{"title":"GPS \u0026 Radar","description":"","products":[{"product_id":"apl765695","title":"NAVPOD SK125 PowerPanel Stanch for overhead mounting of GP1300, GP1400, GP1500, SK125","description":"\u003cp\u003e\u003cb\u003eNAVPOD SK125 PowerPanel Stanchion Kit\u003c\/b\u003e\u003c\/p\u003e\nModel: SK125\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePowerPanel Stanchion Kit - Two 1.25\" S.S. tubes for overhead mounting of GP1300, GP1400, GP1500 or GP1600 Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SK125 Small PowerPanel Stanchion Kit is used for overhead mounting of the GP1300, GP1400 Series InstrumentPods and the GP1500, GP1600 Series SystemPods.\u003c\/p\u003e\n\u003cp\u003ePowerPanel Stanchion Kits are a very strong, sturdy, and secure way to mount electronics in the overhead area where an overhead box does not exist. The NavPod will be positioned at 40 degrees off the vertical axis. The stanchion tubes are made from mirror polished 316 grade stainless steel with 1.25\" tube diameter and 0.065\" wall thickness. There are 3 different Stanchion Kits for different size NavPods. Find the right SystemPod or SailPod for your electronics, then choose the corresponding Stanchion Kit. Each kit includes stainless steel feet and mounting hardware.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550269145334,"sku":"APL765695","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1116671_apl765695jpg.jpg?v=1787789344"},{"product_id":"apl123855","title":"Garmin ECHOMAP Ultra 2 Flush Mount Kit, Size-Specific","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin Flush Mount Kit is a size-matched mounting kit that lets a compatible ECHOMAP Ultra chartplotter sit flush in a helm panel or other flat surface. It is offered for 10-inch, 12-inch, and 16-inch displays, with the cutout and hardware matched to the screen size so the unit sits cleanly in the dash instead of on a bracket.\u003c\/p\u003e\u003cp\u003eFlush mounting is a good fit for center consoles, pilothouses, and electronics boxes where you want a low-profile face that is easier to wipe down and less likely to get bumped by knees, rods, or lines. Plan your install with enough clearance behind the panel for cable bends and service access before cutting the opening.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount style install for compatible Garmin ECHOMAP Ultra chartplotters on most flat boat surfaces\u003c\/li\u003e\n\u003cli\u003eSize-specific options for 10-inch, 12-inch, and 16-inch displays so the cutout and face fit the unit frame\u003c\/li\u003e\n\u003cli\u003eIncludes a cutout template to help lay out the opening before you drill and cut\u003c\/li\u003e\n\u003cli\u003eMounting hardware is included for securing the chartplotter to the panel\u003c\/li\u003e\n\u003cli\u003eWorks well in tight helm layouts where a bracket mount would protrude into the cockpit or walkway\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple sizes to match different ECHOMAP Ultra display formats.\u003c\/p\u003e\u003cp\u003eThe screen size is what changes between versions, along with the matching panel cutout and mounting layout. Hardware, installation instructions, and a template are included with each size kit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-12841-03: Size 10-inch. Used for ECHOMAP Ultra 102sv\/106sv and ECHOMAP Ultra 2 10-inch chartplotters, with the cutout and fasteners sized for that frame.\u003c\/li\u003e\n\u003cli\u003e010-12842-03: Size 12-inch. Used for ECHOMAP Ultra 122sv\/126sv and ECHOMAP Ultra 2 12-inch chartplotters, with the cutout and mounting layout matched to the 12-inch face.\u003c\/li\u003e\n\u003cli\u003e010-13352-13: Size 16-inch. Used for ECHOMAP Ultra 2 16-inch chartplotters, with the panel opening and mount pattern matched to the larger chassis.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003cli\u003eMounting template\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eStart by choosing a flat mounting area with enough room behind the panel for connectors and cable routing. Use the included template to mark the cutout and fastener locations, then drill pilot holes and cut the opening carefully.\u003c\/p\u003e\u003cp\u003eOn cored fiberglass panels, sealing the raw cut edges helps keep moisture out of the laminate. After the unit is seated and fastened, confirm the display face sits evenly against the panel and that the keypad and card access (if applicable) remain usable.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is determined by the chartplotter screen size and model family, not just the diagonal measurement you prefer at the helm. Match the kit size to your ECHOMAP Ultra unit: 10-inch kits cover 102sv and 106sv formats, 12-inch kits cover 122sv and 126sv formats, and the 16-inch kit is for ECHOMAP Ultra 2 16-inch units.\u003c\/p\u003e\u003cp\u003eThis kit is a good match for boaters who already know where they want the chartplotter mounted and need a clean, flush install in a dash, helm pod, or electronics enclosure.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12\"","offer_id":51550279631094,"sku":"APL123855-V2","price":24.99,"currency_code":"USD","in_stock":false},{"title":"10\"","offer_id":51550279663862,"sku":"APL123855-V1","price":24.99,"currency_code":"USD","in_stock":false},{"title":"16\"","offer_id":51550279696630,"sku":"APL123855-V3","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281806_apl123855.webp?v=1787789614"},{"product_id":"apl701237","title":"Raymarine Trunnion Bracket Kit, For es9 and Axiom Pro 9","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine R70384 is a trunnion bracket kit for mounting compatible Raymarine eS9 and Axiom Pro 9 displays on a boat console, dash, helm pod, or other suitable flat surface.\u003c\/p\u003e\u003cp\u003eThis kit is used when a bracket-style installation is preferred over a flush or surface-mount cutout. A trunnion mount lets the display sit proud of the mounting surface, which is useful at helm stations where access, viewing angle, and serviceability matter.\u003c\/p\u003e\u003cp\u003eThe kit includes the main mounting hardware for securing the display to the bracket, including the bracket, knobs, and back plate. Mounting screws for the boat structure should be matched to the material and thickness of the chosen location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Raymarine eS9 and Axiom Pro 9 displays for bracket-mounted installations.\u003c\/li\u003e\n\u003cli\u003eSupports upright helm mounting where the display needs to remain accessible for cable routing and service.\u003c\/li\u003e\n\u003cli\u003eTrunnion-style setup allows the display angle to be adjusted after installation.\u003c\/li\u003e\n\u003cli\u003eUseful replacement kit when the original bracket hardware is missing, damaged, or being moved to a new helm location.\u003c\/li\u003e\n\u003cli\u003eIncludes the bracket, knobs, and back plate needed to secure the display to the trunnion assembly.\u003c\/li\u003e\n\u003cli\u003eSuited for marine dash, console, and electronics pod installations where vibration and vessel motion make secure mounting important.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore drilling, confirm the display model and check that the mounting surface has enough strength and clearance for the display, bracket, cables, and the full range of angle adjustment. The area behind the mounting surface should also be checked so fasteners do not interfere with wiring, structure, or other equipment.\u003c\/p\u003e\u003cp\u003eThe bracket can be used as a drilling template once the final position is confirmed. For best results, use fasteners suited to the mounting surface, and tighten the trunnion knobs by hand until the display is secure enough to stay in position while the vessel is underway.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a practical match for helm refits, electronics upgrades, or replacement installations where an eS9 or Axiom Pro 9 display needs a clean bracket mount without cutting a flush-mount opening. It is especially useful on center consoles, pilothouse helms, flybridges, and secondary stations where the display position may need to be adjusted for visibility.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTrunnion bracket\u003c\/li\u003e\n\u003cli\u003eTrunnion knobs\u003c\/li\u003e\n\u003cli\u003eBack plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":51550280843510,"sku":"APL701237","price":179.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1111783_apl701237jpg.jpg?v=1787789647"},{"product_id":"apl161350","title":"Furuno - FCV588 8.4\" Fishfinder with RezBoost","description":"\u003ch4\u003eDive into Clarity: Furuno FCV588 8.4\" Fishfinder\u003c\/h4\u003e\n\u003cp\u003eDiscover the depths like never before with the FCV588 - an 8.4\" dual-frequency fishfinder. Incorporating the game-changing RezBoostT signal processing technology, this piece of marine magic doesn't just show you what's beneath your boat — it redefines clarity, taking your fishing and underwater exploration to a whole new level.\u003c\/p\u003e\n\u003ch4\u003eTechnical Marvels Beneath the Surface\u003c\/h4\u003e\n\u003cp\u003eAt the heart of the FCV588 lies a sophisticated narrowband transducer working harmoniously with RezBoostT. The outcome? Up to 8x improved resolution and target separation. To complement this, it boasts a rapid transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute at a 5 m depth range, offering unparalleled target separation and clarity.\u003c\/p\u003e\n\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\n\u003cp\u003eGeneral dimensions for the FCV588 are yet to be provided.\u003c\/p\u003e\n\u003ch4\u003eThe Art of Fish and Bottom Reading\u003c\/h4\u003e\n\u003cp\u003eNot just content with clarity, the FCV588 arms you with the White Line feature, a master at discerning fish near the bottom. The distinct white line illustrates the top edge of the bottom echo, making it easier to spot bottom structures and differentiate between underwater flora and fauna.\u003c\/p\u003e\n\u003ch4\u003eMore than Just a Fish Finder\u003c\/h4\u003e\n\u003cp\u003eExclusive to Furuno Fish Finders, the FCV588 introduces ACCU-FISHT, an avant-garde fish size analyzer. With ACCU-FISHT, each fish echo on your screen can display the actual fish size or, if you prefer, the exact depth where the fish is swimming. Further enriching your fishing experience is the Bottom Discrimination feature. Offering quick recognition of the sea bed composition, whether it's rocks, sand, gravel, or mud, you're always in the know.\u003c\/p\u003e\n\u003ch4\u003eSmart Alarms and Connectivity\u003c\/h4\u003e\n\u003cp\u003eStaying alert becomes second nature with the FCV588's configurable alarm function, ensuring you never miss depth changes or fish echoes. Plus, with Furuno's TLL (Target Lat\/Lon) output, interfacing with your Furuno Chart Plotter becomes a breeze. Mark fishing hotspots with crucial info ranging from L\/L, Depth, to Water Temp, Fish size, and even Bottom type.\u003c\/p\u003e\n\u003ch4\u003eHighlights to Remember\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRevolutionary RezBoostT technology enhancing resolution.\u003c\/li\u003e\n\u003cli\u003eUnique ACCU-FISHT fish size analyzer.\u003c\/li\u003e\n\u003cli\u003eAdvanced Bottom Discrimination for rapid seabed composition recognition.\u003c\/li\u003e\n\u003cli\u003eConfigurable Alarms for depth, fish echoes, and more.\u003c\/li\u003e\n\u003cli\u003eFuruno's exclusive TLL output for seamless data sharing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550280974582,"sku":"APL161350","price":1345.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696821_apl161350_jpeg.jpg?v=1787789652"},{"product_id":"apl652411","title":"Garmin MotorGuide Trolling Motor Transducer Adapter Cable, 4-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11979-00 is an adapter cable that connects a MotorGuide trolling motor transducer to a compatible Garmin fishfinder or chartplotter that uses a 4-pin transducer port. It is used when your transducer is mounted in or on the trolling motor and you want that sonar feed to appear on the Garmin display without cutting or splicing wiring.\u003c\/p\u003e\u003cp\u003eThis cable is the correct fit for Garmin units that use the 4-pin transducer connector, including families such as echo, ECHOMAP CHIRP 4x and 5x, ECHOMAP Plus 4x and 6x, ECHOMAP UHD 6x, STRIKER, STRIKER Plus, and STRIKER Vivid. On the trolling motor side, it mates to MotorGuide setups that use the MotorGuide transducer connection commonly found on sonar-equipped models.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects a MotorGuide trolling motor transducer to a Garmin 4-pin transducer port\u003c\/li\u003e\n\u003cli\u003eSupports Garmin fishfinders and chartplotters that use the 4-pin transducer connector\u003c\/li\u003e\n\u003cli\u003eUseful for keeping sonar on the trolling motor transducer while running a Garmin display at the console or bow\u003c\/li\u003e\n\u003cli\u003eAdapter-style cable for a clean install without modifying factory plugs\u003c\/li\u003e\n\u003cli\u003eCommonly used with sonar-equipped MotorGuide trolling motors such as Tour, Wireless Sonar, and Xi5 configurations that use the MotorGuide transducer connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector on the back of your Garmin unit before ordering. This adapter is for Garmin devices with a 4-pin transducer port, not 8-pin or 12-pin transducer ports. On the MotorGuide side, confirm that your trolling motor transducer lead uses the MotorGuide plug style intended for fishfinder integration.\u003c\/p\u003e\u003cp\u003eIf your boat has both a transom transducer and a trolling motor transducer, this adapter is typically used to bring the trolling motor transducer into the Garmin unit when you are fishing from the bow and want the sonar to track with the motor direction.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward: connect the MotorGuide transducer lead to the adapter, then connect the Garmin end to the unit’s 4-pin transducer port. Route the cable so it will not be pinched during stow and deploy, and leave enough slack for steering movement at the trolling motor head.\u003c\/p\u003e\u003cp\u003eFor clean sonar performance, keep the transducer cable run separated from high-current trolling motor power wiring when possible. Secure the cable with gentle strain relief and allow a drip loop near connections to reduce water migration into plugs during spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for anglers running a Garmin display at the bow and a MotorGuide trolling motor with an integrated or trolling-motor-mounted transducer. It is also helpful on smaller fishing boats where you want to keep the install tidy and avoid changing out transducers just to match connector styles.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550282154230,"sku":"APL652411","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694277_apl652411_jpeg.jpg?v=1787789680"},{"product_id":"apl581736","title":"Navpod GP2040-25 SystemPod for Humminbird HELIX 10\/9 GP2040-25","description":"\u003cp\u003e\u003cb\u003eNAVGP204025 SystemPod\u003c\/b\u003e\u003c\/p\u003e\nModel: GP2040-25\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSystemPod Pre-Cut for Humminbird HELIX 10 \u0026amp; HELIX 9 Series, for 12\" wide guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. \"Where you need it?when you need it\". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.\u003c\/p\u003e\n\u003cp\u003eA SystemPod is best mounted on a Single Bend AngleGuard.\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eOverall\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e20.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eUsable Face\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7.375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eMax Cutout\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550285889782,"sku":"APL581736","price":459.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109462_apl575525jpg.jpg?v=1787789714"},{"product_id":"apl070752","title":"Ancor 270010 NMEA 2000 Backbone Cable - 10m 270010","description":"\u003cp\u003e\u003cb\u003eAncor NMEA 2000 Backbone Cable - 10M\u003c\/b\u003e\u003c\/p\u003e\nModel: 270010\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eColor coded for easy installation and component identification\u003c\/li\u003e\n\u003cli\u003eLarge 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eBox Dimensions\u003c\/td\u003e\n\u003ctd\u003e3\"H x 9\"W x 10\"L WT: 2.8 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e091887982251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Ancor","offers":[{"title":"Default Title","offer_id":51550286217462,"sku":"APL070752","price":98.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1092699_apl070752jpg.jpg?v=1787789729"},{"product_id":"apl739279","title":"Garmin GPSMAP 943 GN+ Chartplotter, Non-Sonar, 9 in Touchscreen, US\/Canada Navionics+ Charts, 10 Hz GNSS, NMEA 2000, NMEA 0183, Wi-Fi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02366-60 is a 9-inch GPS chartplotter with built-in Garmin Navionics+ mapping and a 1280 x 720 touchscreen display. It uses a 10 Hz GNSS receiver (GPS, GLONASS, and Galileo) so position and course data stay smooth when you are threading channels or running offshore in a chop.\u003c\/p\u003e\u003cp\u003ePower is 10 to 32 Vdc with a 6 A fast-acting fuse, and typical draw is about 1.34 A at 12 Vdc. The unit is rated IPX7 and its case combines polycarbonate plastic with die-cast aluminum. Physical size is 233.0 x 162.3 x 75.8 mm (9 3\/16 x 6 3\/8 x 3 in.).\u003c\/p\u003e\u003cp\u003eThis is a non-sonar chartplotter. If you want sonar views, it supports compatible external sonar black boxes and transducers, and it can be built into a helm system with other compatible networked electronics.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e9-inch touchscreen with 1280 x 720 resolution for clear chart detail and readable split screens\u003c\/li\u003e\n\u003cli\u003ePreloaded Garmin Navionics+ charts for U.S. and Canada coverage, including Auto Guidance+ route suggestions and a 1-year subscription for downloadable daily updates through the ActiveCaptain app\u003c\/li\u003e\n\u003cli\u003e10 Hz GNSS positioning (GPS, GLONASS, and Galileo) for fast updates while underway\u003c\/li\u003e\n\u003cli\u003eNetworking support for NMEA 2000, NMEA 0183, J1939 engine data, Garmin Marine Network, and Wi-Fi\u003c\/li\u003e\n\u003cli\u003eRuns on 10 to 32 Vdc with a 6 A fast-acting fuse; typical draw is about 1.34 A at 12 Vdc\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating; temperature range from -15 to 55 C (5 to 131 F)\u003c\/li\u003e\n\u003cli\u003eTwo microSD card slots (up to 32 GB each) for charts, updates, and saved data\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGPSMAP 943 GN+ chartplotter\u003c\/li\u003e\n\u003cli\u003emicroSD card (preinstalled)\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 drop cable\u003c\/li\u003e\n\u003cli\u003eBail mount with knobs\u003c\/li\u003e\n\u003cli\u003eFlush mount kit with gasket\u003c\/li\u003e\n\u003cli\u003eProtective cover\u003c\/li\u003e\n\u003cli\u003eTrim piece snap covers\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe unit supports bail mounting, flush mounting, or flat mounting, which helps when you are replacing an older display and trying to match an existing cutout or bracket. Leave space behind the unit for connector depth and cable bend radius, and keep the microSD slots in mind if you will not have easy access after a flush install.\u003c\/p\u003e\u003cp\u003eUse marine sealant around the cutout to keep water from migrating behind the dash, and keep the weather caps on any unused ports to slow down corrosion in damp consoles. Compass-safe distance is 30 cm, which matters when the magnetic compass is close to the helm pod.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eNMEA 2000 is supported for sharing navigation and sensor data, but the display is not powered through the NMEA 2000 backbone. Connect it to a dedicated 10 to 32 Vdc supply using the power harness; NMEA 2000 draw is 75 mA max (LEN 2).\u003c\/p\u003e\u003cp\u003eFor older devices, the NMEA 0183 port provides one differential input and one differential output. For engine gateways and compatible engines, the J1939 port supports engine data, and the connection is typically made with an accessory cable intended for the marine environment.\u003c\/p\u003e\u003ch6\u003eOn-board fit and use\u003c\/h6\u003e\u003cp\u003eThis model makes sense on center consoles, express cruisers, and sportfish boats where a chartplotter needs to act as the hub for charts and networked data at the helm. It is also a good match when you want built-in Navionics+ mapping now, with room to expand later with compatible radar, autopilot, AIS, cameras, and other helm add-ons.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550286577910,"sku":"APL739279","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696187_apl739279_jpeg.jpg?v=1787789728"},{"product_id":"apl237123","title":"Hydro Glow - CORD50 50' Extension Cord f\/SF Series","description":"\u003ch4\u003eDive Deeper with CORD50: Extend your Range\u003c\/h4\u003e\n\u003cp\u003eThe CORD50 is an impeccable solution by Hydro Glow tailored especially for SF Series users. If you’ve been yearning for that extra stretch in your marine adventures, this extension cord gives you an additional 50 feet of freedom.\u003c\/p\u003e\n\u003ch4\u003eUnveiling the Craftsmanship\u003c\/h4\u003e\n\u003cp\u003eHydro Glow, renowned for its quality and reliability, ensures that the CORD50 is crafted to perfection. Specially designed for the SF Series, it guarantees a seamless fit and optimal performance.\u003c\/p\u003e\n\u003ch4\u003eFeatures that Shine\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect integration with SF Series\u003c\/li\u003e\n\u003cli\u003e50 feet of added flexibility\u003c\/li\u003e\n\u003cli\u003eDurable design for extended lifespan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hydro Glow","offers":[{"title":"Default Title","offer_id":51550287757558,"sku":"APL237123","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697811_apl237123_jpeg.jpg?v=1787789807"},{"product_id":"apl227334","title":"NavPod - SailPod Pre-Cut - For Garmin GPSMAP 1042xsv, 1022xsv, 1022, For 9.5\" Wide Guard","description":"\u003ch4\u003eMaster Your Marine Navigation: NavPod SailPod for Garmin GPSMAP Series\u003c\/h4\u003e\n\u003cp\u003eIntroducing the NavPod SailPod Pre-Cut for Garmin GPSMAP® 1042xsv, 1022xsv \u0026amp; 1022, designed to revolutionize the way you navigate. Perfect for sailors who demand precision and reliability, the SailPod ensures your Garmin Radar or Chartplotter is mounted at the helm for easy operation and clear visibility. With its high gloss finish, the SailPod not only provides a sleek, clean mounting solution but also conceals unsightly wires, enhancing the aesthetic of your helm. The nickel chrome-plated tamper-resistant screws add a touch of elegance while securing your electronics against potential theft. Engineered for the harsh marine environment, the SailPod features a double gasket waterproof seal, guaranteeing the protection of your marine electronics against wet offshore conditions. Optimally mounted on a Single Bend AngleGuard, the SailPod is the smart choice for any sailor looking to upgrade their navigation system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-cut specifically for Garmin GPSMAP® 1042xsv, 1022xsv \u0026amp; 1022\u003c\/li\u003e\n\u003cli\u003eHigh gloss finish for a sleek and clean look\u003c\/li\u003e\n\u003cli\u003eDouble gasket system for an excellent watertight seal\u003c\/li\u003e\n\u003cli\u003eThicker gauge acrylic capped ABS material for enhanced durability\u003c\/li\u003e\n\u003cli\u003eNickel chrome-plated tamper-resistant screws for added security\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand the harshest wet offshore boating conditions\u003c\/li\u003e\n\u003cli\u003e10-year warranty, highlighting NavPod's commitment to quality\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEnhanced Durability and Protection\u003c\/h4\u003e\n\u003cp\u003eThe Gen3 enhancements of the SailPod include a thicker gauge acrylic capped ABS material that not only improves strength but also provides better structural rigidity. This design minimizes flexing when tightening and ensures a uniform pressure on the seal, enhancing the waterproofing capabilities. The combination of a thicker external silicone gasket and a 50% thicker internal Poron Microcell Polyurethane gasket ensures that your electronics are protected from moisture, even in the future when servicing is required.\u003c\/p\u003e\n\u003ch4\u003eSeamless Integration and Security\u003c\/h4\u003e\n\u003cp\u003eThe SailPod is engineered to seamlessly integrate with your Garmin GPSMAP® devices, providing a secure and visually appealing setup. The use of all 316 stainless steel hardware, including large round-head tamper-resistant screws, ensures your devices are securely mounted and protected from the elements, adding a level of security that is both functional and stylish.\u003c\/p\u003e\n\u003cp\u003eWith the NavPod SailPod for Garmin GPSMAP® series, navigating the waters becomes a breeze. Its robust construction, waterproof seal, and stylish design make it the ideal choice for sailors who refuse to compromise on quality and reliability. Elevate your sailing experience with this indispensable addition to your helm.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550292214006,"sku":"APL227334","price":439.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708641_apl227334.jpg?v=1787789981"},{"product_id":"apl636338","title":"Garmin - Power Cable - 8-Pin, for echoMAP Series \u0026 GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11970-00 is an 8-pin power\/data cable that connects select echoMAP and GPSMAP chartplotters to DC power and to NMEA 0183 wiring.\u003c\/p\u003e\u003cp\u003eAt 6 ft (about 1.8 m) long, it has an 8-pin plug on the display end and bare wire leads on the other end for a clean hardwired install behind the helm or at a nav station. Along with power, the lead set supports NMEA 0183 input and output and can be used to trigger a lamp or horn for visible or audible alerts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-foot (about 1.8 m) cable for typical helm runs\u003c\/li\u003e\n\u003cli\u003e8-pin connector to bare wire leads for straightforward hardwiring\u003c\/li\u003e\n\u003cli\u003eCarries power and NMEA 0183 input\/output on one harness\u003c\/li\u003e\n\u003cli\u003eSupports connection to an external lamp or horn for chartplotter alerts\u003c\/li\u003e\n\u003cli\u003eHelpful when replacing a display and keeping existing NMEA 0183 wiring in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used on chartplotters with the Garmin 8-pin power\/data port. Confirm the port style on the back of your display before ordering.\u003c\/p\u003e\u003cp\u003eCompatible models include echoMAP 50dv, echoMAP 50s, echoMAP 70dv, echoMAP 70s, GPSMAP 527xs, GPSMAP 547, GPSMAP 547xs, GPSMAP 741, and GPSMAP 741xs. It is not compatible with echoMAP CHIRP versions.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect the power leads to a clean, properly fused DC feed and keep the run as short as practical to limit voltage drop. For longer runs, extend using marine-grade wire sized for the distance and the current draw of your chartplotter.\u003c\/p\u003e\u003cp\u003eThe NMEA 0183 conductors can be tied into other NMEA 0183 equipment such as a VHF radio or AIS device when your wiring plan calls for it. Match talker and listener connections carefully and keep splices supported and dry inside the console.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with strain relief at the display, avoid sharp bends, and keep it separated from ignition wiring, high-current battery cables, and sources of heat. Leave a small service loop so the unit can be pulled forward for future access.\u003c\/p\u003e\u003cp\u003eTerminate bare leads with adhesive-lined heat-shrink connectors and mount any splices where they will not sit in water or collect condensation. On open boats, protect the harness with loom or conduit where it passes through bulkheads and fiberglass.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis harness fits common installs at the helm, refits where you are keeping an existing NMEA 0183 network, and setups that use an external alarm indicator that can be seen or heard on deck.\u003c\/p\u003e\u003cp\u003eIt suits boaters who want a direct hardwired power connection and still need NMEA 0183 data wiring and alert wiring without adding separate adapters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, inspect the plug and terminations for corrosion and for chafe where the harness is tied into the boat. Re-seat the connector if you notice intermittent power or data issues, and replace any terminals that show corrosion inside the crimp.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550294704374,"sku":"APL636338","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694273_apl636338_jpeg.jpg?v=1787790016"},{"product_id":"apl058984","title":"Simrad HALO Radar Dome Antenna, 20 in, Pulse Compression, 10 m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad HALO20 radar dome is a 20-inch pulse compression radar offered in HALO20 and HALO20+ configurations, supplied as a dome scanner kit with a 10 m cable. Both options run on 12\/24 V systems (10.5 to 31.2 VDC) and are rated IPX6 for real-world spray and washdowns on deck.\u003c\/p\u003e\u003cp\u003eThis is the style of radar many owners choose when they want solid short-to-mid range awareness without moving up to a larger open array. Dual Range lets you watch close-in targets while keeping a longer-range view up for weather or traffic, and MARPA tracking helps keep tabs on selected contacts when you are working through busy channels or limited visibility.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e20-inch radome footprint (510 mm diameter, 223 mm high) that fits common hardtop, arch, and mast mounting locations\u003c\/li\u003e\n\u003cli\u003ePulse compression radar technology in both variants, with Dual Range capability\u003c\/li\u003e\n\u003cli\u003eMaximum range depends on variant: up to 24 NM (HALO20) or up to 36 NM (HALO20+)\u003c\/li\u003e\n\u003cli\u003e12\/24 V compatible supply (10.5 to 31.2 VDC) with a recommended 5 A fuse\u003c\/li\u003e\n\u003cli\u003eIPX6 water resistance for exposed mounting positions and routine washdowns\u003c\/li\u003e\n\u003cli\u003eInstant wake from low-power standby for quick use after leaving the dock or when conditions change\u003c\/li\u003e\n\u003cli\u003eMARPA target tracking supports up to 10 targets (up to 20 in Dual Range)\u003c\/li\u003e\n\u003cli\u003eHALO20+ includes VelocityTrack Doppler and supports up to 60 RPM rotation at ranges up to 1.5 NM for faster close-range updates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that share the same 20-inch dome format and core radar features.\u003c\/p\u003e\u003cp\u003eThe main differences are maximum range and close-range behavior: HALO20 runs out to 24 NM, while HALO20+ extends to 36 NM and adds VelocityTrack Doppler with range-dependent rotation up to 60 RPM for near-instant updates at close ranges. Both support Dual Range, MARPA tracking, 12\/24 V power (10.5 to 31.2 VDC), and an IPX6-rated housing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e000-14536-001: Type HALO20+. Up to 36 NM maximum range with VelocityTrack Doppler and rotation up to 60 RPM at ranges up to 1.5 NM, which is useful when you want rapid target updates in tight traffic.\u003c\/li\u003e\n\u003cli\u003e000-14537-001: Type HALO20. Up to 24 NM maximum range with 24 RPM rotation, a straightforward option for coastal navigation, harbor work, and routine visibility support.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e20-inch radar dome scanner\u003c\/li\u003e\n\u003cli\u003e10 m cable for HALO dome radar\u003c\/li\u003e\n\u003cli\u003eEthernet adapter cable (RJ45 to 5-pin, 1.5 m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mount so the dome has a clear view around the boat and sits as level as practical at the normal running trim. Avoid placing it directly behind tall rails, thick canvas, or other antennas that can shadow targets, and leave room to route the cable without tight bends or chafe points.\u003c\/p\u003e\u003cp\u003eOn smaller boats, the dome commonly goes on a hardtop, radar arch, or a mast bracket. On sailboats, pay attention to rigging and spreaders that can block sectors, and keep the scanner far enough from crew areas that you are not running it continuously right at head height.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower the radar from a clean 12\/24 V source (10.5 to 31.2 VDC) and protect the feed with the recommended 5 A fuse. Maximum draw is 20 W for HALO20 and 29 W for HALO20+, with typical consumption around 18 W and 20 W respectively, so most boats can support it without heavy-gauge runs, but a dedicated breaker makes troubleshooting easier.\u003c\/p\u003e\u003cp\u003eRadar display and control are handled through compatible Simrad multifunction displays. Confirm your MFD supports HALO dome radars and has an available Ethernet connection path before purchase, especially if you are integrating into an older networked setup.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis dome radar is a good match for skippers who do early-morning departures, run in haze or rain, or routinely work around traffic where quick target separation matters. The HALO20+ variant leans toward situations where you want faster close-range refresh and Doppler target cues, while HALO20 covers the same form factor with a shorter maximum range.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off the radome and mounting hardware with fresh water, and avoid abrasive pads or harsh solvents on the dome surface. Periodically check fasteners, cable glands, and the cable run for chafe so vibration and UV exposure do not create an intermittent connection later in the season.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"HALO20+","offer_id":51550296342774,"sku":"APL058984-V6","price":2549.99,"currency_code":"USD","in_stock":true},{"title":"HALO20","offer_id":51550296375542,"sku":"APL058984-V3","price":2049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1282588_apl058984.jpg?v=1787790110"},{"product_id":"apl905581","title":"SI-TEX - T2010A 10.4\" Color Radar - With 12Kw 6' Open Array","description":"\u003ch4\u003eHigh-Performance Radar with Superior Detection Capabilities\u003c\/h4\u003e\u003cp\u003eThe Si-Tex T2010A-6 is a powerful 10.4\" color radar system designed to provide precise target detection and enhanced situational awareness for marine operations. Equipped with a 12kW open array radar and a 6.5' antenna, this system delivers exceptional performance, making it ideal for high-speed navigation, river operations, and offshore applications. With its dual-speed antenna and advanced display capabilities, the T2010A-6 ensures superior accuracy in identifying long- and short-range targets simultaneously.\u003c\/p\u003e\u003ch4\u003eCutting-Edge Features for Reliable Performance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Speed Antenna:\u003c\/strong\u003e 48-rpm capability optimizes target tracking for high-speed and river navigation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit-Screen Display:\u003c\/strong\u003e Simultaneously view both long-range and short-range targets for comprehensive situational awareness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue-Trail Function:\u003c\/strong\u003e Easily identify moving targets, improving navigational safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Processing Functions:\u003c\/strong\u003e Includes Interference Rejection, Target Expansion, Parallel Index, and True\/Relative Bearing for precise target identification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIS Interface Module:\u003c\/strong\u003e Standard module capable of tracking up to 200 targets, ensuring seamless integration with vessel tracking systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Automatic Tracking Aid (ATA):\u003c\/strong\u003e Enhances target tracking with up to 50 automated targets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScanner Type:\u003c\/strong\u003e 6.5' Open Array\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeak Power Output:\u003c\/strong\u003e 12kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Frequency:\u003c\/strong\u003e 9410 ± 30MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Width:\u003c\/strong\u003e 1.2° Horizontal, 22° Vertical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Rotation Speeds:\u003c\/strong\u003e 24 or 48 RPM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulse Widths:\u003c\/strong\u003e 0.08, 0.15, 0.3, 0.5, 1 µs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIF Frequency:\u003c\/strong\u003e 60MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange Accuracy:\u003c\/strong\u003e Better than 8m or 1% of selected range scale\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Detecting Distance:\u003c\/strong\u003e 25m\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHigh-Resolution Display for Clear Visualization\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Type:\u003c\/strong\u003e 10.4\" TFT Color LCD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution:\u003c\/strong\u003e 480 x 640 pixels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay Modes:\u003c\/strong\u003e Heads Up, North Up*, Course Up*, WPT Up**\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 10.8 - 31.2V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 130 watts or less\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eDisplay Unit Dimensions:\u003c\/strong\u003e 12 19\/32\" x 12 19\/32\" x 5 39\/64\"\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eIncluded Components\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMRD-104 Display\u003c\/li\u003e\n\u003cli\u003eRB718A - Pedestal 12kW\u003c\/li\u003e\n\u003cli\u003eRW701A-06 - 6.5' Antenna\u003c\/li\u003e\n\u003cli\u003e15M Cable (242J159098A)\u003c\/li\u003e\n\u003cli\u003eDC Power Cable\u003c\/li\u003e\n\u003cli\u003eQuick Reference Guide\u003c\/li\u003e\n\u003cli\u003eOperation Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Si-Tex T2010A-6 delivers precise radar imaging, advanced tracking functions, and seamless integration with marine navigation systems, making it an excellent choice for professional and recreational marine applications.\u003c\/p\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":51550298570998,"sku":"APL905581","price":9999.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0837620_apl240961.jpg?v=1787790249"},{"product_id":"apl674903","title":"NavPod - RMX4900-01 RailMount Pre-Cut - For Raymarine eS97, eS98","description":"\u003ch4\u003eOptimized Navigation at Sea: NavPod RMX4900-01 RailMount for Raymarine eS97\/eS98\u003c\/h4\u003e\n\u003cp\u003eEnhance your maritime navigation with the NavPod RMX4900-01 RailMount, the premier mounting solution designed exclusively for the Raymarine eS97 and eS98. Embrace the fusion of sleek design and functional excellence as you securely attach your autopilot control, sailing instrument, or chartplotter onto an existing pedestal guard. Suitable for any 1\" or 1.25\" diameter tube, the RMX4900-01 features a Chromed Stainless Steel arm, offering 180-degree rotation for optimal viewing. Engineered for durability and aesthetics, this RailMount ensures your electronics are protected and perfectly positioned, come rain or shine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically pre-cut for Raymarine eS97 and eS98 for a seamless integration.\u003c\/li\u003e\n\u003cli\u003eConstructed from a high-gloss, UV resistant, acrylic capped ABS material to match the sophistication of gel-coated fiberglass.\u003c\/li\u003e\n\u003cli\u003eDouble gasket system guarantees a superior watertight seal, safeguarding your electronics against the harshest marine conditions.\u003c\/li\u003e\n\u003cli\u003eNickel chrome-plated stainless steel tamperproof screws for enhanced security and a touch of elegance.\u003c\/li\u003e\n\u003cli\u003eAdvanced thermoforming process ensures improved strength and structural rigidity.\u003c\/li\u003e\n\u003cli\u003eBacked by a 10-year warranty, affirming our commitment to unparalleled quality and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Excellence for Marine Adventures\u003c\/h4\u003e\n\u003cp\u003eThe NavPod RMX4900-01 RailMount is a testament to our commitment to quality and innovation. With a design process that leverages state-of-the-art CAD programs and CNC machining centers, we ensure precision, durability, and compatibility. This RailMount is not just a product; it's a reliable partner for your maritime journeys, offering peace of mind with its robust construction and thoughtful design.\u003c\/p\u003e\n\u003ch4\u003eDesign That Complements Your Vessel\u003c\/h4\u003e\n\u003cp\u003eThe sleek and stylish design of the RMX4900-01 RailMount complements the aesthetic of any vessel. Its high-gloss finish and elegant contours enhance the look of your helm, while its functional design ensures easy access to your navigation tools. Whether you're navigating through storms or enjoying a peaceful day on the water, this RailMount provides the perfect blend of style and practicality.\u003c\/p\u003e\n\u003ch4\u003eCommitment to Quality and Innovation\u003c\/h4\u003e\n\u003cp\u003eWith over two decades of experience in crafting marine electronics housing, our dedication to producing the best possible waterproof solutions is unwavering. The RMX4900-01 RailMount embodies this commitment, offering not just a product, but a promise of quality, reliability, and innovation. Choose the NavPod RMX4900-01 for your Raymarine eS97 and eS98, and experience the difference that comes with a decade-long warranty and the assurance of a long-lasting high gloss finish.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550298603766,"sku":"APL674903","price":599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708367_apl370291.jpg?v=1787790251"},{"product_id":"apl727416","title":"Scanstrut Arm Mounted Pod Compact - Up to 8\" Displays SPR-8-AM","description":"\u003cp\u003e\u003cstrong\u003eArm Mounted Pod Compact - Up to 8\" Displays\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned with the latest generation screens in mind, it is as low profile as it can get. Achieve a neat and streamlined look overall, perfect for installations where there is limited space available.\u003c\/p\u003e\n\u003cp\u003eSolve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.\u003c\/p\u003e\n\u003cp\u003eFor Displays \u0026amp; Standard Instruments\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncreased Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePod seal is manufactured from a high tear strength silicone; it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupplied Uncut\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Fitting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFits pedestal rails from 25mm to 33.7mm (0.98” to 1.33”). Fit your display onto standard and curved rails.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreat Viewing Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eViewing angle can be set upon installation. Cables are routed internally through the clamp and onto the rail.\u003c\/p\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":51550298636534,"sku":"APL727416","price":695.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1114651_apl727416jpg.jpg?v=1787790257"},{"product_id":"apl948605","title":"Raymarine SeaTalk NG Backbone Cable, NMEA 2000, 5-Pin to 5-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine SeaTalk NG Backbone Cable is the main trunk cable used to build or extend a Raymarine SeaTalkNG network on board. It runs through the vessel and carries both data and power between connected sensors, instruments, displays and network accessories.\u003c\/p\u003e\u003cp\u003eThis range covers common backbone run lengths from short 400 mm links through to a 20 m cable, so it can be used for compact helm installations, longer cable runs through a cabin or console, or extended layouts on larger boats. The cable connects to the blue backbone terminals on SeaTalkNG T-connectors, 5-way connectors and compatible Raymarine network devices.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSeaTalkNG backbone cable for creating or extending the powered data trunk in a Raymarine marine electronics network.\u003c\/li\u003e\n\u003cli\u003eCarries both network data and power along the backbone, with individual devices connected by SeaTalkNG spur cables.\u003c\/li\u003e\n\u003cli\u003eAvailable in 400 mm, 1 m, 3 m, 5 m, 9 m and 20 m lengths to suit different helm, cabin, cockpit and equipment-space layouts.\u003c\/li\u003e\n\u003cli\u003eConnects to the blue backbone ports on SeaTalkNG T-pieces, 5-way connectors and other compatible network hardware.\u003c\/li\u003e\n\u003cli\u003eSupports cleaner cable routing by letting the backbone pass close to the locations where instruments, sensors or displays will be added.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe available configurations vary by cable length: 400 mm, 1 m, 3 m, 5 m, 9 m and 20 m. This lets the same SeaTalkNG backbone cable type be matched to short interconnects behind a helm panel or longer runs through the boat.\u003c\/p\u003e\u003cp\u003eAcross the range, the connection role remains the same: each cable is used as part of the SeaTalkNG backbone and plugs into the blue backbone side of compatible SeaTalkNG network fittings.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the backbone route before installation so it runs past the main locations where networked equipment may be installed. Displays, sensors and instruments normally connect to the backbone through spur cables and T-pieces, while the backbone itself forms the main path for network communication and power distribution.\u003c\/p\u003e\u003cp\u003eFor longer or more complex layouts, cable length should be selected to avoid unnecessary loops while still leaving enough service slack for access behind panels and at connection points. SeaTalkNG backbone cables can also be joined with the correct backbone extender when a custom run length is needed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for Raymarine SeaTalkNG network installations and is not a general-purpose power cable. It is a good match for boat owners, installers and electronics technicians adding Raymarine instruments, sensors, autopilot components or multifunction displays to an existing SeaTalkNG backbone.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the required cable length, the location of the blue backbone ports, and the overall network layout, including terminators, power feed and spur connections. Matching the cable to the actual run on the boat helps keep the installation tidy and easier to service later.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"400MM","offer_id":51550304895222,"sku":"APL948605-7","price":44.99,"currency_code":"USD","in_stock":true},{"title":"20M","offer_id":51550304927990,"sku":"APL948605-0","price":99.99,"currency_code":"USD","in_stock":true},{"title":"5M","offer_id":51550304960758,"sku":"APL948605-8","price":69.99,"currency_code":"USD","in_stock":true},{"title":"1M","offer_id":51550304993526,"sku":"APL948605-5","price":49.99,"currency_code":"USD","in_stock":true},{"title":"3M","offer_id":51550305026294,"sku":"APL948605-9","price":54.99,"currency_code":"USD","in_stock":true},{"title":"9M","offer_id":51550305059062,"sku":"APL948605-10","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1325369_apl948605.webp?v=1787790345"},{"product_id":"apl527611","title":"Seaview ADAS1 Plate Black For Small Satellite Domes ADAS1BLK","description":"\u003cp\u003eSeaview's innovative new modular electronic mounts feature a unique universal plate design that provides a cleaner look and greater installation flexibility. A pre-drilled anodized aluminum plate is incased inside the UV stable white ABS plastic. There are dimple holes on the top surface of the top plate match up with a drill template allowing you to precisely drill the appropriate holes for your specific radar. The end result is a nice clean look with no unwanted visible holes.\u003c\/p\u003e\n\u003cp\u003eThis modular Top Plate fits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntellian i1 (for modular parts ending in M1) \/ i2 \/ i3\u003c\/li\u003e\n\u003cli\u003eGlomex 20\"-27\" Satdomes (for modular parts ending in M1)\u003c\/li\u003e\n\u003cli\u003eKVH M1 (for modular parts ending in M1) \/ M2 \/ M3\u003c\/li\u003e\n\u003cli\u003eThrane \u0026amp; Thrane Sailor FB500 \/ Fleet 55+\u003c\/li\u003e\n\u003cli\u003eRaymarine 33STV (for modular parts ending in M1) \/ 37STV\u003c\/li\u003e\n\u003cli\u003eSea-King 1500HD\u003c\/li\u003e\n\u003cli\u003eSea-Tel (Cobham) C14\u003c\/li\u003e\n\u003cli\u003eVDO Ocean Line 132 (for modular parts ending in M1) \/ Ocean Line 337.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding-bottom: 10px; font-family: Helvetica, Arial, sans-serif; letter-spacing: -2px; color: #767572; font-size: 25px; font-weight: bold\"\u003eFeatures:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"line-height: 130%; font-family: Helvetica, Arial, sans-serif; color: #767572\" valign=\"top\"\u003e\n\u003cul\u003e\n\u003cli\u003eNo more unwanted visible holes in the mounting plate!\u003c\/li\u003e\n\u003cli\u003eEasy 3 step modular system.\u003c\/li\u003e\n\u003cli\u003eAft, forward, vertical and dual mount designs..\u003c\/li\u003e\n\u003cli\u003eEasily add on accessories such as lightbars, spreader kits, hinges, wedges and much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse\" width=\"100%\" bgcolor=\"#C0D5D8\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfont color=\"#FF0000\" size=\"4\"\u003e\u003cb\u003eStep 1\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#FF0000\" size=\"4\"\u003e\u003cb\u003eSelect Mount Type this will be the base for the system\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eClosed Dome Radar, Small Satdomes (16\" or smaller) \u0026amp; Cameras\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-107-M1\u003c\/td\u003e\n\u003ctd\u003e10\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-107-M1\u003c\/td\u003e\n\u003ctd\u003e10\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-167-M1\u003c\/td\u003e\n\u003ctd\u003e16\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-247-M1\u003c\/td\u003e\n\u003ctd\u003e24\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-367-M1\u003c\/td\u003e\n\u003ctd\u003e36\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM5-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM12-M1\u003c\/td\u003e\n\u003ctd\u003e12\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM18-M1\u003c\/td\u003e\n\u003ctd\u003e18\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eOpen Array Radar\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eLarge Satdomes (18\" - 24\")\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-1210-M2\u003c\/td\u003e\n\u003ctd\u003e12\" Modular Mnt\/ AFT raked \/ 10 x 10 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-1810-M2\u003c\/td\u003e\n\u003ctd\u003e18\" Modular Mnt\/ AFT raked \/ 10 x 10 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eDual Mount \u0026amp; Arches\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM1-M2\u003c\/td\u003e\n\u003ctd\u003e12.5\" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM124-M2 (***)\u003c\/td\u003e\n\u003ctd\u003e32.5\" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM2-M2\u003c\/td\u003e\n\u003ctd\u003e22.5\" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM3-M2\u003c\/td\u003e\n\u003ctd\u003e28\" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" style=\"border-collapse: collapse\" border=\"1\" bgcolor=\"#83BFD1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eStep 2\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eChoose Top Plate\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eRadar (closed dome \u0026amp; open array 4'-6')\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eADA-R1\u003c\/td\u003e\n\u003ctd\u003eModular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eADA-R2\u003c\/td\u003e\n\u003ctd\u003eModular plate for 24\" JRC \/ Lowrance 2400HD \/ Northstar \u0026amp; Simrad DX64S Domes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eSatdome\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S1\u003c\/td\u003e\n\u003ctd\u003e\n\u003csup\u003e1 \u003c\/sup\u003eModular plate for KVH M1\/M2\/M3 , Intellian i1\/i2\/i3, Raymarine 33\/37STV, SeaKing 1500\/1800-HD, SeaTel ST14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S2\u003c\/td\u003e\n\u003ctd\u003eModular plate for KVH M5\/M7, Intellian i4\/i6\/d6, Raymarine 45\/60STV, SeaTel C18\/C24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S3\u003c\/td\u003e\n\u003ctd\u003e\n\u003csup\u003e2\u003c\/sup\u003e Modular plate for KVH M1, Intellian i1\/i2, Raymarine 33STV, SeaKing 1500\/1800-HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S4\u003c\/td\u003e\n\u003ctd\u003eModular plate for ALL FB150 \u0026amp; FB250 domes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-F1\u003c\/td\u003e\n\u003ctd\u003eModular plate for FLIR M or Ray T series thermal cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" bgcolor=\"#C0D5D8\" style=\"border-collapse: collapse\" border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eStep 3\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eChoose Optional Accessories\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eLight \/ GPS Bars\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#000080\"\u003e(Light bar top accessory required, see below)\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-R\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for closed dome radar \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-OA\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for open array radar up to 4.5 ft. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-OA6\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for open array radar at 6 ft. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-S\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for 18\" or smaller satdomes \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-S24\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for 24\" satdomes \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-SF (***)\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for FLIR M or Raymarine T series thermal camera and light \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\" size=\"4\"\u003e\u003cb\u003eLight Bar Tops\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\" size=\"4\"\u003e\u003cb\u003e(LTB TOP required with light bars above)\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-U\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Standard 1-14 thread for GPS or similar\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-U1A\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Universal Light bar top for mounting your own light and or GPS\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTBP-1197\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Perko 1197 light with 7' of wire \/ USCG approved for boats up to 20 meters (65. 6 ft) in length.\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTBA-7800\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Attwood LED 7800 ser. light with 7' of wire \/ USCG approved for boats up to 20 meters (65. 6 ft).\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-BOX\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Universal box top for All-round, Masthead \u0026amp; Stern (lights not included)\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eLight Bar Accessories\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-114LT-DLX\u003c\/td\u003e\n\u003ctd\u003eFloodlight kit for 1 1\/4 in. dia. LTB  (includes 4\" X 6\" 55-watt 14V quartz halogen floodlight \u0026amp; hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-114LT-LED (***)\u003c\/td\u003e\n\u003ctd\u003eFloodlight kit for 1 1\/4 in. dia. LTB  (includes LED floodlight \u0026amp; hardware) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-U2A\u003c\/td\u003e\n\u003ctd\u003eLight bar adapter to mount a light and 2 GPS (electronics not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eBase Wedge\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-W4-7\u003c\/td\u003e\n\u003ctd\u003e4 degree wedge\/ for 7x7 radar mount base plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-W4-8\u003c\/td\u003e\n\u003ctd\u003e4 degree wedge\/ for 8x8 radar mount base plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eHinge Adapters for base plate\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-H7\u003c\/td\u003e\n\u003ctd\u003eHinge adapter\/ for 7x7 base plate\/  (fits most 5 -16 in. tall Radar Mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-H8\u003c\/td\u003e\n\u003ctd\u003eHinge adapter\/ for 8x8 base plate\/  (fits most 24 -36 in. tall Radar Mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Seaview","offers":[{"title":"Default Title","offer_id":51550305190134,"sku":"APL527611","price":154.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109316_apl527611jpg.jpg?v=1787790363"},{"product_id":"apl297036","title":"NavPod - GP1506 SystemPod Pre-Cut - For Simrad NSS7 evo2, B\u0026G Zeus 7, With pace On The Left, For 9.5\" Wide Guard","description":"\u003ch4\u003eUnify Your Simrad or B\u0026amp;G Display with the GP1506 SystemPod\u003c\/h4\u003e\n\u003cp\u003eTake command of your helm layout and streamline your electronics setup with the NavPod GP1506 SystemPod. This innovative pod comes pre-cut to seamlessly house your compatible Simrad NSS7 evo2 or B\u0026amp;G Zeus 7 chartplotter, while also offering additional space on the left side for another essential device. Whether you prefer an autopilot controller, instrument display, or VHF radio, the GP1506 SystemPod keeps your vital electronics organized and within easy reach.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless Integration: The pre-cut design ensures a perfect fit for your Simrad or B\u0026amp;G chartplotter, eliminating the need for modifications and guaranteeing a clean, professional look.\u003c\/li\u003e\n\u003cli\u003eReduced System Height: The SystemPod's design allows you to stack your electronics vertically, minimizing the overall height of your system and improving visibility at the helm.\u003c\/li\u003e\n\u003cli\u003eFlexible Customization: The additional space on the left side provides the freedom to mount an additional device, tailored to your specific needs and preferences.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Built with tough, acrylic capped ABS plastic, the SystemPod is built to withstand the harsh marine environment. Chromed stainless steel, tamper-proof fasteners provide watertight integrity and long-lasting performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Acrylic capped ABS plastic\u003c\/li\u003e\n\u003cli\u003eFasteners: Chromed stainless steel, tamper-proof\u003c\/li\u003e\n\u003cli\u003eSeal: Double seal for watertight integrity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOverall Size: 11.3\"H x 16.5\"W x 5.55\"D\u003c\/li\u003e\n\u003cli\u003eUsable Face: 15\"W x 6\"H\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFinishes\u003c\/h4\u003e\n\u003cp\u003eThe GP1506 SystemPod comes in a sleek black finish, complementing the aesthetics of modern marine vessels.\u003c\/p\u003e\n\u003ch4\u003eCompatible Mounting Options\u003c\/h4\u003e\n\u003cp\u003eThe GP1506 is designed for versatile mounting applications (not included):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Bend AngleGuard: Ideal for mounting the SystemPod on a pole for optimal visibility.\u003c\/li\u003e\n\u003cli\u003eSK135 Stachion Kit: Enables mounting on flat surfaces like the flybridge or for overhead applications.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550307483894,"sku":"APL297036","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708210_apl297036.jpg?v=1787790467"},{"product_id":"apl115461","title":"Garmin Steer-by-Wire Interconnect Cable, 3 m, For GHP Reactor Autopilot CCU, Bare Wire Buzzer Connections","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11351-50 is a 3 m interconnect cable that links a Garmin Reactor autopilot CCU (course computer unit) to a steer-by-wire controller.\u003c\/p\u003e\u003cp\u003eUse it when your boat has steer-by-wire steering and the autopilot needs the dedicated CCU-to-controller connection for steering commands and feedback.\u003c\/p\u003e\u003cp\u003eThe harness also includes bare-wire leads intended for a buzzer connection, which can be integrated into an audible alarm circuit if your installation uses one.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 m (about 10 ft) length for typical helm-to-controller or console runs\u003c\/li\u003e\n\u003cli\u003eUsed to connect a Reactor autopilot CCU (course computer unit) to a steer-by-wire controller\u003c\/li\u003e\n\u003cli\u003eBare-wire leads provided for a buzzer connection\u003c\/li\u003e\n\u003cli\u003eSingle dedicated interconnect harness that keeps the CCU-to-controller wiring straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used between the Reactor autopilot CCU and a steer-by-wire controller. It is not a general-purpose power lead or a network backbone cable.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your steering is steer-by-wire (not a hydraulic pump drive) and that both the CCU and the steer-by-wire controller have the matching interconnect ports for this harness.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the routing from the CCU mounting location to the steer-by-wire controller and verify the 3 m length covers the full run with a little service slack. Keep the cable away from sharp edges, moving linkages, and high-heat areas, and add chafe protection where it passes through bulkheads.\u003c\/p\u003e\u003cp\u003eIn helm or console spaces, secure the run so vibration does not work the connectors loose over time, and keep connection points above areas that can collect spray or bilge water.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis interconnect is a common need on boats with steer-by-wire where the CCU is mounted inside a console and the steer-by-wire controller is located near the helm. It also fits repowers and refits where the existing harness is too short, damaged, or missing.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550308958454,"sku":"APL115461","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696709_apl115461_jpeg.jpg?v=1787790551"},{"product_id":"apl180720","title":"Edson Marine - Vision Series Mounting Plate - For Intellian, Raymarine 45STV, Sea King 18, SeaTel C18 \u0026 C24","description":"\u003ch4\u003eSeamlessly Integrate Your Marine Electronics with Premium Mounting Solutions\u003c\/h4\u003e\n\u003cp\u003eExperience unparalleled flexibility and convenience in installing your marine satellite and communication systems with the Edson Vision Series Mounting Plate. Whether you're navigating the open seas or anchoring in a serene bay, this mounting system ensures your marine electronics are securely and elegantly mounted. Designed to cater to a wide range of equipment from leading brands such as Intellian, KVH, Raymarine, Sea King, and SeaTel, the Vision Series Mounting Plate is your go-to solution for a seamless integration onboard.\u003c\/p\u003e\n\u003ch4\u003eKey Features Tailored for the Sea\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal compatibility with top marine electronics brands\u003c\/li\u003e\n\u003cli\u003eRobust design ensures stability in all sea conditions\u003c\/li\u003e\n\u003cli\u003eEasy installation for a streamlined setup process\u003c\/li\u003e\n\u003cli\u003eHigh-grade materials resist corrosion and wear\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDesigned to Endure\u003c\/h4\u003e\n\u003cp\u003eConstructed with the challenges of the marine environment in mind, the Vision Series Mounting Plates are made from materials that offer exceptional durability and resistance to the harsh marine elements. Enjoy peace of mind knowing your electronics are mounted on a platform built to withstand the rigors of sea life.\u003c\/p\u003e\n\u003ch4\u003eStreamline Your Setup\u003c\/h4\u003e\n\u003cp\u003eWith dimensions tailored to integrate seamlessly with your vessel's aesthetic, the Vision Series Mounting System offers a sleek and unobtrusive installation. Base mounts are sold separately, allowing you to customize the system to your specific installation needs.\u003c\/p\u003e\n\u003ch4\u003eElegantly Crafted for Marine Use\u003c\/h4\u003e\n\u003cp\u003eChoose from a selection of finishes that complement your boat's design, ensuring that functionality doesn't come at the expense of style. The Vision Series Mounting Plate not only provides a secure mount for your electronics but also enhances the overall look of your vessel.\u003c\/p\u003e","brand":"Edson Marine","offers":[{"title":"Default Title","offer_id":51550309089526,"sku":"APL180720","price":158.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0705638_apl180720.jpg?v=1787790563"},{"product_id":"apl222314","title":"Garmin GPSMAP 8x10 Trim Piece Snap Cover, For 8410\/8410XSV\/8610\/8610XSV","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12800-00 is a snap-on trim piece cover used to finish off a Garmin glass helm installation on select GPSMAP 8x10 chartplotters. It fits GPSMAP 8410, GPSMAP 8410xsv, GPSMAP 8610, and GPSMAP 8610xsv units.\u003c\/p\u003e\u003cp\u003eThis is a small cosmetic and protective part that covers the trim area so the helm cutout looks tidy and the edges are not left exposed. It is not a sun cover for the screen and it does not connect to power or the marine network.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSnap-on trim cover for Garmin glass helm installs on GPSMAP 8x10 chartplotters\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 8410, 8410xsv, 8610, and 8610xsv\u003c\/li\u003e\n\u003cli\u003eHelps restore a clean helm finish when trim pieces are missing, scuffed, or damaged\u003c\/li\u003e\n\u003cli\u003eNo wiring, no software setup, and no impact on electronics or network integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is model-specific, so confirm your chartplotter model number on the unit label or in the system information menu before ordering. This trim piece cover is for GPSMAP 8410 and 8610 series units (including xsv versions) and is not interchangeable with other GPSMAP sizes such as 8x12 or 8x16.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is a simple snap-on fit. Dry-fit the cover first, then align it with the trim area on the glass helm and press evenly until it seats.\u003c\/p\u003e\u003cp\u003eIf you ever need to remove it for service or to rework the panel, work gently from an edge and avoid metal tools that can chip gelcoat or scratch the helm surface.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and grime off during normal washdowns and wipe with mild soap and water. Avoid strong solvents that can haze plastics or soften finishes around the helm.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550310433014,"sku":"APL222314","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697287_apl222314_jpeg.jpg?v=1787790595"},{"product_id":"apl925026","title":"Raymarine RayNet to SeaTalk HS Adapter Cable, Female to Male, 3m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine A80276 is a 3 m RayNet female to SeaTalk HS male adapter cable for connecting selected legacy Raymarine multifunction displays to newer RayNet network devices. It gives installers a direct cable path between systems that use the older SeaTalk HS connection and accessories that use the RayNet connector style, without changing the display or adding a separate network converter.\u003c\/p\u003e\u003cp\u003eThis cable is commonly used when a G-Series, E-Wide, C-Wide, or E-Classic MFD needs to communicate with a RayNet radar, sonar module, or other compatible Raymarine network accessory. The 10 ft length gives enough reach for many helm, electronics locker, and console installations while keeping the network connection tidy.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRayNet female to SeaTalk HS male adapter cable for Raymarine marine network connections.\u003c\/li\u003e\n\u003cli\u003e3 m cable length, also listed as 10 ft, for routing between displays and nearby network accessories.\u003c\/li\u003e\n\u003cli\u003eSupports direct connection from G-Series, E-Wide, C-Wide, and E-Classic MFDs to RayNet radar, sonar, or compatible Raymarine accessories.\u003c\/li\u003e\n\u003cli\u003eUseful for retrofit installations where an existing Raymarine display is staying on board while newer RayNet equipment is being added.\u003c\/li\u003e\n\u003cli\u003eKeeps the connection within Raymarine network hardware, which helps reduce connector mismatches during helm or electronics cabinet upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore installation, confirm the connector style at both ends of the run. This adapter is for a RayNet female connection on one end and a SeaTalk HS male connection on the other, so it is intended for systems where those two Raymarine network formats need to meet.\u003c\/p\u003e\u003cp\u003eRoute the cable where it will not be pinched, pulled tight, or exposed to sharp bends behind the display. On boats with crowded helms or electronics compartments, leaving a small service loop makes future display removal and accessory changes much easier.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a practical fit for owners refitting Raymarine electronics in stages, especially when older G-Series, E-Wide, C-Wide, or E-Classic displays remain in service. It is most relevant for radar, sonar, and other network accessory connections where the system has mixed SeaTalk HS and RayNet hardware.\u003c\/p\u003e\u003cp\u003eIt suits helm stations, flybridges, electronics lockers, and console installations where space is limited and a purpose-specific adapter cable is cleaner than piecing together multiple adapters.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":51550311579894,"sku":"APL925026","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323334_apl925026.jpg?v=1787790603"},{"product_id":"apl519931","title":"Digital Antenna - DA140 Motorola Type Plug for RG8X","description":"\u003ch4\u003eHigh-Quality Connectivity for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eDigital Antenna DA140 Motorola Type Connector\u003c\/strong\u003e is designed to provide a secure and efficient connection for RG8X coaxial cables, ensuring optimal signal transmission in marine environments. Built for durability and reliability, this solder-on connector is an essential component for maintaining clear and stable communications on the water.\u003c\/p\u003e\u003ch4\u003ePrecision Engineering for Secure Connections\u003c\/h4\u003e\u003cp\u003eThis Motorola Type connector is specifically crafted to fit \u003cstrong\u003eRG8X coaxial cables\u003c\/strong\u003e, allowing for a firm and stable attachment. The solder-on design enhances conductivity while reducing signal loss, making it a trusted choice for boaters and marine communication systems.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for \u003cstrong\u003eRG8X coaxial cables\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolder-on connection\u003c\/strong\u003e for enhanced signal integrity\u003c\/li\u003e\n\u003cli\u003eReliable Motorola Type plug for \u003cstrong\u003emarine communication systems\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDurable construction for \u003cstrong\u003elong-lasting performance in marine environments\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Antenna","offers":[{"title":"Default Title","offer_id":51550312628470,"sku":"APL519931","price":28.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834257_apl519931.jpg?v=1787790638"},{"product_id":"apl419670","title":"Garmin GPSMAP 9000 Series Premium Chartplotter, BlueNet, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin GPSMAP 9000 series is a fully integrated touchscreen chartplotter line for glass-helm installs, offered in 10, 13, 17, 19, 22, 24, and 27-inch displays.\u003c\/p\u003e\u003cp\u003eOn 10-inch and 13-inch models you get an HD touchscreen; 17-inch and larger units step up to a 4K IPS touchscreen. Across the range, processing power is rated up to 7 times faster than the previous generation, and the housing is IPX7 water-resistant for open-helm spray and routine washdowns.\u003c\/p\u003e\u003cp\u003eThese displays sit at the center of a connected helm. They support Garmin BlueNet with gigabit networking, plus NMEA 2000 and NMEA 0183 for tying in autopilot control, sensors, AIS, and engine gateways. Variants are available as chartplotter-only or with built-in sonar, and with either a worldwide basemap or built-in Garmin Navionics+ mapping.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDisplay size options from 10-inch through 27-inch to match console space and viewing distance\u003c\/li\u003e\n\u003cli\u003eHD touchscreen on 10-inch and 13-inch models; 4K IPS touchscreen on 17-inch and larger models\u003c\/li\u003e\n\u003cli\u003eGarmin BlueNet support with gigabit networking for multi-display helms and shared accessories\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 and NMEA 0183 connectivity for integrating autopilot, sensors, AIS, VHF, and engine data interfaces\u003c\/li\u003e\n\u003cli\u003e5 GHz Wi-Fi support for fast wireless updates and mobile integration through the ActiveCaptain app\u003c\/li\u003e\n\u003cli\u003eIPX7 water-resistance rating for wet helms, salt spray, and washdowns\u003c\/li\u003e\n\u003cli\u003eVideo integration support with HDCP distribution for bringing compatible video sources onto the helm\u003c\/li\u003e\n\u003cli\u003eConfigurations offered with built-in sonar or as chartplotter-only, depending on how you build your sounder system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product range is offered in multiple configurations that change three things: display size, the chart package, and whether the unit includes built-in sonar.\u003c\/p\u003e\u003cp\u003eChart options are either a worldwide basemap or built-in Garmin Navionics+. Sonar options are listed as Yes or No; sonar-enabled units accept a compatible transducer directly at the display, while non-sonar versions are used with external sonar sources if you want sounder data on screen.\u003c\/p\u003e\u003ch6\u003eInstallation and helm fit\u003c\/h6\u003e\u003cp\u003ePlan the install around the cutout and the rear clearance for cables and bend radius, especially on larger 4K screens where multiple network and video connections may be used. A flush-mount glass-helm install keeps the screen readable and reduces snag points in the cockpit, but a bail mount can make sense on open boats where you want quick access behind the unit.\u003c\/p\u003e\u003cp\u003eOn saltwater boats, run wiring so connectors stay above bilge level and away from direct washdown streams. Use a drip loop on every cable run and keep network cabling separated from high-current runs to reduce noise.\u003c\/p\u003e\u003ch6\u003eNetworking and system integration\u003c\/h6\u003e\u003cp\u003eGarmin BlueNet gives you the bandwidth for high-traffic accessories like radar, cameras, and multi-screen chart sharing. NMEA 2000 and NMEA 0183 support makes it straightforward to bring in heading sensors, AIS targets, autopilot control, and engine data through compatible gateways.\u003c\/p\u003e\u003cp\u003eIf you are replacing an older multi-function display, confirm your existing network type and connector standards before you plan adapters or backbone changes. On boats with multiple stations, keeping network standards consistent across stations helps avoid duplicated sensors and unnecessary conversions.\u003c\/p\u003e\u003ch6\u003eWho this is a good match for\u003c\/h6\u003e\u003cp\u003eThis series fits skippers building a connected helm where charting, radar, autopilot control, and camera views live on the same screen. It also suits larger center consoles, sportfishers, and yachts where a 19-inch to 27-inch display improves split-screen readability for offshore runs and busy inlets.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Worldwide basemap \/ No \/ 19\"","offer_id":51550312661238,"sku":"APL419670-V14","price":10099.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 22\"","offer_id":51550312694006,"sku":"APL419670-V0","price":11699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 17\"","offer_id":51550312726774,"sku":"APL419670-V13","price":6699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ Yes \/ 10\"","offer_id":51550312759542,"sku":"APL419670-V18","price":3699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 13\"","offer_id":51550312792310,"sku":"APL419670-V12","price":4499.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ Yes \/ 13\"","offer_id":51550312825078,"sku":"APL419670-V22","price":4999.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 17\"","offer_id":51550312857846,"sku":"APL419670-V10","price":6699.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 10\"","offer_id":51550312890614,"sku":"APL419670-V11","price":3199.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 24\"","offer_id":51550312923382,"sku":"APL419670-V6","price":13699.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 13\"","offer_id":51550312956150,"sku":"APL419670-V9","price":4499.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 27\"","offer_id":51550312988918,"sku":"APL419670-V1","price":17199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ Yes \/ 13\"","offer_id":51550313021686,"sku":"APL419670-V19","price":4999.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ Yes \/ 10\"","offer_id":51550313054454,"sku":"APL419670-V21","price":3699.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 19\"","offer_id":51550313087222,"sku":"APL419670-V7","price":10199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 27\"","offer_id":51550313119990,"sku":"APL419670-V17","price":17099.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 22\"","offer_id":51550313152758,"sku":"APL419670-V15","price":11599.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ No \/ 10\"","offer_id":51550313185526,"sku":"APL419670-V8","price":3199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ Yes \/ 17\"","offer_id":51550313218294,"sku":"APL419670-V20","price":7199.99,"currency_code":"USD","in_stock":true},{"title":"Garmin Navionics+ \/ Yes \/ 17\"","offer_id":51550313251062,"sku":"APL419670-V23","price":7199.99,"currency_code":"USD","in_stock":true},{"title":"Worldwide basemap \/ No \/ 24\"","offer_id":51550313283830,"sku":"APL419670-V16","price":13599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1282081_apl419670.webp?v=1787790607"},{"product_id":"apl157299","title":"NavPod - GP1213 SailPod Pre-Cut - For Raymarine gS125 Glass Bridge, For 9.5\" Wide Guard","description":"\u003ch4\u003eEnhance Your Helm with the NavPod GP1213 SailPod for Raymarine gS125\u003c\/h4\u003e\n\u003cp\u003eEmbark on a seamless navigation experience with the NavPod GP1213 SailPod, specially pre-cut for the Raymarine gS125 Glass Bridge for a 9.5\" wide guard. This innovative mounting solution is engineered for mariners who prioritize both functionality and aesthetics at the helm. The GP1213 SailPod not only elevates your navigation ease but also integrates flawlessly with your vessel's design, offering a pristine, high-gloss finish that conceals cables and enhances the overall look of your setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfectly tailored for the Raymarine gS125 Glass Bridge, ensuring a snug and secure fit.\u003c\/li\u003e\n\u003cli\u003eStreamlines navigation with strategic placement at the helm for optimal visibility and access.\u003c\/li\u003e\n\u003cli\u003eFeatures a high-gloss finish for a sleek, sophisticated appearance that complements any helm.\u003c\/li\u003e\n\u003cli\u003eConstructed with a double gasket waterproof seal, offering unmatched protection against harsh marine conditions.\u003c\/li\u003e\n\u003cli\u003eIncludes nickel chrome plated tamperproof screws, adding security with a touch of elegance.\u003c\/li\u003e\n\u003cli\u003eBacked by a 10-year warranty, reflecting NavPod's commitment to quality and customer satisfaction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePrecision Engineering for Unmatched Reliability\u003c\/h4\u003e\n\u003cp\u003eThe NavPod GP1213 SailPod goes beyond mere aesthetics, offering robust protection for your Raymarine gS125 Glass Bridge. Designed to endure the rigors of offshore conditions, this SailPod guarantees to keep your electronics safe and operational, no matter the weather. Experience peace of mind with a solution that's as durable as it is stylish, making it the perfect companion for serious sailors and casual cruisers alike.\u003c\/p\u003e\n\u003ch4\u003eSeamless Integration for a Streamlined Helm\u003c\/h4\u003e\n\u003cp\u003eInstallation is a breeze with the GP1213 SailPod, designed for effortless integration onto either a Single Bend AngleGuard or a Double Bend AngleGuard. This flexibility allows for a customized setup that meets your specific needs, whether you're looking to mount additional instruments above or simply aiming for a clean, organized helm.\u003c\/p\u003e\n\u003ch4\u003eA Commitment to Excellence\u003c\/h4\u003e\n\u003cp\u003eNavPod stands behind the GP1213 SailPod with a decade-long warranty, a testament to our confidence in its quality and durability. Embrace the perfect blend of functionality, protection, and style at your helm with the GP1213 SailPod, and navigate with confidence knowing your electronics are secured in a mount that's built to last.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550325113078,"sku":"APL157299","price":499.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708485_apl157299.jpg?v=1787790937"},{"product_id":"apl607909","title":"Simrad NSS16 evo3\/3S Display Sun Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13743-001 is a snap-on sun cover for Simrad NSS16 evo3 and NSS16 evo3S 16 inch multifunction displays.\u003c\/p\u003e\u003cp\u003eIt keeps the display face protected while the boat is parked, trailered, or covered at the dock, helping block direct sun and keeping dust, salt residue, and everyday scuffs off the screen and bezel.\u003c\/p\u003e\u003cp\u003eThe cover seats over the front of the unit and removes quickly by hand, so it is easy to use between trips without changing your helm setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Simrad NSS16 evo3 and NSS16 evo3S 16 inch displays\u003c\/li\u003e\n\u003cli\u003eHard cover that shields the screen and bezel when the unit is not in use\u003c\/li\u003e\n\u003cli\u003eHelps keep UV exposure, salt spray residue, and surface scratches off the display face\u003c\/li\u003e\n\u003cli\u003eInstalls and removes by hand with no tools\u003c\/li\u003e\n\u003cli\u003eUseful for open helms where the display is exposed between runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover matches the front profile of the NSS16 evo3 and NSS16 evo3S. If your display is a different series or screen size, the fit will differ, so it is worth confirming the exact model at the helm before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003ePress the cover onto the display face until it sits evenly around the bezel. Before fitting it, wipe away any grit or dried salt so debris does not get trapped against the screen.\u003c\/p\u003e\u003cp\u003eRemove the cover before powering up and operating the display.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eAfter a salty run, rinse the cover with fresh water and let it dry before stowing. Keeping sand out of the helm area helps prevent fine scratches when the cover is installed and removed.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eScreen cover (sun cover) for NSS16 evo3\/evo3S\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eA solid fit for boats stored outdoors, kept on a lift, or run hard in saltwater where the helm stays exposed. It also makes sense for anglers and cruisers who want quick protection at the dock without removing the display from the dash.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":51550325866742,"sku":"APL607909","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0836797_apl607909.jpg?v=1787790968"},{"product_id":"apl158099","title":"Garmin GPSMAP 8400\/8600 MFD, NMEA 2000, Garmin Marine Network","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin GPSMAP 84xx\/86xx series is a touchscreen multifunction display and chartplotter family with 10\", 12\", 16\", and 17\" Full HD screens, sold in packages that can include built-in sonar and either a Worldwide basemap or Garmin Navionics+ charts. It brings charting, navigation, and system control onto one helm display, with a screen that stays readable in bright sun and when you are wearing polarized sunglasses.\u003c\/p\u003e\u003cp\u003eFor system builds, it connects over NMEA 2000 and the Garmin Marine Network so you can share data and accessories across displays. Wireless connectivity includes Wi-Fi, Bluetooth, and ANT, which helps when you want app-based management and compatible wireless accessories in the cockpit.\u003c\/p\u003e\u003cp\u003eAll models use a housing built from die-cast aluminum and polycarbonate plastic and carry an IEC 60529 IPX7 water rating for incidental exposure up to 1 m for up to 30 minutes. Power input and fusing depend on display size, with support that fits common 12 V and 24 V onboard systems when wired and protected correctly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFull HD IPS touchscreen display in 10\", 12\", 16\", or 17\" sizes depending on configuration\u003c\/li\u003e\n\u003cli\u003eIEC 60529 IPX7 water rating for incidental exposure up to 1 m for up to 30 minutes\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminum and polycarbonate plastic housing for helm environments with vibration and salt air\u003c\/li\u003e\n\u003cli\u003ePower input supports typical 12 V and 24 V systems: 10 to 32 VDC on 10\"\/12\"\/16\" models and 10 to 35 VDC on 17\" models\u003c\/li\u003e\n\u003cli\u003eNetworking support for NMEA 2000 and the Garmin Marine Network to share data and accessories between stations\u003c\/li\u003e\n\u003cli\u003eWi-Fi, Bluetooth, and ANT wireless connectivity, including ActiveCaptain app support\u003c\/li\u003e\n\u003cli\u003eSmartMode station controls for quick recall of saved helm layouts\u003c\/li\u003e\n\u003cli\u003eSailAssist sailing tools available for sailing data pages and race guidance\u003c\/li\u003e\n\u003cli\u003eOn Sonar Yes configurations, built-in sonar support for CHIRP traditional plus ClearVü and SideVü scanning sonar with a compatible transducer\u003c\/li\u003e\n\u003cli\u003eChart bundle varies by package: Worldwide basemap or Garmin Navionics+\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product family is offered across multiple screen sizes and bundle options. The configurations vary by display size (10\", 12\", 16\", or 17\"), the included charts and maps (Worldwide basemap or Garmin Navionics+), and whether the package includes built-in sonar (Sonar Yes) or a chartplotter-only setup (Sonar No).\u003c\/p\u003e\u003cp\u003eWhen comparing options, treat Sonar Yes as the chartplotter\/sonar combination packages and Sonar No as the display-only chartplotter packages. Chart content is also tied to the bundle, so the included cartography depends on whether the configuration is listed with Worldwide basemap or Garmin Navionics+.\u003c\/p\u003e\u003ch6\u003eInstallation and helm fit\u003c\/h6\u003e\u003cp\u003eThese displays can be mounted flush in a dash cutout or flat mounted so multiple screens can sit edge-to-edge for a glass-helm style panel. For 10\", 12\", and 16\" units, plan about 11.1 cm (4 3\/8 in.) of clearance behind the panel for connectors and cable routing.\u003c\/p\u003e\u003cp\u003eIf you prefer a bracket mount, the 10\" and 12\" models include the bail-mount bracket and hardware, while the 16\" bail mount uses an accessory bracket. Before you seal and fasten the unit, confirm cable routing, strain relief, and access to the back of the display for service and any card access your setup requires.\u003c\/p\u003e\u003ch6\u003eElectrical and environmental notes\u003c\/h6\u003e\u003cp\u003eOperating temperature range is -15°C to 55°C (5°F to 131°F). For overcurrent protection, the 10\"\/12\"\/16\" models specify a 10 A, 125 V fast-acting fuse, while the 17\" models specify a 15 A fuse.\u003c\/p\u003e\u003cp\u003ePower input depends on size: 10\"\/12\"\/16\" models accept 10 to 32 VDC, and 17\" models accept 10 to 35 VDC. That range supports both 12 V and 24 V systems, but the wiring gauge and fuse selection should match the model and your run length.\u003c\/p\u003e\u003ch6\u003eNetworking and system integration\u003c\/h6\u003e\u003cp\u003eNMEA 2000 support allows the display to sit on a backbone with engine data, sensors, and marine instruments, while the Garmin Marine Network supports sharing and integration across multiple displays and network accessories. SmartMode layouts help keep common helm views one tap away when switching between tasks on the water.\u003c\/p\u003e\u003cp\u003eWi-Fi supports pairing with the ActiveCaptain app for functions such as software management and smart notifications, and OneHelm integration support allows compatible third-party systems to be controlled from the screen.\u003c\/p\u003e\u003ch6\u003eSonar and transducer pairing\u003c\/h6\u003e\u003cp\u003eConfigurations marked with Sonar Yes include built-in sonar capability. They support traditional CHIRP sonar and scanning views such as ClearVü and SideVü, with results that depend on choosing a compatible transducer matched to your hull and fishing style.\u003c\/p\u003e\u003cp\u003eConfigurations marked with Sonar No are chartplotter-only packages, which can make sense when sonar is already handled elsewhere in the system or when you prefer to add it separately.\u003c\/p\u003e\u003ch6\u003eCharts and day-to-day navigation\u003c\/h6\u003e\u003cp\u003eSome packages include the Worldwide basemap for general navigation, while others include Garmin Navionics+ chart content. Keeping the same chart bundle across stations can simplify route sharing and make it easier to keep everyone on the same page when running inshore channels or planning an offshore track.\u003c\/p\u003e\u003ch6\u003eWho it fits\u003c\/h6\u003e\u003cp\u003eThis family is a good match for helms that want a bright touch display with room to expand into a networked system with radar, autopilot, and instruments. Anglers who want sonar on the main screen will typically use the Sonar Yes configurations, paired with a compatible transducer that matches the boat and how it is fished.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"10\" \/ No \/ Worldwide basemap","offer_id":51550325899510,"sku":"APL158099-V8","price":2799.99,"currency_code":"USD","in_stock":false},{"title":"10\" \/ No \/ Garmin Navionics+","offer_id":51550325932278,"sku":"APL158099-V10","price":2799.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ Yes \/ Garmin Navionics+","offer_id":51550325965046,"sku":"APL158099-V3","price":6299.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ Yes \/ Worldwide basemap","offer_id":51550325997814,"sku":"APL158099-V1","price":6199.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ Yes \/ Garmin Navionics+","offer_id":51550326030582,"sku":"APL158099-V13","price":4299.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ No \/ Worldwide basemap","offer_id":51550326063350,"sku":"APL158099-V12","price":3699.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ No \/ Garmin Navionics+","offer_id":51550326096118,"sku":"APL158099-V14","price":3799.99,"currency_code":"USD","in_stock":false},{"title":"17\" \/ No \/ Worldwide basemap","offer_id":51550326128886,"sku":"APL158099-V5","price":7699.99,"currency_code":"USD","in_stock":false},{"title":"10\" \/ Yes \/ Worldwide basemap","offer_id":51550326161654,"sku":"APL158099-V7","price":2899.99,"currency_code":"USD","in_stock":false},{"title":"10\" \/ Yes \/ Garmin Navionics+","offer_id":51550326194422,"sku":"APL158099-V9","price":2999.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ No \/ Worldwide basemap","offer_id":51550326227190,"sku":"APL158099-V2","price":5699.99,"currency_code":"USD","in_stock":false},{"title":"12\" \/ Yes \/ Worldwide basemap","offer_id":51550326259958,"sku":"APL158099-V11","price":4199.99,"currency_code":"USD","in_stock":true},{"title":"16\" \/ No \/ Garmin Navionics+","offer_id":51550326292726,"sku":"APL158099-V4","price":5799.99,"currency_code":"USD","in_stock":true},{"title":"17\" \/ No \/ Garmin Navionics+","offer_id":51550326325494,"sku":"APL158099-V6","price":7799.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281865_apl158099.webp?v=1787790934"},{"product_id":"apl527249","title":"Seaview ADAF1 Plate Black For FLIR M324, 625, 612L, 617CS M618CS, MD324, MD625 ADAF1BLK","description":"\u003cp\u003eSeaview's innovative new modular electronic mounts feature a unique universal plate design that provide a cleaner look and greater installation flexibility. The end result is a nice clean look with no visible holes. This modular Top Plate fits FLIR FLIR M324,625,612L,617CS,M618CS, MD324, MD625 Raymarine T-Series.\u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003ctd\u003ePADDING-BOTTOM: 10px; FONT-FAMILY: Helvetica, Arial, sans-serif; LETTER-SPACING: -2px; COLOR: #767572; FONT-SIZE: 25px; FONT-WEIGHT: bold\"\u0026gt;Features:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"LINE-HEIGHT: 130%; FONT-FAMILY: Helvetica, Arial, sans-serif; COLOR: #767572\"\u003e\n\u003cul\u003e\n\u003cli\u003eNo more unwanted visible holes in the mounting plate!\u003c\/li\u003e\n\u003cli\u003eEasy 3 step modular system.\u003c\/li\u003e\n\u003cli\u003eAft, forward, vertical and dual mount designs..\u003c\/li\u003e\n\u003cli\u003eEasily add on accessories such as lightbars, spreader kits, hinges, wedges and much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse\" width=\"100%\" bgcolor=\"#C0D5D8\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfont color=\"#FF0000\" size=\"4\"\u003e\u003cb\u003eStep 1\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#FF0000\" size=\"4\"\u003e\u003cb\u003eSelect Mount Type this will be the base for the system\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eClosed Dome Radar, Small Satdomes (16\" or smaller) \u0026amp; Cameras\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-107-M1\u003c\/td\u003e\n\u003ctd\u003e10\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-107-M1\u003c\/td\u003e\n\u003ctd\u003e10\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-167-M1\u003c\/td\u003e\n\u003ctd\u003e16\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-247-M1\u003c\/td\u003e\n\u003ctd\u003e24\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-367-M1\u003c\/td\u003e\n\u003ctd\u003e36\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM5-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM12-M1\u003c\/td\u003e\n\u003ctd\u003e12\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM18-M1\u003c\/td\u003e\n\u003ctd\u003e18\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eOpen Array Radar\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eLarge Satdomes (18\" - 24\")\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-1210-M2\u003c\/td\u003e\n\u003ctd\u003e12\" Modular Mnt\/ AFT raked \/ 10 x 10 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-1810-M2\u003c\/td\u003e\n\u003ctd\u003e18\" Modular Mnt\/ AFT raked \/ 10 x 10 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eDual Mount \u0026amp; Arches\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM1-M2\u003c\/td\u003e\n\u003ctd\u003e12.5\" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM124-M2 (***)\u003c\/td\u003e\n\u003ctd\u003e32.5\" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM2-M2\u003c\/td\u003e\n\u003ctd\u003e22.5\" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM3-M2\u003c\/td\u003e\n\u003ctd\u003e28\" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" style=\"border-collapse: collapse\" border=\"1\" bgcolor=\"#83BFD1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eStep 2\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eChoose Top Plate\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eRadar (closed dome \u0026amp; open array 4'-6')\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eADA-R1\u003c\/td\u003e\n\u003ctd\u003eModular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eADA-R2\u003c\/td\u003e\n\u003ctd\u003eModular plate for 24\" JRC \/ Lowrance 2400HD \/ Northstar \u0026amp; Simrad DX64S Domes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eSatdome\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S1\u003c\/td\u003e\n\u003ctd\u003e\n\u003csup\u003e1 \u003c\/sup\u003eModular plate for KVH M1\/M2\/M3 , Intellian i1\/i2\/i3, Raymarine 33\/37STV, SeaKing 1500\/1800-HD, SeaTel ST14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S2\u003c\/td\u003e\n\u003ctd\u003eModular plate for KVH M5\/M7, Intellian i4\/i6\/d6, Raymarine 45\/60STV, SeaTel C18\/C24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S3\u003c\/td\u003e\n\u003ctd\u003e\n\u003csup\u003e2\u003c\/sup\u003eModular plate for KVH M1, Intellian i1\/i2, Raymarine 33STV, SeaKing 1500\/1800-HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S4\u003c\/td\u003e\n\u003ctd\u003eModular plate for ALL FB150 \u0026amp; FB250 domes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-F1\u003c\/td\u003e\n\u003ctd\u003eModular plate for FLIR M or Ray T series thermal cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" bgcolor=\"#C0D5D8\" style=\"border-collapse: collapse\" border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eStep 3\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eChoose Optional Accessories\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eLight \/ GPS Bars\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#000080\"\u003e(Light bar top accessory required, see below)\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-R\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for closed dome radar \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-OA\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for open array radar up to 4.5 ft. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-OA6\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for open array radar at 6 ft. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-S\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for 18\" or smaller satdomes \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-S24\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for 24\" satdomes \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-SF (***)\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for FLIR FLIR M324,625,612L,617CS,M618CS, MD324, MD625 Raymarine T-Series thermal camera and light \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\" size=\"4\"\u003e\u003cb\u003eLight Bar Tops\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\" size=\"4\"\u003e\u003cb\u003e(LTB TOP required with light bars above)\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-U\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Standard 1-14 thread for GPS or similar\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-U1A\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Universal Light bar top for mounting your own light and or GPS\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTBP-1197\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Perko 1197 light with 7' of wire \/ USCG approved for boats up to 20 meters (65. 6 ft) in length.\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTBA-7800\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Attwood LED 7800 ser. light with 7' of wire \/ USCG approved for boats up to 20 meters (65. 6 ft).\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-BOX\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Universal box top for All-round, Masthead \u0026amp; Stern (lights not included)\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eLight Bar Accessories\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-114LT-DLX\u003c\/td\u003e\n\u003ctd\u003eFloodlight kit for 1 1\/4 in. dia. LTB  (includes 4\" X 6\" 55-watt 14V quartz halogen floodlight \u0026amp; hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-114LT-LED (***)\u003c\/td\u003e\n\u003ctd\u003eFloodlight kit for 1 1\/4 in. dia. LTB  (includes LED floodlight \u0026amp; hardware) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-U2A\u003c\/td\u003e\n\u003ctd\u003eLight bar adapter to mount a light and 2 GPS (electronics not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eBase Wedge\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-W4-7\u003c\/td\u003e\n\u003ctd\u003e4 degree wedge\/ for 7x7 radar mount base plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-W4-8\u003c\/td\u003e\n\u003ctd\u003e4 degree wedge\/ for 8x8 radar mount base plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eHinge Adapters for base plate\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-H7\u003c\/td\u003e\n\u003ctd\u003eHinge adapter\/ for 7x7 base plate\/ (fits most 5 -16 in. tall Radar Mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-H8\u003c\/td\u003e\n\u003ctd\u003eHinge adapter\/ for 8x8 base plate\/ (fits most 24 -36 in. tall Radar Mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Seaview","offers":[{"title":"Default Title","offer_id":51550327472374,"sku":"APL527249","price":175.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109670_apl527249jpg.jpg?v=1787791037"},{"product_id":"apl633797","title":"NavPod - GP1500-05 SystemPod Pre-Cut - For Humminbird 859ci\/899ci","description":"\u003ch4\u003eEnhanced Marine Navigation: NavPod GP1500-05 SystemPod for Humminbird\u003c\/h4\u003e\n\u003cp\u003eIntroducing the NavPod GP1500-05 SystemPod, expertly pre-cut for Humminbird 859ci and 899ci models. This innovative solution is designed to streamline your marine electronics setup, combining multiple devices into a single, sleek unit. Whether you're looking to integrate a radar, chartplotter, autopilot, instrument, stereo controller, or VHF mic into your sailing system, the GP1500-05 offers the perfect platform. Mounted on a Single Bend AngleGuard, it ensures a compact and elevated setup, reducing overall system height while enhancing usability and access.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed for Humminbird 859ci and 899ci models for seamless integration.\u003c\/li\u003e\n\u003cli\u003eConstructed from a custom co-extruded acrylic capped ABS material, offering unparalleled UV resistance and a high-gloss finish to match gel-coated fiberglass.\u003c\/li\u003e\n\u003cli\u003eEquipped with a double gasket system for a superior watertight seal, ensuring your electronics remain protected in the toughest offshore conditions.\u003c\/li\u003e\n\u003cli\u003eFeatures nickel chrome-plated stainless steel tamperproof screws, combining security with an elegant touch of bling.\u003c\/li\u003e\n\u003cli\u003eBenefiting from a heavy-gauge thermoforming manufacturing process for increased strength and structural rigidity.\u003c\/li\u003e\n\u003cli\u003eBacked by a 10-year warranty, highlighting our commitment to quality and lasting service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRobust Design Meets Aesthetic Appeal\u003c\/h4\u003e\n\u003cp\u003eThe GP1500-05 SystemPod not only stands up to the rigors of marine environments but also enhances the visual appeal of your helm. The high-gloss, white finish of our custom material beautifully complements the sleek lines of modern vessels, ensuring that your setup looks as good as it performs.\u003c\/p\u003e\n\u003ch4\u003eCompact Efficiency for the Modern Mariner\u003c\/h4\u003e\n\u003cp\u003eDesigned for 9.5\" Guard mounting, the GP1500-05 SystemPod optimizes space on your vessel, allowing for a cleaner, more organized helm. The ability to house multiple electronic devices in a single pod means less clutter and more efficiency, providing you with quick and easy access to all your navigation and communication tools.\u003c\/p\u003e\n\u003ch4\u003eA Legacy of Excellence\u003c\/h4\u003e\n\u003cp\u003eWith two decades of experience in crafting waterproof housings for marine electronics, NavPod's commitment to excellence is unmatched. Our meticulous design and manufacturing process, leveraging CAD software and CNC machining, ensure that every SystemPod meets the highest standards of quality and durability. Choose the GP1500-05 SystemPod for a navigation setup that combines functionality, security, and style, backed by a decade of warranty assurance.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550329405686,"sku":"APL633797","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708178_apl056422.jpg?v=1787791063"},{"product_id":"apl990963","title":"Furuno - DRS25ANXT\/4 Radar Pedestal 4' Array - 15M Cable","description":"\u003ch4\u003eIntroducing the Next Wave of Marine Navigation: DRS25ANXT\/4\u003c\/h4\u003e\n\u003cp\u003eRadar Pedestal with 4' Array \u0026amp; 15M Cable\u003c\/p\u003e\n\u003ch4\u003eEmbark on Your Voyage with Confidence\u003c\/h4\u003e\n\u003cp\u003eExperience unmatched power with NXT solid-state Radar options tailored for NavNet TZtouch2 and TZtouch3. Navigate the open seas like never before with Furuno's hallmark features such as the Target Analyzer™ which warns of potential threats and the Fast Target Tracking™ ensuring you're always aware of your surroundings.\u003c\/p\u003e\n\u003ch4\u003eTechnical Mastery at Sea\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-powered Solid State Radars: Choose from 100W (DRS12A-NXT) or 200W (DRS25A-NXT).\u003c\/li\u003e\n\u003cli\u003eCompatible with multiple antenna sizes: 3.5-foot, 4-foot, and 6-foot Open Array antennas.\u003c\/li\u003e\n\u003cli\u003eTarget Analyzer™: Automates threat assessment by highlighting dangerous targets in red.\u003c\/li\u003e\n\u003cli\u003eFast Target Tracking™: Get real-time speed and direction data of nearby objects.\u003c\/li\u003e\n\u003cli\u003eOptimized Bird Mode: Navigate towards rich fishing grounds with ease.\u003c\/li\u003e\n\u003cli\u003eIntuitive Rain Mode: Visualize and avoid storm cells for a safe journey.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEmbrace the Features\u003c\/h4\u003e\n\u003cp\u003eFrom the unparalleled Bird Mode that adjusts gain \u0026amp; sea settings for spotting flocks, to the Rain Mode which differentiates storm cells for a smooth journey - Furuno ensures safety, clarity, and ease of navigation.\u003c\/p\u003e\n\u003ch4\u003eVariations for Every Captain's Need\u003c\/h4\u003e\n\u003cp\u003eOur DRS Radars cater to diverse needs. Opt for bundled kits, which include the DRS Radar, Antenna, and signal cable. Choose your ideal fit: Models ending in \/3 are equipped with the XN10A\/3 antenna, those ending in \/4 come with the XN12A\/4 antenna, and those with \/6 are paired with the XN13A\/6 antenna.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550329602294,"sku":"APL990963","price":10090.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696959_apl109882_jpeg.jpg?v=1787791076"},{"product_id":"apl185088","title":"Garmin ECHOMAP Plus\/UHD 7in Protective Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13126-00 is a protective cover for Garmin ECHOMAP Plus and ECHOMAP UHD 7-inch chartplotters when the unit is not in use. It is sized for the 7-inch ECHOMAP families, so it is meant to fit the face and housing shape of those displays rather than being a generic sun cover.\u003c\/p\u003e\u003cp\u003eOn boats that live outdoors, get regular washdowns, or spend time trailering, a cover helps keep salt residue, spray, dust, and incidental scuffs off the screen between trips. It is a simple add-on that keeps the display looking cleaner and reduces the need to wipe the unit down before powering up.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Garmin ECHOMAP Plus and ECHOMAP UHD 7-inch chartplotters\u003c\/li\u003e\n\u003cli\u003eHelps shield the screen and front of the unit from spray, dust, and dockside bumps when the display is off\u003c\/li\u003e\n\u003cli\u003eUseful during storage, trailering, and routine cockpit rinsing after a day on the water\u003c\/li\u003e\n\u003cli\u003eProvides a consistent, snug cover fit compared with loose universal covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover matches the Garmin ECHOMAP Plus 72cv, 72sv, 73cv, 73sv, 74cv, 74sv, 75cv, 75sv, 77cv, and 77sv, as well as the Garmin ECHOMAP UHD 72cv, 72sv, 73cv, 73sv, 74cv, 74sv, 75cv, and 75sv.\u003c\/p\u003e\u003cp\u003eIf your display is a different size, a STRIKER model, or part of the ECHOMAP UHD2 lineup, confirm the cover that matches that series before ordering since the housing shape and button layout can differ.\u003c\/p\u003e\u003ch6\u003eInstallation and care\u003c\/h6\u003e\u003cp\u003eUse the cover only when the unit is not in use, and remove it before operating the chartplotter. Rinse the cover with fresh water after salty runs and let it dry before putting it back on for storage. If it gets grimy, mild soap and water is usually enough without leaving residue on the display area.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for center consoles, bay boats, and small cruisers where the display is exposed in the cockpit, as well as trailer boats that see road dust and sun between launches. It also makes sense for slip-kept boats where electronics stay mounted year-round and you want the screen covered between outings.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550330257654,"sku":"APL185088","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695851_apl033551_jpeg.jpg?v=1787791089"},{"product_id":"apl569827","title":"Navpod GP1040-46 SystemPod for Furuno GP1971F 9\" GPS GP1040-46","description":"\u003cp\u003e\u003cb\u003eNavpod GP104046 SystemPod\u003c\/b\u003e\u003c\/p\u003e\nModel: GP1040-46\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSystemPod Pre-Cut Simrad GO9 \u0026amp; GO9 XSE \/ B\u0026amp;G Vulcan 9 \u0026amp; Vulcan 9R, and space for 9.5? wide guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. \"Where you need it?when you need it\". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.\u003c\/p\u003e\n\u003cp\u003eA SystemPod is best mounted on a Single Bend AngleGuard\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eOverhall\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e20.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eUsable Face\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7.375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eMax Cutout\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550330913014,"sku":"APL569827","price":459.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1108124_apl569827jpg.jpg?v=1787791132"},{"product_id":"apl566150","title":"NAVPOD GP2173 SystemPod for Raymarine C120W\/E120W GP2173","description":"\u003cp\u003e\u003cb\u003eNAVPOD GP2173 SystemPod\u003c\/b\u003e\u003c\/p\u003e\nModel: GP2173\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSystemPod Pre-Cut for Raymarine C120W\/E120W and 2 inst. (3.6\" holes) for 12\" wide guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you ned it, when you need it. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.\u003c\/p\u003e\n\u003cp\u003eA SystemPod is best mounted on a Single Bend AngleGuard.\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eOverall\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e11.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e23.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e6.42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eUsable Face\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e9.64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e20.77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e5.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eMax Cutout\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e9.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e20.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550331404534,"sku":"APL566150","price":529.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1108788_apl566150jpg.jpg?v=1787791171"},{"product_id":"apl677500","title":"Garmin echo Flush Mount Kit, For echo 100\/101\/150\/151\/151dv\/300c\/301c\/301dv, Flush Mount Gasket, Mounting Hardware","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11681-00 is a flush mount kit for installing an echo 100, echo 150, or echo 300c directly into a flat helm or dash panel. It replaces the look of a bracket-mounted display with a cleaner, built-in fit that sits closer to the console.\u003c\/p\u003e\u003cp\u003eThe flush-mount template for this installation references 3\/8 in. (9.5 mm) and 11\/64 in. (4.5 mm) drill sizes during panel prep, so it is worth confirming you have the right bits on hand before you start cutting. The included gasket helps the bezel sit evenly against the panel for a finished look.\u003c\/p\u003e\u003cp\u003eThis is a good match for tighter helms where a bracket sticks out into the cockpit, or anywhere you want the fishfinder to stay tucked in and less exposed to bumps while docking or fishing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Garmin echo 100, echo 150, and echo 300c units for a true flush installation\u003c\/li\u003e\n\u003cli\u003eMounts the display close to the dash to reduce protrusion around the helm\u003c\/li\u003e\n\u003cli\u003eIncludes a flush mount gasket for a cleaner bezel-to-panel transition\u003c\/li\u003e\n\u003cli\u003eTemplate references 3\/8 in. (9.5 mm) and 11\/64 in. (4.5 mm) drill sizes for panel work\u003c\/li\u003e\n\u003cli\u003eHardware and instructions are included for the flush-mount install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is specific to the echo models listed and is not a universal mount. Confirm the exact model of your unit before ordering, especially if your display is part of a bundle or has a similar-looking housing.\u003c\/p\u003e\u003cp\u003eFlush mounting requires space behind the panel for the power and transducer connections, plus room for the cables to bend without being pinched. If your console has a shallow electronics pocket, check depth and cable routing before cutting the opening.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eA flush install typically involves cutting the dash opening and drilling the mounting holes, then securing the unit from the front using the supplied hardware. Dry-fit everything first, and protect nearby wiring and hoses before you start drilling.\u003c\/p\u003e\u003cp\u003eIf your dash is wood-cored or composite, seal the exposed cut edges after trimming to keep moisture out over time. Tighten fasteners evenly so the gasket seats properly without stressing the panel.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount gasket\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550331470070,"sku":"APL677500","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834648_apl677500.webp?v=1787791174"},{"product_id":"apl556590","title":"Navpod GP1500-14 SystemPod for Humminbird HELIX 7 GP1500-14","description":"\u003cp\u003e\u003cb\u003eNAVGP150014 SystemPod\u003c\/b\u003e\u003c\/p\u003e\nModel: GP1500-14\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSystemPod Pre-Cut for Humminbird HELIX 7 Series 7 and 1 inst. (3.6\" hole) for 9.5\" wide guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. \"Where you need it?when you need it\". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.\u003c\/p\u003e\n\u003cp\u003eThis SystemPod for Power can be dash mounted using the SK11 Stanchion Kit, or overhead mounted using the SK125 Stanchion Kit.\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eOverall\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4.375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eUsable Face\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e3.125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eMax Cutout\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e14.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550333599990,"sku":"APL556590","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1108778_apl556590jpg.jpg?v=1787791179"},{"product_id":"apl203588","title":"Raymarine RayNet to SeaTalk HS Adapter Cable, Female to Female, 400mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine A80160 is a 400 mm adapter cable that links a RayNet female connection to a SeaTalk HS female connection for Raymarine marine electronics networks. It is used when an existing waterproof, locking SeaTalk HS cable needs to connect into a newer RayNet multifunction display or RayNet network device.\u003c\/p\u003e\u003cp\u003eThis short adapter is especially useful during electronics refits where older G-Series, E-Wide, C-Wide, or E-Classic MFD cable runs are already installed behind the helm. At about 15 inches long, it gives enough reach for a clean transition without adding unnecessary cable slack inside a console, electronics box, or chart table installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e400 mm cable length, approximately 15 inches, for close-range network transitions behind the helm or inside an electronics cabinet.\u003c\/li\u003e\n\u003cli\u003eRayNet female to SeaTalk HS female configuration for connecting legacy Raymarine SeaTalk HS cabling to newer RayNet equipment.\u003c\/li\u003e\n\u003cli\u003eSupports reuse of existing waterproof, locking SeaTalk HS cables from compatible Raymarine display networks.\u003c\/li\u003e\n\u003cli\u003eSuitable for Raymarine G-Series, E-Wide, C-Wide, and E-Classic MFD upgrade paths where the installed network cable needs to remain in place.\u003c\/li\u003e\n\u003cli\u003eHelps keep network routing tidy during refits by avoiding a full cable replacement when the existing SeaTalk HS run is still serviceable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter belongs in a Raymarine Ethernet networking layout, not in a NMEA 2000 backbone, power circuit, or transducer connection. It is intended for RayNet and SeaTalk HS network cabling, so the connector style at each end should be checked against the display, network switch, or existing installed cable before ordering.\u003c\/p\u003e\u003cp\u003eThe female-to-female layout matters. It is made for situations where the boat already has a waterproof, locking SeaTalk HS cable in place and the new equipment side uses RayNet. For many refits, that means less time pulling cable through tight helm spaces, overhead liners, or cable conduits.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eInstall the adapter where it will not be strained by vibration, steering movement, hatch access, or service work around the helm. The short length is best used as a transition lead near the display or network device, with the existing SeaTalk HS cable and the RayNet equipment both supported so the connectors are not carrying cable weight.\u003c\/p\u003e\u003cp\u003eKeep the connection area dry and accessible where possible, even when using waterproof locking network cables. A little extra service loop and proper cable support can make future display removal, software service, or network troubleshooting much easier.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boat owners, installers, and refit yards updating Raymarine displays while keeping compatible SeaTalk HS cabling already run through the vessel. It is most useful on helm upgrades, flybridge refits, and navigation station work where network compatibility is the main issue rather than cable length.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":51550339989750,"sku":"APL203588","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323328_apl203588.webp?v=1787791387"},{"product_id":"apl420543","title":"Veratron EngineBox - Single Engine A2C1824820001","description":"\u003cp\u003e\u003cstrong\u003eEngineBox - Single Engine\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. \u003c\/p\u003e\n\u003cp\u003eThe EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog to NMEA 2000® gateway \u003c\/li\u003e\n\u003cli\u003eJ1939 to NMEA 2000® gateway \u003c\/li\u003e\n\u003cli\u003e2 Models for single engine and dual engine configurations \u003c\/li\u003e\n\u003cli\u003eCompact design \u003c\/li\u003e\n\u003cli\u003eStatus LED \u003c\/li\u003e\n\u003cli\u003eOperating temperature range -40°C\/+85°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x J1939 (2x J1939 Dual Engine) \u003c\/li\u003e\n\u003cli\u003e1x M12 5 pins NMEA 2000® \u003c\/li\u003e\n\u003cli\u003e1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model) \u003c\/li\u003e\n\u003cli\u003e4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model) \u003c\/li\u003e\n\u003cli\u003e2x Inputs 4–20 mA \u003c\/li\u003e\n\u003cli\u003e1x Input 0–5 V (2 inputs with Dual Engine Model)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIn the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngine Cable\u003c\/li\u003e\n\u003cli\u003eCable Harness\u003c\/li\u003e\n\u003cli\u003eSafety Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Sold as an Individual \u003c\/p\u003e\n\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Veratron","offers":[{"title":"Default Title","offer_id":51550345560310,"sku":"APL420543","price":447.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1106373_apl420469jpg.jpg?v=1787791653"},{"product_id":"apl607268","title":"Furuno - NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse","description":"\u003ch4\u003eUnleash the Ocean's Potential with NavNet Power Cable Assembly\u003c\/h4\u003e\n\u003c!-- General Description --\u003e\n\u003ch4\u003eSailing Into Uncharted Territory: The Basics\u003c\/h4\u003e\n\u003cp\u003eIf you're tired of power issues limiting your marine adventures, it's time to experience the reliable and robust NavNet Power Cable Assembly. Ideal for any sea-faring vessel, this cable assembly ensures that your boat's essential systems remain operational at all times. Coming in a standard length of 5 meters with a 3-pin design, it's suitable for various electronic applications. But that's not all; it also includes a 20 Amp fuse to safeguard against electrical hazards.\u003c\/p\u003e\n\u003c!-- Technical Specifications --\u003e\n\u003ch4\u003eAnchoring Technical Excellence: The Nitty-Gritty\u003c\/h4\u003e\n\u003cp\u003eOur NavNet Power Cable Assembly is more than just a cable. It's engineered with advanced electrical specifications, designed to provide a seamless and stable power supply. With its 3-pin configuration, it offers superior compatibility and is built to withstand the harsh marine environment.\u003c\/p\u003e\n\u003c!-- Product Dimensions --\u003e\n\u003ch4\u003eSmooth Sailing Dimensions: The Fit and Feel\u003c\/h4\u003e\n\u003cp\u003eGeneral Dimensions: 5 meters in length, 1 inch in diameter\u003c\/p\u003e\n\u003c!-- Finishes --\u003e\n\u003ch4\u003eStylish Yet Functional: Finishes That Last\u003c\/h4\u003e\n\u003cp\u003eOur NavNet Power Cable Assembly is not just about function; it's also about style. Choose from a range of durable and weather-resistant finishes that add an aesthetic appeal to your vessel.\u003c\/p\u003e\n\u003c!-- Highlights --\u003e\n\u003ch4\u003eNavigational Highlights: Why NavNet Stands Out\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUninterrupted power supply\u003c\/li\u003e\n\u003cli\u003eAdvanced 3-pin configuration\u003c\/li\u003e\n\u003cli\u003eComes with a 20 Amp fuse for added safety\u003c\/li\u003e\n\u003cli\u003e5-meter length offers flexibility in installation\u003c\/li\u003e\n\u003cli\u003eWeather-resistant finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- Variations List --\u003e\n\u003ch4\u003eThe Ocean of Choices: NavNet's Varied Offerings\u003c\/h4\u003e\n\u003cp\u003eFor those who need something a little different, we offer a variety of product variations to suit your unique needs. Whether it's a shorter cable length, different pin configurations, or varying Amp fuses, we have something for everyone.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550345658614,"sku":"APL607268","price":210.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696789_apl607268_jpeg.jpg?v=1787791666"},{"product_id":"apl187390","title":"NavPod - GP2033 SailPod Precut - For Furuno MFD12, For 12\" Guard","description":"\u003ch4\u003eUnparalleled Protection for Your Furuno MFD12: NavPod GP2033 SailPod\u003c\/h4\u003e\n\u003cp\u003eEmbark on your maritime adventures with confidence, thanks to the NavPod GP2033 SailPod, specifically designed for the Furuno MFD12. Crafted for durability and aesthetics, this SailPod ensures your marine electronics are protected under the most demanding conditions. Whether facing the relentless sun, corrosive saltwater, or pounding waves, the GP2033 provides an impenetrable shield for your Furuno MFD12, all while keeping it within easy reach and view.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-Cut for the perfect fit of Furuno MFD12, ensuring a seamless installation.\u003c\/li\u003e\n\u003cli\u003eDual-Seal System combining an outer silicone seal with an internal urethane foam gasket, offering unmatched protection against water ingress.\u003c\/li\u003e\n\u003cli\u003eConstructed with polished stainless steel, the tamperproof fasteners maintain a clean look and secure environment for your electronics.\u003c\/li\u003e\n\u003cli\u003eEnhances the accessibility and visibility of your navigation equipment, making it easier to monitor and control your journey.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEngineered for Endurance\u003c\/h4\u003e\n\u003cp\u003eThe GP2033 SailPod is not just another accessory; it's a critical investment in the longevity and functionality of your marine electronics. The dual-seal system guarantees that your Furuno MFD12 is safeguarded against the harshest marine elements, ensuring operational reliability when you need it most. The memory-resistant urethane foam gasket retains its shape and effectiveness over time, providing a lasting seal.\u003c\/p\u003e\n\u003ch4\u003eStrategic Installation and Aesthetics\u003c\/h4\u003e\n\u003cp\u003eWith the NavPod GP2033, your Furuno MFD12 doesn't just get the protection it deserves; it's also positioned for optimal usability. The pre-cut design allows for a flush and clean installation, integrating seamlessly with your vessel's aesthetic. The polished stainless steel fasteners not only secure your device but also add a touch of elegance to your helm station.\u003c\/p\u003e\n\u003ch4\u003eSpecifications at a Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: Specifically designed for Furuno MFD12\u003c\/li\u003e\n\u003cli\u003eSealing: Outer silicone seal with internal urethane foam gasket\u003c\/li\u003e\n\u003cli\u003eMaterial: High-quality, durable construction with polished stainless steel fasteners\u003c\/li\u003e\n\u003cli\u003eInstallation: Pre-cut for easy and precise fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the NavPod GP2033 SailPod for your Furuno MFD12 and sail with the assurance that your electronics are well-protected, accessible, and elegantly displayed. This isn't just a protective casing; it's a critical companion for your maritime adventures.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550345986294,"sku":"APL187390","price":499.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708091_apl187390.jpg?v=1787791678"},{"product_id":"apl508326","title":"Furuno - NMEA2000 Cable with 6M Micro F-Drop","description":"\u003ch4\u003eDive Deep Into Connectivity: NMEA2000 Cable\u003c\/h4\u003e\n\u003cp\u003eUnlock marine connectivity like never before with our NMEA2000 Cable featuring a 6M Micro F-Drop. Engineered for impeccable performance, this cable offers a robust connection that's essential for marine applications.\u003c\/p\u003e\n\u003ch4\u003eStandout Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNMEA2000 Cable designed for high-performance\u003c\/li\u003e\n\u003cli\u003eExtended 6 Meter Micro F-Drop for optimal reach\u003c\/li\u003e\n\u003cli\u003eSingle-ended design for straightforward connections\u003c\/li\u003e\n\u003cli\u003eIncludes 1 Connector for seamless integration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550349558006,"sku":"APL508326","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696811_apl508326.png?v=1787791816"},{"product_id":"apl072624","title":"Navpod GP2500-40 SystemPod for Simrad GO7-XSR GP2500-40","description":"\u003cp\u003e\u003cb\u003eNAVGP250040 SystemPod\u003c\/b\u003e\u003c\/p\u003e\nModel: GP2500-40\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSystemPod Pre-Cut for Furuno GP1871F 7? Multi Touch GPS \/ Chartplotter \/ Fish Finder and space, for 12? wide guard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. \"Where you need it?when you need it\". SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.\u003c\/p\u003e\n\u003cp\u003eA SystemPod is best mounted on a Single Bend AngleGuard.\u003c\/p\u003e\n\u003cp\u003eStructural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.\u003c\/p\u003e\n\u003cp\u003eWaterproof Seal — All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to \"compression set\" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.\u003c\/p\u003e\n\u003cp\u003eNickel Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!\u003c\/p\u003e\n\u003cp\u003eCommitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eOverall\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e16.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e4.375\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eUsable Face\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e3.125\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd colspan=\"2\"\u003e\u003cb\u003eMax Cutout\u003c\/b\u003e\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e14.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550352441590,"sku":"APL072624","price":379.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1094629_apl072624jpg.jpg?v=1787791906"},{"product_id":"apl587839","title":"Garmin echo U.S. AC Charger, For Portable echo Kit AGM Battery","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11849-10 is an AC charger for the AGM battery used with Garmin portable echo kit bundles, letting you top off the battery from a standard U.S. wall outlet before heading out.\u003c\/p\u003e\u003cp\u003eIt charges the battery directly instead of tying into your boat’s electrical system, which is handy when the fishfinder moves between boats, rides in a kayak crate, or lives in a portable case for dockside setup.\u003c\/p\u003e\u003cp\u003eFor best results on the water, keep the battery charged between trips and store the charger where it stays dry and out of salt air.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCharges the AGM battery included with Garmin portable echo kit packages from a U.S. AC outlet\u003c\/li\u003e\n\u003cli\u003eDirect battery connection for simple charging off the boat, no wiring into the vessel required\u003c\/li\u003e\n\u003cli\u003eCommonly used with echo 101, 150, 151, 151dv, 201, 301c, 301dv, 501c, 551c, and the STRIKER 4 portable bundle\u003c\/li\u003e\n\u003cli\u003eUseful for keeping a portable sonar battery ready for short-notice launches and travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis charger is intended for the AGM battery supplied with Garmin portable echo kit setups. If your kit uses a different battery type or a different charging connector, match the battery and plug style before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the charger lead to the AGM battery first, then plug the adapter into the wall outlet. When you are finished charging, unplug from the outlet before disconnecting from the battery.\u003c\/p\u003e\u003ch6\u003eCharging notes for marine use\u003c\/h6\u003e\u003cp\u003eUse the charger in a dry area with ventilation, not in a damp bilge or where spray can reach it. If the charger lead or battery contacts get salty, wipe them down before packing the portable kit back into its case.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550352703734,"sku":"APL587839","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695743_apl587839_jpeg.jpg?v=1787791923"},{"product_id":"apl762359","title":"NavPod - GP2050-19 SailPod Pre-Cut - For Garmin GPSMAP 7410, 7410xsv, 7610, 7610xsv, For 12\" Wide Guard","description":"\u003ch4\u003eSeamless Flush-Mounting for Your Garmin Display on Sailing Vessels\u003c\/h4\u003e\n\u003cp\u003eExperience a superior helm aesthetic and unparalleled visibility with the NavPod GP2050-19 SailPod. This innovative pod solution is meticulously designed for flush-mounting your Garmin GPSMAP® 7410\/7410xsv\/7610\/7610xsv display on sailing vessels, ensuring optimal viewing angles and a clean, professional look.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean and Elegant Design: Achieve a sleek, built-in appearance by replacing bulky brackets with the SailPod's flush-mounted design, seamlessly integrating your display into your helm.\u003c\/li\u003e\n\u003cli\u003eUncompromised Views: The SailPod's optimized positioning ensures you have a clear and unobstructed view of your display, crucial for making informed decisions while navigating.\u003c\/li\u003e\n\u003cli\u003eEnhanced Protection: The SailPod safeguards your electronics from the harsh marine environment, protecting them from saltwater spray, UV rays, and physical impact.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Built with a custom co-extruded acrylic capped ABS material and featuring thicker gauge materials, the SailPod offers superior strength and rigidity to withstand the challenges of the sea.\u003c\/li\u003e\n\u003cli\u003eWatertight Integrity: The double-gasket seal ensures your electronics are protected from the elements, even in the most demanding offshore conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCrafted for Sailing Enthusiasts\u003c\/h4\u003e\n\u003cp\u003eThe NavPod GP2050-19 SailPod is specifically designed for mounting on sailing vessels, taking into account the unique needs and considerations of sailboat helms. Its compact design and versatile mounting options allow for optimal placement without compromising valuable console space.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550354604278,"sku":"APL762359","price":449.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708363_apl762359.jpg?v=1787791963"},{"product_id":"apl937408","title":"Scanstrut ScanPod DeckPod f\/Displays Up To 15\" SPD-15-W","description":"\u003cp\u003e\u003cstrong\u003eScanPod DeckPod for Displays Up To 15\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ScanPod range offers maximum choice and versatility for installing all leading brands of instruments and screens.\u003c\/p\u003e\n\u003cp\u003eDesigned for all leading brands and models of displays. Our Deck Pod allows you to install your MFD virtually on any flat surface on board. This allows you to have your display in the prime position while out sailing on your powerboat or RIB. With the pull of a lever, the intuitive design gives you a 360-degree viewing angle to make the most of what your display has to offer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSwivel \u0026amp; Tilt Base - One-handed quick-release action. simply release the lever, swivel, and tilt to suit your requirements before locking back into position.\u003c\/li\u003e\n\u003cli\u003eBest Viewing Angle - An adjustable ball joint allows a range of movement and multiple mounting angles.\u003c\/li\u003e\n\u003cli\u003eAdded Strength - Inner bracing plate secures the deck pod base to the pod and gives increased rigidity to the assembly eliminating potential damage from shock and vibration.\u003c\/li\u003e\n\u003cli\u003eOverhead Mounting - Deck Pod models can be overhead mounted. refer to our fit my device tab on our website.\u003c\/li\u003e\n\u003cli\u003eHassle-Free Install \u0026amp; Service - Fixings fit from back to front cutting their threads into injection molded abs inserts designed into the Pod front. this design allows for a quick and safe install and repeats servicing.\u003c\/li\u003e\n\u003cli\u003eIncreased Protection - Deck Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.\u003c\/li\u003e\n\u003cli\u003eSupplied Uncut - As standard, you will receive your Scanpod. for a small charge factory cutting service is available.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scanstrut","offers":[{"title":"Default Title","offer_id":51550360568054,"sku":"APL937408","price":1035.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1117391_apl937408jpg.jpg?v=1787791984"},{"product_id":"apl191268","title":"Digital Yacht - Navlink 2 NMEA 2000 WIFI Gateway","description":"\u003ch4\u003eSeamless NMEA 2000 to Wi-Fi Integration for Marine Navigation\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eDigital Yacht NavLink 2\u003c\/strong\u003e is a compact and powerful NMEA 2000 to Wi-Fi server, designed to provide seamless access to navigation data on smartphones, tablets, and PCs. This easy-to-install gateway connects directly to the NMEA 2000 network and is self-powered from the data bus, allowing for rapid setup without the need for additional wiring.\u003c\/p\u003e\u003cp\u003eIdeal for modern marine navigation, the NavLink 2 enables real-time access to AIS, navigation, and instrument data through a wide range of popular marine apps. Whether used as a dedicated wireless server or integrated into an existing Wi-Fi network, it ensures reliable data distribution to up to seven connected devices.\u003c\/p\u003e\u003ch4\u003eAdvanced Connectivity and Compatibility\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNavLink 2\u003c\/strong\u003e is engineered for versatility, supporting both TCP\/IP and UDP connection modes to accommodate various networking preferences. It is fully compatible with industry-leading marine applications, including \u003cstrong\u003eiNavX, TimeZero, Weather 4D, Navionics, SailGrib, NavLink, iSailor, SeaPilot, and AquaMap\u003c\/strong\u003e. This flexibility ensures seamless integration with your preferred navigation tools.\u003c\/p\u003e\u003ch4\u003eSecure and User-Friendly Operation\u003c\/h4\u003e\u003cp\u003eDesigned with security in mind, the NavLink 2 features a \u003cstrong\u003epassword-protected\u003c\/strong\u003e interface, preventing unauthorized access to your vessel’s data. The \u003cstrong\u003eintuitive web-based interface\u003c\/strong\u003e allows for easy configuration and monitoring, while built-in \u003cstrong\u003ediagnostic data display mode and LED status lights\u003c\/strong\u003e provide real-time system feedback for optimal performance.\u003c\/p\u003e\u003ch4\u003eHigh-Performance Wireless Transmission\u003c\/h4\u003e\u003cp\u003eEquipped with an \u003cstrong\u003einternal high-gain Wi-Fi antenna\u003c\/strong\u003e, the NavLink 2 delivers stable, high-speed data transfer with \u003cstrong\u003esuper-fast 230KBs operation\u003c\/strong\u003e. For developers and advanced users, an \u003cstrong\u003eoptional raw data mode\u003c\/strong\u003e allows for deeper customization and enhanced functionality.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDirect NMEA 2000 to Wi-Fi connectivity\u003c\/li\u003e\n\u003cli\u003eSelf-powered from the NMEA 2000 bus for quick installation\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, Linux, Mac OS, iOS, and Android\u003c\/li\u003e\n\u003cli\u003eSupports up to 7 connected devices simultaneously\u003c\/li\u003e\n\u003cli\u003eFunctions as a standalone Wi-Fi server or integrates into an existing network\u003c\/li\u003e\n\u003cli\u003eWorks with leading marine navigation and AIS apps\u003c\/li\u003e\n\u003cli\u003eSecure, password-protected access\u003c\/li\u003e\n\u003cli\u003eWeb-based interface for easy configuration\u003c\/li\u003e\n\u003cli\u003eLED status indicators for real-time diagnostics\u003c\/li\u003e\n\u003cli\u003eOptional raw data mode for developers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIncluded Components\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDigital Yacht NavLink 2 NMEA 2000 Wi-Fi Gateway\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNMEA 2000 cable\u003c\/strong\u003e for seamless integration into the vessel's network\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis compact and efficient NMEA 2000 Wi-Fi server is an essential addition for modern boaters looking to enhance their navigation experience with real-time, wireless data access.\u003c\/p\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":51550361977078,"sku":"APL191268","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834318_apl191268.jpg?v=1787792035"},{"product_id":"apl647125","title":"Seaview PMA57M1 5\" Mount Aft Rake Requires Plate White PMA57M1","description":"\u003cp\u003eThe 5\" tall Seaview aft leaning mount is for Open Array Radars, Closed Dome Radars and Satdomes. The oval hollow mast section allows for easy cable management. The small 7\"x7\" foot print design is a great solution for limited space. This modular mount is light bar compatible. This modular mount is light bar compatible. Numerous accessories are also available for this mount such as wedges, hinges, spreaders, lightbars and floodlights. *Please note that a Top Plate is required (sold separately)*\u003c\/p\u003e\n\u003ctable border=\"0\" cellspacing=\"0\" cellpadding=\"0\" width=\"100%\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding-bottom: 10px; font-family: Helvetica, Arial, sans-serif; letter-spacing: -2px; color: #767572; font-size: 25px; font-weight: bold\"\u003eFeatures:\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"line-height: 130%; font-family: Helvetica, Arial, sans-serif; color: #767572\" valign=\"top\"\u003e\n\u003cul\u003e\n\u003cli\u003eNo more unwanted visible holes in the mounting plate!\u003c\/li\u003e\n\u003cli\u003eEasy 3 step modular system.\u003c\/li\u003e\n\u003cli\u003eAft, forward, vertical and dual mount designs..\u003c\/li\u003e\n\u003cli\u003eEasily add on accessories such as lightbars, spreader kits, hinges, wedges and much more!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse\" width=\"100%\" bgcolor=\"#C0D5D8\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cfont color=\"#FF0000\" size=\"4\"\u003e\u003cb\u003eStep 1\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#FF0000\" size=\"4\"\u003e\u003cb\u003eSelect Mount Type this will be the base for the system\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eClosed Dome Radar, Small Satdomes (16\" or smaller) \u0026amp; Cameras\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-107-M1\u003c\/td\u003e\n\u003ctd\u003e10\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-107-M1\u003c\/td\u003e\n\u003ctd\u003e10\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-167-M1\u003c\/td\u003e\n\u003ctd\u003e16\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-247-M1\u003c\/td\u003e\n\u003ctd\u003e24\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-367-M1\u003c\/td\u003e\n\u003ctd\u003e36\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM5-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM12-M1\u003c\/td\u003e\n\u003ctd\u003e12\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAM18-M1\u003c\/td\u003e\n\u003ctd\u003e18\" Modular Mnt\/ Vertical \/ 8\" Rnd base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eOpen Array Radar\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMF-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ FWD raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eLarge Satdomes (18\" - 24\")\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-57-M1\u003c\/td\u003e\n\u003ctd\u003e5\" Modular Mnt\/ AFT raked \/ 7 x 7 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-1210-M2\u003c\/td\u003e\n\u003ctd\u003e12\" Modular Mnt\/ AFT raked \/ 10 x 10 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePMA-1810-M2\u003c\/td\u003e\n\u003ctd\u003e18\" Modular Mnt\/ AFT raked \/ 10 x 10 base plate \/ Light bar compatible \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eDual Mount \u0026amp; Arches\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM1-M2\u003c\/td\u003e\n\u003ctd\u003e12.5\" Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM124-M2 (***)\u003c\/td\u003e\n\u003ctd\u003e32.5\" Extended Dual Mount pre-drilled for most closed dome Radars. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM2-M2\u003c\/td\u003e\n\u003ctd\u003e22.5\" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePMA-DM3-M2\u003c\/td\u003e\n\u003ctd\u003e28\" Dual Mount pre-drilled for up to 4.5 ft. Open Array Radar. Top for Satellite domes \/ Top plate required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" style=\"border-collapse: collapse\" border=\"1\" bgcolor=\"#83BFD1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eStep 2\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eChoose Top Plate\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eRadar (closed dome \u0026amp; open array 4'-6')\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eADA-R1\u003c\/td\u003e\n\u003ctd\u003eModular plate for almost ALL closed dome and open array radars (Confirm proper fit with ref guide)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eADA-R2\u003c\/td\u003e\n\u003ctd\u003eModular plate for 24\" JRC \/ Lowrance 2400HD \/ Northstar \u0026amp; Simrad DX64S Domes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eSatdome\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S1\u003c\/td\u003e\n\u003ctd\u003e\n\u003csup\u003e1 \u003c\/sup\u003eModular plate for KVH M1\/M2\/M3 , Intellian i1\/i2\/i3, Raymarine 33\/37STV, SeaKing 1500\/1800-HD, SeaTel ST14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S2\u003c\/td\u003e\n\u003ctd\u003eModular plate for KVH M5\/M7, Intellian i4\/i6\/d6, Raymarine 45\/60STV, SeaTel C18\/C24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S3\u003c\/td\u003e\n\u003ctd\u003e\n\u003csup\u003e2\u003c\/sup\u003eModular plate for KVH M1, Intellian i1\/i2, Raymarine 33STV, SeaKing 1500\/1800-HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-S4\u003c\/td\u003e\n\u003ctd\u003eModular plate for ALL FB150 \u0026amp; FB250 domes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eADA-F1\u003c\/td\u003e\n\u003ctd\u003eModular plate for FLIR M or Ray T series thermal cameras\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" bgcolor=\"#C0D5D8\" style=\"border-collapse: collapse\" border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eStep 3\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#FF0000\"\u003eChoose Optional Accessories\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eLight \/ GPS Bars\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e\u003cfont size=\"4\" color=\"#000080\"\u003e(Light bar top accessory required, see below)\u003c\/font\u003e\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-R\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for closed dome radar \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-OA\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for open array radar up to 4.5 ft. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-OA6\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for open array radar at 6 ft. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-S\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for 18\" or smaller satdomes \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-S24\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for 24\" satdomes \/ folds over 90 deg. \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eLTB-SF (***)\u003c\/td\u003e\n\u003ctd\u003e1 1\/4\" Light bar for FLIR M or Raymarine T series thermal camera and light \/ Must pick a LTB TOP below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\" size=\"4\"\u003e\u003cb\u003eLight Bar Tops\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\" size=\"4\"\u003e\u003cb\u003e(LTB TOP required with light bars above)\u003c\/b\u003e\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-U\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Standard 1-14 thread for GPS or similar\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-U1A\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Universal Light bar top for mounting your own light and or GPS\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTBP-1197\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Perko 1197 light with 7' of wire \/ USCG approved for boats up to 20 meters (65.6 ft) in length.\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTBA-7800\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Attwood LED 7800 ser. light with 7' of wire \/ USCG approved for boats up to 20 meters (65.6 ft).\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cfont color=\"#000080\"\u003eLTB-BOX\u003c\/font\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cfont color=\"#000080\"\u003e(LTB TOP) Universal box top for All-round, Masthead \u0026amp; Stern (lights not included)\u003c\/font\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eLight Bar Accessories\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-114LT-DLX\u003c\/td\u003e\n\u003ctd\u003eFloodlight kit for 1 1\/4 in. dia. LTB (includes 4\" X 6\" 55-watt 14V quartz halogen floodlight \u0026amp; hardware)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-114LT-LED (***)\u003c\/td\u003e\n\u003ctd\u003eFloodlight kit for 1 1\/4 in. dia. LTB (includes LED floodlight \u0026amp; hardware) \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-U2A\u003c\/td\u003e\n\u003ctd\u003eLight bar adapter to mount a light and 2 GPS (electronics not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003eBase Wedge\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-W4-7\u003c\/td\u003e\n\u003ctd\u003e4 degree wedge\/ for 7x7 radar mount base plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-W4-8\u003c\/td\u003e\n\u003ctd\u003e4 degree wedge\/ for 8x8 radar mount base plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003e\u003cb\u003eHinge Adapters for base plate\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-H7\u003c\/td\u003e\n\u003ctd\u003eHinge adapter\/ for 7x7 base plate\/ (fits most 5 -16 in. tall Radar Mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"160\"\u003ePM-H8\u003c\/td\u003e\n\u003ctd\u003eHinge adapter\/ for 8x8 base plate\/ (fits most 24 -36 in. tall Radar Mounts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Seaview","offers":[{"title":"Default Title","offer_id":51550362599670,"sku":"APL647125","price":214.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1111549_apl647125jpg.jpg?v=1787792047"},{"product_id":"apl087301","title":"NavPod - PED4401 PedestalPod Pre-Cut - For Garmin GPSMAP 7 Series, Carbon Black","description":"\u003ch4\u003eEnhanced Marine Navigation with NavPod PED4401 PedestalPod\u003c\/h4\u003e\n\u003cp\u003eIntroducing the NavPod PED4401 PedestalPod, a pre-cut mounting solution engineered for the Garmin GPSMAP® series including 7407, 7407xsv, 7607, 7607xsv, 720, 721, 740s, 721xs, 741xs, 70s, and 70dv. Boasting a sleek carbon black finish, this PedestalPod surpasses traditional bracket mounting in durability, security, and aesthetics. Designed to withstand the harshest marine environments, it ensures your fishfinder\/chartplotter remains protected and accessible. The PedestalPod elevates your device 20\"\" off the deck at a 45° angle near the bow, optimizing visibility and ease of use while fishing or navigating.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically pre-cut for a wide range of Garmin GPSMAP® models for a perfect fit.\u003c\/li\u003e\n\u003cli\u003eRobust double gasket system for an exceptional watertight seal, enhancing the longevity of your electronics.\u003c\/li\u003e\n\u003cli\u003eSturdy and secure, offering both protection from the elements and theft with tamperproof screws and a security wrench.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty, powder-coated aluminum pedestal tube allows for internal cable management, presenting a clean and organized look.\u003c\/li\u003e\n\u003cli\u003ePositions your device optimally for ease of viewing and operation, enhancing your fishing and navigation experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDurable Construction for Reliable Performance\u003c\/h4\u003e\n\u003cp\u003eThe PED4401 PedestalPod is constructed with marine-grade materials, including a double gasket system that effectively keeps spray and moisture away from your device's electrical connections. This dedication to quality ensures that your marine electronics are not only secure but also reliably functional over time, regardless of exposure to sunlight, saltwater, or physical impacts.\u003c\/p\u003e\n\u003ch4\u003eStreamlined Installation and Operation\u003c\/h4\u003e\n\u003cp\u003eFeaturing a 3” diameter pedestal tube with a 5” round base, the PED4401 offers a substantial space for running wires and connectors internally, facilitating a sleek and uncluttered setup. Its strategic design positions your fishfinder\/chartplotter at an ideal height and angle, making it easier than ever to adjust settings or switch views without distraction from your marine adventure.\u003c\/p\u003e\n\u003ch4\u003eUltimate Protection and Aesthetic Appeal\u003c\/h4\u003e\n\u003cp\u003eChoose the NavPod PED4401 PedestalPod for its unmatched blend of functionality, security, and style. This mounting solution not only provides superior protection for your Garmin GPSMAP® series but also enhances the overall look of your navigation station with its elegant carbon black finish. Secure your marine electronics with the PED4401 and navigate with confidence and ease.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51550364336374,"sku":"APL087301","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708544_apl024443.jpg?v=1787792099"},{"product_id":"apl363071","title":"Garmin Marine and Cart Adjustable Handheld GPS Mount, For Approach Colorado Oregon and Dakota Series, Flat Surface","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11031-00 is an adjustable handheld mount that fastens to a flat surface so a compatible Garmin handheld GPS or satellite communicator stays in a consistent spot on board or in a vehicle.\u003c\/p\u003e\u003cp\u003eIt gives you a fixed place for the device when the boat is moving, with an angle you can set for your helm position to keep the screen readable. Packaged weight is about 0.22 lb.\u003c\/p\u003e\u003cp\u003eMounting screws are not included, and when it is used with an inReach Mini 2, an additional Spine Mount Adapter is required.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlat-surface mount for keeping a compatible Garmin handheld within reach at the helm, nav station, or dash\u003c\/li\u003e\n\u003cli\u003eAdjustable angle to aim the screen where you can see it without holding the device\u003c\/li\u003e\n\u003cli\u003eWorks in marine and vehicle installs when you want the same handheld in a fixed location\u003c\/li\u003e\n\u003cli\u003eMounting screws are not included so you can match fasteners to your surface and corrosion requirements\u003c\/li\u003e\n\u003cli\u003eRequires a Spine Mount Adapter when used with inReach Mini 2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is used across many Garmin handheld families, including handheld GPS and satellite communicators. Fit depends on the device using the compatible handheld mounting interface, so it is worth confirming your exact model before drilling.\u003c\/p\u003e\u003cp\u003eIf you are mounting an inReach Mini 2, plan on the additional Spine Mount Adapter so the device locks in correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eChoose a spot with a clear viewing angle and enough clearance to dock and remove the handheld, such as the helm console, inside a pilothouse, or on a dash panel. On thin fiberglass or plastic, through-bolting with a backing plate helps the mount stay tight in vibration and chop.\u003c\/p\u003e\u003cp\u003eUse marine sealant around fastener holes where water can reach the backside of the panel, and select stainless fasteners that match your environment since hardware is not included.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis mount makes sense for boats that run a handheld as a primary navigator on a small console, as a backup GPS in the cockpit, or as a removable unit shared between the boat and tow vehicle. It also suits fishing and tender setups where a handheld needs a steady, hands-free position while underway.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550364434678,"sku":"APL363071","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697248_apl363071_jpeg.jpg?v=1787792110"},{"product_id":"apl139182","title":"Raymarine RS150 GPS Receiver, 72-Channel, 10Hz, SeaTalkng, NMEA 2000 Compatible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine RS150 is a self-contained GPS\/GNSS receiver for feeding accurate position data into Raymarine navigation systems. It uses a 72-channel receiver with fast 10 Hz position updates, making it a practical choice when the boat needs a dedicated remote GPS sensor rather than relying only on the receiver built into a display.\u003c\/p\u003e\u003cp\u003eThe unit connects through SeaTalkng and can also be used with NMEA 2000 networks when the correct DeviceNet adapter cable is fitted. It runs from a 12 V dc SeaTalkng network, draws only 30 mA with a 1 LEN load, and supports SBAS corrections from WAAS, EGNOS, MSAS and GAGAN for improved position accuracy where those services are available.\u003c\/p\u003e\u003cp\u003eWith an IPx6 waterproof rating, a low-profile body, and support for surface or pole mounting depending on the selected configuration, the RS150 suits exposed electronics areas such as hardtops, arches, pilothouse roofs, consoles and other clear-sky mounting points on cruising, fishing and sailing vessels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e72-channel GPS\/GNSS receiver for remote position sensing on Raymarine navigation systems.\u003c\/li\u003e\n\u003cli\u003e10 Hz position updates help chartplotters, instruments and networked displays react smoothly as the vessel moves.\u003c\/li\u003e\n\u003cli\u003eSBAS support includes WAAS, EGNOS, MSAS and GAGAN for differential GPS correction in supported regions.\u003c\/li\u003e\n\u003cli\u003eGLONASS compatibility adds another satellite constellation for better positioning coverage.\u003c\/li\u003e\n\u003cli\u003eSeaTalkng connection for straightforward integration with compatible Raymarine networks.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 compatibility is available when used with a suitable DeviceNet adapter cable.\u003c\/li\u003e\n\u003cli\u003e12 V dc operation from the SeaTalkng network, with a 9 V dc to 16 V dc operating range and protection up to 32 V dc.\u003c\/li\u003e\n\u003cli\u003eLow power draw of 30 mA, equal to 1 LEN on an NMEA 2000 network.\u003c\/li\u003e\n\u003cli\u003eIPx6 waterproof rating helps the receiver handle spray and washdown exposure in normal marine use.\u003c\/li\u003e\n\u003cli\u003eCompact housing measures 108.48 mm in diameter and 26.61 mm high for a clean, low-profile installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe RS150 is offered in two configurations. Both versions refer to the same RS150 GPS\/GNSS receiver family, with the mounting package being the key difference between them.\u003c\/p\u003e\u003cp\u003eThe standard configuration is set up for low-profile surface mounting, while the pole-mount version adds the hardware needed when the receiver needs to sit higher or in a position with a clearer view of the sky.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eE70310: Configuration Standard. This version suits installations where the receiver can be surface mounted on a hardtop, deck, console, arch or other location with a clear sky view.\u003c\/li\u003e\n\u003cli\u003eT70327: Configuration With Pole Mounting Kit. This version includes the pole mounting kit for installations where raising the antenna helps avoid shadows from rails, canvas, electronics boxes or other topside equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe RS150 is made for Raymarine navigation networks using SeaTalkng. In a typical installation, it shares position data with compatible Raymarine multifunction displays and instruments through the onboard network, so the display does not need to be the only source of GPS position.\u003c\/p\u003e\u003cp\u003eFor mixed electronics systems, the receiver can also be integrated with NMEA 2000 equipment when the correct adapter cable is used. This matters on boats where chartplotters, instruments, autopilot components or other devices need a consistent GPS\/GNSS source across the network.\u003c\/p\u003e\u003ch6\u003eMounting and installation\u003c\/h6\u003e\u003cp\u003eMount the receiver where it has the clearest practical view of the sky and away from equipment that could block satellite reception. Common locations include the cabin top, flybridge hardtop, radar arch, pilothouse roof or a dedicated electronics pole.\u003c\/p\u003e\u003cp\u003eThe low-profile standard mount works well when the mounting surface is already high and unobstructed. The pole-mount configuration is useful when the receiver needs extra height or a cleaner horizon around it, especially on boats with canvas, rails, domes or other topside equipment close by.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis receiver is a good match for owners adding or replacing a dedicated GPS source on a Raymarine network, especially when reliable position data is important for chartplotting, waypoint work, speed over ground, course over ground and general navigation. It fits well on coastal cruising boats, fishing boats, sailboats and larger vessels that benefit from a dedicated receiver mounted where satellite reception is stronger.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"With Pole Mounting Kit","offer_id":51550364467446,"sku":"APL139182-V2","price":389.99,"currency_code":"USD","in_stock":true},{"title":"Standard","offer_id":51550364500214,"sku":"APL139182-V1","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327806_apl139182.webp?v=1787792112"},{"product_id":"apl151213","title":"Garmin BlueNet Network to RJ45 Adapter Cable, For OneHelm and Fusion RJ45 Devices","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12531-02 is an adapter cable that bridges a Garmin BlueNet network port to a standard RJ45 Ethernet connection. It lets you tie in compatible equipment that uses an RJ45 network jack, including Fusion PartyBus stereos, OneHelm digital switching hardware with an RJ45 port, IP cameras, and other third-party network devices. Garmin BlueNet supports network connection speeds up to 1 Gbps, and the BlueNet side uses a connector that is similar in size to a NMEA 2000 plug for easier routing behind the helm.\u003c\/p\u003e\u003cp\u003eThis cable is meant for bringing RJ45-based devices onto a BlueNet network. It is not used to connect legacy Garmin Marine Network devices directly to a BlueNet port in a mixed network setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdapter between a Garmin BlueNet network connector and a standard RJ45 Ethernet port\u003c\/li\u003e\n\u003cli\u003eUsed to connect a network-compatible Fusion PartyBus stereo to a Garmin BlueNet device\u003c\/li\u003e\n\u003cli\u003eSupports connecting compatible IP cameras and other third-party Ethernet devices to a Garmin BlueNet device\u003c\/li\u003e\n\u003cli\u003eFits Garmin BlueNet network layouts built around a Garmin BlueNet chartplotter or a Garmin BlueNet 20 switch\u003c\/li\u003e\n\u003cli\u003eHelps avoid mismatched connections when integrating RJ45 devices into a BlueNet-based network\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match when your boat has Garmin BlueNet networking but the device you need to add uses a conventional RJ45 Ethernet port. It is most often installed at the helm, inside an electronics locker, or near a network switch where the RJ45 side can stay protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe BlueNet connector can look similar in size to a NMEA 2000 connector, but it is for Ethernet networking and does not connect to a NMEA 2000 backbone.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with gentle bends and secure it so vibration does not stress the connectors. Leave a small service loop at each end so you can unplug equipment without pulling on the cable run.\u003c\/p\u003e\u003cp\u003eBecause RJ45 connections are best kept in a dry, sheltered spot, plan the termination point so the RJ45 end lands inside a protected enclosure or behind a gasketed panel whenever possible.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThis adapter makes sense when you are upgrading to Garmin BlueNet chartplotters and still want to network a Fusion PartyBus stereo, add an IP camera feed, or bring a third-party Ethernet device onto the boat network for configuration and troubleshooting.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550364631286,"sku":"APL151213","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715520_apl151213.jpg?v=1787792121"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-gps-radar.oembed?page=3","provider":"Apollo Lighting","version":"1.0","type":"link"}