{"title":"Electrical Distribution","description":"","products":[{"product_id":"apl621763","title":"Vimar Idea 2-Way Switch, 1P, 10 AX, 250 V, 3 Terminals, Central OFF Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16140 is a modular 1-pole 2-way switch for flush-mounted Vimar IDEA installations where you need directional control from one rocker. It uses a 3-terminal layout with directional arrows and a central OFF position, is rated 10 AX at 250 V~, and carries IP40 protection for interior locations.\u003c\/p\u003e\u003cp\u003eOn a boat, this switch fits best in enclosed cabin panels, protected helm stations, and other built-in control points that stay clear of direct spray. The body is made from halogen-free thermoplastic with a matte untreated surface, and it installs with snap fastening in the supporting frame.\u003c\/p\u003e\u003cp\u003eIt also includes a label surface for circuit identification and runs as a non-illuminated switch with no monitoring contact. For self-ballasted lamp loads, the published limit is 100 W.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole 2-way switch with 3 terminals, directional arrows, and a central OFF position\u003c\/li\u003e\n\u003cli\u003e10 AX at 250 V~ for AC switching duties within the stated rating\u003c\/li\u003e\n\u003cli\u003eBuilt-in module with snap fastening for Vimar IDEA flush-mount assemblies\u003c\/li\u003e\n\u003cli\u003eIP40 protection for covered interior panels and other sheltered mounting points\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte surface finish\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit marking and easier panel identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same IDEA switching format.\u003c\/p\u003e\u003cp\u003eAcross both variants, the switching layout stays the same: 1-pole, 10 AX, 250 V~, 3 terminals, central OFF position, built-in snap mounting, and IP40 protection. The visible difference between them is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16140.B: Color Ivory. This version keeps a lighter look on panels and trim where a pale switch finish is preferred.\u003c\/li\u003e\n\u003cli\u003eVM16140: Color Gray. This version suits panels that already use the gray IDEA device color.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis switch is part of the Vimar IDEA series, so it is intended for IDEA-compatible mounting frames, supports, and cover plates. The single-rocker format makes it a straightforward replacement when the rest of the installation already uses the same modular family.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners and installers who need a center-off directional switch in a cabin or enclosed helm panel without changing to a different device range.\u003c\/p\u003e\u003ch6\u003eElectrical and placement\u003c\/h6\u003e\u003cp\u003eThe confirmed rating is for AC service at 250 V~ and 10 AX. For onboard use, that makes it better suited to cabin and helm switching points that stay sheltered, rather than exposed deck locations or washdown areas. IP40 is appropriate where the switch is protected from direct water exposure.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550269767926,"sku":"APL621763-V8","price":29.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550269800694,"sku":"APL621763-V0","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364173_apl013685_jpeg.jpg?v=1787789373"},{"product_id":"apl208483","title":"BEP 3-Position SPDT Push-Pull Switch - OFF\/ON1\/ON1 \u0026 2 1001301","description":"\u003cp\u003e\u003cstrong\u003e3-Position SPDT Push-Pull Switch - OFF\/ON1\/ON1 \u0026amp; 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, double throw switch turns on position 1 or position 1 and 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty, noncorrosive construction with moisture-repellent insulators\u003c\/li\u003e\n\u003cli\u003eBrass case, stem, terminals and mounting hardware\u003c\/li\u003e\n\u003cli\u003eAll knobs are screw-on type\u003c\/li\u003e\n\u003cli\u003eNominal voltage is 6-36V DC.\u003c\/li\u003e\n\u003cli\u003eRated for 10A at 12V DC\u003c\/li\u003e\n\u003cli\u003e#8-36 screw terminals\u003c\/li\u003e\n\u003cli\u003eFits panels up to 1\" thick\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number M-476\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550277140726,"sku":"APL208483","price":23.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1095149_apl208483jpg.jpg?v=1787789473"},{"product_id":"apl511978","title":"Veratron 52mm Acoustic Buzzer - Black B00109001","description":"\u003cp\u003e\u003cstrong\u003e52mm Acoustic Buzzer - Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe acoustic dual-tone buzzer is in black. Mounted like other ViewLine gauges in a standard 52mm hole.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: ViewLine\u003c\/li\u003e\n\u003cli\u003eFunction: Buzzer\u003c\/li\u003e\n\u003cli\u003eType: Multifunction\u003c\/li\u003e\n\u003cli\u003eInput Signal: 12V\/24V\u003c\/li\u003e\n\u003cli\u003eDial Unit Outer:\u003c\/li\u003e\n\u003cli\u003eDial Scale Outer:\u003c\/li\u003e\n\u003cli\u003eInstallation Dimension: 52.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoats\u003c\/li\u003e\n\u003cli\u003eShips\u003c\/li\u003e\n\u003cli\u003eYachts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":51550277697782,"sku":"APL511978","price":80.28,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1107342_apl511978jpg.jpg?v=1787789510"},{"product_id":"apl705215","title":"Vimar Idea IP55 2-Module Surface-Mount Enclosure, For 8000 Special Modules, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13523 is an IP55 surface-mount enclosure for two Vimar Idea modules or two 8000 special modules, used to keep modular switches and outlets protected in splash-prone areas on a boat.\u003c\/p\u003e\u003cp\u003eIt is finished in RAL 7035 grey and comes with two 08491 adaptors for fitting 8000 standard modules. The body is plastic with insulating fill, which suits mounting on insulated panels and helps avoid exposed conductive surfaces around the module area.\u003c\/p\u003e\u003cp\u003eFor fit checks, the enclosure is rated for devices up to 68 mm wide, 83 mm high, and 65 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 protection for locations that see spray and dust, such as cockpits, flybridges, and utility areas\u003c\/li\u003e\n\u003cli\u003eSurface-mount box for adding a 2-module station without cutting a recessed mounting cavity\u003c\/li\u003e\n\u003cli\u003eCompatible with 2 Idea modules or 2 8000 special modules\u003c\/li\u003e\n\u003cli\u003eIncludes two 08491 adaptors to accept 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey housing for a clean, consistent look with common electrical enclosures on board\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with insulating fill for use on insulated bulkheads and panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 enclosure in RAL 7035 grey\u003c\/li\u003e\n\u003cli\u003e2 x 08491 adaptors for 8000 standard modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount on a flat, solid surface with room to access the modules and wiring. In exposed spots, route wiring with a drip loop before it enters the box and seal cable entries with appropriate glands or boots so the IP55 protection is maintained.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is for Vimar Idea modular devices and the 8000 special module footprint. Confirm your devices are 2-module width and stay within the maximum device size so terminals and cable bends do not interfere with closing the enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is commonly used for protected switch points for deck lighting, pumps, and small accessories near companionways, helm stations, wet lockers, and equipment spaces. It suits boats where electrical gear is exposed to occasional spray or washdown, rather than continuous immersion.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550277894390,"sku":"APL705215","price":11.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353487_apl705215_jpeg.jpg?v=1787789532"},{"product_id":"apl691756","title":"Mastervolt - PowerCombi Remote Control Panel","description":"\u003ch4\u003eSeamless Control with the PowerCombi Remote Control Panel\u003c\/h4\u003e\n\u003cp\u003eIntroducing the PowerCombi Remote Control Panel, a sophisticated and user-friendly interface designed to optimize the operation of your PowerCombi inverter\/charger system. This remote panel simplifies the process of monitoring and controlling your inverter\/charger, providing instant access to settings and system information right at your fingertips. With its intuitive LCD display, you can effortlessly configure the inverter\/charger settings and stay informed about the system status and any fault messages, ensuring your marine or mobile power system operates smoothly and efficiently.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntuitive LCD display for easy monitoring and control of PowerCombi systems.\u003c\/li\u003e\n\u003cli\u003eUser-friendly interface for straightforward operation and configuration.\u003c\/li\u003e\n\u003cli\u003eComprehensive fault message display, allowing for quick diagnostics and resolutions.\u003c\/li\u003e\n\u003cli\u003eCompact and elegant design, fitting seamlessly into any control panel or dashboard.\u003c\/li\u003e\n\u003cli\u003eDirect connection to PowerCombi inverter\/charger for real-time system status updates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Excellence for Enhanced System Management\u003c\/h4\u003e\n\u003cp\u003eThe PowerCombi Remote Control Panel stands out with its ability to provide precise control over your inverter\/charger system. Its LCD display not only offers clear visibility of operational parameters but also ensures that you are immediately notified of any system irregularities, enabling prompt action to maintain optimal performance.\u003c\/p\u003e\n\u003ch4\u003eAdvanced Monitoring for Reliable Performance\u003c\/h4\u003e\n\u003cp\u003eEnsure the reliability and efficiency of your power system with the PowerCombi Remote Control Panel. Its advanced monitoring capabilities allow for the proactive management of your inverter\/charger, ensuring that your marine adventures or mobile applications are powered without interruption.\u003c\/p\u003e\n\u003cp\u003eExperience the convenience and confidence that comes with having full control over your power system. The PowerCombi Remote Control Panel is an essential accessory for anyone looking to enhance the usability and monitoring of their Mastervolt PowerCombi inverter\/charger.\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":51550278058230,"sku":"APL691756","price":156.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0706809_apl691756.jpg?v=1787789548"},{"product_id":"apl557363","title":"Vimar Eikon 20021 Interchangeable 1-Module Rocker Button Cover, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20021 is a 1-module interchangeable rocker button cover that can be lighted, used to finish a matching Eikon switch or push-button control on board.\u003c\/p\u003e\u003cp\u003eIt mounts with a clamp fit and includes a monitoring window\/light outlet, so a status light or locator light can show through when the underlying mechanism supports it. The IP40 rating makes it a good fit for protected interior panels rather than areas exposed to spray, washdowns, or deck weather.\u003c\/p\u003e\u003cp\u003eIn grey, the color matches RAL 7024 (similar) with a matt, untreated surface. The button is made from halogen-free thermoplastic, which suits typical cabin and helm installations where vibration and daily use are common.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module rocker button cover for the Vimar Eikon system\u003c\/li\u003e\n\u003cli\u003eLightable format with monitoring window\/light outlet for visible indication\u003c\/li\u003e\n\u003cli\u003eClamp mounting for a secure fit on the compatible mechanism\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for interior switch panels and dry technical spaces\u003c\/li\u003e\n\u003cli\u003eOffered in multiple colors and symbol markings to match the panel layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis button cover is available in three color finishes: grey, silver, and white.\u003c\/p\u003e\u003cp\u003eSymbol options include Standard (no marking), Bell, Light, O\/I, and Key. The symbol choice is used to match the function on a multi-switch panel, so circuits stay recognizable at a glance.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a control element cover, not a complete switch by itself. It is intended to be paired with the compatible 1-module Eikon mechanism and the matching Eikon mounting frame and cover plate system already installed on the boat.\u003c\/p\u003e\u003cp\u003eIf you are mixing finishes on the same panel, confirm the series is Eikon across frames and plates so module sizes and clip points line up correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is typically a front-fit clamp onto the mechanism after wiring is complete and power is isolated. Check that the rocker pivots freely and that the monitoring window aligns with any indicator or illumination point behind it.\u003c\/p\u003e\u003cp\u003eWhen used in a helm or cabin switch bank, place it where it stays out of direct spray and where routine cleaning will not force water into the mechanism area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of rocker cover is commonly used for cabin lighting, courtesy lights, freshwater pump control, electronics master switching, and other circuits that benefit from clear panel labeling. Symbol versions are especially helpful on boats with multiple identical modules in a tight switch row.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where the boat already uses Vimar Eikon modules and you want consistent markings and finishes across a new or expanded switch panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild cleaner. Avoid solvent-based products that can haze plastic surfaces. If the area sees frequent condensation, keep the panel ventilated and address any moisture at the mechanism level rather than relying on the button cover for sealing.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Standard","offer_id":51550278156534,"sku":"APL557363-V6","price":4.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Key","offer_id":51550278189302,"sku":"APL557363-V98","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I","offer_id":51550278222070,"sku":"APL557363-V32","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ O\/I","offer_id":51550278254838,"sku":"APL557363-V47","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Grey \/ O\/I","offer_id":51550278287606,"sku":"APL557363-V1","price":4.05,"currency_code":"USD","in_stock":true},{"title":"White \/ Key","offer_id":51550278320374,"sku":"APL557363-V30","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Key","offer_id":51550278353142,"sku":"APL557363-V05","price":4.85,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Light","offer_id":51550278385910,"sku":"APL557363-V0","price":5.04,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Standard","offer_id":51550278418678,"sku":"APL557363-V9","price":3.9,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Bell","offer_id":51550278451446,"sku":"APL557363-V4","price":4.21,"currency_code":"USD","in_stock":false},{"title":"White \/ Standard","offer_id":51550278484214,"sku":"APL557363-V3","price":3.9,"currency_code":"USD","in_stock":true},{"title":"White \/ Light","offer_id":51550278516982,"sku":"APL557363-V2","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Light","offer_id":51550278549750,"sku":"APL557363-V7","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Bell","offer_id":51550278582518,"sku":"APL557363-V5","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ Bell","offer_id":51550278615286,"sku":"APL557363-V8","price":4.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363282_apl557363_jpeg.jpg?v=1787789539"},{"product_id":"apl619452","title":"Vimar Idea 17086 1-Module Mounting Frame, For 60 mm or 56x56 mm Flush Boxes, For 09971 Surface Boxes, Smooth Front, Without Screws, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 17086 is a 1-module mounting frame with a smooth front and no visible fixing screws, made for round or square flush mounting boxes with 60 mm fixing centres and 56x56 mm boxes, as well as 09971 surface mounting boxes.\u003c\/p\u003e\u003cp\u003eOn board it is used to seat a single Vimar IDEA modular device cleanly in a bulkhead or panel, keeping the front tidy around lighting and accessory controls in cabins, heads, and helm stations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module frame for Vimar IDEA modular wiring devices\u003c\/li\u003e\n\u003cli\u003eSmooth front with no visible fixing screws once the cover plate is fitted\u003c\/li\u003e\n\u003cli\u003eFits round or square flush boxes with 60 mm fixing centres and 56x56 mm flush boxes\u003c\/li\u003e\n\u003cli\u003eCompatible with 09971 surface mounting boxes\u003c\/li\u003e\n\u003cli\u003eThermoplastic body suited to interior marine panels and trim\u003c\/li\u003e\n\u003cli\u003eModule inserts mount from the back side and can be oriented horizontally or vertically\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis mounting frame is offered in two colour configurations to match different IDEA finishes.\u003c\/p\u003e\u003cp\u003eColour changes between variants; the 1-module format and box compatibility stay the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM17086.B: Color Ivory. A light finish that blends with white or light trim around switches and outlets.\u003c\/li\u003e\n\u003cli\u003eVM17086: Color Gray. A neutral finish that matches gray plates and tends to hide handling marks in high-touch areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConfirm your box type and fixing centres before cutting or drilling. This frame is intended for 60 mm centre spacing and also works with 56x56 mm flush boxes, plus the 09971 surface box. The frame fastens to the box, then the 1-module device is secured from the rear and finished with the matching cover plate.\u003c\/p\u003e\u003cp\u003eWhen installing on a boat, use a backing plate or a firm panel surface so the frame stays flat. That helps the cover plate sit evenly and avoids movement when the panel flexes underway.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush-mount frame, not a floor box accessory and not a DIN-rail mounting part. It is intended for the Vimar IDEA modular system, so match the frame, device, and cover plate within the same family and in a 1-module format.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550278811894,"sku":"APL619452-V6","price":3.55,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550278844662,"sku":"APL619452-V5","price":3.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364893_apl619452_jpeg.jpg?v=1787789575"},{"product_id":"apl569628","title":"Blue Sea Systems Traditional Metal AC Main Circuit Breaker Panel, 120V AC, White Toggle Breakers, Non-Metered","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Traditional Metal AC Main Breaker Panel is a non-metered 120V AC distribution panel range for boats that need a main AC disconnect with clearly organized branch circuit positions. It uses the Traditional Metal panel format with white toggle breakers, backlit circuit label positions, green ON indicator LEDs, and a red reverse-polarity indicator LED for quick visual checks at the panel.\u003c\/p\u003e\u003cp\u003eThis range covers compact and larger AC layouts, from 1 to 22 positions, with panel face sizes from 5.25in x 3.75in up to 14.75in x 7.50in. The hot, neutral, and safety ground buses are installed and pre-wired, which helps keep the AC side of a refit or panel replacement cleaner and easier to plan.\u003c\/p\u003e\u003cp\u003eThese panels are a practical fit for 120V AC onboard systems where metering is not required at the panel itself, or where voltage and current monitoring are handled elsewhere in the vessel. They are not for 12V or 24V DC distribution.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120V AC non-metered panel range for onboard AC main and branch circuit distribution.\u003c\/li\u003e\n\u003cli\u003e30A double-pole white toggle AC main breaker format across the range.\u003c\/li\u003e\n\u003cli\u003eHot, neutral, and safety ground buses are installed and pre-wired for a cleaner installation path.\u003c\/li\u003e\n\u003cli\u003eRed reverse-polarity indicator LED gives a visible warning at the panel when incoming AC polarity is incorrect.\u003c\/li\u003e\n\u003cli\u003eGreen ON indicator LEDs are installed in circuit positions for quick status checks.\u003c\/li\u003e\n\u003cli\u003eBacklit circuit label positions are included on standard panels, with no separate backlight kit required.\u003c\/li\u003e\n\u003cli\u003eMultiple panel sizes and position counts let the panel match both available dash space and the number of AC circuits on board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in several Traditional Metal AC Main configurations for different panel spaces and AC circuit counts.\u003c\/p\u003e\u003cp\u003eThe confirmed differences between variants are the number of positions and the panel face size. The range keeps the same 120V AC, non-metered AC main panel concept with white toggle breaker styling, pre-wired AC buses, backlit label positions, ON indicator LEDs, and reverse-polarity indication.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8027: 6 positions, 5.25in wide x 7.50in high. This vertical layout works well where the mounting area is narrow but has enough height for a medium AC circuit count.\u003c\/li\u003e\n\u003cli\u003e8464: 14 positions, 10.50in wide x 7.50in high. This wider layout gives more branch circuit capacity while keeping the same 7.50in panel height.\u003c\/li\u003e\n\u003cli\u003e8465: 22 positions, 14.75in wide x 7.50in high. This is the largest layout in this group and fits more complete AC distribution arrangements on larger refits.\u003c\/li\u003e\n\u003cli\u003e8029: 1 position, 5.25in wide x 3.75in high. This compact layout is useful where only a small AC main panel footprint is available.\u003c\/li\u003e\n\u003cli\u003e8099: 4 positions, 10.50in wide x 3.75in high. This low-height layout spreads the positions across a wider face, which can help when vertical dash or bulkhead space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMatch the panel to the vessel’s 120V AC wiring plan before cutting or replacing an existing panel. The position count should cover the required AC circuits with room for the way the boat is actually used, whether that includes cabin outlets, battery charging, galley equipment, water heating, air conditioning, or other onboard AC loads.\u003c\/p\u003e\u003cp\u003eThe pre-wired buses reduce some of the layout work, but final AC wiring still needs correct conductor sizing, breaker selection, strain relief, labeling, and safe routing behind the panel. AC panel work should be done with the system de-energized and checked by a qualified marine electrician when there is any uncertainty.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel range is for 120V AC marine electrical systems. It should not be used as a DC breaker panel, and it should be matched to the vessel’s AC source arrangement, existing protection scheme, and available mounting space.\u003c\/p\u003e\u003cp\u003eBecause the panels are non-metered, they keep the front face simpler and are a good match when a separate meter, monitoring system, or existing AC source equipment already handles voltage or current display. Before ordering, compare the variant face dimensions with the available cutout area, surrounding trim, wire clearance behind the panel, and the space needed to operate the white toggle breakers comfortably.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"14 \/ 10.50in x 7.50in","offer_id":51550278910198,"sku":"APL569628-V13","price":916.99,"currency_code":"USD","in_stock":false},{"title":"6 \/ 5.25in x 7.50in","offer_id":51550278942966,"sku":"APL569628-V95","price":449.99,"currency_code":"USD","in_stock":true},{"title":"22 \/ 14.75in x 7.50in","offer_id":51550278975734,"sku":"APL569628-V19","price":1268.99,"currency_code":"USD","in_stock":false},{"title":"4 \/ 10.50in x 3.75in","offer_id":51550279008502,"sku":"APL569628-V81","price":508.99,"currency_code":"USD","in_stock":true},{"title":"1 \/ 5.25in x 3.75in","offer_id":51550279041270,"sku":"APL569628-V02","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325050_apl569628.webp?v=1787789576"},{"product_id":"apl305610","title":"Vimar Flush Mounting Box, 60 mm, For Masonry Walls, Halogen-Free Plastic, 50 mm Inner Depth, 20\/25 mm Conduit, 5 Inlets","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar flush mounting box ø 60mm is a round flush-mounted box for masonry-wall installations, with a 60 mm diameter, 50 mm inner depth, five inlets, and rear entry for 20\/25 mm conduit. It is made from halogen-free plastic and uses break-out openings for pipe entry.\u003c\/p\u003e\u003cp\u003eIt works as the rough-in box behind flush-mounted electrical devices where space, conduit routing, and box depth need to be checked before closing the wall. The housing is couplable for side-by-side layouts, carries an IP00 rating, and accepts anti-mortar and decorative covers when those accessories are part of the installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 mm round body with 50 mm inner depth for flush mounting in masonry walls\u003c\/li\u003e\n\u003cli\u003eFive inlets plus rear entry, with break-out openings for 20\/25 mm conduit\u003c\/li\u003e\n\u003cli\u003eCouplable housing for aligned multi-box layouts\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with IP00 protection for enclosed installations behind the finished device\u003c\/li\u003e\n\u003cli\u003eAvailable in two versions that change color and glow-wire rating: light blue at 650 °C and black at 960 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that share the same round 60 mm format and flush-mounted construction.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the box color and glow-wire rating. Diameter, inner depth, five-inlet layout, rear entry, 20\/25 mm conduit compatibility, couplable body, halogen-free plastic construction, and IP00 protection remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMV71001: light blue version with a 650 °C glow-wire rating. It keeps the same box size and conduit entry format as the other version.\u003c\/li\u003e\n\u003cli\u003eVMV71001.AU: black version with a 960 °C glow-wire rating. It uses the same flush-mounted form factor and accessory compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis box is made for flush mounting in masonry walls, so the wall build and available depth should be checked before ordering. It is not a hollow-wall box and it is not a surface-mount enclosure.\u003c\/p\u003e\u003cp\u003eFor boat projects, that usually limits it to protected interior work where the structure accepts this style of flush box and the final device or trim covers the open front. Because the housing is IP00, it should stay out of exposed spray areas and any location that depends on the box itself for water protection.\u003c\/p\u003e\u003ch6\u003eAccessories and finishing\u003c\/h6\u003e\u003cp\u003eAnti-mortar covers and decorative covers are available for this box. That is useful when rough-in happens before final trim-out or when the finished installation needs a matching cover once wiring is complete.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box suits interior electrical refit work where a 60 mm flush box is already part of the plan and where conduit entry from the rear or side knockouts matters. It is a practical match for installers who need to keep the same opening size across the range while selecting between two glow-wire ratings.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Glow Wire 650\/Light Blue","offer_id":51550281367798,"sku":"APL305610-2","price":0.65,"currency_code":"USD","in_stock":true},{"title":"Glow Wire 960\/Black","offer_id":51550281400566,"sku":"APL305610-0","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827974_apl305610.jpg?v=1787789660"},{"product_id":"apl990574","title":"BEP Marine - 701MD Motorized Mini Battery Switch - 275 Amp Continuous","description":"\u003ch4\u003eEfficient and Reliable Battery Switching for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe BEP Marine 701MD Mini Battery Switch is designed for high-performance marine electrical systems, ensuring safe and efficient battery management. This motorized switch allows remote operation, reducing cable length requirements and optimizing power distribution. By placing the switch close to the battery, users can significantly cut down on installation labor and copper cable costs. Ideal for remote isolation of bow thrusters and starter motors, this switch enhances convenience and reliability.\u003c\/p\u003e\u003ch4\u003eKey Features for Enhanced Performance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Operation\u003c\/strong\u003e: Easily control the battery switch from a distance for added convenience and safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Installation\u003c\/strong\u003e: Mounts close to the battery, reducing the need for long, expensive copper cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Override\u003c\/strong\u003e: Meets CE requirements with a manual override option for emergency situations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Status Indicator\u003c\/strong\u003e: Provides clear status identification for remote control operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal Power Draw\u003c\/strong\u003e: Efficient energy consumption, drawing only 12mA when off and 15mA when on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Capacity Performance\u003c\/strong\u003e: Maintains the same specifications and mounting options as other BEP Marine battery switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating\u003c\/strong\u003e: 275 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating\u003c\/strong\u003e: 455 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Current Rating\u003c\/strong\u003e: 1250 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Compatibility\u003c\/strong\u003e: 9.5V - 32V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctionality\u003c\/strong\u003e: On\/Off operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size\u003c\/strong\u003e: 2 x (10mm \/ 3\/8\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 2.7\" x 2.7\" x 4\"\u003c\/li\u003e\u003c\/ul\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550288478454,"sku":"APL990574","price":283.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834232_apl990574.jpg?v=1787789844"},{"product_id":"apl853774","title":"Vimar Incandescent Lamp, 24V, 3W, 7x31mm, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07055 is a 24 V, 3 W incandescent festoon lamp in the 7 mm by 31 mm format for small onboard illumination points and indicator modules that use this lamp size.\u003c\/p\u003e\u003cp\u003eIt produces white light and fits holders that accept a 31 mm festoon with a lamp body around 8 mm by 15 mm, which matters when the lamp sits behind a tight lens or switch window. This is a straightforward replacement part for keeping compatible controls and small fixtures readable on 24 V DC systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 V, 3 W incandescent lamp for 24 V DC circuits\u003c\/li\u003e\n\u003cli\u003eFestoon size: 7 mm diameter and 31 mm length\u003c\/li\u003e\n\u003cli\u003eLamp body section around 8 mm by 15 mm for clearance behind lenses and caps\u003c\/li\u003e\n\u003cli\u003eWhite light output for indicator windows and small task points\u003c\/li\u003e\n\u003cli\u003eIncandescent lamp works on DC without polarity sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the lamp type and size to what is already installed. Festoon holders vary by length, and a few millimeters can decide whether the end contacts seat properly and whether the cover closes without pressure on the glass.\u003c\/p\u003e\u003cp\u003eConfirm the holder supports the 31 mm festoon length and that the lamp body clears any diffuser, lens, or switch window. If the old lamp shows heat marks on the lens, check there is enough clearance and ventilation before fitting the new one.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis lamp is for nominal 24 V systems. On 12 V it will glow weakly; on higher voltage it will have a short life and can overheat the fixture.\u003c\/p\u003e\u003cp\u003eAt 24 V and 3 W, current draw is about 0.13 A. Make sure the circuit and contacts are clean and snug so vibration does not cause flicker.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTurn off power at the panel and let the fixture cool before handling the lamp. Remove the cover or module window as required, then lift the festoon out of its spring contacts and seat the new lamp evenly so both ends are fully engaged.\u003c\/p\u003e\u003cp\u003eAfter reinstalling the lens or cover, power the circuit back up and check for steady light. If it flickers underway, the holder contacts usually need cleaning or a slight re-tensioning.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lamp makes sense on boats and yachts that run 24 V DC and use small indicator lights in switch panels, control stations, or compact interior fixtures where the 7 x 31 mm festoon format is used. It is also a good match when you want the same look and output as the original incandescent lamp rather than switching the fixture to LED.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSalt air and humidity can leave a film on contacts over time. If a lamp change does not restore steady operation, clean the end contacts and the holder springs, and inspect for heat-darkened lenses that can reduce visibility.\u003c\/p\u003e\u003cp\u003eKeeping a spare on board helps for panel indicators and small utility lights, especially on offshore runs where a quick swap is easier than troubleshooting a dim or intermittent lamp at night.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550293852406,"sku":"APL853774","price":6.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826816_apl-npj-xsa-fdx.jpg?v=1787789999"},{"product_id":"apl964099","title":"BEP Millennium Series DC Circuit Breaker Panel w\/Digital Meters, 28SP DC12V M28-DCSM","description":"\u003cb\u003eMillennium Series DC Circuit Breaker Panel with Digital Meters, 28SP DC12V\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eBEP Marine uses the highest quality materials in its range of Control\u003cbr\u003ePanels, from the marine grade aluminium base plates to the Airpax magnetic\u003cbr\u003ehydraulic circuit breakers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMarine Grade powder coated aluminium\u003c\/li\u003e\n\u003cli\u003eAirpax circuit breaker\u003c\/li\u003e\n\u003cli\u003eStylish Contour Design fascia\u003c\/li\u003e\n\u003cli\u003eGreen LED backlit labels\u003c\/li\u003e\n\u003cli\u003eRed LED indicates systems on\u003c\/li\u003e\n\u003cli\u003eMimic Panel for quick reference of systems in operation\u003c\/li\u003e\n\u003cli\u003ePanels meet ABYC standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eTotal Positions: 28 Loads\u003cbr\u003eCircuit Breakers: 8X 5A, 8X 10A, 8X 15A, 2X 20A, 2X 30A\u003cbr\u003eNominal Voltage: 12V\u003cbr\u003eMaximum Amperage: 160A per bus\u003cbr\u003eDimensions: 14.6\" X 9.75\" X 2.5\"\u003cbr\u003eNeg Bus: 24 Way\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550297850102,"sku":"APL964099","price":2477.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1102072_apl964099jpg.jpg?v=1787790208"},{"product_id":"apl229720","title":"Cole Hersee - Push Pull Switch SPST Off-On","description":"\u003ch4\u003eSeamless Switching at Sea: Push Pull Switches for Marine Excellence\u003c\/h4\u003e\n\u003cp\u003eDiscover the pinnacle of nautical control with our Push Pull Switch collection, specifically designed to meet the rigorous demands of marine environments. Whether you're navigating the open ocean or docking at a serene marina, these switches offer unparalleled reliability and ease. Crafted for seamless integration into your vessel's electrical system, our Push Pull Switches ensure a smooth sailing experience, enhancing both safety and functionality aboard.\u003c\/p\u003e\n\u003ch4\u003eEffortless Operation with Durable Design\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSimple push-pull mechanism for easy on-off control\u003c\/li\u003e\n\u003cli\u003eSPST (Single Pole Single Throw) configuration, ensuring straightforward electrical connectivity\u003c\/li\u003e\n\u003cli\u003eRobust brass construction for long-lasting durability against harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eVariants with PVC-coated brass cases for additional protection\u003c\/li\u003e\n\u003cli\u003eChrome brass actuator knob for a touch of elegance and extra corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFlexible voltage compatibility ranging from 6 to 36VDC, accommodating a wide array of marine electrical systems\u003c\/li\u003e\n\u003cli\u003eHigh current rating of 10A at 12VDC, capable of handling significant loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdaptable Dimensions for Every Deck\u003c\/h4\u003e\n\u003cp\u003eWith a standardized size of 3\/8\"-32 and a length of 1-1\/4\", our Push Pull Switches are designed to fit effortlessly into your vessel's control panel, ensuring a sleek and unobtrusive installation.\u003c\/p\u003e\n\u003ch4\u003eVibrant Varieties for Vessel Versatility\u003c\/h4\u003e\n\u003cp\u003eOur collection features several variations to cater to diverse maritime needs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Screw Terminal\u003c\/strong\u003e: Ideal for simple installations, featuring a sturdy brass case for straightforward operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Wire\u003c\/strong\u003e: Equipped with PVC-coated brass for enhanced environmental protection, suitable for vessels requiring extra durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Screw Terminal\u003c\/strong\u003e: Offers an upgraded configuration for more complex systems, including a chrome brass knob and three screw terminals for secure connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach variation is meticulously designed to provide reliable performance in the demanding marine setting, ensuring that you can focus on the journey ahead with confidence.\u003c\/p\u003e\n\u003ch4\u003eChart Your Course with Confidence\u003c\/h4\u003e\n\u003cp\u003eEmbrace the horizon with our Push Pull Switches, where durability meets functionality. Tailored for the sea, these switches are your steadfast companions on every maritime adventure, ensuring a seamless and secure connection to your vessel's essentials. Choose the variant that best suits your nautical needs and sail towards excellence with unwavering control.\u003c\/p\u003e","brand":"Cole Hersee","offers":[{"title":"2 Screw","offer_id":51550298210550,"sku":"APL229720-V9","price":25.99,"currency_code":"USD","in_stock":false},{"title":"3 Screw","offer_id":51550298243318,"sku":"APL229720-V7","price":28.99,"currency_code":"USD","in_stock":false},{"title":"2 Wire","offer_id":51550298276086,"sku":"APL229720-V1","price":30.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0705283_apl229720.jpg?v=1787790220"},{"product_id":"apl939346","title":"Pacer Actuator - 'NAVIGATION' f\/V Series Contura Switches - Black - Laser Etched (Top\/Bottom Light) EV2LE-NAV","description":"\u003cp\u003e\u003cstrong\u003eActuator - 'NAVIGATION' for V Series Contura Switches - Black - Laser Etched (Top\/Bottom Light)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLaser-etched switch covers are the highest level of quality that you can achieve. They offer a clean, crisp look that has to be seen to be believed. With laser precision, our switch covers offer a flawless finish you simply cannot match with other methods. Many of the etched switch covers we offer are available in either single or dual-light formats. This means that users can get the type you need to match the look they want. With laser-etched switch covers, users get a permanent marking solution that will not chip, peel, or fade over time. Pacer currently offers over 225 options of etched switch covers. Choosing the right etched switch cover is not an easy task. Contact a Pacer expert today with any questions that you may have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA permanent marking solution\u003c\/li\u003e\n\u003cli\u003eFits V Series Contura switches\u003c\/li\u003e\n\u003cli\u003eResistant to UV exposure\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eLow light visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of Bulbs: Two lenses\u003c\/li\u003e\n\u003cli\u003eEtched Symbol: NAVIGATION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Sold as an individual\u003c\/p\u003e","brand":"Pacer Group","offers":[{"title":"Default Title","offer_id":51550298374390,"sku":"APL939346","price":16.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1101262_apl939346jpg.jpg?v=1787790229"},{"product_id":"apl183768","title":"DS18 - Marine Grade Fuse Holder","description":"\u003ch4\u003eUnwavering Protection at Sea: DS18 Marine Grade Fuse Holders\u003c\/h4\u003e\n\u003cp\u003eEmbark on your nautical adventures with the confidence that your electrical system is safeguarded by DS18's latest innovation in marine grade fuse holders. Engineered to withstand the harshest marine conditions, these fuse holders provide an impenetrable shield against moisture, ensuring uninterrupted power and protection for your vessel. Designed for durability and performance, they are your first line of defense against the unpredictability of the open water.\u003c\/p\u003e\n\u003ch4\u003eSeal the Deal with Superior Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWater-tight construction prevents short circuits and corrosion, keeping your marine electronics safe.\u003c\/li\u003e\n\u003cli\u003eEach fuse holder includes allen keys, ferrules, and bolts for secure connections that resist the elements.\u003c\/li\u003e\n\u003cli\u003eChoose the perfect fuse from an assortment provided, tailored to your amp power requirements.\u003c\/li\u003e\n\u003cli\u003eConstructed from high-strength plastic, these fuse holders are built to last in any weather.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChoose Your Shield\u003c\/h4\u003e\n\u003cp\u003eDifferent vessels and setups require customized solutions. DS18 recognizes this need and offers fuse holders in both 8 GA and 4 GA variations, each designed with unique features to meet the specific demands of your marine audio system. Whether you need a broad range of fuses for versatile power requirements or specialized configurations for high-demand systems, DS18 has you covered.\u003c\/p\u003e\n\u003ch4\u003eSpecifications That Speak Volumes\u003c\/h4\u003e\n\u003cp\u003eDS18 fuse holders come equipped with all the essentials for a straightforward installation and long-term reliability. This includes a red silicone sheath for added protection and a variety of fuses (ATC for 8 GA and AFS for 4 GA models) to ensure your setup is optimized for performance. With included allen keys for easy maintenance and silver-plated bass accessories for enhanced conductivity, your marine audio system is in good hands.\u003c\/p\u003e\n\u003ch4\u003eDesigned to Endure\u003c\/h4\u003e\n\u003cp\u003eThe general dimensions of these fuse holders are crafted to fit seamlessly into your marine setup, ensuring a snug, secure fit that stands up to waves and weather. Both models include robust tubular terminals to accommodate a range of wiring setups, ensuring a connection that’s not only tight but also resistant to the corrosive marine environment.\u003c\/p\u003e\n\u003ch4\u003eNavigate with Confidence\u003c\/h4\u003e\n\u003cp\u003eWith DS18's Marine Grade Fuse Holders, you're not just installing a component; you're investing in peace of mind. Designed to perform when it matters most, these fuse holders are the silent guardians of your marine adventures. Choose the strength, reliability, and performance of DS18 and set sail with confidence, knowing that your vessel is protected by the best.\u003c\/p\u003e","brand":"DS18","offers":[{"title":"8 GA","offer_id":51550300537078,"sku":"APL183768-V5","price":14.95,"currency_code":"USD","in_stock":false},{"title":"4 GA","offer_id":51550300569846,"sku":"APL183768-V0","price":20.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0704589_apl183768.jpg?v=1787790289"},{"product_id":"apl106819","title":"Blue Sea Systems 8200 Series Digital Meter, 14.29 mm Display, Splashproof Front","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Digital Meter is a panel-mounted meter range for monitoring important AC or DC electrical values on boats, including voltage, current, frequency, and power depending on the selected configuration. The range covers DC input versions from 7-60V DC or 8-32V DC, and AC input versions from 80-249V AC, so the correct choice depends on the circuit being monitored.\u003c\/p\u003e\u003cp\u003eThese meters suit helm stations, electrical panels, battery monitoring points, inverter or shore power panels, and other locations where a clear digital readout helps the operator keep an eye on system condition. Several versions include three display brightness levels, a splashproof front, and sleep mode for reduced power use when the display is not needed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDigital display options for voltage, current, frequency, and multi-function AC or DC monitoring, depending on the selected meter.\u003c\/li\u003e\n\u003cli\u003eDC voltage versions monitor 0 to 60V DC, covering common 12, 24, 32, 36, and 42V DC boat systems.\u003c\/li\u003e\n\u003cli\u003eAC voltage versions monitor 80 to 270V AC, useful for shore power, generator, and onboard AC distribution panels.\u003c\/li\u003e\n\u003cli\u003eCurrent-reading DC configurations measure up to -500 to +500A and use a 500A shunt for high-current monitoring.\u003c\/li\u003e\n\u003cli\u003eCurrent-reading AC configurations measure 0 to 150A and use a current transformer for AC load monitoring.\u003c\/li\u003e\n\u003cli\u003eSelected alarm versions add audio and visual alerts for high and low voltage, and the AC multi-function version also includes high current alarm capability.\u003c\/li\u003e\n\u003cli\u003eThree display brightness levels help the readout stay usable in changing cockpit, cabin, and panel lighting conditions.\u003c\/li\u003e\n\u003cli\u003eSplashproof front helps protect the meter face in exposed or semi-exposed marine panel locations.\u003c\/li\u003e\n\u003cli\u003eSingle-meter format works with compatible Blue Sea Systems mounting panels and blank meter panels for clean panel integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Digital Meter range varies by measured function and input voltage. Options include DC voltage, DC current, AC voltage, AC current, AC frequency, and multi-function configurations that combine several readings in one display.\u003c\/p\u003e\u003cp\u003eThe DC models cover low-voltage boat electrical systems, while the AC models are used on higher-voltage AC circuits such as shore power or generator-fed panels. Alarm capability is included only on specific versions, so it should be matched to the level of monitoring required for the installation.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor DC installations, the voltage-only versions are used to watch battery banks or DC distribution voltage, while the current and multi-function versions are better suited to charge and load monitoring. DC current meters that operate through a shunt are normally installed on the negative side of the circuit; positive-side current measurement requires the correct shunt shifter accessory.\u003c\/p\u003e\u003cp\u003eFor AC installations, the voltage, current, frequency, and multi-function options help monitor shore power, generator output, and AC distribution behavior. The AC multi-function configuration combines current, voltage, frequency, and power readings, which can reduce panel clutter when several AC values need to be checked from one location.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThese meters are a practical fit for electrical panels where quick visual confirmation matters, such as a helm electrical station, nav station, machinery space panel, or main AC\/DC distribution board. The display brightness settings are useful on boats that move between daylight operation, night running, and dim cabin lighting.\u003c\/p\u003e\u003cp\u003eBefore ordering, match the meter to the circuit type, input voltage range, and value being monitored. A DC meter should not be substituted for an AC circuit, and a voltage meter will not provide current, frequency, or power readings unless those functions are part of the selected configuration.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Voltage \/ 7-60V DC","offer_id":51550305878262,"sku":"APL106819-V1","price":261.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ 8-32V DC","offer_id":51550305911030,"sku":"APL106819-V2","price":310.99,"currency_code":"USD","in_stock":false},{"title":"Voltage with Alarm \/ 7-60V DC","offer_id":51550305943798,"sku":"APL106819-V8","price":294.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ Voltage \/ 7-60V DC","offer_id":51550305976566,"sku":"APL106819-V7","price":400.99,"currency_code":"USD","in_stock":true},{"title":"Frequency \/ 80-249V AC","offer_id":51550306009334,"sku":"APL106819-V5","price":310.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ Frequency \/ Power \/ Voltage \/ 80-249V AC","offer_id":51550306042102,"sku":"APL106819-V6","price":440.99,"currency_code":"USD","in_stock":true},{"title":"Current \/ 80-249V AC","offer_id":51550306074870,"sku":"APL106819-V4","price":378.99,"currency_code":"USD","in_stock":true},{"title":"Voltage \/ 80-249V AC","offer_id":51550306107638,"sku":"APL106819-V3","price":310.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325144_apl106819.webp?v=1787790387"},{"product_id":"apl610607","title":"HEISE LED Lighting Systems - Wireless Remote Control \u0026 Relay Harness","description":"\u003ch4\u003eIlluminate Your Marine Experience: HEISE Wireless Remote Control \u0026amp; Relay Harness\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eHEISE Wireless Remote Control \u0026amp; Relay Harness\u003c\/strong\u003e, a groundbreaking solution from the forefront of the lighting industry. This wireless RF remote control and relay harness set the standard for remote-controlled illumination on any marine vessel. Designed for simplicity and ease of use, the HE-WRRK allows you to operate your HEISE LED light bar, driving light, or work light with just a touch of a button, eliminating the need to run wires inside your vehicle.\u003c\/p\u003e\n\u003ch4\u003eEffortless Operation and Installation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWireless control over your lighting with nine different flash options for versatile signaling and illumination.\u003c\/li\u003e\n\u003cli\u003e9-foot harness length provides ample reach for various installation needs.\u003c\/li\u003e\n\u003cli\u003eDirect 2-wire connection to the battery, bypassing the need for extensive wiring through the vehicle's interior.\u003c\/li\u003e\n\u003cli\u003eCompatible with any single HEISE LED light bar, driving light, or work light for tailored lighting setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eExpand Your Lighting System\u003c\/h4\u003e\n\u003cp\u003eLooking to add another light bar? The optional HE-EYHK (Y ADAPTER HARNESS KIT) is available for purchase, allowing you to connect two HEISE light bars, driving lights, or work lights, each 150 watts or less, to be controlled seamlessly with the HE-WRRK system.\u003c\/p\u003e\n\u003ch4\u003eWhat’s Included in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) Remote Control Receiver for receiving signals from the remote.\u003c\/li\u003e\n\u003cli\u003eOne (1) Battery Operated FOB for easy control from a distance.\u003c\/li\u003e\n\u003cli\u003eOne (1) Extension to ensure optimal placement.\u003c\/li\u003e\n\u003cli\u003eOne (1) Adapter for connecting additional lighting units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTransform your marine lighting experience with the \u003cstrong\u003eHEISE Wireless Remote Control \u0026amp; Relay Harness\u003c\/strong\u003e. Offering unmatched convenience and flexibility, this kit not only enhances the functionality of your lighting setup but also promotes a safer, more enjoyable marine adventure, all controlled from the palm of your hand.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":51550306435318,"sku":"APL610607","price":136.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0706278_apl610607.jpg?v=1787790416"},{"product_id":"apl600575","title":"Vimar Arke Axial 1-Way Switch, Single Pole, 16AX, 250V AC, Illuminable, 2-Module, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM19101 is a 1-pole, 1-way axial switch mechanism for the Arké modular system, rated 16 AX at 250 V~ and suitable for loads up to 200 W for self-ballasted lamps.\u003c\/p\u003e\u003cp\u003eIt takes up two modules in a Vimar Arké frame and sits behind your chosen cover plate to build consistent switch banks around the boat, such as at a cabin entry panel, at the helm console, or in a galley switch cluster. The axial rocker action feels familiar in use, and the button is replaceable, which helps when you are matching surrounding devices or updating legends during a refit.\u003c\/p\u003e\u003cp\u003eThis is a standard in-panel switching mechanism, so plan to mount it in a protected location inside an electrical panel or enclosure, away from direct spray and routine washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P\/1-way (on\/off) switching for controlling a single circuit from one location\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating; supports up to 200 W self-ballasted lamps\u003c\/li\u003e\n\u003cli\u003e2-module format to lay out multi-gang panels within the Vimar Arké modular system\u003c\/li\u003e\n\u003cli\u003eLightable mechanism so a compatible locator or indicator light can be added when needed\u003c\/li\u003e\n\u003cli\u003eReplaceable rocker button for cleaner labeling and a consistent look across the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis mechanism installs into a Vimar Arké mounting frame and back box like other Arké devices, then is finished with a matching cover plate. Wiring is the standard 1-way arrangement (line in and switched line out); verify conductor sizing and overcurrent protection match the circuit and your vessel’s electrical practices.\u003c\/p\u003e\u003cp\u003eWhen planning a multi-device panel, keep module count in mind: this switch uses two modules, so it pairs cleanly with other 2-module Arké components in shared cover plates.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eA good match for boats already built out with Vimar Arké, or for new interior panels where you want the same frames, devices, and cover plates throughout. If you need switching in an exposed exterior location, use an appropriate sealed switch or relocate the device to a protected panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon uses include interior lighting circuits, ventilation controls, and other on\/off loads where you want a tidy, flush panel. The illumination capability is handy on night passages when you want to find the switch quickly without turning on overhead lights.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550306697462,"sku":"APL600575","price":9.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281427_apl600575_jpeg.jpg?v=1787790431"},{"product_id":"apl255392","title":"Blue Sea Systems Triple Battery Bank Management Panel, 12\/24V DC, 32V Max","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Triple Battery Bank Management Panel is a battery switching and circuit protection panel for twin-engine boats using three battery banks. It combines two Dual Circuit Plus battery switches with push-button 24-hour circuit breakers and a 100A C-Series flat rocker circuit breaker, giving the helm or electrical panel a clearer way to manage start and house battery circuits.\u003c\/p\u003e\u003cp\u003eThis panel supports 12V and 24V DC systems with a maximum voltage of 32V DC. It is built around separate engine and house circuit control, emergency cross-connect between isolated battery banks, and protection for sensitive electronics from voltage sags and spikes that can happen during engine cranking.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for boats that need organized battery control without turning battery switching into a complicated routine. With the addition of two Automatic Charging Relays, charging can be automated across three battery banks while keeping the switching layout easy to understand.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBuilt for twin-engine battery systems with three battery banks when used with Automatic Charging Relays.\u003c\/li\u003e\n\u003cli\u003eSupports 12V and 24V DC installations, with a maximum voltage rating of 32V DC.\u003c\/li\u003e\n\u003cli\u003eSeparates engine and house circuits so house loads are less likely to drain the starting battery.\u003c\/li\u003e\n\u003cli\u003eAllows emergency cross-connect between isolated battery banks when backup starting power is needed.\u003c\/li\u003e\n\u003cli\u003eHelps protect onboard electronics from voltage spikes and sags during engine cranking.\u003c\/li\u003e\n\u003cli\u003eIncludes push-button thermal circuit breakers rated at 15A for 24-hour circuits.\u003c\/li\u003e\n\u003cli\u003eUses a 100A C-Series flat rocker circuit breaker for main circuit protection.\u003c\/li\u003e\n\u003cli\u003eIgnition protected for installation aboard gasoline-powered boats.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis panel is offered in two configurations, with the position count and panel layout changing between versions.\u003c\/p\u003e\u003cp\u003eBoth variants serve the same core battery-management role for twin-engine boats, but their current ratings, dimensions, included switch type, and number of 15A push-button breakers differ by configuration.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8689, Positions 7. This version uses two m-Series Mini Dual Circuit Plus battery switches and has a square 7.25 in by 7.25 in panel footprint, which suits installations where panel space is tighter.\u003c\/li\u003e\n\u003cli\u003e8693, Positions 11. This version uses two e-Series Dual Circuit Plus battery switches and has a wider 8.00 in by 10.50 in layout, giving more panel space for the additional 24-hour circuit breaker positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eElectrical ratings\u003c\/h6\u003e\u003cp\u003eThe 8689 variant is rated for 300A continuous current, 450A intermittent current for 5 minutes, 1000A cranking current for 10 seconds, and 650A cranking current for 1 minute.\u003c\/p\u003e\u003cp\u003eThe 8693 variant is rated for 350A continuous current, 525A intermittent current for 5 minutes, 1000A cranking current for 10 seconds, and 750A cranking current for 1 minute.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe panel is intended for main battery distribution on boats where start and house banks need to stay isolated during normal operation but remain available for emergency parallel connection. It belongs in a dry, serviceable electrical area where the switches, breakers, labels, and wiring can be reached for operation and inspection.\u003c\/p\u003e\u003cp\u003eBecause this is a high-current battery management component, cable sizing, overcurrent protection, terminal torque, and routing should match the vessel electrical plan. Installation should also account for engine-room vibration, battery cable strain relief, and access for resetting the push-button breakers.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis panel is a strong match for twin-engine cruising boats, fishing boats, and workboats that carry separate starting and house loads. It is especially useful where electronics, refrigeration, lighting, pumps, and other house circuits need to stay separated from the starting batteries during normal use.\u003c\/p\u003e\u003cp\u003eFor owners upgrading from scattered battery switches or unclear breaker layouts, this panel brings the main battery functions into one labeled control point, making everyday switching and emergency battery linking easier to manage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8689: two 6011 m-Series Mini Dual Circuit Plus battery switches, three 7056 15A push-button reset circuit breakers, and one 7549 100A C-Series single-pole flat rocker circuit breaker.\u003c\/li\u003e\n\u003cli\u003e8693: two 5511e e-Series Dual Circuit Plus battery switches, four 7056 15A push-button reset circuit breakers, and one 7549 100A C-Series single-pole flat rocker circuit breaker.\u003c\/li\u003e\n\u003cli\u003e4218 square format labels and 4140 24-hour round labels.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"7","offer_id":51550306861302,"sku":"APL255392-V7","price":605.99,"currency_code":"USD","in_stock":true},{"title":"11","offer_id":51550306894070,"sku":"APL255392-V6","price":616.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325896_apl255392.webp?v=1787790445"},{"product_id":"apl201896","title":"BEP SPST Chrome Plated Long Handle Toggle Switch - ON\/OFF 1002013","description":"\u003cp\u003e\u003cstrong\u003eSPST Chrome Plated Long Handle Toggle Switch - ON\/OFF\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, single throw toggle switch turns one circuit on and off. Common applications include any single circuit requiring an on-off style switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal voltage is 12V\/24V DC\u003c\/li\u003e\n\u003cli\u003eRated for 25A at 12V DC, 15A at 24V DC\u003c\/li\u003e\n\u003cli\u003eLong handle and two 1\/4\" balde terminals\u003c\/li\u003e\n\u003cli\u003eMounting stem 15\/32\" fits panels up to 1\/4\" thick\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number 55055\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550306926838,"sku":"APL201896","price":14.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1100135_apl201896jpg.jpg?v=1787790445"},{"product_id":"apl815207","title":"Vimar EIKON 2-Module Two-Rocker Push Buttons, Marine Version, Illuminated, 29V, IP40, Grey (RAL 7024)","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMR20523 is a 2-module EIKON-series control device with two rocker push buttons for domestic switching functions on board. It is rated for a nominal 29 V and supports integrated lighting for better visibility when the cabin lights are down.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt, untreated surface in grey (RAL 7024). With an IP40 rating, it is intended for protected interior locations where it will not be exposed to washdowns or direct spray. This mechanism is completed with interchangeable 1- or 2-module button covers, which are selected separately to match your labeling and layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module device with two rocker push buttons for EIKON modular installations\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 29 V\u003c\/li\u003e\n\u003cli\u003eIntegrated lighting support to help the control stay visible in low-light cabins\u003c\/li\u003e\n\u003cli\u003eFlush-mount installation with snap fastening for quick, clean panel integration\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with matt, untreated finish\u003c\/li\u003e\n\u003cli\u003eGrey color matched to RAL 7024\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for dry, sheltered onboard mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 44.8 mm wide, 49.0 mm high, 36.1 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis unit is meant to sit in a flush-mounted EIKON position and snap into place as part of the modular assembly. Plan for at least 36.1 mm of depth behind the mounting surface, plus room for wiring bend radius so the mechanism does not get stressed when the panel is secured.\u003c\/p\u003e\u003cp\u003eBecause the front is finished with separate interchangeable button covers, confirm you have the correct 1- or 2-module cover style for your panel layout before closing up the installation. The lighting feature is most useful at helm and cabin panels where the control needs to be located quickly at night.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eIt occupies two EIKON modules and is intended for builds that use the EIKON modular format and matching cover plates and button covers. When replacing an existing device, check that your current frame and aesthetics are EIKON-based and that your chosen covers match the function you want to label at the switch position.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of two-rocker control is commonly used at interior switch panels for cabin or courtesy lighting, zoned circuits, and other onboard switching tasks where a compact two-button layout keeps the panel tidy. It is a good match for boats standardizing on EIKON components in grey and keeping controls in protected areas rather than exposed cockpits or open decks.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the surface with a soft cloth and mild cleaner as needed, and avoid harsh solvents that can mark thermoplastic finishes. If a switch position feels loose over time, recheck the snap engagement and wiring strain relief so vibration does not work the mechanism free.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550307025142,"sku":"APL815207","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827165_apl-ohy-vvf-cfo.jpg?v=1787790454"},{"product_id":"apl538870","title":"Connect-Ease Multi 5 Fused Lead Accessory Connection System CE12VB5FK","description":"\u003cp\u003e\u003cstrong\u003eMulti 5 Fused Lead Accessory Connection System\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith more and more electronics being used in boating, this product allows up to five electronics or accessories to be connected to a single battery easily and correctly every time.\u003c\/p\u003e\n\u003cp\u003eWith fused connectors to safeguard expensive electronics, connect any marine equipment including Depth Finders, GPS Units, Radios, Lights, Pumps, Aerators, and more to one of the 14 AWG leads (10 AMP draw) to allow multiple electronics to be quickly and easily connected and disconnected to a battery. Remove expensive batteries for charging, storage, replacement, or theft protection in seconds.\u003c\/p\u003e\n\u003cp\u003eOnce the products are installed, no tools are needed for the removal, replacement, or storage of expensive marine batteries. Using the Connect-Ease series of products allows connecting any 12V marine battery with any equipment or device at any time, any place, easily and quickly, by simply snapping the connectors together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMulti 5 fused connection system to power your outdoor equipment easily and quickly\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play Connections\u003c\/li\u003e\n\u003cli\u003eLithium Compatible\u003c\/li\u003e\n\u003cli\u003eSuitable for use t-40° to 221° UL1977\u003c\/li\u003e\n\u003cli\u003e120 Amp Rating.\u003c\/li\u003e\n\u003cli\u003eUL1426 Tinned Marine Grade Wire\u003c\/li\u003e\n\u003cli\u003eOne-year Warranty\u003c\/li\u003e\n\u003cli\u003eSalt Water Approved\u003c\/li\u003e\n\u003cli\u003eMade In the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Connect-Ease","offers":[{"title":"Default Title","offer_id":51550318887158,"sku":"APL538870","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109366_apl538870jpg.jpg?v=1787790785"},{"product_id":"apl625028","title":"Lewmar - 52519 Toggle Switch - With Controller BUILT-IN","description":"\u003ch4\u003eConvenient Toggle Switch with Built-in Contactor\u003c\/h4\u003e\u003cp\u003eDesigned for seamless control, the Lewmar 52519 Toggle Switch with a built-in contactor offers an efficient and compact solution for smaller windlasses. Engineered for marine applications, this switch simplifies windlass operation, integrating both the toggle function and contactor into a single unit. This reduces installation complexity and enhances reliability, making it ideal for boat owners seeking a streamlined control system.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIntegrated toggle switch with built-in contactor\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for smaller windlasses\u003c\/li\u003e\n\u003cli\u003eCompact and efficient construction for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCombines switch and contactor for a simplified setup\u003c\/li\u003e\n\u003cli\u003eIdeal for marine environments and smaller windlass systems\u003c\/li\u003e\n\u003cli\u003eReduces wiring complexity and installation time\u003c\/li\u003e\n\u003cli\u003eDurable and reliable for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis toggle switch is an essential component for effortless windlass control, ensuring smooth operation in a marine setting.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":51550324687094,"sku":"APL625028","price":167.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0835056_apl625028.jpg?v=1787790921"},{"product_id":"apl237895","title":"Blue Sea Systems AC Analog Voltmeter, 2.75 in Face, Backlit Face","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Blue Sea Systems AC analog voltmeter is a panel-mounted meter for monitoring AC voltage on a boat, with two available ranges: 0-150V AC and 0-250V AC. It uses a 2.75 in face and a dial marked in 5V increments, so the reading is easy to check at the electrical panel without scrolling through a digital display.\u003c\/p\u003e\u003cp\u003eThe meter connects with a simple 2-wire connection to AC hot and neutral, and the meter sensing and operating power come from that same connection. Backlighting helps the scale stay readable at night or in a dim cabin, helm, or electrical locker.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for AC distribution panels where the crew wants a quick visual check of shore power, generator output, or inverter-fed AC voltage before and during use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAnalog AC voltmeter range options for 0-150V AC or 0-250V AC systems.\u003c\/li\u003e\n\u003cli\u003e2.75 in face size for standard panel layouts where a full-size analog meter is preferred.\u003c\/li\u003e\n\u003cli\u003eDial marked in 5V increments to make voltage changes easier to see at a glance.\u003c\/li\u003e\n\u003cli\u003eSimple 2-wire connection to AC hot and neutral for the meter circuit.\u003c\/li\u003e\n\u003cli\u003eMeter senses voltage and powers itself from the same AC connection.\u003c\/li\u003e\n\u003cli\u003eBacklit face for better visibility in low-light panel locations.\u003c\/li\u003e\n\u003cli\u003eBacklight wiring supports 12V or 24V DC panel lighting circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis AC analog voltmeter is offered in two voltage ranges for different AC panel applications.\u003c\/p\u003e\u003cp\u003eThe voltage scale is the main difference between the variants. Both versions use the same 2.75 in face size, 5V dial increments, 2-wire AC hot and neutral connection, self-powered meter operation from the measured AC circuit, and backlit meter face.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e9353: Voltage 0-150V. This scale suits AC panels where the monitored voltage stays within a 150V AC range, such as common 120V shore power, generator, or inverter circuits.\u003c\/li\u003e\n\u003cli\u003e9354: Voltage 0-250V. This wider scale covers AC systems where the panel needs to monitor voltage up to 250V AC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe meter circuit connects to the AC hot and neutral lines being measured, so it can read the circuit directly while drawing its own operating power from that connection. The backlight is wired separately to a DC lighting source: red and yellow are used for 12V backlighting, while orange and yellow are used for 24V backlighting, with yellow connected to negative.\u003c\/p\u003e\u003cp\u003eBecause this meter is installed on an AC electrical panel, wiring should match the vessel’s AC distribution layout and be handled with proper isolation, overcurrent protection, and safe working practices for marine AC systems.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis meter is useful at the main AC panel, a shore power panel, a generator panel, or an inverter output panel where a fast visual voltage check matters. It gives the operator a steady reference before energizing AC loads and makes it easier to spot low or high voltage conditions while connected at the dock or running onboard AC power.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"0-250V","offer_id":51550329471222,"sku":"APL237895-V6","price":55.99,"currency_code":"USD","in_stock":true},{"title":"0-150V","offer_id":51550329503990,"sku":"APL237895-V3","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370892_apl237895_jpeg.jpg?v=1787791066"},{"product_id":"apl415601","title":"BEP Heavy Duty CB Module - 135A 705-135A","description":"\u003cb\u003eHeavy Duty CB Module, 135A\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e705 Contour Circuit Breaker HD allows switchable protection for heavy duty circuits like Windlasses or Davit winches utilizing Bussmann Heavy Duty thermal circuit breakers.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eModular sizing with contour lock moulding allows easy grouping\u003c\/li\u003e\n\u003cli\u003eLED to indicate circuit is on\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550329700598,"sku":"APL415601","price":172.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1104930_apl415601jpg.jpg?v=1787791080"},{"product_id":"apl520881","title":"Clipper BM-1CW Battery Monitor Compact White BM-1CW","description":"\u003cp\u003eCompact battery monitor, just 124 x 62mm x 23mm!\u003c\/p\u003e\n\u003cp\u003eBased on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium.\u003c\/p\u003e\n\u003cp\u003eCaravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-1 Compact is supplied with a precision 100 Amp shunt and prefabricated cables to enable simple DIY installation.\u003c\/p\u003e\n\u003cp\u003eThe unit continually monitors the voltage, the current (charge or discharge) and calculates the state of charge together with the time remaining to charge or discharge the battery.\u003c\/p\u003e\n\u003cp\u003eThis information can lead to a more efficient use of the battery enhancing its life and reducing the risk of failure.\u003c\/p\u003e\n\u003cp\u003eOperation is very simple. One screen displays the voltage, current (charge or discharge) and a bar graph showing the remaining capacity. A flashing alarm is also included to warn if the capacity is getting too low. A second screen shows the remaining time available at the current charge\/discharge rate together with the remaining capacity in both analog and digital format.\u003c\/p\u003e\n\u003cp\u003eThe BM1 Compact consumes a miserly 1.5mA! \u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Clipper","offers":[{"title":"Default Title","offer_id":51550331371766,"sku":"APL520881","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1107915_apl520881jpg.jpg?v=1787791171"},{"product_id":"apl930024","title":"Vimar Arké Interchangeable Buttons for RF Switches, For EnOcean, Bluetooth and ZigBee RF Devices, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Arké 19506 is an interchangeable button range for compatible EnOcean, Bluetooth, and ZigBee radiofrequency devices. It covers both 1-module and 2-module layouts in Grey, Metal, and White finishes, so the visible control point can be matched to the rest of an Arké interior installation without changing the underlying RF system.\u003c\/p\u003e\u003cp\u003eThis is the visible button and cover element, not the electronic radio device itself. The listed 1-module versions measure 44.7 x 44.4 x 6.4 mm, while the listed 2-module versions measure 44.5 x 44.4 x 6.7 mm. On a boat, that makes this range more relevant for compact interior switch positions where finish, layout, and compatibility with the existing Arké RF setup matter as much as the control function.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable front button range for compatible Arké EnOcean, Bluetooth, and ZigBee RF control devices\u003c\/li\u003e\n\u003cli\u003eAvailable in 1-module and 2-module formats to match the underlying control layout\u003c\/li\u003e\n\u003cli\u003eFinish options across the range include Grey, Metal, and White\u003c\/li\u003e\n\u003cli\u003e1-module versions are supplied as 2-piece button sets, while 2-module versions use the wider 2-module format\u003c\/li\u003e\n\u003cli\u003eGrey and white variants use thermoplastic construction with a matt finish and are halogen-free\u003c\/li\u003e\n\u003cli\u003eMetal variants use lacquered thermoplastic with a matt aluminium-colour finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range changes by two main attributes: finish and module width. Finish options are Grey, Metal, and White, and each finish is available in either a 1-module or 2-module version.\u003c\/p\u003e\u003cp\u003eThe 1-module versions use the narrower format and are supplied as 2-piece button sets. The 2-module versions use the wider button format for matching 2-module RF control points. Across the range, the intended use stays centered on Arké radiofrequency controls for EnOcean, Bluetooth, and ZigBee devices, while the visible difference is mainly the width and finish.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis range is the front button piece for the Arké RF device family. It does not replace the electronic insert behind the button, and it is not the surrounding frame. That matters on refits and repairs where the boat already has Arké hardware in place and only the visible button needs to be replaced or updated.\u003c\/p\u003e\u003cp\u003eCheck the existing module width before ordering. A 1-module position and a 2-module position are different physical formats, and the finish change is cosmetic rather than a change to the radio standard or operating logic.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor marine installations, this range makes the most sense in protected interior spaces such as cabins, saloons, enclosed helm consoles, and service panels where RF switching is already part of the fit-out. The grey and white variants are rated IP40, which points them to dry locations rather than open cockpits, exterior bulkheads, or any area that sees regular spray or washdowns.\u003c\/p\u003e\u003cp\u003eIt is a sensible match for boats that already use Vimar Arké controls and need a replacement button face, a different finish, or a consistent look across several interior control points. The Metal option gives an aluminium-colour appearance, while Grey and White keep a more standard Arké finish.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"1 Module \/ White","offer_id":51550334550262,"sku":"APL930024-V1","price":4.42,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Metal","offer_id":51550334583030,"sku":"APL930024-V7","price":5.4,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ Metal","offer_id":51550334615798,"sku":"APL930024-V5","price":5.4,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ Grey","offer_id":51550334648566,"sku":"APL930024-V6","price":4.42,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Grey","offer_id":51550334681334,"sku":"APL930024-V9","price":4.42,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ White","offer_id":51550334714102,"sku":"APL930024-V8","price":4.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363150_apl930024_jpeg.jpg?v=1787791192"},{"product_id":"apl057835","title":"Corrosion Block High Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable \u0026 Non-Toxic 25016","description":"\u003cp\u003e\u003cstrong\u003eHigh Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable \u0026amp; Non-Toxic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCorrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.\u003c\/p\u003e\n\u003cp\u003eCorrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring Harnesses\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterproof\u003c\/li\u003e\n\u003cli\u003eMulti grease compatible\u003c\/li\u003e\n\u003cli\u003eExcellent thermal \/ oxidative stability\u003c\/li\u003e\n\u003cli\u003eResists bleeding or melting at high temperatures\u003c\/li\u003e\n\u003cli\u003eSuitable for sealed for life applications\u003c\/li\u003e\n\u003cli\u003eUse in electrical applications that require grease\u003c\/li\u003e\n\u003cli\u003eWorkplace safe \u0026amp; environmentally friendly\u003c\/li\u003e\n\u003cli\u003eOut performs competitive grease 5:1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Corrosion Block","offers":[{"title":"Default Title","offer_id":51550335205622,"sku":"APL057835","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1092288_apl057835jpg.jpg?v=1787791231"},{"product_id":"apl483261","title":"Vimar Eikon Push Button Switch, 1P NO, 10A 250V, With Indicator Unit, Flush-Mount, IP40, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20068 is a 1-pole, normally open momentary push button rated 10 A at 250 V~ with an indicator window for a signalling unit. It is a flush-mounted module that snaps into compatible frames and cover plates, with a front protection rating of IP40 and a compact body size of 22.30 mm wide, 49.00 mm high, and 38.50 mm deep.\u003c\/p\u003e\u003cp\u003eThis style of push button is commonly used on boats for momentary control and signalling, such as triggering a relay, sounding a buzzer, or sending a control input to another device, while the indicator window can be used to show status once a compatible signalling unit is installed. IP40 is suited to protected interior areas like cabins, nav stations, and inside consoles, not exposed locations where spray, washdowns, or heavy condensation are expected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO momentary contact (closes only while pressed), rated 10 A at 250 V~\u003c\/li\u003e\n\u003cli\u003eIntegrated indicator window with diffuser; signalling unit is not included\u003c\/li\u003e\n\u003cli\u003eFlush-mounted module with engage (snap) fastening for modular installations\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior, dry mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact body: 22.30 mm width, 49.00 mm height, 38.50 mm depth\u003c\/li\u003e\n\u003cli\u003eSingle rocker layout with label space to identify the circuit or function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis push button is offered in multiple configurations so you can match the faceplate finish and the indicator color used in the installation.\u003c\/p\u003e\u003cp\u003eThe finish and the indicator diffuser color are what change between versions. The contact type and electrical rating (1P NO, 10 A at 250 V~), IP40 protection, and the 22.30 x 49.00 x 38.50 mm body size remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20068.B.N: Finish Silver; Indicator White Indicator. This version matches silver-themed installations and keeps the indicator window a neutral white.\u003c\/li\u003e\n\u003cli\u003eVM20068.B: Finish Grey; Indicator White Indicator. A grey finish works well in darker panels and helm areas where glare and contrast are a concern.\u003c\/li\u003e\n\u003cli\u003eVM20068.B.B: Finish White; Indicator White Indicator. A white finish blends into light-colored bulkheads and switch panels, with a white diffuser for the indicator window.\u003c\/li\u003e\n\u003cli\u003eVM20068.V.B: Finish White; Indicator Green Indicator. A green indicator diffuser helps separate a function from other white indicators on the same panel, such as status or enable signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan this as a flush-mounted installation in a suitable back box, then snap the module into the compatible frame before fitting the cover plate. Allow for the 38.50 mm device depth and enough room for wire bends and terminations behind the switch.\u003c\/p\u003e\u003cp\u003eIf you want the indicator to illuminate, the unit is supplied without the signalling unit, so the lighting component needs to be selected and installed separately as part of the system.\u003c\/p\u003e\u003ch6\u003eElectrical and on-board use\u003c\/h6\u003e\u003cp\u003eWith a 10 A rating at 250 V~, this push button can be used on onboard AC circuits within that limit, and it is also commonly used as a low-current control input for relays or contactors when you do not want the load current passing through the panel device. Because it is normally open and momentary, any function that needs to stay on typically relies on the controlled equipment, a relay, or a separate latching circuit.\u003c\/p\u003e\u003ch6\u003eTypical uses on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for interiors that already use Vimar Eikon modular switchgear and need a clean momentary control with an optional status indicator. It fits well for refits where you are standardizing panel controls across cabins, galley, nav station, and protected helm areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the front face clean with a soft cloth and avoid solvents that can haze plastics. In humid environments, place the device in a protected panel location and keep wiring compartments ventilated to reduce condensation around electrical terminations.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White Indicator \/ White","offer_id":51550335566070,"sku":"APL483261-V5","price":31.25,"currency_code":"USD","in_stock":true},{"title":"Green Indicator \/ White","offer_id":51550335598838,"sku":"APL483261-V6","price":31.25,"currency_code":"USD","in_stock":false},{"title":"White Indicator \/ Silver","offer_id":51550335631606,"sku":"APL483261-V1","price":35.25,"currency_code":"USD","in_stock":true},{"title":"White Indicator \/ Grey","offer_id":51550335664374,"sku":"APL483261-V3","price":32.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1269417_apl483261_jpeg.jpg?v=1787791264"},{"product_id":"apl537712","title":"Sea-Dog - Mini Battery Switch Key","description":"\u003ch4\u003eEnhance Security with Sea-Dog's Mini Battery Switch Key\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eSea-Dog Mini Battery Switch Key with Removable Knob - 32V \u0026amp; 300A\u003c\/strong\u003e, a compact and secure solution designed to enhance the safety and efficiency of your marine electrical system. Featuring a unique removable knob, this mini battery switch offers an added layer of security, preventing unauthorized use by allowing you to easily detach and carry the knob with you. Its small footprint makes it perfect for installations where space is at a premium. Rated for 300A continuous and 1000A cranking amps, it ensures reliable performance for most marine applications. Installation is straightforward, requiring just a 2-1\/16\" hole. Constructed from durable machined brass and injection molded nylon, it's built to withstand the harsh marine environment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable knob for enhanced security and peace of mind\u003c\/li\u003e\n\u003cli\u003eCompact design ideal for tight spaces\u003c\/li\u003e\n\u003cli\u003eEasy installation with a simple 2-1\/16\" hole\u003c\/li\u003e\n\u003cli\u003eRated for 300A continuous and 1000A cranking amps\u003c\/li\u003e\n\u003cli\u003eConstructed from durable machined brass and injection molded nylon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRobust Construction: Technical Specifications\u003c\/h4\u003e\n\u003cp\u003eThe Sea-Dog Mini Battery Switch Key is a testament to innovative engineering, offering a blend of reliability and convenience. With three switch positions (On, Off, and Out), it provides versatile control over your boat's power supply. Its robust construction ensures it can handle the demands of the marine environment, making it a trustworthy addition to your vessel.\u003c\/p\u003e\n\u003ch4\u003eCompact and Efficient: Product Dimensions\u003c\/h4\u003e\n\u003cp\u003eThis mini battery switch features a discreet yet effective design, with a switch face width of just 2-1\/16 inches. It's compatible with 32 volts systems and supports up to 300 amps of continuous load, making it suitable for a wide range of boats and yachts.\u003c\/p\u003e\n\u003ch4\u003ePower Control at Your Fingertips: Available Variations\u003c\/h4\u003e\n\u003cp\u003eSea-Dog caters to various power management needs by offering the Mini Battery Switch Key in different amperage ratings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e422730-1 300 Amp:\u003c\/strong\u003e Ideal for higher power applications, providing ample capacity for continuous and cranking amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e422732-1 100 Amp:\u003c\/strong\u003e Perfect for smaller vessels or lower power requirements, offering the same level of security and convenience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the variant that best suits your power management needs, ensuring your marine adventures are both safe and enjoyable.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"300 Amp","offer_id":51550335795446,"sku":"APL537712-V6","price":66.45,"currency_code":"USD","in_stock":true},{"title":"100 Amp","offer_id":51550335828214,"sku":"APL537712-V1","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0712370_apl537712.jpg?v=1787791236"},{"product_id":"apl266135","title":"Vimar Eikon Blank Module, 1 Module, Flush Mount, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20041 Blank Module is a 1-module blank insert for closing an unused opening in a flush-mounted Eikon switch or outlet assembly. It has a 22.30 x 49.00 x 20.50 mm body, built-in mounting, and claw fastening, so it sits in the same modular layout as the active devices around it rather than leaving an open space in the panel.\u003c\/p\u003e\u003cp\u003eThis is a non-electrical component with nominal voltage listed at 0 V, so its job is purely to finish the layout and keep the face of the panel clean and consistent. The body is thermoplastic, halogen-free, and finished in matte white, grey, or silver depending on the variant. On board, it makes sense anywhere a helm panel, cabin switch bank, or interior control point has an unused 1-module position that still needs a finished look.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1-module blank insert for unused openings in Vimar Eikon modular assemblies\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBody size of 22.30 x 49.00 x 20.50 mm for standard 1-module fit within the range\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in mounting with claw fastening for flush-mounted installations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThermoplastic construction that is halogen-free\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMatte front surface with label space on the module face\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNon-electrical insert with nominal voltage 0 V and no monitoring contact\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple colour configurations within the same 1-module blank insert format.\u003c\/p\u003e\u003cp\u003eAcross the range, the size, 1-module layout, built-in mounting, claw fastening, thermoplastic body, halogen-free construction, matte appearance, and front label surface stay consistent. The main difference is the visible finish, with white, grey, and silver options for matching nearby plates and devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eVM20041.B: White. This version keeps the panel light in appearance and suits layouts built around white Eikon plates and devices.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM20041: Grey. This version matches grey Eikon layouts and keeps unused module positions visually consistent with darker switch panels.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM20041.N: Silver. This version uses the silver Next finish for installations built around silver-toned Eikon trim and devices.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis blank module is a good match for installations that already use the Vimar Eikon modular system and need to close a spare 1-module opening without changing the frame layout. It is most useful during refits, when a device has been removed, or when extra module space is being left available for later expansion.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the series, module count, and panel finish already on the boat. The blank module matches the Eikon family and fits a single module position, so it should be paired with the correct Eikon support and cover plate arrangement already in the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is a built-in insert with claw fastening, it is suited to flush panel work where you want the face of the assembly to stay neat and even. There is no circuit function to wire, which makes it a straightforward way to finish a panel opening while keeping access to the same modular layout for future changes.\u003c\/p\u003e\u003cp\u003eIt is a sensible option for boat owners, installers, and yards tidying up helm stations, cabin switch banks, or interior panels after equipment changes. It also works when a new panel is being built in stages and one module position needs to stay closed until another device is added later.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver","offer_id":51550336155894,"sku":"APL266135-V5","price":2.95,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":51550336188662,"sku":"APL266135-V7","price":2.4,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550336221430,"sku":"APL266135-V0","price":2.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363355_apl266135_jpeg.jpg?v=1787791297"},{"product_id":"apl214541","title":"Vimar Idea RJ45 R\u0026M IBM Adaptor, For R\u0026M Freenet and IBM Type C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16365 is an RJ45 adaptor for R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connectors within the IDEA modular range. It is used where a data connection needs to sit neatly in a switch or outlet position, with front label space that helps identify the run, outlet, or connected system.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this kind of adaptor makes sense at a navigation station, cabin communications point, helm console, or service panel where structured cabling is already part of the installation. The listed device depth is 21.0 mm on both variants, and the device height varies by colour, with 50.1 mm for the ivory version and 45.0 mm for the gray version.\u003c\/p\u003e\u003cp\u003eThis is an adaptor rather than a complete data outlet, so the main fit check is the connector family already used in the vessel and the matching IDEA mounting system around it. The open front and the absence of a hinged lid keep the port easy to access for patching, inspection, and relabelling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts RJ45 connector formats used in R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C installations\u003c\/li\u003e\n\u003cli\u003eMade for the Vimar IDEA modular range\u003c\/li\u003e\n\u003cli\u003eFront label space helps identify cabin outlets, network runs, or onboard systems\u003c\/li\u003e\n\u003cli\u003eNo hinged lid, so the connection point stays easy to reach and inspect\u003c\/li\u003e\n\u003cli\u003e21.0 mm device depth on both variants, which helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eAvailable in two colour finishes to match surrounding trim and switchgear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in two colour configurations.\u003c\/p\u003e\u003cp\u003eThe colour changes between variants. Both versions are RJ45 adaptors for the same R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connector families, both include label space, both have no hinged lid, and both are listed with a 21.0 mm device depth. The listed device height differs between the two colours.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16365.C.B, Color: Ivory. This lighter finish suits interior panels and trim where the surrounding hardware is off-white or cream in tone.\u003c\/li\u003e\n\u003cli\u003eVM16365.C, Color: Gray. This darker finish blends more easily with gray switch frames, utility panels, and technical spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm that the RJ45 connector format in your installation matches R\u0026amp;M Freenet system or IBM Advanced Connectivity System Type C. It is also worth checking that the mounting position on the boat uses the IDEA series format and that the back box or panel depth is suitable for a 21.0 mm device body.\u003c\/p\u003e\u003cp\u003eThis product is a good match for boats with structured data cabling in the cabin, chart table, or electronics console, especially where a clean panel finish and clear circuit identification matter as much as connector compatibility.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eBecause the front stays open and there is no lid, this adaptor is better suited to enclosed interior locations where the connection needs to stay accessible. It works well in places where crew or service technicians may need to patch a network lead, trace a cable run, or identify a connection quickly during refit and maintenance work.\u003c\/p\u003e\u003cp\u003eFor a tidy result, pair the adaptor with the correct surrounding module and keep the outlet label consistent with the vessel's network or systems map. That small detail saves time later when tracing data lines behind helm panels or cabin joinery.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550336450806,"sku":"APL214541-V8","price":14.29,"currency_code":"USD","in_stock":false},{"title":"Ivory","offer_id":51550336483574,"sku":"APL214541-V3","price":13.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364399_apl214541_jpeg.jpg?v=1787791321"},{"product_id":"apl486863","title":"Vimar Push Button Switch, For Refrigerator, 1-Pole NC, 250VAC, 60W, Pillar Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM00900 is a 1-pole normally closed (NC) push button rated 250 V AC and 60 W (0.24 A), with screw-type pillar terminals and a white finish with a matte surface.\u003c\/p\u003e\u003cp\u003eBecause it is normally closed, the circuit stays closed at rest and opens when you press the button. That behavior is commonly used for control and interlock functions on board, including refrigerator control circuits where a button press needs to interrupt the circuit.\u003c\/p\u003e\u003cp\u003eIt fastens with screws and uses a shallow 10 mm built-in depth, which helps when you are working in tight helm, galley, or locker panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, normally closed (NC) push button action\u003c\/li\u003e\n\u003cli\u003eRated 250 V AC, 60 W (0.24 A nominal)\u003c\/li\u003e\n\u003cli\u003eScrew-type pillar terminals for straightforward terminations\u003c\/li\u003e\n\u003cli\u003eScrew-mounted fastening with 10 mm built-in depth\u003c\/li\u003e\n\u003cli\u003eNon-illuminated button with no imprint for simple panel labeling\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matte surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eKeep the switched circuit within the 60 W rating at 250 V AC. For anything that draws more than that, use the button to switch a relay, contactor, or control input instead of feeding the load directly through the contacts.\u003c\/p\u003e\u003cp\u003eTerminate conductors fully under the screw terminals, then support the wiring so vibration or a tug on the cable cannot work the connection loose. Always isolate shore power and inverter feeds before opening an AC panel.\u003c\/p\u003e\u003ch6\u003eMaterials and placement\u003c\/h6\u003e\u003cp\u003eThe thermoplastic housing suits interior electrical spaces. Mount it where it stays out of washdowns and spray, and keep the back of the unit away from areas where condensation can collect.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis push button suits refits where you need a compact NC momentary contact for a refrigerator circuit, a safety interlock, or a service stop function in a small control box. It also works well when you are standardizing controls across a boat and want a consistent look in white.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550339629302,"sku":"APL486863","price":6.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826576_apl-mzk-qxw-iqh.jpg?v=1787791363"},{"product_id":"apl700747","title":"Newmar Power - Galvanic Isolator Fail Safe","description":"\u003ch4\u003ePrevent Corrosion and Ensure Safety with Advanced Galvanic Protection\u003c\/h4\u003e\u003cp\u003eThe Newmar GI-30-FS Galvanic Isolator is engineered to protect your vessel's vital metallic components from galvanic corrosion while maintaining the integrity of the AC safety ground. By blocking low-voltage currents that cause corrosive action, this isolator significantly reduces the wear on sacrificial anodes, saving you money on boat maintenance and zinc replacement. Designed to meet the latest ABYC A-28 2019 standards, this fail-safe galvanic isolator provides robust and reliable protection in the harsh marine environment.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cp\u003eThe Newmar GI-30-FS Galvanic Isolator offers comprehensive protection and reliability, making it an essential addition to your marine safety equipment. Here’s a detailed look at its features:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion Prevention\u003c\/strong\u003e: Effectively blocks low-voltage currents, reducing galvanic corrosion on metal components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Assurance\u003c\/strong\u003e: Maintains a safe environment by ensuring the AC safety ground path is preserved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFail-Safe Design\u003c\/strong\u003e: Features a 30A fail-safe mechanism to maintain ground connection even if the isolator fails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified Protection\u003c\/strong\u003e: Certified to the UL1500 standard for Ignition Protection, ensuring high safety standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Resilience\u003c\/strong\u003e: Tested to withstand ambient temperatures up to 50°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Safety Path\u003c\/strong\u003e: Includes a large capacitor providing a low-impedance path for AC current to the ground.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSimplified Overview: Key Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore Power Voltage\u003c\/strong\u003e: 115–230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Short Circuit\u003c\/strong\u003e: 5000 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStray Current Protection\u003c\/strong\u003e: Up to 1.4 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (LxWxH)\u003c\/strong\u003e: 200 x 189 x 68.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmperage\u003c\/strong\u003e: 30A (available in 60A variant)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eRobust and Compact Design\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 200 x 189 x 68.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: Built for easy installation and integration into your marine electrical system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eDesigned for Marine Excellence\u003c\/h4\u003e\u003cp\u003eThe Newmar GI-30-FS Galvanic Isolator is crafted to provide exceptional corrosion protection and maintain the safety of your vessel's electrical system. Its advanced features and compliance with stringent safety standards make it a reliable choice for any marine application.\u003c\/p\u003e\u003ch4\u003eProduct Variations: Tailored to Your Needs\u003c\/h4\u003e\u003cp\u003eChoose the Newmar Galvanic Isolator variant that best suits your specific requirements:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGI-30-FS Amperage 30A\u003c\/strong\u003e: Standard model for most marine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGI-60-FS Amperage 60A\u003c\/strong\u003e: Higher capacity model for more demanding needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConclusion\u003c\/h3\u003e\u003cp\u003eSafeguard your marine vessel against galvanic corrosion with the Newmar GI-30-FS Galvanic Isolator. Its robust design, advanced features, and fail-safe operation ensure both protection and safety for your boat's metallic components. Select the variant that meets your needs and enjoy the peace of mind that comes with superior galvanic protection. Trust Newmar for reliable and efficient solutions in the marine environment.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"60A","offer_id":51550340546806,"sku":"APL700747-5","price":426.0,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":51550340579574,"sku":"APL700747-3","price":324.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717893_apl700747.jpg?v=1787791427"},{"product_id":"apl335078","title":"Bluewater - Button Switch - Off\/On Contact - Blue\/Red LED - 1' Lead","description":"\u003ch3\u003eSleek and Reliable Control for Your Marine Vessel\u003c\/h3\u003e\u003cp\u003eIntroducing the Bluewater 22mm Push Button Switch, a stylish and functional addition to any marine dashboard. This stainless-steel plated button features a standard Off\/On contact, providing reliable control for your marine equipment. Its modern design, combined with advanced features, ensures that your marine controls are both visually appealing and highly efficient.\u003c\/p\u003e\u003ch3\u003eBuilt for Marine Durability and Performance\u003c\/h3\u003e\u003cp\u003eThe Bluewater Push Button Switch is engineered to withstand harsh marine environments, boasting an IP69K waterproof rating for maximum protection against water and dust. Its rugged stainless-steel construction and included gasket provide additional durability, making it suitable for even the toughest conditions. At night, the switch is backlit with a blue LED light for clear visibility, which changes to red when activated, providing immediate status indication.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP69K for maximum protection against water and dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Indicators:\u003c\/strong\u003e Blue for off state, red for on state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e High-quality stainless steel ensures longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Simple setup with color-coded contacts for safety and convenience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Contact:\u003c\/strong\u003e Off\/On functionality for versatile control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Off-On (standard contact)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Colors:\u003c\/strong\u003e Off: Blue; On: Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Mark Page:\u003c\/strong\u003e Red dot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Rating:\u003c\/strong\u003e 15A \/ 12-24VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Life:\u003c\/strong\u003e 50,000 cycles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Life:\u003c\/strong\u003e 10,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompact and Efficient Design\u003c\/h3\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 22mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Length:\u003c\/strong\u003e 1 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesigned for Marine Excellence\u003c\/h3\u003e\u003ch4\u003ePremium Finishes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Body:\u003c\/strong\u003e Provides a sleek, modern look while ensuring durability and resistance to corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP69K Rating:\u003c\/strong\u003e Ensures the switch remains waterproof and dustproof, suitable for all marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEasy and Secure Installation\u003c\/h3\u003e\u003cp\u003eInstalling the Bluewater Push Button Switch is straightforward:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill a 22mm Hole:\u003c\/strong\u003e Suitable for materials up to 6mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect Contacts:\u003c\/strong\u003e Attach the 3 color-coded contacts for the button and the 2 contacts for the LED.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eVariations List\u003c\/h3\u003e\u003cp\u003eTo cater to different needs, the Bluewater Push Button Switch comes in various sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22mm Model:\u003c\/strong\u003e Standard size, perfect for most marine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19mm Model:\u003c\/strong\u003e Slightly smaller option for more compact installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExperience Unmatched Reliability with Bluewater\u003c\/h3\u003e\u003cp\u003eUpgrade your marine dashboard with the Bluewater 22mm Push Button Switch. Designed for both functionality and style, this switch offers unparalleled performance and durability in any marine environment. Whether you’re navigating through rough waters or docked at the marina, this switch ensures your boat’s controls are always clear and easy to use. Illuminate your adventures with the trusted reliability of Bluewater.\u003c\/p\u003e","brand":"Bluewater","offers":[{"title":"19mm","offer_id":51550341628150,"sku":"APL335078-3","price":63.0,"currency_code":"USD","in_stock":true},{"title":"22mm","offer_id":51550341660918,"sku":"APL335078-4","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717505_apl332160.jpg?v=1787791487"},{"product_id":"apl193849","title":"BEP Marine - 902-AM 12 Way DC Circuit Breaker Panel","description":"\u003ch4\u003eReliable and Efficient DC Circuit Breaker Panel for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe BEP Marine 902-AM 12 Way DC Circuit Breaker Panel is designed for high-performance electrical management in marine environments. Built with durability and ease of use in mind, this panel offers a streamlined and stylish solution for controlling and monitoring your vessel’s DC power system. With a compact yet robust design, it is ideal for boats, yachts, and other marine vessels requiring a reliable power distribution panel.\u003c\/p\u003e\u003ch4\u003eSuperior Build Quality for Harsh Marine Conditions\u003c\/h4\u003e\u003cp\u003eConstructed with marine-grade powder-coated aluminum, the 902-AM circuit breaker panel is built to withstand the demanding conditions of the marine environment. Its corrosion-resistant finish ensures longevity and reliability, making it a solid investment for any vessel.\u003c\/p\u003e\u003ch4\u003eAdvanced Circuit Protection and Monitoring\u003c\/h4\u003e\u003cp\u003eEquipped with high-quality Airpax circuit breakers, this panel provides dependable circuit protection to safeguard your onboard electrical systems. The inclusion of green LED backlit labels enhances visibility, while the red LED indicators clearly show when systems are active. These features provide easy monitoring and quick identification of power status, even in low-light conditions.\u003c\/p\u003e\u003ch4\u003eCompliance with Industry Standards\u003c\/h4\u003e\u003cp\u003eThe BEP Marine 902-AM panel meets ABYC standards, ensuring safety, reliability, and compliance with marine electrical regulations. This adherence to industry best practices gives boat owners and operators confidence in the panel’s performance and safety.\u003c\/p\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetric:\u003c\/strong\u003e 200 x 239 x 65 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImperial:\u003c\/strong\u003e 7.9 x 9.4 x 2.6 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDurable marine-grade powder-coated aluminum construction\u003c\/li\u003e\n\u003cli\u003eHigh-performance Airpax circuit breakers for reliable protection\u003c\/li\u003e\n\u003cli\u003eSleek Contour Design facia for a modern and professional appearance\u003c\/li\u003e\n\u003cli\u003eGreen LED backlit labels for enhanced visibility\u003c\/li\u003e\n\u003cli\u003eRed LED indicators to show active systems at a glance\u003c\/li\u003e\n\u003cli\u003eCompliant with ABYC standards for safety and performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550342381814,"sku":"APL193849","price":799.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834221_apl193849.jpg?v=1787791528"},{"product_id":"apl716030","title":"Attwood Marine Bilge Pump Switch, 6-32V DC, 10A, Panel Mount, 1\/4 in Spade Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine bilge pump switch is a panel-mounted rocker switch for controlling a bilge pump from the helm, cockpit, or another accessible station on board. It is used with DC bilge pump circuits drawing 10 amps or less and supports 6V through 32V DC systems, making it suitable for many 12V and 24V boat installations.\u003c\/p\u003e\u003cp\u003eThe switch uses 1\/4 in. spade terminals and has a face plate measuring 2-13\/16 in. x 1-7\/8 in. It is a practical replacement or upgrade when a simple pump control panel is needed without adding a larger switch panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePanel-mounted rocker format for clean installation at the helm, console, cabin panel, or service area.\u003c\/li\u003e\n\u003cli\u003eSupports 6V through 32V DC bilge pump circuits with a maximum pump draw of 10 amps.\u003c\/li\u003e\n\u003cli\u003eUses 1\/4 in. spade terminals for straightforward wiring with common marine crimp connectors.\u003c\/li\u003e\n\u003cli\u003eFace plate measures 2-13\/16 in. x 1-7\/8 in. for a compact panel footprint.\u003c\/li\u003e\n\u003cli\u003eAvailable in 2-way and 3-way versions to match basic manual control or automatic bilge pump control layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis bilge pump switch is offered in two switch-position configurations for different bilge pump wiring setups.\u003c\/p\u003e\u003cp\u003eThe 2-way version is for simple On\/Off pump control. The 3-way version adds Auto\/Off\/Manual control for use with an automatic bilge pump or a float-switch controlled bilge system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7615-3: Switch positions 2-Way. This version gives straightforward On\/Off control when the operator wants direct manual control of the bilge pump circuit.\u003c\/li\u003e\n\u003cli\u003e7615A3: Switch positions 3-Way. This version gives Auto\/Off\/Manual control so the pump can be left in automatic mode, shut off, or run manually from the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the switch on a flat panel with enough depth behind it for the switch body and wiring. The circuit should be fused according to the bilge pump instructions, and all wiring should be secured so vibration and movement do not pull on the terminals.\u003c\/p\u003e\u003cp\u003eRun pump wiring so connections stay above the highest possible water level, and make water-resistant electrical connections in the bilge area. This switch is not external ignition protected, so it should not be installed where ignition-protected equipment is required.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch is a good match for small to mid-size boats that need a dedicated bilge pump control at the helm, console, or electrical panel. It works well for replacing a worn bilge rocker switch or adding a simple control point during a bilge pump installation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"2-Way","offer_id":51550342414582,"sku":"APL716030-V0","price":28.86,"currency_code":"USD","in_stock":false},{"title":"3-Way","offer_id":51550342447350,"sku":"APL716030-V1","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327722_apl716030.webp?v=1787791533"},{"product_id":"apl531538","title":"Vimar Plana 1P NC Pushbutton Mechanism, 10A 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14010.0 is a Plana-series 1-pole, normally-closed (NC) push button mechanism rated 10 A at 250 V AC, and it accepts a locator or indicator light when paired with a compatible light module. In NC operation the circuit is closed at rest and opens while you press the button, then returns to closed when released.\u003c\/p\u003e\u003cp\u003eThis mechanism is meant for flush mounting in Plana modular plates and is completed with a 1-, 2- or 3-module button. With an IP40 protection rating, it belongs in protected interior locations such as a cabin switch panel, nav station, or inside a console, not in areas exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole NC momentary contact: circuit opens only while the button is pressed\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A at 250 V AC for circuits that stay within the switch rating\u003c\/li\u003e\n\u003cli\u003eLightable mechanism that supports adding an indicator or locator light with a compatible light module\u003c\/li\u003e\n\u003cli\u003eCompletes with 1-, 2- or 3-module Plana button to match common modular panel layouts\u003c\/li\u003e\n\u003cli\u003eFlush-mounted form factor with snap-in fastening for quick installation in the support\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with glossy white finish (RAL 9003)\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, enclosed spaces behind a panel\u003c\/li\u003e\n\u003cli\u003eCompact size: 22.3 mm wide, 49.0 mm high, 38.7 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is part of the Vimar Plana modular system. It is intended to be finished with a matching Plana button and installed into the appropriate Plana mounting support and cover plate format for your panel.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003ePlan the function first: an NC push button is commonly used where the circuit should remain closed until someone presses the button, such as an alarm loop, interlock, or a control input that needs to open on command. For switching loads directly, confirm the load type and switching current are within the 10 A, 250 V AC rating and that your enclosure and wiring are suitable for the circuit on board.\u003c\/p\u003e\u003cp\u003eOnce installed, the engage snap fastening holds the mechanism in place. After a few trips, it is worth re-checking terminal tightness since boats see vibration and temperature swings.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits or new builds that already use Plana modules in interior panels and want a push button that keeps the panel tidy and stays easy to service. If the mounting spot is anywhere that regularly sees salt spray, rain, or washdowns, a sealed, higher-IP device is the better fit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face and surrounding plate clean and dry, and avoid aggressive solvents that can haze glossy plastics. In technical spaces, a quick periodic check for moisture ingress and corrosion at the terminals helps prevent intermittent faults.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550345134326,"sku":"APL531538","price":13.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826955_apl-r3s-vch-xev.jpg?v=1787791635"},{"product_id":"apl725529","title":"Blue Sea Systems easyID ATC Fuse Kit, 31-Piece, 32V DC, LED Blown-Fuse Indication","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 5290 is an illuminated ATC fuse kit for 12V and 24V DC systems that makes a blown fuse easy to spot behind a dash, inside a helm console, or in any fuse panel with poor light. The kit includes 31 fast-acting easyID fuses plus a fuse puller, and the fuses are rated for up to 32V DC.\u003c\/p\u003e\u003cp\u003eIt replaces standard ATO and ATC blade fuses, so it fits the same style holders and fuse blocks already used on many boats. That makes it a straightforward spare kit for onboard electrical service without changing the panel or fuse format.\u003c\/p\u003e\u003cp\u003eFor owners who troubleshoot their own DC system, this kit is useful where fuse panels sit under the helm, behind access panels, or inside lockers where a blown fuse can be hard to find at a glance.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIlluminated ATC blade fuses with LED indication when a fuse has blown\u003c\/li\u003e\n\u003cli\u003eDirect replacement for standard non-illuminating ATO and ATC fuses\u003c\/li\u003e\n\u003cli\u003e31-piece assortment with a fuse puller for onboard spares and routine service\u003c\/li\u003e\n\u003cli\u003eCovers 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A, and 40A circuit protection needs\u003c\/li\u003e\n\u003cli\u003eFast-acting fuse style for common branch circuits on marine DC systems\u003c\/li\u003e\n\u003cli\u003e32V DC maximum operating voltage and 1000A interrupt capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is intended for fuse positions that take standard ATO or ATC blade fuses. It is not a match for mini, maxi, glass, ANL, or MRBF fuse locations, so the fuse style on the boat should be checked before ordering.\u003c\/p\u003e\u003cp\u003eBecause the assortment covers common amp ratings used on accessory and branch circuits, it works well as a spare kit for lighting, pumps, electronics, and other fused 12V or 24V loads that already use the ATO or ATC format.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners, installers, and service techs who want quicker fault finding in low-light spaces and a wider range of spare fuse ratings in one case. It suits cruising boats, center consoles, skiffs, and workboats where access to the fuse panel is often tight and lighting is limited.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 fuse puller\u003c\/li\u003e\n\u003cli\u003e3 x 3A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 5A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 7.5A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 10A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e6 x 15A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 20A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 25A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 30A easyID ATC fuses\u003c\/li\u003e\n\u003cli\u003e3 x 40A easyID ATC fuses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550346117366,"sku":"APL725529","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0369536_apl725529_jpeg.jpg?v=1787791687"},{"product_id":"apl206706","title":"Newmar Power - AC-II Panel","description":"\u003ch4\u003eComprehensive AC Power Management for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNewmar AC-II Panel\u003c\/strong\u003e offers essential control and protection for any vessel equipped with AC power from shore power or generators. Engineered to ensure the safe and efficient management of your marine electrical systems, this panel is a must-have for any serious mariner.\u003c\/p\u003e\u003ch4\u003eGeneral Description\u003c\/h4\u003e\u003cp\u003eThe Newmar AC-II Panel is designed to provide robust protection and control for your vessel's AC power systems. Featuring a double-pole master breaker, it safeguards both the hot and neutral legs of your AC circuit. An integrated power-on indicator light keeps you informed about the operational status, while the reverse polarity light alerts you to any wiring issues that could pose a shock hazard. This combination of features makes the AC-II Panel an indispensable component for maintaining electrical safety and functionality on board.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Pole Master Breaker\u003c\/strong\u003e: Protects both hot and neutral legs of the AC circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-On Indicator Light\u003c\/strong\u003e: Provides clear visibility of the panel's operational status.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse Polarity Warning\u003c\/strong\u003e: Alerts you to wiring issues that could lead to potential shock hazards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Built to withstand the harsh marine environment, ensuring long-lasting performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-Out Dimensions\u003c\/strong\u003e: 4 x 2.5 inches (10.2 x 6.4 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaster Breaker Options\u003c\/strong\u003e: Standard 30 Amp, with optional 15A or 50A configurations available.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel Size\u003c\/strong\u003e: 4 x 2.5 inches (10.2 x 6.4 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 lb.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Compact design and clear indicator lights make for straightforward installation and monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Safety\u003c\/strong\u003e: The reverse polarity warning ensures that any wiring issues are immediately apparent, reducing the risk of electrical shock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Options\u003c\/strong\u003e: Available in 15A, 30A, or 50A configurations to suit various marine electrical requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eThe Newmar AC-II Panel is perfect for any marine vessel requiring reliable AC power management. Whether you are docking at a marina with shore power or using a generator while at sea, this panel provides the necessary control and protection to keep your electrical systems running smoothly and safely.\u003c\/p\u003e\u003ch4\u003eSecure Your Marine Electrical Systems\u003c\/h4\u003e\u003cp\u003eThe Newmar AC-II Panel is an essential tool for any mariner looking to ensure the safety and efficiency of their onboard AC power systems. With its robust features and customizable options, it offers unparalleled control and protection, making it a valuable addition to any vessel.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":51550347854070,"sku":"APL206706","price":188.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717275_apl206706.jpg?v=1787791748"},{"product_id":"apl758266","title":"Vimar IDEA Series General Symbol Push Button, 1P NO, 10A, 250V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar IDEA Series is a range of 1P normally open push buttons with a general symbol for flush-mounted modular installations. Across the listed versions, the rating is 10 A at 250 V, the front size is 21.8 mm wide by 50.1 mm high, and the body clips into place with snap fastening.\u003c\/p\u003e\u003cp\u003eThis type of switch suits protected interior panels where the vessel is already built around the IDEA modular system. The housing is halogen-free thermoplastic with a matt finish and IP40 protection, and depth varies by version, with standard 1-module buttons at about 36.5 mm and the 2-module or luminous versions at 32.5 mm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO push button with general symbol, rated 10 A at 250 V\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular format with snap-in fastening for IDEA system installations\u003c\/li\u003e\n\u003cli\u003eCompact face size of 21.8 mm x 50.1 mm, with shallow depth that helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt surface and label area\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003cli\u003eRange includes grey or white finishes, 1-module and 2 reduced-module formats, plus luminous versions for signalling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes in three ways: colour, module format, and whether the button is arranged for illumination. Standard versions are available in grey or white as a 1-module device, and there are also grey and white versions that occupy 2 reduced modules.\u003c\/p\u003e\u003cp\u003eThe luminous versions are 1-module buttons in grey or white and are intended for use with a signalling unit, which is not included. The 10 A 250 V rating, single push-button operation, matt finish, halogen-free thermoplastic body, and IP40 protection stay the same across the listed versions.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good match when the boat or refit already uses Vimar IDEA supports, frames, and matching modules. Before ordering, check the panel layout for 1-module or 2 reduced-module spacing, confirm the finish you want, and verify the available depth behind the mounting point.\u003c\/p\u003e\u003cp\u003eBecause protection is IP40, it is better suited to protected cabin panels, interior helm areas, and technical spaces than to exposed deck locations or areas that see regular washdowns. For luminous versions, the signalling unit needs to be added separately during assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe built-in format keeps the front neat and works well where several controls need to sit in one modular frame. The general symbol keeps the function neutral, which is useful on vessels where the same switch style is used across cabins, service panels, and protected control positions.\u003c\/p\u003e\u003cp\u003eIt also makes sense for owners and yards replacing one worn module without changing the rest of an existing IDEA installation. Matching the module width and colour is usually the main point to confirm before fitting.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey\/Indicator \/ 1 Module","offer_id":51550348640502,"sku":"APL758266-7","price":18.19,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Modules","offer_id":51550348673270,"sku":"APL758266-1","price":22.5,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module","offer_id":51550348706038,"sku":"APL758266-6","price":15.59,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Modules","offer_id":51550348738806,"sku":"APL758266-0","price":23.39,"currency_code":"USD","in_stock":false},{"title":"White\/Indicator \/ 1 Module","offer_id":51550348771574,"sku":"APL758266-2","price":17.5,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1 Module","offer_id":51550348804342,"sku":"APL758266-9","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828607_apl758266.jpg?v=1787791785"},{"product_id":"apl520830","title":"Clipper BM-1CG Battery Monitor Compact Grey BM-1CG","description":"\u003cp\u003eCompact battery monitor, just 124 x 62mm x 23mm!\u003c\/p\u003e\n\u003cp\u003eBased on the highly successful BM-1 marine battery monitor, the BM-1 Compact is especially designed for applications where space is at a premium.\u003c\/p\u003e\n\u003cp\u003eCaravans, mobile homes, RV's, small boats and renewable power installations can all benefit from the BM-1 Compact. It is able to monitor the performance of any 12 Volt lead acid battery system with a capacity up to 600 AmpHours. The BM-1 Compact is supplied with a precision 100 Amp shunt and prefabricated cables to enable simple DIY installation.\u003c\/p\u003e\n\u003cp\u003eThe unit continually monitors the voltage, the current (charge or discharge) and calculates the state of charge together with the time remaining to charge or discharge the battery.\u003c\/p\u003e\n\u003cp\u003eThis information can lead to a more efficient use of the battery enhancing its life and reducing the risk of failure.\u003c\/p\u003e\n\u003cp\u003eOperation is very simple. One screen displays the voltage, current (charge or discharge) and a bar graph showing the remaining capacity. A flashing alarm is also included to warn if the capacity is getting too low. A second screen shows the remaining time available at the current charge\/discharge rate together with the remaining capacity in both analog and digital format.\u003c\/p\u003e\n\u003cp\u003eThe BM1 Compact consumes a miserly 1.5mA!\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Clipper","offers":[{"title":"Default Title","offer_id":51550352572662,"sku":"APL520830","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1107914_apl520830jpg.jpg?v=1787791917"},{"product_id":"apl484516","title":"BEP Pro Installer Bus Bar - 12 Way - 100A BB-12W-2S\/DSP","description":"\u003cb\u003eBus Bar - 12 Way\/100A with 2 Input Studs (with covers)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eBEP bus bars include tin-plated, brass-insulated mounting bases and flame-resistant flexible plastic covers. The covers are color-coded for polarity and feature a unique push-on fit.\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eBus Type: Single\u003c\/li\u003e\n\u003cli\u003eOutput screws: 12\u003c\/li\u003e\n\u003cli\u003eInput studs: 2\u003c\/li\u003e\n\u003cli\u003eRating (A): 100\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550352769270,"sku":"APL484516","price":51.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1107699_apl484516jpg.jpg?v=1787791931"},{"product_id":"apl304392","title":"Blue Sea Systems Contura Single Bilge Pump Control Panel, 12\/24V DC, IP66, ON-Off-Auto","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8263 is a control panel for a single bilge pump, with a water-resistant face and an ON-OFF-AUTO Contura switch, for 12V or 24V DC systems. It fits a compact panel space at 3.75 in high, 2.25 in wide, and 3.00 in deep.\u003c\/p\u003e\u003cp\u003eThe switch is rated for 20A at 12V DC and 15A at 24V DC, and the fuse holder accepts commonly available AGC and MDL glass fuses up to 20A. An embedded ON LED shows when the pump circuit is running, which helps when you want a quick status check from the helm or dash.\u003c\/p\u003e\u003cp\u003eThis panel gives you a clean control point for manual and automatic bilge pump operation without piecing together separate switch and fuse components. The watertight mounting gasket and water-resistant front suit installations that see spray, including flybridge and open cockpit layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle bilge pump control panel for 12V or 24V DC systems\u003c\/li\u003e\n\u003cli\u003eON-OFF-AUTO Contura switch with an embedded ON LED for pump status indication\u003c\/li\u003e\n\u003cli\u003eSwitch rating of 20A at 12V DC and 15A at 24V DC\u003c\/li\u003e\n\u003cli\u003eFuse holder accepts AGC and MDL glass fuses up to 20A\u003c\/li\u003e\n\u003cli\u003eWater-resistant front with a watertight mounting gasket for exposed mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-wired construction helps shorten installation time and keeps wiring work more straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe panel comes pre-wired, so the job is mainly mounting the unit, tying it into the bilge pump circuit, and fitting the correct AGC or MDL glass fuse for the load. Its compact face makes it easier to place on a helm panel, console face, or other small switch area where space is limited.\u003c\/p\u003e\u003cp\u003ePlan for about 3 in of clearance behind the mounting surface. That extra depth check is worth doing before cutting into a dash panel or replacing an older control.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is meant for one bilge pump and works on either 12V or 24V DC boats. It is a practical fit where the owner wants a dedicated switch panel instead of a loose switch and inline fuse holder, and it uses AGC and MDL glass fuses that are easy to source in many marine service setups.\u003c\/p\u003e\u003cp\u003eIt suits owners replacing an older bilge pump control panel or adding a cleaner helm control on center consoles, walkarounds, pilot houses, and similar boats where the switch area may see spray and regular use.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550360830198,"sku":"APL304392","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322643_apl304392.webp?v=1787792009"},{"product_id":"apl198714","title":"BEP Marine - Class T Fuse","description":"\u003ch4\u003eCorrosion-Resistant, Time-Delayed Protection for Marine Applications\u003c\/h4\u003e\u003cp\u003eBEP Marine Class T Fuses are designed to provide superior circuit protection in marine environments. These fuses feature a time-delay mechanism that allows temporary in-rush currents to pass without interruption while ensuring quick action against sustained overloads and short circuits. Manufactured with corrosion-resistant materials and rigorously tested twice for quality assurance, these fuses deliver reliable performance for marine electrical systems.\u003c\/p\u003e\u003ch4\u003eHigh-Performance Electrical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterrupt Capacity:\u003c\/strong\u003e 20,000A DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Voltage:\u003c\/strong\u003e 160V DC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompact and Durable Design\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.34 inches (34 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 2.77 inches (70 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSeamless Compatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with \u003cstrong\u003ePro Installer Class T Fuse Holders\u003c\/strong\u003e, ensuring a secure and efficient installation in marine electrical systems.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCorrosion-resistant construction for marine durability\u003c\/li\u003e\n\u003cli\u003eTime-delay functionality prevents unnecessary disruptions\u003c\/li\u003e\n\u003cli\u003eHigh interrupt capacity for superior circuit protection\u003c\/li\u003e\n\u003cli\u003eTested twice for maximum reliability and safety\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAvailable Variations\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-225-B:\u003c\/strong\u003e 225 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-250-B:\u003c\/strong\u003e 250 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-300-B:\u003c\/strong\u003e 300 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-350-B:\u003c\/strong\u003e 350 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-400-B:\u003c\/strong\u003e 400 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-450-B:\u003c\/strong\u003e 450 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-500-B:\u003c\/strong\u003e 500 Amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFT-600-B:\u003c\/strong\u003e 600 Amp\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdeal for protecting marine electrical circuits, BEP Marine Class T Fuses offer dependable and long-lasting performance in demanding environments.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"250 Amp","offer_id":51550362337526,"sku":"APL198714-413","price":132.13,"currency_code":"USD","in_stock":false},{"title":"300 Amp","offer_id":51550362370294,"sku":"APL198714-684","price":140.93,"currency_code":"USD","in_stock":true},{"title":"600 Amp","offer_id":51550362403062,"sku":"APL198714-799","price":293.1,"currency_code":"USD","in_stock":true},{"title":"450 Amp","offer_id":51550362435830,"sku":"APL198714-052","price":293.1,"currency_code":"USD","in_stock":true},{"title":"225 Amp","offer_id":51550362468598,"sku":"APL198714-408","price":132.13,"currency_code":"USD","in_stock":false},{"title":"400 Amp","offer_id":51550362501366,"sku":"APL198714-911","price":132.13,"currency_code":"USD","in_stock":false},{"title":"500 Amp","offer_id":51550362534134,"sku":"APL198714-042","price":293.4,"currency_code":"USD","in_stock":true},{"title":"350 Amp","offer_id":51550362566902,"sku":"APL198714-415","price":140.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0839108_apl198714.jpg?v=1787792048"},{"product_id":"apl295237","title":"Cantalupi - 500mA Output A1 Driver - 12-48V DC (CL24mini500m-1P)","description":"\u003ch4\u003eIntroducing the CL24mini500m-1P CLL Driver: Precise Control for Constant Current LED Lighting\u003c\/h4\u003e\n\u003cp\u003eUpgrade your lighting system with the CL24mini500m-1P CLL Driver and experience precise control and reliable performance for your constant current LED lighting. This state-of-the-art driver is designed to provide efficient and reliable control for constant current LED lighting systems, offering a range of unique features that set it apart from the competition.\u003c\/p\u003e\n\u003cp\u003eOperating within a wide input voltage range of 12-48V DC, the CL24mini500m-1P CLL Driver ensures compatibility with a diverse range of power sources, making it a flexible choice for residential, commercial, and industrial settings. Whether you are illuminating your home, office, or warehouse, this driver seamlessly integrates into a variety of lighting applications.\u003c\/p\u003e\n\u003cp\u003eOne of the standout features of the CL24mini500m-1P CLL Driver is its ability to deliver a precise and stable constant current output of 500mA. By maintaining a steady current flow, this driver guarantees consistent brightness and optimal performance for your LED lighting fixtures. Not only does this enhance the overall lighting experience, but it also extends the lifespan of your LEDs, allowing them to operate at their full potential.\u003c\/p\u003e\n\u003cp\u003eWhat sets the CLL driver apart is its constant current capability, eliminating the need for additional resistors or complex circuitry during installation. This feature simplifies the setup process and enhances overall efficiency, ensuring uniform illumination across your LED lighting system. Say goodbye to uneven lighting and welcome an even and pleasing lighting experience in your space.\u003c\/p\u003e\n\u003cp\u003eIn addition to its functional advantages, the CL24mini500m-1P CLL Driver boasts a compact and lightweight design, making it easy to install even in tight spaces. Its streamlined aesthetic blends seamlessly with any environment, making it an excellent choice for a wide range of applications, including architectural lighting, signage, and general illumination. Versatile and reliable, this driver is a true companion for achieving efficient and uniform illumination in any setting.\u003c\/p\u003e\n\u003cp\u003ePrioritizing safety and protection, the CL24mini500m-1P CLL Driver is equipped with built-in overcurrent and short-circuit protection features. These safeguards ensure that your LED lighting setup is shielded from potential damage, providing long-lasting performance and peace of mind. With the CL24mini500m-1P CLL Driver, you can enjoy your LED lighting system without worrying about unexpected electrical issues.\u003c\/p\u003e\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePrecise and stable constant current output of 500mA for optimal LED performance\u003c\/li\u003e\n\u003cli\u003eWide input voltage range of 12-48V DC for compatibility with diverse power sources\u003c\/li\u003e\n\u003cli\u003eEliminates the need for additional resistors or complex circuitry during installation\u003c\/li\u003e\n\u003cli\u003eCompact and lightweight design for easy installation in tight spaces\u003c\/li\u003e\n\u003cli\u003eStreamlined aesthetic suitable for various applications, including architectural lighting and signage\u003c\/li\u003e\n\u003cli\u003eBuilt-in overcurrent and short-circuit protection for enhanced safety and durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cantalupi","offers":[{"title":"Default Title","offer_id":51550366302454,"sku":"APL295237","price":85.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370658_apl295237_jpeg.jpg?v=1787792190"},{"product_id":"apl182765","title":"Vimar Eikon Socket Outlet, Italian Standard P17\/11, 2P+E, 16A, 250V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20203 SICURY P17\/11 socket outlet is a 2P+E, 16 A, 250 V flush-mounted outlet insert for Italian standard P17\/11 AC installations. It is a one-module device with a compact 22.3 x 49 x 34.5 mm body, which makes it a straightforward fit where panel space is limited and the installation uses the Eikon modular format.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matte finish, and wiring is made through screw terminals. SICURY contact protection adds an internal shutter that closes when the plug is removed. With an IP20 rating, this outlet belongs in a protected interior location such as a cabin panel, galley bulkhead, or chart table installation, not in open deck, cockpit, or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E Italian type Bipasso outlet in P17\/11 format\u003c\/li\u003e\n\u003cli\u003eRated 16 A at 250 V, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003eOne-module insert for flush-mounted Eikon installations\u003c\/li\u003e\n\u003cli\u003eScrew terminal connection for fixed wiring\u003c\/li\u003e\n\u003cli\u003eSICURY contact protection with shuttered outlet openings\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte finish\u003c\/li\u003e\n\u003cli\u003eIP20 protection for dry interior mounting points\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in four color configurations within the same Eikon 20203 family.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical format stays the same: 2P+E Italian standard P17\/11, 16 A, 250 V, 50 to 60 Hz, one module, flush mounting, screw terminals, halogen-free thermoplastic construction, IP20 protection, and 22.3 x 49 x 34.5 mm dimensions. The changes between variants are finish and, in the red version, application marking.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20203.B: Color White. This version keeps the outlet in a light Eikon palette for interiors that use white plates and trim.\u003c\/li\u003e\n\u003cli\u003eVM20203.N: Color Silver. This version uses a silver finish with a lacquered matte surface that matches Eikon Next silver hardware.\u003c\/li\u003e\n\u003cli\u003eVM20203.R: Color Red. This version is marked for dedicated supply lines, which helps separate a specific AC circuit from general-purpose outlets.\u003c\/li\u003e\n\u003cli\u003eVM20203: Color Grey. This version keeps the outlet in the darker Eikon palette and gives a lower-contrast look on dark panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and placement\u003c\/h6\u003e\u003cp\u003eCheck both the plug standard and the modular system before ordering. This insert is for Italian standard P17\/11 outlets and uses the Eikon one-module format, so it suits refits where the boat already has that layout in place.\u003c\/p\u003e\u003cp\u003eIP20 means it should stay in a protected interior space. It works for cabin, galley, chart table, and other enclosed AC points, but it is not the right choice for open cockpit panels, deck lockers, or other areas that see spray or washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550367351030,"sku":"APL182765-V7","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550367383798,"sku":"APL182765-V6","price":34.5,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550367416566,"sku":"APL182765-V5","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51550367449334,"sku":"APL182765-V9","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363536_apl182765_jpeg.jpg?v=1787792220"},{"product_id":"apl284363","title":"Blue Sea Systems Contura Switch Mounting Panel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Contura Switch Mounting Panel is a modular mounting system for fitting Blue Sea Systems Contura switches into a helm, dash, cockpit, cabin, or equipment panel. The brackets are made to build clean switch banks in different sizes, with center and end pieces for grouped installations, a single-position option for one switch, and a plug for closing an unused switch opening.\u003c\/p\u003e\u003cp\u003eThe center, end, and single mounting brackets fit six panel thicknesses: 0.06\" (1.57mm), 0.09\" (2.36mm), 0.13\" (3.17mm), 0.19\" (4.75mm), 0.25\" (6.35mm), and 0.38\" (9.52mm). That range covers many common fiberglass, aluminum, and fabricated dash panels found on recreational and work boats.\u003c\/p\u003e\u003cp\u003eThis series is useful when a boat owner, installer, or electronics technician wants a Contura switch layout that looks organized and can be expanded without replacing the entire panel face. It is a hardware mounting product, so switch electrical ratings, circuit protection, and wiring details should be matched to the specific Contura switch and circuit being installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eModular bracket format supports switch groups in different sizes, with center and end pieces used to build multi-switch layouts.\u003c\/li\u003e\n\u003cli\u003eMounting bracket options are available for single-position layouts and grouped Contura switch banks.\u003c\/li\u003e\n\u003cli\u003eCenter, end, and single brackets fit six panel thicknesses from 0.06\" (1.57mm) through 0.38\" (9.52mm).\u003c\/li\u003e\n\u003cli\u003eWorks with Blue Sea Systems Contura switch families, including common SPST, SPDT, DPST, and DPDT Contura configurations.\u003c\/li\u003e\n\u003cli\u003ePanel plug option fills an unused Contura switch mounting panel opening for a cleaner dash or switch bank.\u003c\/li\u003e\n\u003cli\u003eCompact bracket format helps keep switch additions tidy on helm panels, cabin control panels, and accessory switch locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in four configurations for building or finishing a Contura switch mounting layout.\u003c\/p\u003e\u003cp\u003eThe mounting role changes by variant. The center and end brackets are used together for grouped switch banks, the single bracket is used for one switch position, and the plug fills an unused opening in a Contura switch mounting panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8266, Type Center. This center bracket is used within a multi-switch assembly, between end brackets, when adding switch positions to a grouped Contura layout.\u003c\/li\u003e\n\u003cli\u003e8267, Type End. This end bracket finishes the outside edge of a grouped switch bank and helps define the left or right side of the assembled panel opening.\u003c\/li\u003e\n\u003cli\u003e8278, Type Plug. This plug is used with a Contura switch mounting panel when a switch opening needs to be closed rather than populated with a switch.\u003c\/li\u003e\n\u003cli\u003e8268, Type Single. This single-position bracket is used when the panel only needs one Contura switch or control in that location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore cutting or modifying a panel, confirm the selected bracket type, the number of switch positions, and the panel thickness at the mounting location. The supported thickness range is especially helpful on boats where the dash or console may include fiberglass laminate, overlay panels, or custom electrical panel faces.\u003c\/p\u003e\u003cp\u003eFor grouped layouts, the center and end pieces should be planned as a set so the finished switch bank has the correct number of positions and a clean edge on both sides. For a single accessory switch, such as a light, pump, horn, or electronics power control, the single-position bracket keeps the installation compact.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese mounting panels suit refits, helm upgrades, and accessory additions where Contura rocker switches are already being used or are being added for a new circuit. They are a practical match for small control clusters at the helm, cockpit, cabin entry, flybridge, or equipment panel where a neat switch opening matters as much as the circuit layout.\u003c\/p\u003e\u003cp\u003eThe plug option is useful during staged upgrades. An installer can leave space for a future circuit and close the unused opening until the next switch is added.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Center","offer_id":51550368071926,"sku":"APL284363-V1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Single","offer_id":51550368104694,"sku":"APL284363-V7","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Plug","offer_id":51550368137462,"sku":"APL284363-V0","price":8.99,"currency_code":"USD","in_stock":true},{"title":"End","offer_id":51550368170230,"sku":"APL284363-V6","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370807_apl284363_jpeg.jpg?v=1787792264"},{"product_id":"apl946800","title":"Vimar 3-Module Flush Mounting Box, For Masonry Walls, 20\/25 mm Knockouts, 96 x 59 x 49.8 mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar 3-module flush mounting box is a rectangular box for masonry walls with space for three device inserts in a 96 x 59 mm format. It has a 50 mm inner depth, up to 49.8 mm installation depth, and 12 inlets with break-out openings sized for 20\/25 mm conduit.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free plastic and the box can be coupled with matching accessories when several boxes need to be installed in line. It also includes a patented rack for a dividing screen and zinc-plated support screw lugs that help keep the threads clear during installation. This is the concealed box behind the finished device, not a standalone exposed enclosure.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module rectangular flush box for masonry wall installations\u003c\/li\u003e\n\u003cli\u003e96 x 59 mm body with 50 mm inner depth\u003c\/li\u003e\n\u003cli\u003e12 inlets with break-out openings for 20\/25 mm conduit\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic housing\u003c\/li\u003e\n\u003cli\u003eCouplable format for multi-box runs with matching joints\u003c\/li\u003e\n\u003cli\u003ePatented rack for fitting a dividing screen\u003c\/li\u003e\n\u003cli\u003eZinc-plated support screw lugs to help avoid thread clogging during fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations of the same 3-module flush mounting box for masonry walls.\u003c\/p\u003e\u003cp\u003eThe differences between the variants are the glow-wire rating and the box color. The masonry wall format, 3-module layout, and general installation concept remain the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMV71303: Glow Wire 650 °C, light blue. This version uses the light blue housing commonly specified for standard masonry installations.\u003c\/li\u003e\n\u003cli\u003eVMV71303.AU: Glow Wire 960 °C, black. This version keeps the same box format with a black housing and a higher glow-wire rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for flush mounting in masonry walls and for switchgear that mounts by screwing into place. It is not a hollow-wall or plasterboard box, so it suits solid-wall installations where conduit entry, internal wiring space, and a clean flush finish matter more than surface access.\u003c\/p\u003e\u003cp\u003eIt also works where separate internal compartments are needed, since a matching dividing screen can be fixed to the internal rack. Anti-mortar covers and coupling joints are available for cleaner rough-in work and for creating multi-box combinations.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe conduit entries are formed by break-out openings, including rear entry, which makes it easier to route wiring into the box from different directions during first fix. The box itself is rated IP00, so the final protection level depends on the complete assembly installed over it.\u003c\/p\u003e\u003cp\u003eThis is a practical choice for built-in electrical points in masonry utility spaces, marina service buildings, workshop walls, and other fixed installations where a Vimar 3-module flush box is required. It is less suited to lightweight interior panels, where a hollow-wall box would be the better fit.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Glow Wire 650\/Light Blue","offer_id":51550369317110,"sku":"APL946800-7","price":0.8,"currency_code":"USD","in_stock":true},{"title":"Glow Wire 960\/Black","offer_id":51550369349878,"sku":"APL946800-1","price":2.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827933_apl946800.jpg?v=1787792293"},{"product_id":"apl464294","title":"Newmar Power - Elite DC Panel","description":"\u003ch4\u003eComprehensive Power Management for Marine Applications\u003c\/h4\u003e\u003cp\u003eUpgrade your vessel's electrical system with the Newmar ES-1 Elite DC Panel. This master control panel is designed to offer large DC circuit capacity, providing you with robust and reliable power management. Whether installed alone or in conjunction with the ES-2 panel for a complete AC-DC control and monitoring system, the ES-1 Elite DC Panel ensures efficient and safe operation of your marine electrical systems.\u003c\/p\u003e\u003ch4\u003eAdvanced Features for Superior Control\u003c\/h4\u003e\u003cp\u003eThe Newmar ES-1 Elite DC Panel is packed with features that make it indispensable for marine use. Here's an overview of what makes it stand out:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog DC Volt and Ammeter\u003c\/strong\u003e: Back-illuminated with a dimmer for clear visibility and precise monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Voltage Options\u003c\/strong\u003e: Standard 12-volt operation with a 24-volt option available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive Monitoring\u003c\/strong\u003e: Includes a 4 battery bank test switch to keep track of your power sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Capacity Breaker\u003c\/strong\u003e: Equipped with a DC master breaker (100 Amp standard; 50 or 75 amp optional) for enhanced safety and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtensive Circuit Capacity\u003c\/strong\u003e: Features a 22 branch circuit capacity with 20 installed as standard, customizable with various amperage options (3-5A, 5-10A, 6-15A, 6-20A).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Benefits at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Safety\u003c\/strong\u003e: Robust DC master breaker and extensive circuit capacity ensure safe operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design\u003c\/strong\u003e: Back-illuminated meters and dimmer functionality for easy monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable\u003c\/strong\u003e: Various amperage options and voltage configurations to suit your specific needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Installation\u003c\/strong\u003e: Can be installed alone or with the ES-2 panel for a comprehensive AC-DC control system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D)\u003c\/strong\u003e: 10 x 15 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8 lbs. (3.6 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Voltage\u003c\/strong\u003e: 12V (24V optional)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eBuilt for Marine Excellence\u003c\/h4\u003e\u003cp\u003eThe Newmar ES-1 Elite DC Panel is specifically designed for marine environments, providing reliable and efficient power management to keep your vessel running smoothly. Its rugged construction and advanced features make it an essential component for any marine electrical system.\u003c\/p\u003e\u003ch4\u003eProduct Variations: Tailored Power Solutions\u003c\/h4\u003e\u003cp\u003eChoose the Newmar Elite DC Panel variant that best suits your needs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eES-1 Voltage 12V\u003c\/strong\u003e: Standard model for most marine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES-7D Voltage 24V\u003c\/strong\u003e: Higher voltage model for specialized requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConclusion\u003c\/h3\u003e\u003cp\u003eEquip your marine vessel with the Newmar ES-1 Elite DC Panel for top-tier power management and control. Its advanced features, customizable options, and robust construction make it the ideal choice for ensuring efficient and safe operation of your marine electrical systems. Select the variant that meets your needs and experience the reliability and performance that Newmar brings to your marine adventures.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"24V","offer_id":51550369579254,"sku":"APL464294-5","price":1087.0,"currency_code":"USD","in_stock":true},{"title":"12V","offer_id":51550369612022,"sku":"APL464294-1","price":2062.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717887_apl464294.jpg?v=1787792308"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-electrical-distribution.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}