{"title":"Marine Switches","description":"","products":[{"product_id":"apl621763","title":"Vimar Idea 2-Way Switch, 1P, 10 AX, 250 V, 3 Terminals, Central OFF Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16140 is a modular 1-pole 2-way switch for flush-mounted Vimar IDEA installations where you need directional control from one rocker. It uses a 3-terminal layout with directional arrows and a central OFF position, is rated 10 AX at 250 V~, and carries IP40 protection for interior locations.\u003c\/p\u003e\u003cp\u003eOn a boat, this switch fits best in enclosed cabin panels, protected helm stations, and other built-in control points that stay clear of direct spray. The body is made from halogen-free thermoplastic with a matte untreated surface, and it installs with snap fastening in the supporting frame.\u003c\/p\u003e\u003cp\u003eIt also includes a label surface for circuit identification and runs as a non-illuminated switch with no monitoring contact. For self-ballasted lamp loads, the published limit is 100 W.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole 2-way switch with 3 terminals, directional arrows, and a central OFF position\u003c\/li\u003e\n\u003cli\u003e10 AX at 250 V~ for AC switching duties within the stated rating\u003c\/li\u003e\n\u003cli\u003eBuilt-in module with snap fastening for Vimar IDEA flush-mount assemblies\u003c\/li\u003e\n\u003cli\u003eIP40 protection for covered interior panels and other sheltered mounting points\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte surface finish\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit marking and easier panel identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same IDEA switching format.\u003c\/p\u003e\u003cp\u003eAcross both variants, the switching layout stays the same: 1-pole, 10 AX, 250 V~, 3 terminals, central OFF position, built-in snap mounting, and IP40 protection. The visible difference between them is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16140.B: Color Ivory. This version keeps a lighter look on panels and trim where a pale switch finish is preferred.\u003c\/li\u003e\n\u003cli\u003eVM16140: Color Gray. This version suits panels that already use the gray IDEA device color.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis switch is part of the Vimar IDEA series, so it is intended for IDEA-compatible mounting frames, supports, and cover plates. The single-rocker format makes it a straightforward replacement when the rest of the installation already uses the same modular family.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners and installers who need a center-off directional switch in a cabin or enclosed helm panel without changing to a different device range.\u003c\/p\u003e\u003ch6\u003eElectrical and placement\u003c\/h6\u003e\u003cp\u003eThe confirmed rating is for AC service at 250 V~ and 10 AX. For onboard use, that makes it better suited to cabin and helm switching points that stay sheltered, rather than exposed deck locations or washdown areas. IP40 is appropriate where the switch is protected from direct water exposure.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550269767926,"sku":"APL621763-V8","price":29.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550269800694,"sku":"APL621763-V0","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364173_apl013685_jpeg.jpg?v=1787789373"},{"product_id":"apl208483","title":"BEP 3-Position SPDT Push-Pull Switch - OFF\/ON1\/ON1 \u0026 2 1001301","description":"\u003cp\u003e\u003cstrong\u003e3-Position SPDT Push-Pull Switch - OFF\/ON1\/ON1 \u0026amp; 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, double throw switch turns on position 1 or position 1 and 2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty, noncorrosive construction with moisture-repellent insulators\u003c\/li\u003e\n\u003cli\u003eBrass case, stem, terminals and mounting hardware\u003c\/li\u003e\n\u003cli\u003eAll knobs are screw-on type\u003c\/li\u003e\n\u003cli\u003eNominal voltage is 6-36V DC.\u003c\/li\u003e\n\u003cli\u003eRated for 10A at 12V DC\u003c\/li\u003e\n\u003cli\u003e#8-36 screw terminals\u003c\/li\u003e\n\u003cli\u003eFits panels up to 1\" thick\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number M-476\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550277140726,"sku":"APL208483","price":23.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1095149_apl208483jpg.jpg?v=1787789473"},{"product_id":"apl705215","title":"Vimar Idea IP55 2-Module Surface-Mount Enclosure, For 8000 Special Modules, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13523 is an IP55 surface-mount enclosure for two Vimar Idea modules or two 8000 special modules, used to keep modular switches and outlets protected in splash-prone areas on a boat.\u003c\/p\u003e\u003cp\u003eIt is finished in RAL 7035 grey and comes with two 08491 adaptors for fitting 8000 standard modules. The body is plastic with insulating fill, which suits mounting on insulated panels and helps avoid exposed conductive surfaces around the module area.\u003c\/p\u003e\u003cp\u003eFor fit checks, the enclosure is rated for devices up to 68 mm wide, 83 mm high, and 65 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 protection for locations that see spray and dust, such as cockpits, flybridges, and utility areas\u003c\/li\u003e\n\u003cli\u003eSurface-mount box for adding a 2-module station without cutting a recessed mounting cavity\u003c\/li\u003e\n\u003cli\u003eCompatible with 2 Idea modules or 2 8000 special modules\u003c\/li\u003e\n\u003cli\u003eIncludes two 08491 adaptors to accept 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey housing for a clean, consistent look with common electrical enclosures on board\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with insulating fill for use on insulated bulkheads and panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 enclosure in RAL 7035 grey\u003c\/li\u003e\n\u003cli\u003e2 x 08491 adaptors for 8000 standard modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount on a flat, solid surface with room to access the modules and wiring. In exposed spots, route wiring with a drip loop before it enters the box and seal cable entries with appropriate glands or boots so the IP55 protection is maintained.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is for Vimar Idea modular devices and the 8000 special module footprint. Confirm your devices are 2-module width and stay within the maximum device size so terminals and cable bends do not interfere with closing the enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is commonly used for protected switch points for deck lighting, pumps, and small accessories near companionways, helm stations, wet lockers, and equipment spaces. It suits boats where electrical gear is exposed to occasional spray or washdown, rather than continuous immersion.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550277894390,"sku":"APL705215","price":11.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353487_apl705215_jpeg.jpg?v=1787789532"},{"product_id":"apl557363","title":"Vimar Eikon 20021 Interchangeable 1-Module Rocker Button Cover, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20021 is a 1-module interchangeable rocker button cover that can be lighted, used to finish a matching Eikon switch or push-button control on board.\u003c\/p\u003e\u003cp\u003eIt mounts with a clamp fit and includes a monitoring window\/light outlet, so a status light or locator light can show through when the underlying mechanism supports it. The IP40 rating makes it a good fit for protected interior panels rather than areas exposed to spray, washdowns, or deck weather.\u003c\/p\u003e\u003cp\u003eIn grey, the color matches RAL 7024 (similar) with a matt, untreated surface. The button is made from halogen-free thermoplastic, which suits typical cabin and helm installations where vibration and daily use are common.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module rocker button cover for the Vimar Eikon system\u003c\/li\u003e\n\u003cli\u003eLightable format with monitoring window\/light outlet for visible indication\u003c\/li\u003e\n\u003cli\u003eClamp mounting for a secure fit on the compatible mechanism\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for interior switch panels and dry technical spaces\u003c\/li\u003e\n\u003cli\u003eOffered in multiple colors and symbol markings to match the panel layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis button cover is available in three color finishes: grey, silver, and white.\u003c\/p\u003e\u003cp\u003eSymbol options include Standard (no marking), Bell, Light, O\/I, and Key. The symbol choice is used to match the function on a multi-switch panel, so circuits stay recognizable at a glance.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a control element cover, not a complete switch by itself. It is intended to be paired with the compatible 1-module Eikon mechanism and the matching Eikon mounting frame and cover plate system already installed on the boat.\u003c\/p\u003e\u003cp\u003eIf you are mixing finishes on the same panel, confirm the series is Eikon across frames and plates so module sizes and clip points line up correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is typically a front-fit clamp onto the mechanism after wiring is complete and power is isolated. Check that the rocker pivots freely and that the monitoring window aligns with any indicator or illumination point behind it.\u003c\/p\u003e\u003cp\u003eWhen used in a helm or cabin switch bank, place it where it stays out of direct spray and where routine cleaning will not force water into the mechanism area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of rocker cover is commonly used for cabin lighting, courtesy lights, freshwater pump control, electronics master switching, and other circuits that benefit from clear panel labeling. Symbol versions are especially helpful on boats with multiple identical modules in a tight switch row.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where the boat already uses Vimar Eikon modules and you want consistent markings and finishes across a new or expanded switch panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild cleaner. Avoid solvent-based products that can haze plastic surfaces. If the area sees frequent condensation, keep the panel ventilated and address any moisture at the mechanism level rather than relying on the button cover for sealing.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Standard","offer_id":51550278156534,"sku":"APL557363-V6","price":4.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Key","offer_id":51550278189302,"sku":"APL557363-V98","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I","offer_id":51550278222070,"sku":"APL557363-V32","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ O\/I","offer_id":51550278254838,"sku":"APL557363-V47","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Grey \/ O\/I","offer_id":51550278287606,"sku":"APL557363-V1","price":4.05,"currency_code":"USD","in_stock":true},{"title":"White \/ Key","offer_id":51550278320374,"sku":"APL557363-V30","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Key","offer_id":51550278353142,"sku":"APL557363-V05","price":4.85,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Light","offer_id":51550278385910,"sku":"APL557363-V0","price":5.04,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Standard","offer_id":51550278418678,"sku":"APL557363-V9","price":3.9,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Bell","offer_id":51550278451446,"sku":"APL557363-V4","price":4.21,"currency_code":"USD","in_stock":false},{"title":"White \/ Standard","offer_id":51550278484214,"sku":"APL557363-V3","price":3.9,"currency_code":"USD","in_stock":true},{"title":"White \/ Light","offer_id":51550278516982,"sku":"APL557363-V2","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Light","offer_id":51550278549750,"sku":"APL557363-V7","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Bell","offer_id":51550278582518,"sku":"APL557363-V5","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ Bell","offer_id":51550278615286,"sku":"APL557363-V8","price":4.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363282_apl557363_jpeg.jpg?v=1787789539"},{"product_id":"apl619452","title":"Vimar Idea 17086 1-Module Mounting Frame, For 60 mm or 56x56 mm Flush Boxes, For 09971 Surface Boxes, Smooth Front, Without Screws, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 17086 is a 1-module mounting frame with a smooth front and no visible fixing screws, made for round or square flush mounting boxes with 60 mm fixing centres and 56x56 mm boxes, as well as 09971 surface mounting boxes.\u003c\/p\u003e\u003cp\u003eOn board it is used to seat a single Vimar IDEA modular device cleanly in a bulkhead or panel, keeping the front tidy around lighting and accessory controls in cabins, heads, and helm stations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module frame for Vimar IDEA modular wiring devices\u003c\/li\u003e\n\u003cli\u003eSmooth front with no visible fixing screws once the cover plate is fitted\u003c\/li\u003e\n\u003cli\u003eFits round or square flush boxes with 60 mm fixing centres and 56x56 mm flush boxes\u003c\/li\u003e\n\u003cli\u003eCompatible with 09971 surface mounting boxes\u003c\/li\u003e\n\u003cli\u003eThermoplastic body suited to interior marine panels and trim\u003c\/li\u003e\n\u003cli\u003eModule inserts mount from the back side and can be oriented horizontally or vertically\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis mounting frame is offered in two colour configurations to match different IDEA finishes.\u003c\/p\u003e\u003cp\u003eColour changes between variants; the 1-module format and box compatibility stay the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM17086.B: Color Ivory. A light finish that blends with white or light trim around switches and outlets.\u003c\/li\u003e\n\u003cli\u003eVM17086: Color Gray. A neutral finish that matches gray plates and tends to hide handling marks in high-touch areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConfirm your box type and fixing centres before cutting or drilling. This frame is intended for 60 mm centre spacing and also works with 56x56 mm flush boxes, plus the 09971 surface box. The frame fastens to the box, then the 1-module device is secured from the rear and finished with the matching cover plate.\u003c\/p\u003e\u003cp\u003eWhen installing on a boat, use a backing plate or a firm panel surface so the frame stays flat. That helps the cover plate sit evenly and avoids movement when the panel flexes underway.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush-mount frame, not a floor box accessory and not a DIN-rail mounting part. It is intended for the Vimar IDEA modular system, so match the frame, device, and cover plate within the same family and in a 1-module format.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550278811894,"sku":"APL619452-V6","price":3.55,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550278844662,"sku":"APL619452-V5","price":3.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364893_apl619452_jpeg.jpg?v=1787789575"},{"product_id":"apl305610","title":"Vimar Flush Mounting Box, 60 mm, For Masonry Walls, Halogen-Free Plastic, 50 mm Inner Depth, 20\/25 mm Conduit, 5 Inlets","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar flush mounting box ø 60mm is a round flush-mounted box for masonry-wall installations, with a 60 mm diameter, 50 mm inner depth, five inlets, and rear entry for 20\/25 mm conduit. It is made from halogen-free plastic and uses break-out openings for pipe entry.\u003c\/p\u003e\u003cp\u003eIt works as the rough-in box behind flush-mounted electrical devices where space, conduit routing, and box depth need to be checked before closing the wall. The housing is couplable for side-by-side layouts, carries an IP00 rating, and accepts anti-mortar and decorative covers when those accessories are part of the installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 mm round body with 50 mm inner depth for flush mounting in masonry walls\u003c\/li\u003e\n\u003cli\u003eFive inlets plus rear entry, with break-out openings for 20\/25 mm conduit\u003c\/li\u003e\n\u003cli\u003eCouplable housing for aligned multi-box layouts\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with IP00 protection for enclosed installations behind the finished device\u003c\/li\u003e\n\u003cli\u003eAvailable in two versions that change color and glow-wire rating: light blue at 650 °C and black at 960 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that share the same round 60 mm format and flush-mounted construction.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the box color and glow-wire rating. Diameter, inner depth, five-inlet layout, rear entry, 20\/25 mm conduit compatibility, couplable body, halogen-free plastic construction, and IP00 protection remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMV71001: light blue version with a 650 °C glow-wire rating. It keeps the same box size and conduit entry format as the other version.\u003c\/li\u003e\n\u003cli\u003eVMV71001.AU: black version with a 960 °C glow-wire rating. It uses the same flush-mounted form factor and accessory compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis box is made for flush mounting in masonry walls, so the wall build and available depth should be checked before ordering. It is not a hollow-wall box and it is not a surface-mount enclosure.\u003c\/p\u003e\u003cp\u003eFor boat projects, that usually limits it to protected interior work where the structure accepts this style of flush box and the final device or trim covers the open front. Because the housing is IP00, it should stay out of exposed spray areas and any location that depends on the box itself for water protection.\u003c\/p\u003e\u003ch6\u003eAccessories and finishing\u003c\/h6\u003e\u003cp\u003eAnti-mortar covers and decorative covers are available for this box. That is useful when rough-in happens before final trim-out or when the finished installation needs a matching cover once wiring is complete.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box suits interior electrical refit work where a 60 mm flush box is already part of the plan and where conduit entry from the rear or side knockouts matters. It is a practical match for installers who need to keep the same opening size across the range while selecting between two glow-wire ratings.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Glow Wire 650\/Light Blue","offer_id":51550281367798,"sku":"APL305610-2","price":0.65,"currency_code":"USD","in_stock":true},{"title":"Glow Wire 960\/Black","offer_id":51550281400566,"sku":"APL305610-0","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827974_apl305610.jpg?v=1787789660"},{"product_id":"apl990574","title":"BEP Marine - 701MD Motorized Mini Battery Switch - 275 Amp Continuous","description":"\u003ch4\u003eEfficient and Reliable Battery Switching for Marine Applications\u003c\/h4\u003e\u003cp\u003eThe BEP Marine 701MD Mini Battery Switch is designed for high-performance marine electrical systems, ensuring safe and efficient battery management. This motorized switch allows remote operation, reducing cable length requirements and optimizing power distribution. By placing the switch close to the battery, users can significantly cut down on installation labor and copper cable costs. Ideal for remote isolation of bow thrusters and starter motors, this switch enhances convenience and reliability.\u003c\/p\u003e\u003ch4\u003eKey Features for Enhanced Performance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Operation\u003c\/strong\u003e: Easily control the battery switch from a distance for added convenience and safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Installation\u003c\/strong\u003e: Mounts close to the battery, reducing the need for long, expensive copper cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Override\u003c\/strong\u003e: Meets CE requirements with a manual override option for emergency situations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Status Indicator\u003c\/strong\u003e: Provides clear status identification for remote control operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal Power Draw\u003c\/strong\u003e: Efficient energy consumption, drawing only 12mA when off and 15mA when on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Capacity Performance\u003c\/strong\u003e: Maintains the same specifications and mounting options as other BEP Marine battery switches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous Current Rating\u003c\/strong\u003e: 275 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntermittent Current Rating\u003c\/strong\u003e: 455 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCranking Current Rating\u003c\/strong\u003e: 1250 Amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Compatibility\u003c\/strong\u003e: 9.5V - 32V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctionality\u003c\/strong\u003e: On\/Off operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStud Size\u003c\/strong\u003e: 2 x (10mm \/ 3\/8\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 2.7\" x 2.7\" x 4\"\u003c\/li\u003e\u003c\/ul\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550288478454,"sku":"APL990574","price":283.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834232_apl990574.jpg?v=1787789844"},{"product_id":"apl853774","title":"Vimar Incandescent Lamp, 24V, 3W, 7x31mm, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07055 is a 24 V, 3 W incandescent festoon lamp in the 7 mm by 31 mm format for small onboard illumination points and indicator modules that use this lamp size.\u003c\/p\u003e\u003cp\u003eIt produces white light and fits holders that accept a 31 mm festoon with a lamp body around 8 mm by 15 mm, which matters when the lamp sits behind a tight lens or switch window. This is a straightforward replacement part for keeping compatible controls and small fixtures readable on 24 V DC systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 V, 3 W incandescent lamp for 24 V DC circuits\u003c\/li\u003e\n\u003cli\u003eFestoon size: 7 mm diameter and 31 mm length\u003c\/li\u003e\n\u003cli\u003eLamp body section around 8 mm by 15 mm for clearance behind lenses and caps\u003c\/li\u003e\n\u003cli\u003eWhite light output for indicator windows and small task points\u003c\/li\u003e\n\u003cli\u003eIncandescent lamp works on DC without polarity sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the lamp type and size to what is already installed. Festoon holders vary by length, and a few millimeters can decide whether the end contacts seat properly and whether the cover closes without pressure on the glass.\u003c\/p\u003e\u003cp\u003eConfirm the holder supports the 31 mm festoon length and that the lamp body clears any diffuser, lens, or switch window. If the old lamp shows heat marks on the lens, check there is enough clearance and ventilation before fitting the new one.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis lamp is for nominal 24 V systems. On 12 V it will glow weakly; on higher voltage it will have a short life and can overheat the fixture.\u003c\/p\u003e\u003cp\u003eAt 24 V and 3 W, current draw is about 0.13 A. Make sure the circuit and contacts are clean and snug so vibration does not cause flicker.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTurn off power at the panel and let the fixture cool before handling the lamp. Remove the cover or module window as required, then lift the festoon out of its spring contacts and seat the new lamp evenly so both ends are fully engaged.\u003c\/p\u003e\u003cp\u003eAfter reinstalling the lens or cover, power the circuit back up and check for steady light. If it flickers underway, the holder contacts usually need cleaning or a slight re-tensioning.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lamp makes sense on boats and yachts that run 24 V DC and use small indicator lights in switch panels, control stations, or compact interior fixtures where the 7 x 31 mm festoon format is used. It is also a good match when you want the same look and output as the original incandescent lamp rather than switching the fixture to LED.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSalt air and humidity can leave a film on contacts over time. If a lamp change does not restore steady operation, clean the end contacts and the holder springs, and inspect for heat-darkened lenses that can reduce visibility.\u003c\/p\u003e\u003cp\u003eKeeping a spare on board helps for panel indicators and small utility lights, especially on offshore runs where a quick swap is easier than troubleshooting a dim or intermittent lamp at night.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550293852406,"sku":"APL853774","price":6.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826816_apl-npj-xsa-fdx.jpg?v=1787789999"},{"product_id":"apl229720","title":"Cole Hersee - Push Pull Switch SPST Off-On","description":"\u003ch4\u003eSeamless Switching at Sea: Push Pull Switches for Marine Excellence\u003c\/h4\u003e\n\u003cp\u003eDiscover the pinnacle of nautical control with our Push Pull Switch collection, specifically designed to meet the rigorous demands of marine environments. Whether you're navigating the open ocean or docking at a serene marina, these switches offer unparalleled reliability and ease. Crafted for seamless integration into your vessel's electrical system, our Push Pull Switches ensure a smooth sailing experience, enhancing both safety and functionality aboard.\u003c\/p\u003e\n\u003ch4\u003eEffortless Operation with Durable Design\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSimple push-pull mechanism for easy on-off control\u003c\/li\u003e\n\u003cli\u003eSPST (Single Pole Single Throw) configuration, ensuring straightforward electrical connectivity\u003c\/li\u003e\n\u003cli\u003eRobust brass construction for long-lasting durability against harsh marine conditions\u003c\/li\u003e\n\u003cli\u003eVariants with PVC-coated brass cases for additional protection\u003c\/li\u003e\n\u003cli\u003eChrome brass actuator knob for a touch of elegance and extra corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFlexible voltage compatibility ranging from 6 to 36VDC, accommodating a wide array of marine electrical systems\u003c\/li\u003e\n\u003cli\u003eHigh current rating of 10A at 12VDC, capable of handling significant loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdaptable Dimensions for Every Deck\u003c\/h4\u003e\n\u003cp\u003eWith a standardized size of 3\/8\"-32 and a length of 1-1\/4\", our Push Pull Switches are designed to fit effortlessly into your vessel's control panel, ensuring a sleek and unobtrusive installation.\u003c\/p\u003e\n\u003ch4\u003eVibrant Varieties for Vessel Versatility\u003c\/h4\u003e\n\u003cp\u003eOur collection features several variations to cater to diverse maritime needs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Screw Terminal\u003c\/strong\u003e: Ideal for simple installations, featuring a sturdy brass case for straightforward operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Wire\u003c\/strong\u003e: Equipped with PVC-coated brass for enhanced environmental protection, suitable for vessels requiring extra durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Screw Terminal\u003c\/strong\u003e: Offers an upgraded configuration for more complex systems, including a chrome brass knob and three screw terminals for secure connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach variation is meticulously designed to provide reliable performance in the demanding marine setting, ensuring that you can focus on the journey ahead with confidence.\u003c\/p\u003e\n\u003ch4\u003eChart Your Course with Confidence\u003c\/h4\u003e\n\u003cp\u003eEmbrace the horizon with our Push Pull Switches, where durability meets functionality. Tailored for the sea, these switches are your steadfast companions on every maritime adventure, ensuring a seamless and secure connection to your vessel's essentials. Choose the variant that best suits your nautical needs and sail towards excellence with unwavering control.\u003c\/p\u003e","brand":"Cole Hersee","offers":[{"title":"2 Screw","offer_id":51550298210550,"sku":"APL229720-V9","price":25.99,"currency_code":"USD","in_stock":false},{"title":"3 Screw","offer_id":51550298243318,"sku":"APL229720-V7","price":28.99,"currency_code":"USD","in_stock":false},{"title":"2 Wire","offer_id":51550298276086,"sku":"APL229720-V1","price":30.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0705283_apl229720.jpg?v=1787790220"},{"product_id":"apl939346","title":"Pacer Actuator - 'NAVIGATION' f\/V Series Contura Switches - Black - Laser Etched (Top\/Bottom Light) EV2LE-NAV","description":"\u003cp\u003e\u003cstrong\u003eActuator - 'NAVIGATION' for V Series Contura Switches - Black - Laser Etched (Top\/Bottom Light)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLaser-etched switch covers are the highest level of quality that you can achieve. They offer a clean, crisp look that has to be seen to be believed. With laser precision, our switch covers offer a flawless finish you simply cannot match with other methods. Many of the etched switch covers we offer are available in either single or dual-light formats. This means that users can get the type you need to match the look they want. With laser-etched switch covers, users get a permanent marking solution that will not chip, peel, or fade over time. Pacer currently offers over 225 options of etched switch covers. Choosing the right etched switch cover is not an easy task. Contact a Pacer expert today with any questions that you may have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA permanent marking solution\u003c\/li\u003e\n\u003cli\u003eFits V Series Contura switches\u003c\/li\u003e\n\u003cli\u003eResistant to UV exposure\u003c\/li\u003e\n\u003cli\u003eEasy to install\u003c\/li\u003e\n\u003cli\u003eLow light visibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of Bulbs: Two lenses\u003c\/li\u003e\n\u003cli\u003eEtched Symbol: NAVIGATION\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Sold as an individual\u003c\/p\u003e","brand":"Pacer Group","offers":[{"title":"Default Title","offer_id":51550298374390,"sku":"APL939346","price":16.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1101262_apl939346jpg.jpg?v=1787790229"},{"product_id":"apl610607","title":"HEISE LED Lighting Systems - Wireless Remote Control \u0026 Relay Harness","description":"\u003ch4\u003eIlluminate Your Marine Experience: HEISE Wireless Remote Control \u0026amp; Relay Harness\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eHEISE Wireless Remote Control \u0026amp; Relay Harness\u003c\/strong\u003e, a groundbreaking solution from the forefront of the lighting industry. This wireless RF remote control and relay harness set the standard for remote-controlled illumination on any marine vessel. Designed for simplicity and ease of use, the HE-WRRK allows you to operate your HEISE LED light bar, driving light, or work light with just a touch of a button, eliminating the need to run wires inside your vehicle.\u003c\/p\u003e\n\u003ch4\u003eEffortless Operation and Installation\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWireless control over your lighting with nine different flash options for versatile signaling and illumination.\u003c\/li\u003e\n\u003cli\u003e9-foot harness length provides ample reach for various installation needs.\u003c\/li\u003e\n\u003cli\u003eDirect 2-wire connection to the battery, bypassing the need for extensive wiring through the vehicle's interior.\u003c\/li\u003e\n\u003cli\u003eCompatible with any single HEISE LED light bar, driving light, or work light for tailored lighting setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eExpand Your Lighting System\u003c\/h4\u003e\n\u003cp\u003eLooking to add another light bar? The optional HE-EYHK (Y ADAPTER HARNESS KIT) is available for purchase, allowing you to connect two HEISE light bars, driving lights, or work lights, each 150 watts or less, to be controlled seamlessly with the HE-WRRK system.\u003c\/p\u003e\n\u003ch4\u003eWhat’s Included in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) Remote Control Receiver for receiving signals from the remote.\u003c\/li\u003e\n\u003cli\u003eOne (1) Battery Operated FOB for easy control from a distance.\u003c\/li\u003e\n\u003cli\u003eOne (1) Extension to ensure optimal placement.\u003c\/li\u003e\n\u003cli\u003eOne (1) Adapter for connecting additional lighting units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTransform your marine lighting experience with the \u003cstrong\u003eHEISE Wireless Remote Control \u0026amp; Relay Harness\u003c\/strong\u003e. Offering unmatched convenience and flexibility, this kit not only enhances the functionality of your lighting setup but also promotes a safer, more enjoyable marine adventure, all controlled from the palm of your hand.\u003c\/p\u003e","brand":"HEISE LED Lighting Systems","offers":[{"title":"Default Title","offer_id":51550306435318,"sku":"APL610607","price":136.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0706278_apl610607.jpg?v=1787790416"},{"product_id":"apl600575","title":"Vimar Arke Axial 1-Way Switch, Single Pole, 16AX, 250V AC, Illuminable, 2-Module, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM19101 is a 1-pole, 1-way axial switch mechanism for the Arké modular system, rated 16 AX at 250 V~ and suitable for loads up to 200 W for self-ballasted lamps.\u003c\/p\u003e\u003cp\u003eIt takes up two modules in a Vimar Arké frame and sits behind your chosen cover plate to build consistent switch banks around the boat, such as at a cabin entry panel, at the helm console, or in a galley switch cluster. The axial rocker action feels familiar in use, and the button is replaceable, which helps when you are matching surrounding devices or updating legends during a refit.\u003c\/p\u003e\u003cp\u003eThis is a standard in-panel switching mechanism, so plan to mount it in a protected location inside an electrical panel or enclosure, away from direct spray and routine washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P\/1-way (on\/off) switching for controlling a single circuit from one location\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating; supports up to 200 W self-ballasted lamps\u003c\/li\u003e\n\u003cli\u003e2-module format to lay out multi-gang panels within the Vimar Arké modular system\u003c\/li\u003e\n\u003cli\u003eLightable mechanism so a compatible locator or indicator light can be added when needed\u003c\/li\u003e\n\u003cli\u003eReplaceable rocker button for cleaner labeling and a consistent look across the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis mechanism installs into a Vimar Arké mounting frame and back box like other Arké devices, then is finished with a matching cover plate. Wiring is the standard 1-way arrangement (line in and switched line out); verify conductor sizing and overcurrent protection match the circuit and your vessel’s electrical practices.\u003c\/p\u003e\u003cp\u003eWhen planning a multi-device panel, keep module count in mind: this switch uses two modules, so it pairs cleanly with other 2-module Arké components in shared cover plates.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eA good match for boats already built out with Vimar Arké, or for new interior panels where you want the same frames, devices, and cover plates throughout. If you need switching in an exposed exterior location, use an appropriate sealed switch or relocate the device to a protected panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon uses include interior lighting circuits, ventilation controls, and other on\/off loads where you want a tidy, flush panel. The illumination capability is handy on night passages when you want to find the switch quickly without turning on overhead lights.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550306697462,"sku":"APL600575","price":9.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281427_apl600575_jpeg.jpg?v=1787790431"},{"product_id":"apl201896","title":"BEP SPST Chrome Plated Long Handle Toggle Switch - ON\/OFF 1002013","description":"\u003cp\u003e\u003cstrong\u003eSPST Chrome Plated Long Handle Toggle Switch - ON\/OFF\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, single throw toggle switch turns one circuit on and off. Common applications include any single circuit requiring an on-off style switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal voltage is 12V\/24V DC\u003c\/li\u003e\n\u003cli\u003eRated for 25A at 12V DC, 15A at 24V DC\u003c\/li\u003e\n\u003cli\u003eLong handle and two 1\/4\" balde terminals\u003c\/li\u003e\n\u003cli\u003eMounting stem 15\/32\" fits panels up to 1\/4\" thick\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number 55055\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550306926838,"sku":"APL201896","price":14.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1100135_apl201896jpg.jpg?v=1787790445"},{"product_id":"apl815207","title":"Vimar EIKON 2-Module Two-Rocker Push Buttons, Marine Version, Illuminated, 29V, IP40, Grey (RAL 7024)","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMR20523 is a 2-module EIKON-series control device with two rocker push buttons for domestic switching functions on board. It is rated for a nominal 29 V and supports integrated lighting for better visibility when the cabin lights are down.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt, untreated surface in grey (RAL 7024). With an IP40 rating, it is intended for protected interior locations where it will not be exposed to washdowns or direct spray. This mechanism is completed with interchangeable 1- or 2-module button covers, which are selected separately to match your labeling and layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module device with two rocker push buttons for EIKON modular installations\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 29 V\u003c\/li\u003e\n\u003cli\u003eIntegrated lighting support to help the control stay visible in low-light cabins\u003c\/li\u003e\n\u003cli\u003eFlush-mount installation with snap fastening for quick, clean panel integration\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with matt, untreated finish\u003c\/li\u003e\n\u003cli\u003eGrey color matched to RAL 7024\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for dry, sheltered onboard mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 44.8 mm wide, 49.0 mm high, 36.1 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis unit is meant to sit in a flush-mounted EIKON position and snap into place as part of the modular assembly. Plan for at least 36.1 mm of depth behind the mounting surface, plus room for wiring bend radius so the mechanism does not get stressed when the panel is secured.\u003c\/p\u003e\u003cp\u003eBecause the front is finished with separate interchangeable button covers, confirm you have the correct 1- or 2-module cover style for your panel layout before closing up the installation. The lighting feature is most useful at helm and cabin panels where the control needs to be located quickly at night.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eIt occupies two EIKON modules and is intended for builds that use the EIKON modular format and matching cover plates and button covers. When replacing an existing device, check that your current frame and aesthetics are EIKON-based and that your chosen covers match the function you want to label at the switch position.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of two-rocker control is commonly used at interior switch panels for cabin or courtesy lighting, zoned circuits, and other onboard switching tasks where a compact two-button layout keeps the panel tidy. It is a good match for boats standardizing on EIKON components in grey and keeping controls in protected areas rather than exposed cockpits or open decks.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the surface with a soft cloth and mild cleaner as needed, and avoid harsh solvents that can mark thermoplastic finishes. If a switch position feels loose over time, recheck the snap engagement and wiring strain relief so vibration does not work the mechanism free.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550307025142,"sku":"APL815207","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827165_apl-ohy-vvf-cfo.jpg?v=1787790454"},{"product_id":"apl625028","title":"Lewmar - 52519 Toggle Switch - With Controller BUILT-IN","description":"\u003ch4\u003eConvenient Toggle Switch with Built-in Contactor\u003c\/h4\u003e\u003cp\u003eDesigned for seamless control, the Lewmar 52519 Toggle Switch with a built-in contactor offers an efficient and compact solution for smaller windlasses. Engineered for marine applications, this switch simplifies windlass operation, integrating both the toggle function and contactor into a single unit. This reduces installation complexity and enhances reliability, making it ideal for boat owners seeking a streamlined control system.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIntegrated toggle switch with built-in contactor\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for smaller windlasses\u003c\/li\u003e\n\u003cli\u003eCompact and efficient construction for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCombines switch and contactor for a simplified setup\u003c\/li\u003e\n\u003cli\u003eIdeal for marine environments and smaller windlass systems\u003c\/li\u003e\n\u003cli\u003eReduces wiring complexity and installation time\u003c\/li\u003e\n\u003cli\u003eDurable and reliable for long-term use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis toggle switch is an essential component for effortless windlass control, ensuring smooth operation in a marine setting.\u003c\/p\u003e","brand":"Lewmar","offers":[{"title":"Default Title","offer_id":51550324687094,"sku":"APL625028","price":167.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0835056_apl625028.jpg?v=1787790921"},{"product_id":"apl930024","title":"Vimar Arké Interchangeable Buttons for RF Switches, For EnOcean, Bluetooth and ZigBee RF Devices, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Arké 19506 is an interchangeable button range for compatible EnOcean, Bluetooth, and ZigBee radiofrequency devices. It covers both 1-module and 2-module layouts in Grey, Metal, and White finishes, so the visible control point can be matched to the rest of an Arké interior installation without changing the underlying RF system.\u003c\/p\u003e\u003cp\u003eThis is the visible button and cover element, not the electronic radio device itself. The listed 1-module versions measure 44.7 x 44.4 x 6.4 mm, while the listed 2-module versions measure 44.5 x 44.4 x 6.7 mm. On a boat, that makes this range more relevant for compact interior switch positions where finish, layout, and compatibility with the existing Arké RF setup matter as much as the control function.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable front button range for compatible Arké EnOcean, Bluetooth, and ZigBee RF control devices\u003c\/li\u003e\n\u003cli\u003eAvailable in 1-module and 2-module formats to match the underlying control layout\u003c\/li\u003e\n\u003cli\u003eFinish options across the range include Grey, Metal, and White\u003c\/li\u003e\n\u003cli\u003e1-module versions are supplied as 2-piece button sets, while 2-module versions use the wider 2-module format\u003c\/li\u003e\n\u003cli\u003eGrey and white variants use thermoplastic construction with a matt finish and are halogen-free\u003c\/li\u003e\n\u003cli\u003eMetal variants use lacquered thermoplastic with a matt aluminium-colour finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range changes by two main attributes: finish and module width. Finish options are Grey, Metal, and White, and each finish is available in either a 1-module or 2-module version.\u003c\/p\u003e\u003cp\u003eThe 1-module versions use the narrower format and are supplied as 2-piece button sets. The 2-module versions use the wider button format for matching 2-module RF control points. Across the range, the intended use stays centered on Arké radiofrequency controls for EnOcean, Bluetooth, and ZigBee devices, while the visible difference is mainly the width and finish.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis range is the front button piece for the Arké RF device family. It does not replace the electronic insert behind the button, and it is not the surrounding frame. That matters on refits and repairs where the boat already has Arké hardware in place and only the visible button needs to be replaced or updated.\u003c\/p\u003e\u003cp\u003eCheck the existing module width before ordering. A 1-module position and a 2-module position are different physical formats, and the finish change is cosmetic rather than a change to the radio standard or operating logic.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor marine installations, this range makes the most sense in protected interior spaces such as cabins, saloons, enclosed helm consoles, and service panels where RF switching is already part of the fit-out. The grey and white variants are rated IP40, which points them to dry locations rather than open cockpits, exterior bulkheads, or any area that sees regular spray or washdowns.\u003c\/p\u003e\u003cp\u003eIt is a sensible match for boats that already use Vimar Arké controls and need a replacement button face, a different finish, or a consistent look across several interior control points. The Metal option gives an aluminium-colour appearance, while Grey and White keep a more standard Arké finish.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"1 Module \/ White","offer_id":51550334550262,"sku":"APL930024-V1","price":4.42,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Metal","offer_id":51550334583030,"sku":"APL930024-V7","price":5.4,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ Metal","offer_id":51550334615798,"sku":"APL930024-V5","price":5.4,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ Grey","offer_id":51550334648566,"sku":"APL930024-V6","price":4.42,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Grey","offer_id":51550334681334,"sku":"APL930024-V9","price":4.42,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ White","offer_id":51550334714102,"sku":"APL930024-V8","price":4.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363150_apl930024_jpeg.jpg?v=1787791192"},{"product_id":"apl483261","title":"Vimar Eikon Push Button Switch, 1P NO, 10A 250V, With Indicator Unit, Flush-Mount, IP40, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20068 is a 1-pole, normally open momentary push button rated 10 A at 250 V~ with an indicator window for a signalling unit. It is a flush-mounted module that snaps into compatible frames and cover plates, with a front protection rating of IP40 and a compact body size of 22.30 mm wide, 49.00 mm high, and 38.50 mm deep.\u003c\/p\u003e\u003cp\u003eThis style of push button is commonly used on boats for momentary control and signalling, such as triggering a relay, sounding a buzzer, or sending a control input to another device, while the indicator window can be used to show status once a compatible signalling unit is installed. IP40 is suited to protected interior areas like cabins, nav stations, and inside consoles, not exposed locations where spray, washdowns, or heavy condensation are expected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO momentary contact (closes only while pressed), rated 10 A at 250 V~\u003c\/li\u003e\n\u003cli\u003eIntegrated indicator window with diffuser; signalling unit is not included\u003c\/li\u003e\n\u003cli\u003eFlush-mounted module with engage (snap) fastening for modular installations\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior, dry mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact body: 22.30 mm width, 49.00 mm height, 38.50 mm depth\u003c\/li\u003e\n\u003cli\u003eSingle rocker layout with label space to identify the circuit or function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis push button is offered in multiple configurations so you can match the faceplate finish and the indicator color used in the installation.\u003c\/p\u003e\u003cp\u003eThe finish and the indicator diffuser color are what change between versions. The contact type and electrical rating (1P NO, 10 A at 250 V~), IP40 protection, and the 22.30 x 49.00 x 38.50 mm body size remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20068.B.N: Finish Silver; Indicator White Indicator. This version matches silver-themed installations and keeps the indicator window a neutral white.\u003c\/li\u003e\n\u003cli\u003eVM20068.B: Finish Grey; Indicator White Indicator. A grey finish works well in darker panels and helm areas where glare and contrast are a concern.\u003c\/li\u003e\n\u003cli\u003eVM20068.B.B: Finish White; Indicator White Indicator. A white finish blends into light-colored bulkheads and switch panels, with a white diffuser for the indicator window.\u003c\/li\u003e\n\u003cli\u003eVM20068.V.B: Finish White; Indicator Green Indicator. A green indicator diffuser helps separate a function from other white indicators on the same panel, such as status or enable signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan this as a flush-mounted installation in a suitable back box, then snap the module into the compatible frame before fitting the cover plate. Allow for the 38.50 mm device depth and enough room for wire bends and terminations behind the switch.\u003c\/p\u003e\u003cp\u003eIf you want the indicator to illuminate, the unit is supplied without the signalling unit, so the lighting component needs to be selected and installed separately as part of the system.\u003c\/p\u003e\u003ch6\u003eElectrical and on-board use\u003c\/h6\u003e\u003cp\u003eWith a 10 A rating at 250 V~, this push button can be used on onboard AC circuits within that limit, and it is also commonly used as a low-current control input for relays or contactors when you do not want the load current passing through the panel device. Because it is normally open and momentary, any function that needs to stay on typically relies on the controlled equipment, a relay, or a separate latching circuit.\u003c\/p\u003e\u003ch6\u003eTypical uses on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for interiors that already use Vimar Eikon modular switchgear and need a clean momentary control with an optional status indicator. It fits well for refits where you are standardizing panel controls across cabins, galley, nav station, and protected helm areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the front face clean with a soft cloth and avoid solvents that can haze plastics. In humid environments, place the device in a protected panel location and keep wiring compartments ventilated to reduce condensation around electrical terminations.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White Indicator \/ White","offer_id":51550335566070,"sku":"APL483261-V5","price":31.25,"currency_code":"USD","in_stock":true},{"title":"Green Indicator \/ White","offer_id":51550335598838,"sku":"APL483261-V6","price":31.25,"currency_code":"USD","in_stock":false},{"title":"White Indicator \/ Silver","offer_id":51550335631606,"sku":"APL483261-V1","price":35.25,"currency_code":"USD","in_stock":true},{"title":"White Indicator \/ Grey","offer_id":51550335664374,"sku":"APL483261-V3","price":32.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1269417_apl483261_jpeg.jpg?v=1787791264"},{"product_id":"apl537712","title":"Sea-Dog - Mini Battery Switch Key","description":"\u003ch4\u003eEnhance Security with Sea-Dog's Mini Battery Switch Key\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eSea-Dog Mini Battery Switch Key with Removable Knob - 32V \u0026amp; 300A\u003c\/strong\u003e, a compact and secure solution designed to enhance the safety and efficiency of your marine electrical system. Featuring a unique removable knob, this mini battery switch offers an added layer of security, preventing unauthorized use by allowing you to easily detach and carry the knob with you. Its small footprint makes it perfect for installations where space is at a premium. Rated for 300A continuous and 1000A cranking amps, it ensures reliable performance for most marine applications. Installation is straightforward, requiring just a 2-1\/16\" hole. Constructed from durable machined brass and injection molded nylon, it's built to withstand the harsh marine environment.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemovable knob for enhanced security and peace of mind\u003c\/li\u003e\n\u003cli\u003eCompact design ideal for tight spaces\u003c\/li\u003e\n\u003cli\u003eEasy installation with a simple 2-1\/16\" hole\u003c\/li\u003e\n\u003cli\u003eRated for 300A continuous and 1000A cranking amps\u003c\/li\u003e\n\u003cli\u003eConstructed from durable machined brass and injection molded nylon\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eRobust Construction: Technical Specifications\u003c\/h4\u003e\n\u003cp\u003eThe Sea-Dog Mini Battery Switch Key is a testament to innovative engineering, offering a blend of reliability and convenience. With three switch positions (On, Off, and Out), it provides versatile control over your boat's power supply. Its robust construction ensures it can handle the demands of the marine environment, making it a trustworthy addition to your vessel.\u003c\/p\u003e\n\u003ch4\u003eCompact and Efficient: Product Dimensions\u003c\/h4\u003e\n\u003cp\u003eThis mini battery switch features a discreet yet effective design, with a switch face width of just 2-1\/16 inches. It's compatible with 32 volts systems and supports up to 300 amps of continuous load, making it suitable for a wide range of boats and yachts.\u003c\/p\u003e\n\u003ch4\u003ePower Control at Your Fingertips: Available Variations\u003c\/h4\u003e\n\u003cp\u003eSea-Dog caters to various power management needs by offering the Mini Battery Switch Key in different amperage ratings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e422730-1 300 Amp:\u003c\/strong\u003e Ideal for higher power applications, providing ample capacity for continuous and cranking amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e422732-1 100 Amp:\u003c\/strong\u003e Perfect for smaller vessels or lower power requirements, offering the same level of security and convenience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eChoose the variant that best suits your power management needs, ensuring your marine adventures are both safe and enjoyable.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"300 Amp","offer_id":51550335795446,"sku":"APL537712-V6","price":66.45,"currency_code":"USD","in_stock":true},{"title":"100 Amp","offer_id":51550335828214,"sku":"APL537712-V1","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0712370_apl537712.jpg?v=1787791236"},{"product_id":"apl266135","title":"Vimar Eikon Blank Module, 1 Module, Flush Mount, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20041 Blank Module is a 1-module blank insert for closing an unused opening in a flush-mounted Eikon switch or outlet assembly. It has a 22.30 x 49.00 x 20.50 mm body, built-in mounting, and claw fastening, so it sits in the same modular layout as the active devices around it rather than leaving an open space in the panel.\u003c\/p\u003e\u003cp\u003eThis is a non-electrical component with nominal voltage listed at 0 V, so its job is purely to finish the layout and keep the face of the panel clean and consistent. The body is thermoplastic, halogen-free, and finished in matte white, grey, or silver depending on the variant. On board, it makes sense anywhere a helm panel, cabin switch bank, or interior control point has an unused 1-module position that still needs a finished look.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1-module blank insert for unused openings in Vimar Eikon modular assemblies\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBody size of 22.30 x 49.00 x 20.50 mm for standard 1-module fit within the range\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in mounting with claw fastening for flush-mounted installations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThermoplastic construction that is halogen-free\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMatte front surface with label space on the module face\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNon-electrical insert with nominal voltage 0 V and no monitoring contact\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple colour configurations within the same 1-module blank insert format.\u003c\/p\u003e\u003cp\u003eAcross the range, the size, 1-module layout, built-in mounting, claw fastening, thermoplastic body, halogen-free construction, matte appearance, and front label surface stay consistent. The main difference is the visible finish, with white, grey, and silver options for matching nearby plates and devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eVM20041.B: White. This version keeps the panel light in appearance and suits layouts built around white Eikon plates and devices.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM20041: Grey. This version matches grey Eikon layouts and keeps unused module positions visually consistent with darker switch panels.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM20041.N: Silver. This version uses the silver Next finish for installations built around silver-toned Eikon trim and devices.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis blank module is a good match for installations that already use the Vimar Eikon modular system and need to close a spare 1-module opening without changing the frame layout. It is most useful during refits, when a device has been removed, or when extra module space is being left available for later expansion.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the series, module count, and panel finish already on the boat. The blank module matches the Eikon family and fits a single module position, so it should be paired with the correct Eikon support and cover plate arrangement already in the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is a built-in insert with claw fastening, it is suited to flush panel work where you want the face of the assembly to stay neat and even. There is no circuit function to wire, which makes it a straightforward way to finish a panel opening while keeping access to the same modular layout for future changes.\u003c\/p\u003e\u003cp\u003eIt is a sensible option for boat owners, installers, and yards tidying up helm stations, cabin switch banks, or interior panels after equipment changes. It also works when a new panel is being built in stages and one module position needs to stay closed until another device is added later.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver","offer_id":51550336155894,"sku":"APL266135-V5","price":2.95,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":51550336188662,"sku":"APL266135-V7","price":2.4,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550336221430,"sku":"APL266135-V0","price":2.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363355_apl266135_jpeg.jpg?v=1787791297"},{"product_id":"apl214541","title":"Vimar Idea RJ45 R\u0026M IBM Adaptor, For R\u0026M Freenet and IBM Type C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16365 is an RJ45 adaptor for R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connectors within the IDEA modular range. It is used where a data connection needs to sit neatly in a switch or outlet position, with front label space that helps identify the run, outlet, or connected system.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this kind of adaptor makes sense at a navigation station, cabin communications point, helm console, or service panel where structured cabling is already part of the installation. The listed device depth is 21.0 mm on both variants, and the device height varies by colour, with 50.1 mm for the ivory version and 45.0 mm for the gray version.\u003c\/p\u003e\u003cp\u003eThis is an adaptor rather than a complete data outlet, so the main fit check is the connector family already used in the vessel and the matching IDEA mounting system around it. The open front and the absence of a hinged lid keep the port easy to access for patching, inspection, and relabelling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts RJ45 connector formats used in R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C installations\u003c\/li\u003e\n\u003cli\u003eMade for the Vimar IDEA modular range\u003c\/li\u003e\n\u003cli\u003eFront label space helps identify cabin outlets, network runs, or onboard systems\u003c\/li\u003e\n\u003cli\u003eNo hinged lid, so the connection point stays easy to reach and inspect\u003c\/li\u003e\n\u003cli\u003e21.0 mm device depth on both variants, which helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eAvailable in two colour finishes to match surrounding trim and switchgear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in two colour configurations.\u003c\/p\u003e\u003cp\u003eThe colour changes between variants. Both versions are RJ45 adaptors for the same R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connector families, both include label space, both have no hinged lid, and both are listed with a 21.0 mm device depth. The listed device height differs between the two colours.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16365.C.B, Color: Ivory. This lighter finish suits interior panels and trim where the surrounding hardware is off-white or cream in tone.\u003c\/li\u003e\n\u003cli\u003eVM16365.C, Color: Gray. This darker finish blends more easily with gray switch frames, utility panels, and technical spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm that the RJ45 connector format in your installation matches R\u0026amp;M Freenet system or IBM Advanced Connectivity System Type C. It is also worth checking that the mounting position on the boat uses the IDEA series format and that the back box or panel depth is suitable for a 21.0 mm device body.\u003c\/p\u003e\u003cp\u003eThis product is a good match for boats with structured data cabling in the cabin, chart table, or electronics console, especially where a clean panel finish and clear circuit identification matter as much as connector compatibility.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eBecause the front stays open and there is no lid, this adaptor is better suited to enclosed interior locations where the connection needs to stay accessible. It works well in places where crew or service technicians may need to patch a network lead, trace a cable run, or identify a connection quickly during refit and maintenance work.\u003c\/p\u003e\u003cp\u003eFor a tidy result, pair the adaptor with the correct surrounding module and keep the outlet label consistent with the vessel's network or systems map. That small detail saves time later when tracing data lines behind helm panels or cabin joinery.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550336450806,"sku":"APL214541-V8","price":14.29,"currency_code":"USD","in_stock":false},{"title":"Ivory","offer_id":51550336483574,"sku":"APL214541-V3","price":13.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364399_apl214541_jpeg.jpg?v=1787791321"},{"product_id":"apl486863","title":"Vimar Push Button Switch, For Refrigerator, 1-Pole NC, 250VAC, 60W, Pillar Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM00900 is a 1-pole normally closed (NC) push button rated 250 V AC and 60 W (0.24 A), with screw-type pillar terminals and a white finish with a matte surface.\u003c\/p\u003e\u003cp\u003eBecause it is normally closed, the circuit stays closed at rest and opens when you press the button. That behavior is commonly used for control and interlock functions on board, including refrigerator control circuits where a button press needs to interrupt the circuit.\u003c\/p\u003e\u003cp\u003eIt fastens with screws and uses a shallow 10 mm built-in depth, which helps when you are working in tight helm, galley, or locker panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, normally closed (NC) push button action\u003c\/li\u003e\n\u003cli\u003eRated 250 V AC, 60 W (0.24 A nominal)\u003c\/li\u003e\n\u003cli\u003eScrew-type pillar terminals for straightforward terminations\u003c\/li\u003e\n\u003cli\u003eScrew-mounted fastening with 10 mm built-in depth\u003c\/li\u003e\n\u003cli\u003eNon-illuminated button with no imprint for simple panel labeling\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matte surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eKeep the switched circuit within the 60 W rating at 250 V AC. For anything that draws more than that, use the button to switch a relay, contactor, or control input instead of feeding the load directly through the contacts.\u003c\/p\u003e\u003cp\u003eTerminate conductors fully under the screw terminals, then support the wiring so vibration or a tug on the cable cannot work the connection loose. Always isolate shore power and inverter feeds before opening an AC panel.\u003c\/p\u003e\u003ch6\u003eMaterials and placement\u003c\/h6\u003e\u003cp\u003eThe thermoplastic housing suits interior electrical spaces. Mount it where it stays out of washdowns and spray, and keep the back of the unit away from areas where condensation can collect.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis push button suits refits where you need a compact NC momentary contact for a refrigerator circuit, a safety interlock, or a service stop function in a small control box. It also works well when you are standardizing controls across a boat and want a consistent look in white.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550339629302,"sku":"APL486863","price":6.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826576_apl-mzk-qxw-iqh.jpg?v=1787791363"},{"product_id":"apl335078","title":"Bluewater - Button Switch - Off\/On Contact - Blue\/Red LED - 1' Lead","description":"\u003ch3\u003eSleek and Reliable Control for Your Marine Vessel\u003c\/h3\u003e\u003cp\u003eIntroducing the Bluewater 22mm Push Button Switch, a stylish and functional addition to any marine dashboard. This stainless-steel plated button features a standard Off\/On contact, providing reliable control for your marine equipment. Its modern design, combined with advanced features, ensures that your marine controls are both visually appealing and highly efficient.\u003c\/p\u003e\u003ch3\u003eBuilt for Marine Durability and Performance\u003c\/h3\u003e\u003cp\u003eThe Bluewater Push Button Switch is engineered to withstand harsh marine environments, boasting an IP69K waterproof rating for maximum protection against water and dust. Its rugged stainless-steel construction and included gasket provide additional durability, making it suitable for even the toughest conditions. At night, the switch is backlit with a blue LED light for clear visibility, which changes to red when activated, providing immediate status indication.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IP69K for maximum protection against water and dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Indicators:\u003c\/strong\u003e Blue for off state, red for on state.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e High-quality stainless steel ensures longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e Simple setup with color-coded contacts for safety and convenience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Contact:\u003c\/strong\u003e Off\/On functionality for versatile control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Off-On (standard contact)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Colors:\u003c\/strong\u003e Off: Blue; On: Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Mark Page:\u003c\/strong\u003e Red dot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch Rating:\u003c\/strong\u003e 15A \/ 12-24VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Life:\u003c\/strong\u003e 50,000 cycles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Life:\u003c\/strong\u003e 10,000 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompact and Efficient Design\u003c\/h3\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 22mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Length:\u003c\/strong\u003e 1 ft\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesigned for Marine Excellence\u003c\/h3\u003e\u003ch4\u003ePremium Finishes\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Body:\u003c\/strong\u003e Provides a sleek, modern look while ensuring durability and resistance to corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP69K Rating:\u003c\/strong\u003e Ensures the switch remains waterproof and dustproof, suitable for all marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eEasy and Secure Installation\u003c\/h3\u003e\u003cp\u003eInstalling the Bluewater Push Button Switch is straightforward:\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill a 22mm Hole:\u003c\/strong\u003e Suitable for materials up to 6mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect Contacts:\u003c\/strong\u003e Attach the 3 color-coded contacts for the button and the 2 contacts for the LED.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eVariations List\u003c\/h3\u003e\u003cp\u003eTo cater to different needs, the Bluewater Push Button Switch comes in various sizes:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22mm Model:\u003c\/strong\u003e Standard size, perfect for most marine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19mm Model:\u003c\/strong\u003e Slightly smaller option for more compact installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExperience Unmatched Reliability with Bluewater\u003c\/h3\u003e\u003cp\u003eUpgrade your marine dashboard with the Bluewater 22mm Push Button Switch. Designed for both functionality and style, this switch offers unparalleled performance and durability in any marine environment. Whether you’re navigating through rough waters or docked at the marina, this switch ensures your boat’s controls are always clear and easy to use. Illuminate your adventures with the trusted reliability of Bluewater.\u003c\/p\u003e","brand":"Bluewater","offers":[{"title":"19mm","offer_id":51550341628150,"sku":"APL335078-3","price":63.0,"currency_code":"USD","in_stock":true},{"title":"22mm","offer_id":51550341660918,"sku":"APL335078-4","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717505_apl332160.jpg?v=1787791487"},{"product_id":"apl716030","title":"Attwood Marine Bilge Pump Switch, 6-32V DC, 10A, Panel Mount, 1\/4 in Spade Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Attwood Marine bilge pump switch is a panel-mounted rocker switch for controlling a bilge pump from the helm, cockpit, or another accessible station on board. It is used with DC bilge pump circuits drawing 10 amps or less and supports 6V through 32V DC systems, making it suitable for many 12V and 24V boat installations.\u003c\/p\u003e\u003cp\u003eThe switch uses 1\/4 in. spade terminals and has a face plate measuring 2-13\/16 in. x 1-7\/8 in. It is a practical replacement or upgrade when a simple pump control panel is needed without adding a larger switch panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePanel-mounted rocker format for clean installation at the helm, console, cabin panel, or service area.\u003c\/li\u003e\n\u003cli\u003eSupports 6V through 32V DC bilge pump circuits with a maximum pump draw of 10 amps.\u003c\/li\u003e\n\u003cli\u003eUses 1\/4 in. spade terminals for straightforward wiring with common marine crimp connectors.\u003c\/li\u003e\n\u003cli\u003eFace plate measures 2-13\/16 in. x 1-7\/8 in. for a compact panel footprint.\u003c\/li\u003e\n\u003cli\u003eAvailable in 2-way and 3-way versions to match basic manual control or automatic bilge pump control layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis bilge pump switch is offered in two switch-position configurations for different bilge pump wiring setups.\u003c\/p\u003e\u003cp\u003eThe 2-way version is for simple On\/Off pump control. The 3-way version adds Auto\/Off\/Manual control for use with an automatic bilge pump or a float-switch controlled bilge system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7615-3: Switch positions 2-Way. This version gives straightforward On\/Off control when the operator wants direct manual control of the bilge pump circuit.\u003c\/li\u003e\n\u003cli\u003e7615A3: Switch positions 3-Way. This version gives Auto\/Off\/Manual control so the pump can be left in automatic mode, shut off, or run manually from the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the switch on a flat panel with enough depth behind it for the switch body and wiring. The circuit should be fused according to the bilge pump instructions, and all wiring should be secured so vibration and movement do not pull on the terminals.\u003c\/p\u003e\u003cp\u003eRun pump wiring so connections stay above the highest possible water level, and make water-resistant electrical connections in the bilge area. This switch is not external ignition protected, so it should not be installed where ignition-protected equipment is required.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis switch is a good match for small to mid-size boats that need a dedicated bilge pump control at the helm, console, or electrical panel. It works well for replacing a worn bilge rocker switch or adding a simple control point during a bilge pump installation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"2-Way","offer_id":51550342414582,"sku":"APL716030-V0","price":28.86,"currency_code":"USD","in_stock":false},{"title":"3-Way","offer_id":51550342447350,"sku":"APL716030-V1","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327722_apl716030.webp?v=1787791533"},{"product_id":"apl531538","title":"Vimar Plana 1P NC Pushbutton Mechanism, 10A 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14010.0 is a Plana-series 1-pole, normally-closed (NC) push button mechanism rated 10 A at 250 V AC, and it accepts a locator or indicator light when paired with a compatible light module. In NC operation the circuit is closed at rest and opens while you press the button, then returns to closed when released.\u003c\/p\u003e\u003cp\u003eThis mechanism is meant for flush mounting in Plana modular plates and is completed with a 1-, 2- or 3-module button. With an IP40 protection rating, it belongs in protected interior locations such as a cabin switch panel, nav station, or inside a console, not in areas exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole NC momentary contact: circuit opens only while the button is pressed\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A at 250 V AC for circuits that stay within the switch rating\u003c\/li\u003e\n\u003cli\u003eLightable mechanism that supports adding an indicator or locator light with a compatible light module\u003c\/li\u003e\n\u003cli\u003eCompletes with 1-, 2- or 3-module Plana button to match common modular panel layouts\u003c\/li\u003e\n\u003cli\u003eFlush-mounted form factor with snap-in fastening for quick installation in the support\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with glossy white finish (RAL 9003)\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, enclosed spaces behind a panel\u003c\/li\u003e\n\u003cli\u003eCompact size: 22.3 mm wide, 49.0 mm high, 38.7 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is part of the Vimar Plana modular system. It is intended to be finished with a matching Plana button and installed into the appropriate Plana mounting support and cover plate format for your panel.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003ePlan the function first: an NC push button is commonly used where the circuit should remain closed until someone presses the button, such as an alarm loop, interlock, or a control input that needs to open on command. For switching loads directly, confirm the load type and switching current are within the 10 A, 250 V AC rating and that your enclosure and wiring are suitable for the circuit on board.\u003c\/p\u003e\u003cp\u003eOnce installed, the engage snap fastening holds the mechanism in place. After a few trips, it is worth re-checking terminal tightness since boats see vibration and temperature swings.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits or new builds that already use Plana modules in interior panels and want a push button that keeps the panel tidy and stays easy to service. If the mounting spot is anywhere that regularly sees salt spray, rain, or washdowns, a sealed, higher-IP device is the better fit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face and surrounding plate clean and dry, and avoid aggressive solvents that can haze glossy plastics. In technical spaces, a quick periodic check for moisture ingress and corrosion at the terminals helps prevent intermittent faults.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550345134326,"sku":"APL531538","price":13.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826955_apl-r3s-vch-xev.jpg?v=1787791635"},{"product_id":"apl758266","title":"Vimar IDEA Series General Symbol Push Button, 1P NO, 10A, 250V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar IDEA Series is a range of 1P normally open push buttons with a general symbol for flush-mounted modular installations. Across the listed versions, the rating is 10 A at 250 V, the front size is 21.8 mm wide by 50.1 mm high, and the body clips into place with snap fastening.\u003c\/p\u003e\u003cp\u003eThis type of switch suits protected interior panels where the vessel is already built around the IDEA modular system. The housing is halogen-free thermoplastic with a matt finish and IP40 protection, and depth varies by version, with standard 1-module buttons at about 36.5 mm and the 2-module or luminous versions at 32.5 mm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO push button with general symbol, rated 10 A at 250 V\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular format with snap-in fastening for IDEA system installations\u003c\/li\u003e\n\u003cli\u003eCompact face size of 21.8 mm x 50.1 mm, with shallow depth that helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt surface and label area\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003cli\u003eRange includes grey or white finishes, 1-module and 2 reduced-module formats, plus luminous versions for signalling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes in three ways: colour, module format, and whether the button is arranged for illumination. Standard versions are available in grey or white as a 1-module device, and there are also grey and white versions that occupy 2 reduced modules.\u003c\/p\u003e\u003cp\u003eThe luminous versions are 1-module buttons in grey or white and are intended for use with a signalling unit, which is not included. The 10 A 250 V rating, single push-button operation, matt finish, halogen-free thermoplastic body, and IP40 protection stay the same across the listed versions.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good match when the boat or refit already uses Vimar IDEA supports, frames, and matching modules. Before ordering, check the panel layout for 1-module or 2 reduced-module spacing, confirm the finish you want, and verify the available depth behind the mounting point.\u003c\/p\u003e\u003cp\u003eBecause protection is IP40, it is better suited to protected cabin panels, interior helm areas, and technical spaces than to exposed deck locations or areas that see regular washdowns. For luminous versions, the signalling unit needs to be added separately during assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe built-in format keeps the front neat and works well where several controls need to sit in one modular frame. The general symbol keeps the function neutral, which is useful on vessels where the same switch style is used across cabins, service panels, and protected control positions.\u003c\/p\u003e\u003cp\u003eIt also makes sense for owners and yards replacing one worn module without changing the rest of an existing IDEA installation. Matching the module width and colour is usually the main point to confirm before fitting.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey\/Indicator \/ 1 Module","offer_id":51550348640502,"sku":"APL758266-7","price":18.19,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Modules","offer_id":51550348673270,"sku":"APL758266-1","price":22.5,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module","offer_id":51550348706038,"sku":"APL758266-6","price":15.59,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Modules","offer_id":51550348738806,"sku":"APL758266-0","price":23.39,"currency_code":"USD","in_stock":false},{"title":"White\/Indicator \/ 1 Module","offer_id":51550348771574,"sku":"APL758266-2","price":17.5,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1 Module","offer_id":51550348804342,"sku":"APL758266-9","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828607_apl758266.jpg?v=1787791785"},{"product_id":"apl304392","title":"Blue Sea Systems Contura Single Bilge Pump Control Panel, 12\/24V DC, IP66, ON-Off-Auto","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems 8263 is a control panel for a single bilge pump, with a water-resistant face and an ON-OFF-AUTO Contura switch, for 12V or 24V DC systems. It fits a compact panel space at 3.75 in high, 2.25 in wide, and 3.00 in deep.\u003c\/p\u003e\u003cp\u003eThe switch is rated for 20A at 12V DC and 15A at 24V DC, and the fuse holder accepts commonly available AGC and MDL glass fuses up to 20A. An embedded ON LED shows when the pump circuit is running, which helps when you want a quick status check from the helm or dash.\u003c\/p\u003e\u003cp\u003eThis panel gives you a clean control point for manual and automatic bilge pump operation without piecing together separate switch and fuse components. The watertight mounting gasket and water-resistant front suit installations that see spray, including flybridge and open cockpit layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle bilge pump control panel for 12V or 24V DC systems\u003c\/li\u003e\n\u003cli\u003eON-OFF-AUTO Contura switch with an embedded ON LED for pump status indication\u003c\/li\u003e\n\u003cli\u003eSwitch rating of 20A at 12V DC and 15A at 24V DC\u003c\/li\u003e\n\u003cli\u003eFuse holder accepts AGC and MDL glass fuses up to 20A\u003c\/li\u003e\n\u003cli\u003eWater-resistant front with a watertight mounting gasket for exposed mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-wired construction helps shorten installation time and keeps wiring work more straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe panel comes pre-wired, so the job is mainly mounting the unit, tying it into the bilge pump circuit, and fitting the correct AGC or MDL glass fuse for the load. Its compact face makes it easier to place on a helm panel, console face, or other small switch area where space is limited.\u003c\/p\u003e\u003cp\u003ePlan for about 3 in of clearance behind the mounting surface. That extra depth check is worth doing before cutting into a dash panel or replacing an older control.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis panel is meant for one bilge pump and works on either 12V or 24V DC boats. It is a practical fit where the owner wants a dedicated switch panel instead of a loose switch and inline fuse holder, and it uses AGC and MDL glass fuses that are easy to source in many marine service setups.\u003c\/p\u003e\u003cp\u003eIt suits owners replacing an older bilge pump control panel or adding a cleaner helm control on center consoles, walkarounds, pilot houses, and similar boats where the switch area may see spray and regular use.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":51550360830198,"sku":"APL304392","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322643_apl304392.webp?v=1787792009"},{"product_id":"apl182765","title":"Vimar Eikon Socket Outlet, Italian Standard P17\/11, 2P+E, 16A, 250V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20203 SICURY P17\/11 socket outlet is a 2P+E, 16 A, 250 V flush-mounted outlet insert for Italian standard P17\/11 AC installations. It is a one-module device with a compact 22.3 x 49 x 34.5 mm body, which makes it a straightforward fit where panel space is limited and the installation uses the Eikon modular format.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matte finish, and wiring is made through screw terminals. SICURY contact protection adds an internal shutter that closes when the plug is removed. With an IP20 rating, this outlet belongs in a protected interior location such as a cabin panel, galley bulkhead, or chart table installation, not in open deck, cockpit, or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E Italian type Bipasso outlet in P17\/11 format\u003c\/li\u003e\n\u003cli\u003eRated 16 A at 250 V, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003eOne-module insert for flush-mounted Eikon installations\u003c\/li\u003e\n\u003cli\u003eScrew terminal connection for fixed wiring\u003c\/li\u003e\n\u003cli\u003eSICURY contact protection with shuttered outlet openings\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte finish\u003c\/li\u003e\n\u003cli\u003eIP20 protection for dry interior mounting points\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in four color configurations within the same Eikon 20203 family.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical format stays the same: 2P+E Italian standard P17\/11, 16 A, 250 V, 50 to 60 Hz, one module, flush mounting, screw terminals, halogen-free thermoplastic construction, IP20 protection, and 22.3 x 49 x 34.5 mm dimensions. The changes between variants are finish and, in the red version, application marking.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20203.B: Color White. This version keeps the outlet in a light Eikon palette for interiors that use white plates and trim.\u003c\/li\u003e\n\u003cli\u003eVM20203.N: Color Silver. This version uses a silver finish with a lacquered matte surface that matches Eikon Next silver hardware.\u003c\/li\u003e\n\u003cli\u003eVM20203.R: Color Red. This version is marked for dedicated supply lines, which helps separate a specific AC circuit from general-purpose outlets.\u003c\/li\u003e\n\u003cli\u003eVM20203: Color Grey. This version keeps the outlet in the darker Eikon palette and gives a lower-contrast look on dark panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and placement\u003c\/h6\u003e\u003cp\u003eCheck both the plug standard and the modular system before ordering. This insert is for Italian standard P17\/11 outlets and uses the Eikon one-module format, so it suits refits where the boat already has that layout in place.\u003c\/p\u003e\u003cp\u003eIP20 means it should stay in a protected interior space. It works for cabin, galley, chart table, and other enclosed AC points, but it is not the right choice for open cockpit panels, deck lockers, or other areas that see spray or washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550367351030,"sku":"APL182765-V7","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550367383798,"sku":"APL182765-V6","price":34.5,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550367416566,"sku":"APL182765-V5","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51550367449334,"sku":"APL182765-V9","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363536_apl182765_jpeg.jpg?v=1787792220"},{"product_id":"apl284363","title":"Blue Sea Systems Contura Switch Mounting Panel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Blue Sea Systems Contura Switch Mounting Panel is a modular mounting system for fitting Blue Sea Systems Contura switches into a helm, dash, cockpit, cabin, or equipment panel. The brackets are made to build clean switch banks in different sizes, with center and end pieces for grouped installations, a single-position option for one switch, and a plug for closing an unused switch opening.\u003c\/p\u003e\u003cp\u003eThe center, end, and single mounting brackets fit six panel thicknesses: 0.06\" (1.57mm), 0.09\" (2.36mm), 0.13\" (3.17mm), 0.19\" (4.75mm), 0.25\" (6.35mm), and 0.38\" (9.52mm). That range covers many common fiberglass, aluminum, and fabricated dash panels found on recreational and work boats.\u003c\/p\u003e\u003cp\u003eThis series is useful when a boat owner, installer, or electronics technician wants a Contura switch layout that looks organized and can be expanded without replacing the entire panel face. It is a hardware mounting product, so switch electrical ratings, circuit protection, and wiring details should be matched to the specific Contura switch and circuit being installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eModular bracket format supports switch groups in different sizes, with center and end pieces used to build multi-switch layouts.\u003c\/li\u003e\n\u003cli\u003eMounting bracket options are available for single-position layouts and grouped Contura switch banks.\u003c\/li\u003e\n\u003cli\u003eCenter, end, and single brackets fit six panel thicknesses from 0.06\" (1.57mm) through 0.38\" (9.52mm).\u003c\/li\u003e\n\u003cli\u003eWorks with Blue Sea Systems Contura switch families, including common SPST, SPDT, DPST, and DPDT Contura configurations.\u003c\/li\u003e\n\u003cli\u003ePanel plug option fills an unused Contura switch mounting panel opening for a cleaner dash or switch bank.\u003c\/li\u003e\n\u003cli\u003eCompact bracket format helps keep switch additions tidy on helm panels, cabin control panels, and accessory switch locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in four configurations for building or finishing a Contura switch mounting layout.\u003c\/p\u003e\u003cp\u003eThe mounting role changes by variant. The center and end brackets are used together for grouped switch banks, the single bracket is used for one switch position, and the plug fills an unused opening in a Contura switch mounting panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8266, Type Center. This center bracket is used within a multi-switch assembly, between end brackets, when adding switch positions to a grouped Contura layout.\u003c\/li\u003e\n\u003cli\u003e8267, Type End. This end bracket finishes the outside edge of a grouped switch bank and helps define the left or right side of the assembled panel opening.\u003c\/li\u003e\n\u003cli\u003e8278, Type Plug. This plug is used with a Contura switch mounting panel when a switch opening needs to be closed rather than populated with a switch.\u003c\/li\u003e\n\u003cli\u003e8268, Type Single. This single-position bracket is used when the panel only needs one Contura switch or control in that location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore cutting or modifying a panel, confirm the selected bracket type, the number of switch positions, and the panel thickness at the mounting location. The supported thickness range is especially helpful on boats where the dash or console may include fiberglass laminate, overlay panels, or custom electrical panel faces.\u003c\/p\u003e\u003cp\u003eFor grouped layouts, the center and end pieces should be planned as a set so the finished switch bank has the correct number of positions and a clean edge on both sides. For a single accessory switch, such as a light, pump, horn, or electronics power control, the single-position bracket keeps the installation compact.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThese mounting panels suit refits, helm upgrades, and accessory additions where Contura rocker switches are already being used or are being added for a new circuit. They are a practical match for small control clusters at the helm, cockpit, cabin entry, flybridge, or equipment panel where a neat switch opening matters as much as the circuit layout.\u003c\/p\u003e\u003cp\u003eThe plug option is useful during staged upgrades. An installer can leave space for a future circuit and close the unused opening until the next switch is added.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Center","offer_id":51550368071926,"sku":"APL284363-V1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Single","offer_id":51550368104694,"sku":"APL284363-V7","price":8.99,"currency_code":"USD","in_stock":true},{"title":"Plug","offer_id":51550368137462,"sku":"APL284363-V0","price":8.99,"currency_code":"USD","in_stock":true},{"title":"End","offer_id":51550368170230,"sku":"APL284363-V6","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370807_apl284363_jpeg.jpg?v=1787792264"},{"product_id":"apl946800","title":"Vimar 3-Module Flush Mounting Box, For Masonry Walls, 20\/25 mm Knockouts, 96 x 59 x 49.8 mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar 3-module flush mounting box is a rectangular box for masonry walls with space for three device inserts in a 96 x 59 mm format. It has a 50 mm inner depth, up to 49.8 mm installation depth, and 12 inlets with break-out openings sized for 20\/25 mm conduit.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free plastic and the box can be coupled with matching accessories when several boxes need to be installed in line. It also includes a patented rack for a dividing screen and zinc-plated support screw lugs that help keep the threads clear during installation. This is the concealed box behind the finished device, not a standalone exposed enclosure.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module rectangular flush box for masonry wall installations\u003c\/li\u003e\n\u003cli\u003e96 x 59 mm body with 50 mm inner depth\u003c\/li\u003e\n\u003cli\u003e12 inlets with break-out openings for 20\/25 mm conduit\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic housing\u003c\/li\u003e\n\u003cli\u003eCouplable format for multi-box runs with matching joints\u003c\/li\u003e\n\u003cli\u003ePatented rack for fitting a dividing screen\u003c\/li\u003e\n\u003cli\u003eZinc-plated support screw lugs to help avoid thread clogging during fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations of the same 3-module flush mounting box for masonry walls.\u003c\/p\u003e\u003cp\u003eThe differences between the variants are the glow-wire rating and the box color. The masonry wall format, 3-module layout, and general installation concept remain the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMV71303: Glow Wire 650 °C, light blue. This version uses the light blue housing commonly specified for standard masonry installations.\u003c\/li\u003e\n\u003cli\u003eVMV71303.AU: Glow Wire 960 °C, black. This version keeps the same box format with a black housing and a higher glow-wire rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for flush mounting in masonry walls and for switchgear that mounts by screwing into place. It is not a hollow-wall or plasterboard box, so it suits solid-wall installations where conduit entry, internal wiring space, and a clean flush finish matter more than surface access.\u003c\/p\u003e\u003cp\u003eIt also works where separate internal compartments are needed, since a matching dividing screen can be fixed to the internal rack. Anti-mortar covers and coupling joints are available for cleaner rough-in work and for creating multi-box combinations.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe conduit entries are formed by break-out openings, including rear entry, which makes it easier to route wiring into the box from different directions during first fix. The box itself is rated IP00, so the final protection level depends on the complete assembly installed over it.\u003c\/p\u003e\u003cp\u003eThis is a practical choice for built-in electrical points in masonry utility spaces, marina service buildings, workshop walls, and other fixed installations where a Vimar 3-module flush box is required. It is less suited to lightweight interior panels, where a hollow-wall box would be the better fit.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Glow Wire 650\/Light Blue","offer_id":51550369317110,"sku":"APL946800-7","price":0.8,"currency_code":"USD","in_stock":true},{"title":"Glow Wire 960\/Black","offer_id":51550369349878,"sku":"APL946800-1","price":2.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827933_apl946800.jpg?v=1787792293"},{"product_id":"apl441004","title":"Cole Hersee - Vinyl Coated Push Button Switch - SPST, Off-On, 2 Wire","description":"\u003ch4\u003eSeamless Control at Sea: Vinyl Coated Push Button Switch\u003c\/h4\u003e\n\u003cp\u003eIntroducing the ultimate solution for efficient and durable control in marine environments, the Vinyl Coated Push Button Switch offers a blend of robust design and seamless operation. Crafted for reliability, this switch is your go-to for straightforward, waterproof control. Its PVC coating ensures protection against harsh marine conditions, while the simple off-on functionality provides effortless operation for all your marine applications. Whether navigating the high seas or enjoying a leisurely day on the water, this switch guarantees performance and durability.\u003c\/p\u003e\n\u003ch4\u003eDive Deep into Technical Mastery\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSPST (Single Pole Single Throw) off-on configuration for clear, uncomplicated control.\u003c\/li\u003e\n\u003cli\u003eRobust PVC coating for unmatched waterproof protection.\u003c\/li\u003e\n\u003cli\u003eIntegrated 2 wire leads for easy and secure connections.\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand the rigors of marine use with exceptional durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompact Power, Vast Seas\u003c\/h4\u003e\n\u003cp\u003eWith general dimensions that promise to integrate seamlessly into your marine setup, this switch is compact yet powerful. Its design ensures it doesn't intrude on your space, yet provides the reliable functionality you need on the open water.\u003c\/p\u003e\n\u003ch4\u003eVivid Shades of Durability\u003c\/h4\u003e\n\u003cp\u003eThe vinyl coating not only offers protection but also comes in various colors to match your aesthetic or functional requirements. This added versatility ensures that your marine equipment can maintain a coherent and appealing look without sacrificing quality or performance.\u003c\/p\u003e","brand":"Cole Hersee","offers":[{"title":"Default Title","offer_id":51550371643638,"sku":"APL441004","price":28.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0705355_apl441004.jpg?v=1787792417"},{"product_id":"apl417064","title":"BEP Remote Battery Management Cluster f\/Single Engine 80-716-0014-00","description":"\u003cb\u003eRemote Battery Management Cluster f\/Single Engine\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOffers all features of motorized battery switches and Motorized VSRs in one kit. Makes ordering easy! Clusters are surface mount, and can be rearranged to meet specific needs, such as port and starboard configurations and can be combined with other battery distribution products. Available in single, dual and triple engine configurations\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550375411958,"sku":"APL417064","price":824.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1104547_apl417064jpg.jpg?v=1787792606"},{"product_id":"apl201577","title":"BEP SPST Chrome Plated Toggle Switch -OFF\/(ON) 1002002","description":"\u003cp\u003e\u003cstrong\u003eSPST Chrome Plated Toggle Switch -OFF\/(ON)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, single throw toggle switch turns one circuit on and off. Common applications include intermittent horn or windshield wiper control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal voltage is 12V DC\u003c\/li\u003e\n\u003cli\u003eRated for 25A at 12V DC\u003c\/li\u003e\n\u003cli\u003eTwo #6-32 screw terminals\u003c\/li\u003e\n\u003cli\u003eMounting stem 15\/32\" fits panels up to 1\/4\" thick\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number 55020-02\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550377804022,"sku":"APL201577","price":10.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1100124_apl201577jpg.jpg?v=1787792699"},{"product_id":"apl149675","title":"Vimar Eikon Classic 3-Module Cover Plate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20653 Classic cover plate is a 3-module front plate for the Eikon wiring range, used to finish switches, sockets, and similar modular control points with a square, flush-mounted look. Across the validated versions in this family, it can be installed horizontally or vertically, and the face size is around 119.8 x 84.8 mm on metal and wood versions, while Reflex versions are about 120 x 85 mm with a 10 mm depth.\u003c\/p\u003e\u003cp\u003eThis listing covers multiple finishes, and the base material changes with the version. Metal, Reflex technopolymer or acrylic, and Italian walnut variants are all present in the 20653 range, so the exact finish code matters when you are replacing an existing plate or keeping a refit consistent across the cabin.\u003c\/p\u003e\u003cp\u003eOn board, this cover plate fits best in protected interior spaces such as cabins, saloons, galleys, and other dry accommodation areas. The front protection is IP00, so it is not the right choice for exposed helm positions, open cockpits, or washdown zones.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e3-module Eikon Classic cover plate for modular switch and socket layouts\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan be mounted horizontally or vertically\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMade for flush-mounted installations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFinish range in this listing includes satin, matte, chrome-effect, Reflex, and wood options\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eValidated versions in this family are halogen-free\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaterial depends on finish, with metal, technopolymer or acrylic, and solid wood versions in the range\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExternal dimensions vary slightly by version, with metal and wood examples at about 119.8 x 84.8 x 9 mm and Reflex examples at about 120 x 85 x 10 mm\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis family is offered in a wide spread of finishes, including Satin Gold, White Chrome, Ice White, Arctic White, Black Chrome, Matte Silver, Matte Titanium, Satin Nickel, Reflex Anthracite, Matte Anthracite, Silver, Antique White, Brushed Silver, Italian Walnut, Graphite, and Anthracite.\u003c\/p\u003e\u003cp\u003eThe main difference across the range is the finish, but the underlying material also changes with some versions. The validated range includes painted or plated metal options, Reflex technopolymer or acrylic options, and an Italian Walnut solid wood option. The format stays within the Eikon Classic 3-module family, though outside dimensions and depth can vary slightly by version.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the visible cover plate only, so it needs to match the correct 3-module Eikon installation behind it. For a replacement job, check the existing series, the 3-module opening, the mounting orientation, and the finish code before ordering, especially when you are matching other cabins, bulkheads, or switching points on board.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Matte Titanium","offer_id":51550378459382,"sku":"APL149675-V4","price":49.52,"currency_code":"USD","in_stock":false},{"title":"Antique White","offer_id":51550378492150,"sku":"APL149675-V8","price":42.5,"currency_code":"USD","in_stock":false},{"title":"Satin Nickel","offer_id":51550378524918,"sku":"APL149675-V5","price":55.0,"currency_code":"USD","in_stock":false},{"title":"Matte Anthracite","offer_id":51550378557686,"sku":"APL149675-V6","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Reflex Anthracite","offer_id":51550378590454,"sku":"APL149675-V51","price":15.25,"currency_code":"USD","in_stock":true},{"title":"Black Chrome","offer_id":51550378623222,"sku":"APL149675-V2","price":57.18,"currency_code":"USD","in_stock":true},{"title":"Italian Walnut","offer_id":51550378655990,"sku":"APL149675-V10","price":127.87,"currency_code":"USD","in_stock":false},{"title":"Graphite","offer_id":51550378688758,"sku":"APL149675-V11","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ice White","offer_id":51550378721526,"sku":"APL149675-V09","price":13.5,"currency_code":"USD","in_stock":false},{"title":"Arctic White","offer_id":51550378754294,"sku":"APL149675-V1","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Brushed Silver","offer_id":51550378787062,"sku":"APL149675-V9","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Matte Silver","offer_id":51550378819830,"sku":"APL149675-V3","price":47.56,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550378852598,"sku":"APL149675-V7","price":41.5,"currency_code":"USD","in_stock":true},{"title":"White Chrome","offer_id":51550378885366,"sku":"APL149675-V0","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1313704_apl149675.webp?v=1787792724"},{"product_id":"apl389975","title":"Sea Dog Marine Brass Two Position Switch On\/Off (420390-1)","description":"\u003cp\u003eSea-Dog Line 420390-1 15 amp, four-position, Mercury Switch housed in a stamped brass body. It has two positions: off and on. The mounting stem is three-eighths inch in diameter by one inch long. This switch's on\/off capability makes it helpful in controlling most anything, and many things can be combined to make other things work, such as switching lights on and off or cranking motors and many other applications. There are many times when you are at the boat, and there's no one to flip the switch up or down if the boat stops running or you just want it to go under the bridge. That is where devices like these switches come in handy.\u003c\/p\u003e\n\u003cp\u003eKey features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eRated at 25 amps at 6 volts and 15 amps at 12 volts.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1\" panel can be accommodated\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe mounting stem measures 1-1\/4\" in length. 3\/8\" in diameter\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOverall length is 3-1\/8,\" and width is 7\/8\"\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eChrome-plated plastic knob with a chrome-plated brass face nut, washer, and backup nut\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSpring made of stainless steel\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eBrand: Sea-Dog Line Marine\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eManufacturer's Part Number: 3-420390-1\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e420390-1 - Push-pull switch features positive actuation with two positions On-Off (normally Off). Stamped brass construction. Rated 15 amps @ 12VDC. 420410-1 - One circuit, normally off, three position: Off\/On\/On. Ideal for cabin or running lights.\u003c\/p\u003e\n\u003ch4\u003eThis product replaces:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e420390\u003c\/li\u003e\n\u003cli\u003e420390-1\u003c\/li\u003e\n\u003cli\u003e3-420390\u003c\/li\u003e\n\u003cli\u003e35514420020\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":51550385373430,"sku":"APL389975","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1103793_apl389975jpg.jpg?v=1787792932"},{"product_id":"apl399782","title":"Vimar Eikon SICURY French Standard Socket Outlet, 2P+E 16A 250V, 2-Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20212 is a French-standard 2P+E SICURY socket outlet rated 16 A at 250 V~ in a 2-module format for flush mounting. It is a single outlet for 50-60 Hz AC systems with enhanced contact protection and an IP20 rating, so it belongs in dry interior areas on board.\u003c\/p\u003e\u003cp\u003eOn a boat this is typically used where you want a familiar French plug point on a 230 V distribution fed from shore power, an inverter, or an onboard generator. It works well at a nav station, in a cabin, or in the saloon, where the outlet is protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe body is thermoplastic with a matt surface finish and it is halogen free. Allow for the device footprint behind the plate: 44.8 mm wide, 49.0 mm high, and 35.9 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFrench 2P+E socket format for Type E plugs, 1 outlet in a 2-module Eikon device size.\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 16 A, 250 V~ AC, 50-60 Hz.\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection to reduce accidental contact with live parts.\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation for clean integration in interior panels and bulkheads.\u003c\/li\u003e\n\u003cli\u003eIP20 rating, intended for protected locations away from direct water spray.\u003c\/li\u003e\n\u003cli\u003eThermoplastic body, halogen free, with a matt finish.\u003c\/li\u003e\n\u003cli\u003eLabel space on the front for circuit identification.\u003c\/li\u003e\n\u003cli\u003eOffered with either screwed terminals or push-in clamp (screwless) terminals depending on variant.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in multiple configurations to match the look of your interior and the way you prefer to wire the circuit.\u003c\/p\u003e\u003cp\u003eAcross the range, the visible color varies (Grey, White, Silver), along with the front style (No Cover, With Cover, or Flat Design). Installation also varies between versions that use screwed terminals and versions that use push-in clamp (screwless) terminals.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a flush-mounted, modular device, so it should be fitted into a suitable recessed box or mounting solution and aligned to the rest of the Eikon modular layout. Before wiring, isolate the AC supply at the main breaker and verify the circuit is de-energized.\u003c\/p\u003e\u003cp\u003eAfter installation, check polarity and that the protective earth is continuous back to the vessel system. In marine AC systems, this outlet should be protected by an RCD or equivalent residual-current device upstream, and the circuit should be sized appropriately for a 16 A receptacle.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis product is for 250 V~ AC distribution, not for 12 V or 24 V DC. It is meant for French-standard plugs, so confirm your onboard appliances and adapters match the socket format you are installing.\u003c\/p\u003e\u003cp\u003eBecause it is a 2-module Eikon device, confirm your mounting layout, frames, and plates are set up for a 2-module outlet position, and that you have at least 35.9 mm of clear depth behind the finished surface for the device body and cable bend radius.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners refitting cabins, saloons, and nav areas where you want a French receptacle in a modular Eikon layout and the outlet sits in a protected, dry location. For galleys, heads, or anywhere with frequent moisture, place it where it is sheltered and consider a covered front style for an extra physical barrier at the face.\u003c\/p\u003e\u003cp\u003eAs with any onboard AC outlet, inspect periodically for heat discoloration, loose wiring, and any signs of corrosion from airborne salt, especially if the boat sees heavy ventilation or doors are often left open at the dock.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"With Cover \/ Grey \/ Screws","offer_id":51550390616310,"sku":"APL399782-V3","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ Silver \/ Screwless","offer_id":51550390649078,"sku":"APL399782-V12","price":36.75,"currency_code":"USD","in_stock":false},{"title":"No Cover \/ Silver \/ Screws","offer_id":51550390681846,"sku":"APL399782-V7","price":31.71,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ Silver \/ Screws","offer_id":51550390714614,"sku":"APL399782-V2","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ White \/ Screwless","offer_id":51550390747382,"sku":"APL399782-V11","price":33.75,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ Grey \/ Screwless","offer_id":51550390780150,"sku":"APL399782-V1","price":36.0,"currency_code":"USD","in_stock":true},{"title":"With Cover \/ White \/ Screwless","offer_id":51550390812918,"sku":"APL399782-V75","price":36.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Grey \/ Screwless","offer_id":51550390845686,"sku":"APL399782-V6","price":28.0,"currency_code":"USD","in_stock":true},{"title":"With Cover \/ Silver \/ Screwless","offer_id":51550390878454,"sku":"APL399782-V8","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ Grey \/ Screwless","offer_id":51550390911222,"sku":"APL399782-V10","price":33.75,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ White \/ Screws","offer_id":51550390943990,"sku":"APL399782-V9","price":36.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ White \/ Screwless","offer_id":51550390976758,"sku":"APL399782-V29","price":28.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Silver \/ Screwless","offer_id":51550391009526,"sku":"APL399782-V0","price":30.5,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Grey \/ Screws","offer_id":51550391042294,"sku":"APL399782-V4","price":28.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ White \/ Screws","offer_id":51550391075062,"sku":"APL399782-V5","price":29.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312308_apl399782.jpg?v=1787793097"},{"product_id":"apl946532","title":"Vimar Idea\/8000 IP40 Surface Enclosure, 2 Modules, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar IP40 surface mounting box is a 2-module enclosure for Idea modules or 2 8000 special modules, with versions in ivory or grey. It is made from plastic, uses full insulating materials, and includes 2 adaptors 08491 for 8000 standard modules.\u003c\/p\u003e\u003cp\u003eOn a boat, this type of enclosure works well where you need a clean surface-mounted switch point instead of cutting a recess into a bulkhead or panel. IP40 makes it a better fit for interior areas that stay protected, such as cabins, nav stations, console interiors, and service spaces behind doors or panels, rather than exposed deck locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module surface enclosure for Vimar Idea modules or 2 Vimar 8000 special modules\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 adaptors 08491 for installations using 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eIP40 enclosure rating for interior installations where direct spray and washdown are not expected\u003c\/li\u003e\n\u003cli\u003ePlastic housing with full insulating materials\u003c\/li\u003e\n\u003cli\u003eCompact enclosure format, approximately 68 x 93 x 56 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in more than one colour configuration.\u003c\/p\u003e\u003cp\u003eThe listed versions differ by colour. The enclosure format stays at 2 modules with IP40 protection across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM13023.A, Color Ivory. This version suits lighter switch trims and interiors where a softer finish blends in more easily.\u003c\/li\u003e\n\u003cli\u003eVM13023, Color Grey. This version has a more neutral technical look that sits well on darker panels and utility spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check the module family already installed on the vessel. This box accepts 2 Idea modules directly, or 2 8000 special modules. Where the installation uses 8000 standard modules, the supplied 08491 adaptors are part of the fit.\u003c\/p\u003e\u003cp\u003eThat makes it useful for refit work as well as small repairs, especially on boats where older switch locations may already use Vimar components from the Idea or 8000 range.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eBecause it is a surface enclosure, it is useful where there is not enough depth for a flush box behind the panel. That can simplify work on finished joinery, fiberglass liners, and retrofit panels where access behind the mounting surface is limited.\u003c\/p\u003e\u003cp\u003eThis is a sensible choice for owners, electricians, and yards who need a tidy 2-module box in a protected onboard location and want to stay within the Vimar Idea or 8000 ecosystem.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550392746230,"sku":"APL946532-V5","price":5.0,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550392778998,"sku":"APL946532-V6","price":5.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364043_apl946532_jpeg.jpg?v=1787793163"},{"product_id":"apl289276","title":"Vimar Plana 2P+E French SICURY Socket Outlet, 16A, 250V, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2P+E French SICURY outlet range for flush-mounted AC installations that use the French socket format. It is rated 16 A at 250 V, works at 50 to 60 Hz, and uses a 2-module layout, which makes it easy to match with other Plana devices in a finished interior.\u003c\/p\u003e\u003cp\u003eThe body is made from halogen-free thermoplastic with a glossy surface, and the device measures 44.8 x 49.0 x 35.9 mm. Enhanced contact protection is built in, and the IP20 rating makes this a fit for protected indoor spaces rather than exposed areas on deck.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this outlet suits cabins, saloons, galleys, and other dry accommodation spaces where a French standard receptacle is needed and the installation is already based around Vimar Plana components.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFrench standard 2P+E outlet rated 16 A, 250 V AC, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003e2-module Plana format for flush-mounted installations\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection built into the outlet\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a glossy finish\u003c\/li\u003e\n\u003cli\u003eCompact 44.8 x 49.0 x 35.9 mm size for panel and box clearance checks\u003c\/li\u003e\n\u003cli\u003eRange includes white or silver finish, versions with or without cover, and screwed or screwless terminal options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eAcross the listed configurations, the differences are finish, front cover, and terminal style. The range is available in white or silver, with or without a cover, and with either screwed terminals or screwless push-in clamp terminals.\u003c\/p\u003e\u003cp\u003eOne white version adds antibacterial treatment. Across the range, the core outlet format stays the same: 2P+E French standard, 16 A, 250 V, 50 to 60 Hz, flush-mounted, and built as a 2-module device.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is part of the Vimar Plana device family, so it is intended for Plana modular installations and a 2-module opening. The compact body helps when checking available depth behind cabin liners, furniture panels, or interior bulkheads.\u003c\/p\u003e\u003cp\u003eBecause protection is IP20, it belongs in dry interior locations. It is not intended for cockpits, exterior helm stations, wet lockers, or other places that see spray, washdowns, or direct weather exposure.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eScrewed-terminal versions use conventional conductor termination, while the screwless versions use push-in clamp terminals. Versions with cover add a protective front flap over the socket face when the outlet is not in use.\u003c\/p\u003e\u003cp\u003eThis range is a good match for boats already laid out with French standard AC outlets and for refit work where the goal is to keep the same Vimar Plana look across switches, sockets, and other interior electrical devices.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Screwless \/ No Cover","offer_id":51550396186870,"sku":"APL289276-8","price":15.75,"currency_code":"USD","in_stock":false},{"title":"White \/ Screwless \/ With Cover","offer_id":51550396219638,"sku":"APL289276-5","price":20.0,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screws \/ No Cover","offer_id":51550396252406,"sku":"APL289276-0","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White\/Antibacterial \/ Screws \/ No Cover","offer_id":51550396285174,"sku":"APL289276-1","price":17.25,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screws \/ With Cover","offer_id":51550396317942,"sku":"APL289276-7","price":24.75,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screwless \/ With Cover","offer_id":51550396350710,"sku":"APL289276-9","price":24.75,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screwless \/ No Cover","offer_id":51550396383478,"sku":"APL289276-3","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Screws \/ No Cover","offer_id":51550396416246,"sku":"APL289276-4","price":16.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Screws \/ With Cover","offer_id":51550396449014,"sku":"APL289276-2","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828827_apl289276.jpg?v=1787793221"},{"product_id":"apl210018","title":"BEP SPDT Rocker Switch - 2-LEDs - 12V\/24V - ON\/OFF\/ON 1001715","description":"\u003cp\u003e\u003cstrong\u003eSPDT Rocker Switch - 2-LEDs - 12V\/24V - ON\/OFF\/ON\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, double throw switch turns one of two circuits on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two LEDs\u003c\/li\u003e\n\u003cli\u003eThe nominal voltage is 12V DC\u003c\/li\u003e\n\u003cli\u003eRated for 25A at 12V DC\u003c\/li\u003e\n\u003cli\u003eFour 1\/4\" blade terminals\u003c\/li\u003e\n\u003cli\u003eSnap-in mounting to fit panel hole 1.45\" x .83\" into panels .093\" to .187\" thick\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number 58327-06\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550397956342,"sku":"APL210018","price":17.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1100748_apl210018jpg.jpg?v=1787793310"},{"product_id":"apl589135","title":"Vimar ARKÉ F Type Female Socket Connector, 2400 MHz, IEC 60169-24","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series is a range of F-type female socket connectors used to terminate coaxial TV and satellite lines in a fitted wall plate or panel. Each version uses an IEC 60169-24 F-type female connection and handles frequencies up to 2400 MHz.\u003c\/p\u003e\u003cp\u003eThis is a single-outlet end socket with support for remote power supply through the coax line. The insert body measures 22.2 x 49 x 30 mm and mounts by snap engagement, which helps keep the installation neat inside a compatible ARKÉ layout.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this type of insert fits best in protected spaces such as cabins, saloons, and helm consoles where a coax feed needs a clean finished outlet instead of a loose cable end. It is a practical match for onboard TV and satellite distribution where an F-type male connector is already part of the wiring plan.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIEC 60169-24 F-type female coaxial connection for TV and satellite signal points\u003c\/li\u003e\n\u003cli\u003eRated for frequencies up to 2400 MHz\u003c\/li\u003e\n\u003cli\u003eSingle-outlet end socket format\u003c\/li\u003e\n\u003cli\u003eSuitable for remote power supply through the coax line\u003c\/li\u003e\n\u003cli\u003eSnap-mount engagement for quick fitting into the ARKÉ device system\u003c\/li\u003e\n\u003cli\u003e22.2 x 49 x 30 mm insert size across the listed finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple finish configurations within the same connector format.\u003c\/p\u003e\u003cp\u003eAcross the listed versions, the connector type, frequency limit, single-outlet layout, remote power compatibility, snap-mount format, and body size remain the same. What changes between variants is the visible finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19318 - Grey, RAL 7015. This version suits installations built around darker grey ARKÉ trim and keeps the outlet visually discreet on bulkheads and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM19318.M - Metal, aluminium tone, RAL 9007. This version changes the visible look to a metallic finish while keeping the same connector layout and installation format.\u003c\/li\u003e\n\u003cli\u003eVM19318.B - White, RAL 9016. This version works well where the surrounding trim and panel hardware are finished in white and a lighter face is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis insert is part of the ARKÉ range, so it should be matched with the correct system components for the final installation. The coax line connects through an F-type male connector, which should be checked before ordering if the boat is being refitted from another connector style.\u003c\/p\u003e\u003cp\u003eBecause this is a flush device insert rather than a standalone deck fitting, it makes the most sense where the coax run is already routed behind a finished panel. That is usually the case in entertainment panels, cabin joinery, and helm stations with built-in electronics.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis socket is intended for coaxial signal runs that use the F-type format and is commonly used for TV and satellite distribution. It is a sensible choice for boats that need a tidy signal outlet at the point of use without changing the appearance of the surrounding electrical accessories.\u003c\/p\u003e\u003cp\u003eIt is especially relevant for refit work where matching the finish of the interior switches and sockets matters, but the signal side still needs a proper high-frequency coax connection.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550397989110,"sku":"APL589135-8","price":16.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550398021878,"sku":"APL589135-5","price":16.0,"currency_code":"USD","in_stock":false},{"title":"Metal","offer_id":51550398054646,"sku":"APL589135-0","price":17.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828204_apl589135.jpg?v=1787793298"},{"product_id":"apl542577","title":"Vimar 8000 Series Cord-Operated Push Button, 1P NO, 10A 250V, 1.5 m Cord, IP40, White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08270 is a 1-pole, normally open cord-operated momentary push button rated 10 A at 250 V~ for flush-mounted installations. It gives you a quick pull-to-activate contact, with a 1.5 m cord so the control point can be reached from a berth, locker opening, heads area, or any spot where a standard wall button is awkward.\u003c\/p\u003e\u003cp\u003eThis is an IP40 device, so it belongs in dry, protected interiors rather than exposed cockpits or washdown zones. On board it is typically used as a momentary control input for a relay, controller, bell, or signaling circuit where you want the circuit to close only while the cord is pulled.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt white finish (RAL 9001) and includes a label area, which helps keep panels and service points readable when multiple controls are grouped together.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMomentary 1P\/NO contact (circuit closes only while operated)\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A, 250 V~\u003c\/li\u003e\n\u003cli\u003e1.5 m operating cord for remote, easy-to-reach activation\u003c\/li\u003e\n\u003cli\u003eFlush-mounted device with snap (engage) fastening\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for sheltered interior locations\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt white finish (RAL 9001)\u003c\/li\u003e\n\u003cli\u003eOverall size: 22.00 mm wide, 50.10 mm high, 35.00 mm deep\u003c\/li\u003e\n\u003cli\u003eLabel space on the front for clear circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan for a flush-mount position with enough clearance behind the surface for the 35.00 mm device depth and for bending the conductors without stress. If you are mounting into joinery or a thin liner, make sure the backing structure supports the module so it does not flex when the cord is pulled.\u003c\/p\u003e\u003cp\u003eRoute the cord so it moves freely and does not chafe on edges or snag on gear. On a boat, that usually means keeping it away from hatch corners, locker lids, and moving seat bases, and leaving a clean path that stays predictable underway.\u003c\/p\u003e\u003ch6\u003eElectrical and onboard use\u003c\/h6\u003e\u003cp\u003eWire it as a normally open momentary contact in the control circuit you are switching. For DC onboard systems, it is often used to trigger a relay or control input rather than switching heavy DC loads directly, which helps keep arcing and heat out of the switch location.\u003c\/p\u003e\u003cp\u003eConfirm the circuit load and protection match the device rating, and use marine-appropriate conductors, terminations, and strain relief for vibration. If the control is near damp spaces, place it where it stays dry and where condensation or drips cannot run into the module.\u003c\/p\u003e\u003ch6\u003eWhere it works best on board\u003c\/h6\u003e\u003cp\u003eThis style of pull-cord momentary button makes sense in cabins, heads compartments, closets, and under-counter spaces where you want a simple, reachable call or trigger point. It is also useful at service access points where you want a quick, labeled momentary control without adding a bulky panel switch.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the front surface with a lightly damp cloth and avoid harsh solvents that can haze plastics. Periodically check that the cord runs smoothly and that the mounting remains tight after seasons of vibration and temperature cycling.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550399201526,"sku":"APL542577","price":27.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826840_apl-b7x-qgc-uhr.jpg?v=1787793394"},{"product_id":"apl150004","title":"Vimar LED Driver, 12\/24V DC, Constant Voltage, 24W, IP20, Dimmable with MASTER Dimmers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar LED driver is a constant-voltage power supply for 12V and 24V LED strip modules, with versions for either 230V 50Hz or 120V 60Hz input. It works with MASTER dimmers and delivers up to 1,700 mA with output power around 24 W, which makes it suitable for compact onboard strip-light circuits where smooth dimming and a steady low-voltage output matter.\u003c\/p\u003e\u003cp\u003eThe housing is IP20 with Protection Class II, so it belongs in a dry interior mounting position such as behind a panel, inside joinery, or in a protected locker rather than on deck or in any washdown area. This unit is for constant-voltage LED strip modules, not for 230V LED lamps, constant-current loads, or 0-10V and 1-10V ballast systems.\u003c\/p\u003e\u003cp\u003eFor boats, it makes the most sense where the lighting run is fed from the vessel's AC side, whether that comes from shore power, a generator, or an inverter. The long, low-profile body measures 218 x 60.5 x 36.6 mm, which helps when space is limited behind interior panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConstant-voltage output for 12V or 24V LED strip modules\u003c\/li\u003e\n\u003cli\u003eVersions available for 230V 50Hz or 120V 60Hz AC input\u003c\/li\u003e\n\u003cli\u003eOutput current up to 1,700 mA with output power around 24 W\u003c\/li\u003e\n\u003cli\u003eCompatible with MASTER dimmers for dimmable lighting circuits\u003c\/li\u003e\n\u003cli\u003eIP20 plastic housing with Protection Class II for dry interior installation\u003c\/li\u003e\n\u003cli\u003e218 x 60.5 x 36.6 mm form factor for tight service spaces behind panels or cabinetry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two input-power configurations for different AC systems on board.\u003c\/p\u003e\u003cp\u003eAcross both versions, the output side remains the same with 12V to 24V constant-voltage operation, output current up to 1,700 mA, output power around 24 W, IP20 protection, Protection Class II, and the same overall dimensions. The change between variants is the primary input voltage and frequency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM01874: 230V, 50Hz input. This version suits vessels and dockside electrical systems built around 230V AC service.\u003c\/li\u003e\n\u003cli\u003eVM01874.120: 120V, 60Hz input. This version matches boats and shore-power installations that use 120V AC service at 60Hz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore fitting the driver, match the input version to the boat's AC supply and confirm that the LED strip modules are designed for constant-voltage operation on a 12V or 24V DC lighting circuit. Because the enclosure is IP20, mount it where it stays dry and where routine access is still possible for service work.\u003c\/p\u003e\u003cp\u003eIts slim length can be useful behind interior liners, inside lockers, or in cabinet voids, but it still needs a clean mounting surface and sensible cable routing. On refit jobs, it is worth checking that the existing dimming control is a compatible MASTER dimmer before treating it as a direct swap.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis driver is a good match for interior strip-light installations in cabins, companionways, saloons, and similar protected spaces where AC power is already available on board. It is less suitable for open deck lighting, exposed lockers, or circuits that depend on direct DC input on the primary side.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"120V 60Hz","offer_id":51550399332598,"sku":"APL150004-V2","price":199.0,"currency_code":"USD","in_stock":false},{"title":"230V 50Hz","offer_id":51550399365366,"sku":"APL150004-V1","price":206.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1267845_apl150004.jpg?v=1787793371"},{"product_id":"apl854976","title":"Vimar Eikon Neutral Double Indicator Unit, 250V, IP40, 1-Module, Flush-Mount, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon neutral double indicator unit is a 1-module flush-mount insert for two signalling units, with neutral diffusers and a 250 V nominal rating. It is supplied without the signalling unit, so it is the front indicator body rather than a complete illuminated assembly.\u003c\/p\u003e\u003cp\u003eThis range fits Eikon modular switching layouts where a compact visual indicator is needed on a panel, bulkhead, or interior control point. The housing is thermoplastic, halogen-free, and finished in matt plastic, with an IP40 rating and snap-in fastening for straightforward integration into the matching support and cover system.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in protected interior locations such as cabin switch panels, technical spaces, or enclosed helm areas where you want a clean indicator position within a Vimar Eikon installation. Because it is IP40, it is better suited to dry or lightly protected spaces rather than exposed deck or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDouble indicator unit format for 2 signalling units with neutral diffusers\u003c\/li\u003e\n\u003cli\u003e1-module Eikon device body for compact use in modular switch panels\u003c\/li\u003e\n\u003cli\u003e250 V nominal rating for systems built around this voltage class\u003c\/li\u003e\n\u003cli\u003eFlush-mounted design with snap fastening for a tidy panel finish\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eSupplied without signalling unit, which matters when matching the insert to the rest of the switching assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three finish options within the same Eikon neutral double indicator unit format.\u003c\/p\u003e\u003cp\u003eThe variant change is the visible finish and colour. The functional layout remains the same across the range where confirmed, including the 1-module body, double indicator format for 2 signalling units, flush mounting, IP40 protection, and 250 V nominal rating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20388.B, white. This version suits switch panels and interior trim where a lighter finish is already used across the cabin or service area.\u003c\/li\u003e\n\u003cli\u003eVM20388.N, silver. This finish gives the indicator a more metallic look and works well where the surrounding Eikon hardware uses the Next silver style.\u003c\/li\u003e\n\u003cli\u003eVM20388, grey. This option keeps the same function with a darker neutral appearance that blends more easily into grey switch surrounds and technical panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis insert is made for flush mounting and uses snap engagement, so fit depends on using the correct Eikon support and finishing parts around it. It occupies one module position and is intended for installations already built around the Vimar modular switching system.\u003c\/p\u003e\u003cp\u003eBecause the light source is not included, the assembly should be planned as part of the full switch and indicator setup rather than as a stand-alone part. That is the main point to check before ordering, especially when replacing a single insert in an existing panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refit and new-build interiors that use Vimar switching in accommodation spaces, enclosed helm stations, or utility areas where panel appearance matters as much as fit. It is especially useful when you need a double indicator position without giving up extra module space.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550399496438,"sku":"APL854976-V0","price":28.33,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550399529206,"sku":"APL854976-V8","price":27.25,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550399561974,"sku":"APL854976-V9","price":32.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363810_apl854976_jpeg.jpg?v=1787793415"},{"product_id":"apl708536","title":"RIGID Industries - 3 Position Rocker Switch - Red","description":"\u003cp\u003eThe 3 Position Rocker Switch in Red is a versatile and visually appealing switch that complements any RIGID lighting system. It features a lighted cherry rocker with a protective rubber boot, ensuring durability and easy operation. With three positions available, you can choose between ON, OFF, or Auto mode, which activates the lights when the vehicle is in reverse.\u003c\/p\u003e\n\u003cp\u003eTo install this switch, a 1\" hole is required for mounting. Its compact size and user-friendly design make it a convenient choice for integrating into your lighting setup. Please note that this product is sold inpidually, allowing you to customize the number of switches based on your specific needs and preferences. Enhance your RIGID lighting system with this reliable and stylish 3 Position Rocker Switch.\u003c\/p\u003e","brand":"RIGID Industries","offers":[{"title":"Default Title","offer_id":51550400020726,"sku":"APL708536","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0367948_apl708536_jpeg.jpg?v=1787793433"},{"product_id":"apl678969","title":"Vimar Rectangular Flush Mounting Box, 6-7 Module, For Masonry Walls, 174 x 59 mm, 50 mm Internal Depth, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM71306.AU is a flush-mount box with a rectangular 6 to 7-module format, finished in black, used behind device supports and cover plates for a clean recessed installation. The body measures 174 mm wide by 59 mm tall and gives about 50 mm of internal depth for wiring.\u003c\/p\u003e\u003cp\u003eIt has nine break-out inlets with knockouts sized for 20 mm or 25 mm conduit, so you can route cables neatly through a bulkhead or cabinet side and keep strain off the terminals. Switching equipment mounts by screws, and the box is supplied without screws and without a cover.\u003c\/p\u003e\u003cp\u003eThe housing is plastic that is halogen-free and tested to a 960 C glow-wire rating. The box carries an IP00 rating, so it is not a watertight enclosure and belongs in protected interior locations on board, behind the finished plate.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUnified 6 to 7-module recessed box format for wall-plate installations\u003c\/li\u003e\n\u003cli\u003e174 mm x 59 mm body size with about 50 mm internal depth for wiring space\u003c\/li\u003e\n\u003cli\u003eNine break-out cable entries with knockouts for 20 mm or 25 mm conduit\u003c\/li\u003e\n\u003cli\u003eRear entry option for bringing wiring straight in from behind the panel\u003c\/li\u003e\n\u003cli\u003eProvision for a dividing screen via the internal rack (divider sold separately)\u003c\/li\u003e\n\u003cli\u003eConnectable box body for building multi-gang runs with coupling accessories\u003c\/li\u003e\n\u003cli\u003eSupport screw lugs have zinc plating to help keep threads clear during installation\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic with a 960 C glow-wire test rating; IP00 enclosure rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for installations based on the Italian 6 to 7-module standard. Confirm your device support and cover plate are sized for a 6M or 7M opening and that your mounting surface has enough depth behind it to accommodate the box and cable bend radius.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLay out cable routing before setting the box, then open only the knockouts you need to keep the fit tight around conduit or looms. When wiring comes from behind, using the rear entry helps reduce crowding at the sides. Since devices mount by screws, make sure the correct screws are available for the support you are installing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of recessed back box is a good match for cabins, enclosed consoles, and interior joinery where switches and outlets need a flush finish and protection from bumps. Keep it out of areas exposed to washdowns or spray, and rely on the fitted device and cover plate for the finished front surface.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550407065846,"sku":"APL678969","price":19.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0368804_apl678969_jpeg.jpg?v=1787793720"},{"product_id":"apl104539","title":"Lunasea - RGBW Handheld 4-Zone Controller - Color Wheel, 4 Memories, Batteries \u0026 Holder","description":"\u003ch4\u003eMaster Your Marine Lighting: Lunasea RGBW Handheld 4-Zone Controller\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eUnleash a Spectrum of Colors with Precision Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the Lunasea RGBW Handheld 4-Zone Controller, an innovative device designed to revolutionize the way you light your marine environment. This full-color mixing RGBW transmitter allows you to seamlessly blend over a million colors, providing unparalleled customization and control over your vessel's ambiance. Whether you're setting the mood for a calm evening at sea or a lively gathering on deck, this controller offers individual or combined control of each color, along with easy dimming options. Capable of managing up to four distinct zones, it can be linked to numerous receivers per zone, ensuring your entire vessel is illuminated exactly to your liking.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtensive Reach: Operates effectively within a 20-meter range\u003c\/li\u003e\n\u003cli\u003eIntuitive Operation: Reliable touch controls for color change and dimming\u003c\/li\u003e\n\u003cli\u003eUser-Friendly: Powered by standard AAA batteries for convenience and ease of use\u003c\/li\u003e\n\u003cli\u003eVersatile Compatibility: Designed to control Lunasea's latest generation LED RGBWW recessed lights\u003c\/li\u003e\n\u003cli\u003eMemory Function: Stores up to four color settings for quick access to your favorite ambiance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Innovations for Enhanced Experience\u003c\/h4\u003e\n\u003cp\u003eDive into the technical brilliance that sets the Lunasea RGBW Handheld 4-Zone Controller apart. This device is not just a remote; it's a gateway to creating the perfect marine setting. With its color wheel, you can fine-tune shades to fit every occasion, while the four memory slots allow you to save and recall your preferred settings with the touch of a button.\u003c\/p\u003e\n\u003ch4\u003eDesigned for the Discerning Mariner\u003c\/h4\u003e\n\u003cp\u003eCompact, efficient, and incredibly easy to use, the controller's design prioritizes both functionality and aesthetics. It comes complete with batteries and a holder, ensuring it's always ready when inspiration strikes. The ability to control multiple zones simultaneously or independently offers flexibility in lighting design that's unmatched.\u003c\/p\u003e\n\u003ch4\u003eIlluminate Your Voyage with Precision and Style\u003c\/h4\u003e\n\u003cp\u003eThe Lunasea RGBW Handheld 4-Zone Controller is more than an accessory; it's an essential tool for those who demand excellence and precision in their marine lighting solutions. Elevate your lighting game, set the scene for any event, and navigate the waters with confidence and flair. With Lunasea, the power to craft your perfect marine environment is firmly in your hands.\u003c\/p\u003e","brand":"Lunasea Lighting","offers":[{"title":"Default Title","offer_id":51550408147190,"sku":"APL104539","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0705947_apl104539.jpg?v=1787793778"},{"product_id":"apl324826","title":"Vimar By-me Plus PLANA 1-Module Relay Actuator, 6A, 120-230V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series 1 Module Relay Actuator is a flush-mounted By-me Plus bus actuator with a 6 A change-over relay output for 120-230 V circuits. It takes one module position in the Plana range, includes LED indication, and comes with bus connection.\u003c\/p\u003e\u003cp\u003eOn board, this type of module fits best behind interior control points where space is limited and the installation already uses the Vimar By-me Plus system. Its IP40 rating makes it more appropriate for cabins, saloons, enclosed helm areas, and other sheltered spaces than for open deck or washdown locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 A change-over relay output for 120-230 V circuits within the device rating\u003c\/li\u003e\n\u003cli\u003eFlush-mounted format that takes one module position in a Plana installation\u003c\/li\u003e\n\u003cli\u003eWorks on the Vimar By-me Plus bus and includes bus connection\u003c\/li\u003e\n\u003cli\u003eLED indication on the module for status visibility at the panel\u003c\/li\u003e\n\u003cli\u003eSuitable for C-loads with one switching contact\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two finish options within the same relay actuator format.\u003c\/p\u003e\u003cp\u003eThe finish changes between variants. The electrical rating, mounting method, module width, bus connection, LED indication, C-load suitability, and IP40 protection remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14534: White finish. This version keeps a white look that matches white Plana switch positions and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM14534.SL: Silver finish. This version keeps the same actuator specification with a silver front for installations that use silver Plana trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis actuator is made for flush mounting and takes one module position, which helps when panel space is tight. It is a bus device rather than a stand-alone wall switch, so it belongs in a Vimar By-me Plus installation with the right programming and system layout.\u003c\/p\u003e\u003cp\u003eThere is no local hand operation on the module. That matters in service areas or technical spaces where direct manual override at the device may be part of the design, because control is expected to come through the bus system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit suits boats that already use Vimar Plana controls and need a compact relay point for an AC circuit inside the accommodation or other enclosed areas. It is a better fit for interior joinery, protected helm panels, or service spaces than for exposed mounting points.\u003c\/p\u003e\u003cp\u003eDifferent phases are not connectable on this actuator, so that point should be checked early in a refit or new installation when matching the device to the boat's distribution layout and the function assigned in the control system.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550410735862,"sku":"APL324826-1","price":153.86,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550410768630,"sku":"APL324826-8","price":156.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827772_apl324826.jpg?v=1787793959"},{"product_id":"apl493232","title":"Uflex Single Lever Top Mount Control w\/Neutral Lock - No Trim Switch - Chrome B501CH\/L","description":"\u003cp\u003e\u003cb\u003eSingle Lever Top Mount Control w\/Neutral Lock - No Trim Switch - Chrome\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eIn the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever \/ dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I\/O power plants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnables easy and safe shifting by preventing accidental gear engagement unless engine is idling\u003c\/li\u003e\n\u003cli\u003eChrome plated high resistance ABS housing control with die cast chrome plated levers\u003c\/li\u003e\n\u003cli\u003ePush in button disengages shift for warm-up\u003c\/li\u003e\n\u003cli\u003eX12 neutral safety switch which prevents in-gear starting (optional)\u003c\/li\u003e\n\u003cli\u003eExceeds EN ISO 11547 standards when X12 safety switch is installed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFor use with all Ultraflex control cables except C4:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eC14 and MACH14 cables require no kit\u003c\/li\u003e\n\u003cli\u003efor C2, C8 and MACHZero cables the connection kit K59 - 40144C is included\u003c\/li\u003e\n\u003cli\u003eC5, C16 and MACH5 cables require K60 Kit - 40145E\u003c\/li\u003e\n\u003cli\u003eC36 and MACH36 cables require K62 Kit - 40157J\u003c\/li\u003e\n\u003cli\u003eC22 cable requires K61 Kit - 40146G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uflex USA","offers":[{"title":"Default Title","offer_id":51550412538102,"sku":"APL493232","price":642.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1105938_apl493232jpg.jpg?v=1787794075"},{"product_id":"apl577989","title":"Vimar 8000 Series 2-Module Cover Plate, 60 mm Round Mounting Box, Screw Mounting, Anodized Aluminium","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 8000 Series is a 2-module cover plate for ø 60 mm round mounting boxes, used to finish a Vimar 8000 wiring device neatly on a bulkhead or interior panel.\u003c\/p\u003e\u003cp\u003eIt mounts with screws and can be oriented horizontally or vertically. The plate is anodized aluminium with a matt finish and measures 79.50 mm x 79.50 mm with a 6.00 mm depth.\u003c\/p\u003e\u003cp\u003eProtection rating is IP00, so it belongs in dry, sheltered locations, or behind a door or cover if the area sees spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module cover plate for ø 60 mm round mounting boxes when paired with Vimar mounting frame 08502\u003c\/li\u003e\n\u003cli\u003eScrew fixing for a secure fit on panels that see vibration underway\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical mounting to suit the box orientation and layout\u003c\/li\u003e\n\u003cli\u003eAnodized aluminium with a matt finish for a clean, low-glare look\u003c\/li\u003e\n\u003cli\u003eOverall size: 79.50 mm x 79.50 mm; depth: 6.00 mm\u003c\/li\u003e\n\u003cli\u003eIP00 rating (not sealed)\u003c\/li\u003e\n\u003cli\u003eHalogen-free construction\u003c\/li\u003e\n\u003cli\u003eLabel space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eOffered in two finishes to match surrounding hardware and interior trim.\u003c\/p\u003e\u003cp\u003eBoth versions share the same 2-module layout for ø 60 mm round boxes and use screw fixing; the difference is the visible color finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM08506.BR (Color: Bronze). Bronze tone similar to RAL 1036 for darker metal accents and warm wood interiors.\u003c\/li\u003e\n\u003cli\u003eVM08506 (Color: Gold). Gold tone similar to RAL 1035 for a lighter anodized look in bright cabins and consoles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFits ø 60 mm round mounting boxes when used with the matching Vimar mounting frame 08502. The opening pattern is for a 2-module Vimar 8000 configuration, so confirm your inserts and frame match the 8000 module system before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSet the mounting frame so it sits flat on the box, then position the cover plate and tighten the fixing screws evenly until snug. On boats, avoid over-tightening on thin liners and re-check fasteners after the first few trips if the panel is in a high-vibration area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon locations include cabins, nav stations, galleys, heads, and protected cockpit consoles where Vimar 8000 switches or sockets are installed. It is a straightforward way to keep a uniform faceplate size and finish across a refit or new panel build.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild soap as needed, then rinse with fresh water after salty trips. Skip abrasive pads and aggressive cleaners so the matt anodized finish keeps its look.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gold","offer_id":51550413783286,"sku":"APL577989-V2","price":6.65,"currency_code":"USD","in_stock":false},{"title":"Bronze","offer_id":51550413816054,"sku":"APL577989-V1","price":8.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312269_apl577989.jpg?v=1787794147"},{"product_id":"apl208951","title":"BEP 2-Position SPST PVC Coated Push Button Switch - OFF\/(ON) 1001506","description":"\u003cp\u003e\u003cstrong\u003e2-Position SPST PVC Coated Push Button Switch - OFF\/(ON)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSingle pole, single throw switch turns one circuit on and off. Can be used for any single circuit requiring an On-Off style switch. PVC coated to help protect against moisture and dirt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement cap 1001501\u003c\/li\u003e\n\u003cli\u003eNominal voltage is 6-36V DC\u003c\/li\u003e\n\u003cli\u003eRated for 10A at 12V DC\u003c\/li\u003e\n\u003cli\u003eTwo 8\" 16 AWG wire leads\u003c\/li\u003e\n\u003cli\u003eSame as Cole Hersee part number M-608\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"BEP Marine","offers":[{"title":"Default Title","offer_id":51550427382006,"sku":"APL208951","price":51.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1095161_apl208951jpg.jpg?v=1787794447"},{"product_id":"apl337923","title":"Vimar By-me Plus Line Coupler, 29V Nominal Supply, DIN Rail TH35, Electrical Isolation, Message Filtering","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01845.1 is a line coupler used to connect two By-me Plus bus lines while keeping the lines electrically separated. It works on a 29 V bus supply, draws 30 mA, and mounts on a DIN 60715 TH35 (EN 50022) rail, taking up 2 DIN modules (35 mm) in your electrical cabinet.\u003c\/p\u003e\u003cp\u003eOn a boat, this is typically installed in the main distribution panel or an automation cabinet when the bus layout needs two powered sections, or when two lines need to communicate without tying the wiring together directly. The unit must be powered from both sides, so each connected line should have its own bus power available.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCouples two By-me Plus bus lines while maintaining electrical separation between the lines\u003c\/li\u003e\n\u003cli\u003eRated supply voltage: 29 V bus; the device must be powered from both sides\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 30 mA\u003c\/li\u003e\n\u003cli\u003eDissipated power: 800 mW average, 1100 mW maximum\u003c\/li\u003e\n\u003cli\u003eDIN rail mounting on DIN 60715 TH35 (EN 50022); occupies 2 modules of 17.5 mm (35 mm total)\u003c\/li\u003e\n\u003cli\u003eFilters bus traffic so only relevant messages pass between lines, with a manual routing mode available\u003c\/li\u003e\n\u003cli\u003eConfigured using the View Pro app; the Function button supports reset and manual routing functions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis coupler is intended for Vimar By-me Plus bus installations that use a 29 V bus supply. It is not a KNX, KNX-RF, or LON coupler.\u003c\/p\u003e\u003cp\u003eBecause it is a DIN device, it belongs inside a protected electrical cabinet rather than in an exposed location. Plan space for a 2-module unit and leave room for clean cable routing and strain relief, especially in high-vibration installs.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eClip the unit onto a TH35 DIN rail and wire each bus side to match your system topology. In marine panels, keep bus wiring organized and supported so vibration does not work connections loose over time.\u003c\/p\u003e\u003cp\u003eConfiguration is handled through the View Pro app. The Function button provides a reset procedure and a manual mode that routes all messages, with an automatic timeout after 2 hours.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a low-voltage bus device, so treat its cabling and terminations like any other SELV circuit on board. In mixed-voltage cabinets, keep mains conductors (230 V AC) physically separated from SELV wiring to reduce noise pickup and to keep the panel serviceable.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon layouts include splitting an automation backbone between zones such as salon and cabins, or joining a secondary panel into the same By-me Plus system while keeping each side independently powered. It is a practical fit for refits where the bus is being extended into a new area of the vessel and you want clearer segmentation between lines.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550428004598,"sku":"APL337923","price":550.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826646_apl-lyh-jal-e4k.jpg?v=1787794473"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/850c98a9-5dbf-471c-af5d-dbfba1fa07be.webp?v=1790829169","url":"https:\/\/www.apollolighting.com\/collections\/cat-marine-switches.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}