{"title":"Rub Rails","description":"","products":[{"product_id":"apl497442","title":"TACO Marine Weather Seal Tape, 10 ft, 3\/8 in H, 5\/8 in W, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0109B10-1 is a black weather seal tape for sealing hatches, live wells, exterior doors, instrument covers, electronic boxes, access compartments, windows, and windshield areas on a boat. It measures 10' long x 5\/8\" wide x 3\/8\" high, giving you a practical strip size for small sealing jobs, replacement work, and noise reduction around lids or panels.\u003c\/p\u003e\u003cp\u003eThis tape uses a flexible sponge rubber construction with a medium closed-cell density and a heavy-duty self-adhesive backing. It helps reduce leaks, rattling, vibration, and shock where panels meet frames, especially in areas exposed to spray, sunlight, temperature swings, and regular washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10' length with a 5\/8\" width and 3\/8\" height for boat hatches, doors, compartments, and covers.\u003c\/li\u003e\n\u003cli\u003eBlack weather seal tape that blends neatly with many deck fittings, hatch frames, and access panels.\u003c\/li\u003e\n\u003cli\u003eFlexible sponge rubber with medium closed-cell density helps block water intrusion and reduce rattling.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty self-adhesive backing supports cleaner installation without separate mechanical fasteners.\u003c\/li\u003e\n\u003cli\u003eHelps absorb shock and vibration where lids, panels, or doors close against a hard surface.\u003c\/li\u003e\n\u003cli\u003eSuitable for live wells, exterior doors, instrument covers, electronic boxes, access compartments, windows, and windshield areas.\u003c\/li\u003e\n\u003cli\u003eResists water absorption, sunlight damage, and temperature extremes common in marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the tape on a clean, dry surface so the adhesive can make full contact with the mounting area. Old adhesive, wax, salt residue, oil, and loose paint should be removed before application. Press the strip firmly along the full length, especially around corners and ends, to help the seal sit evenly against the mating surface.\u003c\/p\u003e\u003cp\u003eFor hatches, access doors, and electronics covers, check the closing pressure after installation. The seal should compress enough to reduce water entry and rattling without forcing the latch or hinge out of alignment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis weather seal is a useful match for boat owners replacing worn gasket material around compartments, small doors, live wells, and protective covers. It also works well for quieting lids and panels that chatter underway, especially on fishing boats, center consoles, runabouts, pontoons, and cruisers that see spray, vibration, and regular deck washing.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550392123638,"sku":"APL497442","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323590_apl497442_jpeg.jpg?v=1787793132"},{"product_id":"apl333497","title":"TACO Marine Weather Seal Tape, 10 ft, 7\/32 in x 3\/8 in, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-1333B10-1 is a black weather seal tape for sealing small marine access points where water, vibration, and sun exposure can shorten the life of lids, covers, and compartments. It measures 10 ft long, 1\/4 in high, and 3\/8 in wide, making it a practical fit for livewells, exterior doors, instrument covers, and electronic boxes.\u003c\/p\u003e\u003cp\u003eThis seal uses a synthetic rubber compound with closed-cell sponge construction, so it helps limit water absorption while cushioning contact surfaces. The black profile keeps the installation low-profile on many deck, cockpit, console, and compartment areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 ft length with a 1\/4 in height and 3\/8 in width for compact sealing jobs around lids, covers, and small access points.\u003c\/li\u003e\n\u003cli\u003eBlack synthetic rubber construction helps resist water absorption, sunlight damage, and temperature extremes in marine environments.\u003c\/li\u003e\n\u003cli\u003eClosed-cell sponge rubber helps cushion contact surfaces while reducing shock and vibration.\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive backing supports a cleaner installation without separate fasteners.\u003c\/li\u003e\n\u003cli\u003eUseful for livewells, exterior doors, instrument covers, and electronic boxes where a tighter seal can help protect the surrounding area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFor the best bond, the mounting surface should be clean, dry, and free of old adhesive, salt, wax, oil, or loose material before the backing is applied. A flat, continuous contact path helps the tape compress evenly when the lid, door, or cover is closed.\u003c\/p\u003e\u003cp\u003eThe 1\/4 in profile should be checked against the available gap before installation. Too little clearance can make a hatch or cover hard to close, while too much clearance may prevent the seal from compressing enough to do its job.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis weather seal is a good match for boat owners replacing worn gasket material on livewell lids, console doors, instrument covers, and small electronics enclosures. It is especially useful in areas exposed to spray, washdowns, UV, and vibration from normal running conditions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the seal periodically for compression set, peeling edges, cracking, or contamination from fuel, cleaners, or deck residue. When the seal no longer rebounds or the adhesive begins to lift, replacement helps restore a cleaner closure and better surface contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51550891147510,"sku":"APL333497","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323587_apl333497_jpeg.jpg?v=1787803738"},{"product_id":"apl919299","title":"TACO Marine SuproFlex Medium Rub Rail Kit, 2 in x 29\/32 in, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Medium Rub Rail Kit is a semi-rigid vinyl rub rail kit for medium boats that need hull-side protection with a clean finished edge. It measures 2 inches high by 29\/32 inch wide and is offered in 60-foot and 80-foot kit lengths, giving boat owners and installers options for matching the run around the hull.\u003c\/p\u003e\u003cp\u003eSuproFlex uses co-extruded vinyl with two hardness levels, pairing a rigid backing with a softer front face that helps absorb everyday contact from docks, pilings, and rafting alongside other boats. The profile comes in a continuous coil, so it can follow most hull shapes without pre-forming and with only minimal heat needed for bends.\u003c\/p\u003e\u003cp\u003eThis medium kit is a practical match for center consoles, bay boats, and similar boats in the 22 to 30-foot range where a full rub rail replacement or clean refit is needed. It is also predrilled for fasteners, with #10 screws spaced 4 inches on center, which helps keep installation layout consistent along the hull.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch by 29\/32-inch SuproFlex medium rub rail profile for rub rail replacement and refit work on many mid-size boats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl construction combines a rigid backing with a softer front face for impact absorption along the hull edge.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage dock contact, trailer handling, and light side impacts during normal boat use.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format reduces joints and helps the rail follow curved hull sections with less installation work.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming required, with minimal heat needed for bends during fitting.\u003c\/li\u003e\n\u003cli\u003ePredrilled for #10 fasteners at 4-inch centers for cleaner spacing during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with the included V12-0307 insert, with insert color matched to the selected variant.\u003c\/li\u003e\n\u003cli\u003eIncludes stainless-steel end caps and screws for a complete rub rail kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Medium Rub Rail Kit is offered in multiple configurations so the rail length and visible color can be matched to the boat and the refit plan.\u003c\/p\u003e\u003cp\u003eThe profile size, SuproFlex construction, predrilled fastener layout, included insert family, stainless-steel end caps, screws, USA manufacture, and 5-year limited warranty are consistent across these variants. The differences are the kit length, rub rail color, and insert color used with the selected finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9990BBK60-2: Black, 60-inch length option. This version uses a black rub rail with a Flex Chrome insert, giving the hull edge a darker base with a bright accent line.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM60-2: White, 60-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert, a common look for boats with white gelcoat and bright trim.\u003c\/li\u003e\n\u003cli\u003eV11-9990BBK80-2: Black, 80-inch length option. This version keeps the black rub rail and Flex Chrome insert combination while allowing more length for a larger perimeter run.\u003c\/li\u003e\n\u003cli\u003eV11-9990GRD80-2: Grey, 80-inch length option. This version uses a gray rub rail with a gray insert for a more uniform finish along the hull side.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM80-2: White, 80-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert and provides the longer kit length for boats that need the additional run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFor a clean installation, the old rail and fasteners should be removed, the mounting surface cleaned, and the new SuproFlex coil worked around the hull before final fastening. Because the rail is flexible and does not need pre-forming, it is easier to manage around common bow and transom curves than many traditional vinyl rub rails.\u003c\/p\u003e\u003cp\u003eThe predrilled layout helps maintain even fastener spacing, but the installer should still confirm alignment, end cap placement, and insert seating before the final pass. As with any rub rail replacement, the selected kit length should be checked against the boat’s actual perimeter, including any allowance needed for trimming and end finishing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit suits owners restoring worn rub rail, repairing impact-damaged trim, or refreshing the look of a center console, bay boat, or similar hull. It is especially useful where the boat sees regular dockside contact, raft-ups, trailer loading, or tight marina handling.\u003c\/p\u003e\u003cp\u003eThe finish options make it easier to keep the replacement close to the boat’s existing style. Black and Frosty White versions include a Flex Chrome insert for a brighter trim line, while the gray version keeps the insert color matched to the rail for a subtler look.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex medium rub rail coil in the selected color and length\u003c\/li\u003e\n\u003cli\u003eV12-0307 insert in the color supplied with the selected variant\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Grey \/ 80-Inch","offer_id":51551049974006,"sku":"APL919299-V5","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 80-Inch","offer_id":51551050006774,"sku":"APL919299-V9","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 60-Inch","offer_id":51551050039542,"sku":"APL919299-V7","price":769.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 80-Inch","offer_id":51551050072310,"sku":"APL919299-V6","price":964.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 60-Inch","offer_id":51551050105078,"sku":"APL919299-V1","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371213_apl919299_jpeg.jpg?v=1787807224"},{"product_id":"apl287383","title":"TACO Marine SuproFlex Small Rub Rail End Cap, For V11-9960, Type-316L SS, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0274 is a small stainless steel end cap for finishing a SuproFlex V11-9960 rub rail at the stern of a boat. It closes off the end of the rail run and helps keep the insert seated, giving the installation a clean termination point instead of leaving the rub rail open at the transom.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror polish finish, so it matches the look of polished stainless rub rail hardware used on exposed deck and hull areas. It is made for #8 screw fastening and is a fit-specific accessory for the SuproFlex V11-9960 profile.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO Marine SuproFlex V11-9960 rub rail installations.\u003c\/li\u003e\n\u003cli\u003eCaps the stern end of the rub rail for a finished appearance.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert intact at the end of the run.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction suits exposed marine hardware locations.\u003c\/li\u003e\n\u003cli\u003eMirror polish finish coordinates with stainless rub rail trim.\u003c\/li\u003e\n\u003cli\u003eMade for #8 screw fastening.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part should be matched to the SuproFlex V11-9960 rub rail profile before ordering. It is not a universal end cap, so the rail profile matters more than the boat brand or model year.\u003c\/p\u003e\u003cp\u003eIt is commonly used where the rub rail terminates at the stern, including transom corners and aft rail ends where an open insert could shift or look unfinished. For a clean installation, dry-fit the cap against the rail end before fastening and make sure the insert is fully seated.\u003c\/p\u003e\u003ch6\u003eInstallation notes\u003c\/h6\u003e\u003cp\u003eInstall the cap after the rub rail and insert are positioned correctly. Use the correct #8 fastener for the mounting surface and avoid overtightening, since the cap needs to sit cleanly against the rail without distorting the surrounding trim.\u003c\/p\u003e\u003cp\u003eOn boats that see regular washdowns or salt exposure, rinse the stainless surface with fresh water as part of normal deck hardware care. The mirror polish finish can be maintained with the same non-abrasive cleaning approach used for other polished stainless fittings on board.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551126880502,"sku":"APL287383","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370525_apl287383_jpeg.jpg?v=1787808270"},{"product_id":"apl574544","title":"TACO Marine Rigid Vinyl Flex-Core Rub Rail, Frosty White, 29\/32 in W x 2 in H x 60 ft L","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V21-9906WHC60D-1 is a Frosty White rigid vinyl Flex-Core rub rail for replacing or upgrading the protective rail around a boat’s gunwale. It uses a 2-inch high profile with an approximate 7\/8-inch width, supplied in a 60-foot continuous coil so the rail can wrap the hull with fewer visible interruptions.\u003c\/p\u003e\u003cp\u003eThis rub rail pairs a rigid PVC outer cap with a lighter high-density inner core, giving it the traditional look of a rigid vinyl rail while making handling and bending more manageable during installation. The continuous coil format helps reduce butt joints around the boat, which is useful on runabouts, fishing boats, flats boats, bay boats, and other medium-size hulls where a clean sheer line matters.\u003c\/p\u003e\u003cp\u003eThe rail is drilled and countersunk for #8 screws on 8-inch centers, and it requires the S11-4511 insert to complete the installation. The Frosty White finish is a practical match for many white hulls and deck lines, especially when the goal is a clean replacement rather than a contrasting rub rail.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRigid vinyl Flex-Core rub rail with a 2-inch by approximately 7\/8-inch profile for gunwale protection and trim replacement.\u003c\/li\u003e\n\u003cli\u003e60-foot continuous coil reduces the need for butt joints around the hull and helps create a cleaner finished line.\u003c\/li\u003e\n\u003cli\u003eSolid rigid PVC cap stock gives the rail its traditional surface appearance and impact behavior.\u003c\/li\u003e\n\u003cli\u003eHigh-density inner core helps absorb everyday dockside bumps and makes the rail easier to handle during installation.\u003c\/li\u003e\n\u003cli\u003eDrilled and countersunk for #8 screws on 8-inch centers, which supports a consistent fastening pattern.\u003c\/li\u003e\n\u003cli\u003eRequires S11-4511 insert, sold separately, for the finished rub rail assembly.\u003c\/li\u003e\n\u003cli\u003eFrosty White color works well for many white hulls, decks, and factory-style rub rail replacements.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, measure the existing rail profile and compare both the height and width against the boat’s current rub rail channel or mounting surface. This rail is commonly used on medium-size boats, but the final fit depends on the hull shape, the mounting flange, and how the existing rail was fastened.\u003c\/p\u003e\u003cp\u003eThe pre-drilled and countersunk screw pattern keeps installation more predictable, especially when replacing a rail along a long gunwale. Because the insert is required and sold separately, it should be planned as part of the same job along with the correct #8 fasteners for the hull material and mounting location.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a strong match for boat owners and repair shops replacing a worn, stained, cracked, or damaged gunwale rail after years of dock contact, trailer loading, fishing use, and washdowns. The Frosty White finish keeps the look close to many factory installations and helps the rail blend into the hull rather than becoming a visual accent.\u003c\/p\u003e\u003cp\u003eFor refits, the continuous coil is helpful when the goal is a smooth perimeter with fewer joints. Careful dry fitting around tight curves, corners, and transom areas will help confirm how the rail bends before final fastening.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rail with fresh water after saltwater use and clean it with mild boat soap during regular washdowns. Avoid harsh solvents or abrasive pads that can mark the vinyl surface, especially on the Frosty White finish.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51551158010102,"sku":"APL574544","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370594_apl574544_jpeg.jpg?v=1787809369"},{"product_id":"apl555288","title":"TACO Marine Rub Rail End Cap, For V11-2423 \u0026 V11-3426, 2 in, White Nylon","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F90-0001WN is a 2-inch white nylon rub rail end cap made to finish the stern end of compatible TACO rub rail installations. It gives the rail a clean stopping point and helps keep the rub rail insert in place once the rail is trimmed and secured.\u003c\/p\u003e\u003cp\u003eThis end cap fits TACO rub rail profiles V11-2423 and V11-3426, so it is best matched by checking the existing rail profile before ordering. The white finish works well on many fiberglass hulls and transoms where a low-profile trim piece is needed to complete a repair, refit, or new rub rail installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch rub rail end cap for finishing the stern end of a rub rail run.\u003c\/li\u003e\n\u003cli\u003eWhite nylon construction for use as exterior boat trim hardware.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO rub rail profiles V11-2423 and V11-3426.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert seated at the end of the installation.\u003c\/li\u003e\n\u003cli\u003eSold individually, making it suitable for single-side replacement or matched pair ordering as needed.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eUse this end cap after the rub rail and insert have been cut to length and aligned at the stern. Fit should be confirmed against the rail profile, especially on older boats where rub rail styles may have changed during previous repairs.\u003c\/p\u003e\u003cp\u003eFor the cleanest result, dry-fit the cap before final fastening and make sure the insert sits fully inside the rail. This helps avoid a loose end that can catch during docking, trailering, washdowns, or routine handling around the transom.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part is a practical match for boat owners replacing a damaged rub rail end cap, completing a rub rail installation, or tidying up stern trim after a repair. It is especially useful where the exposed end of the rail needs a finished look and the insert needs a defined stopping point.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the area during normal boat washdowns and check the cap during seasonal inspections. If the rub rail insert begins to creep or the cap is damaged by dock contact, replacing the end cap is a simple way to restore the finished edge of the rail.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne white 2-inch rub rail end cap.\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553127923958,"sku":"APL555288","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324027_apl555288.webp?v=1787817837"},{"product_id":"apl846351","title":"TACO Marine 90° Top Cap, For 7\/8 in Tube, Set Screw, Polished SS316L","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F11-0180S-1 is a 90 degree top cap for 7\/8 inch outside diameter tubing, used as a side-mount ball and socket fitting on boat canvas and shade hardware. It finishes the end of the tube at a right-angle connection point and uses a set screw fastener, which is useful when the fitting needs to be positioned, serviced, or adjusted without a pop-rivet installation.\u003c\/p\u003e\u003cp\u003eThis fitting belongs to TACO Marine’s ball and socket top fitting range and is made from polished Type 316L stainless steel with a Delrin insert. The pivot design allows full rotation, helps reduce rattling at the connection, and gives the frame a cleaner range of movement when used with compatible bimini, shade, or canvas support hardware.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 7\/8 inch outside diameter tubing for common marine canvas and shade frame applications.\u003c\/li\u003e\n\u003cli\u003e90 degree side-mount top cap configuration for right-angle tube terminations.\u003c\/li\u003e\n\u003cli\u003eSet screw fastening allows installation without a pop-rivet on this configuration.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316L stainless steel construction for exposed marine hardware locations.\u003c\/li\u003e\n\u003cli\u003eDelrin insert helps the ball and socket connection move smoothly and reduces fitting rattle.\u003c\/li\u003e\n\u003cli\u003ePatented ball and socket pivot design supports full rotation at the connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eUse this top cap where a 7\/8 inch tube needs a 90 degree end fitting for a canvas or shade frame. Before installation, confirm the tube outside diameter and check the mating ball and socket hardware in the existing frame so the fitting matches the rest of the system.\u003c\/p\u003e\u003cp\u003eThe set screw should be seated against clean tubing and tightened evenly. On boats exposed to vibration, trailering, or repeated folding of a bimini frame, the connection should be checked as part of normal hardware inspection.\u003c\/p\u003e\u003ch6\u003eMarine use\u003c\/h6\u003e\u003cp\u003eThe polished stainless finish makes this fitting suitable for visible topside locations where hardware appearance matters, such as bimini frames, shade supports, and canvas structures around cockpits or helm areas. It is a practical match for owners replacing a worn fitting or fabricators building a frame that needs a controlled 90 degree tube connection with a smooth pivot point.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553451868406,"sku":"APL846351","price":41.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370500_apl846351_jpeg.jpg?v=1787820929"},{"product_id":"apl167957","title":"TACO Marine Stainless Steel Hollow Back Rub Rail, 3\/4 in x 6 ft, 304 SS, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine S11-4511P6-1 is a 3\/4 inch wide hollow back stainless steel rub rail insert supplied in a 6 foot polished section for finishing and protecting a boat’s rub rail edge. It is made from Type 304 stainless steel and works well where the hull-to-deck joint, sheer line, or existing rub rail needs a clean metal insert that can handle normal dock contact and regular washdowns.\u003c\/p\u003e\u003cp\u003eThis insert is drilled and countersunk for #8 screws on 6 inch centers, which helps keep installation spacing consistent along straight runs and gentle curves. The hollow back profile is meant to sit over the matching rub rail base or mounting surface, giving the finished edge a bright stainless look while adding impact resistance at common contact points around slips, pilings, fenders, and trailers.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3\/4 inch wide polished stainless steel hollow back rub rail insert for a finished metal edge on compatible boat rub rail systems.\u003c\/li\u003e\n\u003cli\u003eSupplied as a 6 foot section, making it practical for replacements, repairs, and shorter custom runs.\u003c\/li\u003e\n\u003cli\u003eType 304 stainless steel construction gives the insert the corrosion resistance expected for above-water marine trim and rub rail use.\u003c\/li\u003e\n\u003cli\u003eDrilled and countersunk for #8 screws on 6 inch centers to support a clean, even fastener layout.\u003c\/li\u003e\n\u003cli\u003ePolished finish helps match other stainless deck hardware, rails, and trim on many powerboats and center consoles.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, compare the 3\/4 inch width and hollow back shape with the rub rail profile already on the boat. Stainless inserts need the correct backing profile and screw pattern to sit flat, so checking the existing rail, end caps, and corner transitions is important before cutting or drilling.\u003c\/p\u003e\u003cp\u003eFor installation, use the pre-drilled countersunk holes as the fastening guide and pair the insert with suitable #8 marine fasteners for the hull material and backing structure. On saltwater boats, bedding or sealing fastener holes is a sensible step to reduce water intrusion at the hull-to-deck joint.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail insert is a good match for boat owners and yards replacing worn stainless trim, repairing a damaged rail section, or refreshing the appearance of a rub rail without changing the full profile. It suits exposed exterior locations where a polished stainless edge is preferred over vinyl alone, especially around docking contact areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the insert with fresh water after saltwater use and clean it with products that are safe for polished stainless steel. Avoid abrasive pads that can scratch the finish, and inspect the fasteners periodically so the insert stays tight along the rub rail line.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51553468186870,"sku":"APL167957","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370597_apl167957_jpeg.jpg?v=1787821391"},{"product_id":"apl483286","title":"TACO Marine Flexible Vinyl Rub Rail Kit, 1-1\/16 in x 11\/16 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V11-0809 is a flexible vinyl rub rail kit for smaller boats that need a clean replacement rail around the hull and deck joint. The profile measures 1-1\/16\" x 11\/16\", with kit lengths available in 50' and 70' configurations depending on the boat and the amount of coverage needed.\u003c\/p\u003e\u003cp\u003eThis kit uses a black vinyl rub rail with a separate insert, giving the rail a finished look while helping protect the boat from the bumps and scuffs that happen around docks, trailers, pilings, and other boats. The flexible vinyl profile can follow curved hull shapes, and tight radius bends require only minimal heat during installation.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for small boats in the 10' to 16' range, including fishing boats, bass boats, dinghies, and smaller sailboats where a compact rub rail profile makes more sense than a large commercial-style rail.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-1\/16\" x 11\/16\" flexible vinyl rub rail profile for smaller boat hull and deck joints.\u003c\/li\u003e\n\u003cli\u003eAvailable in 50' and 70' kit lengths to match different hull sizes and replacement needs.\u003c\/li\u003e\n\u003cli\u003eSoft durometer vinyl helps cushion minor contact at docks, trailers, and alongside other boats.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format supports one-piece installation without rail seams around the boat.\u003c\/li\u003e\n\u003cli\u003eBlack rub rail body with black or Arctic White insert options for matching the boat’s existing trim style.\u003c\/li\u003e\n\u003cli\u003eTight radius bends require minimal heat, which helps during installation around bows and curved corners.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail kit is offered in multiple configurations that change the kit length and insert color while keeping the same V11-0809 profile size.\u003c\/p\u003e\u003cp\u003eThe rail body is black across the listed configurations. The main differences are the total length supplied in the kit and whether the insert is black or Arctic White.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-0809BBK50-2: 50' length with black insert. This configuration keeps the rail and insert in the same black finish for a uniform trim line around the boat.\u003c\/li\u003e\n\u003cli\u003eV11-0809BBK70-2: 70' length with black insert. The longer coil suits boats that need more continuous coverage while keeping the same all-black appearance.\u003c\/li\u003e\n\u003cli\u003eV11-0809BWK50-2: 50' length with Arctic White insert. The white insert adds contrast against the black rail and can tie in with lighter hulls, decks, or existing white trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, measure the existing rub rail path around the boat and compare the current profile to the 1-1\/16\" x 11\/16\" shape. Extra care is useful at the bow and stern corners, where the rail must follow tighter curves and where heat may be needed to help the vinyl take the bend.\u003c\/p\u003e\u003cp\u003eThe continuous coil helps reduce visible joints along the rail, which is useful when refreshing an older boat or replacing a damaged rail after years of docking and trailering wear. Fastener placement should follow the boat’s existing structure and the installation guide included with the kit.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit makes sense for owners replacing worn, cracked, missing, or faded rub rail on a small powerboat, dinghy, fishing boat, or sailboat. It is also useful during restoration work when the boat needs a cleaner edge around the hull and deck joint without moving to a larger rail profile.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, rinse the rail with fresh water during normal washdowns, especially after saltwater use. Mild boat soap is usually enough for routine cleaning, and checking the insert and fasteners during seasonal maintenance helps keep the rail seated correctly.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible vinyl rub rail\u003c\/li\u003e\n\u003cli\u003eInsert\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Black \/ 70'","offer_id":51553531789558,"sku":"APL483286-V54","price":437.99,"currency_code":"USD","in_stock":true},{"title":"Arctic White \/ 50'","offer_id":51553531822326,"sku":"APL483286-V82","price":374.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 50'","offer_id":51553531855094,"sku":"APL483286-V5","price":344.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327931_apl483286.webp?v=1787822081"},{"product_id":"apl042688","title":"TACO Marine Stainless Steel Pin with Lanyard, Plastic Knob, Type 316L SS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F13-0244BN-1 is a stainless steel pin with lanyard and plastic knob for TACO ball and socket style deck hinges. It is used as replacement or service hardware on boat shade and canvas systems where the hinge needs a secure removable pin that can be handled quickly at the dock, underway, or during seasonal canvas removal.\u003c\/p\u003e\u003cp\u003eThe pin uses Type 316L stainless steel, a good match for saltwater exposure, washdowns, and the vibration that canvas and top hardware see on deck. The attached lanyard helps keep the pin with the fitting when the top is folded, adjusted, or removed, while the plastic knob gives your hand a better grip than a bare pin.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO ball and socket style deck hinges used with canvas, shade, and top hardware.\u003c\/li\u003e\n\u003cli\u003eType 316L stainless steel construction supports use in wet, salt-exposed marine locations.\u003c\/li\u003e\n\u003cli\u003eAttached lanyard helps prevent the pin from being dropped or misplaced during adjustment.\u003c\/li\u003e\n\u003cli\u003ePlastic knob gives a hand-friendly pull point for quick removal and reinstallation.\u003c\/li\u003e\n\u003cli\u003eUseful as service hardware for bimini tops, canopies, and similar boat shade assemblies.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis part is intended for compatible TACO ball and socket deck hinge assemblies. Before ordering, match the hinge style on the boat to the existing TACO ball and socket hardware and check that the current pin style uses the same knob and lanyard arrangement.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward once the correct hinge is confirmed. Insert the pin through the hinge connection, make sure the hardware seats fully, and keep the lanyard secured so the pin stays with the fitting when the canvas frame is opened, folded, or removed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis pin is a practical replacement item for boats with bimini tops, cockpit shade, canvas canopies, and other removable top structures. It is especially useful where the top is adjusted often, since the knob and lanyard make day-to-day handling easier and reduce the chance of losing small hardware overboard.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the pin and nearby hinge hardware with fresh water after saltwater use, especially around the lanyard connection and moving contact points. During routine canvas checks, inspect the pin for bending, the knob for secure attachment, and the lanyard for wear so the hinge connection stays dependable over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51554023932150,"sku":"APL042688","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370506_apl042688_jpeg.jpg?v=1787826880"},{"product_id":"apl075814","title":"TACO Marine Rub Rail End Cap, For V21-9502, 2-19\/64 in Width, SS316, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0091 is a polished stainless steel rub rail end cap for finishing the open end of a compatible TACO rub rail installation. It caps the rail at the end of the run, helps keep the insert seated, and gives the stern or rail termination point a clean metal finish instead of leaving the profile exposed.\u003c\/p\u003e\u003cp\u003eThis end cap measures 2-7\/8 inches long, 1-5\/32 inches high, and 2-19\/64 inches wide. It uses a #8 screw and is made from polished 316 stainless steel, a sensible choice for rub rail areas that see spray, washdowns, dock contact, and regular UV exposure.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePolished stainless steel finish matches bright exterior trim and rub rail hardware.\u003c\/li\u003e\n\u003cli\u003e316 stainless steel construction helps resist corrosion in saltwater and freshwater use.\u003c\/li\u003e\n\u003cli\u003eCaps the end of the rub rail so the insert stays captured instead of working loose at the termination point.\u003c\/li\u003e\n\u003cli\u003e2-19\/64 inch width supports fit checks against the rub rail profile before installation.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO V21-9502 rub rail profile.\u003c\/li\u003e\n\u003cli\u003eSold individually, which is useful when replacing one damaged end cap or completing one end of a rail run.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFit should be checked against the existing rub rail profile before drilling or fastening, especially on older boats where rub rail styles may have been replaced during previous repairs. The listed fit is for TACO V21-9502, and the end cap is intended to sit over the rail termination and fasten with a #8 screw.\u003c\/p\u003e\u003cp\u003eFor best results, align the insert and rail before fastening the cap so the insert is fully seated and not under tension. On boats used in saltwater, bedding the fastener area and rinsing the polished stainless after heavy spray can help keep the finish looking cleaner over time.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part is a good match for owners, yards, and riggers finishing a rub rail repair, replacing a missing stern end cap, or cleaning up the end of a rail run after hull work. It is a small component, but it matters because an exposed rail end can look unfinished and may allow the insert to creep out during normal docking, trailering, or washdown use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51554045395190,"sku":"APL075814","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370509_apl075814_jpeg.jpg?v=1787827385"},{"product_id":"apl322189","title":"TACO Marine Flex-Core Rigid Vinyl Rub Rail, 1.58 in x .635 in, 60 ft, Frosty White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V21-9959WHC60D-1 is a Rigid Vinyl Flex-Core Rub Rail for replacing or upgrading the protective rail around a boat’s gunwale. It measures 1.58\" x .635\", comes in a 60' length, and has a Frosty White finish that suits many fiberglass hull and deck profiles.\u003c\/p\u003e\u003cp\u003eThis rub rail uses a solid rigid PVC cap stock over a lightweight high-density inner core, giving it the look and impact behavior of a rigid vinyl rail while making it easier to handle during installation. The continuous coil format helps reduce butt joints around the gunwale, which is useful when a cleaner run and smoother bends are important.\u003c\/p\u003e\u003cp\u003eIt is a practical fit for boat owners, yards, and refit shops working on rub rail replacement for boats up to 40 feet. The matching S11-4511 insert is required and sold separately, so it should be planned into the installation before starting the job.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1.58\" x .635\" rigid vinyl rub rail profile in Frosty White for a clean exterior finish around the gunwale\u003c\/li\u003e\n\u003cli\u003e60' continuous coil helps reduce butt joints and supports a smoother one-piece installation\u003c\/li\u003e\n\u003cli\u003eSolid rigid PVC cap stock with a lightweight high-density inner core for easier handling and shock-absorbent impact resistance\u003c\/li\u003e\n\u003cli\u003eCold-forming capability helps the rail follow common hull and deck contours during installation\u003c\/li\u003e\n\u003cli\u003eVacuum-calibrated profile supports tighter dimensional tolerance and more consistent sizing\u003c\/li\u003e\n\u003cli\u003ePre-drilled and countersunk for #8 screws on 8\" centers to simplify fastening layout\u003c\/li\u003e\n\u003cli\u003eRequires S11-4511 insert, sold separately, for the finished rub rail assembly\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rub rail is built for installations where a long, continuous run matters, such as gunwale protection on center consoles, runabouts, fishing boats, and other fiberglass boats within the stated size range. The 60' length should be checked against the full perimeter of the boat, including transom corners and any overlap or trimming needed during fitting.\u003c\/p\u003e\u003cp\u003eThe rail is drilled and countersunk for #8 screws on 8\" centers, which helps keep fastener spacing consistent along the hull. Heat may be needed when forming tighter radiuses, especially around corners or sections with more pronounced curvature.\u003c\/p\u003e\u003ch6\u003eCompatibility and finishing details\u003c\/h6\u003e\u003cp\u003eThe S11-4511 insert is required to complete the assembly and is not included with this rub rail. Confirm the insert, end treatments, fasteners, and any bedding or sealant requirements before installation, especially when replacing an older rail where existing hole spacing or hull shape may not match exactly.\u003c\/p\u003e\u003cp\u003eThe Frosty White finish gives the rail a traditional look for light-colored hulls and decks. It works well for refits where the goal is to restore protection at the hull-to-deck joint while keeping the boat’s exterior profile neat and consistent.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51554100707574,"sku":"APL322189","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370596_apl322189_jpeg.jpg?v=1787828229"},{"product_id":"apl032739","title":"C.E.Smith Flex Keel Pad - Full Cap Style - 12\" x 3\" - Blue 16873","description":"\u003cp\u003e\u003cstrong\u003eFlex Keel Pad - Full Cap Style - 12\" x 3\" - Blue\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese Thermal Plastic Rubber (TPR) pads cushion the trailer cross members to protect your boat keel. Full cap style mounts on the center of any 3\" wide cross member or axle that the keel might hit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlue TPR\u003c\/li\u003e\n\u003cli\u003e3\" W x 12\" L\u003c\/li\u003e\n\u003cli\u003e5\/16\" thick\u003c\/li\u003e\n\u003cli\u003e3\/4\" deep sides for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount using four rivets or screws, two through each side (hardware not included).\u003c\/p\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":51554568732918,"sku":"APL032739","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1092563_apl032739jpg.jpg?v=1787841265"},{"product_id":"apl344752","title":"TACO Marine Side Mount Table Pedestal, Type 304 Stainless Steel, 17-3\/4 in H, 12 in W, 1-5\/8 in Tube, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0005A is a removable side mount table support arm for boats where a fixed table pedestal would take up too much walkway, cockpit, cabin, or deck space. It uses a 125 degree bent leg, measures 17-3\/4\" high by 12\" wide, and accepts a 1-5\/8\" tube size, giving boat owners a clear way to check fit before replacing or building out a side mount table setup.\u003c\/p\u003e\u003cp\u003eThe polished Type 304 stainless steel construction suits marine interiors and protected exterior seating areas, while the white Delrin insert helps the table support interface feel finished and reduces metal-on-metal contact at the tube connection. The removable format is useful when the table is only needed for meals, entertaining, rigging prep, or dockside use, then needs to come out of the way for movement around the boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRemovable side mount table support arm for boat table pedestal systems.\u003c\/li\u003e\n\u003cli\u003e125 degree bent leg helps support a side mounted table while keeping floor space more open.\u003c\/li\u003e\n\u003cli\u003eType 304 stainless steel with a polished finish for a clean match with marine hardware and seating areas.\u003c\/li\u003e\n\u003cli\u003eWhite Delrin insert at the tube connection for a finished interface point.\u003c\/li\u003e\n\u003cli\u003e17-3\/4\" height, 12\" width, and 1-5\/8\" tube size for fit checks during replacement or installation planning.\u003c\/li\u003e\n\u003cli\u003eUseful for cockpits, cabins, pontoons, and seating areas where a removable table makes the space easier to move through.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis support arm is meant for a side mount table pedestal arrangement, so fit should be checked against the matching table base, side mounting bracket, tube diameter, and the available swing and clearance around the seating area. The 12\" width and 125 degree leg shape matter when planning how far the table projects from the mounting point and how much passage space remains when the table is installed.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm that the mounting surface is strong enough for table loads and normal movement on board. On fiberglass or cored panels, proper backing, sealant, and corrosion-aware fastener selection help keep the installation secure in a wet marine environment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis table support is a practical match for boats that need a removable table in a compact layout, including pontoon seating zones, cockpit lounges, cabin dinettes, and deck areas used for meals or casual entertaining. It is especially useful where a permanent pedestal would interfere with foot traffic, storage access, or boarding movement.\u003c\/p\u003e\u003cp\u003eFor owners refreshing older table hardware, the confirmed 1-5\/8\" tube size and 17-3\/4\" height are the key dimensions to compare with the existing pedestal parts before ordering.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51554715173110,"sku":"APL344752","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370350_apl344752_jpeg.jpg?v=1787841982"},{"product_id":"apl922224","title":"TACO Marine Rigid Vinyl Flex-Core Rub Rail, 2 in x 7\/8 in, Black, 60 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V21-9906BKA60D-1 is a black Rigid Vinyl Flex-Core rub rail for replacing or upgrading the protective rail around a boat’s gunwale. It is supplied in a 60 ft continuous coil with a 2 in. height profile, helping reduce visible joints around the hull while giving the boat a clean finished edge.\u003c\/p\u003e\u003cp\u003eThis rub rail uses a solid rigid PVC cap stock over a lightweight high-density inner core. That construction helps with handling during installation, supports cold forming around typical hull contours, and adds shock-absorbent impact resistance where the rail takes contact from docks, pilings, trailers, and routine marina use.\u003c\/p\u003e\u003cp\u003eThe rail is drilled and countersunk for #8 screws on 8 in. centers. It requires the S11-4511 insert to complete the installation, so that insert should be accounted for when planning a replacement job or matching an existing TACO rub rail setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 ft continuous black coil helps avoid butt joints around the gunwale for a cleaner finished installation.\u003c\/li\u003e\n\u003cli\u003eRigid PVC cap stock gives the rail its exterior surface and impact properties for day-to-day contact points on the hull.\u003c\/li\u003e\n\u003cli\u003eLightweight high-density core makes the long section easier to handle while adding shock-absorbent impact resistance.\u003c\/li\u003e\n\u003cli\u003eCold-forming capability helps the rail follow common boat contours during fitting.\u003c\/li\u003e\n\u003cli\u003eVacuum-calibrated profile supports tighter dimensional consistency for a more uniform fit along the hull side.\u003c\/li\u003e\n\u003cli\u003ePre-drilled and countersunk for #8 screws on 8 in. centers to simplify fastening layout.\u003c\/li\u003e\n\u003cli\u003eRequires TACO S11-4511 insert for the finished rub rail assembly.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rub rail is suited for boat owners, yards, and riggers replacing a worn rail or refreshing the hull edge during refit work. The continuous coil format is helpful on longer gunwale runs because it reduces the number of breaks that need to be aligned and finished.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the existing rail height, insert style, screw pattern, and hull curvature with the replacement profile. The pre-drilled 8 in. screw spacing helps keep the fastening pattern consistent, but the underlying hull flange or backing should be checked so the screws have solid material to bite into.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eA rub rail is one of the first parts of the boat to take everyday abuse from dock lines, fenders, pilings, raft-ups, and trailer handling. This profile is a practical match for powerboats that need a black rigid vinyl rail with a cleaner one-piece look and enough flexibility to follow normal hull shapes during installation.\u003c\/p\u003e\u003cp\u003eFor the best finished result, pair the rail with the required S11-4511 insert and confirm end caps or related finishing hardware separately if the job calls for them.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51554880028918,"sku":"APL922224","price":394.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370595_apl922224_jpeg.jpg?v=1787845659"},{"product_id":"apl640860","title":"TACO Marine Semi-Rigid Vinyl Rub Rail Kit, Continuous Coil","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Semi-Rigid Rub Rail Kit is a vinyl rub rail replacement range for boats that need hull-edge protection and a cleaner finished profile at the deck joint. These kits cover common refit needs on center consoles, skiffs, hybrids, and other small to mid-size boats, with profiles available in 30 ft, 50 ft, and 70 ft lengths.\u003c\/p\u003e\u003cp\u003eEach configuration uses a semi-rigid vinyl rub rail that can be formed around the hull in one continuous coil, helping reduce visible joints along the sheer line. Depending on the selected variant, the profile measures 1-7\/8 in. H x 3\/4 in. W, 1-1\/2 in. H x 3\/4 in. W, or 1-5\/8 in. H x 3\/4 in. W, so checking the existing rub rail height, width, and hull shape is important before ordering.\u003c\/p\u003e\u003cp\u003eThe semi-rigid construction gives the rail enough cushion for normal contact with docks and pilings while still handling tight radius bends with minimal heat. It is a practical choice for a boat owner replacing tired rail, covering an edge after hull work, or refreshing the boat’s side profile without switching to a metal rub rail system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSemi-rigid vinyl construction gives cushioning at the hull edge during normal contact with docks, pilings, and trailer guides.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format supports one-piece installation with fewer visible seams along the boat’s sheer line.\u003c\/li\u003e\n\u003cli\u003eAvailable in black and white profiles, with insert options that change the finished look of the rail.\u003c\/li\u003e\n\u003cli\u003eTight radius bends can be made with minimal heat, which helps during installation around curved bows and transom corners.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003cli\u003eProfile sizes and lengths vary by configuration, making it important to match the rail to the boat’s existing footprint before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail kit is offered in three configurations with different lengths, profile sizes, and color combinations. The variants are not just cosmetic, so the selected part should match both the boat’s required coverage length and the existing rub rail footprint.\u003c\/p\u003e\u003cp\u003eThe 30 ft black configuration is a no-insert style, while the 50 ft black configuration includes a black insert and the 70 ft white configuration uses a flexible chrome insert. The rub rail kit format, continuous coil approach, end caps, screws, and installation guide are consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-4135BKA30-3: 30 ft length, black color, no insert, 1-7\/8 in. H x 3\/4 in. W. This configuration suits shorter replacement runs where a black rub rail profile without a separate insert is needed.\u003c\/li\u003e\n\u003cli\u003eV11-9795BBK50D-2: 50 ft length, black rub rail with black insert, 1-1\/2 in. H x 3\/4 in. W. The black insert keeps the side profile visually uniform while still using an insert-style rail.\u003c\/li\u003e\n\u003cli\u003eV11-9811WCM70-2: 70 ft length, white rub rail with flexible chrome insert, 1-5\/8 in. H x 3\/4 in. W. The chrome insert gives the white rail a stainless-look accent while keeping the flexibility of a vinyl insert system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, compare the new profile against the boat’s existing rub rail height, width, and mounting surface. A close footprint match helps cover old fastener locations and keeps the rail sitting correctly against the hull and deck joint.\u003c\/p\u003e\u003cp\u003eThe coil format is useful for refits because it lets the installer work around long sections of the boat without creating unnecessary breaks. On sharper bends, controlled heat may be used to help the rail follow the curve without forcing the material.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for boat owners replacing cracked, faded, or damaged rub rail after years of docking, rafting up, or trailer use. It also fits refit work where the boat needs a cleaner edge treatment after paint, gelcoat repair, or hardware changes along the hull side.\u003c\/p\u003e\u003cp\u003eThe black versions blend well with darker trim and hardware, while the white and chrome version works well on boats where a lighter rub rail and brighter accent line match the existing finish.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, rinse the rub rail with fresh water after saltwater use and clean it with mild boat soap when washing the hull. Avoid harsh solvents or aggressive abrasives, especially around insert areas, since they can affect the finish and make routine cleaning harder over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail coil\u003c\/li\u003e\n\u003cli\u003eInsert for configurations supplied with an insert\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Black \/ 30-Inch","offer_id":51554948317430,"sku":"APL640860-V1","price":364.99,"currency_code":"USD","in_stock":true},{"title":"Black\/Black \/ 50-Inch","offer_id":51554948350198,"sku":"APL640860-V7","price":556.99,"currency_code":"USD","in_stock":true},{"title":"White\/Chrome \/ 70-Inch","offer_id":51554948382966,"sku":"APL640860-V0","price":778.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1326772_apl640860.webp?v=1787847291"},{"product_id":"apl953702","title":"TACO Marine Weather Seal Tape, 10 ft x 1\/2 in x 1\/2 in, Black Rubber","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0202B10-1 is a black 1\/2 inch by 1\/2 inch weather seal tape supplied in a 10 ft length for sealing openings and covers on boats. It is made for places where water, vibration and repeated closing can become a problem, including livewells, exterior doors, instrument covers and electronic boxes.\u003c\/p\u003e\u003cp\u003eThe seal uses an EDPM synthetic rubber compound with a sponge rubber profile and medium closed-cell density. Its self-adhesive backing helps it sit in place during installation, while the rubber compresses to help reduce leaks, rattling and impact between contact surfaces.\u003c\/p\u003e\u003cp\u003eThis is a practical replacement or upgrade seal for boat owners working on trim, hatch, lid or enclosure areas that see spray, sun and changing temperatures. The black color keeps the finished edge low-profile on many deck and cockpit installations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 ft length with a 1\/2 inch width and 1\/2 inch height for a square sealing profile.\u003c\/li\u003e\n\u003cli\u003eBlack weather seal tape made for livewells, exterior doors, instrument covers and electronic boxes.\u003c\/li\u003e\n\u003cli\u003eEDPM synthetic rubber compound resists water absorption, sunlight damage and extreme temperatures.\u003c\/li\u003e\n\u003cli\u003eSponge rubber with medium closed-cell density helps absorb shock and reduce vibration.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty self-adhesive backing supports straightforward placement on clean, prepared surfaces.\u003c\/li\u003e\n\u003cli\u003eHelps reduce leaks and rattling where lids, doors or covers close against a sealing surface.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, the mounting surface should be clean, dry and free of old adhesive, salt, wax or grease. A careful test fit is useful before removing the backing, especially around corners, hatch frames or box lids where the seal needs to compress evenly.\u003c\/p\u003e\u003cp\u003eThe 1\/2 inch by 1\/2 inch profile is best matched to openings with enough clearance for compression. On doors and covers, the seal should contact the mating surface without forcing hinges, latches or hardware out of alignment.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis weather seal suits maintenance work on fishing boats, center consoles, cruisers and sailboats where lockers, livewells, electronics covers or exterior access doors need a cleaner seal. It is especially useful in areas exposed to spray, washdowns, vibration from running gear or repeated opening and closing during a day on the water.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51555348218102,"sku":"APL953702","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370311_apl953702_jpeg.jpg?v=1787856165"},{"product_id":"apl693019","title":"TACO Marine SuproFlex Semi-Rigid Rub Rail Kit, 2 in x 1-1\/4 in, Flexible Vinyl Overlay Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Semi-Rigid Medium is a rub rail kit for replacing or upgrading the protective rail around smaller boat hulls, with a 2\" height and 1-1\/4\" width profile. It uses a semi-rigid vinyl backing with a firmer 95-durometer front and a flexible vinyl overlay insert, giving the hull edge a finished look while helping absorb routine contact at docks, slips, trailers, and rafting points.\u003c\/p\u003e\u003cp\u003eThis kit comes in one continuous coil in 60' or 80' lengths, depending on the selected variant. The continuous coil format helps reduce joints around the hull, while the predrilled profile, minimal heating requirement, and no pre-forming requirement make it practical for refits on center consoles, bay boats, bass boats, and similar boats in the 15 to 22-foot range.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2\" x 1-1\/4\" medium SuproFlex profile for hull edge protection on smaller powerboats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded construction combines a semi-rigid vinyl back with a 95-durometer front face.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage everyday impact from docks, pilings, and close-quarters handling.\u003c\/li\u003e\n\u003cli\u003eFlexible vinyl overlay insert is included and fits this SuproFlex profile.\u003c\/li\u003e\n\u003cli\u003eContinuous 60' or 80' coil options reduce the need for extra seams around the boat.\u003c\/li\u003e\n\u003cli\u003ePredrilled rail saves layout time when fastening the profile to the hull.\u003c\/li\u003e\n\u003cli\u003eRequires no pre-forming and only minimal heating during installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex rub rail kit is offered in multiple configurations based on length, rub rail color, and insert color.\u003c\/p\u003e\u003cp\u003eThe 60' option is available in black with a black insert, while the 80' length is available in black with a black insert or Arctic White with an Arctic White insert. The 2\" x 1-1\/4\" SuproFlex profile, flexible overlay insert style, and included stainless-steel end caps and screws remain consistent across the listed variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9993BBK60-2: 60' length, black rub rail, black insert. This length suits smaller hulls where a 60' continuous coil is enough to run the perimeter without buying excess material.\u003c\/li\u003e\n\u003cli\u003eV11-9993BBK80-2: 80' length, black rub rail, black insert. The longer black configuration works for boats that need more coverage while keeping a dark trim line around the hull.\u003c\/li\u003e\n\u003cli\u003eV11-9993WWK80-2: 80' length, Arctic White rub rail, Arctic White insert. The white configuration keeps the rub rail visually close to light gelcoat and deck styling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMeasure the full perimeter of the existing rub rail path before selecting a length, including curves around the bow and stern corners. The rail is supplied as a continuous coil, so handling the coil with two people makes installation cleaner and helps keep tension even as it is fastened around the hull.\u003c\/p\u003e\u003cp\u003eThe predrilled profile helps with fastener placement, and the minimal heating requirement is useful when working around curves. As with any rub rail replacement, the hull edge should be clean and the old fasteners, sealant, and damaged backing material should be removed before the new rail is fitted.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a strong match for owners replacing a worn or cracked rub rail on center console fishing boats, bay boats, bass boats, and other small craft that see regular dock contact. It is also useful during cosmetic refits when the goal is to refresh the hull line while keeping a practical impact buffer in place.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex semi-rigid rub rail coil\u003c\/li\u003e\n\u003cli\u003eFlexible vinyl overlay insert\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"60' \/ Black \/ Black","offer_id":51555420274934,"sku":"APL693019-V1","price":814.99,"currency_code":"USD","in_stock":true},{"title":"80' \/ Black \/ Black","offer_id":51555420307702,"sku":"APL693019-V2","price":999.99,"currency_code":"USD","in_stock":true},{"title":"80' \/ Arctic White \/ Arctic White","offer_id":51555420340470,"sku":"APL693019-V3","price":1052.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327894_apl693019.webp?v=1787857166"},{"product_id":"apl364870","title":"TACO Marine SuproFlex Small Rub Rail Kit, 1-19\/32 in x 25\/32 in, 60 ft, Flex Chrome Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Small Rub Rail Kit is a 60 ft co-extruded vinyl rub rail kit for replacing or upgrading the protective rail along a boat hull. It measures 1-19\/32 in high by 25\/32 in wide and uses a soft front surface over a more rigid backing, giving the rail a practical balance of flex and impact absorption at docks, pilings, lifts, and raft-up contact points.\u003c\/p\u003e\u003cp\u003eThis kit is made for owners and yards that need a rub rail that can follow common hull shapes without the heavy handling of a metal rail. The SuproFlex profile requires minimal heating and does not need pre-forming, which helps during refits where the rail has to wrap cleanly around curves, corners, and transom areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 ft rub rail kit sized at 1-19\/32 in high by 25\/32 in wide for small rub rail replacement and refit projects.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl construction uses two hardness levels, with a rigid backing and a softer front contact surface.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help the rail take everyday impact from docks, trailers, pilings, and close-quarters handling.\u003c\/li\u003e\n\u003cli\u003eUltra-flexible profile can mold to most hull shapes with minimal heating and no pre-forming.\u003c\/li\u003e\n\u003cli\u003eUses TACO Marine Flex Chrome insert V12-0307 for a finished trim look across both color options.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Small Rub Rail Kit is offered in two color configurations for matching the existing trim line or changing the look of the hull during a refit.\u003c\/p\u003e\u003cp\u003eThe profile size, 60 ft length, Flex Chrome insert style, and #8 screw spacing at 4 in on center remain consistent across the listed configurations. The visible rub rail color is the main difference between the variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9960BBK60-2: Black rub rail with Flex Chrome insert. The black rail gives the hull side a defined trim line and is a common match for darker boat accents, windshields, hardware, and graphics.\u003c\/li\u003e\n\u003cli\u003eV11-9960WCM60-2: Frosty White rub rail with Flex Chrome insert. The white rail keeps the trim line lighter visually and is a natural fit for boats with white hulls, topsides, or existing white rub rail profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis profile is suited for hull-side rub rail replacement where the existing rail dimensions and shape are compatible with a 1-19\/32 in by 25\/32 in profile. Before ordering, compare the old rail height, width, insert style, and available mounting surface, especially around tight bow curves and transom corners.\u003c\/p\u003e\u003cp\u003eThe 60 ft length works well for many smaller boats or partial rail replacement projects, but the required length should be checked against the full perimeter being covered. Extra length is useful when trimming ends cleanly or working around hardware, end caps, and corners.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a good match for boat owners, marine service yards, and builders handling cosmetic refits, impact protection upgrades, or replacement of worn vinyl rub rail. It is especially practical for boats that see regular dock contact, trailer loading, marina slips, fishing use, and coastal cruising where the hull edge needs protection without adding a heavy metal rail.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black","offer_id":51555530375414,"sku":"APL364870-V5","price":636.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51555530408182,"sku":"APL364870-V9","price":669.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371209_apl364870_jpeg.jpg?v=1787859214"},{"product_id":"apl032633","title":"C.E.Smith Flex Keel Pad - Edge Cover Style - 10\" x 1-1\/2\" - Black 16870","description":"\u003cp\u003e\u003cstrong\u003eFlex Keel Pad - Edge Cover Style - 10\" x 1-1\/2\" - Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese black poly pads cushion the trailer cross members to protect your boat keel. Edge cover style mounts on the trailing edge of any width cross member or axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack poly material\u003c\/li\u003e\n\u003cli\u003e10\" L x 1-1\/2\" W\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick\u003c\/li\u003e\n\u003cli\u003e4-1\/2\" hole centers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount using two rivets or screws through the top (hardware not included).\u003c\/p\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":51555583328502,"sku":"APL032633","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1092561_apl032633jpg.jpg?v=1787860445"},{"product_id":"apl554737","title":"TACO Marine SuproFlex Rub Rail End Cap, For V11-9970, Large, Type-316L SS, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0276 is a large stainless steel SuproFlex end cap for finishing the stern end of a TACO SuproFlex V11-9970 rub rail installation. It gives the rub rail a clean termination point and helps keep the insert seated at the end of the rail, which matters on boats where dock contact, washdowns, and vibration can work on exposed trim edges over time.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror polish finish, so it matches bright stainless trim hardware and suits exposed exterior locations. It is sized for the large SuproFlex application and uses a #8 screw for mounting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO SuproFlex V11-9970 rub rail installations.\u003c\/li\u003e\n\u003cli\u003eLarge end cap closes off the rub rail at the stern for a finished look.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert in place at the end of the run.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction supports use in wet and saltwater boat environments.\u003c\/li\u003e\n\u003cli\u003eMirror polish stainless finish matches polished deck hardware and trim.\u003c\/li\u003e\n\u003cli\u003eUses a #8 screw for installation.\u003c\/li\u003e\n\u003cli\u003eCovered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part is for the SuproFlex V11-9970 rub rail profile. It should be matched to that rail before ordering, especially when replacing only one end cap on an existing installation, since rub rail profiles can look similar but vary in shape and insert fit.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe end cap is used at the stern end of the rub rail, where it covers the exposed rail end and helps secure the insert. During installation, align the cap cleanly with the rail profile before fastening, and use the correct #8 screw type for the hull material and mounting surface.\u003c\/p\u003e\u003cp\u003eIt is a practical replacement part for refits, rub rail repairs, and new SuproFlex installations on boats where a clean stern finish is needed without changing the full rail system.\u003c\/p\u003e\u003ch6\u003eMaterials and finish\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong choice for exterior trim pieces that see spray, dockside moisture, and regular cleaning. The mirror polish finish gives the cap a finished appearance that blends well with stainless cleats, rail fittings, hinges, and other polished hardware around the transom.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51555653943542,"sku":"APL554737","price":54.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109056_apl554737jpg.jpg?v=1787861014"},{"product_id":"apl032736","title":"C.E.Smith Flex Keel Pad - Full Cap Style - 12\" x 3\" - Gold 16871","description":"\u003cp\u003e\u003cstrong\u003eFlex Keel Pad - Full Cap Style - 12\" x 3\" - Gold\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese Thermal Plastic Rubber (TPR) pads cushion the trailer cross members to protect your boat keel. Full cap style mounts on the center of any 3\" wide cross member or axle that the keel might hit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYellow TPR\u003c\/li\u003e\n\u003cli\u003e3\" W x 12\" L\u003c\/li\u003e\n\u003cli\u003e5\/16\" thick\u003c\/li\u003e\n\u003cli\u003e3\/4\" deep sides for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMount using four rivets or screws, two through each side (hardware not included).\u003c\/p\u003e","brand":"C.E. Smith","offers":[{"title":"Default Title","offer_id":51557025874166,"sku":"APL032736","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1092562_apl032736jpg.jpg?v=1787867420"},{"product_id":"apl843231","title":"TACO Marine Rub Rail End Cap, 1-7\/8 in, 316 Stainless Steel, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0039 is a stainless steel rub rail end cap for finishing the end of a 1-7\/8\" rub rail installation. It gives the stern end of the rail a clean termination point while helping keep the rub rail insert seated and protected at the exposed end.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type 316L stainless steel with a polished finish, a good match for boats that see saltwater, spray, dock contact, and routine washdowns. Its listed dimensions are 2-19\/64\" long, 25\/32\" high, and 1-7\/8\" wide, and it uses a #10 screw for fastening.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-7\/8\" rub rail applications where the end of the rail needs a finished cap\u003c\/li\u003e\n\u003cli\u003eMade from Type 316L stainless steel for corrosion resistance in marine environments\u003c\/li\u003e\n\u003cli\u003ePolished finish helps the end cap blend with stainless rub rail hardware and trim\u003c\/li\u003e\n\u003cli\u003eCaps the stern end of the rub rail and helps keep the insert from working loose\u003c\/li\u003e\n\u003cli\u003eMeasures 2-19\/64\" long, 25\/32\" high, and 1-7\/8\" wide for fit checks before installation\u003c\/li\u003e\n\u003cli\u003eUses a #10 screw, making it straightforward to match with common rub rail fastening hardware\u003c\/li\u003e\n\u003cli\u003eBacked by a five-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis end cap is listed for use with several TACO rub rail profiles, including V21-1039, V21-9647, V21-9659, V21-9662, V21-9811, and V21-9866. Fit should be checked against the existing rail profile before drilling, especially on older boats where rub rail sections may have been replaced or modified over time.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe end cap is typically installed at the stern end of the rub rail after the rail and insert are seated. A dry fit before fastening helps confirm the cap sits flush, covers the cut end cleanly, and does not pinch the insert out of shape.\u003c\/p\u003e\u003cp\u003eIt is a practical finishing part for refits, collision repairs, rub rail replacement, or cosmetic cleanup where the exposed end of the rail needs protection and a neater appearance. Boat owners working on center consoles, bay boats, cruisers, and similar fiberglass hulls can use it to complete the rub rail run without leaving the insert edge open to movement or damage.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the end cap with fresh water after saltwater use and avoid harsh cleaners that can dull the polished stainless finish. During seasonal service, check that the fastener remains tight and that the rub rail insert is still seated properly behind the cap.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51557259313398,"sku":"APL843231","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370507_apl843231_jpeg.jpg?v=1787872931"},{"product_id":"apl640104","title":"TACO Marine SuproFlex Semi-Rigid Vinyl Rub Rail Kit, 1-5\/8 in x 7\/8 in x 60 ft, Vinyl Overlay Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Semi-Rigid SuproFlex Small Rub Rail Kit is a 60 ft replacement rub rail kit for small 15 to 22 ft boats, including bass boats, fish boats, and bay boats. The profile measures 1-5\/8 in x 7\/8 in and combines a semi-rigid backing with a 95-durometer front face, giving the hull edge a rub rail that can take everyday dock contact while still being manageable during installation.\u003c\/p\u003e\u003cp\u003eThis kit uses a co-extruded vinyl construction with shock-absorbing channels and a flexible vinyl overlay insert. It comes in one continuous coil, requires no pre-forming, and needs only minimal heating, which helps when working around the bow, stern corners, and the changing radius of smaller hulls.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 ft continuous coil supports a cleaner installation around small boat hulls with fewer transitions.\u003c\/li\u003e\n\u003cli\u003e1-5\/8 in x 7\/8 in profile suits many compact rub rail replacement projects on 15 to 22 ft boats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl has two levels of hardness, with a semi-rigid back and a 95-durometer front face.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help the rail manage common contact from docks, pilings, and trailer handling.\u003c\/li\u003e\n\u003cli\u003eFlexible V12-9992 overlay vinyl insert is included with the kit and is matched to this rub rail profile.\u003c\/li\u003e\n\u003cli\u003ePredrilled rail saves layout time and helps keep fastener spacing consistent during installation.\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps and screws are included for a finished installation at the rail ends.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Small rub rail kit is offered in two color configurations. Both variants use the same 60 ft length, the same 1-5\/8 in x 7\/8 in profile, and the same included F16-0039 stainless-steel end caps.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the rub rail color and the matching insert color. That choice affects how the rail blends with the hull, deck cap, or existing trim.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9991BBK60-2: Black rub rail with black insert. This configuration gives the hull edge a darker trim line and works well where existing hardware, graphics, or rub rail sections are already black.\u003c\/li\u003e\n\u003cli\u003eV11-9991WWK60-2: Arctic White rub rail with Arctic White insert. This configuration keeps the rub rail visually lighter and is a natural match for many white hulls and deck caps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe semi-rigid back gives the rail enough structure to sit cleanly along the hull-to-deck joint, while the continuous coil format keeps the installation practical for a full perimeter replacement. The rail is predrilled for fasteners, so the main fit checks are the profile size, the 60 ft required length, and whether the existing mounting surface can accept this shape.\u003c\/p\u003e\u003cp\u003eFor best results, compare the 1-5\/8 in height and 7\/8 in width against the original rub rail profile before ordering. This is especially important on older boats where the rub rail may be covering a hull and deck seam, previous fastener holes, or cosmetic repairs.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for boat owners refreshing a worn or damaged rub rail on a smaller fishing boat, bass boat, or bay boat used around docks, ramps, slips, and trailers. It is also useful when a refit needs the rub rail and insert replaced together so the finished edge looks consistent from bow to stern.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 ft Semi-Rigid SuproFlex Small rub rail\u003c\/li\u003e\n\u003cli\u003eV12-9992 flexible vinyl overlay insert\u003c\/li\u003e\n\u003cli\u003eF16-0039 stainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eStainless-steel screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Arctic White \/ Arctic White","offer_id":51557308891382,"sku":"APL640104-V2","price":634.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ Black","offer_id":51557308924150,"sku":"APL640104-V1","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327888_apl640104.webp?v=1787873814"},{"product_id":"apl483287","title":"TACO Marine Flexible Vinyl Rub Rail Kit, 1-7\/8 in x 1-1\/8 in, Black Rail, Black Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V11-2423 Kit is a flexible vinyl rub rail kit for replacing or upgrading the protective rail around medium-size boats. It uses a 1-7\/8 in. profile and is supplied in 50 ft. or 70 ft. lengths with a black rub rail and black insert, giving the hull-to-deck joint a finished look while adding a cushioning edge for dock contact, rafting, and everyday handling.\u003c\/p\u003e\u003cp\u003eThis kit is a practical match for fish boats, bay boats, and commercial boat applications where the rub rail needs to follow curves without excessive heating during installation. The rail comes as a continuous coil for a clean, one-piece run, and the soft durometer vinyl helps absorb impact along the sheer line.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible vinyl rub rail kit for medium-size 22 to 30 ft. boat models\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. rub rail profile with black rub rail and black insert\u003c\/li\u003e\n\u003cli\u003eAvailable in 50 ft. and 70 ft. kit lengths to suit different hull sizes and installation plans\u003c\/li\u003e\n\u003cli\u003eSoft durometer rail helps cushion impact at docks, pilings, and alongside other boats\u003c\/li\u003e\n\u003cli\u003eTight radius bends require minimal heat, which helps during installation around corners and transom areas\u003c\/li\u003e\n\u003cli\u003eContinuous coil supports a one-piece installation with fewer visual breaks along the hull\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis flexible rub rail kit is offered in two length configurations. Both variants use a black rub rail with a black insert, so the main selection point is the amount of rail needed for the boat.\u003c\/p\u003e\u003cp\u003eThe 50 ft. kit is suited to shorter replacement runs or smaller boats within the supported size range, while the 70 ft. kit gives more material for longer perimeters or installations where extra length is needed for trimming and layout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-2423BBK50-2: Length 50'. This configuration gives a 50 ft. continuous coil for installations where a shorter rub rail run is needed.\u003c\/li\u003e\n\u003cli\u003eV11-2423BBK70-2: Length 70'. This configuration gives a 70 ft. continuous coil for longer hull perimeters or projects that need more material for fitting and trimming.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, measure the existing rub rail path around the boat and allow enough extra material for trimming, corners, and final alignment. The flexible vinyl construction helps the rail follow typical hull curves, but careful dry fitting still matters, especially around the bow and transom corners.\u003c\/p\u003e\u003cp\u003eThe black insert covers the fastener line once installed, giving the rail a cleaner finish and helping protect the hardware from direct exposure. This style works well for owners replacing a worn rail, repairing dock rash, or refreshing the hull edge during a refit.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit fits boats that see frequent dockside use, fishing days, marina slips, and workboat-style service where the rub rail takes regular contact. It is especially useful when the existing rail has become brittle, scuffed, loose, or mismatched after previous repairs.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail\u003c\/li\u003e\n\u003cli\u003eInsert\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"50'","offer_id":51557912019190,"sku":"APL483287-V1","price":704.99,"currency_code":"USD","in_stock":true},{"title":"70'","offer_id":51557912051958,"sku":"APL483287-V2","price":844.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327884_apl483287_jpeg.jpg?v=1787892294"},{"product_id":"apl734546","title":"TACO Marine Weather Seal Tape, 10 ft, 3\/16 in x 3\/8 in, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V30-0113B10-1 is a black 10 ft weather seal tape for sealing boat lids, doors, covers, and small compartments where spray, vibration, and rattling can become a problem. It uses a sponge rubber profile with adhesive backing, making it a practical replacement or upgrade for live wells, exterior access doors, instrument covers, and electronic boxes.\u003c\/p\u003e\u003cp\u003eThis tape is made for compression sealing on marine surfaces that see sun, water, temperature swings, and regular movement. It helps cushion contact points, reduce rattles, and limit water intrusion in areas where a narrow gasket strip is the right fit.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 ft black weather seal tape for marine lids, doors, covers, live wells, and small access panels.\u003c\/li\u003e\n\u003cli\u003eMedium closed-cell sponge rubber helps create a cushioned seal while reducing vibration and rattling.\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive backing keeps installation straightforward on clean, dry mounting surfaces.\u003c\/li\u003e\n\u003cli\u003eHelps protect covered areas from water intrusion, spray, sunlight exposure, and temperature changes.\u003c\/li\u003e\n\u003cli\u003eUseful for instrument covers and electronic boxes where a softer gasket strip can help protect against movement and deck-level moisture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eClean the mounting surface before applying the tape, removing old adhesive, wax, oil, salt, and loose material. A dry surface gives the adhesive the best chance to bond evenly, especially around live well lids and exterior doors that are handled often.\u003c\/p\u003e\u003cp\u003eTest the closing action before final placement. The seal should compress enough to close the gap without forcing the latch, hinge, or cover out of alignment. For corners, work slowly and avoid stretching the tape, since stretching can thin the profile and reduce sealing pressure after installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis weather seal fits boats that need a simple gasket strip for hatches, live wells, cockpit lockers, instrument covers, or small electronics enclosures. It is a good match for owners replacing worn foam or rubber tape that has flattened, cracked, lost adhesion, or started letting lids rattle underway.\u003c\/p\u003e\u003cp\u003eIt is not a substitute for structural bedding compound, underwater sealant, or a gasket that must meet a specified fuel, oil, or pressure rating. Use it where a compressible weather strip is the correct sealing method.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the seal during regular washdowns and seasonal service. Replace it when the rubber no longer rebounds, the adhesive lifts, or the lid begins to rattle again. Keeping the surface clean and free of heavy residue helps the seal maintain contact and keeps the closing surface consistent over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51558215287030,"sku":"APL734546","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370313_apl734546_jpeg.jpg?v=1787898924"},{"product_id":"apl059730","title":"TACO Marine Flexible Vinyl Rub Rail Kit, 1-1\/4 in x 15\/16 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine V11-3447 Kit is a flexible vinyl rub rail replacement kit for small boats that need practical hull edge protection and a clean finished profile. The rub rail profile measures 1-1\/4\" high x 15\/16\" wide and is used on many 16 to 22 foot boat applications, including fish boats, bay boats, flats boats, and commercial workboats.\u003c\/p\u003e\u003cp\u003eThis kit is built around a flexible vinyl rail with a matching insert, so it can follow the shape of the hull and cushion normal contact with docks, pilings, and other close-quarters impacts. The continuous coil format helps reduce joints during installation, which is especially useful when replacing an older rub rail around the full perimeter of a fiberglass boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible vinyl rub rail profile measures 1-1\/4\" high x 15\/16\" wide for small boat rub rail replacement projects.\u003c\/li\u003e\n\u003cli\u003eSoft durometer vinyl helps absorb everyday bumps from docks, pilings, and tight marina handling.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format supports a one-piece run around the boat with fewer cut points.\u003c\/li\u003e\n\u003cli\u003eTight-radius bends can be made with minimal heat, which helps during bow and transom corner installation.\u003c\/li\u003e\n\u003cli\u003eAvailable in 50 foot and 70 foot kit lengths, with black or Arctic White rail and insert color combinations.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis flexible vinyl rub rail kit is offered in multiple configurations for length, rail color, and insert color. All variants use the same V11-3447 flexible vinyl rub rail profile, with the same 1-1\/4\" x 15\/16\" cross section.\u003c\/p\u003e\u003cp\u003eThe main choice is the amount of rail needed for the boat and the color combination that matches the hull, deck line, or existing trim. Black gives a more traditional rub rail look, while Arctic White blends better with lighter fiberglass finishes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-3447BWK50-2: 50 feet, black rail, Arctic White insert. This option keeps the outside rail dark while adding a lighter insert line for contrast against white or light-colored hulls.\u003c\/li\u003e\n\u003cli\u003eV11-3447BBK50-2: 50 feet, black rail, black insert. This configuration gives the rub rail a uniform black appearance along the hull edge.\u003c\/li\u003e\n\u003cli\u003eV11-3447BBK70-2: 70 feet, black rail, black insert. The longer coil suits boats that need more perimeter coverage while keeping the same all-black finish.\u003c\/li\u003e\n\u003cli\u003eV11-3447WWK50-2: 50 feet, Arctic White rail, Arctic White insert. This version gives the rub rail a lighter look that pairs well with white fiberglass and bright topside trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible vinyl rub rail\u003c\/li\u003e\n\u003cli\u003eVinyl insert\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for boat owners replacing a worn, faded, cracked, or damaged rub rail during a restoration or hull refresh. Before ordering, measure the full rub rail path around the boat, including the bow and transom corners, then allow enough extra length for trimming and final fitting.\u003c\/p\u003e\u003cp\u003eThe flexible vinyl construction is helpful around curved sections where a rigid profile would be harder to work. Basic hand tools are typically enough for the job, but careful layout, consistent fastener spacing, and a clean hull flange make a noticeable difference in the finished result.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn small fishing boats, bay boats, flats boats, and workboats, the rub rail is one of the first contact points during docking, rafting, loading, and trailer handling. This kit gives the hull edge a replaceable cushion while also restoring the visual line between the hull and deck.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"50 feet \/ Black \/ Arctic White","offer_id":51558425460982,"sku":"APL059730-V3","price":512.99,"currency_code":"USD","in_stock":true},{"title":"50 feet \/ Arctic White \/ Arctic White","offer_id":51558425493750,"sku":"APL059730-V8","price":589.99,"currency_code":"USD","in_stock":true},{"title":"50 feet \/ Black \/ Black","offer_id":51558425526518,"sku":"APL059730-V1","price":507.99,"currency_code":"USD","in_stock":true},{"title":"70 feet \/ Black \/ Black","offer_id":51558425559286,"sku":"APL059730-V2","price":647.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327880_apl059730_jpeg.jpg?v=1787902466"},{"product_id":"apl483288","title":"TACO Marine Flexible Vinyl Rub Rail Kit, 1-7\/8 in x 1-3\/8 in, Black Rail, Black Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Flexible Vinyl Medium 1-7\/8\" x 1-3\/8\" Rub Rail Kit is a rub rail replacement kit made from flexible black vinyl with a matching black insert. It is used to refresh the protective rail around the boat’s hull-to-deck joint while giving the sheer line a clean, finished look.\u003c\/p\u003e\u003cp\u003eThe profile measures 1-7\/8\" x 1-3\/8\" and is offered in 50' and 70' lengths, giving boat owners and yards two practical options for matching the rail run around the vessel. The rub rail comes in a continuous coil, which helps avoid unnecessary seams during installation.\u003c\/p\u003e\u003cp\u003eThis kit fits the kind of rub rail work commonly done on flats boats, bass boats, skiffs and center consoles, especially when the goal is to replace worn vinyl, cover dock rash, or restore protection along the outside edge of the hull.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlexible vinyl rub rail profile measuring 1-7\/8\" x 1-3\/8\" for medium rub rail replacement work.\u003c\/li\u003e\n\u003cli\u003eBlack rub rail with black insert for a low-profile finish along the hull side.\u003c\/li\u003e\n\u003cli\u003eContinuous coil helps create a cleaner installation with fewer visible breaks in the rail.\u003c\/li\u003e\n\u003cli\u003eSoft durometer material cushions minor contact from docks, pilings and everyday handling around the marina.\u003c\/li\u003e\n\u003cli\u003eTight-radius bends can be formed with minimal heat, which helps during installation around bow curves and transom corners.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail kit is offered in multiple length configurations with the same black rub rail and black insert combination.\u003c\/p\u003e\u003cp\u003eThe main difference between the variants is the total kit length. The 50' option suits shorter rail runs or partial replacement work, while the 70' option gives more material for larger hulls or installations that need a longer continuous run.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-3426BBK70-2: Length 70'. This length gives more coverage for boats with a longer perimeter or layouts where extra material helps keep the rail run continuous.\u003c\/li\u003e\n\u003cli\u003eV11-3426BBK50-2: Length 50'. This length fits smaller boats or installations where a shorter continuous coil is enough for the planned rub rail replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail\u003c\/li\u003e\n\u003cli\u003eV12-0005 insert\u003c\/li\u003e\n\u003cli\u003eF90-0001 end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, measure the existing rail path around the boat and allow for corners, trimming and any overlap needed at the ends. Matching the 1-7\/8\" x 1-3\/8\" profile to the boat’s original rail area is important, especially when covering previous fastener holes or following an existing hull-to-deck joint.\u003c\/p\u003e\u003cp\u003eThe flexible vinyl construction is useful for boat owners handling the job themselves, but the rail should still be worked carefully around curves so it sits flat and follows the boat’s line. The included insert finishes the face of the rail after the main extrusion is fastened in place.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for boaters restoring a work-worn rub rail after years of docking, trailering, fishing and washdowns. It also works for refit projects where the boat needs a cleaner black rail without changing the overall style of the hull.\u003c\/p\u003e\u003cp\u003eBecause the kit includes the rail, insert, end caps, screws and installation guide, it keeps the main parts for a standard rub rail replacement together in one package.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"50'","offer_id":51558707134710,"sku":"APL483288-V1","price":762.99,"currency_code":"USD","in_stock":true},{"title":"70'","offer_id":51558707167478,"sku":"APL483288-V2","price":982.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327935_apl483288_jpeg.jpg?v=1787908513"},{"product_id":"apl869369","title":"TACO Marine Medium SuproFlex Rub Rail End Cap, For V11-9990, 316L Stainless Steel, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0272 is a stainless steel medium SuproFlex rub rail end cap for finishing the end of a TACO Marine V11-9990 rub rail installation. It caps the rub rail at the stern, giving the run a clean termination while helping keep the insert in place where the rail ends.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror-polished finish, so it suits exposed exterior areas where saltwater, spray, and dockside contact are part of normal use. It is a practical replacement or finishing piece for boat owners, riggers, and yards working on SuproFlex rub rail repairs or new rub rail installations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for TACO Marine SuproFlex V11-9990 medium rub rail installations.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction for exposed marine use.\u003c\/li\u003e\n\u003cli\u003eMirror-polished finish matches polished stainless deck and hull hardware.\u003c\/li\u003e\n\u003cli\u003eCaps the rub rail at the stern for a finished edge at the end of the run.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert seated at the termination point.\u003c\/li\u003e\n\u003cli\u003eUses #8 countersunk screw mounting for a flush fastener appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eUse this end cap where the V11-9990 SuproFlex rub rail terminates, commonly at the stern or another visible end point on the hull. Before fastening, confirm the rail profile, insert position, and cap alignment so the end cap sits cleanly against the rub rail without forcing the insert or distorting the rail.\u003c\/p\u003e\u003cp\u003eBecause the cap uses #8 countersunk screw mounting, the fastener heads can sit neatly in the cap when installed with matching countersunk hardware. On fiberglass hulls, proper pilot holes, bedding compound, and careful screw tension help reduce the risk of gelcoat cracking and water intrusion around the fasteners.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong choice for hardware near the waterline, swim platform, transom, or other areas that see spray and washdowns. The mirror-polished finish gives the cap a clean look against polished rub rail components and other stainless hardware on the boat.\u003c\/p\u003e\u003cp\u003eThis part is a good match for owners refreshing a worn rub rail end, completing a stern rub rail repair, or replacing a missing cap on a compatible SuproFlex setup.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51559114899702,"sku":"APL869369","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324149_apl869369.png?v=1787913736"},{"product_id":"apl1663487","title":"TACO Marine Aluminum Rub Rail, 7\/8\"W x 1-5\/16\"H x 12'L, Brite Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A12-0303BLY12D is a brite anodized aluminum rub rail for protecting the hull and deck joint on powerboats, especially in the 16 to 24 foot range. It measures 7\/8 inch wide by 1-5\/16 inches high and is sold in a 12 foot length, giving boat owners and yards a rigid replacement profile for refits, repairs, and restoration work.\u003c\/p\u003e\u003cp\u003eThis rub rail is made for boats that need a classic aluminum edge with a clean polished look and a finish that can handle normal marine exposure. The profile is drilled and countersunk for #10 screws on 6 inch centers, which helps keep fastener spacing consistent during installation along the sheer line or hull-deck seam.\u003c\/p\u003e\u003cp\u003eThe rail accepts the TACO V12-0303 flexible vinyl insert, which is sold separately. That insert covers the fastener line and adds a replaceable outer contact surface, useful on boats that see dock contact, rafting, trailer loading, or regular use around pilings and slips.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eBrite anodized aluminum profile for a polished look with added protection in a marine environment.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e7\/8 inch width, 1-5\/16 inch height, and 12 foot length for matching the original rub rail profile on many powerboat applications.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDrilled and countersunk for #10 screws on 6 inch centers to support a clean, repeatable installation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAccepts TACO V12-0303 flexible vinyl insert, sold separately, to cover the fasteners and complete the rub rail assembly.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAluminum profile can be bent and formed around tight radius areas during installation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSuitable for rub rail replacement work on many 16 to 24 foot boats where this profile matches the existing hull edge.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, match the rail height, width, insert style, and fastener pattern against the existing rub rail or the boat builder’s original profile. The 12 foot rigid length is useful for long, straight runs, while the bendable aluminum profile helps the installer work around corners and bow sections when fitted carefully.\u003c\/p\u003e\u003cp\u003eFasteners and the vinyl insert should be selected to suit the boat’s hull material and the final installation plan. Because the rail is pre-drilled and countersunk, alignment matters: dry fitting the rail before final fastening helps keep the profile straight and reduces the chance of fighting the hole spacing at the ends of each run.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a practical match for refitting older runabouts, fishing boats, cruisers, and other small to mid-size powerboats where the hull edge needs a more finished look and better protection from everyday dock contact. It is also useful when the existing aluminum rail is dented, oxidized, missing sections, or no longer holds the insert properly.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rail with fresh water after saltwater use and clean it with mild boat soap rather than harsh abrasives. During seasonal checks, inspect the fasteners and the vinyl insert so loose sections can be corrected before they damage the rail, the hull edge, or the surrounding finish.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774695964918,"sku":"APL1663487","price":260.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324090_apl1663487_jpeg.jpg?v=1790866733"},{"product_id":"apl1663485","title":"TACO Marine Aluminum Rub Rail, 1-1\/8 in x 5\/8 in, Brite, 12 ft","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A11-0347BLY12D is a brite anodized aluminum rub rail for replacing or finishing the hull-to-deck edge on boats where a classic metal rail and separate vinyl insert are preferred.\u003c\/p\u003e\u003cp\u003eThis profile measures 1-1\/8 inches high by 5\/8 inch wide and is supplied in a 12 foot length. It is drilled and countersunk for #8 screws on 6 inch centers, which helps keep fastener spacing consistent along the sheer line during installation.\u003c\/p\u003e\u003cp\u003eThe rail is made from aluminum with a brite anodized finish for use in the marine environment. It accepts the TACO Marine V12-4155 flexible vinyl insert, sold separately, so the finished rub rail can cover the fastener heads and add a cushioning surface along docks, pilings, and rafting points.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eAluminum rub rail profile sized at 1-1\/8 inches high by 5\/8 inch wide for hull and deck joint coverage.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSupplied in a 12 foot length for longer rub rail runs and replacement work.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBrite anodized finish helps the metal surface hold up in saltwater, spray, sun, and regular washdowns.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled and countersunk for #8 screws on 6 inch centers to simplify layout and fastening.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFormable profile can be bent around tight radius areas common at bows and transom corners.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAccepts V12-4155 flexible vinyl insert, sold separately, to hide fasteners and add impact cushioning.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSuited for many 16 to 24 foot boats that use a narrow aluminum rub rail with a vinyl insert.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis rub rail is a practical match for owners replacing a similar aluminum profile or restoring a boat that originally used an aluminum rail with a separate vinyl insert. The main fit checks are the 1-1\/8 inch height, 5\/8 inch width, 12 foot section length, #8 screw pattern, and V12-4155 insert compatibility.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the existing rail shape and measurements on the boat, including how the rail sits over the hull-to-deck joint. Aluminum rub rail is not universal by brand or hull shape, so the profile and insert style matter as much as the overall length.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe pre-drilled holes reduce layout work, but the hull should still be checked for backing, old hole locations, and fair alignment before fastening. On replacement jobs, dry fitting the rail first helps confirm the bend around the bow and any corner transitions before sealant and final screws are applied.\u003c\/p\u003e\u003cp\u003eThe vinyl insert should be installed after the aluminum rail is fastened. Because the insert is sold separately, it should be matched to the V12-4155 profile and ordered in enough length to cover the finished run.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rail works well for small and mid-size powerboats, fishing boats, runabouts, and restorations where the rub rail needs to protect the hull edge while keeping the bright aluminum look. It is especially useful where the boat sees dock contact, fender movement, trailer handling, and routine washdowns.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774696095990,"sku":"APL1663485","price":180.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324084_apl1663485_jpeg.jpg?v=1790866745"},{"product_id":"apl1663483","title":"TACO Marine Aluminum Overlap Rub Rail, 12 ft, 1 in H x 1\/2 in T, Clear Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A11-0152TAL12D-A is a polished clear anodized aluminum overlap rub rail for boat hull edges, seams, and trim areas where a clean metal profile is needed without a separate insert. This 12-foot aluminum section has a 1 inch high profile with a 7\/16 inch width, making it useful for replacement rub rail work, aluminum trim, and seam binding on compatible hull shapes.\u003c\/p\u003e\u003cp\u003eThe rail is pre-drilled and countersunk for #8 screws on 6 inch centers, which helps keep the fastener layout consistent during installation. Its anodized finish adds protection for regular marine exposure, while the aluminum profile can be bent and formed for tight-radius areas when handled and fitted carefully.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePolished clear anodized aluminum overlap profile for rub rail, trim, and molding applications.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSold as a 12-foot section for longer runs along the hull, deck edge, or seam area.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1 inch height with 7\/16 inch width for matching compatible replacement profiles.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled and countersunk for #8 screws on 6 inch centers to simplify fastening layout.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNo insert is used, giving the installation a clean metal edge without a separate vinyl or rubber insert strip.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e6063-T5 aluminum alloy supports bending and shaping during fit-up while keeping the profile strong for normal rub rail use.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePolished anodized surface helps the rail stand up to the harsh conditions around docks, washdowns, spray, and sun exposure.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering or installing, compare the profile shape and measurements against the existing rub rail or trim on the boat. This is especially important when replacing a factory rail, because a close match at the hull-to-deck joint helps the new section sit correctly and keeps the finished edge looking consistent.\u003c\/p\u003e\u003cp\u003eDuring installation, dry-fit the rail along the mounting area before final fastening. Support the 12-foot extrusion while working it around curves, and avoid forcing bends too sharply at one point. The pre-drilled screw pattern helps with alignment, but the mounting surface should still be checked for old sealant, uneven holes, or damaged core material before the new rail is secured.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a practical match for boat owners and yards replacing aluminum edge molding, cleaning up a seam, or restoring a worn rub rail profile on a compatible powerboat, fishing boat, or cruiser. It is most useful where a metal overlap rail is already part of the boat’s construction or where a finished aluminum trim edge is preferred over an insert-style system.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774696390902,"sku":"APL1663483","price":170.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324082_apl1663483_jpeg.jpg?v=1790866767"},{"product_id":"apl1663489","title":"TACO Marine Aluminum Rub Rail, 1 in x 3\/16 in, 12 ft, Polished Clear","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A50-0197TAL12D is a 12 ft aluminum rub rail section for protecting and finishing the hull edge, deck joint, or butted seams on a boat. It measures 1 in high by 3\/16 in wide and has a polished clear anodized finish that suits exterior marine trim where a clean metal edge is preferred.\u003c\/p\u003e\u003cp\u003eThis flat-back aluminum profile is drilled and countersunk for #6 fasteners on 6 in centers, which helps keep installation spacing consistent along the run. It can be used as edge molding or a seam binder, and the profile is made to bend and form around tighter radiuses during fitting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e12 ft aluminum rub rail section for hull edges, deck joints, and seam coverage.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1 in by 3\/16 in profile gives the boat a low-profile metal trim line without using a separate insert.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePolished clear anodized finish helps the aluminum stand up to normal marine exposure.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDrilled and countersunk for #6 screws on 6 in centers to support a clean fastening layout.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFlat-back shape works well on flat surfaces and along butted seams.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAluminum profile can be bent and formed during installation where the hull or deck edge has a tighter radius.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering or cutting, match the 1 in by 3\/16 in profile to the existing rub rail footprint or the area being covered. On replacement jobs, check the height, width, screw spacing, and bend radius against the original trim so the new rail lands cleanly over old fastener holes or seam lines.\u003c\/p\u003e\u003cp\u003eFor installation, dry-fit the rail along the hull edge first and work gradually around corners rather than forcing the profile into place. Because this is a 12 ft rigid aluminum length, handling, storage, and shipping space should be considered before installation day.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rub rail is a practical fit for owners restoring classic metal trim, replacing damaged aluminum edge molding, or adding a finished protective edge to small boats, skiffs, tenders, and other fiberglass or aluminum applications where the size and fastening pattern match the job.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774696456438,"sku":"APL1663489","price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324095_apl1663489_jpeg.jpg?v=1790866789"},{"product_id":"apl1663484","title":"TACO Marine Aluminum Rub Rail, For V12-0342 Insert, 1 in x 1\/2 in x 12 ft, Anodized Aluminum, Drilled for #8 Screws","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A11-0342BLY12D is an aluminum rub rail for protecting the hull and deck joint on boats while keeping the finished edge clean and traditional in appearance. This 12 ft rail has an anodized aluminum construction with a polished clear finish, a profile about 15\/16 inch high by 1\/2 inch wide, and pre-drilled countersunk holes for #8 screws on 6 inch centers.\u003c\/p\u003e\u003cp\u003eIt accepts the TACO V12-0342 flexible vinyl insert, which is used to cover the fastener line and add a cushion at the outside edge of the rail. The insert is sold separately, so it should be matched during replacement or refit work before installation begins.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e12 ft aluminum rub rail for hull and deck joint protection on powerboats and other compatible marine applications.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAnodized aluminum with a polished clear finish helps the rail stand up to saltwater exposure while keeping a bright metal look.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProfile measures about 15\/16 inch high by 1\/2 inch wide for a low, classic rub rail edge.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-drilled and countersunk for #8 flat or oval head screws on 6 inch centers, which helps keep installation spacing consistent.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAccepts TACO V12-0342 flexible vinyl insert to cover fasteners and add impact absorption at docks, pilings, and alongside other boats.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan be formed around tight radius bends during installation when fitted with proper tools and care.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rail is a practical choice for rub rail replacement when the existing profile and insert style match the boat. Before ordering, compare the height, width, screw spacing, and insert profile against the rail being replaced, especially on older hulls where factory profiles can vary by model year.\u003c\/p\u003e\u003cp\u003eDuring installation, the rail should be dry-fitted around the bow and corners before final fastening. The pre-drilled countersunk holes help guide screw placement, while the separate vinyl insert covers the fasteners after the rail is secured.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn a working boat, the rub rail takes the everyday contact that happens around docks, trailers, pilings, and rafting situations. This aluminum profile suits owners who want a metal rub rail with a polished appearance and a replaceable vinyl insert rather than an all-vinyl edge.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774696620278,"sku":"APL1663484","price":195.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324186_apl1663484_jpeg.jpg?v=1790866798"},{"product_id":"apl1663482","title":"TACO Marine Aluminum Overlap Rub Rail, 3\/4 in x 3\/8 in, 12 ft, Polished Clear Anodized, Drilled for #8 Screws","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A11-0151TAL12D is a 3\/4-inch by 3\/8-inch aluminum rub rail for protecting a boat’s hull edge, deck joint, or seam line while keeping the clean look of polished metal. It is supplied in a 12-foot length with a polished clear anodized finish, making it a practical match for refit work, rub rail replacement, and seam protection on fiberglass boats.\u003c\/p\u003e\u003cp\u003eThis profile works as aluminum edge molding and seam binding, so it can cover vulnerable edges and help take the scuffs that happen around docks, trailers, pilings, and raft-ups. The rail is drilled and countersunk for #8 screws on 6-inch centers, which helps keep fastener spacing consistent during installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e3\/4-inch height and 3\/8-inch width for a low-profile aluminum rub rail installation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12-foot length for repairs, replacements, and longer continuous runs along the hull or deck edge.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePolished clear anodized finish helps the aluminum stand up to marine exposure while maintaining a classic metal appearance.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDrilled and countersunk for #8 screws on 6-inch centers, reducing layout work during installation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAluminum edge molding and seam binder profile helps protect exposed joints and trim lines.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan be formed to a tight radius when handled with the right bending method and installation care.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMade for use without a separate rub rail insert, keeping the installation simple and clean.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse this rail where the boat has the correct 3\/4-inch by 3\/8-inch profile and where an aluminum rub rail without an insert is the right match for the existing trim. Before drilling or fastening, dry-fit the length along the mounting line and check how the rail sits through curves, corners, and transom transitions.\u003c\/p\u003e\u003cp\u003eThe pre-drilled and countersunk holes are spaced for #8 screws on 6-inch centers. On older boats, existing holes may not align exactly, so check the substrate and repair or seal previous fastener holes as needed before final installation. Proper bedding and sealing around fasteners are important in wet areas, especially around the hull-to-deck joint.\u003c\/p\u003e\u003ch6\u003eFit and use on board\u003c\/h6\u003e\u003cp\u003eThis aluminum rub rail is a good fit for boat owners and yards replacing worn edge trim, restoring a classic metal rub rail look, or adding protection to an exposed seam. It is useful on boats that see regular docking, trailering, and contact with fenders or pilings, where the rail needs to take everyday abrasion before the hull side does.\u003c\/p\u003e\u003cp\u003eThe polished clear anodized finish gives the rail a bright metal appearance that works well on traditional runabouts, fishing boats, small cruisers, and other vessels using aluminum trim rather than vinyl insert-style rub rail systems.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the rail with fresh water after saltwater use and wash it with mild boat soap during routine cleaning. Avoid aggressive abrasives that can dull the anodized surface. During seasonal checks, inspect the fasteners and sealant line so the rail stays tight and the joint underneath remains protected.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774696915190,"sku":"APL1663482","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324080_apl1663482.png?v=1790866830"},{"product_id":"apl1663488","title":"TACO Marine Aluminum Rub Rail, 3\/4 in x 1\/4 in, 12 ft, Clear Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A50-0195TAL12D is an aluminum rub rail for adding a polished protective edge to a boat hull, deck joint, or exposed seam. It has a 3\/4 inch by 1\/4 inch profile, a 12 foot length, and a polished, clear anodized finish that suits bright trim layouts on runabouts, center consoles, sport boats, and restoration projects.\u003c\/p\u003e\u003cp\u003eThis rub rail works as both edge molding and a seam binder, so it is useful where the boat needs a clean metal trim line without a separate insert. The rail is drilled and countersunk for #5 screws on 6 inch centers, which helps keep installation spacing consistent along straight runs and shaped sections.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eAluminum rub rail with a 3\/4 inch by 1\/4 inch profile for hull edges, deck joints, and seam coverage.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12 foot length for longer trim runs along gunwales, transoms, cockpit edges, or other exposed boat seams.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePolished, clear anodized finish adds a bright metal trim line and helps the aluminum stand up to the marine environment.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDrilled and countersunk for #5 screws on 6 inch centers for a clean fastener layout during installation.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan be bent and formed to a tight radius, which helps when matching curved boat contours.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWorks without a vinyl insert, keeping the finished look simple and traditional.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, compare the 3\/4 inch by 1\/4 inch profile against the existing rub rail or the seam area it will cover. This style is a good fit when the boat needs a low-profile metal edge rather than a larger impact rail with a separate insert.\u003c\/p\u003e\u003cp\u003eUse the pre-drilled holes as the spacing guide and fasten with compatible #5 screws. On older hulls, check the backing material and seal each fastener point as needed so water does not migrate into the joint or core.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rail is well suited for owners replacing worn aluminum trim, cleaning up a hull-deck joint, or finishing a restoration where a classic polished metal rub rail matches the boat better than a black vinyl profile. It is especially practical around areas that need a neat edge and light protection from dock contact, fenders, lines, and normal boarding use.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRinse the rail with fresh water after saltwater use and clean it with mild boat soap. Avoid harsh abrasives that can dull the anodized finish, especially on visible trim runs where the polished surface is part of the boat’s appearance.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774697013494,"sku":"APL1663488","price":130.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324093_apl1663488_jpeg.jpg?v=1790866858"},{"product_id":"apl1663486","title":"TACO Marine Aluminum Rub Rail, 1-1\/2 in x 5\/8 in, 12 ft, Clear Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine A11-0638TAL12D is a clear anodized aluminum rub rail base for protecting the hull-to-deck joint on many 16 to 24 ft boats. It measures 12 ft long, with a 1-1\/2 in height and 5\/8 in width, giving runabouts, center consoles, cuddy cabins, and small cruisers a clean metal rub rail profile for dockside contact and everyday handling.\u003c\/p\u003e\u003cp\u003eThis rail accepts a flexible vinyl insert, with TACO Marine V12-0338 commonly used as the matching insert and sold separately. The aluminum profile is drilled and countersunk for #8 fasteners on 6 in centers, which helps keep installation consistent along the sheer line when replacing worn rub rail or refitting a damaged section.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e12 ft clear anodized aluminum rub rail base for hull-side protection and a finished edge at the hull-to-deck joint.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1-1\/2 in height and 5\/8 in width suit many small to mid-size powerboats in the 16 to 24 ft range.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAccepts a flexible vinyl insert, so impact contact is handled by a replaceable insert rather than the aluminum base alone.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDrilled and countersunk for #8 screws on 6 in centers to support even fastening along the rail.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAnodized finish helps the aluminum stand up to saltwater exposure, spray, and regular washdowns.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFlexible aluminum profile can follow curved boat sides during installation when handled with proper support and alignment.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rub rail is a practical match for repair work, restoration projects, and rub rail replacement where the existing profile and boat size line up with the 1-1\/2 in by 5\/8 in section. Before ordering, compare the rail height, width, fastener spacing, and insert style against the rail already on the boat or the rub rail specification for the hull.\u003c\/p\u003e\u003cp\u003eThe insert and mounting fasteners are not built into the rail, so they should be planned as part of the job. Dry-fitting the rail before final fastening helps confirm the bend, hole alignment, and transition around the bow and stern corners.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOnce installed, the rail helps protect the boat during docking, trailering, rafting up, and close-quarters movement around pilings or other boats. It is a good fit for owners replacing a tired aluminum rub rail base while keeping a traditional polished metal look with a separate vinyl insert for contact protection.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51774697341174,"sku":"APL1663486","price":185.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1324087_apl1663486_jpeg.jpg?v=1790866894"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-rub-rails.oembed?page=2","provider":"Apollo Lighting","version":"1.0","type":"link"}