{"title":"Navigation Lights","description":"","products":[{"product_id":"apl034317","title":"Sea-Dog - LED Pop Out Combination Bow Light","description":"\u003ch4\u003eNavigate with Confidence: Sea-Dog LED Pop Out Combination Bow Light\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eInnovative Illumination for Safe Sea Journeys\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmbark on your nautical adventures with the Sea-Dog LED Pop Out Combination Bow Light, a beacon of safety and innovation. This USCG-approved 2 NM (Colreg 2 mile) navigation light is designed for the modern mariner who values efficiency and reliability. With a simple twist, the light pops up to illuminate your path, and when not in use, it discreetly retracts into the deck, preserving the sleek look of your vessel. The corrosion-resistant investment cast stainless steel cap and bezel ensure durability in the harsh marine environment, while the IP67 waterproof rating guarantees performance even in the most challenging conditions. Installation is straightforward with three #10 fasteners (included), making it an essential upgrade for any boat. Ensure your vessel is seen and safe with this innovative lighting solution, designed to provide the correct visual alignment and meet all USCG regulations for navigation lights.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSCG approved for 2 NM (Colreg 2 mile), ensuring compliance with navigation standards\u003c\/li\u003e\n\u003cli\u003eEasy pop-up mechanism for quick illumination and retractable design for a clean deck profile\u003c\/li\u003e\n\u003cli\u003eConstructed with corrosion-resistant stainless steel for extended durability\u003c\/li\u003e\n\u003cli\u003eIP67 waterproof rating, offering protection against water and dust ingress\u003c\/li\u003e\n\u003cli\u003eIncludes three #10 fasteners for hassle-free installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDurability Meets Design: Stainless Steel Construction\u003c\/h4\u003e\n\u003cp\u003eThe Sea-Dog LED Pop Out Combination Bow Light not only offers superior lighting but also boasts a design that withstands the rigors of marine life. The investment cast stainless steel cap and bezel provide robust protection against corrosion, ensuring that your light remains functional and visually appealing for years to come.\u003c\/p\u003e\n\u003ch4\u003eSeamless Installation, Uninterrupted Sailing\u003c\/h4\u003e\n\u003cp\u003eEquipped with everything needed for a smooth installation process, this bow light integrates seamlessly into your boat's design. The inclusion of three #10 fasteners facilitates a secure mount, allowing you to focus on the journey ahead with the assurance that your lighting is reliable and compliant with maritime navigation requirements.\u003c\/p\u003e\n\u003c!-- Variations section would go here if provided --\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":51550281761014,"sku":"APL034317","price":210.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0707537_apl034317.jpg?v=1787789667"},{"product_id":"apl363333","title":"Perko Vertical Mount Stern Light, Chrome Plated Brass, 12V, 2 Mile Visibility, Black Polymer Base","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0945DP0CHR is a vertical-mount stern light for replacement use on sail or power-driven vessels under 20 meters (65.6 ft.) in length. It has a chrome-plated brass top, a black polymer base, gold-plated contacts, and 2-mile visibility.\u003c\/p\u003e\u003cp\u003eIt is supplied with a 12-volt bulb and runs at 10 watts and 0.80 amps. The outside diameter of the base is 2-3\/8 inches and the projection is 1-3\/8 inches, which helps when you are matching an older mounting footprint or working with limited space at the stern.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCertified for replacement use on sail or power-driven vessels under 20 meters (65.6 ft.) in length\u003c\/li\u003e\n\u003cli\u003eChrome-plated brass top with a black polymer base\u003c\/li\u003e\n\u003cli\u003eGold-plated contacts at the socket\u003c\/li\u003e\n\u003cli\u003eSupplied with a 12-volt bulb; 10 watts and 0.80 amps\u003c\/li\u003e\n\u003cli\u003e2-mile visibility for stern-light duty\u003c\/li\u003e\n\u003cli\u003e2-3\/8 inch base outside diameter, 1-3\/8 inch projection, and #4 screw mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light mounts on a vertical surface that sits perpendicular to the boat centerline and faces astern. It uses #4 mounting screws, and the mounting template allows either two 1\/2 inch wiring clearance holes or one 1-3\/8 inch center hole, depending on how the wiring is routed.\u003c\/p\u003e\u003cp\u003eOrientation matters on a stern light. The bulb position is indexed by the arrow molded into the base, and that arrow should point straight up when the light is installed. It suits owners replacing an older bulb-style stern light and wanting to keep the same mounting style instead of reworking the aft structure.\u003c\/p\u003e\u003ch6\u003eElectrical and service\u003c\/h6\u003e\u003cp\u003eThe fixture is supplied with a 12-volt bulb. A matching 24-volt bulb is available for installations that use 24-volt lighting circuits. The bulb, lens, and base and socket assembly are replaceable, which is useful when keeping an older navigation light setup in service.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":51550288609526,"sku":"APL363333","price":89.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322867_apl363333.jpg?v=1787789858"},{"product_id":"apl989987","title":"Navisafe - Navilight - Tricolor, 2NM, w\/Navibolt Base","description":"\u003ch4\u003eDive into Navilight's Luminescent World\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNavilight Tricolor 2NM with Navibolt Base\u003c\/strong\u003e is your go-to portable navigation solution. Seamlessly integrated with the Navisafe Navimount system, it not only offers adaptability but also ensures longevity and sturdiness. This lighting wonder is not just a mount, but a pledge of safety and resilience.\u003c\/p\u003e\n\u003ch4\u003eUnveiling the Nautical Tech Specs\u003c\/h4\u003e\n\u003cp\u003eDesigned with precision and to cater to the most demanding marine conditions, here are the details that make this product stand out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStamped with the US Coast Guard approval for 2 nautical miles\u003c\/li\u003e\n\u003cli\u003eFeatures 5 versatile modes: including Tricolor Masthead light (135x white, 112.5x red, 112.5x green), BiColor side light, and more.\u003c\/li\u003e\n\u003cli\u003eUnique ability to float with the light facing up - ensuring visibility even in the toughest situations\u003c\/li\u003e\n\u003cli\u003eCan bravely submerge up to 20M\/66' without a hiccup\u003c\/li\u003e\n\u003cli\u003ePromise of being corrosion resistant – A true marine companion\u003c\/li\u003e\n\u003cli\u003eEmpowered by three AAA batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIlluminate Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Navisafe Navimount system\u003c\/li\u003e\n\u003cli\u003eGuaranteed durability and strength\u003c\/li\u003e\n\u003cli\u003eSubmersible design for added reliability\u003c\/li\u003e\n\u003cli\u003eUS Coast Guard approved for marine safety\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShades and Hues of Navilight\u003c\/h4\u003e\n\u003cp\u003eWhile the exact color temperature specifications are not provided, we ensure that the emitted light is of optimal brightness and clarity, making your marine journey safe and hassle-free.\u003c\/p\u003e\n\u003ch4\u003eEndless Aesthetic Finishes\u003c\/h4\u003e\n\u003cp\u003eNavilight Tricolor 2NM with Navibolt Base is designed to blend with the marine environment. As we await more details on the available finishes, we're certain that each one will elevate the aesthetics of your vessel.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550307516662,"sku":"APL989987","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698400_apl989987_jpeg.jpg?v=1787790472"},{"product_id":"apl293096","title":"Perko Fold-Down Combination Masthead\/White All-Round Light, Horizontal Mount, 12V, 3NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 1181DP0CHR is a fold-down combination masthead and white all-round light for sail or power driven vessels under 20 meters (65.6 ft.) in length. It combines both light functions in one assembly, carries a 3-mile USCG 3nm rating, and stands 14-1\/4 inches high on a 3\/4 inch anodized aluminum tube.\u003c\/p\u003e\u003cp\u003eThis horizontal-mount version uses a black polymer top and base with a clear polymer lens and gold-plated contacts. The reduced-glare layout helps cut light spill back toward the helm, which matters on night passages where stray light can wear on your eyes.\u003c\/p\u003e\u003cp\u003eFor fit checks, the base measures 2 inches by 1-1\/2 inches with 1-3\/8 inch center-to-center mounting dimensions and a #8 screw size. It comes set up for 12V use with two 10 watt bulbs, and it can be used on a 24V system with the correct 24V bulb change.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCombination masthead and white all-round light with two separate light compartments in one unit\u003c\/li\u003e\n\u003cli\u003e3-mile USCG 3nm certification for vessels under 20 meters (65.6 ft.)\u003c\/li\u003e\n\u003cli\u003eHorizontal fold-down mount with adjustable angle and 90 degree laydown in either direction\u003c\/li\u003e\n\u003cli\u003ePolymer adapters for flat or V-type mounting surfaces, plus a notch for through-base wiring\u003c\/li\u003e\n\u003cli\u003eBlack polymer top and base, clear polymer lens, 3\/4 inch anodized aluminum tube, and gold-plated contacts\u003c\/li\u003e\n\u003cli\u003e12V setup with two included 10 watt bulbs, with 24V use possible when the bulb type is changed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis light is built for horizontal mounting and works well where a fold-down assembly makes more sense than a fixed upright pole. The supplied adapters help it sit properly on flat or V-type surfaces, which is useful around windshield frames and similar mounting points where the base angle matters.\u003c\/p\u003e\u003cp\u003eWire planning is worth checking before installation. When underway, the forward compartment is used as the masthead light with the rest of the running lights, while both compartments are energized together for the white all-round anchor-light function, so the switching arrangement needs to be set up correctly for both modes.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is a good match for small to midsize sailboats and powerboats that need a combined masthead and anchor light in one compact assembly. It suits layouts where mounting space is limited and where a horizontal base is easier to place than a vertical mount.\u003c\/p\u003e\u003cp\u003eCheck clearance for the 14-1\/4 inch overall height when the light is upright and for the 2 inch by 1-1\/2 inch base footprint at the mounting point. That is especially helpful around windshields, rails, canvas, and storage covers where a fold-down light can make day-to-day handling easier.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":51550341169398,"sku":"APL293096","price":100.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0714281_apl293096.jpg?v=1787791447"},{"product_id":"apl517993","title":"Attwood Marine All-Round Deck Mount Light, 12V, Flush Mount, Black Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 5940-7 is an all-round deck-mount navigation light for 12V systems. It has 7-inch leads for wiring, mounts flush to the deck, and uses a bayonet lock so the lens and cover can be removed for lamp service without replacing the whole fixture.\u003c\/p\u003e\u003cp\u003eThis is a low-profile light for boats where a raised base is not wanted. It is commonly used atop the tow point on ski and wakeboard towers, and it also fits other flat mounting spots where a compact all-round light makes more sense than a pole light.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC light with 7-inch leads for a straightforward hard-wired connection\u003c\/li\u003e\n\u003cli\u003eFlush deck-mount body with no raised base, useful where clearance and a clean install matter\u003c\/li\u003e\n\u003cli\u003eBayonet lock holds the lens and cover in place and makes lamp replacement easier\u003c\/li\u003e\n\u003cli\u003eInstalls directly to the mounting surface with two #10 fasteners\u003c\/li\u003e\n\u003cli\u003eBlack housing with a clear lens and an included wedge base lamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light is best suited to a fixed deck or tower surface where the wiring can be brought to the base cleanly. The 7-inch leads work well when the connection point is close to the light or when the wiring is extended below the mounting surface as part of the installation.\u003c\/p\u003e\u003cp\u003eBecause it sits flush, it is a practical choice for spots where a taller light base would be in the way or look out of place. Buyers should confirm a 12V circuit is available and that the chosen mounting location gives the all-round light the clear placement their boat requires.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fits owners setting up a ski boat or wake boat tower and anyone who needs an all-round navigation light in a compact deck-mounted format. It also suits refit work where easy access to the lamp matters and there is not much room for a taller assembly.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550345593078,"sku":"APL517993","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698552_apl517993_jpeg.jpg?v=1787791658"},{"product_id":"apl495277","title":"Hella Marine All-Round Anchor Light, 4 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 995002131 is a 2 nautical mile all-round white anchor light with a black base and a fixed 4 in pole for mounting on a 12V boat. It uses a 12V \/ 10W SV8.5 bulb and carries an IPX6 rating for heavy spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe short pole helps lift the lens above rails and brackets without adding much height, and the non-magnetic construction makes it a sensible choice around compasses and heading sensors. The lens and housing are plastic that resists UV exposure and impacts, and the pole is anodized aluminum for day-to-day saltwater use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 nautical mile all-round white anchor light for true 360 degree visibility\u003c\/li\u003e\n\u003cli\u003e12V operation with a 12V \/ 10W SV8.5 bulb included\u003c\/li\u003e\n\u003cli\u003eFixed 4 in pole with anodized aluminum construction\u003c\/li\u003e\n\u003cli\u003eBase with two countersunk mounting holes, plus stainless steel mounting screws\u003c\/li\u003e\n\u003cli\u003eIPX6 rating for harsh spray and washdowns\u003c\/li\u003e\n\u003cli\u003eNon-magnetic build for installations near compasses and sensors\u003c\/li\u003e\n\u003cli\u003ePlastic lens and housing that resists UV exposure and impacts\u003c\/li\u003e\n\u003cli\u003eMeets IMO COLREG 72, USCG, ABYC A-16, and Maritime NZ requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the base on a flat, horizontal surface where the light has an unobstructed 360 degree view. Common locations include a cabin top, hardtop, radar arch, or aft deck area. Use marine sealant where needed, and confirm the lens sits level so the beam remains even all the way around.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it to a switched 12V DC circuit dedicated to navigation and anchor lighting. The unit is pre-wired with a short lead of about 100 mm, so plan a protected splice or junction inside the mounting surface or in a nearby dry area using marine-grade connections and sealed heat-shrink.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThis style of all-round white light is typically used when the vessel is at anchor or otherwise needs an all-round white navigation signal. It is a good fit for sailboats and powerboats that want a traditional bulb-style anchor light on a short fixed pole for a hardtop or cabin roof install.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAll-round anchor light assembly with fixed 4 in pole and black base\u003c\/li\u003e\n\u003cli\u003e12V \/ 10W SV8.5 bulb\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and bulb replacement\u003c\/h6\u003e\u003cp\u003eRinse salt off the lens after rough weather, and check mounting screws occasionally if the boat sees frequent vibration. If light output drops or the lamp becomes intermittent, inspect the contacts and replace the bulb with the same 12V \/ 10W SV8.5 type.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":51550360797430,"sku":"APL495277","price":48.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0653584_apl495277.png?v=1787792009"},{"product_id":"apl381379","title":"Attwood Marine Incandescent All-Round Folding Pole Light, 54 in, 12V, 2-Pin Locking Collar, Articulating Anti-Glare","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 5340-54-7 is a 54 in. all-round navigation light with a folding pole and articulating anti-glare head. It gives 360 degree white light with 2-mile visibility, uses a 9-watt wedge-base incandescent lamp, and is rated for boats up to 39.4 ft. (12 m) in length.\u003c\/p\u003e\u003cp\u003eThis style of pole light works where the all-round light needs to sit at least 39-3\/8 in. (1 m) above the sidelights but a full-length rigid pole is awkward to store. The removable pole folds in half for stowage, and the articulating head helps keep the light aligned when the base is mounted on a flat or angled surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e54 in. removable pole that folds in half for easier storage between trips\u003c\/li\u003e\n\u003cli\u003e360 degree white all-round light with 2-mile visibility for boats up to 39.4 ft. (12 m)\u003c\/li\u003e\n\u003cli\u003eArticulating head adjusts 15 degrees forward and 15 degrees aft\u003c\/li\u003e\n\u003cli\u003eAnti-glare aperture blocks light 7.5 degrees below horizontal and keeps more of the beam at the horizon and above\u003c\/li\u003e\n\u003cli\u003e2-pin locking collar pole for compatible straight or angled plug-in bases\u003c\/li\u003e\n\u003cli\u003eMid-point hinge uses glass-filled composite construction with sheathed wiring at the fold\u003c\/li\u003e\n\u003cli\u003e9-watt wedge-base incandescent lamp\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light is used as an all-round white light or anchor light in systems that take a removable 2-pin locking collar pole. The 54 in. length is useful on boats with low stern decks or mounting points where a shorter pole would not place the light high enough above the sidelights.\u003c\/p\u003e\u003cp\u003eThe articulating head is helpful when the base is mounted on an angled gunwale or deck cap. It lets the light sit upright without forcing you to change the mounting location. Before ordering, check that your base accepts a 2-pin locking collar pole and that the installed height suits your boat layout.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for runabouts, center consoles, and fishing boats that remove the stern light after use and need a pole that stores more easily in a locker. It also makes sense for boats that are covered or trailered often, where a long one-piece pole is harder to handle and stow.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550374297846,"sku":"APL381379","price":65.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1322510_apl381379.jpg?v=1787792542"},{"product_id":"apl763348","title":"Hella Marine 3562 Port Navigation Light, Incandescent, 12V, 1NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 3562 series Port Navigation Lamp is a red-lens port sidelight for 12V systems with a 1 nautical mile visibility rating.\u003c\/p\u003e\u003cp\u003eIt uses a 12V \/ 10W SV8.5 incandescent bulb and mounts on a vertical surface, with the supply wiring entering through the base plate and a rubber grommet.\u003c\/p\u003e\u003cp\u003eThe housing and lens are plastic that resists UV exposure and impacts. It is non-magnetic, saltwater resistant, and rated IP54 for exposed mounting locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 nautical mile visibility rating with a red lens for port-side navigation\u003c\/li\u003e\n\u003cli\u003e12V \/ 10W SV8.5 incandescent bulb included (non-LED)\u003c\/li\u003e\n\u003cli\u003eVertical surface mount with cable entry through the base plate and rubber grommet\u003c\/li\u003e\n\u003cli\u003eSnap-lock housing so the bulb can be changed without tools\u003c\/li\u003e\n\u003cli\u003eHousing and lens resist UV exposure and impacts\u003c\/li\u003e\n\u003cli\u003eIP54 protection for spray and washdown\u003c\/li\u003e\n\u003cli\u003eNon-magnetic construction for use near compasses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis lamp is offered with two housing color options.\u003c\/p\u003e\u003cp\u003eBoth versions use the same red lens, 1 nautical mile rating, 12V \/ 10W SV8.5 bulb type, vertical surface mounting style, IP54 protection, and the same approvals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e003562035: Product color Black. Black housing blends into dark rails and trim when the light is mounted close to deck level.\u003c\/li\u003e\n\u003cli\u003e003562135: Product color White. White housing matches light-colored cabin sides and arches while keeping the same mounting and wiring layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePort navigation lamp assembly\u003c\/li\u003e\n\u003cli\u003e12V \/ 10W SV8.5 incandescent bulb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount on the port side with the lens facing forward and outboard, and keep it clear of stanchions, canvas, or rub rails that can block the light sector.\u003c\/p\u003e\u003cp\u003eRoute the supply wiring through the base plate and grommet, then connect it to your switched 12V navigation-light circuit using sealed marine connections and heat-shrink protection.\u003c\/p\u003e\u003cp\u003eFor service, open the snap-lock housing, replace the bulb, and make sure the lens and housing are fully seated before heading back out.\u003c\/p\u003e\u003ch6\u003eApprovals and on-board use\u003c\/h6\u003e\u003cp\u003eApprovals include IMO COLREG 72, USCG, ABYC A-16, RINA, and Maritime NZ. This is a good match for yachts and powerboats running a 12V navigation-light circuit that need a dedicated port sidelight with an incandescent bulb you can replace anywhere.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water after salt exposure and wipe the lens clean so the red light stays crisp at night. Periodically check the base grommet and mounting screws, especially on boats that see heavy vibration or regular washdowns.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Black","offer_id":51550374559990,"sku":"APL763348-V4","price":34.27,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550374592758,"sku":"APL763348-V9","price":31.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0362558_apl763348_jpeg.jpg?v=1787792555"},{"product_id":"apl401673","title":"Innovative Lighting Portable LED Bow Light w\/Suction Cup 560-1110-7","description":"\u003cp\u003e\u003cstrong\u003eBattery Navigation Light\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequires 4 AA batteries (not included)\u003c\/li\u003e\n\u003cli\u003eMolded one piece body construction\u003c\/li\u003e\n\u003cli\u003eShock resistant neoprene accents\u003c\/li\u003e\n\u003cli\u003eIncandescent or LED available\u003c\/li\u003e\n\u003cli\u003eRated at 100,000 hours LED service life\u003c\/li\u003e\n\u003cli\u003eLED uses 90% less energy than incandescent\u003c\/li\u003e\n\u003cli\u003eSealed heavy duty on\/off switch\u003c\/li\u003e\n\u003cli\u003eInsert molded brass threaded mounting bushings\u003c\/li\u003e\n\u003cli\u003eRemovable lamp carriage assembly\u003c\/li\u003e\n\u003cli\u003e6.18\" x 2.53\"\u003c\/li\u003e\n\u003cli\u003eMounting Style: Suction Cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Innovative Lighting","offers":[{"title":"Default Title","offer_id":51550380425462,"sku":"APL401673","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1104504_apl401673jpg.jpg?v=1787792807"},{"product_id":"apl846470","title":"Perko 0946 Vertical Mount Stern Light, 12V, Flush Mount, Chrome Bezel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0946DP112V is a flush-mount stern navigation light for boats with a nominal 12 VDC system. It uses a chrome-plated brass bezel with a black polymer base, a clear lens, and an included 12-volt bulb.\u003c\/p\u003e\u003cp\u003eThis stern light is certified for sail or power driven vessels under 20 meters (65.6 ft.) in length with 2-mile visibility. Its compact round housing measures 3 inches outside diameter, 1 inch deep, and 1-15\/16 inches high, so it suits installations where a low-profile light is needed on a vertical aft surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount stern light for a vertical mounting surface facing astern\u003c\/li\u003e\n\u003cli\u003e12-volt bulb included with 10-watt load and 0.74-amp draw\u003c\/li\u003e\n\u003cli\u003eChrome-plated brass bezel with black polymer base\u003c\/li\u003e\n\u003cli\u003eUSCG 2-mile certified for sail or power driven vessels under 20 meters\u003c\/li\u003e\n\u003cli\u003e3 inch outside diameter with 1 inch mounting depth\u003c\/li\u003e\n\u003cli\u003eUses #8 fasteners for installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light belongs in the stern position of a standard navigation-light setup and is a practical match for boats that use a fixed hard-wired aft light instead of a removable pole light. It works well on small cruisers, center consoles, runabouts, and sailboats where the mounting area is vertical and space behind the panel is limited.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the outside footprint, the 1 inch depth behind the mounting surface, and the fastener size at the existing location. That is especially important when replacing an older flush stern light on a transom, aft coaming, or cockpit bulkhead.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe housing is meant to sit flush on a vertical surface that is square to the boat's centerline and faces aft. On a 12-volt navigation-light circuit, this keeps the light in the correct stern position without adding a bracket or pole base above deck level.\u003c\/p\u003e\u003cp\u003eFor boats that live in saltwater, proper bedding around the mounting surface and clean wire terminations matter as much as the light itself. Keeping the lens clean and the bezel free of corrosion buildup helps maintain clear output during night running and low-light returns to the dock.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":51550406541558,"sku":"APL846470","price":105.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0372821_apl846470_jpeg.jpg?v=1787793691"},{"product_id":"apl301499","title":"Navisafe - Navilight 360° - Red, 2NM, w\/Navimount Base \u0026 Rail Mount, White","description":"\u003ch4\u003eNavigate the Night with Precision\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNavilight All RED 360° 2NM with Navimount Base \u0026amp; Rail Mount in Crisp White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExperience the power of all-round navigation with our Navilight, featuring compatibility with both the Navisafe Navimount system and a range of GoPro® \/ Action camera mounts. Opt for a direct mount to the 4-piece-pole or choose your desired GoPro® \/ Action camera mounts for flexibility.\u003c\/p\u003e\n\u003ch4\u003eDeep Dive into Technical Wonders\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOffers 5 versatile Modes including 360°\u003c\/li\u003e\n\u003cli\u003eHas the ability to float with the light facing upwards\u003c\/li\u003e\n\u003cli\u003eImpressive submersion depth up to 20M \/66'\u003c\/li\u003e\n\u003cli\u003eConstructed to resist corrosion effectively\u003c\/li\u003e\n\u003cli\u003eEfficiently powered by three AAA batteries (not part of the package)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMode Mastery: What's Your Pick?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e16 RED LED 360° Constant lights operating for 40 - 45hrs\u003c\/li\u003e\n\u003cli\u003e16 RED LED 360° Flashing lights working for 110 - 115hrs\u003c\/li\u003e\n\u003cli\u003e10 RED LED 225° Forward lights lasting 70 - 75hrs\u003c\/li\u003e\n\u003cli\u003e6 RED LED 135° Stern lights functioning for 95-100hrs\u003c\/li\u003e\n\u003cli\u003e4 RED LED 360° Dim function enduring 125-130hrs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhite Navimount RAIL Mount: Elegance Meets Function\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to effortlessly attach Navilights with Magnetic base, Navimount base, or Suction base onto rails of either 25 or 35mm \/ 1\" or 1-1\/4\".\u003c\/li\u003e\n\u003cli\u003eFor Navilight models 001, 010, 040, 305, 340, the Navisafe converter Navimount \/ 960 is essential.\u003c\/li\u003e\n\u003cli\u003eModels 041 and 341 need no converters and mount directly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVariations to Watch Out For\u003c\/h4\u003e\n\u003cp\u003eAvailable with both the Navimount base and directly without it, our Navilight offers varied mounting options. Whether it's the 4-piece-pole, GoPro® \/ Action camera mounts, or even the Navimount RAIL mount in white - the choice is yours. Tailor your navigation experience to suit your vessel and voyage.\u003c\/p\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550406574326,"sku":"APL301499","price":123.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698407_apl301499_jpeg.jpg?v=1787793694"},{"product_id":"apl842923","title":"Perko 0626 LED Horizontal Mount Side Lights, Red\/Green, 12V, 2nm, Stainless Steel, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0626DP0STS is a pair of red and green LED horizontal mount side navigation lights for power-driven vessels under 20 meters, or 65.6 feet. Each light uses a 12 Volt LED module with a 2.5 watt draw and 0.21 amp current, giving boat owners a low-profile replacement or upgrade for compliant port and starboard side lighting.\u003c\/p\u003e\u003cp\u003eThe lights have a polished stainless steel top with a black polymer base, so they suit exposed deck, bow, and cabin-side mounting areas where spray, sun, and vibration are part of normal use. They are USCG 2 nautical mile certified and meet ABYC C-5, ABYC A-16, EN\/ISO 19009:2015, 1972 COLREGS, RCD 2013\/53\/EU, and USCG 33 CFR requirements.\u003c\/p\u003e\u003cp\u003eWith compact 2-1\/2 inch x 2-3\/4 inch x 1 inch housings, these side lights make sense for center consoles, runabouts, fishing boats, and small cruisers that need a clean horizontal-mount layout without moving to a larger fixture.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of red and green horizontal mount LED side lights for port and starboard navigation lighting.\u003c\/li\u003e\n\u003cli\u003eCertified for power-driven boats under 20 meters, or 65.6 feet, in USA and European markets.\u003c\/li\u003e\n\u003cli\u003eUSCG 2 nautical mile certified for required side light visibility.\u003c\/li\u003e\n\u003cli\u003e12 Volt LED operation with 2.5 watt power use and 0.21 amp current draw.\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel top and black polymer base for a clean look on exposed mounting surfaces.\u003c\/li\u003e\n\u003cli\u003eLow-profile housing measures 2-1\/2 inch x 2-3\/4 inch x 1 inch.\u003c\/li\u003e\n\u003cli\u003eUses #6 mounting screws for installation.\u003c\/li\u003e\n\u003cli\u003eSame footprint perimeter as Perko 0615 and 0616 LED lights, although wiring hole and screw locations may vary.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC C-5, ABYC A-16, EN\/ISO 19009:2015, 1972 COLREGS, RCD 2013\/53\/EU, and USCG 33 CFR standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThese lights are made for horizontal mounting, so they belong on flat or suitably prepared surfaces where the port and starboard lenses can show the correct navigation sectors without obstruction. Before replacing older Perko 0615 or 0616 LED lights, check the existing wiring hole and screw locations against the new fixture, since the footprint perimeter is similar but the mounting details may not be identical.\u003c\/p\u003e\u003cp\u003eThe compact housing helps when space is limited near bow rails, anchor lockers, rub rails, or deck hardware. Use the correct #6 fasteners for the mounting surface and bed the installation properly for the location, especially on cored decks or areas exposed to regular washdowns.\u003c\/p\u003e\u003ch6\u003eElectrical and compliance\u003c\/h6\u003e\u003cp\u003eThis is a 12 Volt LED light set, so it is suited to standard 12V DC boat electrical systems. The LED modules keep current draw low, which is useful on smaller boats where navigation lights may run for long periods during evening returns, early departures, or low-visibility conditions.\u003c\/p\u003e\u003cp\u003eThe 2 nautical mile certification and listed marine lighting standards matter for owners replacing faded, cracked, or outdated side lights. Correct mounting height, orientation, wiring protection, and switch labeling are still part of the installation, so the final setup should be checked as a complete navigation light system rather than as the fixture alone.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of LED horizontal mount side lights.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":51550406803702,"sku":"APL842923","price":251.57,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323135_apl842923.webp?v=1787793707"},{"product_id":"apl368032","title":"Attwood Marine LightArmor Bi-Color Bow Mount Navigation Light, 12V, 2NM, IP67, Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine NV2002SS-7 is a deck-mount bi-color bow navigation light with red and green LEDs, 2 nautical mile visibility, and an IP67 rating. It uses a round 304 stainless steel housing and is rated for boats up to 20 meters (65.6 feet) in length on a 12 VDC system with a 1-amp fuse.\u003c\/p\u003e\u003cp\u003eThis light sits low on the bow and combines port and starboard output in one housing, which helps when space is tight at the stem or when you want a cleaner deck layout than separate side lights. The LED engine is rated for more than 50,000 hours, stays cool in use, and the telltale indicators on top make it easy to confirm that the light is operating before you leave the dock.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBi-color red and green LED bow light in one round deck-mount housing\u003c\/li\u003e\n\u003cli\u003e2 nautical mile visibility for boats up to 20 meters (65.6 feet)\u003c\/li\u003e\n\u003cli\u003e304 stainless steel housing with a polycarbonate lens\u003c\/li\u003e\n\u003cli\u003eIP67-rated construction for spray, rain, and washdowns on deck\u003c\/li\u003e\n\u003cli\u003e12 VDC operation with color-indicated wire cores and a 1-amp fuse requirement\u003c\/li\u003e\n\u003cli\u003eDual telltale indicators on top of the housing show when the light is on\u003c\/li\u003e\n\u003cli\u003eBuilt to the navigation light requirements referenced for EN\/ISO 19009:2015, USCG CFR 183.810, ABYC A-16, and 1972 COLREGS installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it on the bow centerline on a horizontal surface that stays within plus or minus 5 degrees when the boat is floating. The light needs a clear forward view with no rail bases, cleats, anchors, or other deck hardware blocking the port or starboard sectors.\u003c\/p\u003e\u003cp\u003eWiring is straightforward, but it is a 12-volt light only. Use marine-grade crimp connectors with waterproof insulation, protect the connections below deck, and place a 1-amp fuse in the positive feed. The installation pattern calls for a 3\/8 inch wire clearance hole and pilot holes for the mounting screws, using the gasket as the template.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a sensible match for small to mid-size powerboats and sailboats that need a fixed bi-color bow light rather than separate side lights or a raised combination light. The low deck-mount profile works well on bows where rails, anchors, or trolling motor gear leave limited room for taller hardware.\u003c\/p\u003e\u003cp\u003eBecause this is a combined bow light, fit depends as much on location as on voltage and visibility range. Check that your bow can take the round base on centerline and that the light will stay unobstructed through normal anchoring, docking, and trailering.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":51550411096310,"sku":"APL368032","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698542_apl368032_jpeg.jpg?v=1787793989"},{"product_id":"apl415198","title":"Lopolight 301-005 LED Stern Light, 2NM, 135°, 10-32VDC, IP68, Horizontal Mount, FB Flat Base, 6m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 301-005 Series is a 2 NM white stern navigation light with a 135° sector, built for horizontal mounting with an FB (flat base) POM mounting system and a 6 m cable.\u003c\/p\u003e\u003cp\u003eIt runs on 10-32 VDC and draws about 1.3 W (110 mA at 12 VDC, 50 mA at 24 VDC). The housing is IP68 rated, the light measures Ø92.5 mm x 36 mm, and installed weight is about 0.70 kg.\u003c\/p\u003e\u003cp\u003eThis is the aft-facing light used to show a white stern light when underway at night. It is intended for exposed stern locations that see spray, vibration, and regular washdowns, while keeping the mounting footprint low and the cabling tidy at the base.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 NM white stern navigation light with a 135° sector\u003c\/li\u003e\n\u003cli\u003eHorizontal mounting with FB (flat base) POM mounting system\u003c\/li\u003e\n\u003cli\u003e10-32 VDC input for 12 V and 24 V systems\u003c\/li\u003e\n\u003cli\u003eAbout 1.3 W power draw (110 mA at 12 VDC, 50 mA at 24 VDC)\u003c\/li\u003e\n\u003cli\u003eIP68 sealing for wet mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-cabled 6 m lead; minimum feed wire gauge 0.5 mm2 (AWG 22)\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with a PMMA lens and A4 stainless steel fasteners\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, LR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis stern light is offered in two finish options, both supplied with the same horizontal FB base and a 6 m cable.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the exterior finish of the light housing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e301-005-FB 6M: Finish Silver. A silver anodized aluminum housing that fits naturally alongside stainless and aluminum deck hardware.\u003c\/li\u003e\n\u003cli\u003e301-005-FB-B 6M: Finish Black. A black anodized aluminum housing that blends with darker paint schemes and hardware aft.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light with attached 6 m cable\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the light on a flat stern surface so the lens faces aft and the 135° sector is not blocked by davits, antennas, a tender, or the edge of a swim platform. Keep the unit oriented as marked on the housing so the light pattern stays within the required stern arc.\u003c\/p\u003e\u003cp\u003ePower is supplied from 10-32 VDC. Use at least 0.5 mm2 (AWG 22) feed wire, and protect the circuit according to your vessel's navigation-light wiring and marine electrical practice.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing is anodized aluminum with a PMMA lens and A4 stainless steel fasteners. The internal electronics are potted to resist vibration and water ingress, which is useful on the transom where slamming loads and washdowns are common.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is rated for 2 NM visibility and is intended for vessels up to 50 m where a 2 NM stern light is required. It suits larger powerboats and sailing yachts that need a clean horizontal mount and a low electrical load, as long as the stern sector remains clear from obstructions.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Black","offer_id":51550417486070,"sku":"APL415198-V2","price":572.94,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550417518838,"sku":"APL415198-V1","price":572.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1284052_apl415197.png?v=1787794299"},{"product_id":"apl648999","title":"Perko Stealth Series Fixed Mount White All-Round LED Light, 12V, 2nm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko Stealth Series is a fixed mount white all-round LED navigation light for power-driven vessels under 20 meters in length. It runs on 12V DC, draws 0.1 amps, uses 1.5 watts, and carries a 2 nautical mile USCG rating, giving boat owners clear fit information for small powerboats, center consoles, runabouts, and cruising boats that need an all-round white light.\u003c\/p\u003e\u003cp\u003eThe light uses Perko's reduced-glare Stealth layout with a black polymer top, clear fluted lens, and frosted globe. A fixed black polymer base and 3\/4-inch diameter anodized pole keep the installation low-profile, while the 1-inch x 2-5\/8-inch base footprint helps when replacing an older light or planning a new mounting location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite all-round LED navigation light with a 2 nautical mile USCG rating for power-driven vessels under 20 meters.\u003c\/li\u003e\n\u003cli\u003e12V LED operation with 1.5 watt draw and 0.1 amp current demand, useful for boats where battery load matters.\u003c\/li\u003e\n\u003cli\u003eReduced-glare construction with a black polymer top, clear fluted lens, and frosted globe.\u003c\/li\u003e\n\u003cli\u003eFixed mount black polymer base with a 1-inch x 2-5\/8-inch footprint for deck, transom, or structure mounting where the light has proper visibility.\u003c\/li\u003e\n\u003cli\u003e3\/4-inch diameter anodized pole and #8 screw mounting size support a straightforward permanent installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis Stealth Series fixed mount all-round light is offered in two height configurations. Both variants share the same 12V LED platform, fixed mount base style, white all-round light output, and reduced-glare lens arrangement.\u003c\/p\u003e\u003cp\u003eThe height difference helps match the light to the mounting surface and surrounding hardware. A taller version can help lift the light above nearby rails, outboards, or canvas edges, while the shorter version keeps the profile lower where visibility remains clear.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1608DP1BLK: Height 4-1\/2-inch. This version suits mounting spots where a lower vertical reach works with the boat's layout and the all-round light still has an unobstructed view.\u003c\/li\u003e\n\u003cli\u003e1608DP0BLK: Height 7-1\/8-inch. This version adds more vertical reach for installations where the light needs extra clearance above nearby gear or structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eInstall this light on a 12V DC circuit and place it where the all-round white light can be seen without being blocked by rails, tops, engines, passengers, or fishing equipment. The fixed base is meant for a permanent mounting location, so the best position is one that keeps the light protected from foot traffic while still meeting navigation light visibility requirements.\u003c\/p\u003e\u003cp\u003eThe small base footprint is helpful on narrow transoms, aft deck surfaces, and compact mounting pads. Check the available wire path before drilling, and use appropriate marine sealant around fasteners and wire penetrations to help keep water out of the mounting surface.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a practical match for small powerboats that need a fixed all-round white LED light rather than a removable pole light. It is especially useful on boats where the owner wants low current draw, a clean black housing, and a permanent light position that is ready for evening returns, early starts, and time at anchor where an all-round white light is required.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"7-1\/8-Inch","offer_id":51550417551606,"sku":"APL648999-V1","price":105.09,"currency_code":"USD","in_stock":false},{"title":"4-1\/2-Inch","offer_id":51550417584374,"sku":"APL648999-V2","price":103.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1326078_apl648999.webp?v=1787794299"},{"product_id":"apl041278","title":"Lopolight 301-002 Port Sidelight, 2NM, 10-32V, IP68, Vertical Mount, 6m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 301-002 Series is a 2 NM LED port sidelight that shows a 112.5° red sector from a vertical mount. These 6 m pre-cabled versions run on 10-32 VDC, so they fit both 12 V and 24 V systems, and they draw 1.2 W (90 mA at 12 V, 50 mA at 24 V).\u003c\/p\u003e\u003cp\u003eThe housing is IP68-rated for exposed mounting on deck structures, and the body stays compact at 92.5 x 28 x 49.7 mm. It is approved to COLREG72 and EN14744, with additional approvals including IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR, and it is rated for -25°C to 55°C operation.\u003c\/p\u003e\u003cp\u003eThis light is commonly specified for vessels in the 12-50 m range where 2 NM sidelights are required, and the longer lead helps when the connection point is deeper inside a pilothouse, bulwark, or hardtop.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e2 NM port sidelight with a 112.5° red sector and vertical mounting\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e10-32 VDC input for 12 V and 24 V electrical systems\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e6 m fixed cable for routing to a protected junction or switch location\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP68 rating for rain, spray, and washdowns\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow draw at 1.2 W (90 mA at 12 V, 50 mA at 24 V)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompact footprint: 92.5 x 28 x 49.7 mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOperating temperature range: -25°C to 55°C\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAnodized aluminum housing with PMMA lens and A4 stainless mounting screws\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis port sidelight is offered in two finish options while keeping the same light function: 2 NM red port sector, vertical mount, and a 6 m cable.\u003c\/p\u003e\u003cp\u003eThe finish is what changes between variants. Electrical input (10-32 VDC), IP68 rating, and the physical size remain consistent across the two configurations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e301-002-6M: Finish: Silver. A straightforward match for bright metal trim and unpainted aluminum structures.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e301-002-B-6M: Finish: Black. A cleaner look on darker topsides, pilothouse sides, and hardtops.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eNavigation light with 6 m cable\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2 mounting screws (M6 x 8 mm)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eInstallation guide\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on the port side on a vertical surface with a clear view across the required arc. Keep the lens sector unobstructed by rails, canvas, or deck gear, and seal fastener penetrations as you would for any deck-mounted fitting. The supplied M6 screws suit many common mounting pads and brackets, but the mounting surface needs enough backing to handle vibration and flex.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it to a 10-32 VDC navigation-light circuit and route the lead where it will not chafe. The minimum feed wire gauge is 0.5 mm2 (AWG 22), and longer overall runs may call for heavier conductors depending on your panel location and routing. Make splices in a dry area or in a sealed junction, and leave a drip loop where the cable enters the structure.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing uses anodized aluminum (25 µ) with a PMMA lens and A4 stainless hardware, and the assembly is rated IP68. On saltwater boats, a fresh-water rinse around the lens and fasteners helps keep the finish looking clean and avoids salt buildup at the mounting points.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for pilothouse boats, larger center consoles, and sailing yachts where the sidelight mounts on a cabin side or bulwark and the wiring needs extra length to reach inside. It also works well on refits where you want a compact housing and a known 2 NM sector without changing the mounting style.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Black","offer_id":51550428463350,"sku":"APL041278-V2","price":454.11,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550428496118,"sku":"APL041278-V1","price":464.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1311955_apl041278.png?v=1787794500"},{"product_id":"apl062522","title":"Perko Vertical Mount Stern Light, 12V, 2nm, Flush Mount, Polished Stainless Steel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko 0946DP1STS is a flush-mount stern navigation light for 12V DC systems on sail or power vessels under 20 meters (65.6 ft.) in length. It is USCG 2 nm certified and uses the included 10 watt bulb, with listed draw of 0.74 amps.\u003c\/p\u003e\u003cp\u003eThis version has a bezel in polished stainless steel and a black polymer base. The housing measures 3 inches outside diameter, 1 inch deep, and 1-15\/16 inches high, so it fits well on transoms and aft bulkheads where space is limited and a round flush light is preferred.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eVertical flush-mount stern light for sail or power vessels under 20 meters (65.6 ft.)\u003c\/li\u003e\n\u003cli\u003eUSCG 2 nm certified for the stern-light position\u003c\/li\u003e\n\u003cli\u003e12V DC operation with included 10 watt bulb\u003c\/li\u003e\n\u003cli\u003eListed current draw of 0.74 amps\u003c\/li\u003e\n\u003cli\u003eBezel in polished stainless steel with black polymer base\u003c\/li\u003e\n\u003cli\u003e3 inch outside diameter, 1 inch depth, and 1-15\/16 inch height\u003c\/li\u003e\n\u003cli\u003eUses #8 mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part is for boats with a 12V navigation-light circuit that need a dedicated stern light rather than an all-round pole light. It belongs on a vertical surface at the stern, and the compact round footprint helps when replacing an older flush light or working within a tight mounting area.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCheck the available space before ordering, especially the 3 inch outside diameter, 1 inch depth, and screw pattern for #8 fasteners. On installation, the light needs to sit upright on the aft-facing surface so the stern sector remains clear and the light shows correctly at night.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light suits owners replacing a round flush stern light on a small cruiser, runabout, center console, or sailboat that uses a 12V navigation-light circuit. It also fits boats where a stainless trim ring makes sense on an exposed transom or aft bulkhead.\u003c\/p\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":51550504583414,"sku":"APL062522","price":95.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0373157_apl062522_jpeg.jpg?v=1787795686"},{"product_id":"apl853808","title":"Apollo - Port (Red) LED Navigation Lamp - 2-3 NM, Flush Mount","description":"\u003ch4\u003eIntroducing the SI Flush Mount LED Marine Navigation Lamp for the Port: Enhancing Safety and Style for Power Driven Vessels\u003c\/h4\u003e\n\u003cp\u003eElevate the safety and style of your power driven vessel with the SI Flush Mount LED Marine Navigation Lamp designed specifically for the port side. Combining reliability, durability, and compliance with regulations, this lamp is the perfect choice for navigating the open waters with confidence.\u003c\/p\u003e\n\u003cp\u003eEmbodying a sleek and aerodynamic design, the SI Flush Mount LED lamp seamlessly integrates with the hard top of your vessel, enhancing its overall aesthetics. Its all-white flush mount appearance exudes sophistication while optimizing aerodynamics for a smooth sailing experience.\u003c\/p\u003e\n\u003cp\u003eCrafted with precision and utilizing high-quality materials, including Sist, Balt, and PeT lenses, this lamp guarantees years of trouble-free performance. Built to withstand the challenging marine environment, it adheres to IP68 standards and is fully potted for enhanced durability, ensuring it stands strong against the elements.\u003c\/p\u003e\n\u003cp\u003eExperience consistent illumination and safety during navigation with the regulation circuitry of the SI Flush Mount LED lamp. Regardless of voltage fluctuations or spikes on your vessel, it maintains a constant current supply and brightness, providing reliable lighting at all times. Moreover, its exceptional energy efficiency results in a low power draw, preserving your vessel's electrical system.\u003c\/p\u003e\n\u003cp\u003eInstalling the SI Flush Mount LED lamp is a breeze. Following international regulations, it should be mounted with the rear of the housing parallel to the hull centerline, guaranteeing optimal visibility and adherence to safety standards. To prevent obstruction, ensure the lamp is unimpeded by items such as rod holders. For a secure installation, utilize a suitable adhesive sealant like silicone sealant, maintaining the lamp's position and preventing water ingress.\u003c\/p\u003e\n\u003cp\u003eCompliance is key when it comes to safety regulations, and the SI Flush Mount LED lamp is labeled USCG2NM or USCG3NM, denoting its adherence to applicable standards. Rest easy knowing that your vessel's port navigation lighting meets the necessary safety requirements.\u003c\/p\u003e\n\u003cp\u003eFor seamless connectivity, optional Deutsch connectors can be attached to the cable without any splices. Adhering to the correct wire gauge as per the Deutsch datasheet and ensuring correct polarity are essential for the LED lamp to function effectively, allowing for hassle-free integration into your vessel's electrical system.\u003c\/p\u003e\n\u003cp\u003eMaintaining the lamp's pristine condition is simple. Avoid aliphatic hydrocarbon solvents such as MEK, acetone, or benzine during cleaning, as they can damage the lens and housing. Instead, opt for mild cleaners like Novus #1 Plastics Cleaner, providing a safe and effective cleaning solution.\u003c\/p\u003e\n\u003cp\u003eElevate the safety and visual appeal of your power driven vessel with the SI Flush Mount LED Marine Navigation Lamp for the port side. Its durable construction, reliable performance, and compliance with regulations make it the ultimate choice for enhancing your port navigation needs.\u003c\/p\u003e\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSleek all-white flush mount appearance\u003c\/li\u003e\n\u003cli\u003eConstructed with high-quality materials for exceptional durability\u003c\/li\u003e\n\u003cli\u003eMeets IP68 standards and fully potted for enhanced durability\u003c\/li\u003e\n\u003cli\u003eRegulation circuitry ensures constant current supply and brightness\u003c\/li\u003e\n\u003cli\u003eExcellent energy efficiency with a low power draw\u003c\/li\u003e\n\u003cli\u003eEasy installation adhering to international regulations\u003c\/li\u003e\n\u003cli\u003eCompliance with USCG2NM or USCG3NM labeling for safety standards\u003c\/li\u003e\n\u003cli\u003eOptional Deutsch connectors for seamless connectivity\u003c\/li\u003e\n\u003cli\u003eMaintenance-friendly with safe and effective cleaning recommendations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sonic Illusions","offers":[{"title":"Default Title","offer_id":51550515658998,"sku":"APL853808","price":292.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370914_apl853808_jpeg.jpg?v=1787795800"},{"product_id":"apl028081","title":"Navisafe - Navilight 360° - 2NM, w\/Navimount Base \u0026 RIB Mount, White","description":"\u003ch4\u003eIlluminate Your Waters\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNavilight All RED 360° 2NM w\/Navimount Base \u0026amp; RIB Mount - White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDive into an immersive experience with the Navilight All RED 360° Navigation light. This versatile light is not only compatible with the Navisafe Navimount system but also seamlessly integrates with many GoPro® \/ Action camera mounts.\u003c\/p\u003e\n\u003ch4\u003ePower and Precision\u003c\/h4\u003e\n\u003cp\u003eBoasting technical prowess, the Navilight All RED 360° ensures unmatched performance whether you're sailing or capturing action-packed adventures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specs At A Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures 5 illuminating Modes including a 360° mode\u003c\/li\u003e\n\u003cli\u003eFloats with light facing up\u003c\/li\u003e\n\u003cli\u003eResilient against water up to 20M \/66'\u003c\/li\u003e\n\u003cli\u003eBuilt with anti-corrosion materials\u003c\/li\u003e\n\u003cli\u003eRelies on three AAA batteries (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDelve into Different Modes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e16 RED LED 360° Constant lights lasts 40 - 45hrs\u003c\/li\u003e\n\u003cli\u003e16 RED LED 360° Flashing lights run for 110 - 115hrs\u003c\/li\u003e\n\u003cli\u003e10 RED LED 225° Forward lights goes for 70 - 75hrs\u003c\/li\u003e\n\u003cli\u003e6 RED LED 135° Stern lights shines for 95-100hrs\u003c\/li\u003e\n\u003cli\u003e4 RED LED 360° Dim function powers for 125-130hrs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIntegration Possibilities\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAttach lights with Magnetic base, Navimount base, or Suction base\u003c\/li\u003e\n\u003cli\u003eModels like Navilight 001, 010, 040, 305, 340 need the Navisafe converter Navimount \/ 960\u003c\/li\u003e\n\u003cli\u003eModels 041 and 341 can be mounted directly without converters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eIn The Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eComes with a \"3M\" self-adhesive sticker suitable for boats made from Hypalon, Polyethylene, or PVC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550533353718,"sku":"APL028081","price":125.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698381_apl028081_jpeg.jpg?v=1787796222"},{"product_id":"apl070404","title":"Lopolight 200-024 180 Deg White Navigation Light, 2NM, Vertical Mount, 10-32VDC, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 200-024 Series is a 2 NM, 180° white navigation light for vertical mounting, with extended pre-attached cable options for longer wire runs on board.\u003c\/p\u003e\u003cp\u003eIt operates on 10-32 VDC for 12 V and 24 V systems and carries an IP68 rating for exposed mounting locations. In the single-stack format, the housing measures 104 mm x 37 mm x 45 mm (4.0 in x 1.4 in x 1.8 in).\u003c\/p\u003e\u003cp\u003eApprovals include COLREG72 along with EN14744, IEC 60945, and USCG, which helps when you need a certified 180° white sector light on a yacht or larger powerboat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 NM visibility with a 180° white sector for installations that call for this arc.\u003c\/li\u003e\n\u003cli\u003e10-32 VDC input for both 12 V and 24 V DC systems.\u003c\/li\u003e\n\u003cli\u003eIP68-rated sealing for rain, spray, and washdowns in exposed mounting spots.\u003c\/li\u003e\n\u003cli\u003eVertical-mount format; the single-stack housing footprint is 104 mm x 37 mm x 45 mm.\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with a PMMA lens and A4 stainless mounting screws.\u003c\/li\u003e\n\u003cli\u003eExtended pre-attached cable options (6 m or 20 m) to reduce the need for in-line splices.\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -25°C to 55°C for use across seasons.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range is offered with two finishes, two cable lengths, and two styles labeled Single Stack and Double Stack.\u003c\/p\u003e\u003cp\u003eFinish options are silver anodized or black anodized, and cable length is either 6 m or 20 m. Style indicates the housing format used for the installation, so it is worth confirming clearance at the mounting point before selecting between Single Stack and Double Stack.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light to a flat vertical surface so the 180° sector faces the required direction for your navigation light plan. Dry-fit the unit and confirm the arc is not blocked by rails, antennas, davits, or canvas that could create shadows.\u003c\/p\u003e\u003cp\u003eRoute the attached cable to a protected connection point inside the boat, leaving a drip loop before any cable entry. Use marine-grade terminations and strain relief so vibration and movement do not work the conductors loose over time.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a straightforward DC light that ties into a navigation-light circuit. With the 10-32 VDC input range, it fits common switch panels and monitoring setups found on 12 V and 24 V boats.\u003c\/p\u003e\u003cp\u003ePlan the cable path with service access in mind, especially on mast or hardtop installs, so the light can be removed later without cutting wiring.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing is anodized aluminum (silver or black finish depending on variant) with a PMMA lens and A4 stainless fasteners. For best long-term results in saltwater, bed and seal fasteners appropriately for the mounting surface and keep dissimilar metals isolated where needed.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light (pre-cabled)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lopolight","offers":[{"title":"Silver \/ Double Stack \/ 6M","offer_id":51550536564982,"sku":"APL070404-V5","price":892.08,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Single Stack \/ 6M","offer_id":51550536597750,"sku":"APL070404-V1","price":460.9,"currency_code":"USD","in_stock":true},{"title":"Black \/ Double Stack \/ 20M","offer_id":51550536630518,"sku":"APL070404-V8","price":1119.08,"currency_code":"USD","in_stock":true},{"title":"Black \/ Double Stack \/ 6M","offer_id":51550536663286,"sku":"APL070404-V6","price":892.08,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Double Stack \/ 20M","offer_id":51550536696054,"sku":"APL070404-V7","price":1119.08,"currency_code":"USD","in_stock":true},{"title":"Black \/ Single Stack \/ 6M","offer_id":51550536728822,"sku":"APL070404-V2","price":450.52,"currency_code":"USD","in_stock":true},{"title":"Black \/ Single Stack \/ 20M","offer_id":51550536761590,"sku":"APL070404-V4","price":563.95,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Single Stack \/ 20M","offer_id":51550536794358,"sku":"APL070404-V3","price":563.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1311838_apl070404.webp?v=1787796272"},{"product_id":"apl362578","title":"Sea-Dog - Masthead Light - Stainless Steel","description":"\u003ch4\u003eGuiding Light of the Seas: Sea-Dog Stainless Steel Masthead Light\u003c\/h4\u003e\n\u003cp\u003eIlluminate the way forward with the \u003cstrong\u003eSea-Dog Stainless Steel Masthead Light\u003c\/strong\u003e. This 225° masthead light, constructed from high-quality stamped 304 stainless steel, is designed to stand the test of time against the harsh marine environment. Ideal for replacing existing lighting on your vessel, it ensures you remain visible and compliant with maritime navigation standards. The light requires three #4 RH fasteners for installation (not included), offering a straightforward setup. By adhering to USCG regulations for 1 NM and 2 NM navigation lights, this masthead light not only enhances your boat's visibility but also ensures it meets the necessary safety standards for nighttime sailing or in low-visibility conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from durable stamped 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e225° visibility to enhance safety and compliance on the water\u003c\/li\u003e\n\u003cli\u003eDesigned for easy replacement of existing masthead lighting\u003c\/li\u003e\n\u003cli\u003eRequires three #4 RH fasteners for installation (not included)\u003c\/li\u003e\n\u003cli\u003eMeets USCG regulations for 1 NM and 2 NM navigation lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStainless Steel Durability Meets Maritime Safety\u003c\/h4\u003e\n\u003cp\u003eThe Sea-Dog Stainless Steel Masthead Light is engineered for both performance and durability. Its 304 stainless steel construction ensures resistance to corrosion and damage from the marine environment, guaranteeing long-lasting reliability. This masthead light is an essential component of your vessel's navigation system, providing the necessary illumination to signal your presence to other boaters effectively.\u003c\/p\u003e\n\u003ch4\u003eSeamless Installation for Enhanced Navigation\u003c\/h4\u003e\n\u003cp\u003eWith a focus on simplicity and efficiency, this masthead light is designed for easy installation, allowing you to quickly replace your existing lighting without the need for complex procedures. The requirement for three #4 RH fasteners ensures a secure mount, keeping the light firmly in place even in rough conditions.\u003c\/p\u003e\n\u003ch4\u003eNavigate with Confidence\u003c\/h4\u003e\n\u003cp\u003eThe Sea-Dog Stainless Steel Masthead Light is more than just a lighting solution; it's a commitment to safety and compliance on the open water. By providing clear, unimpeded visibility, it helps ensure that your vessel navigates safely, making it an indispensable tool for any serious mariner. Equip your boat with this reliable masthead light and sail with confidence, knowing you are visible and compliant in all your maritime adventures.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"Default Title","offer_id":51550579491062,"sku":"APL362578","price":31.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0707370_apl362578.jpg?v=1787796753"},{"product_id":"apl048497","title":"Lopolight 200-012 Series 360 Degree LED Anchor Light, 2NM, 10-32VDC, IP68, Horizontal Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 200-012 Series anchor light is a white all-round anchor light for horizontal mounting with 2 nautical mile visibility and a 10 to 32 VDC operating range.\u003c\/p\u003e\u003cp\u003eIt is specified for vessels up to 164 ft (50 m) and uses an LED light source in an anodized aluminum housing with an IP68 rating for exposure to spray and washdowns.\u003c\/p\u003e\u003cp\u003eA 2.3 ft (0.7 m) cable is fitted for wiring into your anchor-light circuit, and it meets U.S.C.G., EN14744, and COLREG72 requirements.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 NM all-round white anchor light, specified for vessels up to 164 ft (50 m)\u003c\/li\u003e\n\u003cli\u003eHorizontal mount format for hardtops, cabin roofs, mast platforms, and similar flat surfaces\u003c\/li\u003e\n\u003cli\u003e10 to 32 VDC input suited to both 12V and 24V systems\u003c\/li\u003e\n\u003cli\u003eLED light source (single LED)\u003c\/li\u003e\n\u003cli\u003eIP68-rated housing for heavy weather exposure and washdowns\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with an HDPE circular baseplate\u003c\/li\u003e\n\u003cli\u003e2.3 ft (0.7 m) attached cable for straightforward connection to a switched circuit\u003c\/li\u003e\n\u003cli\u003eMeets U.S.C.G., EN14744, and COLREG72 requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis series is offered in multiple configurations, with finish and style as the main differences.\u003c\/p\u003e\u003cp\u003eFinish changes the exterior color, and style indicates standard operation or a version that supports strobe operation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e201-012-FB: Finish Silver, Style Standard. A clean silver look that blends well with many aluminum and stainless topside fittings.\u003c\/li\u003e\n\u003cli\u003e201-012-FB-B: Finish Black, Style Standard. A dark finish that pairs naturally with black rails, antennas, and hardtop hardware.\u003c\/li\u003e\n\u003cli\u003e201-012S-FB: Finish Silver, Style Strobe. The strobe style is used when a flashing mode is required alongside the standard configuration choice.\u003c\/li\u003e\n\u003cli\u003e201-012S-FB-B: Finish Black, Style Strobe. Combines the black exterior finish with the strobe style option for matching darker topside layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light with 2.3 ft (0.7 m) cable\u003c\/li\u003e\n\u003cli\u003eHDPE circular baseplate\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on a solid, horizontal surface where it has an unobstructed 360 degrees of visibility. Common locations include a hardtop, pilothouse roof, or a mast platform on sailboats. Use the supplied baseplate and hardware, and bed fasteners as appropriate for your mounting surface to keep water out of the core.\u003c\/p\u003e\u003cp\u003eRoute the cable away from heat sources and moving gear, then connect it to a properly fused 10 to 32 VDC anchor-light circuit. If your helm uses a combined navigation and anchor switch, confirm the wiring supports independent anchor-light operation when needed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an all-round white anchor light intended for installations that need 2 NM visibility and compliance with COLREG72 rules. The 10 to 32 VDC range covers typical 12V and 24V onboard power without a separate voltage converter.\u003c\/p\u003e\u003cp\u003eBefore drilling, confirm the chosen spot is not shaded by antennas, radar, outriggers, or rigging, and that the cable route can be kept protected through the headliner, mast wiring channel, or a dedicated chase.\u003c\/p\u003e\u003ch6\u003eMaterials and environmental protection\u003c\/h6\u003e\u003cp\u003eThe anodized aluminum housing and IP68 rating suit exposed mounting locations where salt spray, UV, and vibration are normal. For mixed-metal installations, isolate contact points where practical and rinse salt residue during routine washdowns.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of light is commonly used on coastal cruising boats that anchor overnight and want a clear, compliant all-round white indication from a compact, horizontal-mount unit. It also fits boats with limited vertical clearance on hardtops or pilothouse roofs where a low-profile mount keeps the light out of the way.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse with fresh water and mild soap, and avoid abrasive pads on the lens and finish. During seasonal checks, confirm the fasteners remain tight, inspect the cable entry for movement, and look for corrosion at connections, especially after long periods in saltwater environments.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Strobe \/ Silver","offer_id":51550593450230,"sku":"APL048497-V12","price":999.9,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Black","offer_id":51550593482998,"sku":"APL048497-V1","price":713.3,"currency_code":"USD","in_stock":true},{"title":"Strobe \/ Black","offer_id":51550593515766,"sku":"APL048497-V7","price":999.9,"currency_code":"USD","in_stock":true},{"title":"Standard \/ Silver","offer_id":51550593548534,"sku":"APL048497-V11","price":713.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1284310_apl048497.png?v=1787796887"},{"product_id":"apl931312","title":"Navisafe - Navilight 360° - 2NM, Glow In The Dark, Green, w\/Bendable Suction Cup Mount","description":"\u003ch4\u003eDiscover the Navilight Magic\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003ePortable Navilight 360° 2NM Rescue\u003c\/strong\u003e - a Glow In The Dark edition in an emergency green hue. With a unique Bendable Suction Cup Mount, this marine light brings unparalleled versatility to your nautical expeditions. Whether at dawn or dusk, its super bright LED lights ensure you're visible and safe, all while embracing the pristine beauty of the sea.\u003c\/p\u003e\n\u003ch4\u003eFeatures That Light Up The Sea\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUS Coast Guard approved for 2 nautical miles\u003c\/li\u003e\n\u003cli\u003eWaterproof and air-tight build that also floats\u003c\/li\u003e\n\u003cli\u003eDynamic glow pigments that shine bright for 8 hours\u003c\/li\u003e\n\u003cli\u003eMultiple modes to cater to diverse marine requirements\u003c\/li\u003e\n\u003cli\u003eRobust magnetic mounting system for easy attachments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Tidbits\u003c\/h4\u003e\n\u003cp\u003eThe Navilight 360° Rescue Edition isn’t just another marine light. Its technical prowess ensures you are well-lit in various maritime conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 Distinct Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, and Cabin light\u003c\/li\u003e\n\u003cli\u003eEmpowered by three AAA batteries (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSize and Weight – Compact Yet Powerful\u003c\/h4\u003e\n\u003cp\u003eWhile it’s packed with features, the Navilight doesn’t compromise on its size and weight:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: H = 35mm, Diameter = 68mm\u003c\/li\u003e\n\u003cli\u003eNet Weight: 115g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShedding Light on Its Burn Time\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e360° All-round light\/Anchoring light: 15hrs\u003c\/li\u003e\n\u003cli\u003e360° Flashing light: 85hrs\u003c\/li\u003e\n\u003cli\u003e225° Masthead light: 24hrs\u003c\/li\u003e\n\u003cli\u003e135° Sternlight: 32hrs\u003c\/li\u003e\n\u003cli\u003e360° Cabin light: 72hrs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMounting Made Easy\u003c\/h4\u003e\n\u003cp\u003eThe Bendable Suction Mount is designed for hassle-free and secure mounting of Navilights on smooth and flat surfaces. It's quick-release mechanism makes shifting it a breeze, ensuring your lights are always optimally placed for best visibility.\u003c\/p\u003e\n\u003ch4\u003eFlexibility and Durability in One\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRobust suction cup base\u003c\/li\u003e\n\u003cli\u003e180° Bendable shaft for perfect positioning\u003c\/li\u003e\n\u003cli\u003eSelf-adhering plastic mounting plate for rough surfaces\u003c\/li\u003e\n\u003cli\u003eDimensions: L = 68mm, H = 157mm\u003c\/li\u003e\n\u003cli\u003eNet Weight: 80g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550636835062,"sku":"APL931312","price":214.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698373_apl931312_jpeg.jpg?v=1787797162"},{"product_id":"apl120943","title":"C.E. Smith 40\" Post Guide-On With L.E.D. Lighted Posts 27740","description":"\u003cp\u003e\u003cstrong\u003e40\" Post Guide-On With LED Lighted Posts \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePost Guide-Ons allow you to see the location of your trailer when it's underwater. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. Amber light faces front, red faces rear. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting hardware and wiring included \u003c\/li\u003e\n\u003cli\u003e40\" Total Height\u003c\/li\u003e\n\u003cli\u003eAdjusts Out to 13\" each Side\u003c\/li\u003e\n\u003cli\u003eFits Frames up to 3\"W x 4-1\/4\"H\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" sq. 16 ga Pre-Galvanized Steel post\u003c\/li\u003e\n\u003cli\u003eExtends 18\" Into 2\" PVC tube for strength\u003c\/li\u003e\n\u003cli\u003ePre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized \u003c\/li\u003e\n\u003cli\u003eThe galvanized coating is very thin (0.45 oz. on each side).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Check with your state Department of Transportation for restrictions regarding maximum trailer width\u003c\/p\u003e\n\u003cp\u003e*Sold in pairs\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":51550661509366,"sku":"APL120943","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1098335_apl120943jpg.jpg?v=1787797417"},{"product_id":"apl139810","title":"Hella Marine 3562 Series Starboard Navigation Light, Green Light, 1 NM, 12V, IP54, Vertical Surface Mount, Incandescent","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 3562 Series starboard navigation lamp is an incandescent sidelight for 12V systems with a 1 nautical mile visibility rating and an IP54 housing.\u003c\/p\u003e\u003cp\u003eIt uses a 12V\/10W SV8.5 bulb and the snap lock housing lets you change the bulb without tools, which helps when you need a quick service job onboard. The housing and lens are UV and impact resistant plastic, built for saltwater use and non-magnetic installations, with cable entry through the base plate via a rubber grommet. Approvals include IMO Col Reg 72, RINA, USCG, ABYC A-16, and Maritime NZ.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStarboard navigation light with 1 nautical mile visibility rating\u003c\/li\u003e\n\u003cli\u003e12V incandescent lamp using a 12V\/10W SV8.5 bulb\u003c\/li\u003e\n\u003cli\u003eIP54 protection rating for dust and splashing water\u003c\/li\u003e\n\u003cli\u003eSnap lock housing for tool-free bulb changes\u003c\/li\u003e\n\u003cli\u003eCable entry through the base plate with a rubber grommet for a watertight pass-through\u003c\/li\u003e\n\u003cli\u003eUV and impact resistant plastic housing and lens, suitable for saltwater use and non-magnetic installations\u003c\/li\u003e\n\u003cli\u003eApprovals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis navigation lamp is offered in multiple configurations so you can match the housing to your boat’s finish.\u003c\/p\u003e\u003cp\u003eThe variants below differ by product color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e003562025: Product color Black. A darker housing can blend in on boats with dark trim, tinted windows, or black deck hardware.\u003c\/li\u003e\n\u003cli\u003e003562125: Product color White. A lighter housing tends to disappear visually against white gelcoat and light-colored cabin sides.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis lamp is made for vertical surface mounting on the starboard side, placed where it has a clear, unobstructed view to the required arc. Route the cable through the base plate and seat the rubber grommet cleanly so the pass-through stays tight and protected from chafe.\u003c\/p\u003e\u003cp\u003eOn a 12V DC system, use marine-grade tinned wire and keep connections dry and supported so vibration does not work them loose over time. After mounting, confirm the light sits level and is not blocked by rails, rub rails, or deck gear.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eAs a starboard sidelight, this fixture is used on the vessel’s right-hand side and should be paired with the correct port and stern lights for a complete navigation-light set. The 1 nautical mile rating is typically used on smaller vessels where that range meets the rules for the boat and operating area.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the lens and housing during routine washdowns and check the rubber grommet for cracks or hardening. If the light output looks dim or intermittent, replace the 12V\/10W SV8.5 bulb and inspect the contacts for corrosion before closing the snap lock housing again.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Black","offer_id":51550682349814,"sku":"APL139810-V3","price":34.27,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550682382582,"sku":"APL139810-V4","price":31.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0362549_apl139810_jpeg.jpg?v=1787797856"},{"product_id":"apl381437","title":"Attwood Marine LightArmor All-Round Pole Navigation Light, For PowerBase, LED, 2-Mile 360° Visibility","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine LightArmor All-Round Navigation Light is an LED pole light made for use with the Attwood PowerBase Light system on power-driven boats up to 39.4 ft, or 12 m. It gives 360° white visibility rated to 2 NM, or 3.7 km, which makes it a practical fit for small powerboats that need an all-round navigation light mounted high enough above the red and green sidelights.\u003c\/p\u003e\u003cp\u003eThis 5590 Series light works only with the Attwood PowerBase Light 6100-LT Series and is not a universal plug-in pole for standard fixed bases. The articulating head adjusts from 15° forward to 15° aft, helping the light sit level on installations where the PowerBase or mounting surface is not perfectly flat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLED all-round white navigation light with 360° visibility rated to 2 NM, or 3.7 km.\u003c\/li\u003e\n\u003cli\u003eFor power-driven vessels up to 39.4 ft, or 12 m, when selected and installed according to applicable navigation-light rules.\u003c\/li\u003e\n\u003cli\u003eCompatible only with the Attwood PowerBase Light 6100-LT Series.\u003c\/li\u003e\n\u003cli\u003eArticulating head adjusts from 15° forward to 15° aft for angled mounting applications.\u003c\/li\u003e\n\u003cli\u003eRated for 50,000 hours of use.\u003c\/li\u003e\n\u003cli\u003eMade to meet USCG CFR 183.810, ABYC C-5 and A-16, EN\/ISO 19009:2015, 1972 COLREGS, and US Inland Navigation Rules when installed properly.\u003c\/li\u003e\n\u003cli\u003eAvailable in 24\", 30\", 36\", and 42\" pole lengths to match vessel layout and required light height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis LightArmor PowerBase all-round light is offered in four pole lengths so the installation can be matched to the boat’s windshield, hardtop, rail layout, and sidelight height.\u003c\/p\u003e\u003cp\u003eThe pole length changes between variants. The 5590 Series all-round LED function, PowerBase compatibility, 360° coverage, and 2 NM visibility rating remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5590-24-7: 24\" pole length. This shorter pole works well where the mounting point already gives the light enough height above the sidelights without adding extra overhead reach.\u003c\/li\u003e\n\u003cli\u003e5590-30-7: 30\" pole length. This size adds clearance for many console and windshield layouts while keeping the pole moderate in height.\u003c\/li\u003e\n\u003cli\u003e5590-36-7: 36\" pole length. The taller pole helps raise the all-round light above more surrounding deck hardware, seating, or console structure.\u003c\/li\u003e\n\u003cli\u003e5590-42-7: 42\" pole length. This is the tallest configuration in the group and gives additional height where the PowerBase is mounted lower or farther from the boat’s highest sight line.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is for the Attwood PowerBase Light system only. It is not intended for other fixed, fold-down, or plug-in navigation-light bases, so the existing base on the boat should be confirmed before ordering.\u003c\/p\u003e\u003cp\u003eFor boats under 12 m, the all-round light must be positioned at least one meter above the red and green sidelights, measured at the center of the light source. The available pole lengths give installers room to match that requirement on different helm, deck, and hardtop layouts.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDuring installation, the pole wiring routes through the PowerBase breakaway opening and connects to the PowerBase wire harness with pin connectors. The pole is then inserted into the PowerBase unit and fastened after the pole and base holes are aligned.\u003c\/p\u003e\u003cp\u003eFor the all-round light setup, the light head should be adjusted so it sits parallel to the vessel’s normal resting float position. After installation, the PowerBase should be cycled between stowed and deployed positions, and the navigation light should be checked from the helm switch before the boat is used at night.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match for small powerboats that use the PowerBase powered fold-down system and need the all-round light to deploy from the helm instead of being raised or lowered by hand. It is especially useful on boats where bridges, storage covers, trailering, or low clearance make a fixed-height pole less convenient.\u003c\/p\u003e\u003ch6\u003eMaintenance and service\u003c\/h6\u003e\u003cp\u003eThe light assembly is not user serviceable and should be replaced if it is damaged, altered, or reaches 20 years from the installation date. When replacing an existing navigation light, the replacement should have at least the same pole length and rated visibility as the original installation.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"36\"","offer_id":51550684512502,"sku":"APL381437-V3","price":59.99,"currency_code":"USD","in_stock":true},{"title":"42\"","offer_id":51550684545270,"sku":"APL381437-V4","price":59.99,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":51550684578038,"sku":"APL381437-V1","price":59.99,"currency_code":"USD","in_stock":true},{"title":"30\"","offer_id":51550684610806,"sku":"APL381437-V2","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327588_apl381437.webp?v=1787797943"},{"product_id":"apl196448","title":"Lumitec Contour Inset Navigation Light, 10-30V, IP67, USCG 2 NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec Contour Series Navigation Light is an inset LED navigation light for boats where the fixture needs to sit low and look clean on a hardtop, arch, or pilothouse. It runs on 10-30 VDC and draws about 0.8 W (67 mA at 12 VDC, 33 mA at 24 VDC).\u003c\/p\u003e\u003cp\u003eEach light carries a 2 nautical mile visibility rating and conforms to ABYC C-5. That covers typical navigation-light requirements for vessels up to 50 m (165 ft) when mounted with an unobstructed view.\u003c\/p\u003e\u003cp\u003eThe housing is rated IP67 for spray and washdowns and is specified for -31F to 131F operation. The body is about 2.67 inches wide and about 1.32 inches deep, which helps when checking clearance behind the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInset-format navigation light with a white housing for a tidy install on hardtops, arches, and pilothouses\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003e2 NM visibility rating for navigation light use on vessels up to 50 m (165 ft)\u003c\/li\u003e\n\u003cli\u003eIP67-rated construction for exposed mounting locations and routine washdowns\u003c\/li\u003e\n\u003cli\u003eLow power draw: about 0.8 W (67 mA at 12 VDC, 33 mA at 24 VDC)\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three color outputs to cover the standard red, green, and white navigation-light functions.\u003c\/p\u003e\u003cp\u003eAcross the three options, the electrical input (10-30 VDC), 2 NM rating, and physical format remain the same. The difference is the color output and the intended mounting position on the boat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101847: Color output Port Red. Typically installed on the port (left) side with a clear forward view so rails, canvas, and deck gear do not block the required arc.\u003c\/li\u003e\n\u003cli\u003e101837: Color output Starboard Green. Typically installed on the starboard (right) side and aligned so it covers the correct horizontal arc of visibility.\u003c\/li\u003e\n\u003cli\u003e101867: Color output Stern White. Typically installed at the stern where it can be seen from astern without glare reflecting back into the cockpit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eWiring is a simple two-wire connection: positive and negative to a 10-30 VDC navigation-light circuit. It helps to support the cable run so it does not chafe, and to seal any penetrations through the hardtop or arch to keep water out of the core.\u003c\/p\u003e\u003cp\u003ePort and starboard lights rely on correct orientation to meet the intended 112.5 degrees of horizontal coverage. Keep the lens unobstructed and avoid mounting positions where the hull, deck, or fixed structures shadow the light.\u003c\/p\u003e\u003cp\u003eThe light module snaps into the housing and can be released from the back when service access is needed.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe low current draw helps on longer cable runs and on boats with multiple stations where voltage drop can show up at the bow or hardtop. The body depth is about 1.32 inches, so clearance behind the mounting surface is worth confirming before cutting.\u003c\/p\u003e\u003cp\u003eWith an IP67 rating and an operating range that covers -31F to 131F, this style of inset light suits boats that live outdoors and see spray, sun, and vibration.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis is a good match for center consoles, sportfishers, and pilothouse boats where navigation lights need to sit flush on a hardtop or arch and stay easy to access for maintenance.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Starboard\/Green","offer_id":51550689820918,"sku":"APL196448-V2","price":102.19,"currency_code":"USD","in_stock":true},{"title":"Port\/Red","offer_id":51550689853686,"sku":"APL196448-V3","price":104.29,"currency_code":"USD","in_stock":true},{"title":"Stern\/White","offer_id":51550689886454,"sku":"APL196448-V1","price":105.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312042_apl196448.jpg?v=1787798212"},{"product_id":"apl087931","title":"Lopolight LED Stern Light, 2 NM, Vertical Mount, 10-32VDC, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 301-006 Series is a 2 nautical mile, 135° white stern navigation light for vertical mounting on vessels up to 50 m (164 ft). It runs on 10-32 VDC systems and draws about 1.3 W (110 mA at 12 VDC, 50 mA at 24 VDC), so it fits cleanly into typical 12V and 24V nav-light circuits.\u003c\/p\u003e\u003cp\u003eThe housing is fully potted and rated IP68, which helps when the stern sees spray, washdowns, and vibration. Silver and black versions use anodized aluminum with a PMMA lens and stainless mounting screws, while the white version uses a ceramic-coated finish.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e135° white stern sector with 2 NM visibility for vessels up to 50 m (164 ft)\u003c\/li\u003e\n\u003cli\u003eOperating voltage 10-32 VDC for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003eIP68 ingress rating and fully potted electronics for water exposure and vibration\u003c\/li\u003e\n\u003cli\u003eLow current draw: 110 mA at 12 VDC, 50 mA at 24 VDC (about 1.3 W)\u003c\/li\u003e\n\u003cli\u003ePre-cabled with a 2.5 m (8.2 ft) shielded marine-grade cable; minimum feed wire gauge 0.5 mm2 (AWG 22)\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, LR\u003c\/li\u003e\n\u003cli\u003eFinish options: silver anodized, black anodized, or white ceramic coated\u003c\/li\u003e\n\u003cli\u003eStyle options: Single Stack or Double Stack, with different overall footprints\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis series is offered in six configurations that combine housing finish with the Single Stack or Double Stack style.\u003c\/p\u003e\u003cp\u003eAcross the range, the light output stays white with a 135° stern sector, 2 NM visibility, vertical mounting, 10-32 VDC input, IP68 rating, and a 2.5 m cable. Single Stack versions list overall dimensions of 86.2 x 28 x 57.75 mm, while Double Stack versions list Ø92.5 mm x 96.5 mm, which matters when matching an existing mount and confirming clearance around rails, platforms, and aft hardware.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the light on a truly vertical surface at the stern with a clear view across the required 135° arc. Keep it on the vessel centerline and high enough that rails, outboards, davits, or a tender on the platform do not block the beam.\u003c\/p\u003e\u003cp\u003eThe light is supplied with a 2.5 m shielded cable for a straightforward run back to the navigation light switch panel. Connect to a 10-32 VDC supply; the conductors are color-coded red for positive and black for ground, and the feed wiring is typically sized to at least 0.5 mm2 (AWG 22).\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eAs a 2 NM stern light for vessels up to 50 m, the 301-006 Series fits many coastal and offshore setups where the navigation lights are used regularly at night or in reduced visibility. It is a solid fit for sailboats, powerboats, and larger yachts that want an LED stern light that meets common navigation-light standards and keeps electrical load low on long runs.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light pre-cabled with 2.5 m (8.2 ft) shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003e2 mounting screws (M6 x 8 mm)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lopolight","offers":[{"title":"Black \/ Double Stack","offer_id":51550704730358,"sku":"APL087931-V2","price":982.84,"currency_code":"USD","in_stock":true},{"title":"Black \/ Single Stack","offer_id":51550704763126,"sku":"APL087931-V3","price":533.27,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Double Stack","offer_id":51550704795894,"sku":"APL087931-V5","price":1067.89,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Single Stack","offer_id":51550704828662,"sku":"APL087931-V1","price":533.27,"currency_code":"USD","in_stock":true},{"title":"White \/ Single Stack","offer_id":51550704861430,"sku":"APL087931-V4","price":573.39,"currency_code":"USD","in_stock":true},{"title":"White \/ Double Stack","offer_id":51550704894198,"sku":"APL087931-V6","price":1056.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1284137_apl087931.png?v=1787798611"},{"product_id":"apl423272","title":"Navisafe - Navilight 360° - 2NM, w\/Navibolt Base \u0026 RIB Mount, White","description":"\u003ch4\u003eIlluminate the Seas: Navlight 360° Guide\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNavlight 360° 2NM w\/Navibolt Base \u0026amp; RIB Mount - White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEmbark on your marine adventures with the portable all-around white Navilight featuring a Navibolt base. Expertly designed for compatibility with the Navisafe Navimount system, it promises strength and unmatched durability. With its sleek design, it ensures low and tight mounting when combined with any Navimount.\u003c\/p\u003e\n\u003ch4\u003eSpecifications Worth Navigating\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUSCG Approval for 2 Nautical Miles\u003c\/li\u003e\n\u003cli\u003eComes with 5 varied modes including 360°\u003c\/li\u003e\n\u003cli\u003eCapable of floating with the light facing up\u003c\/li\u003e\n\u003cli\u003eWater-resistant up to depths of 20M \/66'\u003c\/li\u003e\n\u003cli\u003eStands strong against corrosion\u003c\/li\u003e\n\u003cli\u003eRuns on three AAA batteries (not part of the package)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMultiple Modes for Diverse Voyages\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e16 White LED 360° Constant lights for 13 - 15hrs\u003c\/li\u003e\n\u003cli\u003e16 White LED 360° Flashing lights for 80 - 85hrs\u003c\/li\u003e\n\u003cli\u003e10 White LED 225° Forward lights for 22 - 24hrs\u003c\/li\u003e\n\u003cli\u003e6 White LED 135° Backward lights for 30 -32hrs\u003c\/li\u003e\n\u003cli\u003e4 White LED 360° Dim function for 70 - 72hrs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe RIB Mount: A Perfect Companion for Inflatable Vessels\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNavimount RIB - White\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExpertly crafted to securely fix Navilights with Magnetic base, Navimount base, or Suction base to inflatable boat tubes.\u003c\/li\u003e\n\u003cli\u003eFor Navilight models 001, 010, 040, 305, 340, the Navisafe converter Navimount \/ 960 is required.\u003c\/li\u003e\n\u003cli\u003eDirect mounting is available for Navilight models 041 and 341 without any additional converters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550714560758,"sku":"APL423272","price":150.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698439_apl423272_jpeg.jpg?v=1787799181"},{"product_id":"apl134031","title":"Lopolight 301-107 Towing Light, 3nm, Vertical Mount, IP68, 10-32V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 301-107 Series is an amber towing navigation light for vertical mounting with a 3 nautical mile visibility rating and a 135° sector for the stern towing light position on vessels over 50 m (164 ft).\u003c\/p\u003e\u003cp\u003eIt runs on 10-32 VDC for 12 V or 24 V systems, draws 2.2 W (154 mA at 12 V, 90 mA at 24 V), and carries an IP68 rating for wet, exposed mounting. Each version is pre-cabled with a 2.5 m shielded marine-grade cable, and the anodized aluminum housing uses a PMMA lens with A4 stainless mounting screws.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAmber towing light with 3 nm visibility rating and 135° sector\u003c\/li\u003e\n\u003cli\u003eVertical mount format for stern towing light installations on vessels over 50 m (164 ft)\u003c\/li\u003e\n\u003cli\u003e10-32 VDC input for 12 V and 24 V DC systems\u003c\/li\u003e\n\u003cli\u003e2.2 W draw (154 mA at 12 V, 90 mA at 24 V)\u003c\/li\u003e\n\u003cli\u003eIP68 rating for wet, exposed mounting locations\u003c\/li\u003e\n\u003cli\u003ePre-cabled with 2.5 m shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with PMMA lens and A4 stainless mounting screws\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72 and EN14744, with USCG approval; also listed to IEC 60945 and IACS E10\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe series is offered in four configurations that change the housing finish and the stack format.\u003c\/p\u003e\u003cp\u003eAll versions share the same 3 nm, 135° amber towing output, vertical mounting, 10-32 VDC input, IP68 sealing, and 2.5 m pre-attached cable. Single Stack uses the smaller rectangular housing (86.2 x 28 x 57.75 mm, 0.43 kg), while Double Stack uses the larger round housing (Ø92.5 mm x 96.5 mm, 0.99 kg) labeled as double amber towing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e301-107: Finish Silver, Style Single Stack. Compact rectangular housing for installations with limited mounting surface.\u003c\/li\u003e\n\u003cli\u003e301-107-B: Finish Black, Style Single Stack. Same compact format with a black anodized housing that blends with darker hardware.\u003c\/li\u003e\n\u003cli\u003e301-107ST: Finish Silver, Style Double Stack. Round housing (Ø92.5 mm x 96.5 mm) in a double amber towing configuration.\u003c\/li\u003e\n\u003cli\u003e301-107ST-B: Finish Black, Style Double Stack. Same round, double amber towing format with a black anodized housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on a vertical surface where it has a clear view of the required 135° sector, then route the cable with a drip loop and protect it from chafe at the transom or mast structure. Power it from a 10-32 VDC navigation light circuit, and use at least 0.5 mm² (AWG 22) supply wiring; add overcurrent protection in the feed per your vessel's wiring plan.\u003c\/p\u003e\u003ch6\u003eCompatibility and compliance\u003c\/h6\u003e\u003cp\u003eThis is a towing light for the stern position under COLREG, intended for vessels over 50 m (164 ft). It is approved to COLREG72 and EN14744, and it is USCG approved; the series is also listed to IEC 60945 and IACS E10 for marine electronics environments.\u003c\/p\u003e\u003cp\u003eA towing light is only one part of the full navigation light set, so confirm your complete light plan and mounting heights before installation.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light, pre-cabled with 2.5 m shielded marine-grade cable\u003c\/li\u003e\n\u003cli\u003e2 mounting screws (M6 x 8 mm)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue from the lens and housing during routine washdowns and keep the cable entry and fasteners tight. Avoid abrasive cleaners on the PMMA lens so the light output stays consistent.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Single Stack \/ Black","offer_id":51550723342582,"sku":"APL134031-V1","price":1628.85,"currency_code":"USD","in_stock":true},{"title":"Double Stack \/ Silver","offer_id":51550723375350,"sku":"APL134031-V3","price":2894.84,"currency_code":"USD","in_stock":true},{"title":"Single Stack \/ Silver","offer_id":51550723408118,"sku":"APL134031-V2","price":1628.85,"currency_code":"USD","in_stock":true},{"title":"Double Stack \/ Black","offer_id":51550723440886,"sku":"APL134031-V4","price":2894.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1284201_apl134031.png?v=1787799469"},{"product_id":"apl987907","title":"Navisafe - Navilight 360° - White, 2NM, w\/ RAILBLAZA Base","description":"\u003ch4\u003eA Beacon on the Waves: Navilight All-White Overview\u003c\/h4\u003e\n\u003cp\u003eDive into the world of unparalleled marine lighting with the Navilight All-Around white RB 2NM. Approved by the US Coast Guard for 2 nautical miles, this Navisafe gem stands out as a beacon of versatility amidst the vast expanse of the seas. Designed not just as a navigation light, but also as a masthead, sternlight, flashing beacon, anchoring luminary, and even a cozy cabin light, its brilliance is both literal and metaphorical. Encompassing super bright LED technology and built to float on water, it's an embodiment of resilience. The special star-shaped base ensures compatibility with many Anchor Winches and Winches, but its true home is with the innovative RAILBLAZA StarPort Mounting system. Brought to you by the geniuses at RAILBLAZA, a trusted name from the shores of New Zealand.\u003c\/p\u003e\n\u003ch4\u003eThe Tech Behind the Luminescence: Technical Specifications\u003c\/h4\u003e\n\u003cp\u003eNavilight boasts a versatile lighting range which includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e360° All-round light\u003c\/li\u003e\n\u003cli\u003e225° Masthead light\u003c\/li\u003e\n\u003cli\u003e135° Sternlight\u003c\/li\u003e\n\u003cli\u003eFlashing light\u003c\/li\u003e\n\u003cli\u003eAnchoring light\u003c\/li\u003e\n\u003cli\u003eCabin light\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt’s battery operated, and radiates super bright LED light. Furthermore, it's waterproof and even manages to float!\u003c\/p\u003e\n\u003ch4\u003eMounting Mastery: RAILBLAZA Integration\u003c\/h4\u003e\n\u003cp\u003eThis Navilight is not just a standalone genius. It’s built to fit seamlessly with the RAILBLAZA StarPort Mounting system - an easy-to-use mounting marvel for boats, ATVs, RVs, or trailers, crafted in the lush landscapes of New Zealand.\u003c\/p\u003e\n\u003ch4\u003eShining Examples: Usage Scenarios\u003c\/h4\u003e\n\u003cp\u003eThe Navilight All-White can be employed in a myriad of ways:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower driven vessels (12M \u0026lt; length \u0026lt; 50M):\u003c\/strong\u003e Sternlight, All-round white light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower driven vessels (length \u0026lt; 12M):\u003c\/strong\u003e Masthead light, Sternlight, All-round white light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower driven vessels (length \u0026lt; 7M \u0026amp; speed = 7 knots):\u003c\/strong\u003e All-round white light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRowing \/ Paddle vessels:\u003c\/strong\u003e All-round white light\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchored vessels and those aground:\u003c\/strong\u003e All-round white light (Note: Anchor lights are mandatory from sunset to sunrise.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Spectrum of Navilight: Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUS Coast Guard approval for 2 nautical miles\u003c\/li\u003e\n\u003cli\u003eMultiple light modes including Masthead, Sternlight, and Flashing\u003c\/li\u003e\n\u003cli\u003eBattery-operated with bright LED glow\u003c\/li\u003e\n\u003cli\u003eWaterproof and buoyant - it floats!\u003c\/li\u003e\n\u003cli\u003ePerfect integration with RAILBLAZA mounting systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550727045366,"sku":"APL987907","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698414_apl987907_jpeg.jpg?v=1787799679"},{"product_id":"apl290543","title":"Lopolight Starboard Sidelight, 3 NM, 112.5°, Vertical Mount, 10-32V DC, IP68, COLREG72, USCG","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 301-101 Series is a 3 NM green starboard sidelight with a vertical mount for vessels over 50 m (164 ft). It runs on 10-32 VDC, so it suits both 12 V and 24 V DC systems, and it carries an IP68 rating for wet decks, washdowns, and weather exposure.\u003c\/p\u003e\u003cp\u003eThis is a 112.5 degree starboard light with intensity rated over 15 cd. Single stack versions use a 92.5 x 28 x 49.7 mm body, while double stack versions use a 100 x 100 x 49.7 mm body. The light is supplied pre-cabled with a 2.5 m shielded lead for routing into the structure before making your final connections.\u003c\/p\u003e\u003cp\u003eApprovals include COLREG72 and EN14744, with additional approvals listed for IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGreen starboard sidelight with a 3 NM visibility rating and a 112.5 degree sector\u003c\/li\u003e\n\u003cli\u003e10-32 VDC input range for common 12 V and 24 V DC onboard systems\u003c\/li\u003e\n\u003cli\u003eIP68-rated enclosure for exposure to spray and washdowns\u003c\/li\u003e\n\u003cli\u003eVertical mounting format for superstructure sides and pilothouse wings\u003c\/li\u003e\n\u003cli\u003eSingle stack body size 92.5 x 28 x 49.7 mm; double stack body size 100 x 100 x 49.7 mm\u003c\/li\u003e\n\u003cli\u003eSupplied with a 2.5 m shielded cable lead for clean internal routing\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -25°C to 55°C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis series is offered with different housing finishes and in two housing styles: Single Stack and Double Stack.\u003c\/p\u003e\u003cp\u003eFinish options include Silver, Black, and White. The stack style changes the housing footprint and the space you have for cable routing behind the mounting surface, while the core function stays the same: a green starboard sidelight with 3 NM visibility, 10-32 VDC operation, IP68 sealing, and vertical mounting.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 navigation light, pre-cabled with a 2.5 meter shielded cable\u003c\/li\u003e\n\u003cli\u003e2 mounting screws (M6 x 8 mm)\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on the starboard side where it has an unobstructed view across its 112.5 degree sector. Keep the body square and truly vertical, then route the pre-attached cable into a dry interior space before making splices or terminations. Any hull or house penetration should be sealed to suit your build and the mounting location.\u003c\/p\u003e\u003cp\u003eElectrical hookup is straightforward on 10-32 VDC systems. Confirm polarity at the connection point and protect the wiring in a way that matches your vessel standards and the circuit already feeding navigation lights.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing is aluminum with a finish that matches the variant (anodized on Silver and Black, ceramic coated on White). The lens uses PMMA, and the supplied mounting screws are stainless. The IP68 rating supports use in exposed locations where spray, rain, and deck wash are part of normal operation.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis light is a practical match for yachts and commercial vessels that need a 3 NM starboard sidelight on a vertical surface, especially on larger builds where the fixture sits high and stays exposed. It also suits refits where you want a defined footprint and a pre-cabled lead that can be routed inside the superstructure without adding external junction boxes.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Single Stack \/ Black","offer_id":51550727241974,"sku":"APL290543-V1","price":1357.35,"currency_code":"USD","in_stock":true},{"title":"Single Stack \/ White","offer_id":51550727274742,"sku":"APL290543-V5","price":1459.47,"currency_code":"USD","in_stock":true},{"title":"Double Stack \/ Silver","offer_id":51550727307510,"sku":"APL290543-V3","price":2591.35,"currency_code":"USD","in_stock":true},{"title":"Single Stack \/ Silver","offer_id":51550727340278,"sku":"APL290543-V4","price":1357.35,"currency_code":"USD","in_stock":true},{"title":"Double Stack \/ Black","offer_id":51550727373046,"sku":"APL290543-V2","price":2591.35,"currency_code":"USD","in_stock":true},{"title":"Double Stack \/ White","offer_id":51550727405814,"sku":"APL290543-V6","price":2786.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1284243_apl290543.png?v=1787799694"},{"product_id":"apl894805","title":"Lopolight Double-Stacked 360° Navigation Light, 3NM, White Light, Silver Anodized, 10-32VDC, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 300-112G2ST is a 3 nautical mile, 360° all-round white navigation light with a double-stacked light output, made for horizontal mounting on larger vessels. It runs on 10-32VDC for 12V and 24V systems, draws 4.2W (270mA at 12V, 176mA at 24V), and carries an IP68 rating for exposed masthead installations.\u003c\/p\u003e\u003cp\u003eThe body measures Ø92.5mm x 96.5mm and weighs 1.31kg. Construction uses silver anodized aluminum (25µ) with a PMMA lens, A4 stainless steel screws, and fully sealed internal components with epoxy and polyurethane. Approval coverage includes COLREG72 along with EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR.\u003c\/p\u003e\u003cp\u003eThis style of 360° light is used where you need an all-round white arc with clear visibility and minimal shadowing from antennas or rigging. It is a solid fit for yachts and commercial builds over 50m where a 3nm, double white all-round light is part of the navigation light plan.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e360° all-round white light with double-stacked output, rated for 3 nautical miles\u003c\/li\u003e\n\u003cli\u003e10-32VDC input for 12V and 24V systems; 4.2W draw (270mA at 12V, 176mA at 24V)\u003c\/li\u003e\n\u003cli\u003eIP68-rated sealing for weather exposure, washdowns, and saltwater operation\u003c\/li\u003e\n\u003cli\u003eHorizontal mounting on an aluminum base with cable routing option to the side or straight down\u003c\/li\u003e\n\u003cli\u003eCompact footprint (Ø92.5mm x 96.5mm) with a 1.31kg assembly weight\u003c\/li\u003e\n\u003cli\u003ePlug connector connection for clean integration into a nav-light harness\u003c\/li\u003e\n\u003cli\u003eSilver anodized aluminum finish (25µ) with PMMA lens and A4 stainless fasteners\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, and LR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light assembly with aluminum base\u003c\/li\u003e\n\u003cli\u003eHDPE base plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so the light has a true 360° view with as little blockage as possible from antennas, domes, stays, or hardtops. Because the unit is specified for horizontal mounting, install it on a level surface and tighten fasteners evenly to keep the base sitting flat.\u003c\/p\u003e\u003cp\u003ePower is DC in the 10-32V range. The minimum feed wire gauge is 0.5mm2 (AWG22). Use a protected navigation-light circuit, keep connections dry inside the mast or structure, and route the cable away from heat and high-current motor runs where practical.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is intended for vessels over 50m and is commonly used in setups that call for a double white all-round light arrangement. Verify your vessel’s navigation-light plan and mounting height requirements before drilling, especially on commercial builds where the light arrangement is tied to compliance documentation.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue from the housing and lens as part of regular washdowns and wipe the lens with a soft cloth to keep the light output clean. Periodically check fasteners for tightness and inspect the connector for a secure, dry fit after heavy weather or mast work.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Default Title","offer_id":51550729797878,"sku":"APL894805","price":2531.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281377_apl894805.png?v=1787799846"},{"product_id":"apl228337","title":"Navisafe - Navilight - 2NM, Tricolor, w\/Navimount Base \u0026 Vertical Mount, White","description":"\u003ch4\u003eThe Alluring Navilight 2NM Experience\u003c\/h4\u003e\n\u003cp\u003eIlluminate your marine journey with the Navilight 2NM Tricolor equipped with the Navimount Base \u0026amp; Vertical Mount in pristine White. Whether you're aboard an inflatable boat, canoe, or steering a kayak, our Navilight ensures you sail safely and vibrantly.\u003c\/p\u003e\n\u003ch4\u003eExceptional Features for Avid Sailors\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTricolor Masthead light radiating 135° white, 112.5° red, and 112.5° green with an impressive 12 hour burn time\u003c\/li\u003e\n\u003cli\u003eDistinct BiColor side light boasting a 20 hour burn time\u003c\/li\u003e\n\u003cli\u003eA dedicated Red side light that lasts up to 38 hours\u003c\/li\u003e\n\u003cli\u003eLustrous Green side light also with a 38 hour burn time\u003c\/li\u003e\n\u003cli\u003eClear White Sternlight that goes on for 32 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eUnveiling the Navimount Vertical in White\u003c\/h4\u003e\n\u003cp\u003eThis Navimount Vertical edition is intricately designed to fix the Navimount Pole or the Navilights with its base, making it ideal for vertical surfaces. Whether you're thinking of the back of an inflatable boat, the cozy cockpit of a canoe or kayak, or even a sleek steering console, this vertical mount is your perfect pick.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne efficient Vertical Mount\u003c\/li\u003e\n\u003cli\u003eTwo robust self-tapping stainless steel screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550744477942,"sku":"APL228337","price":159.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698391_apl228337_jpeg.jpg?v=1787800192"},{"product_id":"apl752448","title":"Seaview 12\" White Light Post With LTBLED12 Nav Light SVLTP12LED","description":"\u003cp\u003e\u003cb\u003eSeaview SVLTP12LED 12\" Light Post with LTBLED12 Navigation Light\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eModel: SVLTP12LED\u003c\/p\u003e\n\u003cp\u003eSeaview's light posts come in various height options to clear any obstructions as needed. These powder coated aluminum light posts are 1.25\" in diameter with a 2.75\" round base plate.\u003c\/p\u003e\n\u003cp\u003eIncludes LTBLED12 round Seaview 3NM LED combination mast head allround light.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cb\u003eWhat's in the Box:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eSVLTP12 12\" Light Post\u003c\/li\u003e\n\u003cli\u003eLTBLED12 Navigation Light\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Seaview","offers":[{"title":"Default Title","offer_id":51550763581686,"sku":"APL752448","price":192.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1115953_apl752448jpg.jpg?v=1787800595"},{"product_id":"apl292304","title":"Hella Marine 2984 Starboard Navigation Light, Incandescent, 12V, 2nm, IP55","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 2984 series is a starboard-side incandescent navigation light with 2 nautical mile visibility for 12V systems. It mounts on a vertical surface and uses a green lens to clearly mark your starboard side at night or in reduced visibility.\u003c\/p\u003e\u003cp\u003eThe housing snaps onto the base without external screws, which makes routine bulb checks and servicing less fiddly in tight mounting spots. Inside, the bulb hangs vertically and the electrical contacts sit higher in the lamp to help keep the contact area away from the damp, salty grime that builds up over time.\u003c\/p\u003e\u003cp\u003eThis light is IP55 rated for dust and water spray and is approved for common marine navigation-light requirements, including IMO Col Reg 72, USCG, ABYC A-16, and Maritime NZ.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eStarboard navigation light with a green lens and a 2 nautical mile rated visibility range\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12V incandescent setup using a 25W BAY15d bulb\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP55 rated sealing for dust and water spray in typical on-deck mounting locations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCable entry through the base plate with a rubber grommet to help protect the wire pass-through\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHousing snaps to the base without external screws for quicker access during servicing\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNon-magnetic, saltwater-resistant construction suited to common marine mounting areas\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBulb orientation and contact placement are arranged to help reduce corrosion at the connections\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple configurations with different housing colors.\u003c\/p\u003e\u003cp\u003eThe housing color changes between variants; core specs such as 12V power, 2 nautical mile visibility, and IP55 protection remain consistent.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer\" href=\"tel:002984345\"\u003e002984345\u003c\/a\u003e: Black housing. Fits cleanly alongside darker rails, rub rails, and trim, and keeps the fixture visually low-key on the topsides.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003ca target=\"_blank\" rel=\"noopener noreferrer\" href=\"tel:002984395\"\u003e002984395\u003c\/a\u003e: White housing. Blends in with white gelcoat, cabin sides, and lighter deck hardware for a more uniform look.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the base to a suitable vertical surface on the starboard side where the light has an unobstructed view and the correct sector visibility. Route the supply wiring through the base plate entry and seat the rubber grommet so the pass-through stays protected from spray.\u003c\/p\u003e\u003cp\u003eOn most boats this ties into the navigation-light circuit at 12V. Confirm your system voltage before ordering, since this version is intended for 12V installations.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior after heavy salt exposure and check the lens for buildup that can block light output. If the light stops working, inspect the bulb and the contact area, then reseat the snapped housing so it locks down evenly.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eStarboard navigation light assembly\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12V \/ 25W BAY15d incandescent bulb\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"White Housing","offer_id":51550784749814,"sku":"APL292304-V5","price":77.16,"currency_code":"USD","in_stock":true},{"title":"Black Housing","offer_id":51550784782582,"sku":"APL292304-V9","price":75.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715857_apl292304.jpg?v=1787800999"},{"product_id":"apl140718","title":"Lopolight Starboard Navigation Light, LED, 1 NM, Vertical Mount, 10-32VDC, IP68, 6 m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 101-001 Series is a 1 NM starboard sidelight with a 112.5° green sector for vertical mounting on vessels up to 12 m (39.4 ft). It runs on 10-32 VDC so it fits both 12V and 24V systems, and these configurations come prewired with a 6 m shielded marine-grade cable for longer runs.\u003c\/p\u003e\u003cp\u003eThe housing is anodized aluminum with a PMMA lens and A4 stainless steel screws, and the unit is sealed to an IP68 rating for wet decks and washdowns. Power draw is 1.1 W (about 66 mA at 12V, 34 mA at 24V), and the body measures 92.5 x 28 x 49.7 mm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStarboard sidelight with green output and a 112.5° sector for COLREG72 running light requirements\u003c\/li\u003e\n\u003cli\u003e1 NM visibility rating for vessels under 12 m (39.4 ft)\u003c\/li\u003e\n\u003cli\u003e10-32 VDC input range for 12V or 24V electrical systems\u003c\/li\u003e\n\u003cli\u003eIP68 sealing for heavy spray, rain, and washdowns\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum body with PMMA lens and A4 stainless steel screws\u003c\/li\u003e\n\u003cli\u003eLow electrical load: 1.1 W (66 mA at 12V, 34 mA at 24V)\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 92.5 x 28 x 49.7 mm\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -25°C to 55°C\u003c\/li\u003e\n\u003cli\u003eApproved to COLREG72, EN14744, IEC 60945, IACS E10, USCG, ABS, M.E.D., DNV, LR\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in two finish options, both supplied with the extended 6 m cable.\u003c\/p\u003e\u003cp\u003eThe listed difference between these configurations is the housing finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101-001 6M: Finish Silver. Blends well with stainless rail hardware and natural aluminum trim.\u003c\/li\u003e\n\u003cli\u003e101-001-B 6M: Finish Black. Sits quieter against dark window frames, hardtops, and painted cabin sides.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the light on the starboard side on a vertical surface where the 112.5° sector stays clear. Before drilling, check sight lines from ahead and abeam so rails, canvas, bow rollers, or fenders do not block the light sector.\u003c\/p\u003e\u003cp\u003eRoute the attached cable to a dry connection point and leave a small service loop so the light can be removed for service without cutting wiring.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect to your navigation light circuit on 10-32 VDC. Minimum feed wire gauge is 0.5 mm2 (AWG 22); for long runs, step up wire size to manage voltage drop, especially on 12V systems.\u003c\/p\u003e\u003cp\u003eThe attached shielded cable is helpful when the run passes near other onboard wiring and when you want a clean pull through conduits and lockers.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for smaller powerboats, sailboats, and tenders that need a compact starboard sidelight on a cabin side, deckhouse, or a vertical face near the bow. It also suits refits where you want LED navigation lighting with low draw and a sealed housing for year-round exposure.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light with 6 m shielded marine-grade cable attached\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lopolight","offers":[{"title":"Silver","offer_id":51550786650358,"sku":"APL140718-V1","price":410.79,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51550786683126,"sku":"APL140718-V2","price":410.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1311914_apl140718.png?v=1787801072"},{"product_id":"apl035032","title":"Hella Marine Apelo A1 Underwater LED Light, 1800 Lumen, 9-32V, IP68\/IP69, Surface Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine Apelo A1 is a surface-mount underwater light for transom installations, built to put usable light into the water for docking, swimming, and night-time visibility around the stern.\u003c\/p\u003e\u003cp\u003eIt runs on Multivolt 9-32V DC (12\/24V nominal) and produces up to 1800 lumen (white output). The housing is sealed to IP68 \/ IP69K for operation while submerged and for high-pressure washdowns.\u003c\/p\u003e\u003cp\u003eAcross the range you get the same compact A1 format with a corrosion-proof thermal polymer base, a UV-stable Grilamid lens, and 2.5 m (8.2 ft) of 2-core tinned marine cable for a clean run into the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMultivolt input: 9-32V DC (12\/24V nominal) for mixed battery setups and charging voltage swings\u003c\/li\u003e\n\u003cli\u003eOutput up to 1800 lumen (white) for practical waterline illumination at the stern\u003c\/li\u003e\n\u003cli\u003eIP68 \/ IP69K sealed construction for in-water operation and high-pressure washdowns\u003c\/li\u003e\n\u003cli\u003eThermal polymer base and UV-stable Grilamid lens to handle sun exposure and the marine environment\u003c\/li\u003e\n\u003cli\u003e2.5 m (8.2 ft) 2-core tinned marine cable for corrosion-resistant wiring runs\u003c\/li\u003e\n\u003cli\u003ePower draw depends on light color: Blue\/White 20W (1.7A @ 12V, 0.9A @ 24V); RGB 15W (1.25A @ 12V, 0.7A @ 24V)\u003c\/li\u003e\n\u003cli\u003eVoltage protection built in: spike protected to +500V and reverse polarity protected to -700V\u003c\/li\u003e\n\u003cli\u003eEngineered to suppress potential interference with onboard electronics like radios and chart plotters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations.\u003c\/p\u003e\u003cp\u003eVariants differ by trim lens color (White Lens or Charcoal Lens) and by light color (RGB or Blue\/White). Power consumption varies by light color as listed above.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e016146011: White Lens trim with RGB light output. The white trim keeps a lighter look on the transom, while RGB output supports color selection when paired with an analogue RGB controller.\u003c\/li\u003e\n\u003cli\u003e016146001: Charcoal Lens trim with RGB light output. The darker trim blends in on many modern hulls, while RGB output supports color selection when paired with an analogue RGB controller.\u003c\/li\u003e\n\u003cli\u003e016145011: White Lens trim with Blue\/White light output. The white trim keeps a lighter look on the transom, and Blue\/White output is suited to straightforward on-board lighting with a clean, functional glow.\u003c\/li\u003e\n\u003cli\u003e016145001: Charcoal Lens trim with Blue\/White light output. The darker trim blends in on many modern hulls, and Blue\/White output is suited to straightforward on-board lighting with a clean, functional glow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a transom surface-mount light, so it fits where you want waterline illumination without building a pocket into the hull. Plan the position so the light face sits flush against a fair surface and the cable route lands in a dry, protected space inside.\u003c\/p\u003e\u003cp\u003eUse marine sealing practice at the fasteners and cable pass-through, and leave enough service loop inside the boat to access connections later without pulling on the lamp.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe Apelo A1 operates across 9-32V DC and is supplied with 2-core tinned marine cable for power. Keep the supply protected with a properly sized circuit and route wiring away from sharp edges and heat sources.\u003c\/p\u003e\u003cp\u003eRGB variants support external control from an analogue RGB controller for color selection. Blue\/White variants provide white and blue output in the same fixture for a more straightforward lighting setup.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eOn cruisers and fishing boats, this style of underwater light is commonly used to light the stern for boarding, docking, rinsing down, and checking lines or gear after dark. It also suits owners who want lighting that stays consistent across 12V and 24V systems and can handle routine washdowns.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior after saltwater use and clean the lens with mild soap and water. Avoid abrasive pads or harsh solvents that can haze the lens over time, and periodically check that wiring is supported and that sealing points remain sound.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"White Lens \/ Blue\/White","offer_id":51550838784246,"sku":"APL035032-V9","price":232.56,"currency_code":"USD","in_stock":true},{"title":"Charcoal Lens \/ RGB","offer_id":51550838817014,"sku":"APL035032-V8","price":303.55,"currency_code":"USD","in_stock":true},{"title":"White Lens \/ RGB","offer_id":51550838849782,"sku":"APL035032-V5","price":303.55,"currency_code":"USD","in_stock":true},{"title":"Charcoal Lens \/ Blue\/White","offer_id":51550838882550,"sku":"APL035032-V10","price":232.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1266505_apl035032_jpeg.jpg?v=1787802347"},{"product_id":"apl627347","title":"Lunasea Rechargeable Tri-Color Portable Navigation Light (No Mount) - Black LLB-72BK-UB-00","description":"\u003cp\u003e\u003cstrong\u003eRechargeable Tri-Color Portable Navigation Light (No Mount) - Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFully portable, fully waterproof, USCG certified, and it floats!\u003c\/p\u003e\n\u003cp\u003eThe Lunasea Portable Nav light is a rechargeable lithium polymer battery-powered navigation LED fixture designed for rugged marine use and harsh outdoor conditions. Designed to work with both RAILBLAZA™ , Navimount™ , and Go-Pro™ mounting systems.\u003c\/p\u003e\n\u003cp\u003eThe light boasts a bright, steady light that’s US Coast Guard-approved for visibility up to 2 nautical miles. It offers six selectable light modes.\u003c\/p\u003e\n\u003cp\u003eEasy to mount and operate, making it a reliable companion for various activities: sailing, paddling, surfing, jet skiing, or rowing on lakes or rivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 Modes, Tri, Bi, Red, Green, Stern, Flash\u003c\/li\u003e\n\u003cli\u003e1800maH Lithium Polymer Rechargeable Battery\u003c\/li\u003e\n\u003cli\u003eWaterproof and Floats if dropped in water\u003c\/li\u003e\n\u003cli\u003eNo more wasting batteries\u003c\/li\u003e\n\u003cli\u003eCertified ABYC A-16, 2NM\u003c\/li\u003e\n\u003cli\u003e2-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lunasea Lighting","offers":[{"title":"Default Title","offer_id":51550842093814,"sku":"APL627347","price":125.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1112324_apl627347jpg.jpg?v=1787802485"},{"product_id":"apl238609","title":"Scotty 838 LED Sea-Light w\/Fold Down Pole \u0026 Ball Mount 0838","description":"\u003cp\u003e\u003cstrong\u003e838 LED Sea-Light with Fold Down Pole \u0026amp; Ball Mount\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Scotty Ball System joint design enables a smooth and complete full range of motion for the Sea-Light\u003c\/li\u003e\n\u003cli\u003eThe corrosion proof construction of this system provides a long service life in both fresh and salt water applications as it is designed with stainless steel fasteners and a stainless pole\u003c\/li\u003e\n\u003cli\u003eIncludes ACR detachable, fully sealed LED C-Light™\u003c\/li\u003e\n\u003cli\u003eIncludes a bright 20 Lumen White LED for location assistance during emergencies\u003c\/li\u003e\n\u003cli\u003eEasy twist ON\/OFF activation that is waterproof tested\u003c\/li\u003e\n\u003cli\u003eImpact resistant construction and is USCG\/SOLAS Approved\u003c\/li\u003e\n\u003cli\u003eC-Light™ is easily removed and can be attached to life jackets, backpacks or hang from a pocket\u003c\/li\u003e\n\u003cli\u003eC-Light™ requires two “AA” 1.5V batteries (batteries not included)\u003c\/li\u003e\n\u003cli\u003eC-Light™ has an extensive and continuous operating life for over 30 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase Mount Dimensions: 2 1\/4' x 2 1\/4'\u003c\/li\u003e\n\u003cli\u003eOverall Height: Stands 41' tall\u003c\/li\u003e\n\u003cli\u003eSea-Light Pole Diameter: 1\/2”\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Scotty","offers":[{"title":"Default Title","offer_id":51550842814710,"sku":"APL238609","price":108.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1096466_apl238609jpg.jpg?v=1787802514"},{"product_id":"apl577492","title":"Sea-Dog - Foldable All-Around LED Light - For Pontoon Boat","description":"\u003ch4\u003eNavigate with Confidence: Sea-Dog's LED Fold Down All Around Light for Your Pontoon Boat\u003c\/h4\u003e\n\u003cp\u003eIlluminate your evenings on the water with the Sea-Dog LED Fold Down All Around Light, specifically designed for pontoon boats. This compact, efficient lighting solution is USCG approved for 2 NM (Colreg 2 mile), ensuring maximum visibility and safety. Constructed from durable injection molded nylon and aluminum, and designed to mount on 1-1\/4\" square tubing, it's the perfect blend of robustness and functionality. The fold-down feature offers versatility, while the low amp draw ensures minimal battery consumption. Easy to install with three #10 FH fasteners (not included), it's an essential upgrade for any pontoon boat.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSCG approved for 2 NM, ensuring compliance and safety on the water.\u003c\/li\u003e\n\u003cli\u003eDesigned to mount on 1-1\/4\" square tubing, ideal for pontoon boats.\u003c\/li\u003e\n\u003cli\u003eMade from injection molded nylon and aluminum for durability.\u003c\/li\u003e\n\u003cli\u003eFold down mechanism allows for easy storage and prevents damage when not in use.\u003c\/li\u003e\n\u003cli\u003eLow amp draw conserves battery life, making it efficient and eco-friendly.\u003c\/li\u003e\n\u003cli\u003eWARNING: Contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eDesigned for Durability and Ease\u003c\/h4\u003e\n\u003cp\u003eEngineered with high-quality materials to withstand the marine environment, this light offers reliability and longevity.\u003c\/p\u003e\n\u003ch4\u003eEfficient and Eco-Friendly Lighting\u003c\/h4\u003e\n\u003cp\u003eWith its low amp draw, this LED light minimizes battery consumption, providing long-lasting illumination without draining your resources.\u003c\/p\u003e\n\u003ch4\u003eEasy Installation and Versatile Use\u003c\/h4\u003e\n\u003cp\u003eSimple to mount and easy to fold down, this light is designed for the ultimate convenience and adaptability on your pontoon boat.\u003c\/p\u003e\n\u003ch4\u003eEnsuring Safety and Compliance\u003c\/h4\u003e\n\u003cp\u003eMeet and exceed USCG regulations for navigational lighting, ensuring your nighttime ventures are both safe and lawful.\u003c\/p\u003e\n\u003ch4\u003eChoose Your Ideal Length\u003c\/h4\u003e\n\u003cp\u003eAvailable in both 9\" and 24\" variations, select the size that best fits your pontoon boat's specific needs and preferences.\u003c\/p\u003e","brand":"Sea-Dog","offers":[{"title":"24\"","offer_id":51550843175158,"sku":"APL577492-V5","price":95.95,"currency_code":"USD","in_stock":false},{"title":"9\"","offer_id":51550843207926,"sku":"APL577492-V7","price":77.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0711884_apl577492.jpg?v=1787802526"},{"product_id":"apl401681","title":"Innovative Lighting Portable LED Bow Light f\/Inflatables 560-1112-7","description":"\u003cb\u003eBattery Navigation Light\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eRequires 4 AA batteries (not included)\u003c\/li\u003e\n\u003cli\u003eMolded one piece body construction\u003c\/li\u003e\n\u003cli\u003eShock resistant neoprene accents\u003c\/li\u003e\n\u003cli\u003eRated at 100,000 hours LED service life\u003c\/li\u003e\n\u003cli\u003eLED uses 90% less energy than incandescent\u003c\/li\u003e\n\u003cli\u003eSealed heavy duty On\/Off switch\u003c\/li\u003e\n\u003cli\u003eInsert molded brass threaded mounting bushings\u003c\/li\u003e\n\u003cli\u003eRemovable lamp carriage assembly\u003c\/li\u003e\n\u003cli\u003e6.18\" x 2.53\"\u003c\/li\u003e\n\u003cli\u003eMounting style: Inflatable - 2\" pole, lanyard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Innovative Lighting","offers":[{"title":"Default Title","offer_id":51550853234934,"sku":"APL401681","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1104505_apl401681jpg.jpg?v=1787802778"},{"product_id":"apl468373","title":"Navisafe - Navilight 360° - 2NM, w\/Navibolt Base \u0026 Horizontal Mount, Black","description":"\u003ch4\u003eIlluminate Your Adventures: Navlight 360° Overview\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eNavlight 360° 2NM w\/Navibolt Base \u0026amp; Horizontal Mount - Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiscover the versatility of the Navlight 360° with Navibolt Base, a portable all-round white light solution designed to seamlessly integrate with the Navisafe Navimount system. Engineered to be durable and robust, it promises a low and snug fit with any Navimount.\u003c\/p\u003e\n\u003ch4\u003eDive into the Details: Technical Know-How\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUSCG Approval: 2 Nautical Miles\u003c\/li\u003e\n\u003cli\u003eOperational Modes: 5 Modes with 360° Capability\u003c\/li\u003e\n\u003cli\u003eBuoyancy: Floats with light facing up\u003c\/li\u003e\n\u003cli\u003eWater Resistance: Submersible up to 20M \/66'\u003c\/li\u003e\n\u003cli\u003eEndurance: Corrosion resistant design\u003c\/li\u003e\n\u003cli\u003ePower Source: Three AAA batteries (not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMode Magic: Diverse Lighting Solutions\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e360° Constant: 16 White LED lights \/ 13 - 15hrs\u003c\/li\u003e\n\u003cli\u003e360° Flashing: 16 White LED lights \/ 80 - 85hrs\u003c\/li\u003e\n\u003cli\u003eForward Shine: 10 White LED 225° lights \/ 22 - 24hrs\u003c\/li\u003e\n\u003cli\u003eBackward Glow: 6 White LED 135° lights \/ 30 -32hrs\u003c\/li\u003e\n\u003cli\u003eSoft Luminescence: 4 White LED 360° Dim function \/ 70 - 72hrs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAdaptable Attachments: Navimount Horizontal - Black\u003c\/h4\u003e\n\u003cp\u003eThe Navimount Horizontal is a unique attachment, tailor-made to secure the Navimount Pole or Navilights with a Navimount base (models 040, 340) to horizontal expanses, such as boat decks or cabin roofs.\u003c\/p\u003e\n\u003ch4\u003eWhat’s in the Box?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNavimount Horizontal Mount\u003c\/li\u003e\n\u003cli\u003eStainless Steel Screws: Two self-tapping screws for secure mounting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Navisafe","offers":[{"title":"Default Title","offer_id":51550874403062,"sku":"APL468373","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0698404_apl468373_jpeg.jpg?v=1787803210"},{"product_id":"apl197813","title":"Lumitec Composite Surface-Mount Starboard Green Nav Light, 10-30V, 2NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101597 is a navigation light with starboard (green) output that runs on 10 to 30 VDC and meets USCG requirements for 2 nautical mile visibility. It also meets ABYC A-16 navigation lighting standards.\u003c\/p\u003e\u003cp\u003eThis is the composite, surface-mount style meant for horizontal mounting surfaces when you do not have a molded-in recess. It measures about 2.51 in wide by 2.19 in tall and stands about 0.95 in off the surface, which helps it fit cleanly on a bow cap, gunwale, or hardtop edge.\u003c\/p\u003e\u003cp\u003eInstall it on the starboard side near the bow and keep the lens clear of obstructions so the required sector is not blocked by rails, the hull, deck structures, or onboard hardware under normal running trim.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eStarboard green sidelight output for a standard running-light setup\u003c\/li\u003e\n\u003cli\u003eMeets USCG requirements for 2 nautical mile visibility\u003c\/li\u003e\n\u003cli\u003eAccepts 10 to 30 VDC for 12 V and 24 V electrical systems\u003c\/li\u003e\n\u003cli\u003eComposite, surface-mount body suited to horizontal mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact size: about 2.51 in x 2.19 in overall, about 0.95 in tall\u003c\/li\u003e\n\u003cli\u003eMeets ABYC A-16 navigation lighting standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the orientation template to keep the starboard unit aligned correctly on the vessel, then pre-drill for #6 tapping screws. Route the power wire through the wire exit hole and seal around the cable with a marine sealant to help keep spray out.\u003c\/p\u003e\u003cp\u003eFeed the light from a fused navigation-light circuit and verify the light is not shaded by fixed structures or gear once the boat is loaded and trimmed the way you normally run.\u003c\/p\u003e\u003ch6\u003eWho it fits\u003c\/h6\u003e\u003cp\u003eThis light is a practical choice for boats that need a low-profile sidelight on a flat mounting surface and operate on a 12 V or 24 V DC system.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":51550898716918,"sku":"APL197813","price":149.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281380_apl197813.jpg?v=1787803859"},{"product_id":"apl638459","title":"Perko Omega Series LED Universal Replacement White All-Round Pole Light, 12V, 2 nm, Fold-in-Half Pole, 3\/4 in Anodized Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Perko Omega Series is an LED universal replacement white all-round pole light with a fold-in-half pole for power driven vessels under 20 meters, or 65.6 feet, in length. It is a 12 Volt LED navigation light with 2-Mile USCG 2nm certification, a 4.5 watt draw, and .35 amp current draw, giving boat owners a practical replacement option for stern or all-round light positions that need compliant visibility without the heat and power use of older incandescent pole lights.\u003c\/p\u003e\u003cp\u003eThe reduced-glare globe helps cut down light spill at the helm at night, while the adjustable head lets the light be leveled horizontally even when the base angle is not perfectly flat. The universal replacement layout includes two collar styles and two key slot screw positions, so it can match a wider range of common plug-in pole bases already installed on many boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite LED all-round light with 2-Mile USCG 2nm certification for power driven vessels under 20 meters in length.\u003c\/li\u003e\n\u003cli\u003e12 Volt LED operation with 4.5 watts and .35 amps, useful for boats where lower current draw matters during night running or anchoring.\u003c\/li\u003e\n\u003cli\u003eFold-in-half pole helps with storage and handling when the light is removed between trips.\u003c\/li\u003e\n\u003cli\u003eWide 40 degree adjustable head, with 20 degrees of movement each way, helps level the globe on different base angles and custom bent pole setups.\u003c\/li\u003e\n\u003cli\u003eDP packaged universal fit includes threaded and locking collars, plus two key slot screw positions, for compatibility with more existing pole light bases.\u003c\/li\u003e\n\u003cli\u003e3\/4 inch diameter anodized tube and polymer top suit the exposed location where all-round pole lights are normally used.\u003c\/li\u003e\n\u003cli\u003eLED construction gives vibration resistance, low operating temperature, low power drain, and a light source sealed from the environment.\u003c\/li\u003e\n\u003cli\u003eFits Perko locking collar bases 1045, 1046, 1047, 1059, and 1060, and Perko large threaded collar base 1048.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two pole-length configurations. Both variants use the same Perko Omega Series LED universal replacement all-round light format and differ by pole length.\u003c\/p\u003e\u003cp\u003eThe 48 inch version is a shorter pole option for installations where the all-round light already clears the windshield, hardtop, engine cover, or other onboard obstructions. The 60 inch version adds height for boats that need extra elevation to keep the light visible above the cockpit, seating, canvas, or equipment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1348DP8CHR: Pole length 60 inches. This length suits installations where the light needs more height to maintain clear all-round visibility above surrounding boat structure.\u003c\/li\u003e\n\u003cli\u003e1348DP6CHR: Pole length 48 inches. This length fits boats where a lower pole gives enough clearance while keeping the removable light easier to handle and stow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light is meant for plug-in pole light replacement work where the existing base can be reused. The included collar options cover both locking and large threaded Perko 2-pin bases listed for this series, and the universal head adjustment helps correct the light angle after the pole is seated in the base.\u003c\/p\u003e\u003cp\u003eBefore ordering, match the pole length to the mounting location and make sure the light will sit high enough for an unobstructed 360 degree view. On center consoles, runabouts, fishing boats, and small cruisers, this usually means checking clearance above the windshield, bimini frame, outboard cowling, rod holders, and any gear mounted aft.\u003c\/p\u003e\u003ch6\u003eElectrical and onboard use\u003c\/h6\u003e\u003cp\u003eThe light is for 12 Volt DC systems and should be wired through the vessel navigation light circuit using the existing base and switch arrangement when compatible. Its LED load is low, which is helpful for night operation at anchor or during slow evening returns when batteries may already be supporting electronics, pumps, and cabin loads.\u003c\/p\u003e\u003cp\u003eThis is a good match for boat owners replacing an older all-round pole light with an LED unit while keeping the installation familiar. It also works well where the pole needs to be removed and stowed after use, such as on trailer boats, fishing boats, and open cockpits where loose gear and storage space matter.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLED Omega Series white all-round fold-in-half pole light\u003c\/li\u003e\n\u003cli\u003eThreaded collar\u003c\/li\u003e\n\u003cli\u003eLocking collar\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Perko","offers":[{"title":"60 Inches","offer_id":51550933450998,"sku":"APL638459-V4","price":210.0,"currency_code":"USD","in_stock":false},{"title":"48 Inches","offer_id":51550933483766,"sku":"APL638459-V5","price":206.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1328378_apl638460.webp?v=1787804941"},{"product_id":"apl178853","title":"Apollo - Stern LED Navigation Lamp - 2-3 NM, Flush Mount, White, IP68","description":"\u003ch4\u003eIlluminate and Elevate: SI Flush Mount LED Marine Navigation Lamp for the Stern\u003c\/h4\u003e\n\u003cp\u003eIntroducing the SI Flush Mount LED Marine Navigation Lamp for the Stern, a revolutionary lighting solution that combines safety and style for power-driven vessels. With its sleek design and exceptional durability, this lamp is designed to enhance your vessel's aesthetics while ensuring reliable performance on the open waters.\u003c\/p\u003e\n\u003cp\u003eThank you for choosing the SI Flush Mount LED navigation lamp for the stern of your vessel. Specifically designed for power-driven vessels up to 50m (164 ft.), our lamp is meticulously crafted to provide you with years of trouble-free performance and peace of mind during your maritime journeys.\u003c\/p\u003e\n\u003cp\u003eAppearance matters, and the SI Flush Mount LED lamp for the stern takes it to the next level. Its unique all-white flush mount design seamlessly blends with your vessel's hard top, optimizing aerodynamics and elevating the overall visual appeal. Let your vessel stand out with a sleek and modern lighting solution.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to construction, we leave no room for compromise. Our lamp is built using high-quality materials, including Sist, Balt, and PeT lenses, ensuring exceptional durability. With its IP68 standard compliance and fully potted construction, this lamp can withstand even the most challenging marine environments, guaranteeing longevity and reliability.\u003c\/p\u003e\n\u003cp\u003ePerformance is key, and the SI Flush Mount LED lamp delivers excellence in every aspect. Equipped with regulation circuitry, it maintains a constant current supply and brightness, unaffected by voltage fluctuations or spikes on your vessel. This ensures consistent illumination, enhancing safety during navigation. Furthermore, its energy-efficient design results in a low power draw, protecting your vessel's electrical system.\u003c\/p\u003e\n\u003cp\u003eInstalling the SI Flush Mount LED stern lamp is a breeze. Follow international regulations by mounting the rear of the housing parallel to the hull centerline, optimizing visibility and adhering to safety standards. To secure the lamp in place and prevent obstruction, use a suitable adhesive sealant like silicone sealant. It will maintain the lamp's position and prevent water ingress, ensuring reliable performance for years to come.\u003c\/p\u003e\n\u003cp\u003eCompliance with safety regulations is of utmost importance, and the SI Flush Mount LED stern lamp is labeled USCG2NM or USCG3NM, indicating its adherence to the applicable standards for compliant lamps. You can rest assured that your vessel meets the necessary safety requirements for stern navigation lighting.\u003c\/p\u003e\n\u003cp\u003eFor seamless connectivity, optional Deutsch connectors can be attached to the cable without any splices. Follow the correct wire gauge as per the Deutsch datasheet, and pay attention to the correct polarity for the LED lamp to function effectively, ensuring a hassle-free installation process.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to cleaning, take care to use the right products. Avoid aliphatic hydrocarbon solvents such as MEK, acetone, or benzine, as they can damage the lens and housing. Instead, opt for mild cleaners like Novus #1 Plastics Cleaner, which effectively cleans without compromising the lamp's integrity and appearance.\u003c\/p\u003e\n\u003cp\u003eElevate the safety and visual appeal of your power-driven vessel with the SI Flush Mount LED Marine Navigation Lamp for the stern. With its durable construction, reliable performance, and compliance with regulations, this lamp is the perfect choice for fulfilling your stern navigation needs.\u003c\/p\u003e\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSleek all-white flush mount design\u003c\/li\u003e\n\u003cli\u003eConstructed with high-quality materials and lenses\u003c\/li\u003e\n\u003cli\u003eIP68 standard compliance and fully potted for durability\u003c\/li\u003e\n\u003cli\u003eRegulation circuitry ensures constant current supply and brightness\u003c\/li\u003e\n\u003cli\u003eEnergy-efficient design with low power draw\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sonic Illusions","offers":[{"title":"Default Title","offer_id":51550973329654,"sku":"APL178853","price":292.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370922_apl178853_jpeg.jpg?v=1787805862"},{"product_id":"apl909843","title":"Apollo - Starboard LED Navigation Lamp - 2-3 NM, Flush Mount, Green, IP68 (SI-STG)","description":"\u003ch4\u003eIntroducing the SI Flush Mount LED Marine Navigation Lamp for the Starboard: Enhancing Safety and Style for Power Driven Vessels\u003c\/h4\u003e\n\u003cp\u003eElevate your power driven vessel's safety and style with the SI Flush Mount LED Marine Navigation Lamp designed exclusively for the starboard side. Crafted with meticulous attention to detail, this lamp guarantees reliable performance and exceptional durability, ensuring safe navigation on the open waters.\u003c\/p\u003e\n\u003cp\u003eStep aboard your vessel and embrace the alluring appearance of the SI Flush Mount LED lamp for the starboard side. Its unique flush mount design, featuring an elegant all-white exterior, effortlessly blends with your vessel's hard top, optimizing aerodynamics and enhancing the overall aesthetics with a touch of modern sophistication.\u003c\/p\u003e\n\u003cp\u003eConstructed using top-of-the-line materials such as Sist, Balt, and PeT lenses, our lamp exemplifies unwavering quality. Designed to withstand the most demanding marine environments, it meets IP68 standards and is fully potted for unrivaled durability. This ensures that your lamp can endure the harshest conditions, providing years of trouble-free performance.\u003c\/p\u003e\n\u003cp\u003eIlluminate your vessel's path with unwavering consistency using the SI Flush Mount LED lamp. Equipped with advanced regulation circuitry, it maintains a constant current supply and brightness, unaffected by voltage fluctuations or spikes. This guarantees a consistently illuminated starboard side, enhancing safety during your journeys. Moreover, our lamp excels in energy efficiency, minimizing power draw and placing minimal strain on your vessel's electrical system.\u003c\/p\u003e\n\u003cp\u003eProper installation is paramount to optimize visibility and adhere to safety standards. The SI Flush Mount LED starboard lamp should be mounted with the rear of the housing (long, flat area) parallel to the hull centerline, following international regulations. For additional guidance, consult International Annex 1, Part g. Prevent any obstructions such as rod holders, and ensure a secure installation using a suitable adhesive sealant like silicone sealant, maintaining its position and safeguarding against water ingress.\u003c\/p\u003e\n\u003cp\u003eRest easy knowing that the SI Flush Mount LED starboard lamp complies with applicable safety regulations for vessels. Labeled as USCG2NM or USCG3NM, it meets the necessary requirements to ensure the utmost safety for your starboard navigation lighting. Sail with confidence, knowing that your vessel adheres to the highest safety standards.\u003c\/p\u003e\n\u003cp\u003eFor seamless connectivity, optional Deutsch connectors can be effortlessly attached to the cable without any splices. Follow the wire gauge specifications as per the Deutsch datasheet, and pay careful attention to correct polarity to guarantee optimal functionality of the LED lamp.\u003c\/p\u003e\n\u003cp\u003eMaintaining the pristine condition of your lamp is a breeze. Safeguard the lens and housing by avoiding aliphatic hydrocarbon solvents such as MEK, acetone, or benzine during cleaning, as they can cause damage. Instead, opt for mild cleaners like Novus #1 Plastics Cleaner, ensuring safe and effective cleaning that preserves the lamp's longevity.\u003c\/p\u003e\n\u003cp\u003eElevate both safety and visual appeal with the SI Flush Mount LED Marine Navigation Lamp for the starboard side. With its durable construction, reliable performance, and unwavering compliance with safety regulations, our lamp is the perfect choice to enhance your starboard navigation needs.\u003c\/p\u003e\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReliable performance and exceptional durability for safe navigation on the open waters\u003c\/li\u003e\n\u003cli\u003eAlluring all-white flush mount appearance that blends seamlessly with your vessel's hard top\u003c\/li\u003e\n\u003cli\u003eConstructed using high-quality materials, including Sist, Balt, and PeT lenses\u003c\/li\u003e\n\u003cli\u003eMeets IP68 standards and fully potted for unrivaled durability in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sonic Illusions","offers":[{"title":"Default Title","offer_id":51550977032438,"sku":"APL909843","price":292.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370914_apl853808_jpeg.jpg?v=1787795800"},{"product_id":"apl682444","title":"Lopolight Tri-Color\/Anchor Navigation Light, Illuminated Windex Mount, 1NM, 10-32VDC, IP68, FB Flat Base","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight Tri-Color Anchor Light with Windex mount and flat base is a masthead navigation light that combines tri-color running lights, a 360° white anchor light, and an illuminated Windex mount in one housing. It is built around a 1 NM light output and runs on 10-32 VDC, so it fits typical 12 V and 24 V boat systems.\u003c\/p\u003e\u003cp\u003eOn the water, tri-color mode uses the standard sector layout: 112.5° red (port), 112.5° green (starboard), and 135° white (stern). Anchor mode switches to an all-round white 360° light. The body measures Ø92.5 mm x 86 mm and the sealed construction is rated IP68 for constant exposure at the masthead.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTri-color sectors plus 360° all-round white anchor light in a single masthead unit\u003c\/li\u003e\n\u003cli\u003e1 NM-rated light output with 112.5° red, 112.5° green, 135° white stern sector, and 360° white mode\u003c\/li\u003e\n\u003cli\u003e10-32 VDC operating range for 12 V and 24 V systems\u003c\/li\u003e\n\u003cli\u003eApprox. 2.6 W draw (150 mA @ 12 VDC, 81 mA @ 24 VDC)\u003c\/li\u003e\n\u003cli\u003eIP68 water resistance for masthead spray, rain, and washdowns\u003c\/li\u003e\n\u003cli\u003eFlat base mounting with three-hole pattern; supports mounting from the top or from the underside (M4 threaded holes)\u003c\/li\u003e\n\u003cli\u003eIntegrated Windex mount with light to make the wind indicator easier to read at night\u003c\/li\u003e\n\u003cli\u003e0.75 m cable for a short masthead run to your internal wiring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple finish options for a cleaner match to your masthead hardware.\u003c\/p\u003e\u003cp\u003eThe lighting functions, mounting style, dimensions, and electrical range remain consistent across the range; the housing finish is what changes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101-009W-FB (Finish Silver). A natural match for many aluminum spars and anodized mast fittings.\u003c\/li\u003e\n\u003cli\u003e101-009W-FB-B (Finish Black). A common choice when the masthead hardware and instruments are in darker finishes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis style of tri-color plus anchor light is typically used on sailboats that want a single masthead unit for underway and anchoring. Confirm your vessel size and local requirements for a 1 NM masthead light, then check the available space at the masthead for a Ø92.5 mm x 86 mm housing and the cable exit routing.\u003c\/p\u003e\u003cp\u003eThe built-in Windex mount is meant for installations where the wind indicator sits at the masthead. If you already have a Windex bracket or a crowded masthead plate, compare clearances before committing.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe flat base can be installed from the top using three Ø4.4 mm mounting holes, or from the underside using three M4 x 0.7 threaded holes (6 mm deep). On a masthead, take the time to dry-fit the base, confirm cable routing, and bed the fasteners so water cannot track into the spar.\u003c\/p\u003e\u003cp\u003eAs with any tri-color light, orientation matters. Align the housing so the red sector faces port, green faces starboard, and the 135° white stern sector points aft, then verify the light is level on the boat at rest.\u003c\/p\u003e\u003ch6\u003eElectrical and switching\u003c\/h6\u003e\u003cp\u003ePower is simple: 10-32 VDC with low current draw, which keeps voltage drop concerns manageable in a mast run. Plan your switching so you can run the correct mode for the situation underway versus at anchor, and so the Windex light is only on when you actually want it.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing masthead tri-color\/anchor light, label the old conductors before removal so you can keep the correct function-to-switch mapping at the panel.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing uses aluminum with anodized finish options and an acrylic lens, with components selected for constant UV exposure and saltwater air. The unit is sealed to an IP68 rating, which helps when the masthead gets regular spray or routine deck washes.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis configuration suits sailors who want one masthead light for night passages plus an anchor mode, and who still want to read the wind indicator after dark without adding separate mast lighting.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off during routine washdowns, especially around the base and cable exit. During seasonal checks, inspect the cable jacket for chafe where it enters the spar and re-bed the fasteners if you see any sign of water tracking.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Black","offer_id":51550977065206,"sku":"APL682444-V2","price":832.24,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550977097974,"sku":"APL682444-V1","price":832.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1311820_apl682444.webp?v=1787805979"},{"product_id":"apl196449","title":"Lumitec Contour Drop-In LED Navigation Light, USCG 2NM, 10-30V DC, ABYC C-5","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec Contour Drop-In Navigation Light is a flush-mount LED navigation light made to sit in a Contour pocket in a hardtop, arch, or pilothouse. It is offered as dedicated port (red), starboard (green), or stern (white) outputs for building a proper running-light set.\u003c\/p\u003e\u003cp\u003eIt runs on 10-30 VDC for 12V and 24V systems and carries a U.S. Coast Guard 2 nautical mile visibility rating. Typical draw is 18-26 mA at 12 VDC or 12-15 mA at 24 VDC, and the drop-in mount size is 2.5 in W x 1.17 in H x 1.5 in D.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDrop-in style that sits low and keeps fasteners out of sight once installed\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V boats\u003c\/li\u003e\n\u003cli\u003eU.S. Coast Guard 2 nautical mile visibility rating\u003c\/li\u003e\n\u003cli\u003eConforms to ABYC A16\u003c\/li\u003e\n\u003cli\u003eNavigation sectors match standard running-light coverage: 112.5 degrees for sidelights and 135 degrees for the stern light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple configurations based on the required navigation position and color output.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical input remains 10-30 VDC and the lights are rated for 2 nautical miles. The difference between versions is the output position (port, starboard, or stern) and its corresponding color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101846: Color output port (red). Used for the port-side running light sector when underway at night or in reduced visibility.\u003c\/li\u003e\n\u003cli\u003e101836: Color output starboard (green). Used for the starboard-side running light sector and typically paired with the matching port light.\u003c\/li\u003e\n\u003cli\u003e101866: Color output stern (white). Used at the aft-facing stern position to complete the required running-light signature.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe Contour drop-in format relies on a universal pocket profile that is commonly molded into the hardtop during manufacture. Before ordering, confirm the boat has the correct Contour pocket and that the available depth supports a 1.5 in drop-in body.\u003c\/p\u003e\u003cp\u003eRoute wiring to your navigation light switch location with protected runs through the hardtop or structure, and keep all connections sealed for the spray and vibration typical in elevated mounting locations.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eConnect to a 10-30 VDC navigation-light circuit on 12V or 24V systems using appropriately sized marine wiring and circuit protection. The low current draw helps keep the running-light load modest for long night runs.\u003c\/p\u003e\u003ch6\u003ePlacement and compliance\u003c\/h6\u003e\u003cp\u003eMount the port and starboard versions where they have clear visibility forward and to their respective sides, and mount the stern version with clear visibility aft. When installed in the correct position, the series is USCG compliant for vessels from 0 to 50 meters.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style suits boats where you want navigation lights integrated into a hardtop, tower, or pilothouse rather than standing proud on a rail. It is a practical fit for new builds and refits where a custom pocket can be molded or machined into the structure for a clean, snag-resistant installation.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Stern\/White","offer_id":51551095521526,"sku":"APL196449-V3","price":101.09,"currency_code":"USD","in_stock":false},{"title":"Port\/Red","offer_id":51551095554294,"sku":"APL196449-V1","price":95.09,"currency_code":"USD","in_stock":false},{"title":"Starboard\/Green","offer_id":51551095587062,"sku":"APL196449-V2","price":94.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312048_apl196449.jpg?v=1787807541"},{"product_id":"apl302047","title":"C.E. Smith LED Post Guide Light Kit 27656A","description":"\u003cb\u003eLED Post Guide Light Kit\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThese tough, long lasting, waterproof and shockproof LED post guide lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. One piece lamps fit easily on top of your existing 2\" PVC post guide-ons. Amber light faces front, red faces rear. Includes two sealed one piece LED lamps, each with 8' of wire and all necessary electrical connectors and post locking bolts.","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":51551099519222,"sku":"APL302047","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1102449_apl302047jpg.jpg?v=1787807568"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-navigation-lights.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}