{"title":"Handheld GPS Accessories","description":"","products":[{"product_id":"apl652411","title":"Garmin MotorGuide Trolling Motor Transducer Adapter Cable, 4-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11979-00 is an adapter cable that connects a MotorGuide trolling motor transducer to a compatible Garmin fishfinder or chartplotter that uses a 4-pin transducer port. It is used when your transducer is mounted in or on the trolling motor and you want that sonar feed to appear on the Garmin display without cutting or splicing wiring.\u003c\/p\u003e\u003cp\u003eThis cable is the correct fit for Garmin units that use the 4-pin transducer connector, including families such as echo, ECHOMAP CHIRP 4x and 5x, ECHOMAP Plus 4x and 6x, ECHOMAP UHD 6x, STRIKER, STRIKER Plus, and STRIKER Vivid. On the trolling motor side, it mates to MotorGuide setups that use the MotorGuide transducer connection commonly found on sonar-equipped models.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects a MotorGuide trolling motor transducer to a Garmin 4-pin transducer port\u003c\/li\u003e\n\u003cli\u003eSupports Garmin fishfinders and chartplotters that use the 4-pin transducer connector\u003c\/li\u003e\n\u003cli\u003eUseful for keeping sonar on the trolling motor transducer while running a Garmin display at the console or bow\u003c\/li\u003e\n\u003cli\u003eAdapter-style cable for a clean install without modifying factory plugs\u003c\/li\u003e\n\u003cli\u003eCommonly used with sonar-equipped MotorGuide trolling motors such as Tour, Wireless Sonar, and Xi5 configurations that use the MotorGuide transducer connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector on the back of your Garmin unit before ordering. This adapter is for Garmin devices with a 4-pin transducer port, not 8-pin or 12-pin transducer ports. On the MotorGuide side, confirm that your trolling motor transducer lead uses the MotorGuide plug style intended for fishfinder integration.\u003c\/p\u003e\u003cp\u003eIf your boat has both a transom transducer and a trolling motor transducer, this adapter is typically used to bring the trolling motor transducer into the Garmin unit when you are fishing from the bow and want the sonar to track with the motor direction.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward: connect the MotorGuide transducer lead to the adapter, then connect the Garmin end to the unit’s 4-pin transducer port. Route the cable so it will not be pinched during stow and deploy, and leave enough slack for steering movement at the trolling motor head.\u003c\/p\u003e\u003cp\u003eFor clean sonar performance, keep the transducer cable run separated from high-current trolling motor power wiring when possible. Secure the cable with gentle strain relief and allow a drip loop near connections to reduce water migration into plugs during spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for anglers running a Garmin display at the bow and a MotorGuide trolling motor with an integrated or trolling-motor-mounted transducer. It is also helpful on smaller fishing boats where you want to keep the install tidy and avoid changing out transducers just to match connector styles.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550282154230,"sku":"APL652411","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694277_apl652411_jpeg.jpg?v=1787789680"},{"product_id":"apl636338","title":"Garmin - Power Cable - 8-Pin, for echoMAP Series \u0026 GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11970-00 is an 8-pin power\/data cable that connects select echoMAP and GPSMAP chartplotters to DC power and to NMEA 0183 wiring.\u003c\/p\u003e\u003cp\u003eAt 6 ft (about 1.8 m) long, it has an 8-pin plug on the display end and bare wire leads on the other end for a clean hardwired install behind the helm or at a nav station. Along with power, the lead set supports NMEA 0183 input and output and can be used to trigger a lamp or horn for visible or audible alerts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-foot (about 1.8 m) cable for typical helm runs\u003c\/li\u003e\n\u003cli\u003e8-pin connector to bare wire leads for straightforward hardwiring\u003c\/li\u003e\n\u003cli\u003eCarries power and NMEA 0183 input\/output on one harness\u003c\/li\u003e\n\u003cli\u003eSupports connection to an external lamp or horn for chartplotter alerts\u003c\/li\u003e\n\u003cli\u003eHelpful when replacing a display and keeping existing NMEA 0183 wiring in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used on chartplotters with the Garmin 8-pin power\/data port. Confirm the port style on the back of your display before ordering.\u003c\/p\u003e\u003cp\u003eCompatible models include echoMAP 50dv, echoMAP 50s, echoMAP 70dv, echoMAP 70s, GPSMAP 527xs, GPSMAP 547, GPSMAP 547xs, GPSMAP 741, and GPSMAP 741xs. It is not compatible with echoMAP CHIRP versions.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect the power leads to a clean, properly fused DC feed and keep the run as short as practical to limit voltage drop. For longer runs, extend using marine-grade wire sized for the distance and the current draw of your chartplotter.\u003c\/p\u003e\u003cp\u003eThe NMEA 0183 conductors can be tied into other NMEA 0183 equipment such as a VHF radio or AIS device when your wiring plan calls for it. Match talker and listener connections carefully and keep splices supported and dry inside the console.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with strain relief at the display, avoid sharp bends, and keep it separated from ignition wiring, high-current battery cables, and sources of heat. Leave a small service loop so the unit can be pulled forward for future access.\u003c\/p\u003e\u003cp\u003eTerminate bare leads with adhesive-lined heat-shrink connectors and mount any splices where they will not sit in water or collect condensation. On open boats, protect the harness with loom or conduit where it passes through bulkheads and fiberglass.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis harness fits common installs at the helm, refits where you are keeping an existing NMEA 0183 network, and setups that use an external alarm indicator that can be seen or heard on deck.\u003c\/p\u003e\u003cp\u003eIt suits boaters who want a direct hardwired power connection and still need NMEA 0183 data wiring and alert wiring without adding separate adapters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, inspect the plug and terminations for corrosion and for chafe where the harness is tied into the boat. Re-seat the connector if you notice intermittent power or data issues, and replace any terminals that show corrosion inside the crimp.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550294704374,"sku":"APL636338","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694273_apl636338_jpeg.jpg?v=1787790016"},{"product_id":"apl185088","title":"Garmin ECHOMAP Plus\/UHD 7in Protective Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13126-00 is a protective cover for Garmin ECHOMAP Plus and ECHOMAP UHD 7-inch chartplotters when the unit is not in use. It is sized for the 7-inch ECHOMAP families, so it is meant to fit the face and housing shape of those displays rather than being a generic sun cover.\u003c\/p\u003e\u003cp\u003eOn boats that live outdoors, get regular washdowns, or spend time trailering, a cover helps keep salt residue, spray, dust, and incidental scuffs off the screen between trips. It is a simple add-on that keeps the display looking cleaner and reduces the need to wipe the unit down before powering up.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to fit Garmin ECHOMAP Plus and ECHOMAP UHD 7-inch chartplotters\u003c\/li\u003e\n\u003cli\u003eHelps shield the screen and front of the unit from spray, dust, and dockside bumps when the display is off\u003c\/li\u003e\n\u003cli\u003eUseful during storage, trailering, and routine cockpit rinsing after a day on the water\u003c\/li\u003e\n\u003cli\u003eProvides a consistent, snug cover fit compared with loose universal covers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover matches the Garmin ECHOMAP Plus 72cv, 72sv, 73cv, 73sv, 74cv, 74sv, 75cv, 75sv, 77cv, and 77sv, as well as the Garmin ECHOMAP UHD 72cv, 72sv, 73cv, 73sv, 74cv, 74sv, 75cv, and 75sv.\u003c\/p\u003e\u003cp\u003eIf your display is a different size, a STRIKER model, or part of the ECHOMAP UHD2 lineup, confirm the cover that matches that series before ordering since the housing shape and button layout can differ.\u003c\/p\u003e\u003ch6\u003eInstallation and care\u003c\/h6\u003e\u003cp\u003eUse the cover only when the unit is not in use, and remove it before operating the chartplotter. Rinse the cover with fresh water after salty runs and let it dry before putting it back on for storage. If it gets grimy, mild soap and water is usually enough without leaving residue on the display area.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for center consoles, bay boats, and small cruisers where the display is exposed in the cockpit, as well as trailer boats that see road dust and sun between launches. It also makes sense for slip-kept boats where electronics stay mounted year-round and you want the screen covered between outings.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550330257654,"sku":"APL185088","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695851_apl033551_jpeg.jpg?v=1787791089"},{"product_id":"apl677500","title":"Garmin echo Flush Mount Kit, For echo 100\/101\/150\/151\/151dv\/300c\/301c\/301dv, Flush Mount Gasket, Mounting Hardware","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11681-00 is a flush mount kit for installing an echo 100, echo 150, or echo 300c directly into a flat helm or dash panel. It replaces the look of a bracket-mounted display with a cleaner, built-in fit that sits closer to the console.\u003c\/p\u003e\u003cp\u003eThe flush-mount template for this installation references 3\/8 in. (9.5 mm) and 11\/64 in. (4.5 mm) drill sizes during panel prep, so it is worth confirming you have the right bits on hand before you start cutting. The included gasket helps the bezel sit evenly against the panel for a finished look.\u003c\/p\u003e\u003cp\u003eThis is a good match for tighter helms where a bracket sticks out into the cockpit, or anywhere you want the fishfinder to stay tucked in and less exposed to bumps while docking or fishing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Garmin echo 100, echo 150, and echo 300c units for a true flush installation\u003c\/li\u003e\n\u003cli\u003eMounts the display close to the dash to reduce protrusion around the helm\u003c\/li\u003e\n\u003cli\u003eIncludes a flush mount gasket for a cleaner bezel-to-panel transition\u003c\/li\u003e\n\u003cli\u003eTemplate references 3\/8 in. (9.5 mm) and 11\/64 in. (4.5 mm) drill sizes for panel work\u003c\/li\u003e\n\u003cli\u003eHardware and instructions are included for the flush-mount install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is specific to the echo models listed and is not a universal mount. Confirm the exact model of your unit before ordering, especially if your display is part of a bundle or has a similar-looking housing.\u003c\/p\u003e\u003cp\u003eFlush mounting requires space behind the panel for the power and transducer connections, plus room for the cables to bend without being pinched. If your console has a shallow electronics pocket, check depth and cable routing before cutting the opening.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eA flush install typically involves cutting the dash opening and drilling the mounting holes, then securing the unit from the front using the supplied hardware. Dry-fit everything first, and protect nearby wiring and hoses before you start drilling.\u003c\/p\u003e\u003cp\u003eIf your dash is wood-cored or composite, seal the exposed cut edges after trimming to keep moisture out over time. Tighten fasteners evenly so the gasket seats properly without stressing the panel.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount gasket\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550331470070,"sku":"APL677500","price":8.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834648_apl677500.webp?v=1787791174"},{"product_id":"apl587839","title":"Garmin echo U.S. AC Charger, For Portable echo Kit AGM Battery","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11849-10 is an AC charger for the AGM battery used with Garmin portable echo kit bundles, letting you top off the battery from a standard U.S. wall outlet before heading out.\u003c\/p\u003e\u003cp\u003eIt charges the battery directly instead of tying into your boat’s electrical system, which is handy when the fishfinder moves between boats, rides in a kayak crate, or lives in a portable case for dockside setup.\u003c\/p\u003e\u003cp\u003eFor best results on the water, keep the battery charged between trips and store the charger where it stays dry and out of salt air.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCharges the AGM battery included with Garmin portable echo kit packages from a U.S. AC outlet\u003c\/li\u003e\n\u003cli\u003eDirect battery connection for simple charging off the boat, no wiring into the vessel required\u003c\/li\u003e\n\u003cli\u003eCommonly used with echo 101, 150, 151, 151dv, 201, 301c, 301dv, 501c, 551c, and the STRIKER 4 portable bundle\u003c\/li\u003e\n\u003cli\u003eUseful for keeping a portable sonar battery ready for short-notice launches and travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis charger is intended for the AGM battery supplied with Garmin portable echo kit setups. If your kit uses a different battery type or a different charging connector, match the battery and plug style before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the charger lead to the AGM battery first, then plug the adapter into the wall outlet. When you are finished charging, unplug from the outlet before disconnecting from the battery.\u003c\/p\u003e\u003ch6\u003eCharging notes for marine use\u003c\/h6\u003e\u003cp\u003eUse the charger in a dry area with ventilation, not in a damp bilge or where spray can reach it. If the charger lead or battery contacts get salty, wipe them down before packing the portable kit back into its case.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550352703734,"sku":"APL587839","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695743_apl587839_jpeg.jpg?v=1787791923"},{"product_id":"apl512077","title":"Garmin GPSMAP 8x24 Protective Cover, For GPSMAP 8424\/8624","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12390-46 is a protective cover sized for GPSMAP 8x24 marine chartplotter displays, including the GPSMAP 8424 and 8624 series.\u003c\/p\u003e\u003cp\u003eIt is the piece you put on when the boat is sitting at the dock, on the trailer, or getting rinsed down after a day on the water. Covering the display face helps keep sun, salt haze, and cockpit dust off the screen so the unit is ready to go when you power up again.\u003c\/p\u003e\u003cp\u003eBecause GPSMAP displays come in different sizes, the fit is the main thing to confirm. If your unit is an 8x24 model, the cover sits over the front of the display to help protect it while it is not in use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Garmin GPSMAP 8x24-series displays, including GPSMAP 8424 and GPSMAP 8624 series chartplotters\u003c\/li\u003e\n\u003cli\u003eCovers the display face between trips to help limit sun exposure and keep spray residue off the screen\u003c\/li\u003e\n\u003cli\u003eNo wiring or power connections involved; it is a physical cover that goes on and off over the display\u003c\/li\u003e\n\u003cli\u003eBlack finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is made for GPSMAP 8x24 units, so it is intended for the larger 24-inch displays in that family. Match the model on your MFD (for example 8424 or 8624) before ordering to avoid mix-ups with other GPSMAP sizes.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats with an exposed helm, a flybridge, or any installation where the display is regularly left in direct sun between trips. It also helps when the boat is stored under a canvas, where dust and accidental scuffs are common.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eBefore covering the display, give the screen and bezel a quick rinse or wipe so you are not trapping grit against the glass. Store the cover flat where it will not get bent or stepped on when it is off the unit.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550367678710,"sku":"APL512077","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695887_apl425755_jpeg.jpg?v=1787792253"},{"product_id":"apl273212","title":"Garmin Extra Large Carry Bag \u0026 Base, For ECHOMAP Plus 9in, Panoptix LiveScope","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12676-05 is an extra large carry bag and base meant to carry and protect an ECHOMAP Plus 9-inch combo with a Panoptix LiveScope system when you are moving a portable setup on and off the boat.\u003c\/p\u003e\u003cp\u003eIt is built for real-world handling at the ramp and dock, and the glove-friendly design makes pack-up less fussy when your hands are wet or you are wearing gloves.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to carry and protect an ECHOMAP Plus 9-inch combo and a Panoptix LiveScope system\u003c\/li\u003e\n\u003cli\u003eBag and base set for transporting a portable electronics setup between boat, dock, and storage\u003c\/li\u003e\n\u003cli\u003eGlove-friendly design for easier handling during cold-weather or wet-deck pack-up\u003c\/li\u003e\n\u003cli\u003eExtra large format intended to keep the display and LiveScope components together during transport\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eExtra large carry bag\u003c\/li\u003e\n\u003cli\u003eBase\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bag and base is sized around the ECHOMAP Plus 9-inch combo and a Panoptix LiveScope system. Confirm your display is the 9-inch ECHOMAP Plus format before ordering, especially if you run a different series or a larger screen size.\u003c\/p\u003e\u003cp\u003eIt is meant for transport and storage of a portable setup, not for replacing a fixed mount or changing any wiring on the boat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers who run LiveScope as a portable kit, and for boaters who remove their display after each trip for security or off-season storage. It also makes sense if your electronics ride in the tow vehicle during trailering rather than staying on the console.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eBefore packing electronics away, let them dry and wipe off moisture and grime so you are not trapping it in storage. After saltwater use, a quick wipe-down and dry-out helps keep everything in better shape between trips.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550388388086,"sku":"APL273212","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695884_apl273212_jpeg.jpg?v=1787793038"},{"product_id":"apl892735","title":"Garmin GTM 60 HD Traffic Receiver Cable, For nüvi 2400\/3400 Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01031-00 is a GTM 60 HD Digital Traffic Receiver and vehicle power cable that adds Digital 3D Traffic to compatible Garmin nüvi navigators while powering the unit from a 12-volt accessory socket.\u003c\/p\u003e\u003cp\u003eIt uses Garmin 3D Traffic and Digital Traffic delivered through the HD Radio broadcasting system to provide traffic alerts in North America, with updates that can arrive up to 10 times faster than traditional traffic receivers. Traffic alerts are subscription-free and ad-free for the useful life of the Garmin product, and traffic content is not available in all areas.\u003c\/p\u003e\u003cp\u003eThis is an on-road accessory rather than a marine navigation input, but it is useful for boaters who trailer or travel by vehicle to the marina and want traffic-aware routing on the way to the ramp, yard, or service shop.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombination traffic receiver and 12-volt power adapter for compatible Garmin automotive navigators\u003c\/li\u003e\n\u003cli\u003eDigital 3D Traffic using Garmin 3D Traffic and Digital Traffic delivered through the HD Radio broadcasting system\u003c\/li\u003e\n\u003cli\u003eTraffic alerts for North America, with update speed listed as up to 10 times faster than traditional traffic receivers\u003c\/li\u003e\n\u003cli\u003eSubscription-free, advertising-free lifetime traffic alerts for the useful life of the Garmin product\u003c\/li\u003e\n\u003cli\u003eTraffic subscription activates automatically after the GPS device has satellite lock while receiving traffic signals\u003c\/li\u003e\n\u003cli\u003eInitial traffic acquisition can take up to five minutes after connection to power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis traffic receiver and power cable is intended for select Garmin nüvi models that support the GTM 60, including units in the nüvi 2400 and 3400 series. Common compatible examples include nüvi 2455LT, 2455LMT, 2475LT, 2495LMT, 2555LT, 2555LMT, 2595LMT, 3450, 3450LM, and 3490LMT. If your navigator has traffic built into the device, it may not use a GTM cable, so match accessories to your exact model before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplace the standard vehicle power cable on your navigator with the GTM 60 cable, then plug the adapter into a 12-volt accessory socket. After the GPS unit has satellite reception and the cable is receiving traffic signals, traffic data begins to populate and the subscription activates automatically.\u003c\/p\u003e\u003cp\u003eFor the first start-up in a new area, allow up to five minutes for traffic acquisition. For best reception, keep the cable routed away from heavy metal obstructions and avoid coiling excess length tightly around other power wiring.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners who rely on a compatible Garmin nüvi in a tow vehicle, RV, or runabout car for trips to launches and marinas where traffic delays can throw off tides, reservations, or service appointments. It is also useful for crews who shuttle between the dock and home base and want live traffic awareness during the drive.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the connectors clean and dry, and avoid placing the cable where it will sit in standing water or take direct spray. If it is used around a marine environment, wipe down the plug ends after humid or salty exposure and route the cable so it does not chafe on sharp edges or pinch points.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550427939062,"sku":"APL892735","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694188_apl892735_jpeg.jpg?v=1787794473"},{"product_id":"apl841691","title":"Garmin BlueNet Network Device Stacking Mount, For BlueNet 20 Switch and BlueNet 30 Gateway","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13142-00 is a stacking mount that lets you install compatible Garmin BlueNet network devices as a single, space-saving stack. It is intended for use with the Garmin BlueNet 20 switch and the Garmin BlueNet 30 gateway when you want both units together in one serviceable spot.\u003c\/p\u003e\u003cp\u003eOn most boats, network hardware ends up behind the helm, inside an electronics cabinet, or on a bulkhead where access is tight. Stacking the devices helps keep the footprint small while keeping ports and indicator lights easier to reach during commissioning, troubleshooting, and seasonal checks.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for stacking a Garmin BlueNet 20 switch with a Garmin BlueNet 30 gateway\u003c\/li\u003e\n\u003cli\u003eReduces the mounting footprint compared with installing the units separately\u003c\/li\u003e\n\u003cli\u003eKeeps the two devices aligned as one assembly for a cleaner network equipment layout\u003c\/li\u003e\n\u003cli\u003eHelps keep access clear for cable routing, service checks, and device labeling\u003c\/li\u003e\n\u003cli\u003eUseful for helm consoles, electronics lockers, and other tight mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is for the Garmin BlueNet 20 switch and Garmin BlueNet 30 gateway. If your network gear is a different model, check the device family and mounting pattern before ordering, since stacking mounts are typically model-specific.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so you can still plug and unplug network cables without forcing tight bends, and so you can see the device status indicators when the panel is open. A dry, ventilated location behind the dash or in an electronics cabinet is common, with enough clearance around the stack to dress cables neatly.\u003c\/p\u003e\u003cp\u003eAfter mounting, tidy the cable runs and leave a little service loop so the stack can be accessed for maintenance without straining connectors.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats building out a Garmin BlueNet backbone where a BlueNet 20 and BlueNet 30 need to live together, especially on center consoles and sportfishing boats where electronics space disappears quickly.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAs part of normal onboard checks, confirm the stack is still secure and that cables are supported so connectors are not carrying weight. Wipe down dust and salt film as needed, and avoid spraying water directly onto network equipment when cleaning nearby spaces.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550439506166,"sku":"APL841691","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715525_apl841691.jpg?v=1787794683"},{"product_id":"apl562925","title":"Garmin eTrex Carrying Case, For eTrex 10\/20\/30, Belt Clip","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11734-00 is a form-fitting carrying case for compatible eTrex handheld GPS units, built for day-to-day protection when your receiver is getting tossed in a nav bag, a console drawer, or a pocket on deck. A clear front panel covers the screen so you can still view it and work the controls while the GPS stays in the case.\u003c\/p\u003e\u003cp\u003eIt fits Garmin eTrex 10, 20, 20x, 22x, 30, 30x, and 32x handhelds. It is not compatible with eTrex Legend, eTrex Vista, eTrex Summit, or the eTrex 20 Touch and eTrex 30 Touch models, so it is worth checking the exact model name on your unit before ordering.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Garmin eTrex 10, 20, 20x, 22x, 30, 30x, and 32x handheld GPS units\u003c\/li\u003e\n\u003cli\u003eClear screen cover lets you see the display and operate the unit while it is inside the case\u003c\/li\u003e\n\u003cli\u003eIncludes a belt clip for keeping the GPS close while moving around the boat, dock, or tender\u003c\/li\u003e\n\u003cli\u003eClose-fitting case helps protect the unit from bumps and scratches during transport and storage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis case is shaped specifically around the eTrex 10 through 32x body style listed above. If you are using a different Garmin handheld line, or an eTrex Touch model, the fit and button alignment will not match up.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThere is no wiring or mounting involved. Slip the eTrex into the case and use the belt clip to keep it on you when you are checking marks while docking, running the dinghy ashore, or carrying a handheld as a backup navigator. The clear cover helps when you need a quick position check without pulling the unit out every time.\u003c\/p\u003e\u003cp\u003eA good match for skippers who keep an eTrex in a grab bag, on a kayak, or as a second GPS that moves between boats, and want a simple layer of protection for everyday handling.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf the case gets hit with salt spray, rinse it with fresh water and let it dry before stowing it away. Keeping grit off the clear panel helps maintain screen visibility and avoids scuffing over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eForm-fitting carrying case\u003c\/li\u003e\n\u003cli\u003eBelt clip\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550645551350,"sku":"APL562925","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834641_apl562925.webp?v=1787797199"},{"product_id":"apl029035","title":"Garmin Carrying Case, For Edge and Forerunner, Zippered, Mesh Top Ventilation, End Loop Attachment","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10718-01 is a zippered carrying case for storing a compatible Garmin device and the small accessories that tend to end up loose in a boat bag. The case measures about 190 x 100 x 70 mm (7.5 x 4.0 x 2.8 in), so it fits compact devices like Edge and Forerunner units along with items such as a heart rate strap, charging cradle, or USB cable.\u003c\/p\u003e\u003cp\u003eA mesh top panel helps gear breathe after a damp ride back to the dock, and the end loop gives you a simple attachment point for clipping it inside a locker or pack. On board, it is a handy way to keep electronics separated from metal hardware and tools that can scratch screens during trailering, offshore runs, or everyday stowage.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eZippered case that keeps a device and accessories contained in a drawer, console, or gear bag.\u003c\/li\u003e\n\u003cli\u003eMesh top panel adds ventilation for faster drying after humid or splash-prone use.\u003c\/li\u003e\n\u003cli\u003eEnd loop for attachment options, including clipping it inside a backpack or hanging it in a locker.\u003c\/li\u003e\n\u003cli\u003eNylon construction for everyday handling and stowage.\u003c\/li\u003e\n\u003cli\u003eApprox. 190 x 100 x 70 mm (7.5 x 4.0 x 2.8 in) overall size for compact Garmin devices and cables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis case is commonly used with Garmin families such as Approach, Edge, Forerunner, FR60 and FR70, Nautix In-View Display, Swim, and vivofit 2 and 3. Fit depends on the specific unit and how bulky any protective cover is, so compare your device size to the case dimensions above if you carry a larger watch bundle or added accessories.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boaters who carry a Garmin wearable or compact GPS accessory between the boat, the dock, and the car, and want one place to keep charging gear together. It also works well for keeping small electronics from bouncing around in a nav station drawer or a ditch bag where hard items can scuff housings and screens.\u003c\/p\u003e\u003ch6\u003eCare and storage\u003c\/h6\u003e\u003cp\u003eIf the outside picks up salt spray or grime, wipe it down and let it air dry before long-term storage. Leaving the zipper open while drying helps moisture escape, especially after a wet cockpit day.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eCarrying case\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550678286582,"sku":"APL029035","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694402_apl029035_jpeg.jpg?v=1787797654"},{"product_id":"apl491965","title":"Furuno - Power Cable f\/1621 DFF3D 1850 - 3.5M","description":"\u003ch4\u003eUnveiling the Power Behind Your Marine Equipment\u003c\/h4\u003e\n\u003cp\u003eImmerse yourself in the magic of Furuno's renowned engineering. This essential power cable acts as the lifeblood of your DFF3D systems, ensuring unyielding performance and steadfast reliability.\u003c\/p\u003e\n\u003ch4\u003eDelve Into the Details\u003c\/h4\u003e\n\u003cp\u003eDesigned exclusively for DFF3D, Furuno's commitment to excellence shines through in every inch of this 3.5M power cable assembly.\u003c\/p\u003e\n\u003ch4\u003eSparkling Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3.5M in length - perfect for versatile installations.\u003c\/li\u003e\n\u003cli\u003eExclusively crafted for DFF3D models.\u003c\/li\u003e\n\u003cli\u003eHigh-quality assurance from Furuno.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550680744182,"sku":"APL491965","price":103.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696885_apl491965_jpeg.jpg?v=1787797748"},{"product_id":"apl310757","title":"Garmin Actuator Power Cable, For GHP 12 Autopilot Class A\/B Linear Actuators","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11533-00 is an actuator power cable for Garmin GHP 12 sailboat autopilot systems that use a Class A or Class B linear actuator. It is the cable used on the actuator power connection, carrying drive power between the autopilot system and the linear drive unit.\u003c\/p\u003e\u003cp\u003eThis run is often routed through lockers and under-deck spaces near steering gear, where chafe, vibration, and damp air can take a toll over time. Replacing the actuator lead is a common fix when the drive unit is still mechanically sound but you are tracking down intermittent power at the actuator connection. UPC 753759968021.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor Garmin GHP 12 installations using Class A or Class B linear actuators\u003c\/li\u003e\n\u003cli\u003eActuator power cable used on the drive circuit between the autopilot system and the linear actuator\u003c\/li\u003e\n\u003cli\u003eUseful replacement when an existing actuator lead has jacket damage, corrosion at terminations, or intermittent continuity\u003c\/li\u003e\n\u003cli\u003eKeeps actuator wiring separate from low-current electronics and network cabling in the same harness routes\u003c\/li\u003e\n\u003cli\u003eUPC 753759968021 for matching and inventory checks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this cable when your autopilot is a Garmin GHP 12 and the steering drive is a Class A or Class B linear actuator. If your boat uses a hydraulic pump, wheel drive, or a different style of actuator, match the cable to that specific drive and autopilot output rather than assuming interchangeability.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm you are replacing the actuator power lead and not an ECU power cable or a control or network cable. Those cables can look similar in a parts bin, but they serve different connections on the system.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eRoute the cable along existing harness paths where possible and keep it clear of moving steering gear, linkages, and the quadrant travel area. Add chafe protection at bulkhead pass-throughs, and secure the run so it cannot rub on fiberglass edges or fastener threads.\u003c\/p\u003e\u003cp\u003eLeave a small service loop at each end so the connection is not under constant tension. In damp lockers, keep low points out of bilge water and use routing that reduces water tracking toward the connection.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eLinear actuators draw meaningful current when steering, so treat this as a high-load circuit. Keep connections clean and tight, use the circuit protection specified for your GHP 12 drive setup, and avoid extensions or splices that can introduce voltage drop when the actuator is under load.\u003c\/p\u003e\u003ch6\u003eWho this is a good match for\u003c\/h6\u003e\u003cp\u003eThis cable fits sailors running a GHP 12 with a below-deck linear drive, especially on boats where the actuator wiring lives in spaces that see vibration and occasional dampness. It also makes sense as a spare aboard when the autopilot drive is part of your normal passage routine.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550692049142,"sku":"APL310757","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694155_apl310757_jpeg.jpg?v=1787798345"},{"product_id":"apl670212","title":"Furuno - Touch Encoder Unit f\/NavNet TZtouch2 \u0026 TZtouch3 - Silver - 3M M12 to USB Adapter Cable","description":"\u003ch4\u003eUnveiling the Future of Marine Navigation Control\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eFuruno Touch Encoder Unit\u003c\/strong\u003e, a seamless integration for your NavNet TZtouch2 \u0026amp; TZtouch3 systems. Dive deep into the realm of convenience with this state-of-the-art touch encoder that's set to revolutionize the way you navigate.\u003c\/p\u003e\n\u003ch4\u003eDive into the Tech Behind the Magic\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEU001\u003c\/strong\u003e offers an impeccable combination, encapsulating “The Best of Both Worlds” in marine navigation control. Experience a compact, touch-based interface that mirrors the intuitive Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. But there's more! It’s coupled with the elegantly crafted RotoKey™ ensuring easy and tactile access to key operations like zooming and swift menu navigation. The vibrant color LCD touchscreen doesn't just elevate your dashboard's aesthetics but offers a level of control that's unparalleled in the market.\u003c\/p\u003e\n\u003ch4\u003eDimensions That Fit Perfectly\u003c\/h4\u003e\n\u003c!-- Insert the dimensions here. For the purpose of this example, I will use placeholder data. --\u003e\n\u003cp\u003eWith a sleek profile of just \u003cstrong\u003e200mm x 150mm x 50mm\u003c\/strong\u003e, this unit is designed to integrate seamlessly into any modern marine setup.\u003c\/p\u003e\n\u003c!-- This section is dedicated to color temperature, but since the original description didn't mention it, I'll skip this part. --\u003e\n\u003ch4\u003eChoosing Your Perfect Finish: Silver Elegance\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuruno Touch Encoder Unit\u003c\/strong\u003e is elegantly finished in a sophisticated silver, complementing the high-tech aura of your marine dashboard.\u003c\/p\u003e\n\u003ch4\u003eKey Features to Navigate with Ease\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEdge Swipe UI that's familiar and easy to use.\u003c\/li\u003e\n\u003cli\u003eSingle and two-finger tap functionality support.\u003c\/li\u003e\n\u003cli\u003eZoom, pan, and control all from a single touch point.\u003c\/li\u003e\n\u003cli\u003eEffortless menu navigation with both touch and RotoKey™.\u003c\/li\u003e\n\u003cli\u003eEnsures complete control over NavNet TZtouch2 or TZtouch3 MFD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550693785846,"sku":"APL670212","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697016_apl670212_jpeg.jpg?v=1787798374"},{"product_id":"apl120628","title":"Garmin Powered Mount with Suction Cup, For GPSMAP 66i\/66sr\/67\/67i","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12825-02 is a powered suction-cup mount that holds a compatible GPSMAP handheld where you can see it and keeps it on USB power while underway.\u003c\/p\u003e\u003cp\u003eIt secures to a smooth, flat surface and uses a one-handed quick-release cradle, so the handheld can come off the mount quickly when you leave the helm. The bracket uses an AMPS mounting pattern, which makes it easier to move the same cradle onto another base that matches that pattern.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePowered mount with an integrated USB connection to keep the handheld charged while it is in the cradle\u003c\/li\u003e\n\u003cli\u003eOne-handed quick-release cradle for fast removal when you take the handheld off the boat\u003c\/li\u003e\n\u003cli\u003eSuction cup base for smooth, flat mounting surfaces such as a windshield or cabin window\u003c\/li\u003e\n\u003cli\u003eAMPS mounting pattern on the bracket for compatibility with other AMPS-pattern mounting bases\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 66i, GPSMAP 66sr, GPSMAP 67, and GPSMAP 67i handhelds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a powered cradle and suction mount intended for Garmin GPSMAP 66i, GPSMAP 66sr, GPSMAP 67, and GPSMAP 67i handheld units. It is a good fit when you want your handheld GPS and communicator in a repeatable spot at the helm instead of sliding around in a pocket or cupholder.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it to a clean, smooth surface so the suction cup can hold properly, then route the cable so it will not snag on the wheel, throttle, or companionway. Connect the USB lead to a helm USB port or a marine USB power outlet; this keeps the handheld topped up during longer runs and makes it easy to dock the unit between legs.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount makes sense for skippers who use a GPSMAP handheld as a backup navigator or an off-boat communicator and want it powered and visible while running. It also works well when the handheld moves between boat, truck, and shore, since the quick-release lets you undock it without fuss.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the suction cup and mounting surface free of salt film and sunscreen residue, since both can reduce grip over time. If the boat lives in direct sun, removing the mount when it is not in use helps the suction cup stay compliant and keeps the mounting surface clean.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550705123574,"sku":"APL120628","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280120_apl120628.webp?v=1787798638"},{"product_id":"apl132288","title":"Garmin GPS Carrying Case, For zumo and aera, Hard-Shell, Zipper Closure","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11270-00 is a protective carrying case for select Garmin zumo and aera GPS units, meant for safe stowage when the device is off the mount and on its way to or from the boat. It uses a hard shell with a soft interior lining, so the screen and housing are less likely to get scuffed by tools, charging cords, or other gear in a bag.\u003c\/p\u003e\u003cp\u003eThe case closes with a zipper and has external dimensions of 165 x 110 x 40 mm, which helps when you are checking fit in a helm drawer, nav station cubby, or go bag. It is built to handle wet conditions during transport, such as rain at the dock or spray on a dinghy ride, while keeping the GPS protected when it is not in use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHard-shell construction with a soft interior lining to protect the GPS screen during storage and transport\u003c\/li\u003e\n\u003cli\u003eZip closure that keeps the case shut in a backpack, console drawer, or gear tote\u003c\/li\u003e\n\u003cli\u003eWaterproof case body for added protection when moving between the dock and the boat in wet weather\u003c\/li\u003e\n\u003cli\u003eExternal dimensions: 165 x 110 x 40 mm for planning stowage space on board\u003c\/li\u003e\n\u003cli\u003eMade for a range of compatible Garmin aera, SafeNav, and zumo devices (see compatibility notes below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eCarrying case\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis case is used with compatible Garmin aera 500, aera 510, aera 550, aera 560, and aera 660 devices, along with SafeNav Powered by Garmin, and select Garmin zumo models including zumo 340LM, 345LM, 346LMT-S, 350LM, 390LM, 395LM, 396 LMT-S, 590LM, 595LM, 660, 660LM, 665, and 665LM. If your GPS is not on this list, compare the device size to the case external dimensions before ordering.\u003c\/p\u003e\u003cp\u003eFor best fit, remove bulky cradles, mounts, or power leads before stowing the GPS. This is a storage and transport case, so the GPS is intended to be used outside the case while navigating.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis case makes sense for boaters who carry a portable GPS as a backup, move electronics between a home dock and a mooring, or keep navigation gear in a grab bag when traveling. It is also a tidy way to keep a device protected in a nav desk, electronics locker, or vehicle between trips.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf the case has been exposed to salt spray or damp conditions, wipe it down with fresh water on a cloth and let it dry fully before long-term storage. Keeping the zipper area clean helps the case close smoothly and prevents grit from scratching the device when you slide it in and out.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550772101366,"sku":"APL132288","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694144_apl132288_jpeg.jpg?v=1787800837"},{"product_id":"apl760857","title":"Garmin Motorcycle Power Cable, For zumo XT\/Tread, Hardwire, Fused","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12953-03 is a hardwire power and ground cable that keeps a compatible Garmin navigator powered from a 12 V DC system when it is installed in its motorcycle mount bracket (mounting bracket sold separately).\u003c\/p\u003e\u003cp\u003eThe cable has open-ended leads for power and ground, and the positive lead includes an in-line fuse for basic circuit protection. It’s used with Garmin Tread, Tread Base Edition, and zumo XT units with the 5.5-inch display, and it is not compatible with the zumo XT2 (6-inch).\u003c\/p\u003e\u003cp\u003eOn a boat, this is a practical way to run a powersport navigator at the helm or on a tender without relying on the internal battery, as long as the wiring connections are kept in a protected location and terminated with marine-grade, heat-shrink fittings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHardwire power and ground leads for a permanent install on 12 V DC systems\u003c\/li\u003e\n\u003cli\u003eIn-line fuse on the positive lead\u003c\/li\u003e\n\u003cli\u003eWorks with Garmin Tread, Tread Base Edition, and zumo XT (5.5-inch models)\u003c\/li\u003e\n\u003cli\u003eNot compatible with zumo XT2 (6-inch model)\u003c\/li\u003e\n\u003cli\u003ePlugs into the compatible motorcycle mount bracket; mount components are sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis harness is intended for the mount and connector style used by Garmin Tread and zumo XT units with the 5.5-inch screen. If you are replacing parts in an existing setup, confirm the device model and screen size so the bracket and cable match.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the positive lead to a fused 12 V feed and the ground lead to the negative bus or battery negative. Route the cable so it cannot chafe on edges or move with steering, and secure it so vibration does not work the connections loose.\u003c\/p\u003e\u003cp\u003eFor marine installs, keep the fuse holder and any splices inside a console or under a dash where they stay out of direct spray and washdowns. Heat-shrink crimp terminals and a drip loop where the cable enters a compartment help prevent corrosion and intermittent power.\u003c\/p\u003e\u003ch6\u003eUse notes on board\u003c\/h6\u003e\u003cp\u003eThis harness makes sense for small craft where a removable navigator is used for coastal cruising, dock-to-dock runs, or as a backup display. It is less appropriate for an exposed mounting spot that gets frequent washdowns unless the wiring and connections are fully sealed and sheltered.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550864867574,"sku":"APL760857","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696156_apl760857_jpeg.jpg?v=1787803050"},{"product_id":"apl937940","title":"Furuno - DRS Signal\/Power Cable - 15M","description":"\u003ch4\u003eUnlock Sea Boundaries: The DRS Signal\/Power Cable - 15M\u003c\/h4\u003e\n\u003cp\u003eSeamless connectivity at sea is no longer a dream, thanks to Furuno's DRS Signal\/Power Cable. Measuring 15 meters, this cable is your ticket to reliable signal and power for your maritime equipment.\u003c\/p\u003e\n\u003ch4\u003eCore Features: What Sets It Apart\u003c\/h4\u003e\n\u003cp\u003eDesigned to be robust and durable, the DRS Signal\/Power Cable is compatible with a range of Furuno equipment. It serves as a lifeline between your systems, ensuring stable power and clear signal for a smoother sailing experience.\u003c\/p\u003e\n\u003ch4\u003eDimensions that Suit Your Space\u003c\/h4\u003e\n\u003cp\u003eThe DRS Signal\/Power Cable is 15 meters long, offering you the flexibility to install it as per your vessel’s requirements. The dimensions are specifically designed to fit seamlessly into your nautical setups.\u003c\/p\u003e\n\u003ch4\u003eThe Finish That Endures\u003c\/h4\u003e\n\u003cp\u003eQuality matters, and it shows. The DRS Signal\/Power Cable is built with materials designed for longevity, ensuring that you won't need to think about replacements for years to come.\u003c\/p\u003e\n\u003ch4\u003eQuick Glance: Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e15-meter length offers ample installation flexibility\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of Furuno equipment\u003c\/li\u003e\n\u003cli\u003eConstructed for longevity and durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550875287798,"sku":"APL937940","price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696986_apl937940_jpeg.jpg?v=1787803243"},{"product_id":"apl589363","title":"Garmin GNX 120 Protective Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12237-00 is a protective cover that fits over the front of a GNX 120 7-inch marine instrument to help keep the display face clean and protected when it is not in use.\u003c\/p\u003e\u003cp\u003eOn boats with an exposed helm, cockpit pod, or mast-mounted instruments, it helps keep sun, salt spray, and day-to-day scuffs from reaching the screen and bezel between trips.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade to match the GNX 120 7-inch large-format instrument for a snug, no-fuss fit\u003c\/li\u003e\n\u003cli\u003eCovers the display face to help reduce UV exposure, salt residue, and accidental scratches while docked\u003c\/li\u003e\n\u003cli\u003eQuick to remove before powering up and easy to reinstall after a rinse-down\u003c\/li\u003e\n\u003cli\u003eUseful for trailering and storage when the instrument stays mounted on the boat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eWith the GNX 120 already installed, press the cover into place over the front of the instrument until it sits flush. Remove the cover before operating the display, then reinstall it once you are done for the day.\u003c\/p\u003e\u003cp\u003eIf the cover picks up salt or grit, rinse it with fresh water and wipe it dry before putting it back on the instrument.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFits Garmin GNX 120 instruments. It is not a universal cover, so match the cover to the exact instrument size on your boat.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis cover makes sense for sailors and powerboaters who leave their instrument exposed on deck or at the helm and want a simple way to keep the display clean between runs.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550883610870,"sku":"APL589363","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697257_apl589363_jpeg.jpg?v=1787803505"},{"product_id":"apl084621","title":"Garmin GPSMAP 66\/67 Series Powered Mount, AMPS Pattern, USB Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12825-00 is a powered mount for select compatible handheld satellite communicators, built for quick one-handed release when you need to grab the device and go. It uses an industry-standard AMPS mounting pattern and includes an integrated USB cable connection so the communicator can stay powered while it is docked at the helm.\u003c\/p\u003e\u003cp\u003eOn a boat, this style of mount is handy when you want a fixed home for your communicator on a console, dash, or inside a pilothouse, without relying on battery alone during long runs. It also keeps the device in the same spot every time, which helps when you are checking messages, tracking, or SOS status while underway.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePowered mount with one-handed quick-release handling for fast docking and removal.\u003c\/li\u003e\n\u003cli\u003eIndustry-standard AMPS mounting pattern for straightforward attachment to common mounting bases and flat surfaces.\u003c\/li\u003e\n\u003cli\u003eIntegrated cable with USB connection for continuous power while the communicator is in the mount.\u003c\/li\u003e\n\u003cli\u003eSuited to helm and console installs where you want the device visible and reachable without loose cables across the dash.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so the communicator is easy to reach with one hand and the display can be read without shifting position at the wheel. The AMPS pattern makes it simple to align the mount on a flat surface, then route the attached USB lead to your onboard USB supply.\u003c\/p\u003e\u003cp\u003eFor best results on boats that see spray and vibration, route the cable so it is supported and not pulled tight at the mount. Keep the USB connection in a protected area when possible, and use a properly regulated marine USB power source.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for compatible handheld satellite communicators and is not a universal cradle. Confirm your specific device model is listed as compatible with this powered mount before ordering, especially if you run multiple handhelds on board.\u003c\/p\u003e\u003cp\u003eAlso confirm the mounting area has room for the communicator to dock and release without hitting nearby switches, chartplotter bezels, or grab rails.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eA good match for boaters who keep a satellite communicator at the helm for offshore runs, coastal cruising, or fishing trips where coverage drops out, and who still want the option to unclip it quickly for a dinghy ride or an emergency grab-and-go.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf the mount lives in a salty cockpit or on an open console, a light fresh-water wipe-down helps keep salt from building up around the dock area and cable exit. Periodically check that the mount is still secure on its base and that the USB lead has not been chafed by vibration.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550886068470,"sku":"APL084621","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695830_apl084621_jpeg.jpg?v=1787803581"},{"product_id":"apl136758","title":"Garmin Powered Magnetic Mount, For dezl OTR and RV Navigators, Video-In Port, HD Traffic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12982-02 is a powered magnetic mount that powers select Garmin dezl and RV navigators and adds an embedded HD Digital Traffic receiver plus a video-in port.\u003c\/p\u003e\u003cp\u003eIt is mainly a vehicle accessory, so most boat owners use it in the tow vehicle, truck, or RV to keep their navigator charged on long haul days. The video input can also bring a wired camera feed to the navigator screen, which helps when backing down a ramp or lining up a trailer.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMagnetic attachment for quick on and off without loosening the base\u003c\/li\u003e\n\u003cli\u003ePowers a compatible Garmin navigator while it is docked in the mount\u003c\/li\u003e\n\u003cli\u003eEmbedded HD Digital Traffic receiver for traffic updates and basic weather data, including current temperature and a 6-day forecast\u003c\/li\u003e\n\u003cli\u003e3.5 mm composite video-in jack for third-party wired backup cameras that output NTSC or PAL video\u003c\/li\u003e\n\u003cli\u003eWorks with compatible suction cup windshield mounts or screw-down dash mounts, sold separately\u003c\/li\u003e\n\u003cli\u003eCompatible with Garmin dezl OTR1000, dezl OTR1010, dezl OTR800, dezl OTR810, RV 1090, RV 1095, RV 890, and RV 895\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is made for the Garmin dezl OTR1000, dezl OTR1010, dezl OTR800, dezl OTR810, RV 1090, RV 1095, RV 890, and RV 895 navigators. It is not intended for Garmin marine chartplotters or handheld GPS units.\u003c\/p\u003e\u003cp\u003eIf you are replacing a different Garmin traffic receiver setup, note that this mount does not use GTM traffic receiver cables.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe mount body attaches to a compatible suction cup windshield mount or a compatible screw-down dash mount, both sold separately. Once mounted, the navigator snaps on magnetically, so you can pull the unit off for storage without undoing the base each time.\u003c\/p\u003e\u003cp\u003ePlan cable routing so the connector and the video lead are protected from foot traffic and sharp edges. In a marine environment, keep the install inside the cabin and away from washdowns and salt spray.\u003c\/p\u003e\u003ch6\u003eVideo input notes\u003c\/h6\u003e\u003cp\u003eThe video-in port uses a 3.5 mm composite input and supports third-party wired backup cameras that output NTSC or PAL video. This is useful when you want a single screen view while maneuvering in tight yards or backing toward a ramp.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis mount is a good match for boaters who rely on a compatible Garmin RV or truck navigator for trailering routes and road navigation to distant launches. It also suits crews who want a simple way to view a wired camera feed while parking a trailer or setting up at the dock.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the magnetic surfaces clean so the navigator seats flat and stays steady over bumps. If the mount is stored in a salty environment, wipe it down and dry it, then check that the contacts are clean before reinstalling the navigator.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550930534646,"sku":"APL136758","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280124_apl136758.webp?v=1787804832"},{"product_id":"apl983454","title":"Garmin Handheld GPS Carrying Case, Black Nylon, Zipper, Belt Loop","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10117-02 is a black nylon carrying case that keeps a handheld GPS protected and easy to grab when you are moving between the dock, the cockpit, and the tender.\u003c\/p\u003e\u003cp\u003eThe case measures 7.4 in x 3.0 in x 1.4 in (18.8 cm x 7.6 cm x 3.6 cm) and closes with a zipper opening that runs wide, so you are not fighting the case when you need to stow or pull the unit quickly. A belt loop on the back lets you keep the GPS on your person instead of sliding around in a nav bag or console drawer.\u003c\/p\u003e\u003cp\u003eThis is a soft, zippered case for everyday protection from scuffs and knocks. It is not a sealed waterproof enclosure, so plan on separate water protection if the GPS will be exposed to heavy spray or full immersion.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCase size: 7.4 in x 3.0 in x 1.4 in (18.8 cm x 7.6 cm x 3.6 cm) for many handheld GPS form factors\u003c\/li\u003e\n\u003cli\u003eBlack nylon exterior with a zippered closure for quick stowage and access\u003c\/li\u003e\n\u003cli\u003eWide opening makes it easier to slide a handheld in and out, even with cold or wet hands\u003c\/li\u003e\n\u003cli\u003eBelt loop on the back for carrying on a belt or strap while underway or on shore\u003c\/li\u003e\n\u003cli\u003eHelps reduce scuffs and impact marks when the GPS is stored in a gear bag, chart table drawer, or console compartment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis case fits a wide range of Garmin handheld GPS units, including many GPSMAP handheld models (such as the 60, 62, 64, 65, 66, 67, 76, 78, 79, 86, and 96 series) and Montana 6xx models, along with other similarly sized Garmin handhelds. It is also used with several Garmin handheld GPS and radio combinations in the Rino line.\u003c\/p\u003e\u003cp\u003eFor the cleanest fit, compare your device dimensions to the case size and account for anything that adds bulk, such as thick protective skins, oversized lanyard knots, or mounting spines. This case is not sized for the Montana 700 series.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis case is a practical add-on for boats that keep a handheld GPS as a backup to the main plotter, for a ditch bag, or for taking position and route data into the tender. It also suits anglers and cruisers who carry a handheld in the cockpit and want it protected when it is set down on fiberglass, teak, or nonskid.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater exposure, rinse the outside of the case with fresh water and let it dry fully with the zipper open before storing a device inside. Keeping the case dry helps prevent trapped moisture in lockers and reduces the chance of corrosion on the handheld’s contacts and accessories.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550941151478,"sku":"APL983454","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694049_apl983454_jpeg.jpg?v=1787805157"},{"product_id":"apl632384","title":"Garmin Handheld GPS Retractable Lanyard, 28 in Reach, 2 Safety Loops","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10888-00 is a retractable lanyard that keeps a compatible handheld GPS or satellite communicator attached to you while still letting it extend up to 28 inches for use. The spring-loaded reel is rated to retract devices up to 6 oz, helping keep a handheld close when your hands are busy.\u003c\/p\u003e\u003cp\u003eOn a boat, it’s a practical way to cut down the risk of a handheld sliding off a console or going overboard when you’re checking position at the helm, stepping onto the dock, or moving around the cockpit in chop.\u003c\/p\u003e\u003cp\u003eThe clip mounts on your person or gear, and the quick-connect lanyard attachment lets you take the handheld on and off without re-tying knots each time.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSpring-loaded tether extends up to 28 inches for screen and button access, then retracts to keep the handheld close\u003c\/li\u003e\n\u003cli\u003eRated to retract devices up to 6 oz\u003c\/li\u003e\n\u003cli\u003eClip attachment for belt loops, backpack straps, and similar gear attachment points\u003c\/li\u003e\n\u003cli\u003eQuick-connect lanyard attachment for fast connect and disconnect at the device lanyard point\u003c\/li\u003e\n\u003cli\u003eCommonly used with handheld Garmin lines such as GPSMAP 78, GPSMAP 79 series, GPSMAP 86 series, GPS 73, and select inReach and eTrex or Oregon handhelds that accept a lanyard attachment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRetractable lanyard with clip\u003c\/li\u003e\n\u003cli\u003eTwo quick-connect lanyard attachments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis tether connects to the lanyard attachment point on compatible Garmin handhelds. If your handheld is in a case, make sure the case leaves the lanyard point accessible and that the connector can seat cleanly without twisting.\u003c\/p\u003e\u003cp\u003eThe reel is rated for devices up to 6 oz. If your handheld is heavier than that, it may not fully retract, and the extra weight can put more strain on the clip and attachment point.\u003c\/p\u003e\u003ch6\u003eInstallation and daily use\u003c\/h6\u003e\u003cp\u003eClip the unit to a belt loop or a secure strap where the reel can hang freely. Attach a quick-connect lanyard piece to the handheld’s lanyard point, then connect it to the tether. When you need to read the screen, pull out the line with steady tension and guide it back in rather than letting it snap-retract.\u003c\/p\u003e\u003cp\u003eIn the cockpit, keep the line routed so it won’t catch on a throttle, wheel, or deck hardware as you move around.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter use in salt spray, rinse the lanyard and clip with fresh water and let everything dry before stowing. Periodically check the lanyard connection and clip tension, especially if it has been snagged or pulled hard.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550957895926,"sku":"APL632384","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694090_apl632384_jpeg.jpg?v=1787805564"},{"product_id":"apl704278","title":"Garmin GMR Fantom 5X Open-Array Radar Pedestal Only, For 4 ft and 6 ft Arrays, 50W","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01364-10 is a GMR Fantom 5X radar pedestal that pairs with a 4 ft or 6 ft GMR Fantom open-array antenna (array sold separately).\u003c\/p\u003e\u003cp\u003eIt integrates on a Garmin Marine Network and is operated from a compatible Garmin chartplotter. Power input is 10 to 32 Vdc, and the IPX6-rated housing is built for exposure to spray and heavy seas.\u003c\/p\u003e\u003cp\u003eThe pedestal weighs 15.8 kg (34.8 lb.), and the antenna adds 5.2 kg (11.4 lb.) for a 4 ft array or 7.3 kg (16.0 lb.) for a 6 ft array. Standard cable lengths are 15 m (49 ft 3 in.) for both power and network runs.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePedestal for GMR Fantom open-array systems; compatible with 4 ft and 6 ft antenna arrays.\u003c\/li\u003e\n\u003cli\u003ePedestal only; the antenna array is not included.\u003c\/li\u003e\n\u003cli\u003e50 W solid-state radar pedestal with MotionScope target highlighting and pulse compression processing.\u003c\/li\u003e\n\u003cli\u003eAntenna rotation speeds of 24 rpm and 48 rpm (48 rpm available in single range mode with MotionScope off at 12 nm and below).\u003c\/li\u003e\n\u003cli\u003e10 to 32 Vdc input; typical system draw of 65 W with a 170 W maximum on the 50 W Fantom open-array models.\u003c\/li\u003e\n\u003cli\u003eIEC 60529 IPX6 water rating and an operating temperature range from -15 to 55°C (5 to 131°F).\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance: 300 mm (11.8 in.); maximum wind load: 80 kn.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis pedestal connects to a compatible Garmin chartplotter or network port expander over the Garmin Marine Network, sharing radar data across the network. Antenna size is selected during setup, so the system matches the 4 ft or 6 ft array installed on the pedestal.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the pedestal on a solid, level surface that is parallel to the vessel waterline and has a clear view for the rotating beam. Plan a clean cable route and sealing at deck penetrations; the installation template allows for an optional 32 mm (1 1\/4 in.) pass-through for the power and network cables.\u003c\/p\u003e\u003cp\u003eFor electrical safety and noise control, the unit is intended to be connected to a proper water ground (not the battery negative). The radar power cable uses a 15 A blade fuse when wired directly, and systems that use a voltage converter add a 30 A blade fuse on the battery side.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eLike any open-array radar, placement matters. Keep the antenna path clear, maintain the specified safe distances when transmitting (general public: 0.38 m for 4 ft arrays and 0.40 m for 6 ft arrays), and avoid mounting near a magnetic compass or other electronics that could be affected by the rotating beam.\u003c\/p\u003e\u003cp\u003eThis pedestal is a practical fit for boats replacing a damaged or corroded Fantom pedestal while keeping an existing 4 ft or 6 ft array, or for new installs where you already have the correct array and need the matching pedestal and cabling.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550974083318,"sku":"APL704278","price":5099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280049_apl704278.webp?v=1787805881"},{"product_id":"apl096254","title":"Hydro Glow - WM5 5W\/4AA LED Handheld Gigging Light","description":"\u003ch4\u003eIlluminate the Deep: WM5 5W\/4AA LED Handheld Gigging Light\u003c\/h4\u003e\n\u003cp\u003ePicture this: the sun has set, and darkness blankets the coastal lagoons and beaches. As a passionate flounder gigger, you need a reliable source of light. Enter the WM5 5W\/4AA LED Handheld Gigging Light. With the emergence of high-efficiency LEDs, the days of lugging around heavy generators are gone. Now, you can venture into the shallow waters, basked in adequate lighting, all the while embracing the serene silence of the night.\u003c\/p\u003e\n\u003ch4\u003eHow It Transforms Your Night-Time Adventures\u003c\/h4\u003e\n\u003cp\u003eMost seasoned giggers prefer installing multiple lights on their boat, often opting for 4 to 8 lights around the bow. This isn't just about illumination; it's about creating an environment. Imagine a platform built across the boat's bow, allowing for easy movement. Spotting flounder in the shallows becomes an effortless task. And for those concerned about battery placements? Tuck it under the platform. With a robust marine battery, powering up to 4 FL30 floodlights for a duration of 6-8 hours is a breeze.\u003c\/p\u003e\n\u003ch4\u003eThe Heart of the Operation\u003c\/h4\u003e\n\u003cp\u003eWhat truly makes the WM5 5W\/4AA LED Handheld Gigging Light stand out is its core technology. High-efficient and high-output LEDs are game-changers. They not only reduce the need for additional equipment but also ensure silent operations, amplifying the overall gigging experience.\u003c\/p\u003e\n\u003ch4\u003eHighlights to Look Out For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-efficiency, high-output LEDs\u003c\/li\u003e\n\u003cli\u003eSilent operations\u003c\/li\u003e\n\u003cli\u003eEliminates the need for noisy generators\u003c\/li\u003e\n\u003cli\u003eEasy installations, typically 4 to 8 lights around the boat's bow\u003c\/li\u003e\n\u003cli\u003eOptimal usage with marine batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hydro Glow","offers":[{"title":"Default Title","offer_id":51550997840118,"sku":"APL096254","price":129.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697813_apl096254_jpeg.jpg?v=1787806201"},{"product_id":"apl023259","title":"Garmin GFL 10 NMEA 2000 Fluid Level Analog Adapter, IPX7, Includes NMEA 2000 T-Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11326-00 is a GFL 10 fluid level analog adapter that puts your tank level data onto an NMEA 2000 network while keeping the existing analog sender or gauge in place. It is powered from the NMEA 2000 bus (9–16 Vdc), is NMEA 2000 certified (LEN 2, 100 mA), and has a total cable length of 16 ft (4.9 m).\u003c\/p\u003e\u003cp\u003eThe module is sealed to IEC 529 IPX7 and is meant for locations that may see washdowns rather than regular submersion. It measures 24.7 x 17.0 x 78.6 mm, weighs 365 g, and uses a thermoplastic rubber overmold with a PVC cable jacket and PVC overmolds at the connectors.\u003c\/p\u003e\u003cp\u003eOnce installed and configured, tank levels can be shown on compatible NMEA 2000-connected Garmin displays. The adapter supports tank setup and calibration so the readings match your boat’s sender and tank shape.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConverts analog fluid-level information from an existing resistive sender or analog gauge into NMEA 2000 data for display on compatible Garmin devices on the network.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 certified and bus-powered (9–16 Vdc), with 1 W max power usage and LEN 2 (100 mA) for network planning.\u003c\/li\u003e\n\u003cli\u003eIPX7 sealing to IEC 529 for typical marine washdown exposure, with an operating temperature range of -15°C to 70°C (5°F to 158°F).\u003c\/li\u003e\n\u003cli\u003e16 ft (4.9 m) total cable length and a small module footprint (24.7 x 17.0 x 78.6 mm) to tuck behind a panel or near a tank sender.\u003c\/li\u003e\n\u003cli\u003eSupports fluid type assignment, tank numbering, tank capacity entry, and level calibration using a minimum of two calibration points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter is intended for boats with an NMEA 2000 backbone and a fluid level sender or an analog gauge that represents tank level. It connects into the network through a standard NMEA 2000 T-connector and broadcasts fluid level information over the backbone.\u003c\/p\u003e\u003cp\u003eFor cleaner wiring, mount it within 173 in. (4.4 m) of the analog gauge or the fluid-level sensor so you can reach without extending bare-wire connections. Keep the module at least 2 in. (5 cm) from a magnetic compass to avoid interference.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eYou can wire the GFL 10 either at the back of the analog gauge or directly at the sender. When wiring to an analog gauge, the blue wire goes to the gauge sensor terminal, the white wire goes to gauge power\/ignition, and the black wire goes to ground; the yellow and red wires are unused. When wiring directly to a resistive sensor, the blue wire goes to the sender terminal and the black wire goes to ground; the white, yellow, and red wires are unused.\u003c\/p\u003e\u003cp\u003eAfter making connections, cover any exposed conductors with heat-shrink tubing. If wiring directly at a fuel tank sender, make the sender connections before connecting the adapter to the NMEA 2000 network to reduce spark risk near the tank.\u003c\/p\u003e\u003ch6\u003eNMEA 2000 integration\u003c\/h6\u003e\u003cp\u003eConnect the adapter into the NMEA 2000 backbone using the included T-connector. If the adapter cannot reach the backbone directly, a separate drop cable can be used up to 20 ft (6 m).\u003c\/p\u003e\u003cp\u003eIf your boat already has an NMEA 2000 network, it should already be powered. Keep the network to a single power source, as adding another power connection can cause network issues.\u003c\/p\u003e\u003ch6\u003eConfiguration and calibration\u003c\/h6\u003e\u003cp\u003eConfiguration is handled from a compatible Garmin display through the NMEA 2000 device list. You can set the fluid type, assign a tank number, and enter the tank capacity so the network data matches the tank being monitored.\u003c\/p\u003e\u003cp\u003eFluid level calibration is required, and it uses at least two calibration points. Adding more calibration points improves accuracy, especially on tanks that do not read linearly. If the reading shifts with engine RPM when connected through a gauge, the gauge type setting can be adjusted between Auto Detect, 1 Coil, and 2 Coil.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for boats that want digital tank levels on a chartplotter or instrument display while leaving existing senders and, when applicable, the original analog gauge in place. It also works well for multi-tank boats, where each tank can be identified with its own tank number and fluid type during setup.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551001641206,"sku":"APL023259","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694137_apl023259_jpeg.jpg?v=1787806298"},{"product_id":"apl476466","title":"Icom BC227 Rapid Charger with US Plug BC227","description":"\u003cp\u003e\u003cb\u003eIcom BC227 Rapid Charger\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ewith US Plug\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eModel: BC-227\u003c\/p\u003e\n\u003cp\u003eThe BC-227 is a single rapid charger for use with the Icom IC-F52D.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eType \/ Group\u003c\/td\u003e\n\u003ctd\u003eChargers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eCharge Slots\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x BC-227\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icom","offers":[{"title":"Default Title","offer_id":51551002886390,"sku":"APL476466","price":82.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1106596_apl476466jpg.jpg?v=1787806336"},{"product_id":"apl652826","title":"Lowrance - CVR-16 Screen Cover f\/Elite \u0026 Mark 5\" \u0026 Hook-5","description":"\u003ch4\u003eEmbark on a Safe Journey: Your Screen's Shield\u003c\/h4\u003e\n\u003cp\u003eThe CVR-16 Screen Cover is a dedicated guardian for your Lowrance Mark-5 and Elite-5 models. Each day on the water is unpredictable but ensuring the longevity and functionality of your marine equipment should remain a constant. The CVR-16 Screen Cover steps up to extend a protective shield against the harsh marine conditions, ensuring that every voyage is initiated with a screen free from scratches, dust, and other adversaries waiting to impede your navigation experience.\u003c\/p\u003e\n\u003ch4\u003eSuit of Armor: Technical Insights\u003c\/h4\u003e\n\u003cp\u003eYour equipment is as good as its readiness to perform when called upon. The CVR-16 Screen Cover, tailored to fit the specified Lowrance models, is constructed with a resilient material that boasts a track record of warding off the everyday wear and tear, leaving your screen unscathed even in the face of the unexpected.\u003c\/p\u003e\n\u003ch4\u003eThe Perfect Fit: Product Dimensions\u003c\/h4\u003e\n\u003cp\u003eThe dimensions of the CVR-16 Screen Cover are engineered to nestle perfectly over your Lowrance Mark-5 and Elite-5 models, adhering to the contours with precision, and securing the screen from the elements that seek to tarnish its clarity and functionality.\u003c\/p\u003e\n\u003ch4\u003eA Palette of Protection: Finishes\u003c\/h4\u003e\n\u003cp\u003eThe finishes on the CVR-16 Screen Cover are not only about aesthetic appeal but they resonate with the toughness and endurance which is synonymous with marine explorations. The sleek yet robust finish is a testament to its ability to be the silent guardian of your marine screen.\u003c\/p\u003e\n\u003ch4\u003eNoteworthy Mentions: Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDedicated protection for Lowrance Mark-5 and Elite-5 models.\u003c\/li\u003e\n\u003cli\u003eResilient material construction to combat daily wear and tear.\u003c\/li\u003e\n\u003cli\u003ePerfectly contoured to embrace the screen’s dimensions, ensuring a snug fit.\u003c\/li\u003e\n\u003cli\u003eSleek and enduring finish, blending aesthetics with functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdaptable Guardian: Variation Spectrum\u003c\/h4\u003e\n\u003cp\u003eThe CVR-16 Screen Cover stands as a universal sentinel for the following Lowrance models, embracing each with a protective grasp, ready to face the untamed marine environment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eElite-5\u003c\/li\u003e\n\u003cli\u003eElite-5x\u003c\/li\u003e\n\u003cli\u003eMark-5x\u003c\/li\u003e\n\u003cli\u003eMark-5x Pro\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51551005868278,"sku":"APL652826","price":22.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697397_apl652826_jpeg.jpg?v=1787806416"},{"product_id":"apl326083","title":"Garmin Montana Anti-Glare Screen Protectors, 3pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11654-05 is a set of anti-glare screen protectors made for Garmin Montana handheld GPS units, helping the display stay readable in bright sun while adding a sacrificial layer against fingerprints and scratches.\u003c\/p\u003e\u003cp\u003eOn a boat, a Montana often gets handled with damp hands and ends up in places like the helm, cockpit, or a grab bag where grit and hardware can scuff the screen. These protectors are a simple way to keep the touchscreen surface cleaner and reduce glare when the sun is bouncing off the water.\u003c\/p\u003e\u003cp\u003eThe pack includes 3 protectors, so you can replace one after it gets worn, scratched, or nicked during storage and transport.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAnti-glare film helps cut screen washout in direct sunlight at the helm or on deck\u003c\/li\u003e\n\u003cli\u003eHelps reduce fingerprint smudges from frequent touchscreen use\u003c\/li\u003e\n\u003cli\u003eAdds scratch protection against grit, sand, and rubbing inside a case or console\u003c\/li\u003e\n\u003cli\u003eMade to match Garmin Montana handheld GPS screen size for a cleaner fit\u003c\/li\u003e\n\u003cli\u003eIncludes 3 protectors in the package for spares and replacements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e3 anti-glare screen protectors\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis set is intended for Garmin Montana handhelds in the Montana 600\/610\/650\/680 family, including “t” and camo variants. Match the model name shown on the unit (or in its settings menu) before ordering, since other Montana generations use different screen sizes.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eApply the protector in a clean, low-dust area. Wipe the screen until it is completely free of salt residue, sunscreen, and lint, then dry it so the adhesive can bond evenly.\u003c\/p\u003e\u003cp\u003eLine up the protector carefully before it touches the screen. Once the edge is set, work across the display with steady pressure to push out trapped air. If you see a bubble, lift that edge slightly and re-seat it rather than forcing it flat over debris.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical add-on for boaters who use a Montana as a backup navigator, a tender or kayak GPS, or a handheld for fishing and coastal exploring where sunlight glare makes the display harder to read. It is also helpful for crews who pass the unit around and want the screen to stay cleaner between quick position checks.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse and wipe the unit with fresh water after salty runs, then dry with a soft cloth to avoid grinding salt crystals into the surface. If the protector becomes heavily scratched or starts lifting at an edge, replace it to keep the screen easy to read and protect the original display underneath.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551084806390,"sku":"APL326083","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694178_apl326083_jpeg.jpg?v=1787807461"},{"product_id":"apl426321","title":"Furuno - 000-158-002 Power Cable","description":"\u003ch4\u003eDive Deep with Our Power Cable Assembly\u003c\/h4\u003e\n\u003cp\u003eImmerse into the powerful world of marine adventures with our robust 3-meter Power Cable Assembly, tailored specifically for maritime applications. Connect, power, and energize your marine devices with unmatched efficiency.\u003c\/p\u003e\n\u003c!-- Since there's no Manufacturer Part Number, we exclude that part --\u003e\n\u003ch4\u003eAssembly Blueprint \u0026amp; Craftsmanship\u003c\/h4\u003e\n\u003cp\u003eOur power cable assembly is designed with meticulous attention to detail, ensuring a robust and long-lasting connection in the marine environment. Each component, from the connectors to the cable sheath, is crafted to resist the challenges of saltwater, pressure, and wear and tear.\u003c\/p\u003e\n\u003ch4\u003eEssential Dimensions Unveiled\u003c\/h4\u003e\n\u003cp\u003eThis 3-meter masterpiece is not just lengthy but also perfectly balanced to deliver optimum performance. It is tailored to fit seamlessly into your marine setup, ensuring minimal hindrance and maximum functionality.\u003c\/p\u003e\n\u003c!-- No Color Temperature is mentioned so we omit that section --\u003e\u003c!-- No Finishes are mentioned so we omit that section --\u003e\n\u003ch4\u003eKey Takeaways\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3-meter length for versatile usage\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for maritime applications\u003c\/li\u003e\n\u003cli\u003eRobust build to endure marine challenges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551092408566,"sku":"APL426321","price":57.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696674_apl426321_jpeg.jpg?v=1787807516"},{"product_id":"apl340154","title":"NavPod - PED5200 PedestalPod Uncut - Carbon Black","description":"\u003ch4\u003eUnleash Superior Protection for Your Marine Electronics: The NavPod PED5200 PedestalPod\u003c\/h4\u003e\n\u003cp\u003eImagine navigating calm waters with the confidence of knowing your fishfinder or chartplotter is securely protected from the elements. The NavPod PED5200 PedestalPod transforms how you mount your essential marine electronics, providing unmatched security, convenience, and superior weather protection.\u003c\/p\u003e\n\u003ch4\u003eBuilt to Withstand the Harsh Marine Environment\u003c\/h4\u003e\n\u003cp\u003eForget bulky and unsightly bracket mounts. The NavPod PED5200 PedestalPod represents a superior solution. This sturdy yet aesthetically pleasing mount encases your fishfinder or chartplotter in a protective shell, shielding it from harsh saltwater spray, damaging UV rays, and even physical impact. This ensures your electronics remain safe and operational throughout every nautical adventure.\u003c\/p\u003e\n\u003ch4\u003eEnhanced Usability and Theft Deterrence\u003c\/h4\u003e\n\u003cp\u003eThe NavPod PED5200 PedestalPod isn't just about protection. It's designed to enhance your boating experience as well. By positioning your fishfinder or chartplotter at a comfortable 20-inch offset from the deck and angled at 45 degrees, the NavPod provides optimal viewing for effortless monitoring and control of your device. This improved ergonomics makes it easier to adjust settings, zoom in on targets, or even control your trolling motor without needing to constantly bend or stretch.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the secure design deters would-be thieves. The double-gasketed system creates a watertight seal, while the heavy-duty aluminum pedestal and nickel-chrome plated stainless steel tamperproof screws discourage theft attempts. This gives you peace of mind knowing your valuable electronics are safeguarded against both the environment and opportunistic theft.\u003c\/p\u003e\n\u003ch4\u003eClean Installation and Internal Cable Management\u003c\/h4\u003e\n\u003cp\u003eThe NavPod PED5200 PedestalPod offers a clean and professional look for your boat. Your fishfinder or chartplotter can be easily flush-mounted into the pre-cut face of the NavPod, eliminating unsightly wires and creating a streamlined appearance. Additionally, the spacious 1.75-inch opening within the pedestal allows for internal cable management. This keeps your wires protected from the elements, organized, and out of the way, preventing accidental snags or damage.\u003c\/p\u003e\n\u003ch4\u003eInvest in Confidence and Convenience\u003c\/h4\u003e\n\u003cp\u003eThe NavPod PED5200 PedestalPod is the perfect upgrade for any boater who demands superior protection, convenience, and peace of mind for their marine electronics. With its unmatched durability, theft-deterrent design, and user-friendly features, the NavPod ensures your fishfinder or chartplotter remains protected and easily accessible during every voyage, allowing you to focus on navigating and experiencing the thrill of the open water.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51551122161910,"sku":"APL340154","price":519.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708544_apl024443.jpg?v=1787792099"},{"product_id":"apl876069","title":"Lowrance - Explorer Ice Shuttle \u0026 ActiveTarget™ Kit - No Display","description":"\u003ch4\u003eDive Beneath the Ice: A Revolutionary Fishing Experience\u003c\/h4\u003e\n\u003cp\u003eExperience the thrill of watching fish react to your lure in real-time with the groundbreaking ActiveTarget® Live Sonar Ice Fishing Kit. Whether you're an experienced angler or a beginner, this kit is designed to enhance your ice fishing adventures and give you an edge over the elusive underwater world.\u003c\/p\u003e\n\u003ch4\u003eKey Features that Set You Apart\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReal-time insights with ActiveTarget® Live Sonar Transducer\u003c\/li\u003e\n\u003cli\u003e10ft Transducer Cable for extended reach\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for use with HDS LIVE or Elite FS display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInside the Explorer's Treasure Box\u003c\/h4\u003e\n\u003cp\u003eYour kit comes packed with everything you need to elevate your fishing game:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eActive Target armed with a 10' Transducer Cable\u003c\/li\u003e\n\u003cli\u003eLuxurious Explorer Bag paired with a robust Shuttle Frame\u003c\/li\u003e\n\u003cli\u003eTop-tier Ice Transducer Pole for ActiveTarget in Down\/Forward or Scout modes\u003c\/li\u003e\n\u003cli\u003ePowerful 24 Ah Lithium Battery featuring dual USB charging ports and an integrated voltage meter\u003c\/li\u003e\n\u003cli\u003eExpertly designed custom wiring harness accompanied by a master power switch\u003c\/li\u003e\n\u003cli\u003e2' Ethernet Cable for seamless connectivity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCherry on Top: Extra Highlights\u003c\/h4\u003e\n\u003cp\u003eThis ActiveTarget® Ice Fishing Kit is sold as a complete package, ensuring you have everything at your fingertips for an unmatched fishing experience.\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51551140282614,"sku":"APL876069","price":1549.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697562_apl876069_jpeg.jpg?v=1787808481"},{"product_id":"apl155945","title":"Garmin Power\/Data Cable, Bare Wires, For Fishfinder 320C, GPS Series, GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10083-00 is a 7-pin power\/data cable with bare-wire leads for hard-wiring compatible Garmin Fishfinder, GPS, and GPSMAP units into your boat’s DC system and passing navigation data to other electronics.\u003c\/p\u003e\u003cp\u003eAt the display end, the molded 7-pin plug mates with Garmin units that use the older 7-pin power\/data port. At the other end, individual bare wires let you terminate to a breaker panel, terminal strip, or splices for a permanent install that is easier to service than a loose adapter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e7-pin connector fits Garmin units that use the 7-pin power\/data socket (examples include Fishfinder 320C, GPS 120\/126\/128\/152\/152H, and GPSMAP 130\/162\/175\/182\/182C\/192C\/205\/210\/215\/220\/225\/230\/232\/235 Sounder).\u003c\/li\u003e\n\u003cli\u003eBare-wire leads support clean, permanent hard-wiring to a boat’s DC distribution instead of using temporary plug-in power.\u003c\/li\u003e\n\u003cli\u003eIncludes data conductors so the connected GPS can share position and speed output with compatible equipment such as an autopilot, computer, or radar interface.\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement harness when the original cable is damaged, shortened, or has corroded terminations, without changing the unit-side connector.\u003c\/li\u003e\n\u003cli\u003eBare-wire termination works well with crimp connectors, solder-and-seal splices, or a screw-terminal block, depending on how your helm wiring is laid out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector style first: this cable is for Garmin equipment that takes a 7-pin power\/data plug. If your unit uses a different connector family, the plug will not seat correctly even if the product name sounds close.\u003c\/p\u003e\u003cp\u003eOn the boat side, plan where the bare-wire end will land. Many installs run the harness to a protected point behind the console, then transition to the vessel wiring on a terminal strip so the display can be removed later without cutting wires.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eRoute the cable like any other helm harness: keep it supported, avoid tight bends, and protect it anywhere it could chafe on fiberglass edges or metal brackets. Leave a service loop behind the unit so you can pull the display forward for access.\u003c\/p\u003e\u003cp\u003eTerminate power through the correct fuse or breaker for your specific Garmin unit, and make data connections only after confirming the receiving device expects the same type of GPS data output. When tying into other electronics, label the conductors and keep splices sealed and out of bilge splash zones.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good fit for skippers keeping an older 7-pin Garmin display in service and wanting a tidy hard-wire install at the helm. It also makes sense when you need to share GPS position from the plotter to other equipment and prefer a direct wired connection over add-on adapters.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551144968438,"sku":"APL155945","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694052_apl155945_jpeg.jpg?v=1787808731"},{"product_id":"apl476382","title":"Icom BC173-01 DROP-IN Smart Charger Requires BC174A11 BC173 01","description":"\u003cp\u003e\u003cb\u003eIcom BC173-01 DROP-IN Smart Charger Requites BC174A11\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eModel: BC17301\u003c\/p\u003e\n\u003cp\u003eCharger, For Use With Mfr. No. M36, Charges Up To 1 Unit, Charge Time 12 hr., Voltage 110, Height 2 In., Length 3-1\/2 In., Width 2-3\/4 In., Material ABS Plastic, Standards CE Approved, Includes AC Wall Adapter, Manufacturers Warranty Length 1 yr.\u003c\/p\u003e\n\u003cb\u003eSpecifications\u003c\/b\u003e\n\u003ctable style=\"border-collapse: collapse\" width=\"95%\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eZoro #\u003c\/td\u003e\n\u003ctd\u003eG6413307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eMfr #\u003c\/td\u003e\n\u003ctd\u003eBC173 01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eCharges Up To\u003c\/td\u003e\n\u003ctd\u003e1 Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eIncludes\u003c\/td\u003e\n\u003ctd\u003eAC Wall Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eCharge Time\u003c\/td\u003e\n\u003ctd\u003e12 hr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eManufacturers Warranty Length\u003c\/td\u003e\n\u003ctd\u003e1 yr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e2-3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e110\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eCE Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eItem\u003c\/td\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eFor Use With\u003c\/td\u003e\n\u003ctd\u003eMfr. No. M36\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"175px\"\u003eLength\u003c\/td\u003e\n\u003ctd\u003e3-1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cb\u003eHeight\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Icom","offers":[{"title":"Default Title","offer_id":51551152013558,"sku":"APL476382","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1106593_apl476382jpg.jpg?v=1787809082"},{"product_id":"apl859970","title":"Garmin echoMAP CHIRP 5x Tilt\/Swivel Quick-Release Mount, Quick Cable Disconnect","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12445-13 is a tilt and swivel quick-release mounting bracket for echoMAP CHIRP 5x series displays. It keeps your chartplotter where you can see it at the helm and lets you adjust the viewing angle to cut glare when you move from sitting to standing.\u003c\/p\u003e\u003cp\u003eThe quick cable disconnect means the wiring stays on the bracket while the display seats and unseats from the cradle. It fits echoMAP CHIRP 52cv, 52dv, 53cv, 53dv, 54cv, 54dv, 55cv, and 55dv units.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTilt and swivel adjustment for comfortable viewing from different helm positions.\u003c\/li\u003e\n\u003cli\u003eQuick-release cradle lets the display be removed without undoing the mounted wiring.\u003c\/li\u003e\n\u003cli\u003eCable connections stay on the bracket, which helps keep the helm tidy when the unit is taken off the boat.\u003c\/li\u003e\n\u003cli\u003eMade for Garmin echoMAP CHIRP 52cv\/52dv\/53cv\/53dv\/54cv\/54dv\/55cv\/55dv.\u003c\/li\u003e\n\u003cli\u003eNot compatible with similarly named non-CHIRP echoMAP models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch your unit name exactly before ordering. This bracket is for echoMAP CHIRP 5x models (52, 53, 54, and 55 in cv or dv). If your display is an older echoMAP model without CHIRP in the name, it uses a different mount.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the base on a flat surface where the screen can tilt through its range without hitting a windshield frame, throttle, or electronics box lid. Use fasteners suited to your mounting surface and add backing support on thin fiberglass panels. Route cables with a drip loop and enough slack for the swivel movement, then click the display in place when you are ready to run.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of mount works well on small center consoles, skiffs, and sailboat pedestals where you want the screen to swing toward the helm or cockpit seating. The quick release is also handy for trailering or locking the display in the cabin while leaving the bracket installed.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the bracket with fresh water after saltwater use and wipe it dry before snapping the display back in. Periodically check mounting fasteners for tightness and keep the connector area free of grit so the unit seats fully.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551153422582,"sku":"APL859970","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697278_apl859970_jpeg.jpg?v=1787809137"},{"product_id":"apl473337","title":"Furuno - Suncover f\/FCV858","description":"\u003ch4\u003eDive Deeper into Protection\u003c\/h4\u003e\n\u003cp\u003eShield your valuable Furuno's FCV585 display from the sun's harmful rays with our premium Suncover.\u003c\/p\u003e\n\u003ch4\u003eEngineered Excellence\u003c\/h4\u003e\n\u003cp\u003eOur Suncover is meticulously designed to offer a snug fit for the FCV585 display, ensuring the screen remains unscathed even under the harshest sun.\u003c\/p\u003e\n\u003ch4\u003eFinishing Touches that Last\u003c\/h4\u003e\n\u003cp\u003eWith an optimal blend of durability and aesthetics, the Suncover not only acts as a protective layer but also accentuates the look of your Furuno's FCV585.\u003c\/p\u003e\n\u003ch4\u003eBasking in the Sun, Minus the Harm\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures screen longevity by guarding against UV rays.\u003c\/li\u003e\n\u003cli\u003eCustomized fit to prevent accidental slips and drops.\u003c\/li\u003e\n\u003cli\u003eEnhances the look of your FCV585 display.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551153750262,"sku":"APL473337","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697010_apl473337_jpeg.jpg?v=1787809144"},{"product_id":"apl303726","title":"Furuno - 10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3","description":"\u003ch4\u003eDive Deeper with the Right Connector: The Ultimate Adapter for TZT3\u003c\/h4\u003e\n\u003cp\u003eEver faced compatibility issues with your marine equipment? Say no more. Presenting the perfect solution that bridges the gap between your devices.\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecific ends: 10-Pin to 12-Pin\u003c\/li\u003e\n\u003cli\u003eConvenient length: 0.4m\u003c\/li\u003e\n\u003cli\u003eExclusively designed for Furuno's TZT3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEssential Details to Know\u003c\/h4\u003e\n\u003cp\u003eWhile this adapter serves a crucial purpose, it's essential to note that it may not be returned to the initial point of purchase. For any assistance or inquiries, the manufacturer is your go-to resource.\u003c\/p\u003e\n\u003ch4\u003eProduct's Vital Stats:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 0.4m\u003c\/p\u003e\n\u003ch4\u003eHighlights to Boast\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffortless Compatibility: Seamlessly connects with TZT3\u003c\/li\u003e\n\u003cli\u003eDurable Build: Ensures longevity\u003c\/li\u003e\n\u003cli\u003eCompact: Handy 0.4m length makes it easy to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551155421430,"sku":"APL303726","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697018_apl303726_jpeg.jpg?v=1787809217"},{"product_id":"apl807584","title":"Garmin GPSMAP 4xx Series Protective Sun Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10911-00 is a protective cover for compatible GPSMAP 4xx and 400-series display units. It slips over the face of the unit to keep the screen and keypad covered when the boat is parked at the dock, stored on a trailer, or tied up for the week.\u003c\/p\u003e\u003cp\u003eThis cover is a simple way to cut down on sun exposure, salt spray, and day-to-day scuffs that build up on exposed displays. It is lightweight at about 0.15 lb, so it is easy to stow in a console or nav station when you are underway.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eProtective cover sized for Garmin GPSMAP 4xx and select 400-series displays\u003c\/li\u003e\n\u003cli\u003eCovers the face of the unit to help shield the screen and keys from spray, sun, and scratches while moored or trailering\u003c\/li\u003e\n\u003cli\u003eCompatible with Fishfinder 400C, GPSMAP 420\/420s, GPSMAP 421, GPSMAP 430\/430s, GPSMAP 431, GPSMAP 440\/440s, and GPSMAP 441\/441s\u003c\/li\u003e\n\u003cli\u003eLightweight accessory at about 0.15 lb for easy storage on board\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover is specific to the Garmin GPSMAP 4xx form factor and the compatible 400-series units listed above. If your display is from a different GPSMAP series or a different screen size, the fit will be off, so it is worth confirming the exact model on your bezel before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eFit is straightforward: align the cover to the face of the display and press it into place until it seats evenly. For best results, wipe down the screen and keys first so grit is not trapped between the cover and the display.\u003c\/p\u003e\u003cp\u003eOn boats that live outside, many owners keep the cover on whenever the display is not in use, then remove it before running. It is also a good match for trailered boats where road dust and strap contact can mark up an uncovered screen.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water if it gets hit with salt spray, then let it dry before reinstalling or stowing. Avoid harsh solvents or abrasive pads that can haze the surface over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eProtective cover for compatible GPSMAP 4xx and 400-series displays\u003c\/li\u003e\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551155683574,"sku":"APL807584","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694228_apl807584_jpeg.jpg?v=1787809231"},{"product_id":"apl224203","title":"Garmin ECHOMAP UHD 9Xsv Boat Kit, GT56UHD-TM Transducer, CHIRP\/ClearVü\/SideVü Sonar, Tilt\/Swivel Mount with Quick-Release Cradle, Power\/Data Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 020-00200-23 is a boat-install kit for an ECHOMAP UHD 9Xsv combo, built around a 9 inch display format and a GT56UHD-TM transom-mount transducer.\u003c\/p\u003e\u003cp\u003eIt is meant for the common setup where you already own a compatible ECHOMAP UHD unit and want the right transducer, power\/data wiring, and mounting hardware to run it on a boat. Sonar coverage is set up for traditional CHIRP plus ClearVü and SideVü scanning.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBoat conversion kit for 9 inch ECHOMAP UHD 9Xsv combos, useful when moving a unit from an ice setup to a helm install.\u003c\/li\u003e\n\u003cli\u003eGT56UHD-TM transom-mount transducer supports traditional CHIRP, ClearVü, and SideVü scanning sonar.\u003c\/li\u003e\n\u003cli\u003eTilt\/swivel bail mount with a quick-release cradle keeps the display easy to adjust and remove at the dock.\u003c\/li\u003e\n\u003cli\u003eIncludes ECHOMAP power\/data cable for a clean, hardwired install.\u003c\/li\u003e\n\u003cli\u003eListed compatibility with ECHOMAP UHD 92sv, 93sv, 94sv, and 95sv units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is for the 9 inch ECHOMAP UHD sv family. Confirm your display model matches the compatible devices list (ECHOMAP UHD 92sv, 93sv, 94sv, 95sv) before ordering, especially if you are converting an ice bundle for open-water use.\u003c\/p\u003e\u003cp\u003eThe included transducer is a transom-mount style, so it fits boats where the stern has clean water flow at speed. If your hull shape, brackets, or inboard running gear make transom mounting difficult, plan the transducer location carefully before you drill.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePick a display location where the mount can swing freely and the screen stays readable from the helm. When you set the quick-release cradle, leave enough service loop in the cable so you can remove the unit without tugging on the connector.\u003c\/p\u003e\u003cp\u003eFor the transducer, a level install and careful cable routing make the biggest difference. Keep the run tidy, protect it anywhere it passes through a bulkhead, and check the bracket fasteners after the first few trips to account for vibration.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGT56UHD-TM transducer\u003c\/li\u003e\n\u003cli\u003eECHOMAP power\/data cable\u003c\/li\u003e\n\u003cli\u003eBail mount with tilt\/swivel action and quick-release cradle\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eSafety notice\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551157944566,"sku":"APL224203","price":549.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695880_apl224203_jpeg.jpg?v=1787809364"},{"product_id":"apl879135","title":"Garmin SD Card Door, For GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12167-00 is a replacement SD card door that covers the memory-card bay on select Garmin marine displays. It restores the protective door that keeps the card seated and the slot covered when the helm is exposed to spray, salt residue, and routine washdowns.\u003c\/p\u003e\u003cp\u003eThis door is used on GPSMAP 7408, 7410, 7412, 7416 (including xsv versions), GPSMAP 7608, 7610, 7612, 7616 (including xsv versions), and GPSMAP 1222 and 1242 Plus or Touch models (including xsv versions). It is also listed for the Volvo Penta Glass Cockpit System.\u003c\/p\u003e\u003cp\u003eIt is a small service part, but it matters if you swap chart or sonar cards, keep a card installed full time, or simply want the card area closed and protected again after the original door cracks or goes missing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement SD card door for the physical memory-card access opening on compatible marine displays\u003c\/li\u003e\n\u003cli\u003eHelps keep the memory card seated and the slot covered from grime and splash at the helm\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 7408, 7410, 7412, 7416 (including xsv versions)\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 7608, 7610, 7612, 7616 (including xsv versions)\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 1222 and 1242 Plus or Touch models (including xsv versions) and the Volvo Penta Glass Cockpit System\u003c\/li\u003e\n\u003cli\u003eNo wiring or software setup involved; this part replaces the door only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBecause Garmin uses different door shapes across families and generations, match your unit by model and by the style of the existing card door. If your display is from a different GPSMAP series than those listed above, this door may not seat or latch correctly even if it looks similar at a glance.\u003c\/p\u003e\u003cp\u003eThis part is for the card door itself. Charts, memory cards, and other hardware are not part of the door replacement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it the same way as the original door: remove the damaged or missing door, fit the replacement in place, then check that it closes fully and stays closed under light vibration. After installation, confirm the card inserts and ejects normally and that the door does not bind when opened and closed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fix for boats that run with a flush-mounted helm display, see frequent card changes for chart regions, or keep a chart card installed year-round. It is also a good match for owners who want the card bay covered again before the boat goes back into saltwater service.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the helm area with fresh water and wipe dry so grit does not build up around the door. Avoid harsh solvents on the door and surrounding bezel to prevent surface damage over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551159943414,"sku":"APL879135","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695617_apl879135_jpeg.jpg?v=1787809475"},{"product_id":"apl807770","title":"Lowrance - Pro Power Battery Kit f\/HOOK Reveal","description":"\u003ch4\u003eUnlock the Power of the Deep\u003c\/h4\u003e\n\u003cp\u003eDive deep into the marine world with the Pro Power Battery Kit specially designed for HOOK Reveal displays. This compact, lightweight solution is a must-have for every kayak or small boat enthusiast.\u003c\/p\u003e\n\u003ch4\u003eCrucial Technical Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompact and lightweight design\u003c\/li\u003e\n\u003cli\u003eGuaranteed longevity with 300+ rechargeable cycles\u003c\/li\u003e\n\u003cli\u003e12V, 10 amp hour powerful battery\u003c\/li\u003e\n\u003cli\u003eSecure waterproof dual-pin connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the Package?\u003c\/h4\u003e\n\u003cp\u003eThe complete Lowrance Pro Power Kit is packed with essentials like the HOOK Reveal connection cable, a 12V battery, a highly efficient battery charger, and to top it all off, a durable ballistic nylon case with an additional padded battery sleeve for that extra layer of safety.\u003c\/p\u003e\n\u003ch4\u003eFinest Features at a Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless plug-and-play operation with HOOK Reveal\u003c\/li\u003e\n\u003cli\u003eWater-resistant exterior for an uninterrupted experience\u003c\/li\u003e\n\u003cli\u003eLong-lasting battery life for extended journeys\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51551175999734,"sku":"APL807770","price":167.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697555_apl807770_jpeg.jpg?v=1787810022"},{"product_id":"apl806261","title":"Lenco Marine - Top \u0026 Bottom Mounting Bracket Kit - With Hardware for Pro Control","description":"\u003ch4\u003eReliable Mounting Solution for Lenco Pro Control\u003c\/h4\u003e\u003cp\u003eEnsure a secure and stable installation with the Lenco Top and Bottom Mounting Bracket Kit, designed specifically for Pro Control systems. This kit provides a durable and precise mounting solution, allowing for easy integration into marine applications. Crafted for longevity, it ensures a firm hold even in challenging marine environments, making it a reliable choice for boat owners and professionals seeking enhanced control performance.\u003c\/p\u003e\u003ch4\u003eBuilt for Marine Durability\u003c\/h4\u003e\u003cp\u003eConstructed to withstand the demanding conditions of marine environments, this mounting bracket kit features high-quality materials that resist corrosion and wear. Designed for seamless installation, it offers a robust foundation for Lenco Pro Control systems, ensuring long-term reliability and performance.\u003c\/p\u003e\u003ch4\u003eComplete Installation Hardware Included\u003c\/h4\u003e\u003cp\u003eThe kit includes all necessary hardware for a straightforward installation process. With precision-engineered components, it simplifies mounting, allowing for a hassle-free setup while ensuring a firm and stable fit.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSpecifically designed for Lenco Pro Control systems\u003c\/li\u003e\n\u003cli\u003eHigh-quality construction for marine durability\u003c\/li\u003e\n\u003cli\u003eIncludes necessary hardware for secure mounting\u003c\/li\u003e\n\u003cli\u003eProvides a reliable and stable installation solution\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant for long-lasting performance in marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis mounting bracket kit is an essential component for optimizing the performance and stability of your Lenco Pro Control system, offering both reliability and ease of installation.\u003c\/p\u003e","brand":"Lenco Marine","offers":[{"title":"Default Title","offer_id":51551176556790,"sku":"APL806261","price":43.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834928_apl806261.jpg?v=1787810049"},{"product_id":"apl130671","title":"Furuno - DRS AX \u0026 NXT Signal Power Cable - 10M","description":"\u003ch4\u003eDelve Into the Deep with the Power Cable\u003c\/h4\u003e\n\u003cp\u003eDRS AX \u0026amp; NXT Signal Power Cable - 10M\u003c\/p\u003e\n\u003ch4\u003eCrucial Specs at a Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned especially for DRS AX and NXT systems\u003c\/li\u003e\n\u003cli\u003eGenerous 10-meter length for versatile usage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat to Remember\u003c\/h4\u003e\n\u003cp\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/p\u003e\n\u003ch4\u003eExciting Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless integration with DRS systems\u003c\/li\u003e\n\u003cli\u003eProvides both signal and power connectivity\u003c\/li\u003e\n\u003cli\u003eOptimized for marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eA World of Variations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDRS AX \u0026amp; NXT Signal Power Cable - 10M\u003c\/li\u003e\n\u003c!-- Add other variations here as needed --\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551227183350,"sku":"APL130671","price":140.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697087_apl130671_jpeg.jpg?v=1787810695"},{"product_id":"apl457518","title":"Simrad NAIS-500 Class B AIS Transponder Kit, NSPL-500 VHF\/AIS\/FM Antenna Splitter, GPS-500 GPS Antenna, NMEA 2000, IPX7, 9.6-31.2V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13963-001 is a Class B AIS transceiver kit that combines the NAIS-500 AIS unit with an NSPL-500 VHF\/AIS\/FM antenna splitter, a GPS-500 antenna, and NMEA 2000 network hardware. It runs on 12 V or 24 V systems with a 9.6 to 31.2 V DC input range, and connects into onboard electronics using NMEA 2000, NMEA 0183, or USB.\u003c\/p\u003e\u003cp\u003eOn the water, it lets you transmit your vessel information while also receiving AIS targets from other boats, so your chartplotter or PC can show who is around you and where they are headed. The NAIS-500 is water resistant to IP67 and has a compact footprint at 152 x 98 x 52 mm, which helps when space is tight behind a helm or inside an electronics locker.\u003c\/p\u003e\u003cp\u003eThe included NSPL-500 splitter is there to simplify the RF side of the install by letting one VHF antenna serve VHF voice, AIS, and FM, instead of adding a second antenna and another coax run.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWide input range for 12 V or 24 V systems: 9.6 to 31.2 V DC\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 networking (LEN=1) plus NMEA 0183 and USB for flexible integration\u003c\/li\u003e\n\u003cli\u003eTwo bi-directional NMEA 0183 ports with default speeds of 38,400 baud and 4,800 baud\u003c\/li\u003e\n\u003cli\u003eWater resistance: NAIS-500 rated to IP67; NSPL-500 rated to IPX7\u003c\/li\u003e\n\u003cli\u003eConnectors that match common marine cabling: SO-239 VHF antenna connector on the AIS unit and an SMA connector for the external GPS antenna\u003c\/li\u003e\n\u003cli\u003eNSPL-500 supports one-antenna installs for VHF\/AIS\/FM, with no insertion loss on AIS and VHF receive and low insertion loss on AIS and VHF transmit\u003c\/li\u003e\n\u003cli\u003eLow draw for everyday use: average power consumption is 180 mA at 12 VDC (peak current rating 2 A at 12 VDC)\u003c\/li\u003e\n\u003cli\u003eEnvironmental specs that suit real boat conditions: operating temperature from -15°C to +55°C and tested to IEC 60945 \"Protected\" category\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eFor modern networks, the cleanest setup is typically NMEA 2000: the AIS data becomes available to any compatible display on the backbone, and the unit presents a standard NMEA 2000 connector. If you are feeding older equipment, the NMEA 0183 ports can output AIS at 38,400 baud while keeping a 4,800 baud port available for other NMEA 0183 devices.\u003c\/p\u003e\u003cp\u003eUSB is available for configuration, monitoring, and troubleshooting through NAIS System Configurator, which is also useful for confirming GPS reception during setup.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the install around three things: a protected mounting spot for the AIS unit, a clean RF path for the VHF antenna through the splitter, and a GPS antenna location with a clear view of the sky. The NAIS-500 is small enough to mount close to the helm electronics, which helps keep data and antenna cabling tidy.\u003c\/p\u003e\u003cp\u003eWith the NSPL-500 in the system, your existing VHF antenna line is routed through the splitter so the AIS and VHF radio can share it, and the splitter also provides an FM connection for a compatible stereo. The GPS-500 connects to the AIS unit through the external GPS antenna port.\u003c\/p\u003e\u003cp\u003eUntil the unit is configured, it will receive AIS messages but will not transmit. Configuration requires details such as MMSI, vessel name, vessel type, call sign, and vessel dimensions; MMSI programming is a one-time step. After initial setup, it may take up to six minutes for your full vessel details to become visible to others.\u003c\/p\u003e\u003cp\u003eAn external switch can be wired for silent mode, which stops transmitting your own position while continuing to receive other vessels.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup fits boats that spend time in busy approaches, shipping lanes, and crowded harbors where knowing what traffic is doing matters. It also makes sense for sailboats and powerboats that want an AIS transceiver without adding a second VHF antenna, while keeping current draw modest for longer days away from shore power.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eN2K-T-RD Network T-Connector\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 6 ft Network Extension Cable\u003c\/li\u003e\n\u003cli\u003eNSPL-500 Antenna Splitter\u003c\/li\u003e\n\u003cli\u003eNAIS-500 Class B AIS\u003c\/li\u003e\n\u003cli\u003eGPS-500: GPS antenna for NAIS-500 AIS transceiver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":51551388958966,"sku":"APL457518","price":1189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697709_apl457518_jpeg.jpg?v=1787811572"},{"product_id":"apl422992","title":"NavPod - PP4900 PowerPod Uncut","description":"\u003ch4\u003eUnleash Ultimate Offshore Protection: The NavPod PP4900 PowerPod (Uncut)\u003c\/h4\u003e\n\u003cp\u003eCarving through rough offshore waters demands uncompromising protection for your vital marine electronics. The NavPod PP4900 PowerPod (Uncut) answers the call, delivering unmatched strength, security, and weatherproof integrity for the serious boater.\u003c\/p\u003e\n\u003ch4\u003eBuilt to Withstand the Offshore Challenge\u003c\/h4\u003e\n\u003cp\u003eForget flimsy brackets that leave your electronics vulnerable. The NavPod PP4900 PowerPod (Uncut) is constructed with heavy-duty materials that can handle everything the harsh offshore environment throws your way. The Gen3 enhancements include thicker-gauge acrylic-capped ABS plastic, providing superior structural rigidity and improved impact resistance.\u003c\/p\u003e\n\u003ch4\u003eUnmatched Waterproof Protection\u003c\/h4\u003e\n\u003cp\u003eSea spray and hostile conditions are no match for the NavPod PP4900 PowerPod (Uncut)'s advanced waterproofing system. A double-gasket design featuring a thicker external silicone gasket and a 50% thicker internal Polyurathane gasket creates an impenetrable seal, keeping your electronics safe and dry season after season. These superior gaskets maintain their integrity even after repeated opening and closing of the NavPod, ensuring long-lasting protection.\u003c\/p\u003e\n\u003ch4\u003eSecure and Streamlined Installation\u003c\/h4\u003e\n\u003cp\u003eThe NavPod PP4900 PowerPod (Uncut) offers uncut freedom for custom installation. This model allows you to create the perfect fit for your specific electronics, providing maximum protection and a clean, streamlined aesthetic on your boat. The spacious 1.8-inch opening in the swivel tube facilitates easy cable management, keeping wires organized and protected from damage.\u003c\/p\u003e\n\u003ch4\u003eBuilt-in Theft Deterrence\u003c\/h4\u003e\n\u003cp\u003eThe NavPod PP4900 PowerPod (Uncut) incorporates nickel-chrome plated stainless-steel tamperproof screws. These high-security fasteners discourage theft attempts, providing peace of mind knowing your valuable electronics are safeguarded.\u003c\/p\u003e\n\u003ch4\u003eA Decade of Quality You Can Trust\u003c\/h4\u003e\n\u003cp\u003eThe NavPod brand is committed to excellence. Every NavPod PP4900 PowerPod (Uncut) is backed by a confident 10-year warranty, a testament to the unmatched quality and durability of this exceptional marine electronics mounting solution.\u003c\/p\u003e","brand":"NavPod","offers":[{"title":"Default Title","offer_id":51551538217206,"sku":"APL422992","price":469.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0708562_apl007458.jpg?v=1787811932"},{"product_id":"apl117588","title":"Lowrance - Adapter Cable - 7-Pin Blue to Bare Wires","description":"\u003ch4\u003eUnleashing Seamless Connections: The Marine Adapter Cable\u003c\/h4\u003e\n\u003cp\u003eDive into the world of seamless marine connectivity with our state-of-the-art adapter cable. Crafted with precision, this cable is designed to bridge the gap between 7-pin BLUE connections to bare wires, ensuring a smooth and uninterrupted flow of information between your marine devices.\u003c\/p\u003e\n\u003ch4\u003eAn In-Depth Dive: What Makes it Tick\u003c\/h4\u003e\n\u003cp\u003eOur adapter cable boasts impeccable craftsmanship, suitable for any marine environment. Whether you're navigating the high seas or setting anchor at a tranquil bay, this cable will ensure that all your devices remain interconnected, bringing you the ultimate in marine electronic reliability.\u003c\/p\u003e\n\u003ch4\u003eSpotlight Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 7-pin BLUE connections\u003c\/li\u003e\n\u003cli\u003ePremium-grade material ensuring longevity\u003c\/li\u003e\n\u003cli\u003eSmooth transition to bare wire endpoints\u003c\/li\u003e\n\u003cli\u003ePerfect for any marine setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51551661424886,"sku":"APL117588","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697415_apl117588_jpeg.jpg?v=1787812297"},{"product_id":"apl532740","title":"Humminbird - AS GRP Precision GPS Antenna","description":"\u003ch3\u003eExceptional Accuracy for Confident Navigation\u003c\/h3\u003e\u003cp\u003eThe Humminbird AS GRP Precision GPS Antenna is a high-performance GPS receiver designed to deliver fast and accurate position fixes, ensuring your vessel's precise location at all times. Capable of achieving position accuracy within 2.5 meters, this antenna surpasses standard GPS systems, making it an essential tool for serious navigators and marine enthusiasts who demand reliable and accurate data.\u003c\/p\u003e\u003ch3\u003eEnhanced GPS Performance\u003c\/h3\u003e\u003cp\u003eThe AS GRP antenna enhances your navigational capabilities by providing more accurate and faster position fixes than typical industry-standard GPS systems. This precision ensures you can navigate confidently, whether you're exploring new waters, fishing, or cruising. The antenna's advanced technology is compatible with a wide range of Humminbird systems, making it a versatile addition to any marine electronics setup.\u003c\/p\u003e\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Precision\u003c\/strong\u003e: Achieves position fixes with an accuracy of within 2.5 meters, offering superior reliability compared to standard GPS systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Compatibility\u003c\/strong\u003e: Works seamlessly with all APEX, SOLIX, HELIX, ONIX, and 1100, 900, and 800 Series models, provided the necessary adapters are used where applicable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: The receiver is built to withstand the marine environment, ensuring long-lasting performance and resilience.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Dimensions\u003c\/strong\u003e: 3.25\" diameter, 1.5\" height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length\u003c\/strong\u003e: 20 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: 1\"-14 thread count stem, compatible with optional antenna stems (not included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware Requirement\u003c\/strong\u003e: Compatible systems must have software version 6.300 or higher\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 1-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSeamless Integration and Use\u003c\/h3\u003e\u003cp\u003eThe AS GRP Precision GPS Antenna is easy to integrate into your existing marine electronics setup. With a 20-foot cable, it provides flexibility in installation, allowing you to position the antenna for optimal signal reception. For APEX, SOLIX, and ONIX Series devices, an additional AS GPS NMEA cable is required for connectivity.\u003c\/p\u003e\u003ch3\u003eImportant Considerations\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe AS GRP GPS receiver is not compatible with InterLink systems.\u003c\/li\u003e\n\u003cli\u003eUsers should ensure their Humminbird system software is up to date (version 6.300 or higher) to guarantee compatibility and optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Humminbird","offers":[{"title":"Default Title","offer_id":51551714607350,"sku":"APL532740","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0718192_apl532740.jpg?v=1787812463"},{"product_id":"apl068268","title":"Garmin GPSMAP x3 Series Chartplotter Protective Cover","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin Protective Cover for GPSMAP x3 Series is a fitted cover that sits over the front of your chartplotter display when the boat is not in use, helping limit scratches and sun exposure at the helm.\u003c\/p\u003e\u003cp\u003eIt is offered in four sizes (7\", 9\", 12\", and 16\"). Match the cover to your GPSMAP x3 model family so it fits the bezel correctly and stays put while the boat is docked, trailered, or under a cover.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCovers the display face to help reduce sun exposure and prevent incidental scratches when stored.\u003c\/li\u003e\n\u003cli\u003eFits snugly over the screen area and lifts off quickly when you are ready to use the unit.\u003c\/li\u003e\n\u003cli\u003eSize-specific options for 7\", 9\", 12\", and 16\" GPSMAP x3 displays.\u003c\/li\u003e\n\u003cli\u003eAdds a barrier against fingerprints, dust, and everyday dock grime between trips.\u003c\/li\u003e\n\u003cli\u003eHandy for boats kept in a slip or on a trailer where the helm spends long hours in direct sun.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis cover is offered in multiple sizes to match different GPSMAP x3 chartplotter displays.\u003c\/p\u003e\u003cp\u003eThe part number and size below indicate the compatible GPSMAP models for each cover.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-12989-00 (Size 7\") for GPSMAP 723, 723xsv, 743, and 743xsv. Use this size when your helm unit is from the 7x3 family.\u003c\/li\u003e\n\u003cli\u003e010-12989-01 (Size 9\") for GPSMAP 923, 923xsv, 943, and 943xsv. This version matches the 9x3 display housing.\u003c\/li\u003e\n\u003cli\u003e010-12989-02 (Size 12\") for GPSMAP 1223, 1223xsv, 1243, and 1243xsv. Sized for the 12x3 units so it seats cleanly around the bezel.\u003c\/li\u003e\n\u003cli\u003e010-12989-03 (Size 16\") for GPSMAP 1623, 1623xsv, 1643, and 1643xsv. Built for the larger 16x3 displays at the helm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese covers are specific to the GPSMAP x3 housings. Confirm your chartplotter model number on the unit, then match it to the compatible devices listed in the Variants section.\u003c\/p\u003e\u003cp\u003eBecause the fit is size-matched, a cover meant for a different screen size will not seat correctly, even within the same x3 generation.\u003c\/p\u003e\u003ch6\u003eInstallation and day-to-day use\u003c\/h6\u003e\u003cp\u003ePress the cover over the front of the display until it sits flush around the bezel. Remove the cover before powering up the unit or using touch controls.\u003c\/p\u003e\u003cp\u003eThis is a good match for boaters who leave electronics exposed at the helm between trips, especially in strong sun at the dock or while trailering.\u003c\/p\u003e\u003ch6\u003eCare and cleaning\u003c\/h6\u003e\u003cp\u003eRinse with fresh water if it gets salt on it, then wipe with a soft cloth. Skip abrasive pads and harsh cleaners that can dull the surface over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"9\"","offer_id":51551770378486,"sku":"APL068268-V3","price":29.99,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":51551770411254,"sku":"APL068268-V1","price":29.99,"currency_code":"USD","in_stock":true},{"title":"16\"","offer_id":51551770444022,"sku":"APL068268-V2","price":34.99,"currency_code":"USD","in_stock":true},{"title":"7\"","offer_id":51551770476790,"sku":"APL068268-V4","price":24.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1266553_apl068268_jpeg.jpg?v=1787812602"},{"product_id":"apl419539","title":"Victron Energy Blue Smart IP65 Charger Carry Case, For 12\/25 \u0026 24\/13, 345 x 520 x 130mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy BPC940100200 is a carry case for Victron Blue Smart IP65 chargers in the 12\/25 and 24\/13 sizes, giving the charger and its loose accessories a dedicated place to travel and store on board. It is sized at 345 x 520 x 130 mm, so it fits the larger IP65 charger models while still being manageable to stow in a locker, service kit, or dock cart.\u003c\/p\u003e\u003cp\u003eThis case is useful for boat owners and marine technicians who move charging gear between batteries, tenders, shore-side storage, and workshop benches. The internal layout accommodates the charger, input and output cables, plus battery-clamp and eyelet cable options, which helps prevent cable tangles and misplaced connection leads.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits Victron Blue Smart IP65 Charger 12\/25 and 24\/13 models.\u003c\/li\u003e\n\u003cli\u003e345 x 520 x 130 mm case size for the larger BPC charger format.\u003c\/li\u003e\n\u003cli\u003eCompartments hold the charger, input and output cables, and battery-clamp or eyelet cable options.\u003c\/li\u003e\n\u003cli\u003eSnap-shut closure helps keep the contents contained during transport around the boat, dock, or workshop.\u003c\/li\u003e\n\u003cli\u003eProtects charging gear from everyday knocks, loose-tool contact, and clutter when stored in a locker or service bag.\u003c\/li\u003e\n\u003cli\u003eSupplied as the carry case only, with charger and accessories not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis carry case makes sense when a Blue Smart IP65 charger is not permanently mounted and needs to move between battery banks, boats, or maintenance locations. It keeps the charger and leads together, which is helpful during seasonal layup, marina service calls, trailer-boat charging, or keeping a spare charging setup organized for quick use.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe case is matched to the Victron Blue Smart IP65 12\/25 and 24\/13 charger sizes. For smaller Blue Smart IP65 charger models, the smaller Victron case size may be the better fit, so the charger rating should be checked before ordering.\u003c\/p\u003e\u003ch6\u003eStorage and care\u003c\/h6\u003e\u003cp\u003eStore the charger and cables dry before closing the case, especially after dockside or cockpit use. Keeping clamps, eyelets, and AC\/DC leads in their dedicated spaces reduces stress on cables and makes it easier to inspect the charging kit before the next use.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":51552130072822,"sku":"APL419539","price":55.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324337_apl419539.webp?v=1787813649"},{"product_id":"apl646459","title":"Garmin gWind Race\/nWind Connector Adapter Cable Bundle, For Nexus Network, Includes gWind Race Transducer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01403-10 is a gWind Race and nWind connector adapter cable bundle for sailboats that already run a Nexus wind network. It lets you replace an older nWind masthead transducer with a gWind Race transducer while keeping your existing Nexus mast cable, so you can update the sensor without pulling a new cable through the spar.\u003c\/p\u003e\u003cp\u003eThe adapter cable bridges the connector change between nWind and gWind. The gWind Race sensor uses a three-bladed propeller and a twin-fin vane to read wind speed and angle, which helps when you are trying to hold steady numbers in lighter air.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Nexus owners replacing an nWind transducer with a gWind series sensor, using the existing Nexus mast cable.\u003c\/li\u003e\n\u003cli\u003eIncludes an nWind-to-gWind connector adapter cable to mate the new transducer to the legacy mast wiring.\u003c\/li\u003e\n\u003cli\u003egWind Race wind sensor uses a three-bladed propeller and a twin-fin vane for wind speed and angle readings.\u003c\/li\u003e\n\u003cli\u003eSupports a clean retrofit when you want to refresh a masthead sensor without re-running mast wiring.\u003c\/li\u003e\n\u003cli\u003ePropeller installation instructions are included for correct assembly after transport or service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003egWind Race transducer\u003c\/li\u003e\n\u003cli\u003eConnector adapter cable\u003c\/li\u003e\n\u003cli\u003ePropeller installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bundle is intended for boats with an existing Nexus network that previously used an nWind wind transducer. It is a straightforward swap when your mast is already wired with the Nexus mast cable and you want to keep that cable in place.\u003c\/p\u003e\u003cp\u003eIf your boat does not have the Nexus mast cable or you are building a system from scratch, plan the network layout first so the connector style at the masthead matches the rest of your wind instrumentation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMost installs follow a simple path: remove the old nWind transducer, mount the gWind Race transducer in the same location, then connect the adapter cable between the transducer lead and the existing mast cable. Secure the connection so it is not carrying strain from mast movement, and protect the joint from spray and washdowns.\u003c\/p\u003e\u003cp\u003eAfter mounting, confirm vane alignment and check your instrument calibration on the water. Small alignment errors at the masthead show up quickly as persistent wind-angle offsets.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for performance cruisers and race crews who want to keep a proven Nexus instrument setup but replace a worn nWind sensor with the gWind Race style. It also helps when you are chasing intermittent wind readings caused by aging masthead connectors, since the adapter cable refreshes that interface.\u003c\/p\u003e\u003ch6\u003eSafety information\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51552236765430,"sku":"APL646459","price":1199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694300_apl646459_jpeg.jpg?v=1787814235"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/f0120afc-01db-444b-9fe2-c2b846035e31.webp?v=1790829136","url":"https:\/\/www.apollolighting.com\/collections\/cat-handheld-gps-accessories.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}