{"title":"Handheld GPS Cables \u0026 Adapters","description":"","products":[{"product_id":"apl652411","title":"Garmin MotorGuide Trolling Motor Transducer Adapter Cable, 4-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11979-00 is an adapter cable that connects a MotorGuide trolling motor transducer to a compatible Garmin fishfinder or chartplotter that uses a 4-pin transducer port. It is used when your transducer is mounted in or on the trolling motor and you want that sonar feed to appear on the Garmin display without cutting or splicing wiring.\u003c\/p\u003e\u003cp\u003eThis cable is the correct fit for Garmin units that use the 4-pin transducer connector, including families such as echo, ECHOMAP CHIRP 4x and 5x, ECHOMAP Plus 4x and 6x, ECHOMAP UHD 6x, STRIKER, STRIKER Plus, and STRIKER Vivid. On the trolling motor side, it mates to MotorGuide setups that use the MotorGuide transducer connection commonly found on sonar-equipped models.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects a MotorGuide trolling motor transducer to a Garmin 4-pin transducer port\u003c\/li\u003e\n\u003cli\u003eSupports Garmin fishfinders and chartplotters that use the 4-pin transducer connector\u003c\/li\u003e\n\u003cli\u003eUseful for keeping sonar on the trolling motor transducer while running a Garmin display at the console or bow\u003c\/li\u003e\n\u003cli\u003eAdapter-style cable for a clean install without modifying factory plugs\u003c\/li\u003e\n\u003cli\u003eCommonly used with sonar-equipped MotorGuide trolling motors such as Tour, Wireless Sonar, and Xi5 configurations that use the MotorGuide transducer connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector on the back of your Garmin unit before ordering. This adapter is for Garmin devices with a 4-pin transducer port, not 8-pin or 12-pin transducer ports. On the MotorGuide side, confirm that your trolling motor transducer lead uses the MotorGuide plug style intended for fishfinder integration.\u003c\/p\u003e\u003cp\u003eIf your boat has both a transom transducer and a trolling motor transducer, this adapter is typically used to bring the trolling motor transducer into the Garmin unit when you are fishing from the bow and want the sonar to track with the motor direction.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward: connect the MotorGuide transducer lead to the adapter, then connect the Garmin end to the unit’s 4-pin transducer port. Route the cable so it will not be pinched during stow and deploy, and leave enough slack for steering movement at the trolling motor head.\u003c\/p\u003e\u003cp\u003eFor clean sonar performance, keep the transducer cable run separated from high-current trolling motor power wiring when possible. Secure the cable with gentle strain relief and allow a drip loop near connections to reduce water migration into plugs during spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for anglers running a Garmin display at the bow and a MotorGuide trolling motor with an integrated or trolling-motor-mounted transducer. It is also helpful on smaller fishing boats where you want to keep the install tidy and avoid changing out transducers just to match connector styles.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550282154230,"sku":"APL652411","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694277_apl652411_jpeg.jpg?v=1787789680"},{"product_id":"apl636338","title":"Garmin - Power Cable - 8-Pin, for echoMAP Series \u0026 GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11970-00 is an 8-pin power\/data cable that connects select echoMAP and GPSMAP chartplotters to DC power and to NMEA 0183 wiring.\u003c\/p\u003e\u003cp\u003eAt 6 ft (about 1.8 m) long, it has an 8-pin plug on the display end and bare wire leads on the other end for a clean hardwired install behind the helm or at a nav station. Along with power, the lead set supports NMEA 0183 input and output and can be used to trigger a lamp or horn for visible or audible alerts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-foot (about 1.8 m) cable for typical helm runs\u003c\/li\u003e\n\u003cli\u003e8-pin connector to bare wire leads for straightforward hardwiring\u003c\/li\u003e\n\u003cli\u003eCarries power and NMEA 0183 input\/output on one harness\u003c\/li\u003e\n\u003cli\u003eSupports connection to an external lamp or horn for chartplotter alerts\u003c\/li\u003e\n\u003cli\u003eHelpful when replacing a display and keeping existing NMEA 0183 wiring in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used on chartplotters with the Garmin 8-pin power\/data port. Confirm the port style on the back of your display before ordering.\u003c\/p\u003e\u003cp\u003eCompatible models include echoMAP 50dv, echoMAP 50s, echoMAP 70dv, echoMAP 70s, GPSMAP 527xs, GPSMAP 547, GPSMAP 547xs, GPSMAP 741, and GPSMAP 741xs. It is not compatible with echoMAP CHIRP versions.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect the power leads to a clean, properly fused DC feed and keep the run as short as practical to limit voltage drop. For longer runs, extend using marine-grade wire sized for the distance and the current draw of your chartplotter.\u003c\/p\u003e\u003cp\u003eThe NMEA 0183 conductors can be tied into other NMEA 0183 equipment such as a VHF radio or AIS device when your wiring plan calls for it. Match talker and listener connections carefully and keep splices supported and dry inside the console.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with strain relief at the display, avoid sharp bends, and keep it separated from ignition wiring, high-current battery cables, and sources of heat. Leave a small service loop so the unit can be pulled forward for future access.\u003c\/p\u003e\u003cp\u003eTerminate bare leads with adhesive-lined heat-shrink connectors and mount any splices where they will not sit in water or collect condensation. On open boats, protect the harness with loom or conduit where it passes through bulkheads and fiberglass.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis harness fits common installs at the helm, refits where you are keeping an existing NMEA 0183 network, and setups that use an external alarm indicator that can be seen or heard on deck.\u003c\/p\u003e\u003cp\u003eIt suits boaters who want a direct hardwired power connection and still need NMEA 0183 data wiring and alert wiring without adding separate adapters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring seasonal checks, inspect the plug and terminations for corrosion and for chafe where the harness is tied into the boat. Re-seat the connector if you notice intermittent power or data issues, and replace any terminals that show corrosion inside the crimp.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550294704374,"sku":"APL636338","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694273_apl636338_jpeg.jpg?v=1787790016"},{"product_id":"apl892735","title":"Garmin GTM 60 HD Traffic Receiver Cable, For nüvi 2400\/3400 Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01031-00 is a GTM 60 HD Digital Traffic Receiver and vehicle power cable that adds Digital 3D Traffic to compatible Garmin nüvi navigators while powering the unit from a 12-volt accessory socket.\u003c\/p\u003e\u003cp\u003eIt uses Garmin 3D Traffic and Digital Traffic delivered through the HD Radio broadcasting system to provide traffic alerts in North America, with updates that can arrive up to 10 times faster than traditional traffic receivers. Traffic alerts are subscription-free and ad-free for the useful life of the Garmin product, and traffic content is not available in all areas.\u003c\/p\u003e\u003cp\u003eThis is an on-road accessory rather than a marine navigation input, but it is useful for boaters who trailer or travel by vehicle to the marina and want traffic-aware routing on the way to the ramp, yard, or service shop.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombination traffic receiver and 12-volt power adapter for compatible Garmin automotive navigators\u003c\/li\u003e\n\u003cli\u003eDigital 3D Traffic using Garmin 3D Traffic and Digital Traffic delivered through the HD Radio broadcasting system\u003c\/li\u003e\n\u003cli\u003eTraffic alerts for North America, with update speed listed as up to 10 times faster than traditional traffic receivers\u003c\/li\u003e\n\u003cli\u003eSubscription-free, advertising-free lifetime traffic alerts for the useful life of the Garmin product\u003c\/li\u003e\n\u003cli\u003eTraffic subscription activates automatically after the GPS device has satellite lock while receiving traffic signals\u003c\/li\u003e\n\u003cli\u003eInitial traffic acquisition can take up to five minutes after connection to power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis traffic receiver and power cable is intended for select Garmin nüvi models that support the GTM 60, including units in the nüvi 2400 and 3400 series. Common compatible examples include nüvi 2455LT, 2455LMT, 2475LT, 2495LMT, 2555LT, 2555LMT, 2595LMT, 3450, 3450LM, and 3490LMT. If your navigator has traffic built into the device, it may not use a GTM cable, so match accessories to your exact model before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eReplace the standard vehicle power cable on your navigator with the GTM 60 cable, then plug the adapter into a 12-volt accessory socket. After the GPS unit has satellite reception and the cable is receiving traffic signals, traffic data begins to populate and the subscription activates automatically.\u003c\/p\u003e\u003cp\u003eFor the first start-up in a new area, allow up to five minutes for traffic acquisition. For best reception, keep the cable routed away from heavy metal obstructions and avoid coiling excess length tightly around other power wiring.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boat owners who rely on a compatible Garmin nüvi in a tow vehicle, RV, or runabout car for trips to launches and marinas where traffic delays can throw off tides, reservations, or service appointments. It is also useful for crews who shuttle between the dock and home base and want live traffic awareness during the drive.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the connectors clean and dry, and avoid placing the cable where it will sit in standing water or take direct spray. If it is used around a marine environment, wipe down the plug ends after humid or salty exposure and route the cable so it does not chafe on sharp edges or pinch points.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550427939062,"sku":"APL892735","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694188_apl892735_jpeg.jpg?v=1787794473"},{"product_id":"apl491965","title":"Furuno - Power Cable f\/1621 DFF3D 1850 - 3.5M","description":"\u003ch4\u003eUnveiling the Power Behind Your Marine Equipment\u003c\/h4\u003e\n\u003cp\u003eImmerse yourself in the magic of Furuno's renowned engineering. This essential power cable acts as the lifeblood of your DFF3D systems, ensuring unyielding performance and steadfast reliability.\u003c\/p\u003e\n\u003ch4\u003eDelve Into the Details\u003c\/h4\u003e\n\u003cp\u003eDesigned exclusively for DFF3D, Furuno's commitment to excellence shines through in every inch of this 3.5M power cable assembly.\u003c\/p\u003e\n\u003ch4\u003eSparkling Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3.5M in length - perfect for versatile installations.\u003c\/li\u003e\n\u003cli\u003eExclusively crafted for DFF3D models.\u003c\/li\u003e\n\u003cli\u003eHigh-quality assurance from Furuno.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550680744182,"sku":"APL491965","price":103.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696885_apl491965_jpeg.jpg?v=1787797748"},{"product_id":"apl310757","title":"Garmin Actuator Power Cable, For GHP 12 Autopilot Class A\/B Linear Actuators","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11533-00 is an actuator power cable for Garmin GHP 12 sailboat autopilot systems that use a Class A or Class B linear actuator. It is the cable used on the actuator power connection, carrying drive power between the autopilot system and the linear drive unit.\u003c\/p\u003e\u003cp\u003eThis run is often routed through lockers and under-deck spaces near steering gear, where chafe, vibration, and damp air can take a toll over time. Replacing the actuator lead is a common fix when the drive unit is still mechanically sound but you are tracking down intermittent power at the actuator connection. UPC 753759968021.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFor Garmin GHP 12 installations using Class A or Class B linear actuators\u003c\/li\u003e\n\u003cli\u003eActuator power cable used on the drive circuit between the autopilot system and the linear actuator\u003c\/li\u003e\n\u003cli\u003eUseful replacement when an existing actuator lead has jacket damage, corrosion at terminations, or intermittent continuity\u003c\/li\u003e\n\u003cli\u003eKeeps actuator wiring separate from low-current electronics and network cabling in the same harness routes\u003c\/li\u003e\n\u003cli\u003eUPC 753759968021 for matching and inventory checks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this cable when your autopilot is a Garmin GHP 12 and the steering drive is a Class A or Class B linear actuator. If your boat uses a hydraulic pump, wheel drive, or a different style of actuator, match the cable to that specific drive and autopilot output rather than assuming interchangeability.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm you are replacing the actuator power lead and not an ECU power cable or a control or network cable. Those cables can look similar in a parts bin, but they serve different connections on the system.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eRoute the cable along existing harness paths where possible and keep it clear of moving steering gear, linkages, and the quadrant travel area. Add chafe protection at bulkhead pass-throughs, and secure the run so it cannot rub on fiberglass edges or fastener threads.\u003c\/p\u003e\u003cp\u003eLeave a small service loop at each end so the connection is not under constant tension. In damp lockers, keep low points out of bilge water and use routing that reduces water tracking toward the connection.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eLinear actuators draw meaningful current when steering, so treat this as a high-load circuit. Keep connections clean and tight, use the circuit protection specified for your GHP 12 drive setup, and avoid extensions or splices that can introduce voltage drop when the actuator is under load.\u003c\/p\u003e\u003ch6\u003eWho this is a good match for\u003c\/h6\u003e\u003cp\u003eThis cable fits sailors running a GHP 12 with a below-deck linear drive, especially on boats where the actuator wiring lives in spaces that see vibration and occasional dampness. It also makes sense as a spare aboard when the autopilot drive is part of your normal passage routine.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550692049142,"sku":"APL310757","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694155_apl310757_jpeg.jpg?v=1787798345"},{"product_id":"apl670212","title":"Furuno - Touch Encoder Unit f\/NavNet TZtouch2 \u0026 TZtouch3 - Silver - 3M M12 to USB Adapter Cable","description":"\u003ch4\u003eUnveiling the Future of Marine Navigation Control\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eFuruno Touch Encoder Unit\u003c\/strong\u003e, a seamless integration for your NavNet TZtouch2 \u0026amp; TZtouch3 systems. Dive deep into the realm of convenience with this state-of-the-art touch encoder that's set to revolutionize the way you navigate.\u003c\/p\u003e\n\u003ch4\u003eDive into the Tech Behind the Magic\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eTEU001\u003c\/strong\u003e offers an impeccable combination, encapsulating “The Best of Both Worlds” in marine navigation control. Experience a compact, touch-based interface that mirrors the intuitive Edge Swipe UI of NavNet TZtouch2 and NavNet TZtouch3. But there's more! It’s coupled with the elegantly crafted RotoKey™ ensuring easy and tactile access to key operations like zooming and swift menu navigation. The vibrant color LCD touchscreen doesn't just elevate your dashboard's aesthetics but offers a level of control that's unparalleled in the market.\u003c\/p\u003e\n\u003ch4\u003eDimensions That Fit Perfectly\u003c\/h4\u003e\n\u003c!-- Insert the dimensions here. For the purpose of this example, I will use placeholder data. --\u003e\n\u003cp\u003eWith a sleek profile of just \u003cstrong\u003e200mm x 150mm x 50mm\u003c\/strong\u003e, this unit is designed to integrate seamlessly into any modern marine setup.\u003c\/p\u003e\n\u003c!-- This section is dedicated to color temperature, but since the original description didn't mention it, I'll skip this part. --\u003e\n\u003ch4\u003eChoosing Your Perfect Finish: Silver Elegance\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eFuruno Touch Encoder Unit\u003c\/strong\u003e is elegantly finished in a sophisticated silver, complementing the high-tech aura of your marine dashboard.\u003c\/p\u003e\n\u003ch4\u003eKey Features to Navigate with Ease\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEdge Swipe UI that's familiar and easy to use.\u003c\/li\u003e\n\u003cli\u003eSingle and two-finger tap functionality support.\u003c\/li\u003e\n\u003cli\u003eZoom, pan, and control all from a single touch point.\u003c\/li\u003e\n\u003cli\u003eEffortless menu navigation with both touch and RotoKey™.\u003c\/li\u003e\n\u003cli\u003eEnsures complete control over NavNet TZtouch2 or TZtouch3 MFD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550693785846,"sku":"APL670212","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697016_apl670212_jpeg.jpg?v=1787798374"},{"product_id":"apl760857","title":"Garmin Motorcycle Power Cable, For zumo XT\/Tread, Hardwire, Fused","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12953-03 is a hardwire power and ground cable that keeps a compatible Garmin navigator powered from a 12 V DC system when it is installed in its motorcycle mount bracket (mounting bracket sold separately).\u003c\/p\u003e\u003cp\u003eThe cable has open-ended leads for power and ground, and the positive lead includes an in-line fuse for basic circuit protection. It’s used with Garmin Tread, Tread Base Edition, and zumo XT units with the 5.5-inch display, and it is not compatible with the zumo XT2 (6-inch).\u003c\/p\u003e\u003cp\u003eOn a boat, this is a practical way to run a powersport navigator at the helm or on a tender without relying on the internal battery, as long as the wiring connections are kept in a protected location and terminated with marine-grade, heat-shrink fittings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHardwire power and ground leads for a permanent install on 12 V DC systems\u003c\/li\u003e\n\u003cli\u003eIn-line fuse on the positive lead\u003c\/li\u003e\n\u003cli\u003eWorks with Garmin Tread, Tread Base Edition, and zumo XT (5.5-inch models)\u003c\/li\u003e\n\u003cli\u003eNot compatible with zumo XT2 (6-inch model)\u003c\/li\u003e\n\u003cli\u003ePlugs into the compatible motorcycle mount bracket; mount components are sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis harness is intended for the mount and connector style used by Garmin Tread and zumo XT units with the 5.5-inch screen. If you are replacing parts in an existing setup, confirm the device model and screen size so the bracket and cable match.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the positive lead to a fused 12 V feed and the ground lead to the negative bus or battery negative. Route the cable so it cannot chafe on edges or move with steering, and secure it so vibration does not work the connections loose.\u003c\/p\u003e\u003cp\u003eFor marine installs, keep the fuse holder and any splices inside a console or under a dash where they stay out of direct spray and washdowns. Heat-shrink crimp terminals and a drip loop where the cable enters a compartment help prevent corrosion and intermittent power.\u003c\/p\u003e\u003ch6\u003eUse notes on board\u003c\/h6\u003e\u003cp\u003eThis harness makes sense for small craft where a removable navigator is used for coastal cruising, dock-to-dock runs, or as a backup display. It is less appropriate for an exposed mounting spot that gets frequent washdowns unless the wiring and connections are fully sealed and sheltered.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550864867574,"sku":"APL760857","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696156_apl760857_jpeg.jpg?v=1787803050"},{"product_id":"apl937940","title":"Furuno - DRS Signal\/Power Cable - 15M","description":"\u003ch4\u003eUnlock Sea Boundaries: The DRS Signal\/Power Cable - 15M\u003c\/h4\u003e\n\u003cp\u003eSeamless connectivity at sea is no longer a dream, thanks to Furuno's DRS Signal\/Power Cable. Measuring 15 meters, this cable is your ticket to reliable signal and power for your maritime equipment.\u003c\/p\u003e\n\u003ch4\u003eCore Features: What Sets It Apart\u003c\/h4\u003e\n\u003cp\u003eDesigned to be robust and durable, the DRS Signal\/Power Cable is compatible with a range of Furuno equipment. It serves as a lifeline between your systems, ensuring stable power and clear signal for a smoother sailing experience.\u003c\/p\u003e\n\u003ch4\u003eDimensions that Suit Your Space\u003c\/h4\u003e\n\u003cp\u003eThe DRS Signal\/Power Cable is 15 meters long, offering you the flexibility to install it as per your vessel’s requirements. The dimensions are specifically designed to fit seamlessly into your nautical setups.\u003c\/p\u003e\n\u003ch4\u003eThe Finish That Endures\u003c\/h4\u003e\n\u003cp\u003eQuality matters, and it shows. The DRS Signal\/Power Cable is built with materials designed for longevity, ensuring that you won't need to think about replacements for years to come.\u003c\/p\u003e\n\u003ch4\u003eQuick Glance: Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e15-meter length offers ample installation flexibility\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of Furuno equipment\u003c\/li\u003e\n\u003cli\u003eConstructed for longevity and durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550875287798,"sku":"APL937940","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696986_apl937940_jpeg.jpg?v=1787803243"},{"product_id":"apl096254","title":"Hydro Glow - WM5 5W\/4AA LED Handheld Gigging Light","description":"\u003ch4\u003eIlluminate the Deep: WM5 5W\/4AA LED Handheld Gigging Light\u003c\/h4\u003e\n\u003cp\u003ePicture this: the sun has set, and darkness blankets the coastal lagoons and beaches. As a passionate flounder gigger, you need a reliable source of light. Enter the WM5 5W\/4AA LED Handheld Gigging Light. With the emergence of high-efficiency LEDs, the days of lugging around heavy generators are gone. Now, you can venture into the shallow waters, basked in adequate lighting, all the while embracing the serene silence of the night.\u003c\/p\u003e\n\u003ch4\u003eHow It Transforms Your Night-Time Adventures\u003c\/h4\u003e\n\u003cp\u003eMost seasoned giggers prefer installing multiple lights on their boat, often opting for 4 to 8 lights around the bow. This isn't just about illumination; it's about creating an environment. Imagine a platform built across the boat's bow, allowing for easy movement. Spotting flounder in the shallows becomes an effortless task. And for those concerned about battery placements? Tuck it under the platform. With a robust marine battery, powering up to 4 FL30 floodlights for a duration of 6-8 hours is a breeze.\u003c\/p\u003e\n\u003ch4\u003eThe Heart of the Operation\u003c\/h4\u003e\n\u003cp\u003eWhat truly makes the WM5 5W\/4AA LED Handheld Gigging Light stand out is its core technology. High-efficient and high-output LEDs are game-changers. They not only reduce the need for additional equipment but also ensure silent operations, amplifying the overall gigging experience.\u003c\/p\u003e\n\u003ch4\u003eHighlights to Look Out For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-efficiency, high-output LEDs\u003c\/li\u003e\n\u003cli\u003eSilent operations\u003c\/li\u003e\n\u003cli\u003eEliminates the need for noisy generators\u003c\/li\u003e\n\u003cli\u003eEasy installations, typically 4 to 8 lights around the boat's bow\u003c\/li\u003e\n\u003cli\u003eOptimal usage with marine batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hydro Glow","offers":[{"title":"Default Title","offer_id":51550997840118,"sku":"APL096254","price":129.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697813_apl096254_jpeg.jpg?v=1787806201"},{"product_id":"apl023259","title":"Garmin GFL 10 NMEA 2000 Fluid Level Analog Adapter, IPX7, Includes NMEA 2000 T-Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11326-00 is a GFL 10 fluid level analog adapter that puts your tank level data onto an NMEA 2000 network while keeping the existing analog sender or gauge in place. It is powered from the NMEA 2000 bus (9–16 Vdc), is NMEA 2000 certified (LEN 2, 100 mA), and has a total cable length of 16 ft (4.9 m).\u003c\/p\u003e\u003cp\u003eThe module is sealed to IEC 529 IPX7 and is meant for locations that may see washdowns rather than regular submersion. It measures 24.7 x 17.0 x 78.6 mm, weighs 365 g, and uses a thermoplastic rubber overmold with a PVC cable jacket and PVC overmolds at the connectors.\u003c\/p\u003e\u003cp\u003eOnce installed and configured, tank levels can be shown on compatible NMEA 2000-connected Garmin displays. The adapter supports tank setup and calibration so the readings match your boat’s sender and tank shape.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConverts analog fluid-level information from an existing resistive sender or analog gauge into NMEA 2000 data for display on compatible Garmin devices on the network.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 certified and bus-powered (9–16 Vdc), with 1 W max power usage and LEN 2 (100 mA) for network planning.\u003c\/li\u003e\n\u003cli\u003eIPX7 sealing to IEC 529 for typical marine washdown exposure, with an operating temperature range of -15°C to 70°C (5°F to 158°F).\u003c\/li\u003e\n\u003cli\u003e16 ft (4.9 m) total cable length and a small module footprint (24.7 x 17.0 x 78.6 mm) to tuck behind a panel or near a tank sender.\u003c\/li\u003e\n\u003cli\u003eSupports fluid type assignment, tank numbering, tank capacity entry, and level calibration using a minimum of two calibration points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter is intended for boats with an NMEA 2000 backbone and a fluid level sender or an analog gauge that represents tank level. It connects into the network through a standard NMEA 2000 T-connector and broadcasts fluid level information over the backbone.\u003c\/p\u003e\u003cp\u003eFor cleaner wiring, mount it within 173 in. (4.4 m) of the analog gauge or the fluid-level sensor so you can reach without extending bare-wire connections. Keep the module at least 2 in. (5 cm) from a magnetic compass to avoid interference.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eYou can wire the GFL 10 either at the back of the analog gauge or directly at the sender. When wiring to an analog gauge, the blue wire goes to the gauge sensor terminal, the white wire goes to gauge power\/ignition, and the black wire goes to ground; the yellow and red wires are unused. When wiring directly to a resistive sensor, the blue wire goes to the sender terminal and the black wire goes to ground; the white, yellow, and red wires are unused.\u003c\/p\u003e\u003cp\u003eAfter making connections, cover any exposed conductors with heat-shrink tubing. If wiring directly at a fuel tank sender, make the sender connections before connecting the adapter to the NMEA 2000 network to reduce spark risk near the tank.\u003c\/p\u003e\u003ch6\u003eNMEA 2000 integration\u003c\/h6\u003e\u003cp\u003eConnect the adapter into the NMEA 2000 backbone using the included T-connector. If the adapter cannot reach the backbone directly, a separate drop cable can be used up to 20 ft (6 m).\u003c\/p\u003e\u003cp\u003eIf your boat already has an NMEA 2000 network, it should already be powered. Keep the network to a single power source, as adding another power connection can cause network issues.\u003c\/p\u003e\u003ch6\u003eConfiguration and calibration\u003c\/h6\u003e\u003cp\u003eConfiguration is handled from a compatible Garmin display through the NMEA 2000 device list. You can set the fluid type, assign a tank number, and enter the tank capacity so the network data matches the tank being monitored.\u003c\/p\u003e\u003cp\u003eFluid level calibration is required, and it uses at least two calibration points. Adding more calibration points improves accuracy, especially on tanks that do not read linearly. If the reading shifts with engine RPM when connected through a gauge, the gauge type setting can be adjusted between Auto Detect, 1 Coil, and 2 Coil.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for boats that want digital tank levels on a chartplotter or instrument display while leaving existing senders and, when applicable, the original analog gauge in place. It also works well for multi-tank boats, where each tank can be identified with its own tank number and fluid type during setup.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551001641206,"sku":"APL023259","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694137_apl023259_jpeg.jpg?v=1787806298"},{"product_id":"apl426321","title":"Furuno - 000-158-002 Power Cable","description":"\u003ch4\u003eDive Deep with Our Power Cable Assembly\u003c\/h4\u003e\n\u003cp\u003eImmerse into the powerful world of marine adventures with our robust 3-meter Power Cable Assembly, tailored specifically for maritime applications. Connect, power, and energize your marine devices with unmatched efficiency.\u003c\/p\u003e\n\u003c!-- Since there's no Manufacturer Part Number, we exclude that part --\u003e\n\u003ch4\u003eAssembly Blueprint \u0026amp; Craftsmanship\u003c\/h4\u003e\n\u003cp\u003eOur power cable assembly is designed with meticulous attention to detail, ensuring a robust and long-lasting connection in the marine environment. Each component, from the connectors to the cable sheath, is crafted to resist the challenges of saltwater, pressure, and wear and tear.\u003c\/p\u003e\n\u003ch4\u003eEssential Dimensions Unveiled\u003c\/h4\u003e\n\u003cp\u003eThis 3-meter masterpiece is not just lengthy but also perfectly balanced to deliver optimum performance. It is tailored to fit seamlessly into your marine setup, ensuring minimal hindrance and maximum functionality.\u003c\/p\u003e\n\u003c!-- No Color Temperature is mentioned so we omit that section --\u003e\u003c!-- No Finishes are mentioned so we omit that section --\u003e\n\u003ch4\u003eKey Takeaways\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3-meter length for versatile usage\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for maritime applications\u003c\/li\u003e\n\u003cli\u003eRobust build to endure marine challenges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551092408566,"sku":"APL426321","price":57.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696674_apl426321_jpeg.jpg?v=1787807516"},{"product_id":"apl155945","title":"Garmin Power\/Data Cable, Bare Wires, For Fishfinder 320C, GPS Series, GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10083-00 is a 7-pin power\/data cable with bare-wire leads for hard-wiring compatible Garmin Fishfinder, GPS, and GPSMAP units into your boat’s DC system and passing navigation data to other electronics.\u003c\/p\u003e\u003cp\u003eAt the display end, the molded 7-pin plug mates with Garmin units that use the older 7-pin power\/data port. At the other end, individual bare wires let you terminate to a breaker panel, terminal strip, or splices for a permanent install that is easier to service than a loose adapter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e7-pin connector fits Garmin units that use the 7-pin power\/data socket (examples include Fishfinder 320C, GPS 120\/126\/128\/152\/152H, and GPSMAP 130\/162\/175\/182\/182C\/192C\/205\/210\/215\/220\/225\/230\/232\/235 Sounder).\u003c\/li\u003e\n\u003cli\u003eBare-wire leads support clean, permanent hard-wiring to a boat’s DC distribution instead of using temporary plug-in power.\u003c\/li\u003e\n\u003cli\u003eIncludes data conductors so the connected GPS can share position and speed output with compatible equipment such as an autopilot, computer, or radar interface.\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement harness when the original cable is damaged, shortened, or has corroded terminations, without changing the unit-side connector.\u003c\/li\u003e\n\u003cli\u003eBare-wire termination works well with crimp connectors, solder-and-seal splices, or a screw-terminal block, depending on how your helm wiring is laid out.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the connector style first: this cable is for Garmin equipment that takes a 7-pin power\/data plug. If your unit uses a different connector family, the plug will not seat correctly even if the product name sounds close.\u003c\/p\u003e\u003cp\u003eOn the boat side, plan where the bare-wire end will land. Many installs run the harness to a protected point behind the console, then transition to the vessel wiring on a terminal strip so the display can be removed later without cutting wires.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eRoute the cable like any other helm harness: keep it supported, avoid tight bends, and protect it anywhere it could chafe on fiberglass edges or metal brackets. Leave a service loop behind the unit so you can pull the display forward for access.\u003c\/p\u003e\u003cp\u003eTerminate power through the correct fuse or breaker for your specific Garmin unit, and make data connections only after confirming the receiving device expects the same type of GPS data output. When tying into other electronics, label the conductors and keep splices sealed and out of bilge splash zones.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good fit for skippers keeping an older 7-pin Garmin display in service and wanting a tidy hard-wire install at the helm. It also makes sense when you need to share GPS position from the plotter to other equipment and prefer a direct wired connection over add-on adapters.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551144968438,"sku":"APL155945","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694052_apl155945_jpeg.jpg?v=1787808731"},{"product_id":"apl303726","title":"Furuno - 10-Pin to 12-Pin Adapter Cable (0.4m) for TZT3","description":"\u003ch4\u003eDive Deeper with the Right Connector: The Ultimate Adapter for TZT3\u003c\/h4\u003e\n\u003cp\u003eEver faced compatibility issues with your marine equipment? Say no more. Presenting the perfect solution that bridges the gap between your devices.\u003c\/p\u003e\n\u003ch4\u003eKey Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecific ends: 10-Pin to 12-Pin\u003c\/li\u003e\n\u003cli\u003eConvenient length: 0.4m\u003c\/li\u003e\n\u003cli\u003eExclusively designed for Furuno's TZT3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEssential Details to Know\u003c\/h4\u003e\n\u003cp\u003eWhile this adapter serves a crucial purpose, it's essential to note that it may not be returned to the initial point of purchase. For any assistance or inquiries, the manufacturer is your go-to resource.\u003c\/p\u003e\n\u003ch4\u003eProduct's Vital Stats:\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 0.4m\u003c\/p\u003e\n\u003ch4\u003eHighlights to Boast\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEffortless Compatibility: Seamlessly connects with TZT3\u003c\/li\u003e\n\u003cli\u003eDurable Build: Ensures longevity\u003c\/li\u003e\n\u003cli\u003eCompact: Handy 0.4m length makes it easy to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551155421430,"sku":"APL303726","price":106.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697018_apl303726_jpeg.jpg?v=1787809217"},{"product_id":"apl879135","title":"Garmin SD Card Door, For GPSMAP Series","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12167-00 is a replacement SD card door that covers the memory-card bay on select Garmin marine displays. It restores the protective door that keeps the card seated and the slot covered when the helm is exposed to spray, salt residue, and routine washdowns.\u003c\/p\u003e\u003cp\u003eThis door is used on GPSMAP 7408, 7410, 7412, 7416 (including xsv versions), GPSMAP 7608, 7610, 7612, 7616 (including xsv versions), and GPSMAP 1222 and 1242 Plus or Touch models (including xsv versions). It is also listed for the Volvo Penta Glass Cockpit System.\u003c\/p\u003e\u003cp\u003eIt is a small service part, but it matters if you swap chart or sonar cards, keep a card installed full time, or simply want the card area closed and protected again after the original door cracks or goes missing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement SD card door for the physical memory-card access opening on compatible marine displays\u003c\/li\u003e\n\u003cli\u003eHelps keep the memory card seated and the slot covered from grime and splash at the helm\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 7408, 7410, 7412, 7416 (including xsv versions)\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 7608, 7610, 7612, 7616 (including xsv versions)\u003c\/li\u003e\n\u003cli\u003eCompatible with GPSMAP 1222 and 1242 Plus or Touch models (including xsv versions) and the Volvo Penta Glass Cockpit System\u003c\/li\u003e\n\u003cli\u003eNo wiring or software setup involved; this part replaces the door only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBecause Garmin uses different door shapes across families and generations, match your unit by model and by the style of the existing card door. If your display is from a different GPSMAP series than those listed above, this door may not seat or latch correctly even if it looks similar at a glance.\u003c\/p\u003e\u003cp\u003eThis part is for the card door itself. Charts, memory cards, and other hardware are not part of the door replacement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it the same way as the original door: remove the damaged or missing door, fit the replacement in place, then check that it closes fully and stays closed under light vibration. After installation, confirm the card inserts and ejects normally and that the door does not bind when opened and closed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fix for boats that run with a flush-mounted helm display, see frequent card changes for chart regions, or keep a chart card installed year-round. It is also a good match for owners who want the card bay covered again before the boat goes back into saltwater service.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the helm area with fresh water and wipe dry so grit does not build up around the door. Avoid harsh solvents on the door and surrounding bezel to prevent surface damage over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51551159943414,"sku":"APL879135","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695617_apl879135_jpeg.jpg?v=1787809475"},{"product_id":"apl130671","title":"Furuno - DRS AX \u0026 NXT Signal Power Cable - 10M","description":"\u003ch4\u003eDelve Into the Deep with the Power Cable\u003c\/h4\u003e\n\u003cp\u003eDRS AX \u0026amp; NXT Signal Power Cable - 10M\u003c\/p\u003e\n\u003ch4\u003eCrucial Specs at a Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned especially for DRS AX and NXT systems\u003c\/li\u003e\n\u003cli\u003eGenerous 10-meter length for versatile usage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat to Remember\u003c\/h4\u003e\n\u003cp\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/p\u003e\n\u003ch4\u003eExciting Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSeamless integration with DRS systems\u003c\/li\u003e\n\u003cli\u003eProvides both signal and power connectivity\u003c\/li\u003e\n\u003cli\u003eOptimized for marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eA World of Variations\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDRS AX \u0026amp; NXT Signal Power Cable - 10M\u003c\/li\u003e\n\u003c!-- Add other variations here as needed --\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51551227183350,"sku":"APL130671","price":140.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697087_apl130671_jpeg.jpg?v=1787810695"},{"product_id":"apl117588","title":"Lowrance - Adapter Cable - 7-Pin Blue to Bare Wires","description":"\u003ch4\u003eUnleashing Seamless Connections: The Marine Adapter Cable\u003c\/h4\u003e\n\u003cp\u003eDive into the world of seamless marine connectivity with our state-of-the-art adapter cable. Crafted with precision, this cable is designed to bridge the gap between 7-pin BLUE connections to bare wires, ensuring a smooth and uninterrupted flow of information between your marine devices.\u003c\/p\u003e\n\u003ch4\u003eAn In-Depth Dive: What Makes it Tick\u003c\/h4\u003e\n\u003cp\u003eOur adapter cable boasts impeccable craftsmanship, suitable for any marine environment. Whether you're navigating the high seas or setting anchor at a tranquil bay, this cable will ensure that all your devices remain interconnected, bringing you the ultimate in marine electronic reliability.\u003c\/p\u003e\n\u003ch4\u003eSpotlight Features:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 7-pin BLUE connections\u003c\/li\u003e\n\u003cli\u003ePremium-grade material ensuring longevity\u003c\/li\u003e\n\u003cli\u003eSmooth transition to bare wire endpoints\u003c\/li\u003e\n\u003cli\u003ePerfect for any marine setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51551661424886,"sku":"APL117588","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697415_apl117588_jpeg.jpg?v=1787812297"},{"product_id":"apl646459","title":"Garmin gWind Race\/nWind Connector Adapter Cable Bundle, For Nexus Network, Includes gWind Race Transducer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01403-10 is a gWind Race and nWind connector adapter cable bundle for sailboats that already run a Nexus wind network. It lets you replace an older nWind masthead transducer with a gWind Race transducer while keeping your existing Nexus mast cable, so you can update the sensor without pulling a new cable through the spar.\u003c\/p\u003e\u003cp\u003eThe adapter cable bridges the connector change between nWind and gWind. The gWind Race sensor uses a three-bladed propeller and a twin-fin vane to read wind speed and angle, which helps when you are trying to hold steady numbers in lighter air.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Nexus owners replacing an nWind transducer with a gWind series sensor, using the existing Nexus mast cable.\u003c\/li\u003e\n\u003cli\u003eIncludes an nWind-to-gWind connector adapter cable to mate the new transducer to the legacy mast wiring.\u003c\/li\u003e\n\u003cli\u003egWind Race wind sensor uses a three-bladed propeller and a twin-fin vane for wind speed and angle readings.\u003c\/li\u003e\n\u003cli\u003eSupports a clean retrofit when you want to refresh a masthead sensor without re-running mast wiring.\u003c\/li\u003e\n\u003cli\u003ePropeller installation instructions are included for correct assembly after transport or service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003egWind Race transducer\u003c\/li\u003e\n\u003cli\u003eConnector adapter cable\u003c\/li\u003e\n\u003cli\u003ePropeller installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bundle is intended for boats with an existing Nexus network that previously used an nWind wind transducer. It is a straightforward swap when your mast is already wired with the Nexus mast cable and you want to keep that cable in place.\u003c\/p\u003e\u003cp\u003eIf your boat does not have the Nexus mast cable or you are building a system from scratch, plan the network layout first so the connector style at the masthead matches the rest of your wind instrumentation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMost installs follow a simple path: remove the old nWind transducer, mount the gWind Race transducer in the same location, then connect the adapter cable between the transducer lead and the existing mast cable. Secure the connection so it is not carrying strain from mast movement, and protect the joint from spray and washdowns.\u003c\/p\u003e\u003cp\u003eAfter mounting, confirm vane alignment and check your instrument calibration on the water. Small alignment errors at the masthead show up quickly as persistent wind-angle offsets.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for performance cruisers and race crews who want to keep a proven Nexus instrument setup but replace a worn nWind sensor with the gWind Race style. It also helps when you are chasing intermittent wind readings caused by aging masthead connectors, since the adapter cable refreshes that interface.\u003c\/p\u003e\u003ch6\u003eSafety information\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51552236765430,"sku":"APL646459","price":1199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694300_apl646459_jpeg.jpg?v=1787814235"},{"product_id":"apl586933","title":"Garmin Cigarette Lighter Adapter Cable, 12V, 4-Pin Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10085-00 is a cigarette-lighter adapter cable that powers compatible Garmin handheld GPS units from a 12 V or 24 V DC accessory outlet. It is a simple way to keep a portable navigator running at the helm without cycling through AA batteries during longer runs.\u003c\/p\u003e\u003cp\u003eThis adapter is meant for handhelds that use Garmin’s round 4-pin power\/data connection. Plug the outlet end into a dash-style receptacle (often called a cigarette lighter or cigar socket) and connect the other end to the GPS to run on external power.\u003c\/p\u003e\u003cp\u003eBecause it is a plug-in cable rather than a hardwire lead, it works well for temporary setups, shared handhelds, or moving a unit between a truck, tender, and the primary boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePlugs into a cigarette-lighter style DC outlet for onboard power in 12 V and 24 V systems\u003c\/li\u003e\n\u003cli\u003eRound 4-pin connector for Garmin handheld GPS and GPSMAP units that use this port\u003c\/li\u003e\n\u003cli\u003eKeeps the GPS powered during long passages and day trips, helping reduce battery swaps\u003c\/li\u003e\n\u003cli\u003eQuick connect and disconnect for portable navigation setups with no permanent wiring changes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is determined by the GPS power port, not by the model name alone. This cable matches Garmin handhelds with the round 4-pin connector, including many GPSMAP 60, 76, and 78 series units, as well as GPSMAP 176\/176C, GPSMAP 196, GPSMAP 295, GPSMAP 96\/96C, and several older GPS handheld families such as GPS 12 and GPS 48.\u003c\/p\u003e\u003cp\u003eIf your unit charges over micro-USB or uses a different Garmin connector style, this will not be the right cable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the GPS end first so the handheld is supported, then plug the outlet end into the 12 V or 24 V receptacle. Route the cable so it will not snag on throttles, steering, or hatch edges, and leave enough slack for handheld use on a lanyard or mount.\u003c\/p\u003e\u003cp\u003eMost helm outlets are not watertight. For open boats or spray-prone consoles, use a protected outlet location or unplug and stow the adapter when the area is getting washed down.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis adapter is a good match for boaters who run a handheld as backup navigation, keep a portable GPS in a grab bag, or rely on a GPSMAP handheld for fishing and cruising but want continuous power at the console. It is also useful on vessels with 24 V systems where a handheld still needs a practical way to run from ship’s power.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter use in a salt environment, wipe the cable and plugs with a damp cloth and let everything dry before storage. Periodically check the outlet for corrosion and make sure the connection stays snug so the GPS does not lose power when the boat hits chop.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51552376914166,"sku":"APL586933","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694051_apl586933_jpeg.jpg?v=1787875727"},{"product_id":"apl648582","title":"Garmin USB Voice Control Bundle, OTG Cable, Bluetooth USB Dongle","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13194-00 is a USB voice control bundle that lets you control a compatible Garmin chartplotter by voice when paired with a compatible Bluetooth headset, and it can also work with voice control through a compatible Garmin watch.\u003c\/p\u003e\u003cp\u003eIt’s used on compatible GPSMAP chartplotters including GPSMAP 7x3, 9x3, 12x3, 84xx and 86xx series units, plus the GPSMAP 8700 black box. Once set up, you can speak commands instead of reaching for the touchscreen when the helm is busy.\u003c\/p\u003e\u003cp\u003eThis bundle is a straightforward add-on for boats where you want voice control at the helm without reworking the rest of the system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdds voice control capability to compatible Garmin chartplotters after installation and pairing.\u003c\/li\u003e\n\u003cli\u003eUses Bluetooth connectivity for voice control with compatible wireless headsets.\u003c\/li\u003e\n\u003cli\u003eSupports Apple AirPods wireless headphones where supported by the chartplotter’s voice control compatibility.\u003c\/li\u003e\n\u003cli\u003eCan also pair with a compatible Garmin watch for voice control.\u003c\/li\u003e\n\u003cli\u003eCompatible GPSMAP families include 7x3, 9x3, 12x3, 84xx and 86xx series units, plus GPSMAP 8700 black box systems.\u003c\/li\u003e\n\u003cli\u003eBundle includes the OTG adapter cable and Bluetooth USB dongle needed for the USB-to-Bluetooth setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOTG adapter cable\u003c\/li\u003e\n\u003cli\u003eBluetooth USB dongle\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eVoice control depends on having a compatible Garmin chartplotter model and software that supports the feature. If your chartplotter falls within the supported GPSMAP families, confirm voice control is available in the unit’s menus and settings before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the included hardware to the chartplotter’s USB connection, then pair your headset or watch through the chartplotter’s Bluetooth pairing menu. After pairing, enable voice control and set the voice control language if needed.\u003c\/p\u003e\u003cp\u003eFor best day-to-day use, keep the USB connection point in a protected spot behind the helm so the dongle and cable aren’t exposed to spray or getting bumped during docking.\u003c\/p\u003e\u003ch6\u003eWireless notes\u003c\/h6\u003e\u003cp\u003eHeadsets and Garmin watches connect to the chartplotter using Bluetooth technology for voice control. Bluetooth connections used for voice control are not considered secure, private connections.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup fits well on boats where the helm can get hectic, like docking in tight slips, running in chop, or managing lines and fenders while staying on course. It’s also a practical upgrade for skippers who run solo or fish from the helm and want fewer screen taps while keeping attention outside the boat.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51553367326966,"sku":"APL648582","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696021_apl648582_jpeg.jpg?v=1787820406"},{"product_id":"apl280950","title":"Garmin GPS Antenna Cable, BNC Connectors, 10 m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11454-00 is a 10 m (32 ft) antenna cable with BNC connectors on both ends for running an external GPS antenna to compatible Garmin marine electronics. It is used when the antenna needs to be mounted away from the display or black box so it can “see” the sky while the electronics stay protected at the helm, nav station, or inside the console.\u003c\/p\u003e\u003cp\u003eOn most boats, this is the clean way to reach a hardtop, radar arch, or mast mount without splicing coax. It is an antenna signal cable only and does not replace any power, NMEA 0183, or NMEA 2000 wiring.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your equipment has a BNC antenna connection on the unit side and that your antenna lead also terminates in BNC. If your antenna or device uses SMA or another connector style, it will not mate directly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 m (32 ft) length for routing from a sky-view antenna location back to the electronics mounting position\u003c\/li\u003e\n\u003cli\u003eBNC connectors on both ends for systems that use BNC antenna ports\u003c\/li\u003e\n\u003cli\u003eCommonly paired with Garmin GA 38 passive GPS\/GLONASS antenna installations that use a coax connection\u003c\/li\u003e\n\u003cli\u003eUsed in Garmin AIS 600 installations that accept a BNC-connected GPS antenna feed\u003c\/li\u003e\n\u003cli\u003eAllows a single uninterrupted run to reduce loss and avoid in-line splices in wet lockers and cable chases\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is a match when both the antenna and the receiving device use BNC for the antenna connection. It is typically used to link an external GPS antenna to a compatible Garmin chartplotter, AIS black box, or VHF\/AIS system that supports an external antenna input. If your setup relies on a different connector type at either end, plan for the correct cable style rather than forcing a fit.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that keep electronics below deck or behind the helm and want the antenna mounted where it has a clean view of the sky, such as on a hardtop, radar arch, or a sailboat rail or mast bracket.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eDry-fit the route first and leave a small service loop at both ends so the connectors are not under tension. When pulling through conduit or a rigging tube, protect the BNC ends from snagging and avoid tight bends that can kink coax. Secure the run at intervals to prevent chafe and vibration wear, especially where it passes through bulkheads or under a deck edge.\u003c\/p\u003e\u003cp\u003eBNC connectors lock with a push and twist motion. Make sure each end is fully seated and locked, and keep any connector junctions out of standing water. In exposed areas, add strain relief and weather protection appropriate for your installation location.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the cable where it is clamped and where it enters compartments, looking for flattening, chafe, or corrosion at the connectors. If you remove the cable during service, keep the BNC ends clean and capped until reinstalled to avoid contamination that can affect antenna performance.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51553478705398,"sku":"APL280950","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697232_apl280950_jpeg.jpg?v=1787821628"},{"product_id":"apl615684","title":"Furuno - Power Cable f\/TZT Displays","description":"\u003ch4\u003eUnlock Seamless Power for Your Marine Adventures\u003c\/h4\u003e\n\u003cp\u003eIntroducing the Furuno Power Cable, the ultimate solution to ensure uninterrupted power for your TZT Displays. Designed with precision and engineered for marine enthusiasts, this power cable is your gateway to a seamless navigation experience.\u003c\/p\u003e\n\u003ch4\u003eTechnical Superiority\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty construction for durability in harsh marine environments\u003c\/li\u003e\n\u003cli\u003eHigh-quality materials for reliable and consistent power supply\u003c\/li\u003e\n\u003cli\u003eCompatible with TZT Displays for a perfect fit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\n\u003cp\u003eWhile specific dimensions may vary depending on the variant, rest assured that each Furuno Power Cable is designed with precision to seamlessly integrate into your marine setup.\u003c\/p\u003e\n\u003ch4\u003eExplore the Depths with Clarity\u003c\/h4\u003e\n\u003cp\u003eExperience clarity like never before with customizable color temperature options, allowing you to adapt your display to different lighting conditions.\u003c\/p\u003e\n\u003ch4\u003eHighlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure uninterrupted power supply for your TZT Displays\u003c\/li\u003e\n\u003cli\u003eEngineered for marine durability and reliability\u003c\/li\u003e\n\u003cli\u003eCustomizable color temperature options for enhanced visibility\u003c\/li\u003e\n\u003cli\u003eElegant finishes to match your vessel's style\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51553509507318,"sku":"APL615684","price":92.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697023_apl615684_jpeg.jpg?v=1787821927"},{"product_id":"apl200891","title":"Garmin Vehicle Power Cable, For Rino 610\/650\/655t, Cigarette Lighter","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11598-00 is a vehicle power cable that lets you run and charge a Rino 600 series handheld from a standard cigarette-lighter style power outlet. It is a straightforward way to keep a Rino 610, 650, or 655t powered up without relying only on spare batteries when you are traveling between spots.\u003c\/p\u003e\u003cp\u003eWhen connected, it charges the device’s rechargeable lithium-ion battery pack and can power the unit’s functions except for the radio transmitter. For radio use, keep a charged battery pack installed in the handheld even while it is plugged in.\u003c\/p\u003e\u003cp\u003eOn a boat, this cable is commonly used at the helm or in the cabin with a 12 V accessory outlet, keeping a handheld ready for navigation, tender runs, or dockside planning while staying topped up.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePlugs into a standard cigarette lighter receptacle for easy power from a vehicle or boat accessory outlet.\u003c\/li\u003e\n\u003cli\u003eMade for Garmin Rino 600 series handhelds, including Rino 610, 650, and 655t.\u003c\/li\u003e\n\u003cli\u003eCharges the rechargeable lithium-ion battery pack while the handheld is connected.\u003c\/li\u003e\n\u003cli\u003ePowers the handheld’s functions while connected, with the radio transmitter remaining battery-powered.\u003c\/li\u003e\n\u003cli\u003eUseful for extended trips where the unit is left on for mapping and navigation without swapping batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is specific to the Rino 600 series charging interface, so it is not a universal USB lead. Match your handheld model (Rino 610, 650, or 655t) before ordering, especially if you have multiple Garmin devices on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlug the adapter into the power outlet, then connect the device-side plug to the Rino. For clean installs on a boat, route the cable so it cannot snag on the wheel, throttle, or seat slides, and leave enough slack at the handheld for normal handling without pulling on the connector.\u003c\/p\u003e\u003ch6\u003eUse notes on board\u003c\/h6\u003e\u003cp\u003eFor best day-to-day use, treat the connection like any cabin accessory and keep it out of direct spray. If you regularly transmit on the Rino’s radio, plan around the battery requirement for transmitting by starting with a charged pack and leaving it installed during use.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51553521271030,"sku":"APL200891","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694183_apl200891_jpeg.jpg?v=1787822004"},{"product_id":"apl172639","title":"Furuno - 6 Pin NMEA Cable","description":"\u003ch4\u003eUnravel the Sea’s Secrets with Precision\u003c\/h4\u003e\n\u003cp\u003eWhen it comes to marine adventures, accuracy is crucial. Dive deep into the realm of seamless connectivity with our NMEA Cable, an indispensable marine accessory built to offer unmatched performance. Experience a hassle-free connection with our 1 x 6 Pin Connector, tailored for those who crave perfection.\u003c\/p\u003e\n\u003ch4\u003eKey Technical Insights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior NMEA compatibility.\u003c\/li\u003e\n\u003cli\u003eEfficient 1 x 6 Pin Connector for seamless connections.\u003c\/li\u003e\n\u003cli\u003eDurable 5 Meters length to ensure wide-range accessibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eHighlights at a Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUnparalleled durability for long-term use.\u003c\/li\u003e\n\u003cli\u003eFlexible 5 Meters length for versatile applications.\u003c\/li\u003e\n\u003cli\u003eEfficient connection with the 1 x 6 Pin Connector.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51553854685430,"sku":"APL172639","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696724_apl172639_jpeg.jpg?v=1787824222"},{"product_id":"apl753903","title":"Garmin Vehicle Power Cable, For dezl OTR800\/810\/1000\/1010, RV 890\/895\/1090\/1095, 12\/24V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12982-05 is a vehicle power cable that plugs into a 12 V accessory outlet and powers compatible Garmin dezl and RV GPS navigators.\u003c\/p\u003e\u003cp\u003eOn a boat it works the same way: plug it into a helm or nav-station 12 V socket and route the lead to your navigator so it stays powered during long days underway or while planning at the dock. The cable is 3 feet long, which suits tight dashboards and console installs where you want minimal slack.\u003c\/p\u003e\u003cp\u003eThis cable is best kept in a protected mounting area. Keep the plug and connector out of direct spray, and avoid routing it where it can chafe on sharp edges or get pinched by a sliding mount.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 V plug for standard accessory outlets commonly installed at helms and nav stations\u003c\/li\u003e\n\u003cli\u003e3 ft cable length for tidy routing on a dash, console, or inside a protected electronics box\u003c\/li\u003e\n\u003cli\u003eMade for Garmin dezl OTR800, OTR810, OTR1000, and OTR1010 navigators\u003c\/li\u003e\n\u003cli\u003eAlso compatible with Garmin RV 890, RV 895, RV 1090, and RV 1095 navigators\u003c\/li\u003e\n\u003cli\u003ePowers one compatible device from a single outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eVehicle power cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch your navigator model to the supported dezl OTR and RV units listed above. This cable is not intended for fixed-mount marine chartplotters and it does not connect into NMEA networks.\u003c\/p\u003e\u003cp\u003eIf your boat has a 24 V house system, use a properly protected 12 V outlet at the mounting location or a regulated step-down supply.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlug the adapter into a clean 12 V accessory socket, then route the cable so it does not interfere with steering, throttle, or a gimbal mount. In high-vibration areas, a small strain-relief point helps keep the connector seated and reduces wear on the cable over time.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable makes sense when you use a compatible Garmin dezl or RV navigator as a planning screen at the dock, in the cabin, or on a trailerable boat where the same unit moves between the tow vehicle and the helm. It is also handy as a simple way to keep the navigator powered during long transits when you want the screen on without relying on the internal battery.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51553859797238,"sku":"APL753903","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280127_apl753903.webp?v=1787824298"},{"product_id":"apl839415","title":"Garmin GST 10 NMEA 2000 Water Speed\/Temp Analog Adapter, IPX7, Includes T-Connectorog Adapter","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11328-00 is an analog-to-NMEA 2000 adapter that brings water speed and water temperature from a compatible transducer into your NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eOnce it is on the backbone, any compatible display on the network can show water-referenced speed and temperature. It draws power from the NMEA 2000 bus (9 to 16 Vdc), is IPX7 waterproof for spray and washdowns, and is rated for a temperature range of 5°F to 158°F (-15°C to 70°C). The module measures 31\/32 x 43\/64 x 3 3\/32 in. (24.7 x 17.0 x 78.6 mm) and has a total cable length of 16 ft (4.9 m).\u003c\/p\u003e\u003cp\u003ePlan the mounting spot so the unit sits between the sensor and the NMEA 2000 backbone and stays within 173 in. (4.4 m) of the sensor connection, since that sensor lead is not extendable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConverts analog water-speed and water-temperature sensor signals into NMEA 2000 data for use across the network.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 certified; transmits PGN 128259 (Speed, water referenced) and PGN 130312 (Temperature).\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA 2000 bus (9 to 16 Vdc); 0.9 W max draw; LEN 1 (50 mA).\u003c\/li\u003e\n\u003cli\u003eIPX7 waterproof housing suited to areas that see spray and washdowns; avoid locations that stay submerged.\u003c\/li\u003e\n\u003cli\u003eInstallation constraints are easy to plan for: keep the module within 173 in. (4.4 m) of the sensor and use a NMEA 2000 drop cable up to 20 ft (6 m) if the backbone connection is not close by.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe sensor-side connector mates directly to compatible Garmin water-speed and temperature sensors, including Garmin (Airmar ST850) thru-hull water-speed and water-temperature sensor (010-11413-00), Garmin (Airmar T80) water-temperature sensor (010-11413-01), and the Garmin transom-mount water-speed sensor (010-10279-02). Sensors are not included.\u003c\/p\u003e\u003cp\u003eOn the network side, it connects to a standard NMEA 2000 backbone through a T-connector. If it cannot reach the backbone directly, a drop cable can be used (up to 20 ft \/ 6 m).\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a spot that stays dry most of the time but can handle spray, then secure it so it cannot vibrate or chafe. Keep it at least 2 in. (5 cm) from a magnetic compass to avoid interference.\u003c\/p\u003e\u003cp\u003eAfter connecting the sensor and joining the NMEA 2000 backbone, calibrate the water speed from the NMEA 2000 device list on your compatible display. Temperature source location and offset can also be set so the network labels and readings match how your boat is rigged.\u003c\/p\u003e\u003ch6\u003eElectrical and network integration\u003c\/h6\u003e\u003cp\u003eThis adapter is powered by the NMEA 2000 bus, so it belongs on a correctly powered backbone with a single network power connection. Once installed, speed and temperature data are available anywhere on the network, which is useful on boats with more than one display station.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGST 10 water speed and temperature analog adapter\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554016493814,"sku":"APL839415","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694139_apl839415_jpeg.jpg?v=1787826731"},{"product_id":"apl530772","title":"Standard Horizon - 12V DC Charge Cable - For HX400, HX400IS","description":"\u003ch4\u003eStay Powered on the Waves: Standard Horizon 12V DC Charge Cable for HX400 Series\u003c\/h4\u003e\n\u003cp\u003eEnsure your marine adventures are never cut short due to a lack of power with the Standard Horizon 12V DC Charge Cable, specially designed for the HX400 and HX400IS hand-held radios. This essential accessory allows you to keep your communication devices charged and ready, directly from your vessel's 12V power source. Whether you're navigating the open seas or anchored in a serene bay, this DC charge cable is your assurance of continuous, reliable communication. Tailored specifically for the HX400 series, it guarantees compatibility and optimal charging efficiency, making it a must-have for any serious mariner.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12V DC power supply ensures your radio is always charged while on the move.\u003c\/li\u003e\n\u003cli\u003eDesigned exclusively for the HX400 and HX400IS models, ensuring perfect compatibility.\u003c\/li\u003e\n\u003cli\u003eEssential for long voyages or extended periods at sea.\u003c\/li\u003e\n\u003cli\u003eCompact and durable design, ideal for the harsh marine environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Connectivity for Seamless Communication\u003c\/h4\u003e\n\u003cp\u003eThe 12V DC Charge Cable by Standard Horizon bridges the gap between power source and communication necessity. It is engineered to meet the specific power requirements of the HX400 and HX400IS models, providing a secure and efficient charge every time. With this dedicated charging solution, you can ensure your marine radios are always operational, ready to facilitate clear and uninterrupted communication whenever needed.\u003c\/p\u003e\n\u003ch4\u003eDesigned for the Demanding Sea\u003c\/h4\u003e\n\u003cp\u003eUnderstanding the challenges of the marine environment, this 12V DC Charge Cable is built to last. Its rugged construction ensures durability against salt, moisture, and other corrosive elements, guaranteeing longevity and reliability. Compact in design, it is easy to store and access, making it an unobtrusive yet invaluable addition to your maritime gear.\u003c\/p\u003e\n\u003ch4\u003eEssential Gear for Every Mariner\u003c\/h4\u003e\n\u003cp\u003eThe Standard Horizon 12V DC Charge Cable for the HX400 and HX400IS is more than just an accessory; it's a lifeline that keeps your communication devices powered in the most critical moments. By ensuring your radios are always charged, you maintain a vital link to the rest of the world, enhancing both the safety and enjoyment of your marine adventures. Make this charge cable a staple in your navigational toolkit and sail with confidence, knowing you're always connected.\u003c\/p\u003e","brand":"Standard Horizon","offers":[{"title":"Default Title","offer_id":51554087239926,"sku":"APL530772","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715557_apl530772.jpg?v=1787828044"},{"product_id":"apl978679","title":"Garmin OnDeck In\/Out Data Cable, For OnDeck Hub, Sensor\/Relay Output, 19-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13009-04 is a replacement OnDeck In\/Out Data Cable with a 19-pin connector for sensor and relay output connections on a compatible OnDeck Hub.\u003c\/p\u003e\u003cp\u003eIt is used when the original I\/O lead is damaged, missing, or you are reworking a vessel monitoring install and want a fresh cable run. This is the wired link between the hub and the external inputs and outputs used for onboard monitoring and switching.\u003c\/p\u003e\u003cp\u003eBecause this is the 19-pin version, confirm your hub uses the matching in\/out port before ordering, and plan the routing so the connector lives in a protected location away from spray and washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement 19-pin In\/Out data cable for a compatible Garmin OnDeck Hub\u003c\/li\u003e\n\u003cli\u003eSupports sensor connections and relay output wiring used by the OnDeck system\u003c\/li\u003e\n\u003cli\u003e19-pin connector interface for the hub’s in\/out port\u003c\/li\u003e\n\u003cli\u003eBlack cable jacket for a clean, low-visibility install in lockers and electrical spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMade for an OnDeck Hub that uses the 19-pin in\/out connector for sensor and relay output wiring. If your hub uses a different connector style, this cable will not connect.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing cable, match the connector style and pin count at the hub end first, then verify you have a routing path from the hub mounting location to where your I\/O wiring is managed.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eShut down power to the OnDeck system before swapping cables. Route the new cable with a service loop at the hub, then secure it every so often so it cannot chafe on fiberglass edges, aluminum brackets, or moving gear.\u003c\/p\u003e\u003cp\u003eIn damp lockers and engine-room-adjacent spaces, add strain relief and keep the connector and any junction points above the sole where possible. A simple drip loop and a protected mounting location go a long way toward avoiding corrosion and intermittent connections later.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boaters running an OnDeck Hub who need a dependable sensor and relay output connection point for ongoing vessel monitoring, refits, or troubleshooting a damaged harness.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554189181174,"sku":"APL978679","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695761_apl978679_jpeg.jpg?v=1787829958"},{"product_id":"apl604873","title":"Garmin 6-Pin to 8-Pin Transducer Adapter Box, Wire Block, IPX7, 24 in Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11613-00 is an 8-pin female to wire block adapter that lets you reuse a legacy 6-pin, non-differential transducer with a Garmin sounder connection that expects an 8-pin plug.\u003c\/p\u003e\u003cp\u003eIt’s built as a compact adapter box (4.1 x 2.3 x 1.9 in.) with a 24 in (61 cm) lead to the 8-pin connector, so you can mount the box where the transducer cable is accessible while keeping the 8-pin connection neat at the back of the display or sonar module. The housing carries an IPX7 water rating (IEC 529), but it should be installed where it won’t be submerged.\u003c\/p\u003e\u003cp\u003eThis is a practical fit when you’re upgrading electronics but don’t want to haul out or disturb a working thru-hull or in-hull transducer. It’s not intended for Garmin differential 8-pin transducers that already plug directly into an 8-pin port.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8-pin female connector on the Garmin side with an internal wire block for bare-wire transducer terminations\u003c\/li\u003e\n\u003cli\u003eWire block supports depth +\/-, shield, ground, temperature, XID, and speed sensor power\/data connections\u003c\/li\u003e\n\u003cli\u003e24 in (61 cm) adapter cable helps you place the box where you can route and secure the legacy transducer lead cleanly\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating (IEC 529) for incidental water exposure when mounted above standing water\u003c\/li\u003e\n\u003cli\u003eMounting guidance calls for keeping the box at least 6 in (15.25 cm) from motors and other common sources of electrical interference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse it when you have a legacy Garmin or Airmar 6-pin, non-differential transducer that you want to hard-wire into a Garmin system with an 8-pin transducer connection. Common applications include installations with echoMAP 50s and 70s, GPSMAP 4xx, 5xx, and 7xx units, and GSD 24 sounder systems that use an 8-pin transducer port.\u003c\/p\u003e\u003cp\u003eIf your transducer is a Garmin differential 8-pin model, it should connect directly to the 8-pin port instead of being cut and terminated into an adapter box.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a cut-and-terminate install. The legacy transducer connector is cut off, the outer jacket is stripped back about 3 1\/2 in (90 mm), and each conductor is stripped about 1\/4 in (6 mm) before landing the wires on the internal block using a 3 mm flat screwdriver. Tinning the stripped conductors is recommended, but not required.\u003c\/p\u003e\u003cp\u003eAfter the connections are secure, tighten the cable gland around the transducer cable with a 13\/16 in (21 mm) wrench to clamp the jacket and help keep water out of the housing. If the transducer does not have temperature capability, the wire block requires a jumper between terminals 4 and 5 (ground and temperature) to complete the circuit.\u003c\/p\u003e\u003cp\u003eMount the box where it stays out of bilge water, has strain relief on both sides of the cable, and can be reached later if you ever need to re-terminate wires. Keeping it away from high-current runs and ignition wiring helps reduce noise that can show up as clutter on the sounder return.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few runs, re-check the cable gland for snugness and inspect the housing for any signs of water intrusion. In saltwater environments, a quick fresh-water rinse around the outside of the box during routine washdowns helps keep grime and salt buildup from working into cable entries over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554260025590,"sku":"APL604873","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694207_apl604873_jpeg.jpg?v=1787832013"},{"product_id":"apl574135","title":"Furuno - AIR-033-204 Adapter Cable","description":"\u003ch4\u003eDive Deeper with the Right Connection\u003c\/h4\u003e\n\u003cp\u003eDiscover our cutting-edge adapter cable tailored for marine enthusiasts and professionals. Seamlessly integrate your 8-pin transducer to a 10-pin sounder, ensuring smooth communication and enhanced performance.\u003c\/p\u003e\n\u003ch4\u003eSuperior Technical Backbone\u003c\/h4\u003e\n\u003cp\u003eOur Adapter Cable is designed to be durable, efficient, and provide the utmost precision in connecting your transducer to the sounder. With advanced insulation and sturdy pin connectors, it's the perfect marine companion.\u003c\/p\u003e\n\u003ch4\u003eDimensional Blueprint\u003c\/h4\u003e\n\u003cp\u003eWhile the specifics can vary, the typical dimensions of our product ensure it's both compact and robust enough for regular usage. Please refer to the product packaging or accompanying manual for the exact dimensions.\u003c\/p\u003e\n\u003c!-- If there were color temperatures for this product (e.g. for LED lights), we would put them here. But since this is an adapter cable, we'll skip it. --\u003e\n\u003ch4\u003eChoose Your Finish\u003c\/h4\u003e\n\u003cp\u003eWhile our Adapter Cable comes in a sleek, default design, we are always working on expanding our range to provide variations in finish, from matte to glossy, and even metallic. Ensure your tech doesn't just work great, but looks great too!\u003c\/p\u003e\n\u003ch4\u003eKey Highlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect integration from 8-pin transducer to 10-pin sounder.\u003c\/li\u003e\n\u003cli\u003eDurable construction with advanced insulation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51554273100022,"sku":"APL574135","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696676_apl574135_jpeg.jpg?v=1787832754"},{"product_id":"apl506988","title":"Garmin 4-Pin Power\/Data Cable, For echoMAP Series, NMEA 0183 I\/O","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12199-04 is a 4-pin power\/data cable used to hard-wire a compatible Garmin display while also giving you NMEA 0183 input and output leads for basic data sharing on board. The harness is 6 ft (1.8 m) long, which is typically enough to run from a helm mount to a nearby distribution panel or behind-console wiring space.\u003c\/p\u003e\u003cp\u003eIt is commonly used when you want a clean permanent install and need both power and a simple NMEA 0183 link, such as exchanging position or navigation data with another NMEA 0183 device. One end plugs into the unit’s 4-pin power\/data port, and the opposite end is for terminating to your boat’s DC supply and any NMEA 0183 connections per your system plan.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-pin connector for Garmin units that use a 4-pin power\/data port\u003c\/li\u003e\n\u003cli\u003e6 ft (1.8 m) overall cable length for typical helm and console routing\u003c\/li\u003e\n\u003cli\u003eSingle harness carries both power and data, keeping the installation simpler than separate runs\u003c\/li\u003e\n\u003cli\u003eIncludes NMEA 0183 input and output conductors for interfacing with NMEA 0183 electronics\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used across many Garmin echoMAP models and other Garmin fishfinder or chartplotter families that specify a 4-pin power\/data connection. Before ordering, confirm your unit has the matching 4-pin port, since some Garmin models use different connector styles and this is not a transducer cable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the route so the connector end reaches the display without strain, and keep the run away from sharp edges, moving parts, and high-heat areas. Terminate the power leads to a properly protected DC circuit and follow your display’s installation guide for fuse or breaker sizing, wire gauge, and any required grounding practices.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe NMEA 0183 conductors are intended for point-to-point data connections, so wiring details depend on what you are linking and which sentences you need to pass. If your boat uses NMEA 2000 networking, that backbone uses separate cabling, while this harness handles power plus NMEA 0183 in and out where needed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for a helm install where the display is hard-wired and you want a straightforward way to bring in or send out NMEA 0183 data without adding extra adapters. It also fits refits where an older 4-pin power\/data harness needs replacement after years of heat, vibration, and salt exposure.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554284536054,"sku":"APL506988","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694314_apl506988_jpeg.jpg?v=1787833058"},{"product_id":"apl575988","title":"Garmin 7-Pin Power\/Data Cable, For GMI 20\/GHC 20, 90° Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11129-00 is a 7-pin power\/data cable with a 90-degree connector used to wire compatible Garmin instruments to a NMEA 0183 device while also bringing in DC power. The right-angle plug helps when the instrument is flush-mounted and you have limited clearance behind the panel.\u003c\/p\u003e\u003cp\u003eThis cable is typically used during installs and refits where a Garmin GMI or GHC head needs to talk to existing NMEA 0183 equipment. It keeps the connection at the instrument tidy and reduces stress on the plug in tight helm pods and instrument clusters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e7-pin power\/data interface with a 90-degree connector to help with tight behind-the-dash installs and flush mounts\u003c\/li\u003e\n\u003cli\u003eSupports NMEA 0183 wiring for data connections alongside power in a single run to the instrument\u003c\/li\u003e\n\u003cli\u003eCompatible with Garmin GHC 20, GMI 20, GNX 20, and GNX 21 marine instruments\u003c\/li\u003e\n\u003cli\u003eUseful for clean cable routing where the connector needs to turn immediately after the back of the unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this cable with Garmin devices that accept the 7-pin power\/data connector, including GHC 20, GMI 20, GNX 20, and GNX 21. It is intended for NMEA 0183 connections, so confirm your target device is an NMEA 0183 talker or listener and that you have access to its signal and ground wiring.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan your routing so the 90-degree connector exits in the direction that best matches your available space behind the mounting surface. Leave enough slack to service the instrument later, and secure the harness so vibration does not work the connector loose over time.\u003c\/p\u003e\u003cp\u003eIn wet locations, route the cable with a drip loop and keep any splices or terminal blocks out of splash zones. Avoid running NMEA 0183 signal conductors alongside high-current DC runs for long distances to reduce the chance of noise getting into the data lines.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis cable is used to bring vessel DC power to the instrument and to connect NMEA 0183 data lines to another device. Follow the wiring diagrams for both ends so polarity and talker\/listener connections are correct, and protect the power feed with the fuse rating specified for the connected Garmin instrument.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for helm upgrades where you are keeping legacy NMEA 0183 gear and want a clean connection to a Garmin instrument head. It is also helpful on compact consoles and sailboat pods where the space behind the panel makes a straight connector hard to fit.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554396963062,"sku":"APL575988","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694335_apl575988_jpeg.jpg?v=1787835977"},{"product_id":"apl072028","title":"Garmin NMEA 2000 Backbone\/Drop Cable, 4 m, Case of 5","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11076-04CASE is a case of five NMEA 2000 backbone\/drop cables, each 4 m (13 ft) long, for extending a Micro-C NMEA 2000 network backbone or reaching devices that sit farther off the trunk line.\u003c\/p\u003e\u003cp\u003eIt is the cable you use when your existing backbone pieces are not long enough between T-connectors, or when you need a longer run from the top of a T-connector to a device mounted away from the backbone. Because it uses NMEA 2000 Micro-C connectors, it matches the connector style found on many marine electronics networks.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCase of 5 cables for building out multiple stations or keeping spares onboard\u003c\/li\u003e\n\u003cli\u003e4 m (13 ft) length per cable to bridge longer runs through consoles, under decks, or across equipment bays\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 Micro-C connectors for straightforward integration with Micro-C style networks\u003c\/li\u003e\n\u003cli\u003eWorks as a backbone extension between T-connectors or as a device drop when used within NMEA 2000 drop-length limits\u003c\/li\u003e\n\u003cli\u003eHelps keep network joins in serviceable locations instead of forcing connections into tight cutouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eFive NMEA 2000 backbone\/drop cables, 4 m (13 ft) each\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable fits NMEA 2000 networks that use Micro-C connectors. If your boat already has a backbone built with the larger Mini connector system, you will need a Micro-C to Mini conversion at the transition point.\u003c\/p\u003e\u003cp\u003eWhen using one as a device drop, keep the total run from the T-connector to the device within NMEA 2000 guidelines. A 4 m drop is within the common maximum length for a single drop.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable so it is supported along the run and not hanging by the connectors. In areas with vibration, add strain relief and avoid tight bends right at the connector backshell.\u003c\/p\u003e\u003cp\u003eThread the connector collar by hand until snug. Place joins where you can reach them later, and keep connectors out of spots that sit wet or take direct washdown whenever possible.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis five-pack makes sense when you are extending a backbone from a lower helm to an upper helm, adding an AIS or engine gateway mounted away from the main electronics cluster, or building a clean NMEA 2000 layout with longer spans between T-connectors.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554448736502,"sku":"APL072028","price":174.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280018_apl072028.webp?v=1787837539"},{"product_id":"apl251674","title":"Garmin GPSMAP 8400\/8600 HDMI Cable, 15 ft, Water-Resistant","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12390-20 is a 15 ft (4.5 m) HDMI cable for connecting a GPSMAP 8400 or 8600 series chartplotter to an HDMI video source or an external display. It supports Full HD video up to 1080p and uses a water-resistant connection that stays secure in a helm environment.\u003c\/p\u003e\u003cp\u003eOn compatible GPSMAP 8400\/8600 units, HDMI video can be shown full-screen or in a split-screen layout alongside navigation and sonar views. Audio can ride with the HDMI feed for playback on the chartplotter, and feeding that audio into an onboard stereo setup typically calls for a separate NMEA audio connection.\u003c\/p\u003e\u003cp\u003eThis cable makes sense for boats that want a camera feed at the helm, a computer connected for planning and display, or a second screen where the operator can still see what is happening on the chartplotter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e15 ft (4.5 m) length for typical helm-to-console routing\u003c\/li\u003e\n\u003cli\u003eFits GPSMAP 8400 and 8600 series chartplotters equipped with an HDMI connection\u003c\/li\u003e\n\u003cli\u003eSupports Full HD video up to 1080p for external video sources and compatible displays\u003c\/li\u003e\n\u003cli\u003eWater-resistant, secure chartplotter-side connection suited to marine installs\u003c\/li\u003e\n\u003cli\u003eVideo viewing supports full-screen or split-screen layouts on compatible GPSMAP 8400\/8600 units\u003c\/li\u003e\n\u003cli\u003eTouchscreen control of a connected computer requires a USB connection in addition to HDMI\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the run like any other helm cable: keep it protected from chafe, avoid tight bends, and route it where vibration will not work the cable against sharp fiberglass edges or metal. Make the final connections in a dry area, then dress and secure the cable so the connector is not carrying strain.\u003c\/p\u003e\u003cp\u003eIf your installation needs more than 15 ft, extend the run with an active HDMI cable and an HDMI coupler rather than relying on a long passive extension. This helps maintain signal integrity when the cable has to travel through larger consoles or up to a remote monitor.\u003c\/p\u003e\u003ch6\u003eCompatibility and video integration\u003c\/h6\u003e\u003cp\u003eThis is an HDMI accessory cable intended for GPSMAP 8400\/8600 series chartplotters and other compatible Garmin marine displays that use the same HDMI connection. It can be used either to bring HDMI video into the chartplotter or to send the chartplotter video to a monitor or TV, depending on how your system is set up and what your display supports.\u003c\/p\u003e\u003cp\u003eCommon sources include onboard camera systems, media devices, and computers. Devices with DVI-D video output can be used with a standard DVI-to-HDMI adapter or cable when needed, and phones or tablets generally require an external adapter or dongle to provide HDMI.\u003c\/p\u003e\u003ch6\u003eAudio notes\u003c\/h6\u003e\u003cp\u003eHDMI carries both video and audio, but how that audio is handled on a boat depends on the rest of the system. If the goal is to hear the HDMI source through your boat stereo rather than on the chartplotter itself, plan on integrating audio through the appropriate NMEA audio connection and matching stereo inputs.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eFor fishing boats, this cable is a clean way to bring a live camera view to the chartplotter while keeping charts visible on the same screen. On cruisers and larger center consoles, it is also useful when you want a second display at the helm or in the cockpit that mirrors what is shown on the chartplotter.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554503131382,"sku":"APL251674","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280015_apl251674.jpg?v=1787839204"},{"product_id":"apl370158","title":"Garmin Vehicle Power Cable, For Rino 520\/530, 12V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10570-00 is a 12-volt vehicle power cable that plugs into a standard cigarette-lighter style outlet to keep a Rino handheld powered and charging while you are underway. It matches the Rino 500 series power connection used on the Rino 520 and Rino 530, which makes it a practical way to run a handheld from a 12 V accessory socket at the helm, inside the cabin, or in a chase vehicle on the way to the ramp.\u003c\/p\u003e\u003cp\u003eThis cable charges the Rino rechargeable lithium-ion battery pack and can power the handheld while it is connected. The radio transmitter is still powered by the device’s rechargeable battery, so transmitting depends on having a charged pack installed even when external power is plugged in.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePlugs into a standard 12 V cigarette-lighter or accessory outlet for in-vehicle or on-boat power.\u003c\/li\u003e\n\u003cli\u003eMolded Garmin connector fits the Rino 500 series port used on Rino 520 and Rino 530 handhelds.\u003c\/li\u003e\n\u003cli\u003eCharges the rechargeable lithium-ion battery pack while powering the handheld.\u003c\/li\u003e\n\u003cli\u003eRadio transmitter remains battery-powered, which helps avoid unexpected transmit dropouts when external power is present.\u003c\/li\u003e\n\u003cli\u003eCigarette-lighter plug includes removable fuse protection to help protect the cable and connected equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the vehicle-style power lead for Garmin Rino 500 series handhelds and is commonly used with the Rino 520 and Rino 530. It is not a USB charging cable, and it does not replace the radio battery requirement for transmitting.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConnect the cigarette-lighter plug to a 12 V accessory socket, then connect the molded Garmin plug to the handheld. On a boat, routing the cable so it is supported and not pulled tight helps prevent intermittent power when the console is bouncing. A dry, protected mounting area for the outlet helps keep salt spray out of the socket and reduces corrosion on the contacts.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boaters who keep a Rino handheld at the helm for backup position checks, dockside moves, or tender trips and want to keep the battery topped up between stops. It also fits crews that rely on the handheld for location sharing and radio coordination and want a simple way to keep power available during longer runs.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the cable and plugs with a lightly damp cloth after use around saltwater, then let everything dry before stowing. If power becomes intermittent, inspecting the accessory socket for corrosion and checking the plug’s fuse are quick first steps.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554554085622,"sku":"APL370158","price":39.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1279901_apl370158.webp?v=1787840632"},{"product_id":"apl773152","title":"Lowrance - Waterproof HDMI Cable - M to std M, 3M","description":"\u003ch4\u003eDive into Crystal Clear Connections\u003c\/h4\u003e\n\u003cp\u003eExperience the brilliance of the underwater world combined with high-definition connectivity. Introducing the Waterproof HDMI Cable M to std M - perfectly engineered for marine enthusiasts who won't compromise on quality, even beneath the waves.\u003c\/p\u003e\n\u003ch4\u003eUnveiling the Tech Beneath the Waves\u003c\/h4\u003e\n\u003cp\u003eEvery inch of our Waterproof HDMI Cable has been meticulously designed to ensure unwavering performance when you need it the most. Whether you're exploring coral reefs or capturing the majesty of the ocean's depths, rely on this cable to transmit crystal clear visuals and sound without interruption.\u003c\/p\u003e\n\u003ch4\u003eHighlights to Make a Splash\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUtmost waterproof protection for reliable underwater use\u003c\/li\u003e\n\u003cli\u003eSeamless HDMI to HDMI (std M) compatibility\u003c\/li\u003e\n\u003cli\u003e3M length perfect for diverse marine arrangements\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51554777825526,"sku":"APL773152","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697516_apl773152_jpeg.jpg?v=1787842276"},{"product_id":"apl291316","title":"Garmin USB OTG Adapter Cable, For GPSMAP 8400\/8600, 6 ft, Water-Resistant Connection","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12390-11 is a 6-foot (1.8 m) OTG adapter cable that lets a GPSMAP 8400 or 8600 series chartplotter power an external device over USB. It gives you a secure, water-resistant connection at the chartplotter end so the USB power lead can live behind the helm without feeling like a loose electronics cord.\u003c\/p\u003e\u003cp\u003eOn board, it is commonly used to keep a phone topped up at the console or to run a small USB-powered accessory from the chartplotter. It can also supply power to streaming devices like Chromecast or Roku when paired with an HDMI coupler and HDMI cable (not included) for streaming video to the chartplotter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for GPSMAP 8400 and 8600 series chartplotters\u003c\/li\u003e\n\u003cli\u003e6-foot (1.8 m) cable length for easier routing from the display to a mounting shelf, glovebox, or electronics locker\u003c\/li\u003e\n\u003cli\u003eSecure, water-resistant connection at the chartplotter end for typical helm spray and washdown environments\u003c\/li\u003e\n\u003cli\u003ePowers an external device via USB from the chartplotter, such as a phone or media player\u003c\/li\u003e\n\u003cli\u003eCan supply USB power for Chromecast or Roku when used with an HDMI coupler and HDMI cable (not included) to stream video to the chartplotter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter cable is intended for Garmin GPSMAP 8400 and 8600 series chartplotters. Confirm your display family before ordering, especially if your boat has multiple Garmin displays from different generations.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the run like any helm wiring: keep a drip loop where it makes sense, avoid tight bends, and support the cable so vibration does not work the connection loose over time. The 6-foot length is usually enough to reach from the back of a flush-mounted display to a protected storage spot where you can plug and unplug a USB device without pulling the display.\u003c\/p\u003e\u003cp\u003eFor streaming sticks, power the device from this cable and use the appropriate HDMI coupler and HDMI cable (not included) for the video connection. Keep the streaming device in a dry, ventilated spot behind the console so it stays accessible but out of direct spray.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical add-on for boats where the helm becomes the charging station during long days of navigation or fishing. It also fits installations where you want video streaming at anchor without running an extra USB power lead from a separate outlet.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf the connection lives in a saltwater cockpit, a quick wipe-down after washdowns helps keep residue from building up around the plug area. Check the routing occasionally for chafe points and re-secure the cable if it has started to move with vibration.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554796372214,"sku":"APL291316","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694408_apl291316_jpeg.jpg?v=1787843217"},{"product_id":"apl514682","title":"Garmin GPS Power\/Data Cable, For GPS 73 \u0026 GPSMAP 78\/79\/86, 4-Pin Round Connector, Bare Wire Ends, NMEA 0183","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10082-00 is a power and data cable that hard-wires compatible Garmin handheld GPS units to a boat’s DC system and to other onboard electronics. It uses a round 4-pin connector at the GPS end and bare wire leads on the other end, with a 1.8 m (6 ft) overall length for routing behind a helm or through a console.\u003c\/p\u003e\u003cp\u003eOnce connected, it can power the handheld while also carrying position and speed data to equipment such as chartplotters, computers, autopilots, or radar. This is a practical way to keep a handheld running at the helm without relying on batteries or a plug-in adapter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRound 4-pin connector to fit compatible Garmin handheld and portable GPS units\u003c\/li\u003e\n\u003cli\u003eBare wire leads for hardwiring to a DC feed and making data connections\u003c\/li\u003e\n\u003cli\u003eSupports sharing position and speed data with connected marine electronics\u003c\/li\u003e\n\u003cli\u003e1.8 m (6 ft) cable length for clean routing through a dash, console, or nav station\u003c\/li\u003e\n\u003cli\u003eGood match for fixed mounting where the handheld stays on board and powered up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePower\/data cable with round 4-pin connector and bare wire leads\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used with Garmin handheld and portable units that have the round 4-pin power\/data port. It’s commonly used with Garmin GPS 73 and GPSMAP 78, GPSMAP 79, and GPSMAP 86 series handhelds, along with older Garmin GPS and GPSMAP units that use the same 4-pin interface.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the connector style on the back of your device. Some Garmin models use different power\/data plugs, so the port shape matters more than the name on the bezel.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThe bare wire end is meant for a permanent install. Route the cable so it stays supported and avoids sharp edges, hinge points, and spots where it can chafe under vibration.\u003c\/p\u003e\u003cp\u003eConnect the power leads to a fused DC supply that matches what your handheld expects, and keep splices in a dry location when possible. On open boats or exposed runs, use sealed connectors and add strain relief so the wire terminations do not carry the load.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe data leads can be used for NMEA 0183 serial connections when your handheld is configured to output data. This is useful when you want the handheld’s GPS position to be available to another device on board, such as an autopilot, chartplotter, or computer interface.\u003c\/p\u003e\u003cp\u003eWire the data and ground\/reference leads to the receiving device’s NMEA 0183 input as required by that device. Verify each conductor function before finalizing connections, especially when tying into existing instrument wiring.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable makes sense for skippers who keep a handheld mounted at the helm for backup navigation, small-boat charting, or cockpit reference and want it powered whenever the boat is on. It also fits setups where sharing basic GPS data over a simple serial link is preferred over adding a full network backbone.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, check that the cable is secured every few inches and that no section can rub on fiberglass, aluminum edges, or fasteners. Periodically inspect terminations for corrosion, and re-seal any splices that show greening or moisture intrusion.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554875736310,"sku":"APL514682","price":27.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694050_apl514682_jpeg.jpg?v=1787845457"},{"product_id":"apl959077","title":"Simrad WM-4 Sirius Satellite Weather Installation Kit, SMA Adapter, Mounting Screws","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-14974-001 is a WM-4 installation kit with mounting hardware and an SMA adapter that connects the WM-4 antenna to the WM-4 Satellite Interface.\u003c\/p\u003e\u003cp\u003eThis is the small set of parts you reach for during a new WM-4 install, a module swap, or a refit where the original antenna adapter or fasteners are missing. It keeps the antenna connection correct at the receiver side and helps secure the WM-4 components so they stay put when the boat is moving.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Simrad WM-4 Sirius satellite weather systems\u003c\/li\u003e\n\u003cli\u003eSMA adapter for the WM-4 antenna connection to the WM-4 Satellite Interface\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware used during WM-4 installation and service work\u003c\/li\u003e\n\u003cli\u003eUseful for clean re-installs after console work, electronics upgrades, or troubleshooting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSMA adapter for the WM-4 antenna connection\u003c\/li\u003e\n\u003cli\u003eMounting screws and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis kit is specific to the WM-4 system and the way the WM-4 antenna connects to the WM-4 Satellite Interface. If your boat uses a different Sirius receiver or a different antenna connector style, this is unlikely to be the right adapter.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSupport the antenna lead so the SMA connection is not carrying the weight of the cable run. Keep bends gentle and avoid routing where the cable can be stepped on, pinched by a hatch, or tugged when you pull electronics out for service.\u003c\/p\u003e\u003cp\u003eStart SMA threads by hand to avoid cross-threading, then snug the connection. Placing the connection inside a dry console or electronics compartment helps reduce intermittent issues caused by moisture and vibration.\u003c\/p\u003e\u003ch6\u003eWho this is for\u003c\/h6\u003e\u003cp\u003eThis kit makes sense for boaters running a WM-4 receiver who are installing the system for the first time or putting one back together after a dash rebuild. It is also a practical fix when the original WM-4 antenna adapter or mounting screws have gone missing during service.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":51554888417526,"sku":"APL959077","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0837011_apl959077.jpg?v=1787846057"},{"product_id":"apl013276","title":"Garmin Vehicle Power Cable, 12V Cigarette Lighter, For nüvi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10747-03 is a 12-volt adapter cable that powers compatible Garmin nuvi GPS units from a cigarette-lighter style accessory socket. It is a practical way to keep a nuvi running at the helm when you are using an automotive-style GPS as a backup navigator on a boat with a 12V outlet.\u003c\/p\u003e\u003cp\u003eThe cable run is approximately 1.5 meters, which is usually enough to reach from a dash outlet to a windshield-style mount or a small bracket at the console. On supported nuvi models, this lead connects to the power cradle (mount) rather than plugging into the GPS itself, and it is power-only with no built-in traffic receiver function.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePlugs into a standard 12V DC cigarette-lighter style accessory receptacle\u003c\/li\u003e\n\u003cli\u003eApproximately 1.5 m cable length for flexible routing at the dash or helm\u003c\/li\u003e\n\u003cli\u003eDesigned to feed power through the mounting cradle on compatible nuvi mounts\u003c\/li\u003e\n\u003cli\u003ePower-only lead that does not add TMC traffic receiver capability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adapter cable is used with Garmin nuvi models that take vehicle power through a powered cradle. Confirm that your mount has the side power input used by the nuvi 600 series (600, 610, 650, 660, 670, 680, including “T” and “FM” variants) and the nuvi 700 series (700, 710, 750, 755, 760, 765, 770, 775, 780, 785, including “T” variants).\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlug the accessory end into a 12V outlet, then connect the other end to the power input on the nuvi mounting cradle. Route the cable so it stays clear of steering gear, throttle linkages, and sharp edges, and leave enough slack for the mount to pivot without pulling on the connector.\u003c\/p\u003e\u003cp\u003eFor open helms, treat it like any cabin electronics lead: keep the plug and connection points out of spray, avoid standing water, and secure the cable so vibration does not work it loose.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eVehicle power cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boaters who run a portable nuvi at the helm for quick routing reference or as a secondary display while the primary chartplotter handles navigation. It also works well for moving the same GPS between a tow vehicle, an RV, and the boat when you rely on a 12V accessory outlet for power.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554919153910,"sku":"APL013276","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694079_apl013276_jpeg.jpg?v=1787847116"},{"product_id":"apl229916","title":"Garmin Threaded 2-Pin Power Cable, For ECHOMAP Chartplotters, 6 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13115-02 is a 6-foot (about 1.8 m) threaded 2-pin power cable for compatible Garmin ECHOMAP chartplotters. It is the simple piece that gets power from your boat’s DC system to the unit, whether you are finishing a new helm install or replacing a cable that got pinched, corroded, or cut.\u003c\/p\u003e\u003cp\u003eThe threaded collar locks the plug in place so it is less likely to work loose from vibration or repeated trailering. The 6-foot length is a practical run for many console and helm layouts without needing an extension.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThreaded 2-pin connector for ECHOMAP chartplotters that use the matching 2-pin power port\u003c\/li\u003e\n\u003cli\u003e6-foot (about 1.8 m) overall length for clean routing from the display to the power source\u003c\/li\u003e\n\u003cli\u003eThreaded locking collar helps keep the connection tight in wet, bumpy, and high-vibration areas\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement lead or a second harness for troubleshooting and temporary setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is used with Garmin ECHOMAP chartplotters that take a threaded 2-pin power connection, including ECHOMAP UHD2 6-inch displays, ECHOMAP UHD2 7-inch SV displays, and ECHOMAP UHD2 9-inch displays. It is also used with certain ECHOMAP UHD2 and LiveScope ice fishing bundles that share the same 2-pin threaded power plug.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your display’s power port matches the 2-pin threaded style. Garmin uses several different connector families across chartplotter lines, and the plug style is the quickest way to confirm fit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable from the display location to your DC distribution point, avoiding sharp edges, pinch points, and moving steering components. At the back of the display, seat the connector fully and hand-tighten the threaded collar until it is snug.\u003c\/p\u003e\u003cp\u003eConnect the power leads to a properly fused or breaker-protected circuit that matches your chartplotter’s wiring requirements. Leave a small service loop behind the display so you can pull the unit forward for updates or troubleshooting without stressing the connector.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIn a saltwater helm, check the connector periodically for salt buildup and make sure the collar is still snug. If the plug has been exposed to spray or washdowns, a quick fresh-water rinse and dry helps keep the connection clean for the next trip.\u003c\/p\u003e\u003ch6\u003eWho this is a good match for\u003c\/h6\u003e\u003cp\u003eThis is a straightforward fit for boaters running a compatible ECHOMAP setup who want a secure, threaded power connection at the helm. It also makes sense for anyone keeping a spare cable onboard for fast swaps when a wiring issue shows up at the dock or on the trailer.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554981085430,"sku":"APL229916","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280291_apl229916.webp?v=1787848191"},{"product_id":"apl628946","title":"Garmin Marine Network Cable Coupler, 2x RJ45 Female","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10580-00 is an RJ45 network cable coupler used to join two Garmin marine network cables end-to-end when you need a longer run.\u003c\/p\u003e\u003cp\u003eIt creates a single junction point between two cable ends, which is handy when a radar, sounder module, or network switch ends up just out of reach after routing through a hardtop, console, or rigging tube. Because it is built for Garmin marine network cabling, it keeps your network extension clean without cutting or splicing the cable jackets.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eJoins two Garmin marine network cables end-to-end using RJ45 large connectors\u003c\/li\u003e\n\u003cli\u003eExtends a network run without re-pulling a longer single cable through tight chases\u003c\/li\u003e\n\u003cli\u003eKeeps factory-terminated cable ends intact, avoiding field splices in the electronics network\u003c\/li\u003e\n\u003cli\u003eUseful anywhere Garmin networked equipment needs a little more reach between connection points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis coupler is meant for Garmin marine network cables that terminate in RJ45 large connectors. Verify both cable ends match the same connector style before ordering, since this part is a straight coupler and does not adapt between connector types.\u003c\/p\u003e\u003cp\u003eIt is used on Garmin networked systems where components communicate over the Garmin marine network, such as chartplotters, fishfinders, radar, and network expansion hardware that use this cabling style.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the coupler where the two cable ends can meet without tension. Leave enough service loop to unplug the connection later, and secure the nearby cabling so vibration and movement do not work the connectors loose over time.\u003c\/p\u003e\u003cp\u003eFor best long-term reliability, place the coupler in a protected location such as behind the helm, inside a console, or in an electronics locker. If the area can see spray or washdowns, route the connection into a suitable protected enclosure rather than leaving it exposed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for boats where electronics get added over time and the original network cable run ends up slightly short, including installations that route up a tower, through a T-top, or forward into a cabin or bow compartment.\u003c\/p\u003e\u003cp\u003eIt also helps when refits require moving displays or adding a networked accessory and you want to extend the run at an accessible junction point instead of re-running the full cable path.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554988097782,"sku":"APL628946","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694129_apl628946_jpeg.jpg?v=1787848266"},{"product_id":"apl844391","title":"Garmin Quick Release Lanyard, For Rino 610\/650\/655t and GPSMAP 64","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11733-00 is a quick release lanyard that keeps a compatible handheld GPS close to you when you are moving around the boat. It hangs around your neck and uses a quick-disconnect section so you can separate the handheld from the strap without taking the lanyard off, which is handy when you need to hand the unit to a crewmate or pop it off to stow it. Shipping package weight is listed at about 1.4 oz.\u003c\/p\u003e\u003cp\u003eOn board, this is most useful for keeping a handheld within reach in the cockpit, on the foredeck, or in the dinghy where drops happen fast. It helps reduce the chances of setting your GPS down on a wet surface or watching it slide out of a pocket when the boat rocks.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eQuick-release disconnect so the handheld can be detached from the neck lanyard quickly.\u003c\/li\u003e\n\u003cli\u003eCompatible with Garmin Rino 610, Rino 650, Rino 655t, and GPSMAP 64 series handhelds.\u003c\/li\u003e\n\u003cli\u003eAlso listed as compatible with the Astro 320.\u003c\/li\u003e\n\u003cli\u003eNeck-worn carry keeps the GPS accessible when you are steering, handling lines, or climbing in and out of a tender.\u003c\/li\u003e\n\u003cli\u003eBlack\/grey colorway.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis lanyard is meant for specific Garmin handheld models, so confirm your device family before ordering. Your handheld must have a lanyard attachment point, and if you use a protective case or cover, it needs to leave that attachment point accessible so the tether can seat properly.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eAttach the tether to the handheld’s lanyard point, then wear the strap around your neck and keep the unit tucked where it will not swing into the helm, hardware, or companionway steps. Use the quick release when you want to remove the handheld for close-up viewing, to operate it from a stable seated position, or to pass it to someone else without pulling the strap over your head.\u003c\/p\u003e\u003cp\u003eAs with any neck lanyard on a boat, keep it clear of moving gear and avoid wearing it where it could snag around winches, cleats, or engine controls.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter salt spray or a wet day, rinse the lanyard with fresh water and let it dry fully before stowing. Check the strap and connector for wear over time, especially if the handheld is used often on deck or around grit and sand in a dinghy.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eQuick release lanyard\u003c\/li\u003e\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51555021226230,"sku":"APL844391","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697258_apl844391_jpeg.jpg?v=1787848389"},{"product_id":"apl455926","title":"Garmin USB-A Clip Charging\/Data Cable, For Approach Forerunner and vívomove Watches","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11029-19 is a USB-A charging and data clip cable for select Approach, Forerunner, vivomove, and Lily watches. Plug it into a computer USB port to charge your watch and transfer data, or into any powered USB outlet on board when you just need to top up.\u003c\/p\u003e\u003cp\u003eThe clip attaches to the charging contacts on the back of the watch so it stays seated while the boat is at the dock or underway. It weighs about 50 g, which makes it easy to keep as a spare in a nav-station drawer, travel kit, or ditch bag.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUSB-A plug for standard USB ports and common marine USB chargers\u003c\/li\u003e\n\u003cli\u003eSingle cable for charging and USB data transfer\u003c\/li\u003e\n\u003cli\u003eWorks with an optional AC adapter (sold separately) for wall power or onboard outlets\u003c\/li\u003e\n\u003cli\u003eBlack clip and cable that stays low-profile at the chart table or in a gear bag\u003c\/li\u003e\n\u003cli\u003eLightweight carry spares well, about 50 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCharging connectors vary between Garmin watch families. This clip fits these compatible devices: Approach G10 and Approach S20; Forerunner 30, Forerunner 35, Forerunner 230, Forerunner 235, Forerunner 630, Forerunner 645, Forerunner 645 Music, and Forerunner 735XT; vivomove HR; Lily Classic Edition; and Lily Sport Edition.\u003c\/p\u003e\u003cp\u003eIf your watch uses a different charging style, it will not seat correctly on the clip, so matching the model list matters.\u003c\/p\u003e\u003ch6\u003eCharging on board\u003c\/h6\u003e\u003cp\u003eAny powered USB-A outlet will work, including a 12 V USB panel at the helm, a cabin USB outlet, or a power bank. Charge in a dry spot and leave enough slack so the watch is not hanging by the cable when the boat moves.\u003c\/p\u003e\u003cp\u003eAfter saltwater spray, wipe the watch contacts and the clip pads with a clean dry cloth before charging. Keeping the contacts clean helps avoid intermittent charging and reduces the chance of corrosion on the small metal pads.\u003c\/p\u003e\u003ch6\u003eData transfer and everyday use\u003c\/h6\u003e\u003cp\u003eWhen connected to a computer, the same cable charges while your watch transfers data. This is useful when you are syncing activity files and then heading back out for the next day on the water.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical spare for skippers and crew who rely on a compatible Garmin watch and want a charger that can live on the boat. It also works well as a replacement when the original cable stays at home or gets lost in a gear shuffle.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51555084370166,"sku":"APL455926","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0695583_apl455926_jpeg.jpg?v=1787849537"},{"product_id":"apl983186","title":"Furuno - Touch Encoder Unit f\/NavNet TZtouch2 \u0026 TZtouch3 - Black - 3M M12 to USB Adapter Cable","description":"\u003ch4\u003eDive Deeper Into Navigation: Introducing the Touch Encoder!\u003c\/h4\u003e\n\u003cp\u003eTouch Encoder Unit for NavNet TZtouch2 \u0026amp; TZtouch3 - Black - 3M M12 to USB Adapter Cable\u003c\/p\u003e\n\u003ch4\u003eA New Wave in Navigational Control\u003c\/h4\u003e\n\u003cp\u003eExperience the ultimate fusion of style and functionality with the Touch Encoder Unit for your NavNet TZtouch2 or TZtouch3. Beyond just a control, this unit elevates the aesthetics of your dashboard and offers an armchair control like never before.\u003c\/p\u003e\n\u003ch4\u003eSpecifications That Sail Smoothly\u003c\/h4\u003e\n\u003cp\u003eBringing together the familiarity of the Edge Swipe UI and the innovation of the RotoKey™, the TEU001 ensures seamless interactions with your NavNet system. Its color LCD touchscreen not only accentuates its looks but also simplifies complex functions.\u003c\/p\u003e\n\u003cp\u003eWhether you're edge swiping, utilizing long and short press functions, zooming, or panning your charts - the encoder empowers you with comprehensive control over your NavNet TZtouch2 or TZtouch3 MFD.\u003c\/p\u003e\n\u003c!-- Insert the product dimensions here if they are available. If not, then this section will not appear. --\u003e\n\u003ch4\u003eShining Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIntuitive Edge Swipe UI integration\u003c\/li\u003e\n\u003cli\u003eInnovative RotoKey™ for tactile control\u003c\/li\u003e\n\u003cli\u003eSupports single and two-finger tap functions\u003c\/li\u003e\n\u003cli\u003eZoom, pan, and access all menu options with ease\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51555171795190,"sku":"APL983186","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697015_apl983186_jpeg.jpg?v=1787852264"},{"product_id":"apl850530","title":"JENSEN - 12V Power Adapter","description":"\u003ch4\u003eUnlock the Power: 12V Adapter Overview\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e12V Power Adapter\u003c\/strong\u003e is specially designed to power your 12 Volt DC televisions. Crafted for those who value reliable performance and efficiency.\u003c\/p\u003e\n\u003ch4\u003eProduct Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically for 12 Volt DC televisions\u003c\/li\u003e\n\u003cli\u003eReliable performance\u003c\/li\u003e\n\u003cli\u003eDesigned for uninterrupted viewing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JENSEN","offers":[{"title":"Default Title","offer_id":51555185623286,"sku":"APL850530","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697775_apl850530_jpeg.jpg?v=1787852328"},{"product_id":"apl544779","title":"Garmin echo Series Power Cable, 6 ft, 4-Pin Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11678-10 is a 6 ft (1.8 m) power cable with a 4-pin connector for Garmin echo series fishfinders.\u003c\/p\u003e\u003cp\u003eIt is a practical replacement when the original harness has been cut, pinched behind a helm panel, or the connector has suffered corrosion from moisture and washdowns. The 6 ft length also gives you room to route cleanly inside a console without putting strain on the plug at the unit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 ft (1.8 m) cable length for flexible routing from the fishfinder mount to your power feed\u003c\/li\u003e\n\u003cli\u003e4-pin connector that mates with echo series fishfinders that use the 4-pin power port\u003c\/li\u003e\n\u003cli\u003eSimple way to restore power when you are replacing a damaged or unreliable cable run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for Garmin echo series fishfinders that accept a 4-pin power connection. Before ordering, compare the connector style to your existing harness and the power socket on the back of the display or cradle.\u003c\/p\u003e\u003cp\u003eCommon matches include echo 100, 150, 200, 300c, 500c, and 550c.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable with gentle bends and support it with clamps or ties so vibration cannot pull on the connector. Leave enough slack at the mount to tilt or remove the unit for service without yanking the plug.\u003c\/p\u003e\u003cp\u003eConnect the boat end to a properly fused DC circuit and keep any terminations in a dry location behind the dash. If the cable passes through a bulkhead or rigging tube, protect it with a grommet to prevent chafe over time.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a straightforward fit for skiffs, center consoles, and small cruisers where an echo fishfinder is mounted at the helm. It is also handy to keep as a spare harness when you want a quick swap without disturbing the rest of the installation.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter heavy spray or washdowns, wipe the connector area dry and confirm the plug is fully seated. During seasonal checks, look for chafe points and replace the cable if the outer jacket shows cuts or flattened spots.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51555348447478,"sku":"APL544779","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694290_apl544779_jpeg.jpg?v=1787856178"},{"product_id":"apl611474","title":"Hydro Glow - WM10 10W\/4AA LED Handheld Gigging Light","description":"\u003ch4\u003eIlluminate Your Coastal Adventures: The WM10 10W\/4AA LED Handheld Gigging Light\u003c\/h4\u003e\n\u003cp\u003eSetting out for a flounder gigging expedition after sunset? Say goodbye to cumbersome generators and the noise they make. Welcome the era of high-powered LED lights that ensure you can navigate the coastal lagoons and beaches in absolute silence. Whether you're wading through the waters or scanning from your boat, these lights provide the perfect luminance to spot those elusive flounders.\u003c\/p\u003e\n\u003ch4\u003eDive Deeper into the Technicalities\u003c\/h4\u003e\n\u003cp\u003eThe power of this LED light emanates from its high-efficiency and high-output capabilities. Designed for endurance, you can trust this light to illuminate your path and expose the hidden treasures of the shallows.\u003c\/p\u003e\n\u003ch4\u003eInstallation - A Breeze on the Bow\u003c\/h4\u003e\n\u003cp\u003eTypical setups involve mounting multiple such lights, generally 4 to 8, around the boat's bow. Seasoned \"\"giggers\"\" often construct a platform over the bow. This not only facilitates easy movement but also becomes the perfect place to station the battery beneath. And speaking of batteries, a single, high-quality marine battery is capable of supporting 4 FL30 floodlights for an impressive duration of 6-8 hours.\u003c\/p\u003e\n\u003ch4\u003eKey Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficient and high output LEDs\u003c\/li\u003e\n\u003cli\u003eQuiet operation ensures undisturbed marine life\u003c\/li\u003e\n\u003cli\u003eConvenient mounting options\u003c\/li\u003e\n\u003cli\u003eExtended battery life for prolonged use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hydro Glow","offers":[{"title":"Default Title","offer_id":51555403890934,"sku":"APL611474","price":195.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697814_apl611474_jpeg.jpg?v=1787856963"},{"product_id":"apl561433","title":"Garmin USB Charging Clip, For Forerunner 405\/405CX\/410\/310XT\/910XT","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11029-01 is a charging clip that lets compatible Forerunner watches charge from a computer through a USB connection.\u003c\/p\u003e\u003cp\u003eIt works by clipping onto the watch to make contact at the charging points, then running to your computer with a USB cable. It is a simple spare to keep at the nav station, in a gear bag, or anywhere you top up devices between outings.\u003c\/p\u003e\u003cp\u003eCompatible with Forerunner 405, Forerunner 405CX, Forerunner 410, Forerunner 310XT, and Forerunner 910XT.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCharging clip made for Forerunner 405, 405CX, 410, 310XT, and 910XT\u003c\/li\u003e\n\u003cli\u003eClip-on connection that holds the watch in place while it charges\u003c\/li\u003e\n\u003cli\u003eUses a USB connection to a computer for charging\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement clip when the original is lost or worn\u003c\/li\u003e\n\u003cli\u003eSmall accessory that is easy to stow in a dry drawer, electronics pouch, or onboard kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAlign the clip with the back of the watch so the contacts line up, then press until it seats evenly. If it does not sit flat, remove it and realign rather than forcing it.\u003c\/p\u003e\u003cp\u003eConnect the clip to your computer using a USB cable, then allow the watch to charge. On a boat, keep the connection point out of spray and away from wet hands, and let the watch dry before charging after deck work or heavy weather.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis clip is specific to the Forerunner models listed in the Overview. It will not latch correctly on other Garmin wearables that use a different contact layout or case shape.\u003c\/p\u003e\u003cp\u003eIf you are unsure which Forerunner you have, confirm the model on the watch before ordering so the clip mates cleanly with the charging contacts.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the contact area clean so charging stays consistent. If the clip is exposed to salt air or spray, wipe it down and make sure everything is dry before connecting to any USB power.\u003c\/p\u003e\u003cp\u003eStore it where the clip arms are not being crushed by heavy gear, and avoid leaving it connected in a spot where vibration can tug on the cable.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51555541090550,"sku":"APL561433","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694116_apl561433_jpeg.jpg?v=1787859654"},{"product_id":"apl586292","title":"Garmin 12-Pin Transducer Adapter Cable, For Black Box Sonar, Right-Angle Connector, 0.6 m (23.6 in)","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12098-00 is a 12-pin transducer adapter cable with a right-angle connector, made for Garmin sonar installs where a straight plug is hard to fit behind the helm or inside an electronics box. The cable length is 0.6 m (23.6 in), which adds a small service loop without leaving a long coil to manage.\u003c\/p\u003e\u003cp\u003eThis is typically used as a replacement cable or as a short adapter at the sounder end so the transducer lead can be routed with less stress at the connector. It is a simple connection part, so the main fit check is that your system uses the Garmin 12-pin transducer connection and you have clearance for the right-angle plug.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-pin transducer connection for compatible Garmin sonar and transducer leads\u003c\/li\u003e\n\u003cli\u003eRight-angle plug helps when the sounder is mounted close to a bulkhead, dash, or bracket\u003c\/li\u003e\n\u003cli\u003e0.6 m (23.6 in) cable length for a tidy run with a little slack for service access\u003c\/li\u003e\n\u003cli\u003eUseful as a replacement or as a strain-relief adapter at the connector end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm your sonar module or chartplotter uses the Garmin 12-pin transducer port and that the transducer lead you are connecting is the same 12-pin style. If your setup uses a different connector format, this cable will not mate correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003ePlan the cable path so it is supported and does not hang from the connector. Keep the run away from sharp fiberglass edges and moving hardware, and leave enough bend radius so the cable is not forced into a tight kink in the console or rigging tube. For best long-term results in a saltwater environment, keep the connection point as dry as practical and make sure the plug is fully seated and secured.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boats with tight electronics spaces, such as center consoles, bass boats with crowded bow panels, and enclosed helms where a straight transducer plug would press into the back of the mounting surface. It also helps on trailer boats where vibration and repeated access behind the dash can work a cable against the connector if there is no slack.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51555587490038,"sku":"APL586292","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694461_apl586292_jpeg.jpg?v=1787860491"},{"product_id":"apl754770","title":"Garmin ECU Power Cable, For GHP 12 \u0026 GHP 20, Threaded Collar, 2.5m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11057-30 is an electronic control unit (ECU) power cable with a threaded-collar connector used to power a Garmin autopilot ECU during a GHP installation.\u003c\/p\u003e\u003cp\u003eIt runs from your boat’s battery or DC distribution to the ECU and gives you 2.5 m of length to route cleanly through lockers, consoles, or an equipment bay without putting tension on the connector.\u003c\/p\u003e\u003cp\u003eThis cable is intended for the Garmin GHP 12 Autopilot System and the Garmin GHP 20 Marine Autopilot System with SmartPump, where the ECU uses a threaded power connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2.5 m cable length for practical routing from the DC source to the ECU.\u003c\/li\u003e\n\u003cli\u003eThreaded-collar ECU connector to help keep the power connection tight after installation.\u003c\/li\u003e\n\u003cli\u003eUsed as the battery-to-ECU power lead during Garmin GHP 12 and GHP 20 (with SmartPump) autopilot installs.\u003c\/li\u003e\n\u003cli\u003eUseful for replacements when the original power lead has been shortened, damaged, or removed during a refit.\u003c\/li\u003e\n\u003cli\u003eSupports clean rigging by letting you route the cable first and make the final ECU connection at the end.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm your autopilot system is a GHP 12 or a GHP 20 with SmartPump and that the ECU power port matches a threaded-collar plug. If your existing harness uses a different connector style, this cable will not seat correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable where it will stay protected from chafe. Use grommets through bulkheads, keep it clear of sharp edges, and leave a small service loop at the ECU so the connector is not carrying the cable’s weight.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect the supply end to a clean DC feed from the battery or distribution panel and protect the circuit with the fuse or breaker value specified for your autopilot system. Verify polarity before powering up, and avoid sharing the feed with high-current loads that can introduce voltage drop.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a practical match for new autopilot installs and for troubleshooting intermittent ECU power by swapping in a known-good power lead. It also suits boats where the ECU is mounted in a console, under a berth, or in an equipment locker and a full-length lead is needed to reach the DC source without splices.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few outings, recheck cable routing and the threaded collar to make sure nothing has loosened. Inspect the run seasonally for abrasion points and resecure or replace the cable if the jacket shows wear.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51555669901558,"sku":"APL754770","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694153_apl754770_jpeg.jpg?v=1787861674"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-handheld-gps-cables-adapters.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}