\u003cli\u003eRated 250 V AC, 60 W (0.24 A nominal)\u003c\/li\u003e\n\u003cli\u003eScrew-type pillar terminals for straightforward terminations\u003c\/li\u003e\n\u003cli\u003eScrew-mounted fastening with 10 mm built-in depth\u003c\/li\u003e\n\u003cli\u003eNon-illuminated button with no imprint for simple panel labeling\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matte surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eKeep the switched circuit within the 60 W rating at 250 V AC. For anything that draws more than that, use the button to switch a relay, contactor, or control input instead of feeding the load directly through the contacts.\u003c\/p\u003e\u003cp\u003eTerminate conductors fully under the screw terminals, then support the wiring so vibration or a tug on the cable cannot work the connection loose. Always isolate shore power and inverter feeds before opening an AC panel.\u003c\/p\u003e\u003ch6\u003eMaterials and placement\u003c\/h6\u003e\u003cp\u003eThe thermoplastic housing suits interior electrical spaces. Mount it where it stays out of washdowns and spray, and keep the back of the unit away from areas where condensation can collect.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis push button suits refits where you need a compact NC momentary contact for a refrigerator circuit, a safety interlock, or a service stop function in a small control box. It also works well when you are standardizing controls across a boat and want a consistent look in white.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550339629302,"sku":"APL486863","price":6.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826576_apl-mzk-qxw-iqh.jpg?v=1787791363"},{"product_id":"apl531538","title":"Vimar Plana 1P NC Pushbutton Mechanism, 10A 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14010.0 is a Plana-series 1-pole, normally-closed (NC) push button mechanism rated 10 A at 250 V AC, and it accepts a locator or indicator light when paired with a compatible light module. In NC operation the circuit is closed at rest and opens while you press the button, then returns to closed when released.\u003c\/p\u003e\u003cp\u003eThis mechanism is meant for flush mounting in Plana modular plates and is completed with a 1-, 2- or 3-module button. With an IP40 protection rating, it belongs in protected interior locations such as a cabin switch panel, nav station, or inside a console, not in areas exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole NC momentary contact: circuit opens only while the button is pressed\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A at 250 V AC for circuits that stay within the switch rating\u003c\/li\u003e\n\u003cli\u003eLightable mechanism that supports adding an indicator or locator light with a compatible light module\u003c\/li\u003e\n\u003cli\u003eCompletes with 1-, 2- or 3-module Plana button to match common modular panel layouts\u003c\/li\u003e\n\u003cli\u003eFlush-mounted form factor with snap-in fastening for quick installation in the support\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with glossy white finish (RAL 9003)\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, enclosed spaces behind a panel\u003c\/li\u003e\n\u003cli\u003eCompact size: 22.3 mm wide, 49.0 mm high, 38.7 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is part of the Vimar Plana modular system. It is intended to be finished with a matching Plana button and installed into the appropriate Plana mounting support and cover plate format for your panel.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003ePlan the function first: an NC push button is commonly used where the circuit should remain closed until someone presses the button, such as an alarm loop, interlock, or a control input that needs to open on command. For switching loads directly, confirm the load type and switching current are within the 10 A, 250 V AC rating and that your enclosure and wiring are suitable for the circuit on board.\u003c\/p\u003e\u003cp\u003eOnce installed, the engage snap fastening holds the mechanism in place. After a few trips, it is worth re-checking terminal tightness since boats see vibration and temperature swings.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits or new builds that already use Plana modules in interior panels and want a push button that keeps the panel tidy and stays easy to service. If the mounting spot is anywhere that regularly sees salt spray, rain, or washdowns, a sealed, higher-IP device is the better fit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face and surrounding plate clean and dry, and avoid aggressive solvents that can haze glossy plastics. In technical spaces, a quick periodic check for moisture ingress and corrosion at the terminals helps prevent intermittent faults.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550345134326,"sku":"APL531538","price":13.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826955_apl-r3s-vch-xev.jpg?v=1787791635"},{"product_id":"apl758266","title":"Vimar IDEA Series General Symbol Push Button, 1P NO, 10A, 250V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar IDEA Series is a range of 1P normally open push buttons with a general symbol for flush-mounted modular installations. Across the listed versions, the rating is 10 A at 250 V, the front size is 21.8 mm wide by 50.1 mm high, and the body clips into place with snap fastening.\u003c\/p\u003e\u003cp\u003eThis type of switch suits protected interior panels where the vessel is already built around the IDEA modular system. The housing is halogen-free thermoplastic with a matt finish and IP40 protection, and depth varies by version, with standard 1-module buttons at about 36.5 mm and the 2-module or luminous versions at 32.5 mm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO push button with general symbol, rated 10 A at 250 V\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular format with snap-in fastening for IDEA system installations\u003c\/li\u003e\n\u003cli\u003eCompact face size of 21.8 mm x 50.1 mm, with shallow depth that helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt surface and label area\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003cli\u003eRange includes grey or white finishes, 1-module and 2 reduced-module formats, plus luminous versions for signalling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes in three ways: colour, module format, and whether the button is arranged for illumination. Standard versions are available in grey or white as a 1-module device, and there are also grey and white versions that occupy 2 reduced modules.\u003c\/p\u003e\u003cp\u003eThe luminous versions are 1-module buttons in grey or white and are intended for use with a signalling unit, which is not included. The 10 A 250 V rating, single push-button operation, matt finish, halogen-free thermoplastic body, and IP40 protection stay the same across the listed versions.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good match when the boat or refit already uses Vimar IDEA supports, frames, and matching modules. Before ordering, check the panel layout for 1-module or 2 reduced-module spacing, confirm the finish you want, and verify the available depth behind the mounting point.\u003c\/p\u003e\u003cp\u003eBecause protection is IP40, it is better suited to protected cabin panels, interior helm areas, and technical spaces than to exposed deck locations or areas that see regular washdowns. For luminous versions, the signalling unit needs to be added separately during assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe built-in format keeps the front neat and works well where several controls need to sit in one modular frame. The general symbol keeps the function neutral, which is useful on vessels where the same switch style is used across cabins, service panels, and protected control positions.\u003c\/p\u003e\u003cp\u003eIt also makes sense for owners and yards replacing one worn module without changing the rest of an existing IDEA installation. Matching the module width and colour is usually the main point to confirm before fitting.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey\/Indicator \/ 1 Module","offer_id":51550348640502,"sku":"APL758266-7","price":18.19,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Modules","offer_id":51550348673270,"sku":"APL758266-1","price":22.5,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module","offer_id":51550348706038,"sku":"APL758266-6","price":15.59,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Modules","offer_id":51550348738806,"sku":"APL758266-0","price":23.39,"currency_code":"USD","in_stock":false},{"title":"White\/Indicator \/ 1 Module","offer_id":51550348771574,"sku":"APL758266-2","price":17.5,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1 Module","offer_id":51550348804342,"sku":"APL758266-9","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828607_apl758266.jpg?v=1787791785"},{"product_id":"apl182765","title":"Vimar Eikon Socket Outlet, Italian Standard P17\/11, 2P+E, 16A, 250V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20203 SICURY P17\/11 socket outlet is a 2P+E, 16 A, 250 V flush-mounted outlet insert for Italian standard P17\/11 AC installations. It is a one-module device with a compact 22.3 x 49 x 34.5 mm body, which makes it a straightforward fit where panel space is limited and the installation uses the Eikon modular format.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matte finish, and wiring is made through screw terminals. SICURY contact protection adds an internal shutter that closes when the plug is removed. With an IP20 rating, this outlet belongs in a protected interior location such as a cabin panel, galley bulkhead, or chart table installation, not in open deck, cockpit, or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E Italian type Bipasso outlet in P17\/11 format\u003c\/li\u003e\n\u003cli\u003eRated 16 A at 250 V, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003eOne-module insert for flush-mounted Eikon installations\u003c\/li\u003e\n\u003cli\u003eScrew terminal connection for fixed wiring\u003c\/li\u003e\n\u003cli\u003eSICURY contact protection with shuttered outlet openings\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte finish\u003c\/li\u003e\n\u003cli\u003eIP20 protection for dry interior mounting points\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in four color configurations within the same Eikon 20203 family.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical format stays the same: 2P+E Italian standard P17\/11, 16 A, 250 V, 50 to 60 Hz, one module, flush mounting, screw terminals, halogen-free thermoplastic construction, IP20 protection, and 22.3 x 49 x 34.5 mm dimensions. The changes between variants are finish and, in the red version, application marking.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20203.B: Color White. This version keeps the outlet in a light Eikon palette for interiors that use white plates and trim.\u003c\/li\u003e\n\u003cli\u003eVM20203.N: Color Silver. This version uses a silver finish with a lacquered matte surface that matches Eikon Next silver hardware.\u003c\/li\u003e\n\u003cli\u003eVM20203.R: Color Red. This version is marked for dedicated supply lines, which helps separate a specific AC circuit from general-purpose outlets.\u003c\/li\u003e\n\u003cli\u003eVM20203: Color Grey. This version keeps the outlet in the darker Eikon palette and gives a lower-contrast look on dark panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and placement\u003c\/h6\u003e\u003cp\u003eCheck both the plug standard and the modular system before ordering. This insert is for Italian standard P17\/11 outlets and uses the Eikon one-module format, so it suits refits where the boat already has that layout in place.\u003c\/p\u003e\u003cp\u003eIP20 means it should stay in a protected interior space. It works for cabin, galley, chart table, and other enclosed AC points, but it is not the right choice for open cockpit panels, deck lockers, or other areas that see spray or washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550367351030,"sku":"APL182765-V7","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550367383798,"sku":"APL182765-V6","price":34.5,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550367416566,"sku":"APL182765-V5","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51550367449334,"sku":"APL182765-V9","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363536_apl182765_jpeg.jpg?v=1787792220"},{"product_id":"apl399782","title":"Vimar Eikon SICURY French Standard Socket Outlet, 2P+E 16A 250V, 2-Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20212 is a French-standard 2P+E SICURY socket outlet rated 16 A at 250 V~ in a 2-module format for flush mounting. It is a single outlet for 50-60 Hz AC systems with enhanced contact protection and an IP20 rating, so it belongs in dry interior areas on board.\u003c\/p\u003e\u003cp\u003eOn a boat this is typically used where you want a familiar French plug point on a 230 V distribution fed from shore power, an inverter, or an onboard generator. It works well at a nav station, in a cabin, or in the saloon, where the outlet is protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe body is thermoplastic with a matt surface finish and it is halogen free. Allow for the device footprint behind the plate: 44.8 mm wide, 49.0 mm high, and 35.9 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFrench 2P+E socket format for Type E plugs, 1 outlet in a 2-module Eikon device size.\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 16 A, 250 V~ AC, 50-60 Hz.\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection to reduce accidental contact with live parts.\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation for clean integration in interior panels and bulkheads.\u003c\/li\u003e\n\u003cli\u003eIP20 rating, intended for protected locations away from direct water spray.\u003c\/li\u003e\n\u003cli\u003eThermoplastic body, halogen free, with a matt finish.\u003c\/li\u003e\n\u003cli\u003eLabel space on the front for circuit identification.\u003c\/li\u003e\n\u003cli\u003eOffered with either screwed terminals or push-in clamp (screwless) terminals depending on variant.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in multiple configurations to match the look of your interior and the way you prefer to wire the circuit.\u003c\/p\u003e\u003cp\u003eAcross the range, the visible color varies (Grey, White, Silver), along with the front style (No Cover, With Cover, or Flat Design). Installation also varies between versions that use screwed terminals and versions that use push-in clamp (screwless) terminals.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a flush-mounted, modular device, so it should be fitted into a suitable recessed box or mounting solution and aligned to the rest of the Eikon modular layout. Before wiring, isolate the AC supply at the main breaker and verify the circuit is de-energized.\u003c\/p\u003e\u003cp\u003eAfter installation, check polarity and that the protective earth is continuous back to the vessel system. In marine AC systems, this outlet should be protected by an RCD or equivalent residual-current device upstream, and the circuit should be sized appropriately for a 16 A receptacle.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis product is for 250 V~ AC distribution, not for 12 V or 24 V DC. It is meant for French-standard plugs, so confirm your onboard appliances and adapters match the socket format you are installing.\u003c\/p\u003e\u003cp\u003eBecause it is a 2-module Eikon device, confirm your mounting layout, frames, and plates are set up for a 2-module outlet position, and that you have at least 35.9 mm of clear depth behind the finished surface for the device body and cable bend radius.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners refitting cabins, saloons, and nav areas where you want a French receptacle in a modular Eikon layout and the outlet sits in a protected, dry location. For galleys, heads, or anywhere with frequent moisture, place it where it is sheltered and consider a covered front style for an extra physical barrier at the face.\u003c\/p\u003e\u003cp\u003eAs with any onboard AC outlet, inspect periodically for heat discoloration, loose wiring, and any signs of corrosion from airborne salt, especially if the boat sees heavy ventilation or doors are often left open at the dock.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"With Cover \/ Grey \/ Screws","offer_id":51550390616310,"sku":"APL399782-V3","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ Silver \/ Screwless","offer_id":51550390649078,"sku":"APL399782-V12","price":36.75,"currency_code":"USD","in_stock":false},{"title":"No Cover \/ Silver \/ Screws","offer_id":51550390681846,"sku":"APL399782-V7","price":31.71,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ Silver \/ Screws","offer_id":51550390714614,"sku":"APL399782-V2","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ White \/ Screwless","offer_id":51550390747382,"sku":"APL399782-V11","price":33.75,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ Grey \/ Screwless","offer_id":51550390780150,"sku":"APL399782-V1","price":36.0,"currency_code":"USD","in_stock":true},{"title":"With Cover \/ White \/ Screwless","offer_id":51550390812918,"sku":"APL399782-V75","price":36.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Grey \/ Screwless","offer_id":51550390845686,"sku":"APL399782-V6","price":28.0,"currency_code":"USD","in_stock":true},{"title":"With Cover \/ Silver \/ Screwless","offer_id":51550390878454,"sku":"APL399782-V8","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ Grey \/ Screwless","offer_id":51550390911222,"sku":"APL399782-V10","price":33.75,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ White \/ Screws","offer_id":51550390943990,"sku":"APL399782-V9","price":36.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ White \/ Screwless","offer_id":51550390976758,"sku":"APL399782-V29","price":28.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Silver \/ Screwless","offer_id":51550391009526,"sku":"APL399782-V0","price":30.5,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Grey \/ Screws","offer_id":51550391042294,"sku":"APL399782-V4","price":28.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ White \/ Screws","offer_id":51550391075062,"sku":"APL399782-V5","price":29.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312308_apl399782.jpg?v=1787793097"},{"product_id":"apl289276","title":"Vimar Plana 2P+E French SICURY Socket Outlet, 16A, 250V, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2P+E French SICURY outlet range for flush-mounted AC installations that use the French socket format. It is rated 16 A at 250 V, works at 50 to 60 Hz, and uses a 2-module layout, which makes it easy to match with other Plana devices in a finished interior.\u003c\/p\u003e\u003cp\u003eThe body is made from halogen-free thermoplastic with a glossy surface, and the device measures 44.8 x 49.0 x 35.9 mm. Enhanced contact protection is built in, and the IP20 rating makes this a fit for protected indoor spaces rather than exposed areas on deck.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this outlet suits cabins, saloons, galleys, and other dry accommodation spaces where a French standard receptacle is needed and the installation is already based around Vimar Plana components.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFrench standard 2P+E outlet rated 16 A, 250 V AC, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003e2-module Plana format for flush-mounted installations\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection built into the outlet\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a glossy finish\u003c\/li\u003e\n\u003cli\u003eCompact 44.8 x 49.0 x 35.9 mm size for panel and box clearance checks\u003c\/li\u003e\n\u003cli\u003eRange includes white or silver finish, versions with or without cover, and screwed or screwless terminal options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eAcross the listed configurations, the differences are finish, front cover, and terminal style. The range is available in white or silver, with or without a cover, and with either screwed terminals or screwless push-in clamp terminals.\u003c\/p\u003e\u003cp\u003eOne white version adds antibacterial treatment. Across the range, the core outlet format stays the same: 2P+E French standard, 16 A, 250 V, 50 to 60 Hz, flush-mounted, and built as a 2-module device.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is part of the Vimar Plana device family, so it is intended for Plana modular installations and a 2-module opening. The compact body helps when checking available depth behind cabin liners, furniture panels, or interior bulkheads.\u003c\/p\u003e\u003cp\u003eBecause protection is IP20, it belongs in dry interior locations. It is not intended for cockpits, exterior helm stations, wet lockers, or other places that see spray, washdowns, or direct weather exposure.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eScrewed-terminal versions use conventional conductor termination, while the screwless versions use push-in clamp terminals. Versions with cover add a protective front flap over the socket face when the outlet is not in use.\u003c\/p\u003e\u003cp\u003eThis range is a good match for boats already laid out with French standard AC outlets and for refit work where the goal is to keep the same Vimar Plana look across switches, sockets, and other interior electrical devices.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Screwless \/ No Cover","offer_id":51550396186870,"sku":"APL289276-8","price":15.75,"currency_code":"USD","in_stock":false},{"title":"White \/ Screwless \/ With Cover","offer_id":51550396219638,"sku":"APL289276-5","price":20.0,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screws \/ No Cover","offer_id":51550396252406,"sku":"APL289276-0","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White\/Antibacterial \/ Screws \/ No Cover","offer_id":51550396285174,"sku":"APL289276-1","price":17.25,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screws \/ With Cover","offer_id":51550396317942,"sku":"APL289276-7","price":24.75,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screwless \/ With Cover","offer_id":51550396350710,"sku":"APL289276-9","price":24.75,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screwless \/ No Cover","offer_id":51550396383478,"sku":"APL289276-3","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Screws \/ No Cover","offer_id":51550396416246,"sku":"APL289276-4","price":16.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Screws \/ With Cover","offer_id":51550396449014,"sku":"APL289276-2","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828827_apl289276.jpg?v=1787793221"},{"product_id":"apl589135","title":"Vimar ARKÉ F Type Female Socket Connector, 2400 MHz, IEC 60169-24","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series is a range of F-type female socket connectors used to terminate coaxial TV and satellite lines in a fitted wall plate or panel. Each version uses an IEC 60169-24 F-type female connection and handles frequencies up to 2400 MHz.\u003c\/p\u003e\u003cp\u003eThis is a single-outlet end socket with support for remote power supply through the coax line. The insert body measures 22.2 x 49 x 30 mm and mounts by snap engagement, which helps keep the installation neat inside a compatible ARKÉ layout.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this type of insert fits best in protected spaces such as cabins, saloons, and helm consoles where a coax feed needs a clean finished outlet instead of a loose cable end. It is a practical match for onboard TV and satellite distribution where an F-type male connector is already part of the wiring plan.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIEC 60169-24 F-type female coaxial connection for TV and satellite signal points\u003c\/li\u003e\n\u003cli\u003eRated for frequencies up to 2400 MHz\u003c\/li\u003e\n\u003cli\u003eSingle-outlet end socket format\u003c\/li\u003e\n\u003cli\u003eSuitable for remote power supply through the coax line\u003c\/li\u003e\n\u003cli\u003eSnap-mount engagement for quick fitting into the ARKÉ device system\u003c\/li\u003e\n\u003cli\u003e22.2 x 49 x 30 mm insert size across the listed finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple finish configurations within the same connector format.\u003c\/p\u003e\u003cp\u003eAcross the listed versions, the connector type, frequency limit, single-outlet layout, remote power compatibility, snap-mount format, and body size remain the same. What changes between variants is the visible finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19318 - Grey, RAL 7015. This version suits installations built around darker grey ARKÉ trim and keeps the outlet visually discreet on bulkheads and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM19318.M - Metal, aluminium tone, RAL 9007. This version changes the visible look to a metallic finish while keeping the same connector layout and installation format.\u003c\/li\u003e\n\u003cli\u003eVM19318.B - White, RAL 9016. This version works well where the surrounding trim and panel hardware are finished in white and a lighter face is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis insert is part of the ARKÉ range, so it should be matched with the correct system components for the final installation. The coax line connects through an F-type male connector, which should be checked before ordering if the boat is being refitted from another connector style.\u003c\/p\u003e\u003cp\u003eBecause this is a flush device insert rather than a standalone deck fitting, it makes the most sense where the coax run is already routed behind a finished panel. That is usually the case in entertainment panels, cabin joinery, and helm stations with built-in electronics.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis socket is intended for coaxial signal runs that use the F-type format and is commonly used for TV and satellite distribution. It is a sensible choice for boats that need a tidy signal outlet at the point of use without changing the appearance of the surrounding electrical accessories.\u003c\/p\u003e\u003cp\u003eIt is especially relevant for refit work where matching the finish of the interior switches and sockets matters, but the signal side still needs a proper high-frequency coax connection.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550397989110,"sku":"APL589135-8","price":16.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550398021878,"sku":"APL589135-5","price":16.0,"currency_code":"USD","in_stock":false},{"title":"Metal","offer_id":51550398054646,"sku":"APL589135-0","price":17.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828204_apl589135.jpg?v=1787793298"},{"product_id":"apl542577","title":"Vimar 8000 Series Cord-Operated Push Button, 1P NO, 10A 250V, 1.5 m Cord, IP40, White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08270 is a 1-pole, normally open cord-operated momentary push button rated 10 A at 250 V~ for flush-mounted installations. It gives you a quick pull-to-activate contact, with a 1.5 m cord so the control point can be reached from a berth, locker opening, heads area, or any spot where a standard wall button is awkward.\u003c\/p\u003e\u003cp\u003eThis is an IP40 device, so it belongs in dry, protected interiors rather than exposed cockpits or washdown zones. On board it is typically used as a momentary control input for a relay, controller, bell, or signaling circuit where you want the circuit to close only while the cord is pulled.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt white finish (RAL 9001) and includes a label area, which helps keep panels and service points readable when multiple controls are grouped together.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMomentary 1P\/NO contact (circuit closes only while operated)\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A, 250 V~\u003c\/li\u003e\n\u003cli\u003e1.5 m operating cord for remote, easy-to-reach activation\u003c\/li\u003e\n\u003cli\u003eFlush-mounted device with snap (engage) fastening\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for sheltered interior locations\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt white finish (RAL 9001)\u003c\/li\u003e\n\u003cli\u003eOverall size: 22.00 mm wide, 50.10 mm high, 35.00 mm deep\u003c\/li\u003e\n\u003cli\u003eLabel space on the front for clear circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan for a flush-mount position with enough clearance behind the surface for the 35.00 mm device depth and for bending the conductors without stress. If you are mounting into joinery or a thin liner, make sure the backing structure supports the module so it does not flex when the cord is pulled.\u003c\/p\u003e\u003cp\u003eRoute the cord so it moves freely and does not chafe on edges or snag on gear. On a boat, that usually means keeping it away from hatch corners, locker lids, and moving seat bases, and leaving a clean path that stays predictable underway.\u003c\/p\u003e\u003ch6\u003eElectrical and onboard use\u003c\/h6\u003e\u003cp\u003eWire it as a normally open momentary contact in the control circuit you are switching. For DC onboard systems, it is often used to trigger a relay or control input rather than switching heavy DC loads directly, which helps keep arcing and heat out of the switch location.\u003c\/p\u003e\u003cp\u003eConfirm the circuit load and protection match the device rating, and use marine-appropriate conductors, terminations, and strain relief for vibration. If the control is near damp spaces, place it where it stays dry and where condensation or drips cannot run into the module.\u003c\/p\u003e\u003ch6\u003eWhere it works best on board\u003c\/h6\u003e\u003cp\u003eThis style of pull-cord momentary button makes sense in cabins, heads compartments, closets, and under-counter spaces where you want a simple, reachable call or trigger point. It is also useful at service access points where you want a quick, labeled momentary control without adding a bulky panel switch.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the front surface with a lightly damp cloth and avoid harsh solvents that can haze plastics. Periodically check that the cord runs smoothly and that the mounting remains tight after seasons of vibration and temperature cycling.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550399201526,"sku":"APL542577","price":27.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826840_apl-b7x-qgc-uhr.jpg?v=1787793394"},{"product_id":"apl854976","title":"Vimar Eikon Neutral Double Indicator Unit, 250V, IP40, 1-Module, Flush-Mount, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon neutral double indicator unit is a 1-module flush-mount insert for two signalling units, with neutral diffusers and a 250 V nominal rating. It is supplied without the signalling unit, so it is the front indicator body rather than a complete illuminated assembly.\u003c\/p\u003e\u003cp\u003eThis range fits Eikon modular switching layouts where a compact visual indicator is needed on a panel, bulkhead, or interior control point. The housing is thermoplastic, halogen-free, and finished in matt plastic, with an IP40 rating and snap-in fastening for straightforward integration into the matching support and cover system.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in protected interior locations such as cabin switch panels, technical spaces, or enclosed helm areas where you want a clean indicator position within a Vimar Eikon installation. Because it is IP40, it is better suited to dry or lightly protected spaces rather than exposed deck or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDouble indicator unit format for 2 signalling units with neutral diffusers\u003c\/li\u003e\n\u003cli\u003e1-module Eikon device body for compact use in modular switch panels\u003c\/li\u003e\n\u003cli\u003e250 V nominal rating for systems built around this voltage class\u003c\/li\u003e\n\u003cli\u003eFlush-mounted design with snap fastening for a tidy panel finish\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eSupplied without signalling unit, which matters when matching the insert to the rest of the switching assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three finish options within the same Eikon neutral double indicator unit format.\u003c\/p\u003e\u003cp\u003eThe variant change is the visible finish and colour. The functional layout remains the same across the range where confirmed, including the 1-module body, double indicator format for 2 signalling units, flush mounting, IP40 protection, and 250 V nominal rating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20388.B, white. This version suits switch panels and interior trim where a lighter finish is already used across the cabin or service area.\u003c\/li\u003e\n\u003cli\u003eVM20388.N, silver. This finish gives the indicator a more metallic look and works well where the surrounding Eikon hardware uses the Next silver style.\u003c\/li\u003e\n\u003cli\u003eVM20388, grey. This option keeps the same function with a darker neutral appearance that blends more easily into grey switch surrounds and technical panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis insert is made for flush mounting and uses snap engagement, so fit depends on using the correct Eikon support and finishing parts around it. It occupies one module position and is intended for installations already built around the Vimar modular switching system.\u003c\/p\u003e\u003cp\u003eBecause the light source is not included, the assembly should be planned as part of the full switch and indicator setup rather than as a stand-alone part. That is the main point to check before ordering, especially when replacing a single insert in an existing panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refit and new-build interiors that use Vimar switching in accommodation spaces, enclosed helm stations, or utility areas where panel appearance matters as much as fit. It is especially useful when you need a double indicator position without giving up extra module space.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550399496438,"sku":"APL854976-V0","price":28.33,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550399529206,"sku":"APL854976-V8","price":27.25,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550399561974,"sku":"APL854976-V9","price":32.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363810_apl854976_jpeg.jpg?v=1787793415"},{"product_id":"apl324826","title":"Vimar By-me Plus PLANA 1-Module Relay Actuator, 6A, 120-230V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series 1 Module Relay Actuator is a flush-mounted By-me Plus bus actuator with a 6 A change-over relay output for 120-230 V circuits. It takes one module position in the Plana range, includes LED indication, and comes with bus connection.\u003c\/p\u003e\u003cp\u003eOn board, this type of module fits best behind interior control points where space is limited and the installation already uses the Vimar By-me Plus system. Its IP40 rating makes it more appropriate for cabins, saloons, enclosed helm areas, and other sheltered spaces than for open deck or washdown locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 A change-over relay output for 120-230 V circuits within the device rating\u003c\/li\u003e\n\u003cli\u003eFlush-mounted format that takes one module position in a Plana installation\u003c\/li\u003e\n\u003cli\u003eWorks on the Vimar By-me Plus bus and includes bus connection\u003c\/li\u003e\n\u003cli\u003eLED indication on the module for status visibility at the panel\u003c\/li\u003e\n\u003cli\u003eSuitable for C-loads with one switching contact\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two finish options within the same relay actuator format.\u003c\/p\u003e\u003cp\u003eThe finish changes between variants. The electrical rating, mounting method, module width, bus connection, LED indication, C-load suitability, and IP40 protection remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14534: White finish. This version keeps a white look that matches white Plana switch positions and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM14534.SL: Silver finish. This version keeps the same actuator specification with a silver front for installations that use silver Plana trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis actuator is made for flush mounting and takes one module position, which helps when panel space is tight. It is a bus device rather than a stand-alone wall switch, so it belongs in a Vimar By-me Plus installation with the right programming and system layout.\u003c\/p\u003e\u003cp\u003eThere is no local hand operation on the module. That matters in service areas or technical spaces where direct manual override at the device may be part of the design, because control is expected to come through the bus system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit suits boats that already use Vimar Plana controls and need a compact relay point for an AC circuit inside the accommodation or other enclosed areas. It is a better fit for interior joinery, protected helm panels, or service spaces than for exposed mounting points.\u003c\/p\u003e\u003cp\u003eDifferent phases are not connectable on this actuator, so that point should be checked early in a refit or new installation when matching the device to the boat's distribution layout and the function assigned in the control system.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550410735862,"sku":"APL324826-1","price":153.86,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550410768630,"sku":"APL324826-8","price":156.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827772_apl324826.jpg?v=1787793959"},{"product_id":"apl624008","title":"Vimar Plana 3-Position 2-Button 2-Way Switch, 2P, 10AX, 250V, Central OFF Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2-button 2P 10AX 250 V two-way switch range with 6 terminals, directional arrows, and a central OFF position. It is a flush-mounted built-in switch for Plana modular installations where a directional function needs a clear stop position in the middle.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this style of switch makes sense in protected cabin and panel locations where a clean built-in finish matters and the circuit needs a center-off layout. The body is thermoplastic and halogen-free, the protection rating is IP40, and the switch also supports self-ballasted lamp loads up to 100 W.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-button 2P 10AX switch rated at 250 V with a 6-terminal connection layout\u003c\/li\u003e\n\u003cli\u003eCentral OFF position with directional arrows for circuits that need controlled up and down or forward and reverse style switching\u003c\/li\u003e\n\u003cli\u003eFlush-mounted built-in format with snap fastening for Plana series installations\u003c\/li\u003e\n\u003cli\u003eThermoplastic, halogen-free construction with IP40 protection for dry interior locations\u003c\/li\u003e\n\u003cli\u003eGlossy finish options in white or silver to match the surrounding Plana trim\u003c\/li\u003e\n\u003cli\u003eSupports self-ballasted lamp loads up to 100 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis switch is offered in two finish options within the same Plana configuration.\u003c\/p\u003e\u003cp\u003eAcross both variants, the switching layout, 10AX 250 V rating, 6-terminal connection, central OFF position, and flush-mount format stay the same. The visible color and surface treatment change between the two versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14060.SL, Color Silver. Silver finish with a glossy lacquered surface, similar to RAL 9006. It fits spaces where the switch is meant to stand out a little more against darker or metallic trim.\u003c\/li\u003e\n\u003cli\u003eVM14060, Color White. White finish with a glossy untreated surface, similar to RAL 9003. It blends more easily into light cabin liners, accommodation areas, and other interior panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a built-in switch body with snap fastening, so it should be matched to the correct Plana support and finishing parts already used in the panel or bulkhead. Before ordering, check the module layout and confirm rear clearance for the device depth, which is about 42.5 mm on the white version and about 42.9 mm on the silver version.\u003c\/p\u003e\u003cp\u003eBecause the protection level is IP40, it belongs in enclosed interior spaces rather than exposed helm faces, open cockpit surfaces, or washdown areas. It is a sensible fit for refit work on boats that already use Vimar Plana modules and want the same look across cabins and control points.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis switch suits boats that use modular interior fittings and need a center-off directional switch in accommodation spaces, enclosed utility areas, or other protected locations. It is also a straightforward match for projects where the finish needs to stay consistent with other Plana switches and outlets already installed on board.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550430200054,"sku":"APL624008-3","price":32.49,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550430232822,"sku":"APL624008-8","price":43.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827554_apl624008.jpg?v=1787794604"},{"product_id":"apl444410","title":"Vimar SICURY S11 to P30 Socket Adapter, 250V, 10A Plug, 16A Outlet","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar SICURY Series is a 1-way plug adaptor that converts an Italian S11 2P+E 10 A plug connection to an Italian P30 2P+E 16 A socket outlet. It is rated 250 V~ with a 10 A current rating and a maximum load of 1500 W, so it is meant for appliances and accessories that stay within that limit.\u003c\/p\u003e\u003cp\u003eOn board, this adaptor makes sense where the boat or dockside supply side is fitted for an S11 connection but the equipment or extension lead needs a P30 outlet format. The P30 outlet uses lateral and central earth contacts, which matters when you are matching it to existing Italian standard plugs and socket layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eS11 2P+E 10 A plug on the supply side and P30 2P+E 16 A socket outlet on the load side\u003c\/li\u003e\n\u003cli\u003e250 V~ adaptor with 10 A current rating and 1500 W maximum load\u003c\/li\u003e\n\u003cli\u003e1-way format for single-device connection in portable or plug-in installations\u003c\/li\u003e\n\u003cli\u003eP30 outlet with lateral and central earth contacts for Italian standard compatibility\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white to match surrounding outlets, panels, or interior trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eThe listed variants differ by finish color. The connection format, electrical rating, and outlet style remain the same across both options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM00302.B: Color White. The lighter finish blends more quietly into white panels, cabin trim, or lighter interior spaces.\u003c\/li\u003e\n\u003cli\u003eVM00302: Color Black. The darker finish works with black switchgear, darker fascias, or console areas where a darker outlet is already in place.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adaptor is for Italian standard plug and socket layouts. Check that the supply side on the vessel, dock, or service area accepts an S11 plug and that the equipment side needs a P30 outlet before ordering. It is a practical match for boats with Italian wiring devices in cabins, galleys, or utility spaces where portable appliances, chargers, or small equipment move between outlets.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe adaptor is a simple plug-in accessory, so it is useful where you need to bridge two Italian outlet formats without changing the installed socket. Keep the connected load within the 1500 W limit and use it in the same way you would any onboard mains accessory, with attention to the vessel electrical setup and the location where it will be used.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black","offer_id":51550443962614,"sku":"APL444410-V2","price":5.2,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550443995382,"sku":"APL444410-V1","price":5.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1313934_apl444410.webp?v=1787794909"},{"product_id":"apl617761","title":"Vimar Idea Netsafe RJ45 Phone Jack, 8\/8, Screw Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Net Safe 16337 is an RJ45 phone jack module with an 8-position, 8-conductor (8\/8) connection and rear screw terminals.\u003c\/p\u003e\u003cp\u003eIt is an unshielded (not screened) jack intended for low-voltage data and telecommunication runs where you want an outlet that sits flush in a Vimar IDEA modular plate, such as at a nav station, desk, or cabin bulkhead.\u003c\/p\u003e\u003cp\u003eThe rear terminals suit round cable and terminate under screws, so you can land conductors without a punch-down tool. It is not suitable for flat cable, litz wire conductors, or solid-core conductors.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRJ45 8(8) jack for 8-position, 8-conductor terminations\u003c\/li\u003e\n\u003cli\u003eRear screw terminals for field wiring without a punch-down tool\u003c\/li\u003e\n\u003cli\u003eUnshielded connector for standard voice and data cabling where shielding is not required\u003c\/li\u003e\n\u003cli\u003eSuitable for round cable entry; not intended for flat cable or solid-core conductors\u003c\/li\u003e\n\u003cli\u003eNo special tool required for termination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis module is offered in two colour options to match different Vimar plate and trim finishes.\u003c\/p\u003e\u003cp\u003eThe visible face colour is what changes across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16337.B: Color White. Keeps the outlet visually consistent with white Vimar frames and cover plates.\u003c\/li\u003e\n\u003cli\u003eVM16337: Color Gray. Matches gray-toned plates and adjacent devices for a uniform panel finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module into a compatible Vimar IDEA support and cover plate, then route the cable into the back box with enough slack to work comfortably on the terminals. Strip the conductors cleanly, land each conductor under the correct screw terminal, and keep the jacket supported so movement in the wall does not pull on the terminations.\u003c\/p\u003e\u003cp\u003eOn board, keep low-voltage comms cabling separated from high-current DC runs where practical, especially near battery banks, inverters, and engine harnesses. For best longevity, place the outlet in a dry interior area where the plug and cord will not be exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a modular connector for Vimar IDEA system installations and is commonly used as a phone or general RJ45 outlet point within structured wiring. It is a good match for refits where the vessel already uses Vimar IDEA plates and you need an RJ45 point for a handset line or an onboard network connection. Confirm the plate system and module format on your boat before ordering so it seats correctly in the existing frame.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550446584054,"sku":"APL617761-V8","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550446616822,"sku":"APL617761-V4","price":41.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364918_apl617761_jpeg.jpg?v=1787794979"},{"product_id":"apl101755","title":"Vimar 8000 Series 1-Way Rocker Switch, 1-Pole, 16AX, 250V, Beige","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08001 is a 1-pole, 1-way switch module for Vimar 8000 Series installations, rated 16 AX at 250 V~ for standard on-off control from a single location.\u003c\/p\u003e\u003cp\u003eIt is commonly used on boats for interior circuits where you want a clean modular look, such as cabin lighting panels, heads, or helm-side switch banks that sit behind a cover plate. The switch is also rated for self-ballasted lamps up to 200 W, which matters when you are switching modern electronic loads rather than a simple resistive lamp.\u003c\/p\u003e\u003cp\u003eWith an IP40 rating, it belongs in protected interior spaces, not in places that see direct spray or washdowns. The beige matte finish is similar to RAL 9001, which helps match classic yacht interiors and existing 8000 Series trims.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, 1-way on-off switching for control from one location\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating for AC circuits that include electronic or self-ballasted loads\u003c\/li\u003e\n\u003cli\u003eSupports self-ballasted lamps up to 200 W\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular format sized as a single 8000 Series module\u003c\/li\u003e\n\u003cli\u003eSnap-in fastening that suits multi-module frames and cover plates\u003c\/li\u003e\n\u003cli\u003eScrewed terminals for solid connections where vibration is a factor\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior, sheltered mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a single-module device with a face size that suits 8000 Series grids and plates. Check clearance behind the mounting surface, especially in thin bulkheads or instrument panels, since wiring bend radius can be the limiting factor more than the module itself.\u003c\/p\u003e\u003cp\u003eFor a neat finish on board, mount it where the front is protected from knocks and moisture, and where the rear of the switch stays dry and ventilated. If you are replacing an older switch, confirm the module system and frame style match the 8000 Series layout before pulling the old wiring.\u003c\/p\u003e\u003ch6\u003eElectrical and system notes\u003c\/h6\u003e\u003cp\u003eThis switch is rated for 250 V~ AC circuits. If your boat is primarily 12V or 24V DC for lighting, use a DC-rated switch for those loads rather than assuming an AC rating will translate.\u003c\/p\u003e\u003cp\u003eBecause it is a 1-pole switch, it opens a single conductor. For marine AC systems, switching practices depend on the circuit and local standards, so wire it in a way that matches your vessel’s electrical scheme and protection devices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis module is a good match for refits and new builds that already use Vimar 8000 Series devices and want consistent switching across cabins, salon, and service areas. It also makes sense when you are standardizing switch feel and appearance across a panel with mixed functions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the front with a lightly damp cloth and avoid solvents that can haze matte plastics. If the switch is installed in a high-vibration area, it is worth rechecking terminal tightness during routine electrical inspections with power isolated.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550515003638,"sku":"APL101755","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826820_apl-90c-brw-mge.jpg?v=1787795761"},{"product_id":"apl621360","title":"Vimar Eikon Push Button Mechanism, For 1-3 Module Button, 1P NO, 10A 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20008.0 is a 1-pole, normally-open (momentary) push-button mechanism rated 10 A at 250 V~ and built to accept an optional locator\/indicator light. It is a 1-module device meant for flush mounting, so it sits cleanly in a console, cabin bulkhead panel, or electrical backbox where you want a push action that returns when released.\u003c\/p\u003e\u003cp\u003eThis mechanism measures 22.3 mm wide, 49.0 mm high, and 34.6 mm deep, and it carries an IP40 protection rating for protected interior locations. The body is thermoplastic and halogen-free, with a matt anthracite finish (similar to RAL 7024) and a small label area for circuit identification.\u003c\/p\u003e\u003cp\u003eIt is supplied as the mechanism only and is intended to be completed with a compatible 1-, 2-, or 3-module button from the same system, depending on the plate layout you are building.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1P NO momentary push-button action for control functions that should not latch on\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eElectrical rating: 10 A at 250 V~\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLightable mechanism for use with compatible illuminated button\/lighting accessories\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1-module format with flush-mount installation and engage (snap) fastening\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP40 protection for dry, protected interior panels and enclosures\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThermoplastic, halogen-free construction with matt anthracite finish (similar to RAL 7024)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompact body: 22.3 mm (W) x 49.0 mm (H) x 34.6 mm (D)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLabel space\/information surface for clear circuit marking at the panel\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting depth before you cut the panel or select the backbox, since the mechanism body is 34.6 mm deep. It is designed to snap into a compatible modular support, then be finished with the correct button and cover plate for your Eikon layout. Once installed, keep the labeling area visible so the function is obvious at a glance at the helm or inside the cabin.\u003c\/p\u003e\u003cp\u003eFor marine wiring, treat it like any other interior switching device: keep it out of direct spray, route conductors with strain relief, and use proper protection upstream for the circuit you are controlling. This type of momentary contact is commonly used to trigger relays, contactors, horns, or control inputs where you want a deliberate press-and-release action.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an Eikon-format mechanism intended to be paired with a matching 1-, 2-, or 3-module button, depending on the button style and the plate configuration. The IP40 rating makes it a better match for cabin and console interiors than exposed cockpit locations, unless it is installed inside a suitable protective enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits boats that use modular wall-plate style controls and want a clean momentary push point for functions such as a signal, reset, or a relay-driven load. It is also a good match when you want the option of a lighted button position for low-light operation in cabins or inside a covered helm console.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550578606326,"sku":"APL621360","price":15.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353694_apl621360_jpeg.jpg?v=1787796736"},{"product_id":"apl697543","title":"Vimar Eikon Vintage 2P 2-Way Push Button, 10A, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON Series is a range of 2P 2-way push buttons rated at 10 A for flush-mounted installations in the Vintage finish line. These switches use a two-pole layout with six terminals and a central OFF position, which makes them suitable for interior control points where the switch face is part of the overall finish of the space.\u003c\/p\u003e\u003cp\u003eEach version uses built-in mounting with snap fastening and includes a label space on the device. The body measures 22.30 mm wide, 48.80 mm high, and 63.10 mm deep, which is worth checking when space is limited behind bulkheads, cabinetry, or finished interior panels on board.\u003c\/p\u003e\u003cp\u003eThis type of switch makes the most sense in protected interior areas on yachts and other vessels that already use Vimar EIKON hardware or are being fitted around that system. It works well where a flush face, metal construction, and finish-matched appearance matter as much as the switching function itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P 2-way push button format with a 10 A rating and central OFF position\u003c\/li\u003e\n\u003cli\u003eSix-terminal switching layout for the Vintage device format\u003c\/li\u003e\n\u003cli\u003eBuilt-in flush mounting with snap fastening for a clean panel finish\u003c\/li\u003e\n\u003cli\u003eMetal body with integrated label space on the device\u003c\/li\u003e\n\u003cli\u003eNon-lighted configuration with no signal lamp or monitoring contact\u003c\/li\u003e\n\u003cli\u003eCompact body size of 22.30 mm x 48.80 mm x 63.10 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes by finish rather than by switch type. The available versions cover Bronze, Gold, Grey, Nickel, Satin Gold, and White within the same EIKON Vintage 2P 2-way push button format.\u003c\/p\u003e\u003cp\u003eAcross the range, the common points are the 2P switching layout, 10 A rating, built-in mounting style, metal construction, and label space. The visible difference from one version to another is the exterior finish and color tone.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis device belongs to the EIKON system, so the main fit check is compatibility with the rest of the series at the installation point. For marine interiors, that usually means confirming the switch location is already built around EIKON devices and that there is enough depth behind the finished surface for the 63.10 mm body.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe snap-engage mounting helps keep the front face neat once the device is seated correctly in its support, and the label space is useful when several lighting or auxiliary circuits are grouped together at a cabin entrance, saloon panel, or service area. It is a sensible choice for refit and new-build interiors where the switching hardware needs to stay visually consistent across the vessel.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550691688694,"sku":"APL697543-1","price":72.0,"currency_code":"USD","in_stock":false},{"title":"Satin Gold","offer_id":51550691721462,"sku":"APL697543-2","price":89.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550691754230,"sku":"APL697543-0","price":74.85,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":51550691786998,"sku":"APL697543-9","price":89.0,"currency_code":"USD","in_stock":false},{"title":"Nickel","offer_id":51550691819766,"sku":"APL697543-4","price":83.0,"currency_code":"USD","in_stock":false},{"title":"Bronze","offer_id":51550691852534,"sku":"APL697543-5","price":83.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828646_apl697543.jpg?v=1787798319"},{"product_id":"apl927396","title":"Vimar Idea Single Push Button, 1P NC, 16A, 250V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea is a 1-pole normally closed push button rated at 16 A and 250 V~, offered here in ivory or gray. It is a built-in insert for the Vimar Idea modular system, with snap-in fixing, a thermoplastic body with a matte finish, and IP40 protection for protected interior mounting points.\u003c\/p\u003e\u003cp\u003eIn use, this is a momentary break-contact button, which means the circuit is closed at rest and opens while the button is pressed. The front includes a marking area, the module width is 24.8 mm, and there is no built-in illumination or feedback contact. On board, that makes it a better fit for cabins, enclosed panels, and other dry interior spaces than for exposed helm or deck locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NC momentary action. The contact opens while pressed and returns when released.\u003c\/li\u003e\n\u003cli\u003e16 A, 250 V~ rating for AC control circuits that require a normally closed push button.\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, protected interior installations.\u003c\/li\u003e\n\u003cli\u003eBuilt-in modular format with snap-in fixing for Vimar Idea systems.\u003c\/li\u003e\n\u003cli\u003eThermoplastic body, halogen-free construction, and a matte surface finish.\u003c\/li\u003e\n\u003cli\u003eNo illumination and no feedback contact.\u003c\/li\u003e\n\u003cli\u003eFront marking area for circuit identification at the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same Idea push-button family.\u003c\/p\u003e\u003cp\u003eThe change between the variants is the front color. Both versions keep the same 1P NC operating format, 16 A and 250 V~ rating, non-illuminated design, and IP40 protection. The published external dimensions are not identical between the two part numbers, so clearance behind the mounting point should be checked against the selected code.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16104.B, Color Ivory. The front is an ivory finish listed as RAL 9001 equivalent, which works well with light switch panels and cream-toned interior trim.\u003c\/li\u003e\n\u003cli\u003eVM16104, Color Gray. The front is a gray finish listed as RAL 7015 equivalent, which gives stronger contrast on darker panel layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a modular device from the Vimar Idea range, so it should be paired with the correct Idea support and matching trim components. It is not a standalone weatherproof switch for direct mounting into an exposed panel opening.\u003c\/p\u003e\u003cp\u003eFor boat refits, it makes the most sense where the vessel already uses Vimar Idea hardware or where the panel is being built around that modular system. Because the protection level is IP40, it belongs in protected interior spaces such as cabin panels, enclosed service lockers, or sheltered bulkheads rather than areas that see washdowns or direct spray.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe contact format matters before ordering. A normally closed push button behaves differently from the more common normally open style, so the circuit needs to be set up for a break-contact input. That is especially important when replacing an existing push button in a control circuit that relies on NC operation.\u003c\/p\u003e\u003cp\u003eThe 250 V~ rating points to mains AC switching duties rather than typical 12 V or 24 V DC helm switching. It is a good match for buyers who need a Vimar Idea insert with a plain front, a label field, and momentary NC operation in a protected onboard location.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550705385718,"sku":"APL927396-V8","price":30.5,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":51550705418486,"sku":"APL927396-V4","price":31.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364148_apl302102_jpeg.jpg?v=1787798663"},{"product_id":"apl142836","title":"Vimar IDEA Dimmer, For Capacitive Electronic Transformers, 230V, 40-300VA, MOSFET","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar IDEA Series is a flush-mounted dimmer for 230 V~ 50 Hz lighting circuits that use 40 to 300 VA capacitive-response electronic transformers. It uses MOSFET control and can be operated from the built-in control point or from peripheral NO push buttons, which is useful when a cabin or passageway light needs dimming from more than one location.\u003c\/p\u003e\u003cp\u003eThe front is visible in the dark, which helps when lights are turned down for night running or overnight use on board. This unit is flush-mounted and has a 54.10 mm device depth, so it should be matched to the available box depth and the existing IDEA installation layout before ordering.\u003c\/p\u003e\u003cp\u003eThis dimmer is a good match for boats that already use Vimar IDEA devices in the accommodation areas and need 230V AC light control rather than 12V or 24V DC switching. It fits naturally into interior spaces such as cabins, saloons, and companionway access points where controlled light levels matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e230 V~ 50 Hz dimmer for loads from 40 to 300 VA with capacitive-response electronic transformers\u003c\/li\u003e\n\u003cli\u003eMOSFET dimming control for regulated adjustment of compatible transformer-fed lighting\u003c\/li\u003e\n\u003cli\u003eWorks from the built-in control point or from peripheral NO push buttons\u003c\/li\u003e\n\u003cli\u003eVisible-in-dark front makes the control easier to find when ambient light is low\u003c\/li\u003e\n\u003cli\u003eFlush-mounted body with 54.10 mm device depth for IDEA series installations\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matte untreated finish\u003c\/li\u003e\n\u003cli\u003eAvailable in grey or white to match surrounding IDEA devices and trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis dimmer is offered in two color configurations within the IDEA range.\u003c\/p\u003e\u003cp\u003eThe electrical function stays the same across both versions, including 230 V~ 50 Hz supply, 40 to 300 VA load range, MOSFET control, and operation from built-in or peripheral NO push buttons. The change between variants is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16602: Grey. This version suits darker switch panels and interior trims that already use the grey IDEA finish.\u003c\/li\u003e\n\u003cli\u003eVM16602.B: White. This version keeps the same dimming function with a lighter face for white IDEA plates and lighter interior panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis unit is intended for flush installation in an IDEA-compatible setup. Before fitting it on board, confirm that the circuit is 230 V~ 50 Hz, that the connected load uses compatible capacitive-response electronic transformers, and that the enclosure depth can accept a 54.10 mm device.\u003c\/p\u003e\u003cp\u003eOn refit projects, this is most useful where the vessel already has Vimar IDEA wiring accessories and the goal is to add dimming without changing the surrounding look. For marine use, it is best placed in interior locations where the control is protected from direct spray and washdown.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550707712246,"sku":"APL142836-8","price":104.5,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550707745014,"sku":"APL142836-5","price":114.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827694_apl142836.jpg?v=1787798810"},{"product_id":"apl985003","title":"Vimar Plana 1P 10AX 2-Way Switch Mechanism, For 1-3 Module Button, 250V, LED-Illuminable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14004.0 is a Plana series 1P 10AX 2-way switch mechanism rated 250 V~ for controlling an AC circuit from one or two locations, depending on how it is wired.\u003c\/p\u003e\u003cp\u003eIt is a modular insert that is completed with a Plana 1, 2, or 3-module button and can be made lightable with an optional plug-in LED unit. The mechanism uses screw terminals and is specified for IP40, so it belongs in interior areas that stay protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eFor tight switch panels, the body is 22.30 mm wide x 49.00 mm high, with 38.40 mm overall depth and a 24.00 mm built-in depth.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle-pole 2-way (SPDT) switching mechanism, rated 10AX at 250 V~.\u003c\/li\u003e\n\u003cli\u003eLightable function for control or orientation lighting using an exchangeable LED unit.\u003c\/li\u003e\n\u003cli\u003eBuilt to complete with Plana 1-, 2-, or 3-module buttons, keeping a consistent modular layout.\u003c\/li\u003e\n\u003cli\u003eScrew terminal connections for conventional wiring.\u003c\/li\u003e\n\u003cli\u003eIP40 rating for locations that stay dry and protected inside the boat.\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free.\u003c\/li\u003e\n\u003cli\u003eMaximum 100 W for self-ballasted lamps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis listing is for the switch mechanism. It installs as a 1-module flush-mounted device with snap-in fastening and is finished by adding a compatible Plana button.\u003c\/p\u003e\u003cp\u003eUse the stated depths when planning installation in shallow bulkheads or behind a helm side panel where wiring looms and conduits take up space.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThis is a 250 V~ rated mechanism, so treat it as part of the vessel's AC system and wire it with power isolated. Land conductors in the screw terminals per your vessel’s wiring standards and local electrical requirements.\u003c\/p\u003e\u003cp\u003eIf you add the optional illumination, the LED unit can be selected to suit either a 12-24 V supply or a mains-voltage pilot-light circuit, depending on how the switch location is fed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon placements include interior switch groups for saloon or galley circuits on AC power, utility areas, and refits where an existing Plana mechanism needs replacement without changing the surrounding modular layout.\u003c\/p\u003e\u003cp\u003eWith IP40 protection, keep it in cabins and other sheltered spaces, or mount it behind appropriate protection when the switch location is close to spray.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550714986742,"sku":"APL985003","price":7.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826945_apl-75p-9pg-pch.jpg?v=1787799215"},{"product_id":"apl562198","title":"Vimar Eikon 2M Rocker Button, Interchangeable, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20022 is an interchangeable 2-module rocker button cover for Eikon switching devices, with a lightable window so an indicator or locator light can show through when used with a compatible illuminated mechanism.\u003c\/p\u003e\u003cp\u003eThis is the front control element and not the electrical switch itself. The electrical rating and circuit type come from the switch or push button mechanism it is fitted to. The front is rated IP40, which suits protected interior panels and cabins rather than areas that see spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module (2M) one-part rocker format for Vimar Eikon switch and push button mechanisms\u003c\/li\u003e\n\u003cli\u003eLightable rocker with a monitoring window\/light outlet for locator or status indication when paired with a compatible illuminated mechanism\u003c\/li\u003e\n\u003cli\u003eClamp mounting fastening style\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen free\u003c\/li\u003e\n\u003cli\u003eIP40 front protection for dry, sheltered installation locations\u003c\/li\u003e\n\u003cli\u003eNo label area and no exchangeable lens\/symbol\u003c\/li\u003e\n\u003cli\u003eNot listed as suitable for a touch sensor connector for bus systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered with different front finishes and markings while keeping the same 2-module, lightable rocker format.\u003c\/p\u003e\u003cp\u003eOptions include Color Grey, Color Silver, and Color White, with Symbol Standard as well as Symbol Bell, Symbol Key, Symbol Light, and Symbol O\/I. The O\/I marking uses 0 and 1 characters and is specified for 2-pole 1-way switch mechanisms.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis rocker is intended for the Vimar Eikon modular ecosystem. Confirm your existing mechanism and mounting frame are the Eikon format and that your opening is sized for a 2-module rocker.\u003c\/p\u003e\u003cp\u003eIf you are installing into a boat panel, use a protected location where the front will not be exposed to salt spray, dripping, or washdowns. IP40 is appropriate for interior helm pods, cabins, and electrical lockers when the panel face stays dry.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFit the rocker cover onto the compatible mechanism using the clamp mounting system, then verify smooth actuation without binding. If you want the rocker to glow or show status, pair it with the correct illuminated mechanism or lamp arrangement so the light aligns with the monitoring window.\u003c\/p\u003e\u003cp\u003eAfter installation, cycle the control under load and check that the symbol orientation and rocker travel match the intended circuit function.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style of marked rocker is commonly used on yachts and workboats for tidy, repeatable labeling of circuits on interior panels, such as cabin lights, courtesy lighting, a bell or call circuit, or a keyed function where access needs to be obvious at a glance.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where the boat already uses Vimar Eikon hardware and you want a consistent look across switches without changing the underlying mechanisms.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClean with a soft cloth and mild soap solution. Avoid solvents and abrasive pads that can haze a matt finish or damage printed markings.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey \/ Key","offer_id":51550718853366,"sku":"APL562198-V6","price":5.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Standard","offer_id":51550718886134,"sku":"APL562198-V4","price":5.51,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I","offer_id":51550718918902,"sku":"APL562198-V10","price":6.7,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard","offer_id":51550718951670,"sku":"APL562198-V9","price":6.25,"currency_code":"USD","in_stock":true},{"title":"Grey \/ O\/I","offer_id":51550718984438,"sku":"APL562198-V3","price":5.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Light","offer_id":51550719017206,"sku":"APL562198-V65","price":5.67,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Light","offer_id":51550719049974,"sku":"APL562198-V05","price":6.7,"currency_code":"USD","in_stock":true},{"title":"White \/ O\/I","offer_id":51550719082742,"sku":"APL562198-V00","price":5.45,"currency_code":"USD","in_stock":true},{"title":"White \/ Bell","offer_id":51550719115510,"sku":"APL562198-V1","price":5.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Bell","offer_id":51550719148278,"sku":"APL562198-V2","price":5.45,"currency_code":"USD","in_stock":true},{"title":"White \/ Light","offer_id":51550719181046,"sku":"APL562198-V91","price":5.45,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Key","offer_id":51550719213814,"sku":"APL562198-V5","price":6.7,"currency_code":"USD","in_stock":true},{"title":"White \/ Standard","offer_id":51550719246582,"sku":"APL562198-V8","price":5.3,"currency_code":"USD","in_stock":true},{"title":"White \/ Key","offer_id":51550719279350,"sku":"APL562198-V0","price":5.45,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Bell","offer_id":51550719312118,"sku":"APL562198-V7","price":6.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363301_apl562198_jpeg.jpg?v=1787799414"},{"product_id":"apl685678","title":"Vimar ARKÉ Axial 1P 10AX 2-Way Switch, 250V, IP40, Lightable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series is an axial 1P 10AX 250V two-way switch range for modular flush-mounted switching points in protected interior spaces. It uses a lightable, replaceable button and is rated for two-way wiring, with a maximum 100 W load for lamps with built-in power units.\u003c\/p\u003e\u003cp\u003eThis is the kind of switch used when you want clean wall or panel integration and straightforward control of a lighting circuit from two locations. The axial format keeps the front clean, while the ARKÉ modular layout makes it easier to match the switch insert to the frame and finish already used on board.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this range makes the most sense in cabins, companionways, galleys, or enclosed helm areas where the switch is protected from direct spray. With IP40 protection, it suits dry interior installations rather than exposed deck or washdown locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10AX, 250V two-way switch format for lighting circuits controlled from two points\u003c\/li\u003e\n\u003cli\u003eLightable button helps with switch location in low light and the button can be replaced if needed\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular design for ARKÉ installations, offered in 1 Module and 2 Modules\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matte finish, with a lacquered finish on Metal versions\u003c\/li\u003e\n\u003cli\u003eIP40 rating for protected interior mounting areas\u003c\/li\u003e\n\u003cli\u003eAvailable in grey, white, and Metal finishes to suit different panel and plate layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies by finish and module width. Finish options are grey, Metal, and white, and each finish is offered in both 1 Module and 2 Modules, so the switch can be matched to the frame and cover-plate layout already used in the installation.\u003c\/p\u003e\u003cp\u003eThe switching function stays the same across the family: axial 1P two-way switching rated 10AX at 250V, with a lightable, replaceable button. Grey and white versions use a matte untreated surface, while the Metal versions use a matte lacquered surface.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check the module count required by the surrounding ARKÉ support and cover plate. A 1 Module insert will not substitute for a 2 Modules insert, even though the electrical function is the same.\u003c\/p\u003e\u003cp\u003eThis switch is intended for flush-mounted installations and suits AC switching points where a compact modular insert is preferred over a larger standalone switch body. In a two-way circuit, it should be paired with the correct matching switching arrangement elsewhere in the run.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis switch range is a good match for boats with finished interior spaces and modular AC control panels. It fits well in cabins, heads, saloons, and other sheltered areas where appearance matters and the switch needs to sit neatly within a coordinated plate system.\u003c\/p\u003e\u003cp\u003eIt is less suited to open cockpits, exterior bulkheads, or any location that sees regular spray, salt buildup, or washdowns. In those areas, a higher level of environmental protection is usually the better fit.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Metal \/ 2 Modules","offer_id":51550724948214,"sku":"APL685678-9","price":18.0,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1 Module","offer_id":51550724980982,"sku":"APL685678-7","price":15.59,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module","offer_id":51550725013750,"sku":"APL685678-3","price":15.0,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Modules","offer_id":51550725046518,"sku":"APL685678-4","price":16.5,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Modules","offer_id":51550725079286,"sku":"APL685678-2","price":16.5,"currency_code":"USD","in_stock":false},{"title":"Metal \/ 1 Module","offer_id":51550725112054,"sku":"APL685678-8","price":16.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828666_apl685678.jpg?v=1787799538"},{"product_id":"apl736375","title":"Vimar By-me Plus DIN-Rail Master Dimmer, 230V, Universal\/LED Retrofit Loads, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMR01870 is a 230 V AC MASTER dimmer module for DIN-rail electrical panels, used to dim a single lighting output inside a Vimar By-me Plus installation. It handles common mixed loads you see on boats with shore power or inverter-fed AC lighting, including 40 to 500 W incandescent, 40 to 300 VA electronic transformers, 10 to 200 W CFL, and 3 to 200 W LED loads.\u003c\/p\u003e\u003cp\u003eIt mounts on a 60715 TH35 DIN rail and takes up 4 standard modules (17.5 mm each), so it fits cleanly in a structured AC distribution cabinet. The front LED indicator helps with quick status checks during commissioning, and an internal protection fuse adds a layer of protection if a fault develops on the circuit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e230 V AC, 50\/60 Hz dimming module for one lighting output in a bus-controlled installation\u003c\/li\u003e\n\u003cli\u003eLoad support range covers incandescent (40 to 500 W), electronic transformers (40 to 300 VA), CFL (10 to 200 W), and LED (3 to 200 W), including LED electronic power supply units\u003c\/li\u003e\n\u003cli\u003eDIN-rail installation on 60715 TH35, with a 4-module footprint (4 x 17.5 mm)\u003c\/li\u003e\n\u003cli\u003eIP20 protection rating for installation inside a protected electrical enclosure\u003c\/li\u003e\n\u003cli\u003eOnboard LED indication and an integrated protection fuse for service troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a 230 V device, so it belongs on vessels with 230 V AC distribution (shore power, generator, or a 230 V inverter system). It is not a 12 V or 24 V dimmer, and it is not meant for low-voltage LED strip circuits unless those strips are driven from a suitable 230 V dimmable power supply that stays within the listed load range.\u003c\/p\u003e\u003cp\u003eBefore ordering, match the connected load type and total wattage to the ranges above, and confirm the lamps or drivers are intended for dimming. When LED loads flicker or drop out at low levels, the cause is usually the driver or lamp, not the module, so compatibility checks up front save time during install.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan for a dry, protected mounting location in the AC panel or automation cabinet, since the housing is rated IP20. Leave room for wiring bend radius and panel airflow, and keep it away from areas that regularly see spray, washdown, or condensation.\u003c\/p\u003e\u003cp\u003eBecause this is mains voltage equipment, installation should follow marine electrical practices for AC systems, including correct upstream protection and enclosure grounding. If the protection fuse opens, replace it only with the same type and rating specified for the unit.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis module makes sense on yachts and larger boats where cabin or saloon lighting is run on 230 V and controlled from a centralized automation panel. It is also a practical spare for maintaining an existing By-me Plus installation, where matching the original module footprint and load behavior matters during a refit or service call.\u003c\/p\u003e\u003ch6\u003eProduct lifecycle\u003c\/h6\u003e\u003cp\u003eThis item is listed as a spare part and is marked to be discontinued, which is worth factoring in if you maintain a boat with a standardized automation spares kit.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550727635190,"sku":"APL736375","price":410.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827162_apl736375.jpg?v=1787799720"},{"product_id":"apl999880","title":"Vimar LED Switch Illumination Insert, 12-24V AC\/DC, 0.1W, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 10490 is a white LED signalling unit for illuminable Vimar rocker switches and push buttons, powered from 12-24 V AC\/DC and drawing 0.1 W.\u003c\/p\u003e\u003cp\u003eIt sits behind the switch to add a locator light you can see at night, or a simple status indication depending on how your switch module is wired. Because the draw is tiny, it works well on boats where the panel may stay energized for night running.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRuns on 12V or 24V systems (12-24 V AC\/DC)\u003c\/li\u003e\n\u003cli\u003e0.1 W power draw for low overnight load\u003c\/li\u003e\n\u003cli\u003eWhite LED light that is easy to spot on a switch panel\u003c\/li\u003e\n\u003cli\u003eCompatible with Vimar illuminable rocker switches across the Plana, Arké, Linea, Eikon and Idea families\u003c\/li\u003e\n\u003cli\u003eInsert-style lamp that integrates into the switch mechanism rather than a standalone panel indicator\u003c\/li\u003e\n\u003cli\u003eWorks as a switch locator in dark cockpits and cabins, or as an on and off indicator for a connected circuit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis signalling unit is intended for Vimar modular wiring devices that accept a removable light insert. It is not a round indicator lamp that mounts through a drilled panel, so verify your switch or push button is the illuminable version with the dedicated light position.\u003c\/p\u003e\u003cp\u003eIn Vimar cataloging, the same white 12-24 V insert is commonly shown as code 00935.W, which can help when matching an older panel bill of materials.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePower down the circuit at the breaker, then remove the rocker and the switch module from the frame to access the rear. Fit the signalling unit into the light seat on the module and land the two leads on the illumination terminals.\u003c\/p\u003e\u003cp\u003eFor a locator light, the insert is typically fed from the panel supply. For a status indication, it is commonly tied to the switched output so it lights only when the load is on. Confirm the behavior before you reinstall the faceplate and button up the panel.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eBecause it accepts 12-24 V AC\/DC, it can be used on most boat DC systems and on low-voltage control circuits. Keep the feed protected by the same fuse or breaker that protects the switch circuit, and use tinned marine wire where the run is exposed to moisture.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for helm or cabin panels built around Vimar modular switches where you want a small white reference point at night, or a quick visual that a circuit like deck lights, spreader lights, or a livewell pump is energized.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe insert lives behind the faceplate, so routine care is mostly about keeping the switch panel clean and dry. If you see moisture or corrosion at the terminals, correct the source and re-terminate with clean, protected connections.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550728257782,"sku":"APL999880","price":6.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280977_apl999880.jpg?v=1787799768"},{"product_id":"apl444211","title":"Vimar Plana 2P+E English SICURY Socket Outlet, 16A, 250V, IP20, 2 Modules, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2P+E English SICURY outlet for flush-mounted AC power points on board. It is rated at 16 A and 250 V for 50 to 60 Hz systems, uses screw terminals, and fits a 2-module layout with a body size of 44.8 x 49.0 x 39.7 mm.\u003c\/p\u003e\u003cp\u003eThe outlet uses the English standard socket format and includes enhanced contact protection through the SICURY shutter system. Its thermoplastic body is halogen-free, the finish is glossy, and the IP20 rating makes it a fit for dry interior spaces such as cabins, saloons, galleys, and navigation stations rather than exposed deck or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E English standard outlet rated 16 A, 250 V, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003eSICURY shutter with enhanced contact protection\u003c\/li\u003e\n\u003cli\u003eFlush-mounted 2-module format for integrated interior panels\u003c\/li\u003e\n\u003cli\u003eScrew-terminal connection for fixed wiring\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with glossy finish\u003c\/li\u003e\n\u003cli\u003eIP20 construction for protected indoor mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact body size: 44.8 x 49.0 x 39.7 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in two colour configurations within the same Plana range.\u003c\/p\u003e\u003cp\u003eThe variants differ in colour and surface protection. The electrical rating, 2-module format, screw-terminal connection, IP20 protection, and overall dimensions remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14218: White finish, similar to RAL 9003, with an untreated glossy surface. This keeps the look neutral and works well with light interior panels, liners, and trim.\u003c\/li\u003e\n\u003cli\u003eVM14218.SL: Silver finish, similar to RAL 9006, with a lacquered glossy surface. This gives a more technical look that suits modern switch panels and metallic interior details.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush-mounted outlet with screw terminals, so it suits fixed AC installations where clean panel integration matters as much as electrical function. The 2-module size also helps when matching other devices from the Plana range across a cabin or control area.\u003c\/p\u003e\u003cp\u003eBecause it is an English standard outlet, it is intended for vessels already set up around that socket format. It is a sensible match for refit and new-build work where the goal is to keep interior outlets consistent in cabins and service spaces while staying within protected indoor mounting locations.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550751949046,"sku":"APL444211-2","price":22.87,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550751981814,"sku":"APL444211-5","price":28.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827622_apl444211.jpg?v=1787800387"},{"product_id":"apl725576","title":"Vimar 8000 Series RJ45 Netsafe Outlet, T568A\/B Universal Wiring","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 8000 Series is a range of RJ45 Netsafe outlets for fixed data and telecommunication points in the 8000 device line. Across the listed versions, the common format is an RJ45 8(8) modular jack with T568A\/B universal wiring, while the range covers Cat. 6 UTP with 110 termination, Cat. 5e UTP in a tool-free special module, and Cat. 5e FTP with 110 termination.\u003c\/p\u003e\u003cp\u003eOn a boat, this type of outlet is used when you want a clean panel-mounted network point at the helm, nav station, cabin, or equipment locker instead of leaving a loose cable end. The main fit checks are the network category, whether the run is shielded or unshielded, and whether the installation is being terminated with a 110-style tool or with the special tool-free version.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRJ45 8(8) modular outlet format for fixed data and telecommunication terminations\u003c\/li\u003e\n\u003cli\u003eT568A\/B universal wiring across all listed variants\u003c\/li\u003e\n\u003cli\u003eRange includes Cat. 6 UTP, Cat. 5e UTP, and Cat. 5e FTP options\u003c\/li\u003e\n\u003cli\u003eBoth shielded and unshielded versions are available within the same family\u003c\/li\u003e\n\u003cli\u003eTermination style changes by variant, with 110-type versions and one tool-free special module\u003c\/li\u003e\n\u003cli\u003eCable compatibility changes by version, with the Cat. 6 UTP model accepting round and flat cable and the Cat. 5e models intended for round cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations within the same 8000 Series Netsafe RJ45 family.\u003c\/p\u003e\u003cp\u003eThe differences between variants are the cable category, shielding, and termination style. Across the three versions, the common points are the RJ45 8(8) interface and T568A\/B universal wiring.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM08459.6: Port RJ45 Cat6 Netsafe UTP 110. This is the unshielded Cat. 6 version with 110-type insulation-piercing terminals, and it is the only listed option that accepts both round and flat cable.\u003c\/li\u003e\n\u003cli\u003eVM08459.11: Port RJ45 Cat5e Netsafe UTP. This is the unshielded Cat. 5e special module with insulation-piercing terminals without tool use, intended for round cable.\u003c\/li\u003e\n\u003cli\u003eVM08459.5: Port RJ45 Cat5e Netsafe FTP 110. This is the shielded Cat. 5e version with 110-type insulation-piercing terminals for round cable runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese outlets belong to the Vimar 8000 device range, so mechanical fit should be checked against the matching 8000 mounting and cover arrangement already installed on the vessel. For refits, it is worth confirming the cable type behind the panel before ordering, because the three versions do not share the same shielding or termination method.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAll listed versions use T568A\/B wiring, which helps when the boat already has a defined structured cabling scheme. The two 110 variants require a special tool for termination, while the Cat. 5e UTP special module does not, so the installation approach should match the tools and practice being used on board.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis range suits boats that need tidy fixed RJ45 points as part of an onboard data or telecommunication run, especially where the panel already uses Vimar 8000 devices. It fits new installations and refits where category, shielding, and termination style need to line up with the rest of the cabling plan.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"RJ45 Cat5e Netsafe UTP","offer_id":51550772887798,"sku":"APL725576-V2","price":20.5,"currency_code":"USD","in_stock":false},{"title":"RJ45 Cat6 Netsafe UTP 110","offer_id":51550772920566,"sku":"APL725576-V1","price":27.03,"currency_code":"USD","in_stock":false},{"title":"RJ45 Cat5e Netsafe FTP 110","offer_id":51550772953334,"sku":"APL725576-V3","price":33.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1313976_apl725576.webp?v=1787800850"},{"product_id":"apl723144","title":"Vimar Eikon 2P 32A 1-Way Switch, For British Standard Mounting Boxes, 250V, 3-Module, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20017 is a 2-pole 32A 1-way switch button range for square British standard mounting boxes. It uses a 3-module format and is rated for 250 V, with a front size of 82.5 x 82.5 mm, a device depth of 32.5 mm, and a built-in depth of 22.5 mm.\u003c\/p\u003e\u003cp\u003eThis style of switch makes sense for protected interior AC circuits on board where you want a clean wall or panel finish and a switch that is easy to identify and service. It is flush-mounted, uses screwed terminals, and fits with a separate 3-module British standard cover plate. With an IP40 rating, it is better suited to cabins, galleys, utility areas, and other enclosed spaces than exposed deck locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-pole 1-way switch rated at 32 A and 250 V for higher-load AC circuits\u003c\/li\u003e\n\u003cli\u003e3-module format with built-in frame for square British standard mounting boxes\u003c\/li\u003e\n\u003cli\u003eOptional lighting for control and orientation, with an exchangeable LED\u003c\/li\u003e\n\u003cli\u003eScrew terminal connection and screw-mounted flush installation for fixed onboard wiring\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt finish and front label space\u003c\/li\u003e\n\u003cli\u003eIP40 protection for protected interior locations\u003c\/li\u003e\n\u003cli\u003eSupports integrated ballast lamps up to 200 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes in two ways: front color and printed symbol. It is offered in grey, silver, and white, and each color is available with either the standard symbol or the Water\/Heater symbol.\u003c\/p\u003e\u003cp\u003eAcross the six versions, the switching format stays the same: 2-pole, 32A, 250 V, with the same 3-module layout for British standard mounting boxes. The main difference is the finished look on the panel and whether the rocker carries a clear Water\/Heater marking for circuit identification.\u003c\/p\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check that your vessel uses a square British standard mounting box and the matching 3-module plate format. This switch is flush-mounted and uses screwed terminals, which suits fixed installations where secure terminations matter in areas subject to onboard vibration. It is a better match for protected interior AC switching points than for open cockpit or washdown-exposed positions.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis range works well in refit and new-build interiors where the switch finish needs to match other Vimar Eikon devices. The Water\/Heater symbol versions are useful when a dedicated appliance or hot water circuit should be obvious at a glance, while the standard symbol versions keep the look more neutral for general service circuits.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Water\/Heater","offer_id":51550782980342,"sku":"APL723144-V7","price":76.0,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Water\/Heater","offer_id":51550783013110,"sku":"APL723144-V4","price":72.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Standard","offer_id":51550783045878,"sku":"APL723144-V0","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Standard","offer_id":51550783078646,"sku":"APL723144-V5","price":72.77,"currency_code":"USD","in_stock":false},{"title":"White \/ Water\/Heater","offer_id":51550783111414,"sku":"APL723144-V9","price":72.0,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Standard","offer_id":51550783144182,"sku":"APL723144-V3","price":74.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363270_apl723144_jpeg.jpg?v=1787800932"},{"product_id":"apl623801","title":"Vimar Plana Vertical Pocket Badge Switch, 16A 250V, 3 Modules","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a vertical pocket badge switch for flush-mounted access control setups in protected interior spaces. It uses a 16 A 250 V~ change-over relay output and supports 230 V~ 50 to 60 Hz, 24 V~ 50 to 60 Hz, or 24 Vdc SELV supply. The unit is supplied without the ISO card badge.\u003c\/p\u003e\u003cp\u003eThis is a standalone device with no network or PC interface, so it suits installations that need a self-contained badge-operated switch rather than integration with a bus or data system. Its IP20 rating, plastic body, and flush-mounted 3-module format place it in interior locations such as accommodation areas, service spaces, or controlled-access points on board where the mounting surface is protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eOverall size is compact for panel work, with a height of 49 mm and depth of 56.8 mm. Width changes slightly by finish, so it is worth checking the trim and mounting layout when matching existing Plana fittings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e16 A 250 V~ change-over relay output for badge-operated switching\u003c\/li\u003e\n\u003cli\u003eSupply options include 230 V~ 50 to 60 Hz, 24 V~ 50 to 60 Hz, and 24 Vdc SELV\u003c\/li\u003e\n\u003cli\u003eFlush-mounted 3-module format for built-in interior installation\u003c\/li\u003e\n\u003cli\u003eStandalone unit with no network interface and no PC binding\u003c\/li\u003e\n\u003cli\u003eIP20 protection for dry, protected indoor locations\u003c\/li\u003e\n\u003cli\u003ePlastic housing with a body depth of 56.8 mm and height of 49 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two finish options within the same Plana vertical pocket badge switch range.\u003c\/p\u003e\u003cp\u003eThe difference between variants is the finish color, with a small width variation between the two versions. The electrical rating, supply options, mounting method, operating temperature range, IP20 protection, and overall height and depth remain the same across both variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14465: White finish, width 67.5 mm. This version blends more quietly into lighter cabin panels and other interiors where a neutral finish is preferred.\u003c\/li\u003e\n\u003cli\u003eVM14465.SL: Silver finish, width 67.2 mm. This version gives a more technical look on darker trims or metallic interior details.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis badge switch is flush-mounted and built around a 3-module layout, so fit should be checked against the frame, box, and cover plate used in the existing Plana installation. Because the housing is IP20, it is better suited to protected interior bulkheads rather than exposed deck positions, wet lockers, or areas that see regular washdown.\u003c\/p\u003e\u003cp\u003eThe supported supply choices make it relevant for both mains-fed and low-voltage control arrangements on board. For interior refits and new-build accommodation areas, that gives more flexibility when the switch needs to sit within either a 230 V circuit or a 24 V control scheme.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis unit suits vessels that use badge-operated switching in guest cabins, crew cabins, or other managed interior spaces where access or room functions are linked to a card insert switch. It also fits projects where a standalone access control component is required without network communication or interface hardware.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550809587958,"sku":"APL623801-6","price":173.61,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550809620726,"sku":"APL623801-7","price":180.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827919_apl623801.jpg?v=1787801586"},{"product_id":"apl928802","title":"Vimar Linea Classica USA+SASO Socket Outlet, 2P+E, 15A 127V, Flush-Mounted, White RAL 9001, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM10195 is a 2P+E (grounded) socket outlet module rated 15A at 127 V AC, set up for American and Saudi Arabian plug standards.\u003c\/p\u003e\u003cp\u003eIt is a flush-mounted device in the LINEA Classica series, which makes it a practical choice when you are building out AC receptacles in cabins, galleys, or a nav station on a boat with a 127 V AC distribution system.\u003c\/p\u003e\u003cp\u003eThe body measures 22.00 mm wide x 36.00 mm high x 32.50 mm deep, and it is made from halogen-free thermoplastic with a matt white finish (RAL 9001 similar). A built-in label space gives you a clean spot to mark a circuit, location, or equipment feed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e15A, 127 V AC rating for standard 127 V onboard AC branch circuits\u003c\/li\u003e\n\u003cli\u003e2P+E grounded receptacle format configured for American and Saudi Arabian standards\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation style for clean panel and bulkhead installs\u003c\/li\u003e\n\u003cli\u003eCompact device size (22.00 mm W x 36.00 mm H x 32.50 mm D) for tight electrical panels\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eWhite color (RAL 9001 similar) that matches common marine interior trim\u003c\/li\u003e\n\u003cli\u003eLabel space\/information surface for clear identification in multi-outlet areas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is part of the LINEA Classica device family and is intended to be used with compatible flush-mount frames and cover plates from the same system. Plan for the 32.50 mm device depth behind the mounting surface, plus space for conductor bend radius and terminal access.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it on a properly protected 127 V AC circuit and size overcurrent protection to the branch wiring and intended load. In wet or spray-prone locations, mount it where it stays protected from direct water exposure and pair it with an appropriate enclosure strategy for the installation area.\u003c\/p\u003e\u003cp\u003eIf you are refitting an older boat, confirm your onboard AC frequency and distribution standards match the equipment you plan to plug in, and keep the receptacle location clear of heat sources and vibration points that can work terminals loose over time.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module is a good match for boats that run 127 V AC for onboard outlets and need a receptacle format aligned with American and Saudi Arabian plug standards. The label field is especially useful in engine room access panels, inverter-fed outlet banks, and helm areas where distinguishing shore power versus inverter circuits matters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically de-energize the circuit and check terminals for signs of heat, discoloration, or corrosion. If the outlet is installed in a high-use area, a quick re-torque check during annual electrical inspections helps prevent nuisance faults and hot connections.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550821449974,"sku":"APL928802","price":7.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826926_apl-dwu-i98-aai.jpg?v=1787801970"},{"product_id":"apl092321","title":"Vimar Idea USA GFCI Duplex Socket Outlet, 15A 125V, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16296 USA+GFCI socket outlet is a double 2P+E 15 A 125 V American-standard receptacle with integrated GFCI for flush-mounted installations on boats using 125 V, 60 Hz AC service. It has a built-in mounting frame, screw terminal connections, and a front size of 73 x 107 mm with 41.1 mm depth.\u003c\/p\u003e\u003cp\u003eBecause it is rated IP20, this outlet belongs in protected interior spaces rather than exposed deck or washdown areas. It is a sensible fit for cabins, saloons, galleys, and other enclosed locations where a duplex outlet with ground-fault protection is needed at the point of use.\u003c\/p\u003e\u003cp\u003eThe body is made from halogen-free thermoplastic with a matt finish. A 3-module cover plate is required to complete the installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDouble 2P+E receptacle rated 15 A, 125 V, 60 Hz with integrated GFCI\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRated fault current of 6 mA\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFlush-mounted body with built-in mounting frame and screw terminal connections\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFront dimensions of 73 x 107 mm with 41.1 mm device depth\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP20 protection for protected interior mounting locations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHalogen-free thermoplastic body with matt surface finish\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRequires a separate 3-module cover plate to finish the installation\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eAcross both versions, the electrical rating, GFCI protection, mounting method, and overall dimensions stay the same. The change between variants is the visible finish color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eVM16296.B: Color Ivory. This is the lighter finish in the range and suits interior panels and trim where a light outlet face is preferred.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM16296: Color Gray. This is the darker finish in the range and blends more naturally with gray switch plates and darker interior panels.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis outlet fastens with screws and is intended for flush mounting. When planning a replacement or new panel layout, allow for the 41.1 mm device depth and for the screw-terminal wiring space behind the mounting surface.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that already use the Vimar Idea system and need an American-standard AC outlet with GFCI at the receptacle. It is not a low-voltage DC device, so it should be used only on compatible 125 V AC circuits.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550848811254,"sku":"APL092321-V2","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":51550848844022,"sku":"APL092321-V4","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364319_apl092321_jpeg.jpg?v=1787802702"},{"product_id":"apl975387","title":"Vimar Plana Shaver Supply Unit 230V, 20 VA Isolating Transformer, 120V\/230V Output, 3-Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a flush-mounted 230 V shaver supply unit for spaces that need a dedicated outlet for grooming appliances. It uses a 20 VA isolating transformer and supports 120 V output for 2P 15 A 125 V American standard plugs with non-polarized flat blades, plus 230 V output for 2P 2.5 A Europlugs.\u003c\/p\u003e\u003cp\u003eThis unit is built in a 3-module Plana format and measures 67.30 mm wide, 49.00 mm high, and 51.50 mm deep. That matters when you are matching existing switch layouts in a boat head, cabin, or any accommodation space already using the Plana system.\u003c\/p\u003e\u003cp\u003eOn board, it fits best in enclosed interior areas with a 230 V AC supply from shore power or an inverter-fed circuit. It is a dedicated shaver outlet rather than a general-purpose receptacle, so plug type and installation format are the main fit checks before purchase.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e230 V~ 50-60 Hz input with a 20 VA isolating transformer for shaver use\u003c\/li\u003e\n\u003cli\u003e120 V output for 2P 15 A 125 V American standard plugs with non-polarized flat blades\u003c\/li\u003e\n\u003cli\u003e230 V output for 2P 2.5 A Europlugs\u003c\/li\u003e\n\u003cli\u003eFlush-mounted 3-module Plana format for installations that need a consistent modular layout\u003c\/li\u003e\n\u003cli\u003eThermoplastic body with a glossy visible finish across the range\u003c\/li\u003e\n\u003cli\u003eAvailable in white, silver, or white with antibacterial treatment depending on variant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three configurations.\u003c\/p\u003e\u003cp\u003eAcross the listed versions, the electrical format stays the same: 230 V~ 50-60 Hz input, 20 VA isolating transformer, dual shaver outputs, and a 3-module Plana flush-mounted layout. The change between variants is the visible finish or surface treatment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14290.SL: Silver. This version uses a silver finish that works well where the surrounding switches or trim already follow a metallic look.\u003c\/li\u003e\n\u003cli\u003eVM14290: White. This version keeps the appearance aligned with standard white Plana devices.\u003c\/li\u003e\n\u003cli\u003eVM14290.AB: White with antibacterial treatment. The surface treatment is relevant in shared washroom spaces and other high-touch interior installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck that the installation uses the Vimar Plana system and has room for a 3-module flush-mounted device. The body dimensions are compact, but matching the correct mounting arrangement and front aesthetics is still important in refit work.\u003c\/p\u003e\u003cp\u003eThis unit suits yachts, motorboats, and accommodation builds where a dedicated shaver point is needed and the AC system already runs at 230 V. It is especially relevant when users may bring either a Europlug shaver or a 120 V American standard non-polarized flat-blade plug.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver","offer_id":51550852972790,"sku":"APL975387-2","price":197.0,"currency_code":"USD","in_stock":false},{"title":"White\/Antibacterial","offer_id":51550853005558,"sku":"APL975387-7","price":166.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550853038326,"sku":"APL975387-0","price":156.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828231_apl975387.jpg?v=1787802770"},{"product_id":"apl312811","title":"Vimar Arké 19015 2-Pole 1-Way Rocker Switch, 16AX, 250V, IP40, Flush-Mount, Lightable, Replaceable Button","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Arké 19015 is a flush-mounted, modular 2-pole 16 AX 250 V~ 1-way rocker switch with a replaceable button and optional illumination. It fits neatly into cabin and saloon switch banks where you want a clean wall-switch look for onboard AC circuits.\u003c\/p\u003e\u003cp\u003eThis switch is rated up to 16 A and supports up to 200 W for self-ballasted lamps, which is useful when switching modern AC lighting loads. With an IP40 front, it belongs in protected interior locations, not in areas exposed to spray, washdowns, or weather.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e2-pole, 1-way switching for AC circuits up to 250 V~ and 16 AX.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSupports up to 200 W for self-ballasted lamps.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLightable format for an optional locator\/indicator light when you want switch visibility at night.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReplaceable button so cosmetic wear can be refreshed without rewiring the mechanism.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFlush-mount modular device with snap-in fastening and screw terminals for secure wiring in vibrating installations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP40 protection level for sheltered interior panels and bulkhead plates.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis switch is offered in 1-module and 2-module formats to match the opening in your Arké support and cover plate. Finish options include grey, white, and Metal.\u003c\/p\u003e\u003cp\u003eSelected grey and white versions are also available in antibacterial material. Across the range, the electrical function stays the same: 2-pole 16 AX 250 V~ 1-way switching with a lightable, replaceable button and IP40 protection.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a Vimar Arké modular device, so the fit is dictated by the Arké mounting support, cover plate, and the module width already installed on your boat. Match the module size to your existing cutout and plate layout before ordering, especially when replacing a 1-module device with a 2-module device or vice versa.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThe switch uses screw terminals and is intended for AC circuits up to 250 V~. Since it is a 2-pole device, it can switch two conductors together, which is often used on board when isolating a circuit at the switch point.\u003c\/p\u003e\u003cp\u003eIf you plan to use the illumination feature, allow for the extra wiring required by the chosen lamp accessory. In marine panels, keep wiring tidy with strain relief and ensure the back of the device sits in a dry, protected cavity.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis switch suits interior AC switching where a standard rocker action is preferred, such as cabin lighting circuits, utility circuits fed from shore power, or inverter-supplied AC loads. It is a good match for refits where Arké devices are already used and you want consistent color and module sizing across the switch bank.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the exposed surfaces with a soft, slightly damp cloth and avoid harsh solvents that can haze plastics. During periodic electrical checks, re-inspect terminal tightness and look for heat discoloration if the circuit is frequently run near its rating.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"1 Module \/ White Antibacterial","offer_id":51550871093494,"sku":"APL312811-V0","price":22.5,"currency_code":"USD","in_stock":true},{"title":"2 Modules \/ Gray","offer_id":51550871126262,"sku":"APL312811-V10","price":24.69,"currency_code":"USD","in_stock":false},{"title":"2 Modules \/ Metal","offer_id":51550871159030,"sku":"APL312811-V12","price":25.5,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ White","offer_id":51550871191798,"sku":"APL312811-V5","price":20.27,"currency_code":"USD","in_stock":false},{"title":"2 Modules \/ White","offer_id":51550871224566,"sku":"APL312811-V11","price":23.75,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Gray","offer_id":51550871257334,"sku":"APL312811-V6","price":19.5,"currency_code":"USD","in_stock":true},{"title":"1 Module \/ Gray Antibacterial","offer_id":51550871290102,"sku":"APL312811-V9","price":22.5,"currency_code":"USD","in_stock":true},{"title":"1 Module \/ Metal","offer_id":51550871322870,"sku":"APL312811-V7","price":21.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1269341_apl312811_jpeg.jpg?v=1787803103"},{"product_id":"apl287336","title":"Vimar Eikon Vintage 1P 10AX 2-Way Switch, 250V, Flush-Mounted","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON Series is a flush-mounted range of 1P 10AX 2-way switches in Vintage finishes for interior AC lighting circuits. These switches are rated 10AX at 250 V and are listed with a maximum 100 W load for self-ballasted lamps under IEC 60669-1:2017, which gives buyers a clear starting point for matching the switch to the circuit it will control.\u003c\/p\u003e\u003cp\u003eIt is a one-module switch with snap-in fastening and screwed terminals, used where the same light or circuit needs to be operated from two locations. On board, that layout suits spaces such as a cabin light controlled at the entrance and beside a berth, or a passageway light switched from each end. The range sits within the EIKON modular device family, so fit with the correct support and finish set matters just as much as the electrical rating.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P 10AX 2-way switching for controlling one circuit from two positions\u003c\/li\u003e\n\u003cli\u003eRated 250 V with a maximum 100 W load for self-ballasted lamps\u003c\/li\u003e\n\u003cli\u003eFlush-mounted one-module format for EIKON modular installations\u003c\/li\u003e\n\u003cli\u003eScrewed terminal connection for wired installation\u003c\/li\u003e\n\u003cli\u003eSnap-in fastening for integration into compatible mounting supports\u003c\/li\u003e\n\u003cli\u003eVintage finish options across the range: satin gold, white, bronze, gold, grey, and nickel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes mainly in visible finish and colour, with versions offered in satin gold, white, bronze, gold, grey, and nickel. Depending on the version, the outer finish is listed as matt or glossy, with lacquered or metallic surface treatment.\u003c\/p\u003e\u003cp\u003eSome construction details also change by finish. Most listed versions are shown as plastic-bodied switches with a 48.8 mm device height, while the satin gold version is listed with metal and brass construction and a 44.8 mm device height. Across the family, the switching format remains the same as a 1P 10AX 2-way flush-mounted device with screwed terminals.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis switch belongs to the EIKON device system, so it should be matched with the correct compatible mounting support and cover plate for that series. Most listed variants are shown at 22.3 mm wide, 48.8 mm high, and 54.7 mm deep, with a built-in depth of 32 mm. The satin gold version is listed at 22.3 mm wide, 44.8 mm high, and 54.7 mm deep, so finish choice can affect visible size and construction details.\u003c\/p\u003e\u003cp\u003eFor marine refit work, this product makes the most sense in protected interior locations where a decorative wall switch is part of the cabin finish rather than a sealed deck or helm control. Buyers comparing it with 12V or 24V panel switches should note that this is a 250 V wired switch from a modular wall-device range.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThe screwed terminals and flush-mounted format suit clean interior installations in saloons, cabins, corridors, and guest spaces where the switch needs to sit neatly with other EIKON devices. It is a good match for boats that use residential-style AC fittings inside the accommodation space and want the switch finish to line up with the rest of the interior hardware.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550886691062,"sku":"APL287336-0","price":45.25,"currency_code":"USD","in_stock":false},{"title":"Nickel","offer_id":51550886723830,"sku":"APL287336-8","price":54.06,"currency_code":"USD","in_stock":false},{"title":"Satin Gold","offer_id":51550886756598,"sku":"APL287336-5","price":56.0,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":51550886789366,"sku":"APL287336-3","price":56.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550886822134,"sku":"APL287336-1","price":45.25,"currency_code":"USD","in_stock":false},{"title":"Bronze","offer_id":51550886854902,"sku":"APL287336-4","price":52.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828586_apl287336.jpg?v=1787803590"},{"product_id":"apl003619","title":"Vimar Idea 2P 1-Way Switch, 16AX, 250V, IP40, Screw Terminal","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16016 is a 2-pole, 1-way rocker switch rated 16 AX at 250 V~ for the Vimar IDEA modular range. It has an IP40 rating for dry, protected interior locations and it is commonly used for AC switching where you want a clean, flush-mounted rocker on a finished panel.\u003c\/p\u003e\u003cp\u003eOn boats, this style of switch is typically fitted in cabins, nav stations, and electrical consoles that stay out of direct spray and washdowns. It is offered in Gray or Ivory, with or without an indicator, so you can match the faceplate and decide whether you want a visible reference point in low light. For self-ballasted lamps, observe the 200 W maximum.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-pole switching with a 1-way rocker action for AC circuits where both conductors are switched at the control point\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating suited to lighting loads that can have higher inrush than simple resistive loads\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for interior panels and bulkheads that stay dry\u003c\/li\u003e\n\u003cli\u003eIDEA modular format in a 1-module size (24.80 mm wide, 50.10 mm high) for consistent alignment in multi-gang frames\u003c\/li\u003e\n\u003cli\u003eFlush-mount installation with engage (snap) fastening for standard IDEA supports and cover frames\u003c\/li\u003e\n\u003cli\u003eScrewed terminal connections for secure wiring terminations inside a panel\u003c\/li\u003e\n\u003cli\u003eVariant options for Color (Gray or Ivory) and Indicator (with or without)\u003c\/li\u003e\n\u003cli\u003eMaximum 200 W for self-ballasted lamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis switch is offered in multiple configurations to match your panel finish and whether you want an indicator on the rocker.\u003c\/p\u003e\u003cp\u003eAcross the range, the functional format remains a 2-pole, 1-way, 16 AX, 250 V~ IDEA modular switch. The options that vary are the face color and the presence of an indicator.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16016: Color Gray, No Indicator. A plain rocker that keeps the panel look clean and avoids any visible glow at night.\u003c\/li\u003e\n\u003cli\u003eVM16016.B: Color Ivory, No Indicator. The same basic rocker function in a lighter face color for matching Ivory installations.\u003c\/li\u003e\n\u003cli\u003eVM16016.F: Color Gray, With Indicator. The indicator gives you a quick visual reference in low light, useful when moving through the cabin at night.\u003c\/li\u003e\n\u003cli\u003eVM16016.F.B: Color Ivory, With Indicator. Combines the lighter face color with an indicator for the same day-to-day switching function.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a 1-module mechanism intended for Vimar IDEA modular supports, frames, and cover plates. It is a good fit when the vessel already uses IDEA components and you want a matching switch body behind the finished faceplate.\u003c\/p\u003e\u003cp\u003ePanel space planning is straightforward because the module footprint stays consistent, but always confirm rear clearance behind the mounting location. The non-indicator mechanism depth is about 46.00 mm with a built-in depth around 32.50 mm, and some configurations can differ.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThe switch mounts flush and locks in with a snap fastening into the correct IDEA support. Wiring lands on screwed terminals, which works well for tidy terminations inside a protected console or cabin switch panel.\u003c\/p\u003e\u003cp\u003eBecause this is a 250 V~ AC switch, it belongs in your vessel’s AC distribution scheme, not on typical 12 V or 24 V DC house circuits. Wire it in line with how your boat handles conductor switching and isolation on the AC side, and make sure the upstream protection and conductor sizing match the circuit being controlled.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eTypical onboard uses include switching cabin lighting circuits, controlling AC-fed accessories in an interior console, or adding a matching control point in an IDEA-fitted panel. Indicator versions are helpful where you want to locate the switch quickly in low ambient light without adding a separate locator lamp.\u003c\/p\u003e\u003cp\u003eThis product is a strong match for owners and builders standardizing on Vimar IDEA modules who need a 2-pole switch format for an AC branch circuit in a dry interior location.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the switch out of direct spray and away from wet lockers or exterior helm positions, since IP40 is not a washdown rating. For cleaning, wipe the rocker and faceplate with a lightly damp cloth and avoid aggressive solvents that can haze or soften thermoplastic surfaces.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory \/ No Indicator","offer_id":51550890950902,"sku":"APL003619-V6","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Ivory \/ With Indicator","offer_id":51550890983670,"sku":"APL003619-V7","price":29.37,"currency_code":"USD","in_stock":false},{"title":"Gray \/ With Indicator","offer_id":51550891016438,"sku":"APL003619-V0","price":28.25,"currency_code":"USD","in_stock":true},{"title":"Gray \/ No Indicator","offer_id":51550891049206,"sku":"APL003619-V4","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364071_apl003619_jpeg.jpg?v=1787803733"},{"product_id":"apl168071","title":"Vimar Idea SICURY Bpresa Socket Outlet, Italian Standard P17\/11, 2P+E 16A 250V, C16 RCBO, 10mA, 3 Modules","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea is a 2P+E 16 A 250 V SICURY Bpresa socket outlet for the Italian P17\/11 standard, built as a 3-module flush-mounted device with an interlocked 1P+N C16 residual current breaker with overcurrent protection. It runs on 230 V~ 50 Hz, carries a 10 mA rated fault current threshold, and has 3000 A breaking capacity.\u003c\/p\u003e\u003cp\u003eOn board, this type of outlet makes sense in a protected interior AC circuit where you need an Italian standard receptacle and local protection at the point of use, such as a cabin, galley, or service area on a 230 V \/ 50 Hz system. Its IP20 rating means it belongs in a dry interior location and not in spaces exposed to spray, washdowns, or open-weather deck conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eItalian standard P17\/11 SICURY Bpresa socket outlet rated at 2P+E 16 A, 250 V\u003c\/li\u003e\n\u003cli\u003eInterlocked 1P+N C16 residual current breaker with overcurrent protection, 10 mA rated fault current, and 3000 A breaking capacity\u003c\/li\u003e\n\u003cli\u003e3-module flush-mounted format for the Vimar Idea range\u003c\/li\u003e\n\u003cli\u003eScrewed terminals, enhanced contact protection, and integrated on\/off switching\u003c\/li\u003e\n\u003cli\u003eIP20 thermoplastic body with matt finish, label space, and function lighting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eThe listed variants change by color. Across both versions, the electrical format stays the same: 2P+E 16 A 250 V, Italian standard P17\/11, 230 V~ 50 Hz supply, 10 mA fault current protection, 3000 A breaking capacity, IP20 protection, and a 3-module flush-mounted body with screwed terminals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16283.B, Color Ivory. This lighter finish suits interior spaces where the outlet should blend into pale trim, liners, or cabin furniture.\u003c\/li\u003e\n\u003cli\u003eVM16283, Color Gray. This darker finish gives a more technical look that sits well in utility areas, helm-side panels, or refit work where surrounding hardware is darker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe body measures 74.8 mm wide, 50.1 mm high, and about 57.3 to 57.4 mm deep depending on variant. Flush mounting and snap engagement suit fixed interior panels in the Vimar Idea system, and the screwed terminals fit hard-wired AC connections where a clean, built-in finish is needed.\u003c\/p\u003e\u003cp\u003eThe housing is plastic with a thermoplastic body and a matt surface. Before fitting it into a boat panel, it is worth checking rear clearance and wiring space, especially when replacing a simpler outlet with no integrated protective device.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis outlet should be used on 230 V AC, 50 Hz circuits only. The Italian P17\/11 format matters when matching existing onboard outlets, shore-powered accommodation circuits, or inverter-fed circuits that are already set up around this plug pattern.\u003c\/p\u003e\u003cp\u003eBecause the unit combines the socket outlet with fault current and overcurrent protection, it works well where the point of use needs its own protected connection. The label area and function lighting also help when the installation includes multiple AC services in one interior panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a sensible match for boats with European style AC installations that already use Italian domestic fittings or need to keep the same outlet standard during a refit. It is a better fit for cabins, galleys, and enclosed service spaces than for cockpits, exterior bulkheads, or wet lockers where a sealed outlet would be the right choice.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550899667190,"sku":"APL168071-V0","price":405.44,"currency_code":"USD","in_stock":false},{"title":"Ivory","offer_id":51550899699958,"sku":"APL168071-V6","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364301_apl168071_jpeg.jpg?v=1787803914"},{"product_id":"apl588064","title":"Vimar Idea SICURY 2P+E Universal Socket Outlet, 16A 250V, 2-Module, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16210 SICURY socket outlet is a 2-module universal outlet rated at 16 A and 250 V for flush-mounted installations. It uses the IDEA module format, includes SICURY contact protection, and carries an IP20 rating, so it suits protected interior spaces on board rather than exposed deck areas or wet lockers.\u003c\/p\u003e\u003cp\u003eIt accepts 2.5 A Europlugs, 2P and 2P+E 10 A and 16 A Italian plugs, 2P+E 16 A German plugs, and 2P 15 A 125 V American plugs with non-polarized flat blades. With a 2P+E 16 A 250 V French standard plug, the earth connection is not realized. The body measures 49.80 mm wide, 50.10 mm high, and 41.90 mm deep.\u003c\/p\u003e\u003cp\u003eThis is a plain AC outlet with screwed terminals, a front label space, and no hinged lid, USB charger, or built-in switch. On a boat, it makes sense where the vessel already uses Vimar IDEA hardware and needs a compact shore-power or inverter-fed outlet in a dry cabin, galley, or navigation area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e16 A, 250 V universal outlet in the Vimar IDEA 2-module format\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection built into the outlet face\u003c\/li\u003e\n\u003cli\u003eAccepts Euro, Italian 10 A and 16 A, German 16 A, and non-polarized American 15 A 125 V flat-blade plugs\u003c\/li\u003e\n\u003cli\u003eFlush-mounted body with screwed terminal connection and front label space\u003c\/li\u003e\n\u003cli\u003eIP20 thermoplastic construction with halogen-free material and matte finish\u003c\/li\u003e\n\u003cli\u003eFrench 2P+E 16 A 250 V plugs can be inserted, but the earth connection is not realized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in multiple color configurations.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical format stays the same: one 16 A, 250 V universal outlet in a 2-module flush-mounted body with SICURY contact protection, screwed terminals, and IP20 protection. The confirmed difference between variants is the face color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16210.B: Color Ivory. This is the light finish in the range and keeps the outlet understated against pale interior trim.\u003c\/li\u003e\n\u003cli\u003eVM16210.R: Color Red. The red face stands out quickly, which helps when circuits need fast visual identification on a panel or cabin wall.\u003c\/li\u003e\n\u003cli\u003eVM16210: Color Gray. The gray finish blends more easily into darker switch panels and utility spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet belongs on an AC circuit, not on a 12 V or 24 V DC branch. For marine refits, the main fit check is the vessel's use of Vimar IDEA support hardware and the available space for a 2-module flush-mounted device.\u003c\/p\u003e\u003cp\u003eBecause the front is IP20, it is better suited to enclosed locations such as cabins, saloons, chart tables, and similar protected areas. It is not the right match for open cockpits, deck washdown zones, or any mounting point that sees regular spray.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eThe screwed terminal layout is familiar for conventional wiring work and works well where a fixed AC outlet is being added or replaced during a panel refit. The label space is useful when the outlet is tied to a specific shore-power, inverter, or dedicated onboard circuit.\u003c\/p\u003e\u003cp\u003eThis makes sense for boat owners and yards that want an outlet face consistent with the rest of an IDEA-based interior while keeping plug compatibility broad for common European and some American plug types used aboard.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550906974454,"sku":"APL588064-V9","price":33.25,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51550907007222,"sku":"APL588064-V8","price":35.75,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":51550907039990,"sku":"APL588064-V4","price":33.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364206_apl588064_jpeg.jpg?v=1787804103"},{"product_id":"apl640577","title":"Vimar Sicury German\/French to Italian Plug Adapter, 2P+E, 250V, 16A, 1500W, P17\/11 Socket","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar SICURY is a 1-way plug adaptor with a 2P+E 16 A German\/French plug on one side and a 2P+E 16 A Italian standard P17\/11 socket on the other. It is rated for 250 V with a maximum load of 1500 W, so it is used when equipment with an Italian plug needs to connect to a German or French style outlet.\u003c\/p\u003e\u003cp\u003eThis is a portable adaptor rather than a fixed wiring device. It makes sense for temporary connections where plug formats do not match, including onboard use in protected interior spaces, service areas, or dockside settings where a quick plug-format change is needed without altering the vessel’s installed sockets.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E 16 A German\/French plug with 2P+E 16 A Italian standard P17\/11 socket outlet\u003c\/li\u003e\n\u003cli\u003e250 V rating with maximum load up to 1500 W\u003c\/li\u003e\n\u003cli\u003eSingle-outlet adaptor format for one connected device or one lead at a time\u003c\/li\u003e\n\u003cli\u003ePortable body for temporary use where installed outlets and equipment plugs follow different standards\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white with the same electrical format across both versions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two colour options. The electrical layout stays the same across both versions, including the 250 V rating, 1500 W maximum load, 2P+E 16 A German\/French plug, and Italian P17\/11 socket outlet.\u003c\/p\u003e\u003cp\u003eThe difference between variants is the exterior finish, which can matter when the adaptor will stay visible in a cabin, galley, workshop area, or service locker.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM00301: Black. A darker finish that blends in with black leads, chargers, and service equipment.\u003c\/li\u003e\n\u003cli\u003eVM00301.B: White. A lighter finish that is easier to match with white interiors and light-coloured electrical accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCheck the connection direction before ordering. This adaptor plugs into a German or French style receptacle and gives you an Italian P17\/11 outlet. It is not the reverse arrangement.\u003c\/p\u003e\u003cp\u003eIt changes plug format only. The connected equipment still needs to match the available supply and stay within the adaptor’s 1500 W load limit.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eThe portable format suits temporary use rather than permanent onboard wiring. It is a practical match for boats that move between marinas, service points, or storage facilities where German or French outlet standards may be present while onboard portable equipment uses an Italian plug format.\u003c\/p\u003e\u003cp\u003eFor marine use, it is best kept in a protected location and used as a portable accessory rather than as part of a fixed electrical installation.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black","offer_id":51550910349558,"sku":"APL640577-4","price":7.15,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550910382326,"sku":"APL640577-9","price":7.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827731_apl640577.jpg?v=1787804205"},{"product_id":"apl658362","title":"Vimar Idea SICURY French Standard Socket Outlet, 2P+E, 16A, 250V, 2 Modules, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea is a 2P+E 16 A 250 V SICURY socket outlet for French standard plugs, built in the Idea 2-module format. It uses screw terminals, has enhanced contact protection, and carries an IP20 rating for enclosed interior installations.\u003c\/p\u003e\u003cp\u003eOn board, this type of outlet fits cabins, saloons, galleys, and other finished spaces where the electrical system uses French standard sockets and the surrounding hardware is from the Vimar Idea range. The insert measures 49.8 x 50.1 x 35.5 mm and uses a matt thermoplastic body that is halogen-free.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E French standard socket outlet rated 16 A at 250 V\u003c\/li\u003e\n\u003cli\u003eFits the Vimar Idea modular system in a 2-module layout\u003c\/li\u003e\n\u003cli\u003eScrew terminal connection for fixed wiring\u003c\/li\u003e\n\u003cli\u003eEnhanced contact protection at the outlet face\u003c\/li\u003e\n\u003cli\u003eFlush-mounted device body measuring 49.8 x 50.1 x 35.5 mm\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic housing with matt finish\u003c\/li\u003e\n\u003cli\u003eIP20 protection for enclosed interior locations\u003c\/li\u003e\n\u003cli\u003eFront label and information surface for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eAcross both variants, the outlet format, 16 A 250 V rating, 2-module size, screw terminal connection, and IP20 protection stay the same. The difference is the visible front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16212.B, Color Ivory. This lighter finish works well where the surrounding trim and faceplates are off-white.\u003c\/li\u003e\n\u003cli\u003eVM16212, Color Gray. This darker finish sits more quietly with gray switchgear or darker interior panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet suits installations already built around Vimar Idea supports and cover plates, and it occupies one 2-module position in that system. It is made for French standard plug geometry, so the onboard AC fittings and plug type need to match that standard.\u003c\/p\u003e\u003cp\u003eBecause the housing is IP20, it belongs in cabins and other enclosed areas where it is kept away from direct spray, washdowns, and open-weather exposure. It is not meant for exterior decks, cockpits, or locker spaces that stay damp.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe screw terminals suit permanent wiring by a qualified installer, and the flush-mounted body fits best in finished panels or wall sections where mounting depth has already been planned. The front also includes a label space, which helps when circuits are identified by shore power source, inverter feed, or cabin zone.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550918639862,"sku":"APL658362-V2","price":21.57,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":51550918672630,"sku":"APL658362-V6","price":20.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364216_apl658362_jpeg.jpg?v=1787804467"},{"product_id":"apl601565","title":"Vimar ARKÉ Master Dimmer, 120V 60Hz, Phase-Cut, 3-200W LED","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar MASTER dimmer 120V is a push-button universal dimmer for 120 V~ 60 Hz AC lighting circuits, using phase-cut dimming for a mix of dimmable load types. It supports 40-400 W incandescent, 40-300 VA electronic transformers, 10-200 W dimmable CFL, and 3-200 W dimmable LED loads when the lamp or driver is rated for phase-cut dimming.\u003c\/p\u003e\u003cp\u003eOn board, this style of dimmer is commonly used on boats with 120 V AC cabin or saloon lighting fed from shore power or an inverter. The unit is rated IP40 and is meant for protected interior mounting, not exposed cockpit or deck locations where spray and washdowns are expected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120 V~ 60 Hz universal dimming with phase-cut control\u003c\/li\u003e\n\u003cli\u003eSupported loads: 40-400 W incandescent, 40-300 VA electronic transformers, 10-200 W dimmable CFL, 3-200 W dimmable LED\u003c\/li\u003e\n\u003cli\u003eON\/OFF control plus dimming from the built-in push control\u003c\/li\u003e\n\u003cli\u003eCan be controlled from multiple points using normally-open (momentary) push buttons\u003c\/li\u003e\n\u003cli\u003eMinimum brightness adjustment to help prevent LED dropout at low levels\u003c\/li\u003e\n\u003cli\u003eLocator feature that remains visible in darkness\u003c\/li\u003e\n\u003cli\u003eFlush-mount device with screw terminals; click fixing; IP40 for dry interior areas\u003c\/li\u003e\n\u003cli\u003eOffered in three front colors: grey, white, and metal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple color finishes to match different switch plates and interior themes.\u003c\/p\u003e\u003cp\u003eThe variants differ by visible color only. Electrical rating, functions, and load handling remain the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19135.1.120: Color Grey. A neutral finish that blends well in service areas and understated interiors.\u003c\/li\u003e\n\u003cli\u003eVM19135.1.120.B: Color White. A clean look that suits bright headliners and light-colored bulkheads.\u003c\/li\u003e\n\u003cli\u003eVM19135.1.120.M: Color Metal. A metallic face that pairs naturally with stainless hardware and modern helm styling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an in-wall, flush-mount module intended for Vimar ARKÉ wiring device installations. Allow clearance behind the panel: the device body is approximately 50.7 mm deep, with a front module size around 22.3 mm wide and 49 mm high. It is not intended for Isoset enclosures.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eWiring is typically a line and load connection with optional normally-open push buttons for multi-point control. Keep all controlled lamps and drivers consistent on the same circuit, and confirm every load is explicitly rated as dimmable with phase-cut control before commissioning. Set the minimum brightness so LEDs stay stable without flicker at low levels.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis dimmer is a good match for boats that run 120 V AC lighting in cabins, berths, or lounge areas and want a familiar wall control with low-level lighting for night passages or dockside living. It is not a controller for 12 V or 24 V DC lighting circuits.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eUse a dry or lightly damp cloth on the front surface. Avoid spray cleaners and keep the device out of areas exposed to saltwater mist, washdowns, or direct weather.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550930993398,"sku":"APL601565-V2","price":135.0,"currency_code":"USD","in_stock":false},{"title":"Metal","offer_id":51550931026166,"sku":"APL601565-V3","price":144.0,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550931058934,"sku":"APL601565-V1","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312083_apl601565.jpg?v=1787804847"},{"product_id":"apl479064","title":"Vimar Idea TORCIA Hand Lamp, 230V, LED, 2 Modules, 2-Hour Runtime","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea TORCIA hand lamp is a built-in 2-module emergency and portable light for 230 V~ 50-60 Hz installations. It combines a fixed charging point with a removable LED hand lamp, so it stays docked and charged in normal use and can be lifted out when light is needed away from the wall point. Runtime is approximately 2 hours after charging, and the replaceable 4-element Ni-MH 4.8 V 80 mAh battery charges in about 48 hours.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for boats that use a 230 V AC domestic circuit and Vimar Idea modular devices in protected interior spaces. With IP40 protection, Class II construction, and a built-in depth of 39.2 mm, it suits cabin, passageway, and service-area installations where the unit stays sheltered from spray and washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in 2-module format for Vimar Idea installations\u003c\/li\u003e\n\u003cli\u003e230 V~ 50-60 Hz AC supply with max system power of 1 W\u003c\/li\u003e\n\u003cli\u003eRemovable LED hand lamp with automatic emergency function during power loss\u003c\/li\u003e\n\u003cli\u003eReplaceable 4-element Ni-MH 4.8 V 80 mAh battery with about 2 hours of operating time\u003c\/li\u003e\n\u003cli\u003eBattery charging time of approximately 48 hours\u003c\/li\u003e\n\u003cli\u003eCharging connection uses ø 4 mm pins with 19 mm spacing and a matching socket outlet\u003c\/li\u003e\n\u003cli\u003eSlide switch for portable on and off control and for enabling or disabling the auxiliary-light function\u003c\/li\u003e\n\u003cli\u003ePlastic housing with IP40 protection and Class II insulation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same Idea TORCIA format.\u003c\/p\u003e\u003cp\u003eThe visible finish changes between variants. Across both versions, the lamp format stays the same at 2 modules with 230 V~ 50-60 Hz supply, a rechargeable Ni-MH battery, and approximately 2 hours of light after charging.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16450: Gray. This version changes the visible trim color while keeping the same charging and emergency-light function.\u003c\/li\u003e\n\u003cli\u003eVM16450.B: Ivory. This version keeps the same lamp and charging setup with a lighter finish for matching surrounding devices and plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe unit is built for a flush-mounted 2-module position in the Vimar Idea range. The front width is 49.7 mm and the built-in depth is 39.2 mm, so it helps to confirm space behind the plate before ordering, especially where liner panels or shallow boxes reduce clearance.\u003c\/p\u003e\u003cp\u003eThe charging side uses ø 4 mm pins with 19 mm spacing. On board, that matters most when replacing an existing TORCIA point or planning a matching new installation within a compatible Idea layout.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lamp makes sense in protected interior spaces where losing AC supply would leave a walkway, cabin, or service point dark. Once removed from the charging socket, it works as a portable light for short checks around the boat, rather than as a deck light for exposed areas.\u003c\/p\u003e\u003cp\u003eIt suits boats with a 230 V AC interior system that need a built-in emergency light point without adding a separate handheld torch to the cabin. The IP40 rating points it toward dry, sheltered locations rather than open exterior mounting.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550932271350,"sku":"APL479064-V5","price":185.05,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":51550932304118,"sku":"APL479064-V9","price":185.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364444_apl479064_jpeg.jpg?v=1787804893"},{"product_id":"apl707028","title":"Vimar ARKÉ 2P+E USA+EU SICURY Socket Outlet, 2 Modules, 16A 250V, Flush-Mounted, Screw Terminal, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series is a 2P+E USA+EU SICURY outlet range for installations that need a polarized Euro-American socket in a 2-module format. Across the listed versions, the outlet is rated 16 A at 250 V, runs at 50 to 60 Hz, and measures 44.8 x 49 x 36 mm, which helps when you are checking panel depth and module space before a refit.\u003c\/p\u003e\u003cp\u003eThis outlet uses screw terminals for fixed wiring and a flush-mounted snap-engagement format that fits the ARKÉ modular system. Enhanced contact protection is built in, and the body is halogen-free thermoplastic with an IP20 rating, so it makes more sense in protected interior spaces than in areas exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePolarized Euro-American 2P+E socket format for mixed USA and EU plug compatibility\u003c\/li\u003e\n\u003cli\u003eRated 16 A, 250 V, 50 to 60 Hz for standard AC outlet circuits\u003c\/li\u003e\n\u003cli\u003e2-module body sized at 44.8 x 49 x 36 mm for flush installations with limited panel depth\u003c\/li\u003e\n\u003cli\u003eScrew-terminal connection for fixed wiring behind the panel\u003c\/li\u003e\n\u003cli\u003eSnap-engagement mounting for ARKÉ modular installations\u003c\/li\u003e\n\u003cli\u003eEnhanced contact protection built into the outlet\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with IP20 protection for dry interior locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple finish configurations within the same ARKÉ outlet format.\u003c\/p\u003e\u003cp\u003eAcross the listed variants, the electrical rating, 2-module body, screw-terminal connection, flush-mounted installation, and IP20 indoor-use profile stay the same. The change between versions is the finish label shown for each part number.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19248: Finish Grey. This version keeps a subdued look on darker cabin furniture, switch panels, and technical interior spaces.\u003c\/li\u003e\n\u003cli\u003eVM19248.M: Finish Metal. This gives the outlet a metallic-looking face for installations that use metal-toned hardware and trim.\u003c\/li\u003e\n\u003cli\u003eVM19248.B: Finish White\/Antibacterial. This version keeps a light appearance on white or pale interior panels and accommodation spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is a better match for cabins, saloons, galleys, and helm interiors where the mounting surface stays dry and protected. On boats, that matters because IP20 is suited to interior locations, not open deck, cockpit coamings, or any spot that sees direct spray, rain, or washdown water.\u003c\/p\u003e\u003cp\u003eIt also helps to confirm that your project uses the Vimar ARKÉ modular system and has space for a 2-module device before ordering. For mixed-use vessels and international crews, the polarized Euro-American socket format can simplify outlet selection where both USA and EU style plugs may be encountered.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe screw-terminal connection is useful when the outlet is being wired into a fixed AC circuit behind a flush panel. Check conductor sizing, circuit protection, and the rest of the mounting hardware against the vessel's electrical plan before installation, especially on 230 V systems and when refitting an existing panel cutout.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White\/Antibacterial","offer_id":51550949277942,"sku":"APL707028-5","price":11.96,"currency_code":"USD","in_stock":false},{"title":"Metal","offer_id":51550949310710,"sku":"APL707028-1","price":12.75,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550949343478,"sku":"APL707028-7","price":11.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1268031_apl707028.jpg?v=1787805354"},{"product_id":"apl495331","title":"Vimar Idea 2-Way Rocker Switch, 1P 10 AX, 250V, IP40, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16004 is a one-module 2-way rocker switch for 250 V circuits, rated at 10 AX, with support for self-ballasted lamps up to 100 W. It fits the Vimar Idea modular system and uses screw terminals, snap fastening, and a thermoplastic body with a matt finish.\u003c\/p\u003e\u003cp\u003eThis switch is used when one light needs control from two locations, such as a cabin entrance and berth area or two access points in a passageway. With IP40 protection, it belongs in interior spaces that stay sheltered, not on exposed decks or in areas that see washdowns or regular spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-way switching layout for one lighting circuit controlled from two points\u003c\/li\u003e\n\u003cli\u003eRated 10 AX at 250 V, with a 100 W limit for self-ballasted lamps\u003c\/li\u003e\n\u003cli\u003eOne-module Idea mechanism with flush-mounted installation\u003c\/li\u003e\n\u003cli\u003eScrew terminal connections with snap-in fastening\u003c\/li\u003e\n\u003cli\u003eThermoplastic, halogen-free body with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection for protected interior locations\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same switch format.\u003c\/p\u003e\u003cp\u003eAcross the two variants, the switching function, 10 AX \/ 250 V rating, one-module format, flush mounting, and IP40 protection stay the same. The visible change is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16004.B: Color Ivory. This version suits installations with lighter trim, plates, or interior finishes.\u003c\/li\u003e\n\u003cli\u003eVM16004: Color Gray. This version matches gray device layouts and darker surrounding trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is made for flush-mounted modular installations and takes one module position in the Idea system. The body measures 24.8 mm wide, 50.1 mm high, and 36.5 mm deep, with a built-in depth of 23.3 mm, which helps when checking box depth and clearance behind the mounting surface.\u003c\/p\u003e\u003cp\u003eThe unit does not include a mounting plate on the mechanism itself, so it should be matched with the correct support and cover components from the same system.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn a boat, this switch makes sense where a vessel uses a modular mains-voltage switching layout in protected interior areas. It is a practical fit for cabins, saloons, passageways, or other dry accommodation spaces where a clean flush-mounted finish matters and the switch is kept away from direct water exposure.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550949376246,"sku":"APL495331-V6","price":14.81,"currency_code":"USD","in_stock":false},{"title":"Ivory","offer_id":51550949409014,"sku":"APL495331-V9","price":14.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364065_apl495331_jpeg.jpg?v=1787805361"},{"product_id":"apl815358","title":"Vimar EIKON RJ45 Slating Adaptor, For RJ45 Keystone Connectors","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON RJ45 slating adaptor is a transition adaptor for fitting an RJ45 Keystone connector into a Vimar Netsafe structured wiring and EIKON device layout. The body measures 22.3 x 49 x 26.1 mm and includes a front label space, which helps when you need to identify network drops at a glance.\u003c\/p\u003e\u003cp\u003eOn board, this type of adaptor suits enclosed interior installations where you want an RJ45 outlet to sit neatly with the rest of the switching range, such as a nav station, cabin media area, or communications panel. It is the visible adaptor piece at the outlet, so the network category and termination are set by the Keystone connector fitted behind it.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTakes an RJ45 Keystone connector in Vimar EIKON and Netsafe structured wiring installations.\u003c\/li\u003e\n\u003cli\u003e22.3 x 49 x 26.1 mm body size for checking clearance in panels, boxes, and furniture cutouts.\u003c\/li\u003e\n\u003cli\u003eFront label space for marking network ports and cable runs.\u003c\/li\u003e\n\u003cli\u003eNo hinged lid on the front, which keeps the socket easy to access in protected interior locations.\u003c\/li\u003e\n\u003cli\u003eThree finish options across the range: grey RAL 7024, silver RAL 9022, and white RAL 9016.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in three color configurations so the finished outlet can match the surrounding EIKON trim.\u003c\/p\u003e\u003cp\u003eThe difference between variants is the finish. The RJ45 Keystone format, front label space, and 22.3 x 49 x 26.1 mm dimensions stay the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20343.K: Grey, RAL 7024. This is the darkest finish in the range and blends more naturally with darker switch surrounds and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM20343.K.N: Silver, RAL 9022. This finish suits installations where the surrounding trim already uses a silver tone.\u003c\/li\u003e\n\u003cli\u003eVM20343.K.B: White, RAL 9016. This keeps the outlet visually light on white cabin liners, lockers, and switch areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adaptor is part of the EIKON and Netsafe system family, so it makes sense when the rest of the installation already follows that format. Because there is no front lid, it suits protected interior positions rather than open deck or washdown locations.\u003c\/p\u003e\u003cp\u003eIt is a sensible fit for refits that add tidy RJ45 points for a router, switch, onboard PC, or entertainment network without breaking the look of an existing EIKON panel.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550950359286,"sku":"APL815358-4","price":14.25,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550950392054,"sku":"APL815358-3","price":15.5,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550950424822,"sku":"APL815358-5","price":14.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828221_apl815358.jpg?v=1787805390"},{"product_id":"apl213135","title":"Vimar 8000 Series 1-Way Luminous Rocker Switch, For Signalling Unit, No Signalling Unit Included, 10AX 250V, IP40, Flush-Mount, 1-Module, Beige","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08037 is a 1-pole, 1-way rocker switch module with a luminous window for signalling or orientation lighting in the Vimar 8000 Series system. It is rated 10AX at 250 V AC, with support for self-ballasted lamps up to 100 W (IEC 60669-1:2017), and it carries an IP40 rating for protected locations.\u003c\/p\u003e\u003cp\u003eThe illumination function uses an exchangeable LED signalling unit, and the switch is supplied without the signalling unit. Wiring lands on screw terminals, and the module installs flush in a compatible frame with a snap engagement fit.\u003c\/p\u003e\u003cp\u003eFor boat use, this is the kind of switch that belongs in enclosed areas such as cabins, heads, saloons, or protected helm panels where it will not be exposed to direct spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module insert for Vimar 8000 Series installations\u003c\/li\u003e\n\u003cli\u003e1P, 1-way rocker action, rated 10AX at 250 V AC\u003c\/li\u003e\n\u003cli\u003eLuminous window supports control lighting and orientation lighting when a signalling unit is fitted\u003c\/li\u003e\n\u003cli\u003eLED lighting element is exchangeable; signalling unit is not included with the switch\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation with snap engagement fastening\u003c\/li\u003e\n\u003cli\u003eScrew terminal connections for straightforward wiring in panels and bulkheads\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with untreated matte finish in beige (similar to RAL 9001)\u003c\/li\u003e\n\u003cli\u003eIP40 rating for protected interior mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a Vimar 8000 Series modular device in a 1-module size. It pairs with the appropriate 8000 Series mounting frame and cover plate for your panel layout, so it is worth matching the module count and plate style already installed on board.\u003c\/p\u003e\u003cp\u003eFront size is 22.0 mm wide by 50.1 mm high. Allow for 35.5 mm overall depth, with 24.0 mm built-in depth behind the mounting surface.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the module flush in the correct back box or panel support, then engage it into the frame using the snap fit. Connect the incoming feed and switched output at the screw terminals, keeping the circuit within the switch rating and the connected lamp load within the stated limits.\u003c\/p\u003e\u003cp\u003eIf you want the rocker to light for wayfinding, fit the compatible signalling unit so the LED can be used for control or orientation lighting depending on how the circuit is configured.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch is a practical match for refits and new builds that use Vimar 8000 Series devices and want a switch you can find quickly at night without turning on overhead lights. It also works well where clear labeling matters, since the front includes a label space for identifying circuits on multi-switch panels.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550999544054,"sku":"APL213135","price":20.01,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826824_apl-7tq-7f6-4tc.jpg?v=1787806226"},{"product_id":"apl799604","title":"Vimar Plana 2P+E Australian SICURY Socket Outlet, 15A, 250V, 2-Module, Flush-Mounted","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2P+E Australian SICURY outlet range with two finish options, built in a flush-mounted 2-module format and rated for 15A at 250V. It uses the Australian standard AS\/NZS 3112 type I pattern, has screwed terminal connections, and measures 44.8 x 49.0 x 38.7 mm.\u003c\/p\u003e\u003cp\u003eThis is a single unswitched outlet for interior AC installations where a neat flush fit matters and panel depth is limited. Enhanced contact protection and a halogen-free thermoplastic body make it well suited to cabins, saloons, galleys, and other protected areas on board. With an IP20 rating, it belongs in dry interior spaces rather than open deck or washdown locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAustralian standard AS\/NZS 3112 type I socket outlet in a 2P+E single-outlet layout\u003c\/li\u003e\n\u003cli\u003eRated for 15A, 250V, and 50 to 60 Hz circuits\u003c\/li\u003e\n\u003cli\u003eFlush-mounted 2-module body with device size of 44.8 x 49.0 x 38.7 mm\u003c\/li\u003e\n\u003cli\u003eScrewed terminal connection for fixed wiring installations\u003c\/li\u003e\n\u003cli\u003eEnhanced contact protection at the outlet face\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with a glossy surface\u003c\/li\u003e\n\u003cli\u003eIP20 rating for dry interior mounting positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in multiple finish configurations within the same Plana format.\u003c\/p\u003e\u003cp\u003eAcross both variants, the outlet type, 15A 250V rating, AS\/NZS 3112 type I pattern, flush-mounted 2-module body, screwed terminals, IP20 protection, and 44.8 x 49.0 x 38.7 mm dimensions stay the same. The difference is the visible finish and surface treatment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14262: White, RAL 9003, with an untreated glossy surface. This version keeps the outlet face light and unobtrusive on white or pale interior panels.\u003c\/li\u003e\n\u003cli\u003eVM14262.SL: Silver, RAL 9006, with a lacquered glossy surface. This version gives a darker visual contrast where the surrounding trim or switch gear is silver-toned.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is made for flush mounting and occupies two modules within the Plana range. For boat refits, the main fit checks are the Australian type I outlet requirement, a 15A 250V circuit, enough rear depth for the 38.7 mm body, and a dry interior mounting position that keeps the face away from spray and direct water exposure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits boats that use Australian-format AC outlets in accommodation spaces, enclosed helm areas, or similar interior panels. It is also a sensible match when replacing an existing Plana outlet or keeping cabin power points consistent across a refit where a flush front matters.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51551012716790,"sku":"APL799604-2","price":15.85,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51551012749558,"sku":"APL799604-1","price":20.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827617_apl799604.jpg?v=1787806602"},{"product_id":"apl494973","title":"Vimar Eikon 1-Way Switch Mechanism, 16AX 250V, Lightable, Anthracite, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20001.0 is a 1-way (single pole) switch mechanism rated 16 AX, 250 V~ with optional illumination, sized for flush mounting and finished in anthracite (RAL 7024) with a matte surface. It snaps into place as a modular domestic switching device and uses screwed terminals for the wiring connections.\u003c\/p\u003e\u003cp\u003eThis is the internal switching mechanism that gets completed with a compatible Eikon button in 1-, 2-, or 3-module formats, depending on the look and layout of your switch position. The 16AX rating is intended for switching loads with higher inrush, and the mechanism is specified up to 200 W for self-ballasted lamps.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, 1-way switch mechanism rated 16 AX, 250 V~ (16 A).\u003c\/li\u003e\n\u003cli\u003eOptional illumination for control and orientation with an exchangeable LED element.\u003c\/li\u003e\n\u003cli\u003eBuilt to complete with 1-, 2-, or 3-module button styles in the Eikon modular system.\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation with engage (snap) fastening and no mounting plate.\u003c\/li\u003e\n\u003cli\u003eScrewed terminal connections for secure conductor clamping in vibrating environments.\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free; IP40 for protected interior locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is part of the Eikon modular device format (1 module) and is meant to be paired with the appropriate Eikon button and faceplate system used on many yachts and European-style interiors. The device body measures 22.30 mm wide by 49.00 mm high, with an overall depth of 34.60 mm and a built-in depth of 25.00 mm, which helps when checking clearance behind a bulkhead panel or inside a helm console.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIt is intended for flush mounting and uses snap fastening, which is handy when assembling multi-gang stations in a cabin or at the helm. Wiring lands on screwed terminals, so take the time to prep conductors cleanly, keep strands contained, and leave enough service loop to avoid tension on the terminals once the button and plate are fitted.\u003c\/p\u003e\u003cp\u003eBecause the protection rating is IP40, plan the mounting position for areas kept out of direct spray and washdowns. In spots that see moisture or routine deck cleaning, place it behind a suitable protective panel or enclosure so the mechanism stays dry.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis type of 1-way switch is commonly used where you want simple on and off control from a single location, such as switching an interior lighting circuit, controlling a ventilation feed, or operating a relay or contactor coil in an AC panel layout. The optional illumination is useful for finding the switch at night without lighting up the whole cabin.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners and builders who are already using the Eikon modular ecosystem and want a consistent look across cabins, salons, and helm stations while keeping electrical hardware standardized.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that the faceplate is seated properly and that there is no movement at the switch position from vibration. If the illumination is used, the LED element is exchangeable, which makes it straightforward to refresh the locator light later without replacing the entire mechanism.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51551064588534,"sku":"APL494973","price":15.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353752_apl494973_jpeg.jpg?v=1787807331"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-devices.oembed?page=2","provider":"Apollo Lighting","version":"1.0","type":"link"}