{"title":"Semi Rigid Rub Rail","description":"","products":[{"product_id":"apl919299","title":"TACO Marine SuproFlex Medium Rub Rail Kit, 2 in x 29\/32 in, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Medium Rub Rail Kit is a semi-rigid vinyl rub rail kit for medium boats that need hull-side protection with a clean finished edge. It measures 2 inches high by 29\/32 inch wide and is offered in 60-foot and 80-foot kit lengths, giving boat owners and installers options for matching the run around the hull.\u003c\/p\u003e\u003cp\u003eSuproFlex uses co-extruded vinyl with two hardness levels, pairing a rigid backing with a softer front face that helps absorb everyday contact from docks, pilings, and rafting alongside other boats. The profile comes in a continuous coil, so it can follow most hull shapes without pre-forming and with only minimal heat needed for bends.\u003c\/p\u003e\u003cp\u003eThis medium kit is a practical match for center consoles, bay boats, and similar boats in the 22 to 30-foot range where a full rub rail replacement or clean refit is needed. It is also predrilled for fasteners, with #10 screws spaced 4 inches on center, which helps keep installation layout consistent along the hull.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-inch by 29\/32-inch SuproFlex medium rub rail profile for rub rail replacement and refit work on many mid-size boats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl construction combines a rigid backing with a softer front face for impact absorption along the hull edge.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage dock contact, trailer handling, and light side impacts during normal boat use.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format reduces joints and helps the rail follow curved hull sections with less installation work.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming required, with minimal heat needed for bends during fitting.\u003c\/li\u003e\n\u003cli\u003ePredrilled for #10 fasteners at 4-inch centers for cleaner spacing during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with the included V12-0307 insert, with insert color matched to the selected variant.\u003c\/li\u003e\n\u003cli\u003eIncludes stainless-steel end caps and screws for a complete rub rail kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex Medium Rub Rail Kit is offered in multiple configurations so the rail length and visible color can be matched to the boat and the refit plan.\u003c\/p\u003e\u003cp\u003eThe profile size, SuproFlex construction, predrilled fastener layout, included insert family, stainless-steel end caps, screws, USA manufacture, and 5-year limited warranty are consistent across these variants. The differences are the kit length, rub rail color, and insert color used with the selected finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9990BBK60-2: Black, 60-inch length option. This version uses a black rub rail with a Flex Chrome insert, giving the hull edge a darker base with a bright accent line.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM60-2: White, 60-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert, a common look for boats with white gelcoat and bright trim.\u003c\/li\u003e\n\u003cli\u003eV11-9990BBK80-2: Black, 80-inch length option. This version keeps the black rub rail and Flex Chrome insert combination while allowing more length for a larger perimeter run.\u003c\/li\u003e\n\u003cli\u003eV11-9990GRD80-2: Grey, 80-inch length option. This version uses a gray rub rail with a gray insert for a more uniform finish along the hull side.\u003c\/li\u003e\n\u003cli\u003eV11-9990WCM80-2: White, 80-inch length option. This version uses a Frosty White rub rail with a Flex Chrome insert and provides the longer kit length for boats that need the additional run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFor a clean installation, the old rail and fasteners should be removed, the mounting surface cleaned, and the new SuproFlex coil worked around the hull before final fastening. Because the rail is flexible and does not need pre-forming, it is easier to manage around common bow and transom curves than many traditional vinyl rub rails.\u003c\/p\u003e\u003cp\u003eThe predrilled layout helps maintain even fastener spacing, but the installer should still confirm alignment, end cap placement, and insert seating before the final pass. As with any rub rail replacement, the selected kit length should be checked against the boat’s actual perimeter, including any allowance needed for trimming and end finishing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis kit suits owners restoring worn rub rail, repairing impact-damaged trim, or refreshing the look of a center console, bay boat, or similar hull. It is especially useful where the boat sees regular dockside contact, raft-ups, trailer loading, or tight marina handling.\u003c\/p\u003e\u003cp\u003eThe finish options make it easier to keep the replacement close to the boat’s existing style. Black and Frosty White versions include a Flex Chrome insert for a brighter trim line, while the gray version keeps the insert color matched to the rail for a subtler look.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex medium rub rail coil in the selected color and length\u003c\/li\u003e\n\u003cli\u003eV12-0307 insert in the color supplied with the selected variant\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Grey \/ 80-Inch","offer_id":51551049974006,"sku":"APL919299-V5","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 80-Inch","offer_id":51551050006774,"sku":"APL919299-V9","price":1069.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 60-Inch","offer_id":51551050039542,"sku":"APL919299-V7","price":769.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 80-Inch","offer_id":51551050072310,"sku":"APL919299-V6","price":964.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 60-Inch","offer_id":51551050105078,"sku":"APL919299-V1","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371213_apl919299_jpeg.jpg?v=1787807224"},{"product_id":"apl640860","title":"TACO Marine Semi-Rigid Vinyl Rub Rail Kit, Continuous Coil","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Semi-Rigid Rub Rail Kit is a vinyl rub rail replacement range for boats that need hull-edge protection and a cleaner finished profile at the deck joint. These kits cover common refit needs on center consoles, skiffs, hybrids, and other small to mid-size boats, with profiles available in 30 ft, 50 ft, and 70 ft lengths.\u003c\/p\u003e\u003cp\u003eEach configuration uses a semi-rigid vinyl rub rail that can be formed around the hull in one continuous coil, helping reduce visible joints along the sheer line. Depending on the selected variant, the profile measures 1-7\/8 in. H x 3\/4 in. W, 1-1\/2 in. H x 3\/4 in. W, or 1-5\/8 in. H x 3\/4 in. W, so checking the existing rub rail height, width, and hull shape is important before ordering.\u003c\/p\u003e\u003cp\u003eThe semi-rigid construction gives the rail enough cushion for normal contact with docks and pilings while still handling tight radius bends with minimal heat. It is a practical choice for a boat owner replacing tired rail, covering an edge after hull work, or refreshing the boat’s side profile without switching to a metal rub rail system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSemi-rigid vinyl construction gives cushioning at the hull edge during normal contact with docks, pilings, and trailer guides.\u003c\/li\u003e\n\u003cli\u003eContinuous coil format supports one-piece installation with fewer visible seams along the boat’s sheer line.\u003c\/li\u003e\n\u003cli\u003eAvailable in black and white profiles, with insert options that change the finished look of the rail.\u003c\/li\u003e\n\u003cli\u003eTight radius bends can be made with minimal heat, which helps during installation around curved bows and transom corners.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003cli\u003eProfile sizes and lengths vary by configuration, making it important to match the rail to the boat’s existing footprint before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail kit is offered in three configurations with different lengths, profile sizes, and color combinations. The variants are not just cosmetic, so the selected part should match both the boat’s required coverage length and the existing rub rail footprint.\u003c\/p\u003e\u003cp\u003eThe 30 ft black configuration is a no-insert style, while the 50 ft black configuration includes a black insert and the 70 ft white configuration uses a flexible chrome insert. The rub rail kit format, continuous coil approach, end caps, screws, and installation guide are consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-4135BKA30-3: 30 ft length, black color, no insert, 1-7\/8 in. H x 3\/4 in. W. This configuration suits shorter replacement runs where a black rub rail profile without a separate insert is needed.\u003c\/li\u003e\n\u003cli\u003eV11-9795BBK50D-2: 50 ft length, black rub rail with black insert, 1-1\/2 in. H x 3\/4 in. W. The black insert keeps the side profile visually uniform while still using an insert-style rail.\u003c\/li\u003e\n\u003cli\u003eV11-9811WCM70-2: 70 ft length, white rub rail with flexible chrome insert, 1-5\/8 in. H x 3\/4 in. W. The chrome insert gives the white rail a stainless-look accent while keeping the flexibility of a vinyl insert system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, compare the new profile against the boat’s existing rub rail height, width, and mounting surface. A close footprint match helps cover old fastener locations and keeps the rail sitting correctly against the hull and deck joint.\u003c\/p\u003e\u003cp\u003eThe coil format is useful for refits because it lets the installer work around long sections of the boat without creating unnecessary breaks. On sharper bends, controlled heat may be used to help the rail follow the curve without forcing the material.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a good match for boat owners replacing cracked, faded, or damaged rub rail after years of docking, rafting up, or trailer use. It also fits refit work where the boat needs a cleaner edge treatment after paint, gelcoat repair, or hardware changes along the hull side.\u003c\/p\u003e\u003cp\u003eThe black versions blend well with darker trim and hardware, while the white and chrome version works well on boats where a lighter rub rail and brighter accent line match the existing finish.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter installation, rinse the rub rail with fresh water after saltwater use and clean it with mild boat soap when washing the hull. Avoid harsh solvents or aggressive abrasives, especially around insert areas, since they can affect the finish and make routine cleaning harder over time.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail coil\u003c\/li\u003e\n\u003cli\u003eInsert for configurations supplied with an insert\u003c\/li\u003e\n\u003cli\u003eEnd caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Black \/ 30-Inch","offer_id":51554948317430,"sku":"APL640860-V1","price":364.99,"currency_code":"USD","in_stock":true},{"title":"Black\/Black \/ 50-Inch","offer_id":51554948350198,"sku":"APL640860-V7","price":556.99,"currency_code":"USD","in_stock":true},{"title":"White\/Chrome \/ 70-Inch","offer_id":51554948382966,"sku":"APL640860-V0","price":778.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1326772_apl640860.webp?v=1787847291"},{"product_id":"apl693019","title":"TACO Marine SuproFlex Semi-Rigid Rub Rail Kit, 2 in x 1-1\/4 in, Flexible Vinyl Overlay Insert","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine SuproFlex Semi-Rigid Medium is a rub rail kit for replacing or upgrading the protective rail around smaller boat hulls, with a 2\" height and 1-1\/4\" width profile. It uses a semi-rigid vinyl backing with a firmer 95-durometer front and a flexible vinyl overlay insert, giving the hull edge a finished look while helping absorb routine contact at docks, slips, trailers, and rafting points.\u003c\/p\u003e\u003cp\u003eThis kit comes in one continuous coil in 60' or 80' lengths, depending on the selected variant. The continuous coil format helps reduce joints around the hull, while the predrilled profile, minimal heating requirement, and no pre-forming requirement make it practical for refits on center consoles, bay boats, bass boats, and similar boats in the 15 to 22-foot range.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2\" x 1-1\/4\" medium SuproFlex profile for hull edge protection on smaller powerboats.\u003c\/li\u003e\n\u003cli\u003eCo-extruded construction combines a semi-rigid vinyl back with a 95-durometer front face.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels help manage everyday impact from docks, pilings, and close-quarters handling.\u003c\/li\u003e\n\u003cli\u003eFlexible vinyl overlay insert is included and fits this SuproFlex profile.\u003c\/li\u003e\n\u003cli\u003eContinuous 60' or 80' coil options reduce the need for extra seams around the boat.\u003c\/li\u003e\n\u003cli\u003ePredrilled rail saves layout time when fastening the profile to the hull.\u003c\/li\u003e\n\u003cli\u003eRequires no pre-forming and only minimal heating during installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis SuproFlex rub rail kit is offered in multiple configurations based on length, rub rail color, and insert color.\u003c\/p\u003e\u003cp\u003eThe 60' option is available in black with a black insert, while the 80' length is available in black with a black insert or Arctic White with an Arctic White insert. The 2\" x 1-1\/4\" SuproFlex profile, flexible overlay insert style, and included stainless-steel end caps and screws remain consistent across the listed variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9993BBK60-2: 60' length, black rub rail, black insert. This length suits smaller hulls where a 60' continuous coil is enough to run the perimeter without buying excess material.\u003c\/li\u003e\n\u003cli\u003eV11-9993BBK80-2: 80' length, black rub rail, black insert. The longer black configuration works for boats that need more coverage while keeping a dark trim line around the hull.\u003c\/li\u003e\n\u003cli\u003eV11-9993WWK80-2: 80' length, Arctic White rub rail, Arctic White insert. The white configuration keeps the rub rail visually close to light gelcoat and deck styling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMeasure the full perimeter of the existing rub rail path before selecting a length, including curves around the bow and stern corners. The rail is supplied as a continuous coil, so handling the coil with two people makes installation cleaner and helps keep tension even as it is fastened around the hull.\u003c\/p\u003e\u003cp\u003eThe predrilled profile helps with fastener placement, and the minimal heating requirement is useful when working around curves. As with any rub rail replacement, the hull edge should be clean and the old fasteners, sealant, and damaged backing material should be removed before the new rail is fitted.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis kit is a strong match for owners replacing a worn or cracked rub rail on center console fishing boats, bay boats, bass boats, and other small craft that see regular dock contact. It is also useful during cosmetic refits when the goal is to refresh the hull line while keeping a practical impact buffer in place.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSuproFlex semi-rigid rub rail coil\u003c\/li\u003e\n\u003cli\u003eFlexible vinyl overlay insert\u003c\/li\u003e\n\u003cli\u003eStainless-steel end caps\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"60' \/ Black \/ Black","offer_id":51555420274934,"sku":"APL693019-V1","price":814.99,"currency_code":"USD","in_stock":true},{"title":"80' \/ Black \/ Black","offer_id":51555420307702,"sku":"APL693019-V2","price":999.99,"currency_code":"USD","in_stock":true},{"title":"80' \/ Arctic White \/ Arctic White","offer_id":51555420340470,"sku":"APL693019-V3","price":1052.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327894_apl693019.webp?v=1787857166"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/f35c614c-bb09-491e-b28a-bf35b19a5253.webp?v=1790829003","url":"https:\/\/www.apollolighting.com\/collections\/cat-semi-rigid-rub-rail.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}