{"title":"Sonar","description":"","products":[{"product_id":"apl472379","title":"Forespar Marelon Full-Flow Seacock \u0026 1-1\/4\" Mushroom Through-Hull 904045ABYC","description":"\u003cp\u003e\u003cstrong\u003eMarelon Full-Flow Seacock \u0026amp; 1-1\/4\" Mushroom Through-Hull\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis integrated 2-part system comes complete with a Marelon® valve and properly matched mushroom head thru-hull with super strong “buttress” type threading. This new package is designed to eliminate valve and thru-hull thread style mismatches and associated cross-threading for after market installations common when customers select individual parts from bins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSystem Includes Full Flow Seacock With Integrated Hose Connector and Mushroom Thru Hull\u003c\/li\u003e\n\u003cli\u003eExceeds ABYC. H-27 Standards - UL Approved\u003c\/li\u003e\n\u003cli\u003eFor Use Above or Below Waterline\u003c\/li\u003e\n\u003cli\u003eNever Corrodes - Exclusive Polymer Formulation\u003c\/li\u003e\n\u003cli\u003eIncludes Emergency Handle Cap Thru-Hull Plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forespar Performance Products","offers":[{"title":"Default Title","offer_id":51550278090998,"sku":"APL472379","price":184.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1106932_apl472379jpg.jpg?v=1787789550"},{"product_id":"apl711492","title":"Garmin B164-12 Bronze Thru-Hull Transducer, 12° Tilt, 1kW, 50\/200 kHz, Depth\/Temp, 6-Pin Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11010-01 is a 1 kW through-hull, tilted-element transducer with a 6-pin connector for traditional 50\/200 kHz sonar and built-in depth and water-temperature sensing. It’s a low-profile bronze unit that sits nearly flush, with the housing extending less than 6.35 mm (0.25 in) below the hull.\u003c\/p\u003e\u003cp\u003eThis 12° tilted version is meant to match hull deadrise angles from 8° to 15° so the sonar beam points straight down without a fairing block. It installs through a 95 mm (3-3\/4 in) hole, uses a 71 mm (2.80 in) usable shaft length, and comes with a 39 ft cable for reaching the sounder location on many center consoles and offshore fishing boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 kW dual-frequency sonar element (50\/200 kHz) for a wide low-frequency view and a tighter high-frequency beam\u003c\/li\u003e\n\u003cli\u003eFixed 12° tilted element for 8° to 15° hull deadrise angles\u003c\/li\u003e\n\u003cli\u003eLow-profile bronze through-hull housing that extends less than 6.35 mm (0.25 in) below the hull\u003c\/li\u003e\n\u003cli\u003eDepth and fast-response water-temperature sensing in one transducer\u003c\/li\u003e\n\u003cli\u003e6-pin connector with a 39 ft cable for direct connection to compatible Garmin sonar ports\u003c\/li\u003e\n\u003cli\u003eRequires a 95 mm (3-3\/4 in) through-hull hole; non-retractable housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is the bronze housing version listed for fiberglass or wood hulls. The 12° tilt is the key fit item: it’s intended for boats with an 8° to 15° deadrise where you want the transducer face angled internally rather than relying on an external fairing.\u003c\/p\u003e\u003cp\u003eOn the electronics side, match it to a sounder that supports 50\/200 kHz and can drive a 1 kW transducer, with a transducer port that accepts the Garmin 6-pin connection.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location for clean water flow at speed and enough interior clearance to access the retaining nut and cable routing. A 95 mm (3-3\/4 in) hole is a large cutout, so many installs are handled during haul-out with careful measuring, proper bedding, and attention to corrosion control for a bronze fitting in a saltwater environment.\u003c\/p\u003e\u003cp\u003eOnce installed, route the 39 ft cable away from ignition wiring and high-current runs where practical, then secure it so it cannot chafe in bilges or rigging tubes. After the first few trips, recheck the inside nut area and the seal for any sign of weeping.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style of low-profile, no-fairing through-hull is a common pick for fast, trailered fishing boats that need a 1 kW transducer without leaving a tall housing exposed under the hull. It’s also a good fit when you want traditional 50 kHz for depth holding and 200 kHz for clearer target detail while working structure, reefs, and bait schools.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the outside face clear of heavy growth, which can soften returns and temperature response. If antifouling is used near the transducer, use products and prep methods that are appropriate for transducers so the acoustic window is not compromised.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550286807286,"sku":"APL711492","price":1275.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694094_apl711492_jpeg.jpg?v=1787789779"},{"product_id":"apl526536","title":"HawkEye FishTrax™ Transom Mount Transducer ACC-FF-1581","description":"\u003cp\u003e\u003cstrong\u003eFishTrax™ Transom Mount Transducer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe FishTrax transom mount transducer allows high-speed, on-plane operation of all FishTrax fish finders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFishTrax™ 1, FishTrax™ 1X and FishTrax™ 1C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTransom mount transducer w\/30' cable\u003c\/li\u003e\n\u003cli\u003eTransom mount bracket w\/mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Sold as an Individual\u003c\/p\u003e","brand":"HawkEye","offers":[{"title":"Default Title","offer_id":51550297358582,"sku":"APL526536","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109655_apl526536jpg.jpg?v=1787790176"},{"product_id":"apl635148","title":"Lowrance - PDRT-WSU 83\/200 kHz Pod Style Transducer, Remote Temperature","description":"\u003ch4\u003eDive Deeper Into Exploration: Unveil The Abyss\u003c\/h4\u003e\n\u003cp\u003eOur exquisite shoot-thru-hull mount is a maestro of maritime exploration designed to plunge into the unknown and escort you through the veiled mysteries beneath the hull. With a 20-degree pod type design backed by a remote temperature monitoring feature operating at 200 kHz, your voyage beneath the waves is about to become a saga of endless discoveries. Included in this maritime gem is a power cable extending 20 feet, ensuring a constant lifeline to the mysteries you unravel. Whether a veteran mariner or a novice sailor, this marine product is about to chart a new course in your nautical adventures.\u003c\/p\u003e\n\u003ch4\u003eTechnical Tidbits: Harnessing The Ocean’s Whisper\u003c\/h4\u003e\n\u003cp\u003eEquipped with a robust 200 kHz frequency capability, the shoot-thru-hull mount ensures crisp and clear feedback from the depths below. The 20-degree pod type configuration is a thoughtful design allowing for an expansive exploratory reach into the enigmatic marine world. The added feature of remote temperature monitoring is your conduit to understanding the conditions of the underwater realms you traverse.\u003c\/p\u003e\n\u003ch4\u003eProduct Dimensions: Your Compact Companion to the Deep\u003c\/h4\u003e\n\u003cp\u003eWe understand the essence of space on every vessel which is why our shoot-thru-hull mount is designed to be a compact yet powerful asset to your maritime explorations. Details on dimensions will guide you on how seamlessly it will integrate into your vessel, becoming an extension of your pursuit towards unlocking the ocean’s enigmas.\u003c\/p\u003e\n\u003ch4\u003eElectric Echoes: Color Temperature Dive\u003c\/h4\u003e\n\u003cp\u003eWhile not applicable in the technical sense, the metaphorical color temperature of your underwater exploration is about to get warmer with every depth the shoot-thru-hull mount reaches. The juxtaposition of technology and nature's colors is where the true adventure begins.\u003c\/p\u003e\n\u003ch4\u003eFinishes: The Final Touch of Maritime Mastery\u003c\/h4\u003e\n\u003cp\u003eOur shoot-thru-hull mount is not just a piece of technology, it's a piece of art. The finishes are meticulously crafted to endure the salty sprays and the raging waves while retaining its aesthetic allure. Embrace the blend of functionality and style as you sail towards the heart of the ocean.\u003c\/p\u003e\n\u003ch4\u003eHighlights: A Voyage of Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful 200 kHz Frequency\u003c\/li\u003e\n\u003cli\u003e20-degree Pod Type Design\u003c\/li\u003e\n\u003cli\u003eRemote Temperature Monitoring\u003c\/li\u003e\n\u003cli\u003e20 Feet Power Cable Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550305222902,"sku":"APL635148","price":82.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697385_apl635148_jpeg.jpg?v=1787790370"},{"product_id":"apl507569","title":"Raymarine RVX1000 3D CHIRP Sonar Module, 1kW CHIRP, RealVision 3D","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E70511 is the RVX1000 3D CHIRP black box sonar module for adding advanced fishfinding and bottom-imaging capability to a Raymarine multifunction display system. It combines RealVision 3D, CHIRP SideVision, CHIRP DownVision, high-frequency CHIRP, and up to 1 kW RMS CHIRP sonar output in one remotely mounted module, giving anglers and cruisers a wider view of fish, structure, bottom shape, and deeper water targets.\u003c\/p\u003e\u003cp\u003eThis module works on 12 V DC and 24 V DC vessel systems, with an operating voltage range of 10.8 V DC to 31.2 V DC and 10.4 W power consumption. The enclosure is rated IPX6 and IPX7, so it is suitable for protected marine mounting areas where spray, washdown moisture, vibration, and changing temperatures are part of normal boat use.\u003c\/p\u003e\u003cp\u003eWith a 1 kW transducer in suitable conditions, the RVX1000 supports depth readings up to 1,524 m or 5,000 ft. It also gives Raymarine eS and gS Series displays a strong sonar upgrade path, while pairing naturally with Axiom and Axiom Pro displays running compatible LightHouse software.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFive sonar channels in one black box module: RealVision 3D, CHIRP SideVision, CHIRP DownVision, high-frequency CHIRP, and 1 kW CHIRP sonar.\u003c\/li\u003e\n\u003cli\u003eUp to 1 kW RMS sonar output for offshore fishing and deeper sounding when used with a compatible 1 kW transducer.\u003c\/li\u003e\n\u003cli\u003eDepth capability up to 1,524 m or 5,000 ft in optimum conditions with a 1 kW transducer.\u003c\/li\u003e\n\u003cli\u003eRayNet network connection for integration with compatible Raymarine multifunction displays.\u003c\/li\u003e\n\u003cli\u003eTwo transducer connections, including a RealVision port and an 11-pin 1 kW transducer port.\u003c\/li\u003e\n\u003cli\u003eIPX6 and IPX7 water ingress rating for marine installation areas exposed to spray and washdown moisture.\u003c\/li\u003e\n\u003cli\u003e10.8 V DC to 31.2 V DC operating range for use on 12 V and 24 V electrical systems.\u003c\/li\u003e\n\u003cli\u003eSonar Scroll Back lets the operator pause, rewind, and review up to 10 minutes of sonar history before placing waypoints.\u003c\/li\u003e\n\u003cli\u003eTruZoom magnification helps show target detail without reducing image resolution.\u003c\/li\u003e\n\u003cli\u003eCompact black box format measures 299.4 mm wide, 188.0 mm high, and 84.4 mm deep for concealed mounting near power, network, and transducer cable runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe RVX1000 is built for Raymarine systems using compatible Axiom, Axiom Pro, eS Series, and gS Series multifunction displays. It is a practical upgrade for boats that already have a Raymarine helm network and need more sonar capability without replacing the entire display setup.\u003c\/p\u003e\u003cp\u003eTransducer selection matters with this module. RealVision transducers can connect to the 25-pin RealVision port, while compatible 1 kW CHIRP transducers connect through the 11-pin port. Some CPT-S, DownVision, and Airmar transducers require Raymarine adapter cables, so the transducer model and connector style should be checked before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe black box should be mounted in a dry, serviceable location with room for cable bends, ventilation, and access to the power, RayNet, and transducer connections. Good locations often include the electronics cabinet, helm console interior, or a protected equipment locker rather than an exposed deck area.\u003c\/p\u003e\u003cp\u003eThe unit uses a 5 A fuse and draws 2.4 A peak or 1.2 A RMS. Power wiring should follow normal marine electrical practice, with secure strain relief and routing that keeps sonar and network cables away from sources of interference where possible.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module is a good match for fishing boats and cruising boats that need clear structure views inshore and deeper sounding offshore. RealVision 3D, SideVision, and DownVision help when working reefs, ledges, wrecks, drop-offs, and channels, while the 1 kW CHIRP channel supports deeper water searching with the right transducer.\u003c\/p\u003e\u003cp\u003eIt also suits refits where the boat already has a compatible Raymarine display but needs modern sonar processing in a separate module. The dedicated processor helps run multiple sonar channels at the same time, which is useful when the skipper wants chart, sonar, and fishfinding views active during a run.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRVX1000 sonar module\u003c\/li\u003e\n\u003cli\u003e1.5 m power cable\u003c\/li\u003e\n\u003cli\u003e2 m RayNet female-to-female network cable\u003c\/li\u003e\n\u003cli\u003eNo. 8 fixing screws, quantity 4\u003c\/li\u003e\n\u003cli\u003eDocumentation pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":51550307713270,"sku":"APL507569","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0835807_apl507569.jpg?v=1787790483"},{"product_id":"apl122434","title":"Taylormade Boatguard 21'-23' V-Hull Runab (70192)","description":"\u003cp dir=\"ltr\"\u003eThe boat guard is the quickest and most convenient way to protect your pontoon boat. It provides complete protection for your boat and outperforms any other cover. It is a manually operated system and simply pulls the handle down and you'll be on your way in no time! Hot Shot fabric, acrylic-coated gray polyester fabric that is lightweight, water repellent, and strong enough to be trailered, is used to make boat guard covers. It has double folded hems, one wide tie-down loop, four-ply folded seams, and a shock cord in the hem.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt covers the inside and outside of your boat, everything from the floor up, including the outside fencing and graphics.\u003c\/li\u003e\n\u003cli\u003eProvides superior protection to your boat\u003c\/li\u003e\n\u003cli\u003eStrong enough to be trailered and tough enough to withstand the rigors of the road\u003c\/li\u003e\n\u003cli\u003eSizes to fit the majority of models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Taylor Made\u003c\/li\u003e\n\u003cli\u003eSKU: 811-70192\u003c\/li\u003e\n\u003cli\u003eWeight: 14.91 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taylor Made","offers":[{"title":"Default Title","offer_id":51550317740278,"sku":"APL122434","price":251.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1098390_apl122434jpg.jpg?v=1787790747"},{"product_id":"apl415924","title":"Furuno - B60-12, 12 Degree Tilted Element Transducer (10-Pin)","description":"\u003ch4\u003eDive Deeper: B60 Tilted Element® Overview\u003c\/h4\u003e\n\u003cp\u003eDiscover the power and precision of the B60 Tilted Element® 12°. Specially crafted for vessels with 8° - 15° deadrise angles, this innovative design ensures optimal performance below the waves. With its near-flush housing, it promises minimal drag while delivering clear and accurate depth readings.\u003c\/p\u003e\n\u003ch4\u003eKey Technical Insights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDepth and Temperature capabilities\u003c\/li\u003e\n\u003cli\u003eOperates at 50\/200 kHz\u003c\/li\u003e\n\u003cli\u003eDelivers 600w RMS\u003c\/li\u003e\n\u003cli\u003eMid-performance category\u003c\/li\u003e\n\u003cli\u003eRobust bronze construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSeamless Design Dimensions\u003c\/h4\u003e\n\u003cp\u003eThe design of the B60 ensures a nearly flush fit with only 5 mm (3\/16\") extending outside of the hull, minimizing drag and maintaining the aesthetics of your vessel.\u003c\/p\u003e\n\u003ch4\u003eThe Perfect Finish: Made of Bronze\u003c\/h4\u003e\n\u003cp\u003eOur B60 Tilted Element® isn't just technically advanced; it's constructed with high-quality bronze, promising durability and longevity.\u003c\/p\u003e\n\u003ch4\u003eKey Highlights At A Glance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for specific deadrise angles: 8° - 15°\u003c\/li\u003e\n\u003cli\u003eBuilt-in deadrise compensation with a tilted ceramic element\u003c\/li\u003e\n\u003cli\u003eVertical beam for accurate depth readings\u003c\/li\u003e\n\u003cli\u003eMinimal drag with its near-flush design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550336123126,"sku":"APL415924","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697086_apl415924_jpeg.jpg?v=1787791301"},{"product_id":"apl801653","title":"Echonautics - 600w 130-210kHz High CHIRP Tilted Element Bronze TH Transducers","description":"\u003ch4\u003eHigh-Performance Low-Profile Thru-Hull CHIRP Transducer\u003c\/h4\u003e\u003cp\u003eThe Echonautics BT70H600 is a state-of-the-art high CHIRP transducer designed for superior depth and temperature readings. Engineered for marine applications, this transducer provides exceptional performance with minimal drag, making it ideal for high-speed vessels. Its low-profile thru-hull design ensures optimal water flow while maintaining accurate and reliable readings. With a frequency range of 130-210kHz and a power output of 600 watts, it delivers enhanced target separation and depth penetration, making it an excellent choice for serious anglers and commercial marine operators.\u003c\/p\u003e\u003ch4\u003eAdvanced CHIRP Technology for Precision Readings\u003c\/h4\u003e\u003cp\u003eEquipped with high CHIRP technology, the BT70H600 transducer operates within a broad frequency range, allowing for superior target resolution and depth detection. The CHIRP system enables enhanced bottom tracking and detailed imaging, providing a clear and accurate representation of underwater structures and marine life.\u003c\/p\u003e\u003ch4\u003eDurable Bronze Construction for Marine Environments\u003c\/h4\u003e\u003cp\u003eBuilt with a robust bronze housing, the BT70H600 is designed to withstand harsh marine conditions. Its durable construction ensures long-lasting performance, even in challenging saltwater environments. The acoustic window, made from urethane, enhances signal transmission for more precise depth readings.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Depth and Temperature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e CHIRP 130-210kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Style:\u003c\/strong\u003e Thru-Hull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt\/Deadrise:\u003c\/strong\u003e 0° Tilted Element; Suitable for 0° to 7° Hull Deadrise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Bronze\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Power:\u003c\/strong\u003e 600 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter:\u003c\/strong\u003e 2.38 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 27 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Sensor:\u003c\/strong\u003e NTC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Window:\u003c\/strong\u003e Urethane\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Variations\u003c\/h4\u003e\u003cp\u003eThe BT70H600 transducer is available in multiple tilt angles to match various hull designs, ensuring optimal performance:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBT70H600-00:\u003c\/strong\u003e 0° Tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBT70H600-12:\u003c\/strong\u003e 12° Tilt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBT70H600-18:\u003c\/strong\u003e 18° Tilt\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEach variation is designed to accommodate different hull deadrise angles, allowing for precise installation and accurate sonar readings.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLow-profile thru-hull design minimizes drag and maximizes performance at high speeds\u003c\/li\u003e\n\u003cli\u003eCHIRP technology for enhanced depth and target resolution\u003c\/li\u003e\n\u003cli\u003eSturdy bronze construction for durability in marine environments\u003c\/li\u003e\n\u003cli\u003eWide frequency range for superior underwater imaging\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple tilt variations for customized installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdeal for both professional and recreational marine applications, the Echonautics BT70H600 transducer delivers high-precision sonar performance in a rugged and reliable package.\u003c\/p\u003e","brand":"Echonautics","offers":[{"title":"18°","offer_id":51550345363702,"sku":"APL801653-351","price":679.0,"currency_code":"USD","in_stock":true},{"title":"0°","offer_id":51550345396470,"sku":"APL801653-746","price":679.0,"currency_code":"USD","in_stock":true},{"title":"12°","offer_id":51550345429238,"sku":"APL801653-056","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0839341_apl162504.jpg?v=1787791641"},{"product_id":"apl975330","title":"Airmar PM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket\/Keel Mount - No Connector PM111C-LHW","description":"\u003cp\u003e\u003cstrong\u003ePM111 LHW CHIRP 2kW Wide-Beam Chirp-Ready Pocket\/Keel Mount - No Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGet more coverage under your boat with Airmar’s unique wide-beam, high-frequency, Chirp-ready transducer. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high-frequency band results in superior resolution. The constantly wide beam provides twice the coverage and excellent fish arches on the display compared to most high-frequency, narrow-beam transducer options.\u003c\/p\u003e\n\u003cp\u003eThe high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essentially down to 152 m (500').\u003c\/p\u003e\n\u003cp\u003eThe low-frequency band and 2 kW of power also support great deep-water performance. Get the best of both worlds with Airmar’s dual-frequency, Chirp-ready transducer with wide-beam coverage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe depth and fast-response water-temperature sensor\u003c\/li\u003e\n\u003cli\u003e2 kW of power for great deep-water performance from the low frequency\u003c\/li\u003e\n\u003cli\u003e2 kW low frequency: 38 to 75 kHz\n\u003cul\u003e\n\u003cli\u003e19° to 10° port-starboard beamwidth\u003c\/li\u003e\n\u003cli\u003e10° to 5° fore-aft beamwidth\u003c\/li\u003e\n\u003cli\u003eMaximum depth of 1,829 m (6,000')\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 kW high frequency: 150 to 250 kHz\n\u003cul\u003e\n\u003cli\u003e25° constant beamwidth\u003c\/li\u003e\n\u003cli\u003eMaximum depth of 152 m (500')\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e137 kHz of total bandwidth from one transducer\u003c\/li\u003e\n\u003cli\u003eCovers popular fishing frequencies of 50, 68, and 200 kHz plus everything else in the bandwidth\u003c\/li\u003e\n\u003cli\u003eHigh frequency delivers superior shallow-water performance, bottom detail, and fish-target separation\u003c\/li\u003e\n\u003cli\u003eHigh wide beamwidth yields more coverage for detecting fish in the upper-water column\u003c\/li\u003e\n\u003cli\u003eUrethane housing designed for custom mounting in a cavity\u003c\/li\u003e\n\u003cli\u003eAlso available in an external (R109LHW) mount\u003c\/li\u003e\n\u003cli\u003eExclusive Xducer ID® technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 13.6 kg (30 lb.)\u003c\/li\u003e\n\u003cli\u003eRecommended Boat Length: 12 m (40') and above\u003c\/li\u003e\n\u003cli\u003eHull Material: Solid fiberglass only\u003c\/li\u003e\n\u003cli\u003eHull Deadrise: Accommodates any deadrise angle based on custom cavity construction\u003c\/li\u003e\n\u003cli\u003eAcoustic Window: Epoxy\/urethane\u003c\/li\u003e\n\u003cli\u003eTransducer Element: 16 internal broadband ceramic assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":51550351917302,"sku":"APL975330","price":4261.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1111531_apl646525jpg.jpg?v=1787791881"},{"product_id":"apl426197","title":"Garmin M265LH In-Hull CHIRP Transducer, Depth Only, 1 kW, 12-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12380-20 is a 1 kW in-hull CHIRP transducer for depth readings, built around a plastic housing and a 12-pin connection for compatible Garmin sonar inputs.\u003c\/p\u003e\u003cp\u003eIt runs CHIRP Low from 42 to 65 kHz and CHIRP High from 130 to 210 kHz, with beamwidths of 16° to 25° (low) and 6° to 10° (high). It is rated for depths up to 3,000 ft, and the attached cable is 39 ft long, which is usually enough to reach the helm on mid-size to larger boats without extensions.\u003c\/p\u003e\u003cp\u003eThis is an in-hull installation that shoots through fiberglass, so the outside of the hull stays smooth and there is no below-the-waterline fitting. It is not recommended for cored-hull vessels, and it needs a solid fiberglass section where the mounting tank can be bonded and kept liquid-tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 kW dual-band CHIRP operation: 42 to 65 kHz (low) and 130 to 210 kHz (high)\u003c\/li\u003e\n\u003cli\u003eNarrow beam coverage for detail: 16° to 25° (low) and 6° to 10° (high)\u003c\/li\u003e\n\u003cli\u003eIn-hull mounting using a liquid-filled tank, keeping the transducer protected inside the boat and leaving the hull exterior untouched\u003c\/li\u003e\n\u003cli\u003eSupported deadrise range of 0° to 30° when the tank is cut to match the hull angle\u003c\/li\u003e\n\u003cli\u003eDepth-only transducer (no speed and no water temperature sensing)\u003c\/li\u003e\n\u003cli\u003eGarmin 12-pin connector with a 39 ft cable for compatible Garmin chartplotters and sonar modules\u003c\/li\u003e\n\u003cli\u003eNot recommended for cored-hull vessels; performs best over solid fiberglass with a well-chosen mounting spot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003ePlan for an accessible, solid fiberglass location inside the hull, commonly in the bilge area, where the surface can be cleaned and prepared for bonding the tank. Avoid spots over coring, voids, stringers, fuel tanks, or areas that trap air, since air and core material can weaken returns or make the bottom reading unstable.\u003c\/p\u003e\u003cp\u003eThe 12-pin plug is intended for Garmin sonar ports that accept 12-pin transducers. If your system uses a different connector style or a black box with a different input, verify connector compatibility before installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLocation matters more with in-hull mounts than with through-hull transducers. A practical approach is to test the transducer at the chosen spot while afloat and compare it to a baseline reading with the transducer over the side, then commit to bonding once you see a steady depth number and a strong bottom trace.\u003c\/p\u003e\u003cp\u003eThe mounting tank is cut to match the hull deadrise so the beam points straight down, then bonded to a smooth, clean section of hull. After curing, the tank is filled with propylene glycol and the transducer is secured in place with its O-ring gasket. Keep the tank in a cool, ventilated area and route the cable away from engine harnesses and high-current wiring to reduce electrical noise.\u003c\/p\u003e\u003cp\u003eIf the unit is supplied with a factory connector, do not cut it off for routing. Coil and secure any extra cable so it cannot chafe in the bilge.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup is a strong fit for boats kept on a trailer or lift, and for owners who want capable CHIRP depth performance without a through-hull fitting. It also suits offshore runs and deep-water fishing where bottom tracking matters, provided the hull and mounting location support a clean sonar path.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the tank seal and verify the fill level stays above the hull contact area, especially after seasonal temperature swings or heavy pounding. Keeping the bilge clean and the cable properly supported helps maintain consistent readings over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550361026806,"sku":"APL426197","price":1814.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697247_apl426197_jpeg.jpg?v=1787792022"},{"product_id":"apl100855","title":"Garmin B75 Thru-Hull Transducer, CHIRP, 600W, 8-Pin, Bronze Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin B75 is a bronze, low-profile thru-hull CHIRP transducer family with a 600 W rating, depth sensing, and fast-response water-temperature sensing. It is offered in Mid-CHIRP (80 to 130 kHz) or High CHIRP (130 to 210 kHz) to match the water you run and the type of targets you want to separate.\u003c\/p\u003e\u003cp\u003eMid-CHIRP versions cover 80 to 130 kHz with a 24° to 16° beamwidth and are rated to a maximum depth of 274 m (900 ft). High CHIRP versions cover 130 to 210 kHz with a 15° to 9° beamwidth and are rated to a maximum depth of 214 m (700 ft). Installation is a true thru-hull that uses a 70 mm (2-13\/16\") hole, with a 95 mm (3.75\") usable shaft length.\u003c\/p\u003e\u003cp\u003eThe internal tilt element is fixed at 0°, 12°, or 20° so the sonar beam points straight down when the unit is mounted close to flush. Match the tilt to the hull deadrise at the install location: 0° for 0° to 7°, 12° for 6° to 15°, and 20° for 16° to 24°. The bronze housing is intended for fiberglass or wood hulls and is commonly used on stepped, planing, or displacement hull forms.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e600 W single-band CHIRP transducer with depth and fast-response water-temperature sensing\u003c\/li\u003e\n\u003cli\u003eMid-CHIRP option: 80 to 130 kHz with 24° to 16° beamwidth\u003c\/li\u003e\n\u003cli\u003eHigh CHIRP option: 130 to 210 kHz with 15° to 9° beamwidth\u003c\/li\u003e\n\u003cli\u003eFixed internal tilt options (0°, 12°, 20°) to match hull deadrise without adding a fairing block\u003c\/li\u003e\n\u003cli\u003eThru-hull mounting with 70 mm (2-13\/16\") hole size and 95 mm (3.75\") usable shaft length\u003c\/li\u003e\n\u003cli\u003eBronze housing for fiberglass or wood hulls, with a low-profile shape that sits close to flush when installed correctly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations to match both hull deadrise and sonar band.\u003c\/p\u003e\u003cp\u003eThe differences across the range are the fixed tilt angle (0°, 12°, or 20°) and the CHIRP frequency band (Mid-CHIRP or High CHIRP).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-11636-20: Tilt 0° and CHIRP Frequency Mid-CHIRP. A 0° tilt matches flatter mounting areas (0° to 7° deadrise) while keeping the beam pointed down.\u003c\/li\u003e\n\u003cli\u003e010-11636-21: Tilt 12° and CHIRP Frequency Mid-CHIRP. A 12° tilt aligns with moderate deadrise sections (6° to 15°) so the transducer can sit close to flush.\u003c\/li\u003e\n\u003cli\u003e010-11636-22: Tilt 20° and CHIRP Frequency Mid-CHIRP. A 20° tilt matches higher deadrise areas (16° to 24°) where a straight 0° element would aim the beam off to the side.\u003c\/li\u003e\n\u003cli\u003e010-11634-21: Tilt 12° and CHIRP Frequency High CHIRP. High CHIRP uses a narrower beam, which helps when you want tighter target separation in shallower water.\u003c\/li\u003e\n\u003cli\u003e010-11634-22: Tilt 20° and CHIRP Frequency High CHIRP. This combines the higher-deadrise tilt range (16° to 24°) with the High CHIRP band for detailed returns in shallower water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is a thru-hull install, plan on drilling a 70 mm (2-13\/16\") hole and having clear access inside the hull for the nut and cable routing. Pick a location that stays in clean water at speed and is clear of turbulence sources like strakes, steps, and intakes. A close-to-flush install helps keep drag down and protects the transducer from impact.\u003c\/p\u003e\u003ch6\u003eSonar and system integration\u003c\/h6\u003e\u003cp\u003eVerify that your sonar source supports the band you are selecting (Mid-CHIRP vs High CHIRP) and that the connector and port type match your system before you commit to cable routing. Once connected, you will get depth plus water-temperature data from the built-in sensor.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eMid-CHIRP is a solid fit for boats that split time between shallow and mid-depth water and still want meaningful bottom detail. High CHIRP is a better match when you spend more time in shallower water and care about separating targets near structure.\u003c\/p\u003e\u003cp\u003eThis transducer family makes sense for fiberglass and wood-hull boats where you want a low-profile thru-hull installation and you can choose a fixed tilt that matches the deadrise at the mounting spot.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"12° \/ Mid-CHIRP","offer_id":51550361059574,"sku":"APL100855-V2","price":879.99,"currency_code":"USD","in_stock":true},{"title":"0° \/ Mid-CHIRP","offer_id":51550361092342,"sku":"APL100855-V1","price":879.99,"currency_code":"USD","in_stock":true},{"title":"12° \/ High CHIRP","offer_id":51550361125110,"sku":"APL100855-V4","price":929.99,"currency_code":"USD","in_stock":true},{"title":"20° \/ Mid-CHIRP","offer_id":51550361157878,"sku":"APL100855-V3","price":879.99,"currency_code":"USD","in_stock":false},{"title":"20° \/ High CHIRP","offer_id":51550361190646,"sku":"APL100855-V5","price":929.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1266571_apl100855_jpeg.jpg?v=1787792023"},{"product_id":"apl024912","title":"Garmin ClearVü\/SideVü Sonar Transducer, CHIRP Traditional, 12-Pin, Temp Sensor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Garmin all-in-one scanning sonar transducer combines traditional CHIRP with ClearVü and SideVü in one housing, with configurations that cover High Wide CHIRP (150 to 240 kHz) plus scanning frequency sets such as 455\/800 kHz, 455\/1200 kHz, or 455\/800\/1000 kHz.\u003c\/p\u003e\u003cp\u003eAll versions use a 12-pin connection to a compatible Garmin sonar-capable display or black box, and the mounting style is selected at purchase: transom mount options for typical outboard and I\/O boats, or thru-hull options when you want the element installed through the hull. Cable length depends on the configuration (commonly 20 ft or 25 ft), so it is worth checking your run from the transducer to the helm before you drill.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one sonar types in a single transducer: traditional CHIRP plus ClearVü and SideVü scanning\u003c\/li\u003e\n\u003cli\u003eHigh Wide CHIRP traditional sonar range: 150 to 240 kHz\u003c\/li\u003e\n\u003cli\u003eScanning frequency choices depend on configuration: ClearVü 455\/800 kHz or ClearVü UHD 800 kHz, and SideVü 455\/800 kHz, SideVü 455\/1200 kHz, or 455\/800\/1000 kHz\u003c\/li\u003e\n\u003cli\u003e12-pin connector for Garmin sonar-capable units that support ClearVü and SideVü\u003c\/li\u003e\n\u003cli\u003eMounting options across the range: transom mount, single thru-hull, and a thru-hull pair option\u003c\/li\u003e\n\u003cli\u003eCable length varies by configuration (20 ft or 25 ft common) to better match different helm runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis listing covers multiple Garmin all-in-one transducer configurations that share the same core sonar types but differ in mounting method and scanning frequency coverage.\u003c\/p\u003e\u003cp\u003eThe main variables are installation (transom mount vs thru-hull) and the ClearVü and SideVü frequency sets listed below. In practice, higher scanning frequencies are used when you want tighter detail on structure, while 455 kHz is used when you need more reach to the sides.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-12909-00: Transom mount; ClearVü UHD 800 kHz; SideVü 455\/1200 kHz. Includes a higher-frequency SideVü option for tight structure detail and a 455 kHz setting when you want to scan farther out.\u003c\/li\u003e\n\u003cli\u003e010-12405-00: Transom mount; ClearVü 455\/800 kHz; SideVü 455\/800 kHz. A straightforward two-frequency setup that lets you switch between more detail (800 kHz) and more coverage (455 kHz).\u003c\/li\u003e\n\u003cli\u003e010-13073-00: Transom mount; ClearVü 455\/800\/1000 kHz; SideVü 455\/800\/1000 kHz. Adds a 1000 kHz option that gives another look for balancing detail and coverage in the scanning views.\u003c\/li\u003e\n\u003cli\u003e010-02732-10: Thru-hull mount; ClearVü 455\/800\/1000 kHz; SideVü 455\/800\/1000 kHz. A thru-hull install keeps the transducer off the transom and is selected when a through-the-hull mounting approach fits the boat better.\u003c\/li\u003e\n\u003cli\u003e010-02732-11: Thru-Hull Pair; ClearVü 455\/800\/1000 kHz; SideVü 455\/800\/1000 kHz. Supplied as a matched thru-hull pair for installations that use two through-hull elements rather than a single transducer body.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor transom-mount installs, place the transducer where it stays in solid water and is protected from bunks and rollers when trailering. Set the bracket so the transducer face runs level at speed, then secure and clamp the cable so it cannot chafe on the transom, splashwell, or rigging tube.\u003c\/p\u003e\u003cp\u003eFor thru-hull installs, plan the location from inside first, confirm access and hull thickness, and bed the fitting properly for your hull material. Many owners leave below-the-waterline drilling and sealing to a yard if they are not already comfortable with thru-hull work.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm your Garmin display or sonar module has a 12-pin transducer connection and supports both ClearVü and SideVü. You will select the scanning frequencies that are available on the specific configuration you install.\u003c\/p\u003e\u003cp\u003eMatch the mounting style to your hull and how you use the boat. Transom mounts are common on outboard and sterndrive boats, while thru-hull options are typically chosen when a through-the-hull installation is preferred over a transom bracket.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers who work structure and want traditional sonar for bottom tracking plus scanning views that show what is off to the sides. It also fits coastal cruising boats that want a clearer picture around docks, pilings, and drop-offs without adding separate sonar elements.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"455\/800\/1000 kHz \/ Thru-hull mount \/ 455\/800\/1000 kHz","offer_id":51550362992886,"sku":"APL024912-V4","price":899.99,"currency_code":"USD","in_stock":true},{"title":"UHD 800 kHz \/ Transom mount \/ 455\/1200 kHz","offer_id":51550363025654,"sku":"APL024912-V1","price":499.99,"currency_code":"USD","in_stock":true},{"title":"455\/800\/1000 kHz \/ Thru-Hull Pair \/ 455\/800\/1000 kHz","offer_id":51550363058422,"sku":"APL024912-V5","price":1649.99,"currency_code":"USD","in_stock":true},{"title":"455\/800\/1000 kHz \/ Transom mount \/ 455\/800\/1000 kHz","offer_id":51550363091190,"sku":"APL024912-V3","price":599.99,"currency_code":"USD","in_stock":true},{"title":"455\/800 kHz \/ Transom mount \/ 455\/800 kHz","offer_id":51550363123958,"sku":"APL024912-V2","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1268293_apl024912_jpeg.jpg?v=1787814301"},{"product_id":"apl482084","title":"Humminbird - XPTH 14 HW MSI T Plastic Thru Hull Transducer","description":"\u003ch4\u003eUnleash the Power of the Ocean\u003c\/h4\u003e\u003cp\u003eUnlock unparalleled underwater clarity with the Humminbird XPTH 14 HW MSI T Plastic Thru-Hull Transducer. Engineered for marine enthusiasts, this transducer offers cutting-edge technology that brings the ocean's mysteries to your fingertips. Whether you're a seasoned mariner or a passionate angler, experience the profound benefits of advanced imaging and sonar capabilities, crafted to meet the rigorous demands of marine environments.\u003c\/p\u003e\u003ch4\u003eDive Deep into Innovation\u003c\/h4\u003e\u003cp\u003eThe XPTH 14 HW MSI T features state-of-the-art MEGA Imaging+ technology, delivering breathtakingly clear Side and Down Imaging at multiple frequencies. With support for 455 kHz, 800 kHz, and the groundbreaking MEGA Imaging+, you can explore depths up to 1,200 feet with precise, high-definition detail. The Dual Spectrum CHIRP sonar offers versatile frequency ranges, ensuring you never miss a moment beneath the waves. Built with a robust composite design, this transducer is designed to withstand the challenges of the marine environment, complete with a built-in temperature sensor for accurate readings.\u003c\/p\u003e\u003ch4\u003eKey Features at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Works seamlessly with Humminbird SOLIX series (10, 12, 15) CHIRP MEGA SI+ GPS G2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImaging Range\u003c\/strong\u003e: MEGA Side Imaging frequencies allow a side-to-side view up to 800 feet, while MEGA Down Imaging provides a depth view up to 400 feet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Versatility\u003c\/strong\u003e: Dual Spectrum CHIRP offers Full (150-220 kHz), Narrow (180-240 kHz), and Wide (140-200 kHz) ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability\u003c\/strong\u003e: Crafted with a rugged composite body, this transducer is built to last, even in the most demanding marine conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Comes with a 30-foot cable, ensuring ample reach and flexibility for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eExplore the Depths: Technical Excellence\u003c\/h4\u003e\u003cp\u003eExperience unparalleled detail with MEGA Imaging+, which offers up to three times the clarity of standard imaging. The dual-frequency capability ensures you have the right tools for any underwater exploration, whether you're navigating coastal waters or deep-sea fishing.\u003c\/p\u003e\u003ch4\u003eCrafted for the Sea: Built to Endure\u003c\/h4\u003e\u003cp\u003eThe transducer's durable construction ensures it stands up to the wear and tear of marine use. Its plastic thru-hull design is optimized for both longevity and performance, providing reliable data and imagery every time you venture out.\u003c\/p\u003e\u003ch4\u003eSized for Precision: Know Your Gear\u003c\/h4\u003e\u003cp\u003eDimensions matter, and the XPTH 14 HW MSI T is engineered to fit seamlessly into your vessel's setup. With dimensions of 8.4 inches in length, 2.3 inches in width, and 1 inch in depth, along with a stem length of 5 inches and a stem diameter of 1 inch, this transducer is designed for precision and ease of use.\u003c\/p\u003e\u003ch4\u003eA Choice of Frequencies: Versatile Imaging Options\u003c\/h4\u003e\u003cp\u003eChoose from 455 kHz, 800 kHz, or MEGA Imaging+ frequencies, depending on your specific needs and the environment. Each option offers unique benefits, from broader scanning ranges to more detailed imaging, making it easy to adapt to changing conditions and requirements.\u003c\/p\u003e\u003ch4\u003eYour Marine Adventure Awaits\u003c\/h4\u003e\u003cp\u003eEquip your boat with the Humminbird XPTH 14 HW MSI T Plastic Thru-Hull Transducer and navigate the waters with confidence. Whether exploring new fishing spots or simply enjoying the beauty beneath the surface, this transducer provides the clarity and reliability you need for a successful journey.\u003c\/p\u003e","brand":"Humminbird","offers":[{"title":"Default Title","offer_id":51550367547638,"sku":"APL482084","price":529.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0718431_apl482084.jpg?v=1787792237"},{"product_id":"apl713701","title":"Lowrance - HDI Skimmer Med\/High 83\/200\/455\/800 Transom Mount 9-Pin Transducer","description":"\u003ch4\u003eThe Ocean's Clairvoyant: Dive Deep with HDI SSkimmer Transducer\u003c\/h4\u003e\n\u003cp\u003eImagine a world where you can explore the hidden depths of the ocean like never before. With the HDI SSkimmer Transom Mount Transducer, that world becomes your reality. This state-of-the-art marine equipment is crafted with the perfect blend of advanced technology and robust design to give you unparalleled insights into the waters beneath your vessel.\u003c\/p\u003e\n\u003ch4\u003ePeek into the Abyss: Technical Insights\u003c\/h4\u003e\n\u003cp\u003eThe HDI SSkimmer integrates the prowess of the Hybrid Dual Imaging (HDI) technology, presenting the fusion of the Broadband Sounder and the exclusive DownScan Imaging. This combination equips you with a comprehensive view of what lies beneath, capturing both broad scenes and intricate details.\u003c\/p\u003e\n\u003cp\u003eThis transducer operates with multiple frequencies including 83\/200\/455\/800kHz, offering flexibility to cater to varying depths and resolutions. A built-in temperature sensor further enriches the data, ensuring you're always informed of the aquatic conditions.\u003c\/p\u003e\n\u003ch4\u003eDimensions that Define Excellence\u003c\/h4\u003e\n\u003cp\u003eWith an efficient cable length of 6 meters (20 feet), the HDI SSkimmer offers ample reach to connect and position as per your boating requirements.\u003c\/p\u003e\n\u003ch4\u003eEnthralling Highlights of the Deep Blue\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated Hybrid Dual Imaging (HDI) technology for a detailed view.\u003c\/li\u003e\n\u003cli\u003eMultiplicity of frequencies for diverse depth explorations.\u003c\/li\u003e\n\u003cli\u003eIncorporated temperature sensor for accurate aquatic readings.\u003c\/li\u003e\n\u003cli\u003eRobust 9-Pin Transom Mount design with a 6M (20') cable length.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550369186038,"sku":"APL713701","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697656_apl713701_jpeg.jpg?v=1787792282"},{"product_id":"apl577801","title":"GROCO Stainless Steel Hose Barb Thru-Hull Fitting - 1\" HTH-1000-S","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Hose Barb Thru-Hull Fitting - 1\" \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNPS Thread With Hose Connection\u003c\/li\u003e\n\u003cli\u003e#316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eUL Listed 647B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":51550371414262,"sku":"APL577801","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109113_apl577801jpg.jpg?v=1787792407"},{"product_id":"apl683267","title":"Maretron Pressure Transducer 0 to 1.5 PSI PT-0-1.5PSI-01","description":"\u003cb\u003ePressure Transducer 0 to 1.5 PSI\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor use with FPM100 Fluid Pressure Monitor\u003cbr\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":51550375903478,"sku":"APL683267","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1111979_apl683267jpg.jpg?v=1787792649"},{"product_id":"apl325760","title":"Raymarine CPT-70 Plastic Thru-Hull Transducer, For Dragonfly 4\/5\/7PRO and Wi-Fish, CHIRP, DownVision, Depth\/Temperature, Fairing Block","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine A80278 is a CPT-70 plastic thru-hull transducer for Raymarine Dragonfly sonar systems, combining CHIRP sonar, CHIRP DownVision, depth, and water temperature in one through-hull installation. It is made for boats where a fixed hull-mounted transducer is preferred over a transom mount, especially when clean sonar readings and a neat below-waterline installation matter.\u003c\/p\u003e\u003cp\u003eThe CPT-70 uses 2 CHIRP channels, with one traditional sonar channel and one DownVision channel. Its sonar beam is listed at 25° and 60°, with DownVision using a wide port-to-starboard fan beam and a thin fore-and-aft beam for structure imaging. Depth range is 0.6 m to 183 m, or 2 ft to 600 ft, with the sonar channel able to reach farther in some conditions.\u003c\/p\u003e\u003cp\u003eThe transducer has a urethane body, a 10 m cable, and a housing length of 210.8 mm with a maximum height of 131.8 mm. It carries IPx6 and IPx7 waterproof ratings and is specified for fiberglass, wood, and metal hulls.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThrough-hull CPT-70 transducer for second-generation Raymarine Dragonfly 4, Dragonfly 5, Dragonfly 7PRO, and Wi-Fish systems.\u003c\/li\u003e\n\u003cli\u003eCHIRP sonar and CHIRP DownVision give both fishfinder returns and structure-style imaging from the same hull fitting.\u003c\/li\u003e\n\u003cli\u003eRecords depth and water temperature, so one transducer can feed the core bottom-reading information used for fishing and navigation awareness.\u003c\/li\u003e\n\u003cli\u003eDepth range runs from 0.6 m to 183 m, or 2 ft to 600 ft, with additional fishfinder depth possible in suitable water conditions.\u003c\/li\u003e\n\u003cli\u003e25° and 60° beam widths, with DownVision coverage that is wide across the boat and narrow fore to aft.\u003c\/li\u003e\n\u003cli\u003eUrethane thru-hull body with IPx6 and IPx7 waterproof ratings for exposed marine installation below the waterline.\u003c\/li\u003e\n\u003cli\u003e10 m cable gives useful routing length from the hull location to the display or sonar connection point.\u003c\/li\u003e\n\u003cli\u003eSupplied dead rise block helps the installer set the transducer angle during thru-hull mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer is for Raymarine Dragonfly and Wi-Fish sonar setups, including second-generation Dragonfly 4, 5, and 7PRO units. Systems with a green locking collar require the A80332 adapter cable, so the existing display connector should be checked before installation.\u003c\/p\u003e\u003cp\u003eThe CPT-70 is specified for fiberglass, wood, and metal hull materials. Because it is a thru-hull transducer, the installation location should be chosen where the face of the transducer can stay in clean water flow and away from turbulence caused by strakes, intakes, steps, or the propeller stream.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eA thru-hull installation requires drilling the hull and bedding the fitting correctly, so it is a better match for permanent installations than quick seasonal swaps. The dead rise block and securing nut are included, allowing the transducer to be mounted through the hull with the face aligned for sonar coverage.\u003c\/p\u003e\u003cp\u003eOn trailer boats, fishing boats, and small cruisers using Dragonfly electronics, this style of mount keeps the transducer protected and avoids the exposed bracketry of a transom installation. Cable routing should allow a dry, supported path back to the display, with service slack left where the cable enters the electronics area.\u003c\/p\u003e\u003ch6\u003eSonar performance on board\u003c\/h6\u003e\u003cp\u003eThe traditional CHIRP sonar channel is the main channel for bottom tracking and fish targets, while CHIRP DownVision adds a more detailed view of structure, bottom shape, and objects beneath the boat. That combination is useful for anglers working reefs, ledges, wrecks, or inshore structure, and for cruisers who want a clear view of depth changes in familiar or unfamiliar water.\u003c\/p\u003e\u003cp\u003eActual depth performance depends on water conditions, bottom type, installation quality, and boat speed. A clean thru-hull position helps reduce aerated water across the transducer face, which is important when the display is being used while moving between marks or cruising grounds.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThru-hull plastic transducer\u003c\/li\u003e\n\u003cli\u003eDead rise block\u003c\/li\u003e\n\u003cli\u003ePlastic securing nut\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":51550378328310,"sku":"APL325760","price":284.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0835822_apl325760.jpg?v=1787792720"},{"product_id":"apl541680","title":"Airmar - SS175C-20-L 20d Tilt Low CHIRP Transducer","description":"\u003ch4\u003eAdvanced CHIRP Technology for Precision Fishing\u003c\/h4\u003e\u003cp\u003eThe Airmar SS175C-20-L 20d Tilt Low CHIRP Transducer is designed to provide superior depth and temperature readings with unmatched accuracy. This advanced transducer operates within a low CHIRP frequency range of 40 kHz to 75 kHz, offering an extensive 35 kHz bandwidth for highly detailed underwater imaging. Its steel housing ensures durability, making it ideal for vessels up to 8 meters (25 feet) with steel or aluminum hulls. With Airmar’s exclusive Xducer ID® technology, this transducer optimizes performance by automatically configuring to compatible sonar systems. Whether used for commercial fishing, charter operations, or competitive angling, it delivers precise bottom detection down to 3,000 meters (10,000 feet), distinguishing baitfish, game fish, and underwater structures with exceptional clarity.\u003c\/p\u003e\u003ch4\u003eOptimized Design for Enhanced Performance\u003c\/h4\u003e\u003cp\u003eThe SS175C-20-L is engineered with a nearly flush-mount installation, ensuring minimal drag and optimal signal reception. The built-in 20-degree tilt compensates for hull deadrise, keeping the ceramic element positioned correctly for maximum echo returns. This design allows for better target resolution, making it easier to detect fish in deep waters.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 40 kHz - 75 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeamwidth:\u003c\/strong\u003e 32° to 21°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBandwidth:\u003c\/strong\u003e 35 kHz total bandwidth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth Capability:\u003c\/strong\u003e Up to 3,000 m (10,000 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransducer Housing:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Compatibility:\u003c\/strong\u003e Steel or aluminum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusive Technology:\u003c\/strong\u003e Xducer ID® for automatic configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 kg (6 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Deadrise Compatibility:\u003c\/strong\u003e 16° to 24°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Window Material:\u003c\/strong\u003e Urethane\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh-performance CHIRP technology for superior underwater detail\u003c\/li\u003e\n\u003cli\u003eWide frequency range covering the popular 50 kHz fishing frequency\u003c\/li\u003e\n\u003cli\u003eTilted element design ensures optimal sonar performance\u003c\/li\u003e\n\u003cli\u003eDurable steel housing for long-lasting marine use\u003c\/li\u003e\n\u003cli\u003eIdeal for boats up to 8 meters (25 feet)\u003c\/li\u003e\n\u003cli\u003eNearly flush-mount installation reduces drag and enhances signal reception\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAvailable Variations\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-MM:\u003c\/strong\u003e Airmar 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-0:\u003c\/strong\u003e Bare Wire Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-12G:\u003c\/strong\u003e Garmin 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-14HB:\u003c\/strong\u003e Humminbird 14-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-11R:\u003c\/strong\u003e Raymarine 11-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-9N:\u003c\/strong\u003e Simrad 9-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-20-L-BB:\u003c\/strong\u003e Standard Horizon 9-Pin Connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned for serious anglers and marine professionals, the Airmar SS175C-20-L ensures high-precision depth detection and optimal performance in all fishing conditions.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Humminbird 14-Pin","offer_id":51550379213046,"sku":"APL541680-0","price":1899.99,"currency_code":"USD","in_stock":false},{"title":"Simrad 9-Pin","offer_id":51550379245814,"sku":"APL541680-9","price":1899.99,"currency_code":"USD","in_stock":false},{"title":"Bare Wire","offer_id":51550379278582,"sku":"APL541680-3","price":1899.99,"currency_code":"USD","in_stock":false},{"title":"Raymarine 11-Pin","offer_id":51550379311350,"sku":"APL541680-5","price":1899.99,"currency_code":"USD","in_stock":false},{"title":"Garmin 12-Pin","offer_id":51550379344118,"sku":"APL541680-8","price":1899.99,"currency_code":"USD","in_stock":false},{"title":"Standard Horizon 9-Pin","offer_id":51550379376886,"sku":"APL541680-7","price":1899.99,"currency_code":"USD","in_stock":false},{"title":"Airmar 12-Pin","offer_id":51550379409654,"sku":"APL541680-4","price":1764.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0838834_apl145239.png?v=1787792758"},{"product_id":"apl990278","title":"Garmin GT51M-THP Stainless Steel Thru-Hull Transducer Pair, CHIRP ClearVü\/SideVü, 600W 80-160 kHz, 500W 260\/455 kHz, 12-Pin, Depth\/Temp, Up to 25 Degree Deadrise","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01966-11 is a GT51M-THP stainless steel thru-hull transducer pair for traditional CHIRP plus CHIRP ClearVü and SideVü scanning sonar using a 12-pin connection. Traditional sonar runs mid-band CHIRP 80 to 160 kHz at 600 W, and the ClearVü and SideVü elements run 260 and 455 kHz at 500 W per element.\u003c\/p\u003e\u003cp\u003eThis is a port and starboard set that installs on both sides of the keel so the side-looking beams stay clear. It also includes a fast-response temperature sensor, and it is intended for hull deadrises under 25 degrees at the mounting location.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThru-hull port and starboard transducer pair for ClearVü and SideVü scanning plus traditional CHIRP sonar\u003c\/li\u003e\n\u003cli\u003eTraditional CHIRP: 600 W, mid-band 80 to 160 kHz\u003c\/li\u003e\n\u003cli\u003eClearVü and SideVü elements: 500 W per element, 260 and 455 kHz\u003c\/li\u003e\n\u003cli\u003e12-pin connection through an included Y-cable to combine the pair at the display or sonar module\u003c\/li\u003e\n\u003cli\u003eBuilt-in fast-response temperature sensor for real-time surface readings\u003c\/li\u003e\n\u003cli\u003eStainless steel stems and thru-hull mounting hardware for secure installation below the waterline\u003c\/li\u003e\n\u003cli\u003eSpecified for hull deadrises less than 25 degrees at the install point\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the install as a true pair: one transducer on the port side and one on the starboard side, positioned so the keel does not block SideVü coverage. Fairing blocks are used to match the transducer to the hull angle; when the deadrise at the mounting location exceeds 5 degrees, a fairing block is required, and the cutting angle is limited to 25 degrees.\u003c\/p\u003e\u003cp\u003eBecause this is a thru-hull installation, take the same care you would with any below-waterline fitting: confirm internal clearance before drilling, seal any exposed core, and bed the hardware properly so it stays watertight through temperature swings and vibration.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer set is meant for Garmin sonar systems that support traditional CHIRP plus ClearVü and SideVü scanning and accept a 12-pin transducer connection. Match the supported sonar types and frequency ranges to your display or black box before ordering, especially if you are moving from an 8-pin or older transducer style.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eOn coastal runs, reef fishing, and deeper structure work, this setup gives you a traditional CHIRP view for arches and bottom separation alongside scanning views that help you read edges, bait, and bottom changes to both sides of the boat. It is a good match for boats where a single side-looking transducer would have its view shaded by the keel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the exterior after saltwater use and keep the faces clear of paint buildup and marine growth so the sonar stays consistent. During routine haul-out or diver checks, inspect the stems, bedding, and cable routing for signs of movement, abrasion, or seepage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo thru-hull transducers (port and starboard) with stainless steel stems\u003c\/li\u003e\n\u003cli\u003eFairing blocks\u003c\/li\u003e\n\u003cli\u003eY-cable\u003c\/li\u003e\n\u003cli\u003eBushings\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550381867254,"sku":"APL990278","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694385_apl990278_jpeg.jpg?v=1787792839"},{"product_id":"apl892585","title":"Garmin LiveScope Plus LVS34 Live Sonar Transducer, For GLS 10, 530-1100 kHz, 200 ft Range, Forward\/Down\/Perspective","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin LiveScope Plus System with GLS 10 \u0026amp; LVS34 is a live scanning sonar setup that pairs the LVS34 transducer with the GLS 10 black box so your compatible Garmin chartplotter can show real-time views of fish and structure around the boat.\u003c\/p\u003e\u003cp\u003eThe LVS34 operates from 530 to 1,100 kHz and is rated for up to 61 m (200 ft) of depth\/distance, with a field of view of 135 degrees front-to-back and 20 degrees side-to-side. The transducer body measures 161.7 x 77.5 x 47.8 mm (6.37 x 3.05 x 1.88 in.) and weighs 1018 g (2.25 lb.).\u003c\/p\u003e\u003cp\u003eThe GLS 10 mounts out of the way in a protected location and connects to your display over the Garmin Marine Network. It runs on 10 to 32 Vdc and uses 21 W typical power, with 58 W max for peak draw.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLive scanning sonar views with Forward, Down, and Perspective modes when the transducer is mounted and oriented for the view you want\u003c\/li\u003e\n\u003cli\u003eAuto stabilization that keeps the sonar view steady on the chartplotter screen in rougher conditions and accounts for transducer orientation\u003c\/li\u003e\n\u003cli\u003eLVS34 operating range: 530 to 1,100 kHz, up to 61 m (200 ft) depth\/distance, 135 degrees x 20 degrees field of view\u003c\/li\u003e\n\u003cli\u003eGLS 10 power input: 10 to 32 Vdc, 21 W typical power usage (58 W max)\u003c\/li\u003e\n\u003cli\u003eGLS 10 data output over Garmin Marine Network for integration with compatible Garmin chartplotters\u003c\/li\u003e\n\u003cli\u003eTransducer size and weight suited to common trolling motor, shaft, and Perspective-style mounting positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple configurations based on whether the GLS 10 sonar module is included.\u003c\/p\u003e\u003cp\u003eThe LVS34 transducer and the mounting hardware come with both options. The configuration with the sonar module adds the GLS 10 plus the power and network cabling needed to connect it into your Garmin Marine Network.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-02706-00 (Sonar Module Included: Yes). This is the complete package for a first-time LiveScope Plus install where you need the GLS 10 black box as well as the LVS34 transducer.\u003c\/li\u003e\n\u003cli\u003e010-02706-10 (Sonar Module Included: No). This is the LVS34 transducer package for upgrading an existing GLS 10 setup, keeping the same sonar module and swapping to the newer transducer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis system relies on a compatible Garmin chartplotter and a Garmin Marine Network connection between the display and the GLS 10. Plan your install around where the transducer will live (trolling motor barrel, shaft, or a separate pole) and where the GLS 10 can be mounted in a dry, serviceable spot with clean power.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the LVS34 so it has a clear view of the water and can be rotated between Forward, Down, and Perspective orientations as needed. Run the transducer cable back to the GLS 10 with gentle bends and chafe protection, then connect the GLS 10 to the chartplotter over the Garmin Marine Network and supply 10 to 32 Vdc power from your boat’s distribution panel with appropriate circuit protection.\u003c\/p\u003e\u003cp\u003eOnce powered, use the chartplotter’s LiveScope settings to confirm the correct viewing mode and orientation, then fine-tune gain and range for the water depth, speed, and bottom type you typically fish.\u003c\/p\u003e\u003ch6\u003eWho it fits best\u003c\/h6\u003e\u003cp\u003eThis setup is a strong match for anglers who want real-time feedback while working a trolling motor or scanning structure before making a drift. It also fits boats where you can dedicate a clean network run and a protected mounting location for the GLS 10, so the system stays easy to service season after season.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"No","offer_id":51550382096630,"sku":"APL892585-V2","price":1299.99,"currency_code":"USD","in_stock":false},{"title":"Yes","offer_id":51550382129398,"sku":"APL892585-V1","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1266788_apl892585_jpeg.jpg?v=1787792859"},{"product_id":"apl115887","title":"Airmar - B75C-20-M 20d Tilt Transducer","description":"\u003ch4\u003eAdvanced CHIRP Technology for Superior Underwater Clarity\u003c\/h4\u003e\u003cp\u003eThe Airmar B75C-20-M transducer is designed for serious anglers and marine professionals seeking exceptional underwater imaging. Equipped with a 20° tilted element and cutting-edge Medium CHIRP technology, this transducer ensures precise depth readings and fast-response water temperature detection. Whether you're a commercial fisherman, charter captain, or tournament angler, the B75C-20-M enhances your ability to locate fish and structures with remarkable accuracy.\u003c\/p\u003e\u003cp\u003eWith a depth capability of up to 900 feet, this transducer delivers greater detail and resolution compared to traditional sonar. Its broadband CHIRP technology enables bottom detection with enhanced clarity, making it possible to distinguish between individual baitfish, game fish, and underwater structures. The wider beam coverage increases your ability to locate fish under the boat, even at higher speeds.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Frequency:\u003c\/strong\u003e 80 kHz to 130 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeamwidth:\u003c\/strong\u003e 24° to 16°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Tilt:\u003c\/strong\u003e 20°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeadrise Compatibility:\u003c\/strong\u003e 16° to 24°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth:\u003c\/strong\u003e 900 feet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Benefits at a Glance\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDepth and fast-response water temperature sensor for real-time data\u003c\/li\u003e\n\u003cli\u003eProvides a total bandwidth of 50 kHz in one transducer\u003c\/li\u003e\n\u003cli\u003eImproved target separation for distinguishing between different fish species\u003c\/li\u003e\n\u003cli\u003eWider beam coverage for greater fishing area detection\u003c\/li\u003e\n\u003cli\u003eClear imaging even at higher boat speeds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVariations Available\u003c\/h4\u003e\u003cp\u003eThe Airmar B75C-20-M is available with multiple connector options to ensure compatibility with various marine electronics brands:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-MM\u003c\/strong\u003e – Airmar 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-0\u003c\/strong\u003e – Bare Wire Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-12G\u003c\/strong\u003e – Garmin 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-8G\u003c\/strong\u003e – Garmin 8-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-14HB\u003c\/strong\u003e – Humminbird 14-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-HB\u003c\/strong\u003e – Humminbird 9-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-BL\u003c\/strong\u003e – Lowrance 7-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-11R\u003c\/strong\u003e – Raymarine 11-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB75C-20-M-9N\u003c\/strong\u003e – Simrad 9-Pin Connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIdeal for both recreational and professional use, the Airmar B75C-20-M ensures superior underwater detection, increased fishing efficiency, and reliable performance in various marine conditions.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Raymarine 11-Pin","offer_id":51550383243510,"sku":"APL115887-1","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Lowrance 7-Pin","offer_id":51550383276278,"sku":"APL115887-2","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Simrad 9-Pin","offer_id":51550383309046,"sku":"APL115887-0","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Garmin 8-Pin","offer_id":51550383341814,"sku":"APL115887-9","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Airmar 12-Pin","offer_id":51550383374582,"sku":"APL115887-4","price":744.0,"currency_code":"USD","in_stock":true},{"title":"Bare Wire","offer_id":51550383407350,"sku":"APL115887-5","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Humminbird 9-Pin","offer_id":51550383440118,"sku":"APL115887-8","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Garmin 12-Pin","offer_id":51550383472886,"sku":"APL115887-7","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Humminbird 14-Pin","offer_id":51550383505654,"sku":"APL115887-3","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0838752_apl115887.png?v=1787792875"},{"product_id":"apl336653","title":"Simrad XSonic Airmar B150M CHIRP Thru-Hull Transducer, 0° Tilt, 95-155 kHz, 300W, Bronze Housing, 9-Pin, 10 m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13920-001 is a through-hull CHIRP transducer that operates in the 95-155 kHz range and provides depth plus water temperature to a compatible Simrad sounder.\u003c\/p\u003e\u003cp\u003eIt runs at 300 W and is aimed at shallow to mid-depth fishing, with a published maximum depth performance up to 183 m (600 ft), depending on bottom type and sea conditions. Beamwidth varies with frequency, from about 26 degrees down to 17 degrees, which helps keep targets separated when you are working structure or fish that are suspended.\u003c\/p\u003e\u003cp\u003eThis is the 0 degree Tilted Element version, intended for hull deadrise angles from 0 to 7 degrees so the beam points straight down when the housing sits flush. Connection is via a black 9-pin plug on a 10 m (33 ft) cable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMedium CHIRP band of 95-155 kHz with 60 kHz of bandwidth from a single transducer\u003c\/li\u003e\n\u003cli\u003e300 W output with published maximum depth performance up to 183 m (600 ft), conditions permitting\u003c\/li\u003e\n\u003cli\u003eBeamwidth from 26 degrees to 17 degrees for coverage that still keeps targets defined\u003c\/li\u003e\n\u003cli\u003eDepth and fast-response water temperature sensing in one through-hull unit\u003c\/li\u003e\n\u003cli\u003e0 degree Tilted Element housing for hull deadrise angles from 0 to 7 degrees\u003c\/li\u003e\n\u003cli\u003eBronze, low-profile through-hull housing intended for fiberglass or wood hull installations\u003c\/li\u003e\n\u003cli\u003eBlack 9-pin connector with 10 m (33 ft) cable for compatible Simrad sonar connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 9-pin connector and CHIRP frequency band are meant for Simrad systems that support CHIRP sonar on a 9-pin transducer port. Check your display or sonar module for connector type and supported transducer inputs before committing to the install.\u003c\/p\u003e\u003cp\u003eThe 0 degree model is the right match when the mounting location has little deadrise. If your hull angle at the chosen spot is higher than 7 degrees, a different tilt option is typically required so the beam stays vertical.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan for a 51 mm (2 inch) through-hull hole and choose a location that stays in clean water flow while underway, away from strakes, steps, and turbulence sources. A careful bedding job with marine sealant and correct orientation are what make the difference between solid bottom tracking and noisy returns.\u003c\/p\u003e\u003cp\u003eRoute the 10 m cable so it is protected from chafe and heat, and keep it clear of moving parts and sharp edges. Through-hull installs affect the hull structure and watertight integrity, so many owners have a yard or experienced installer handle the cutout and sealing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis transducer is a good match for anglers who run a Simrad CHIRP sounder and want medium-band performance for bays, nearshore grounds, and inland waters where fish and structure sit in the same zone. When installed properly, the low-profile housing helps maintain a clean sonar picture as speed comes up.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":51550390157558,"sku":"APL336653","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697679_apl336653_jpeg.jpg?v=1787793074"},{"product_id":"apl505574","title":"Clipper In-Hull Transducer Mounting Kit - Transducer Not Included CLZ-IHK","description":"\u003cp\u003eComplete kit for mounting depth transducer inside GRP hull.\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Clipper","offers":[{"title":"Default Title","offer_id":51550398087414,"sku":"APL505574","price":49.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1105977_apl505574jpg.jpg?v=1787793319"},{"product_id":"apl551196","title":"Simrad TM150M Transom Mount CHIRP Transducer, Medium CHIRP 95-155 kHz, 300W, 26-17 Degree Beamwidth, Depth\/Temp Sensor, 9-Pin, 10m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13944-001 is a TM150M transom mount CHIRP transducer with a 9-pin connector and a 10 m cable for Medium CHIRP sonar (95-155 kHz) at 300 W.\u003c\/p\u003e\u003cp\u003eIt reads depth and water temperature from one housing, and the beam tightens from 26 to 17 degrees across the band, which helps keep fish marks separate when you are working structure, bait schools, or suspended targets.\u003c\/p\u003e\u003cp\u003eThis style of transom mount install is common on planing hulls with outboards or sterndrives, and it is typically used on smaller boats up to about 8 m (25 ft) where easy access and adjustability matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMedium CHIRP 95-155 kHz with a 60 kHz sweep for one-channel fishfinding.\u003c\/li\u003e\n\u003cli\u003e300 W rating with beamwidth that narrows from 26 to 17 degrees across the band.\u003c\/li\u003e\n\u003cli\u003eIntegrated depth and fast-response water-temperature sensing through the same transducer.\u003c\/li\u003e\n\u003cli\u003eTransom-mount format suited to planing hulls and common outboard or I\/O setups.\u003c\/li\u003e\n\u003cli\u003eUrethane housing with a release-style bracket that helps protect the transducer if it strikes an obstruction.\u003c\/li\u003e\n\u003cli\u003eWorks on fiberglass, wood, aluminum, or steel transoms when mounted in clean water flow.\u003c\/li\u003e\n\u003cli\u003e9-pin connector with 10 m (33 ft) attached cable for routing back to your sounder or sonar module.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer outputs sonar and temperature data through a 9-pin connector. Confirm that your display or sonar module has the matching 9-pin transducer port and supports Medium CHIRP (95-155 kHz). If your unit uses a different connector style, an adapter may be required.\u003c\/p\u003e\u003cp\u003eIt is intended for a transom angle in the 3 to 20 degrees range. Boats with stepped hulls, heavy aeration, or tight engine brackets may need extra care in placement to keep the transducer in solid water at speed.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it where the face stays submerged when the boat is on plane, and where prop wash, strakes, and thru-hull turbulence will not feed bubbles across the bottom of the transducer. A small height change makes a big difference, so plan to fine-tune after the first sea trial.\u003c\/p\u003e\u003cp\u003eRoute the cable away from ignition wiring and high-current runs when possible, leave a drip loop at the connector, and seal any deck pass-through with a proper gland so washdowns do not follow the cable inside.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup fits inshore, coastal, and freshwater fishing boats that need clear CHIRP target separation around reefs, points, docks, and drop-offs, while keeping the simplicity of a transom mount that is easy to inspect and adjust.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse after saltwater use and keep the acoustic face free of barnacles and heavy buildup. Mild soap and water is usually enough for cleaning.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":51550400119030,"sku":"APL551196","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0836793_apl551196.jpg?v=1787793440"},{"product_id":"apl427130","title":"Raymarine B175H-W Bronze Thru-Hull Transducer, 1kW, 12° Tilted Element, 150-250 kHz, 25° Beam, For 8-15° Deadrise","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine A80320 is a B175H-W 1 kW bronze thru-hull CHIRP transducer with a 12° tilted element for fiberglass or wood hulls with 8° to 15° deadrise. It reads depth and water temperature, using a high-wide CHIRP frequency range of 150 to 250 kHz with a fixed 25° beam for broad coverage under the boat.\u003c\/p\u003e\u003cp\u003eThis transducer suits anglers who want a wider view of the water column without fitting a large fairing block. The tilted element helps keep the sonar beam aimed correctly after installation on a moderately angled hull, which matters when running offshore, searching structure, or tracking fish while the boat is moving.\u003c\/p\u003e\u003cp\u003eThe unit includes a 6 ft \/ 2 m pigtail and requires the proper Raymarine transducer extension or operation cable to complete the installation. Plan the cable run before cutting the hull, especially on center consoles and sportfishing boats where the transducer may be several feet from the sonar module or display network.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 kW RMS output for use with compatible Raymarine CHIRP sonar systems.\u003c\/li\u003e\n\u003cli\u003eHigh-wide CHIRP operation from 150 to 250 kHz for broad coverage and target detail in the upper water column.\u003c\/li\u003e\n\u003cli\u003eFixed 25° beam width gives more side-to-side sonar coverage than narrow high-frequency transducer options.\u003c\/li\u003e\n\u003cli\u003e12° tilted element suits hulls with 8° to 15° deadrise, helping aim the sonar beam vertically after installation.\u003c\/li\u003e\n\u003cli\u003eThru-hull installation with a low-profile bronze body for boats where a clean underwater profile matters.\u003c\/li\u003e\n\u003cli\u003eReads both depth and water temperature from one transducer.\u003c\/li\u003e\n\u003cli\u003eRated for depth readings up to 800 ft, with real-world performance depending on water conditions, bottom type, installation quality, and connected sonar hardware.\u003c\/li\u003e\n\u003cli\u003eApproved for fiberglass and wood hulls.\u003c\/li\u003e\n\u003cli\u003eSupplied with a 6 ft \/ 2 m pigtail and requires a matching Raymarine cable to finish the system connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a thru-hull transducer, so installation requires drilling the hull and bedding the fitting correctly. The 12° tilt should be matched to the boat’s deadrise at the mounting location, not just the published deadrise at the transom. A clean water flow location is important, away from strakes, thru-hulls, prop wash, and other sources of aerated water.\u003c\/p\u003e\u003cp\u003eThe bronze construction makes it a strong match for fiberglass and wood hulls. It should not be used on metal hulls unless the installation is specifically engineered to prevent corrosion and isolation issues. As with any thru-hull fitting, final installation should follow proper marine sealing and inspection practices.\u003c\/p\u003e\u003ch6\u003eElectrical and sonar integration\u003c\/h6\u003e\u003cp\u003eThe B175H-W is intended for compatible Raymarine CHIRP sonar equipment. It is not a self-contained network sensor, and it does not plug directly into an NMEA 2000 backbone. The transducer cable must be routed to the correct sonar input or module using the appropriate Raymarine extension or operation cable.\u003c\/p\u003e\u003cp\u003eBecause the wide-beam version uses a short pigtail, check the complete cable path before installation. Allow enough service loop for strain relief, avoid sharp bends, and keep the cable away from high-current DC wiring where possible to reduce the chance of interference.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis transducer is a strong fit for coastal and offshore fishing boats that use Raymarine CHIRP sonar and need more coverage under the hull when looking for bait, game fish, or bottom changes. The wide beam is especially useful when the goal is to see more of the water column rather than only a narrow slice directly below the boat.\u003c\/p\u003e\u003cp\u003eIt also works well on boats where a low-profile thru-hull is preferred over a transom mount or a large external fairing. For best results, the hull angle, mounting location, cable path, and connected sonar hardware should all be checked before installation begins.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":51550400479478,"sku":"APL427130","price":1579.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1105015_apl427130jpg.jpg?v=1787793459"},{"product_id":"apl936085","title":"Garmin Airmar B164-20 Tilted Element Thru-Hull Transducer, 20 Degree Tilt, 1kW, 50\/200 kHz, Depth\/Temp, Bronze Housing, 6-Pin Connector","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11010-00 is a 1 kW, 50\/200 kHz thru-hull transducer with a fixed 20° tilted element and a 6-pin connector for traditional sonar depth and water temperature. It is built around a low-profile bronze housing that extends less than 6.35 mm (0.25 in) below the hull, which helps it stay out of harm’s way on trailer bunks and rollers.\u003c\/p\u003e\u003cp\u003eThe 20° internal tilt is meant to match hull deadrise angles from 16° to 24° at the mounting location, so the sonar beam points straight down when the boat is on plane. At 50 kHz it uses a wide beam (22°) for deeper water tracking, and at 200 kHz it uses a narrow beam (6°) for better bottom detail and target separation.\u003c\/p\u003e\u003cp\u003eThis is a bronze-housed thru-hull style that suits fiberglass or wood hulls and is not a fit for aluminum hulls. Depth performance is rated to 549 m (1,800 ft) at 50 kHz and 244 m (800 ft) at 200 kHz, depending on water conditions, bottom type, installation quality, and sounder settings.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTraditional dual-frequency sonar at 50\/200 kHz with 1 kW RMS power\u003c\/li\u003e\n\u003cli\u003eFixed 20° tilted element for hull deadrise angles from 16° to 24° at the install point\u003c\/li\u003e\n\u003cli\u003eDepth and fast-response water temperature sensing (no speed function)\u003c\/li\u003e\n\u003cli\u003eLow-profile bronze thru-hull housing that extends less than 6.35 mm (0.25 in) below the hull\u003c\/li\u003e\n\u003cli\u003eBeam coverage: 22° at 50 kHz for wider deep-water coverage, 6° at 200 kHz for tighter detail\u003c\/li\u003e\n\u003cli\u003eThru-hull cutout size of 95 mm (3-3\/4 in) for typical fiberglass or wood installations\u003c\/li\u003e\n\u003cli\u003e6-pin connector for systems that use the Garmin 6-pin transducer port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eConfirm three things before ordering: your hull material, the deadrise where you plan to install, and the connector style at the sounder or sonar module. The 20° tilt is intended for 16° to 24° deadrise at the mounting location, and the bronze housing is intended for fiberglass or wood hulls.\u003c\/p\u003e\u003cp\u003eYour sonar must support 50\/200 kHz traditional sonar and a 1 kW transducer. If your Garmin device uses a different transducer port style than 6-pin, plan on using the correct adapter so the transducer can be connected without modifying the cable.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a thru-hull install that requires drilling a 95 mm (3-3\/4 in) hole and bedding the housing with marine sealant. The arrow on the top of the transducer should be aligned toward the keel or centerline so the internal element angle matches the hull’s deadrise.\u003c\/p\u003e\u003cp\u003eAfter launching, check for leaks right away and keep an eye on the install during the first hours in the water. Avoid pulling or carrying the transducer by the cable, and route the cable where it will not chafe or get pinched by panels, hatches, or rigging tubes.\u003c\/p\u003e\u003ch6\u003eOn-water use notes\u003c\/h6\u003e\u003cp\u003eThe 50 kHz channel is the go-to when you are pushing deeper water and want bottom tracking farther down, while 200 kHz tightens the beam for cleaner definition in shallower depths and around structure. Because the housing sits close to flush, it is a common choice for boats that run on plane and trailer often, where a larger fairing block would be vulnerable.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face clean of growth and rinse it after saltwater use, especially if the boat sits in the water for extended periods. When cleaning around the transducer, stick with mild detergent and avoid solvent-based cleaners that can damage the transducer’s face and seals.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550402216182,"sku":"APL936085","price":1275.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694095_apl936085_jpeg.jpg?v=1787793524"},{"product_id":"apl345097","title":"Lowrance - Active Imaging 2-In-1 \u0026 83\/200 Package with Y-Cable","description":"\u003ch4\u003eUncover Ocean Secrets with Active Imaging \u0026amp; High-Speed Skimmer Combo\u003c\/h4\u003e\n\u003cp\u003eDive into the enigmatic waters with the \u003cstrong\u003eActive Imaging 2-In-1 \u0026amp; 83\/200 Package\u003c\/strong\u003e complemented by a versatile Y-Cable. This package unfolds the mysteries beneath the surface with its high-resolution sonar imaging and unprecedented range coverage.\u003c\/p\u003e\n\u003ch4\u003eRevolutionary Sonar Innovations\u003c\/h4\u003e\n\u003cp\u003eBe at the forefront of sonar technology with Active Imaging, which casts a net of high-resolution sonar beams into the depths, unveiling detailed underwater scenarios without compromising on range.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExplore two models of Active Imaging for tailored sonar expeditions.\u003c\/li\u003e\n\u003cli\u003eExperience sonar singularity with separate CHIRP transducer option for dual transducer installations.\u003c\/li\u003e\n\u003cli\u003eOpt between 800kHz or 455kHz frequency operations, granting you a maximum range of 150ft and 300ft respectively.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eGroundbreaking Transducer Technology\u003c\/h4\u003e\n\u003cp\u003eThe Active Imaging transducer technology stands as a monument of modern sonar engineering. Its construction from a sound-reactive polymer mimics water behavior, ensuring that no sonar signals are lost in transition.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBenefit from fast ping speeds and heightened sonar signal focus thanks to separate sonar elements for SideScan transmit and receive.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOutstanding Features\u003c\/h4\u003e\n\u003cp\u003eEngage with a plethora of features designed to enrich your marine explorations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo-compromise high-resolution details brought to you by Active Imaging sonar.\u003c\/li\u003e\n\u003cli\u003eAmbit of operations with 800kHz, balancing high detail and far-seeing capabilities.\u003c\/li\u003e\n\u003cli\u003eTake full advantage of high-resolution IPS screens of NSS evo3 and HDS Live to witness the grandeur of underwater realms.\u003c\/li\u003e\n\u003cli\u003eSeamless integration with next-generation displays, sans any additional hardware or modules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBrace the Elements\u003c\/h4\u003e\n\u003cp\u003eOur marine products are built to withstand the elements, be it the chill of the arctic or the warmth of tropical waters.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperational temperature range: -15°C to +55°C (+5°F to +131°F)\u003c\/li\u003e\n\u003cli\u003eStorage temperature range: -30°C to +70°C (-22°F to +158°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePhysical Manifestation\u003c\/h4\u003e\n\u003cp\u003eAdorned with practical physical attributes for an uncomplicated installation and operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 7.6 m (25 ft)\u003c\/li\u003e\n\u003cli\u003eVersatile mounting options including Transom, flush step, and jack plate mounting\u003c\/li\u003e\n\u003cli\u003eEquipped with a 9-pin connector for streamlined connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTransducer Tales\u003c\/h4\u003e\n\u003cp\u003eBecome one with the sea with a transducer output that includes SideScan imaging, DownScan imaging, and temperature readings.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDive deep with maximum depths of 91 m (300 ft) for both DownScan and SideScan, extending a side range of 46 m (150ft) at 800 kHz.\u003c\/li\u003e\n\u003cli\u003eOperational speed of DownScan and SideScan: 9 knots (10 mph)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSkim the Depths with High-Speed Skimmer\u003c\/h4\u003e\n\u003cp\u003eThe 9-Pin High-Speed Skimmer Transducer glides across waters, delivering a frequency of 83\/200kHz with temperature reading capabilities, all funneled through a sleek black 9-pin connector.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTransom-mounted for optimum performance.\u003c\/li\u003e\n\u003cli\u003eHigh-Speed Skimmer design for effective depth and temperature readings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550403461366,"sku":"APL345097","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697745_apl345097_jpeg.jpg?v=1787793595"},{"product_id":"apl634625","title":"Furuno - AIS Interface Box","description":"\u003ch4\u003eUnlock Seamless Marine Communication\u003c\/h4\u003e\n\u003cp\u003eIntroducing the Furuno AIS Interface Box – your key to enhanced maritime communication and safety. This cutting-edge device seamlessly integrates with your onboard systems to provide real-time vessel tracking, collision avoidance, and more. Dive into the details below to discover how this innovative solution can elevate your maritime experience.\u003c\/p\u003e\n\u003ch4\u003eTechnical Marvel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConnects with AIS-equipped vessels\u003c\/li\u003e\n\u003cli\u003eTransmits and receives AIS data\u003c\/li\u003e\n\u003cli\u003eCompatible with Furuno chartplotters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\n\u003cp\u003eDimensions: 7.5\" x 5.2\" x 2.1\" (L x W x H)\u003c\/p\u003e\n\u003ch4\u003eEnhanced Visibility\u003c\/h4\u003e\n\u003cp\u003eIf you crave clear and concise data, our Furuno AIS Interface Box has got you covered with customizable color temperature settings. Choose the perfect display option to suit your preferences, whether it's a soothing warm glow or a crisp cool white.\u003c\/p\u003e\n\u003ch4\u003eSleek Finishes\u003c\/h4\u003e\n\u003cp\u003eAdd a touch of elegance to your vessel with our sleek finish options. Whether you prefer a classic matte black or a polished stainless steel look, our Furuno AIS Interface Box will complement your boat's aesthetic seamlessly.\u003c\/p\u003e\n\u003ch4\u003eKey Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReal-time vessel tracking\u003c\/li\u003e\n\u003cli\u003eEnhanced collision avoidance\u003c\/li\u003e\n\u003cli\u003eSeamless integration with Furuno chartplotters\u003c\/li\u003e\n\u003cli\u003eCustomizable color temperature\u003c\/li\u003e\n\u003cli\u003eElegant finish options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVariations\u003c\/h4\u003e\n\u003cp\u003eChoose the Furuno AIS Interface Box that suits your needs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFuruno AIS Interface Box - Standard Edition\u003c\/li\u003e\n\u003cli\u003eFuruno AIS Interface Box - Professional Edition\u003c\/li\u003e\n\u003cli\u003eFuruno AIS Interface Box - Premium Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eElevate your maritime experience with the Furuno AIS Interface Box. Stay connected, stay safe, and navigate with confidence. Choose your edition and set sail towards a brighter future on the water.\u003c\/p\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550406672630,"sku":"APL634625","price":570.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696838_apl634625_jpeg.jpg?v=1787793699"},{"product_id":"apl016662","title":"Lowrance - ActiveTarget 2 Transducer Only","description":"\u003ch4\u003eDive into Clarity: ActiveTarget® 2 Transducer\u003c\/h4\u003e\n\u003cp\u003eIntroducing the ActiveTarget® 2 Transducer: Your premier companion for fishing expeditions. This state-of-the-art transducer allows you to view fish and underwater structures with unparalleled clarity. Witness in real-time how fish respond to your lure and seize the opportunity to adapt swiftly, ensuring that you always stay a step ahead in your game.\u003c\/p\u003e\n\u003ch4\u003eTechnical Whisperings\u003c\/h4\u003e\n\u003cp\u003eThe true marvel behind the ActiveTarget® 2 is its impeccable resolution which provides clear, live views, setting it apart from other transducers. Please note that this product listing is for the transducer only.\u003c\/p\u003e\n\u003ch4\u003eGolden Nuggets: Key Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExceptional resolution for detailed live views\u003c\/li\u003e\n\u003cli\u003eMonitor fish responses to your lure in real-time\u003c\/li\u003e\n\u003cli\u003eDesigned to enhance and elevate your fishing experience\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550408868086,"sku":"APL016662","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697595_apl016662_jpeg.jpg?v=1787793839"},{"product_id":"apl538481","title":"Raymarine M265 CHIRP In-Hull Transducer, 1kW, Urethane","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine M265 is an in-hull CHIRP depth transducer for fiberglass hulls, built for boats that need serious sonar performance without drilling a thru-hull opening below the waterline.\u003c\/p\u003e\u003cp\u003eThis 1 kW urethane transducer uses 8 internal ceramic elements and supports up to 117 kHz of total CHIRP range, depending on the selected frequency configuration. It installs inside the supplied tank, which is cut to match the boat’s deadrise angle, and it suits hull deadrise angles from 0 to 30 degrees.\u003c\/p\u003e\u003cp\u003eThe M265 records depth and connects through an 11-pin CHIRP transducer connector for compatible Raymarine sonar systems, making it a strong fit for offshore fishing boats, larger cruisers, and trailered or lifted vessels where an external transducer is not preferred.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIn-hull installation avoids drilling a transducer hole through the hull below the waterline.\u003c\/li\u003e\n\u003cli\u003e1 kW RMS power for CHIRP sonar use on compatible Raymarine fishfinder systems.\u003c\/li\u003e\n\u003cli\u003eUrethane housing with 8 internal ceramic elements for wide CHIRP frequency coverage.\u003c\/li\u003e\n\u003cli\u003eWorks with fiberglass hulls and supports deadrise angles from 0 to 30 degrees.\u003c\/li\u003e\n\u003cli\u003e33 ft. cable length gives flexibility when routing from the installation tank to the sonar module or display.\u003c\/li\u003e\n\u003cli\u003e11-pin CHIRP connector mates with compatible Raymarine systems including Axiom Pro RVX, Axiom 2 Pro RVM, RVX-1000, RVM-1600, CP470, CP570, and legacy CHIRP sonar modules.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe M265 is offered in two frequency configurations. Both are in-hull CHIRP transducers in the same M265 family, with the frequency range selected to match the way the boat is used and the water depths commonly fished.\u003c\/p\u003e\u003cp\u003eThe low-frequency band appears on both variants. The second band changes between high frequency and medium frequency, which affects how the transducer is matched to shallow-water detail, target separation, and deeper-water searching.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA80012: Low-High frequency range. This version covers 42-65 kHz on low frequency and 130-210 kHz on high frequency, with a maximum depth rating of 3,000 ft. on low and 1,000 ft. on high.\u003c\/li\u003e\n\u003cli\u003eA80038: Low-Medium frequency range. This version covers 42-65 kHz on low frequency and 85-135 kHz on medium frequency, with a maximum depth rating of 3,000 ft. on low and 1,500 ft. on medium.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe M265 mounts inside the hull in a tank rather than outside the boat. The tank is cut to the vessel’s deadrise angle so the transducer can sit correctly oriented for sonar performance while remaining protected inside the hull.\u003c\/p\u003e\u003cp\u003eThis style of installation is useful on boats that are trailered, lifted, or run in areas where external fittings can be exposed to impact, fouling, or service access issues. It is intended for fiberglass hulls, so hull material should be checked before purchase.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe 11-pin CHIRP connector is intended for direct connection to compatible Raymarine CHIRP sonar equipment. It is not a general NMEA sensor and should be matched to a supported Raymarine sonar module or multifunction display before installation.\u003c\/p\u003e\u003cp\u003eFor a clean installation, plan the 33 ft. cable route before bonding the tank in place. Keep the cable protected from sharp bends, engine-room heat, and areas where gear or service work could pull on the connector.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThe M265 suits fishing-focused boats that need CHIRP depth performance for reading bottom, bait, and fish targets without adding a transducer fairing or thru-hull stem outside the hull. The Low-High version is a practical match for crews who value high-frequency detail, while the Low-Medium version adds medium-frequency coverage for deeper target work and structure fishing.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Low-High","offer_id":51550409785590,"sku":"APL538481-V1","price":1759.0,"currency_code":"USD","in_stock":true},{"title":"Low-Medium","offer_id":51550409818358,"sku":"APL538481-V2","price":1959.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1327844_apl538481.webp?v=1787793895"},{"product_id":"apl578200","title":"GROCO Stainless Steel Hose Barb Thru-Hull Fitting - 3\/4\" HTH-750-S","description":"\u003cp\u003e\u003cstrong\u003eStainless Steel Hose Barb Thru-Hull Fitting - 3\/4\" \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNPS Thread With Hose Connection\u003c\/li\u003e\n\u003cli\u003e#316 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eUL Listed 647B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":51550410801398,"sku":"APL578200","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109127_apl578200jpg.jpg?v=1787793961"},{"product_id":"apl759962","title":"GROCO 2\" Bronze Combo Scoop Thru-Hull w\/Nut STH-2000-W","description":"\u003cp\u003e\u003cstrong\u003e2\" Bronze Combo Scoop Thru-Hull w\/Nut \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for increased flow compared to standard Thru Hulls\u003c\/li\u003e\n\u003cli\u003eNPSM \/ NPT combination thread\u003c\/li\u003e\n\u003cli\u003eC83600 Bronze\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThread NPS: 2\"\u003c\/p\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":51550412505334,"sku":"APL759962","price":183.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1114786_apl759962jpg.jpg?v=1787794068"},{"product_id":"apl578086","title":"GROCO Bronze Hose Barb Thru-Hull Fitting - 5\/8\" HTH-625","description":"\u003cp\u003e\u003cstrong\u003eBronze Hose Barb Thru-Hull Fitting - 5\/8\" \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNPS Thread With Hose Connection\u003c\/li\u003e\n\u003cli\u003eC83600 Bronze\u003c\/li\u003e\n\u003cli\u003eUL Listed 647B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GROCO","offers":[{"title":"Default Title","offer_id":51550414668022,"sku":"APL578086","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1109124_apl578086jpg.jpg?v=1787794199"},{"product_id":"apl408547","title":"Simrad xSonic B150M 20° CHIRP Thru-Hull Transducer, For 16-24° Deadrise Hulls, 300W, 95-155 kHz, Depth\/Temp, Bronze Housing, 9-Pin Connector, 10m Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13922-001 is an XSONIC B150M thru-hull CHIRP transducer with a 20° tilt, a 9-pin connector, and a 10 m cable for Simrad sonar installations.\u003c\/p\u003e\u003cp\u003eIt runs a medium CHIRP band from 95 to 155 kHz at 300 W and reports both depth and water temperature. Medium CHIRP is a practical choice when you want clear fish separation and bottom detail from shallow water into moderate depths, whether you are working reefs, wrecks, and ledges, or covering open water.\u003c\/p\u003e\u003cp\u003eThe bronze housing suits fiberglass and wood hulls where a flush thru-hull install is the cleanest option. Depth range depends heavily on hull construction, installation location, sea state, and target conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMedium CHIRP operation: 95 to 155 kHz with 300 W output\u003c\/li\u003e\n\u003cli\u003e20° tilted element to keep the beam closer to straight down on hulls with deadrise\u003c\/li\u003e\n\u003cli\u003eDepth and water temperature sensing in one thru-hull fitting\u003c\/li\u003e\n\u003cli\u003eBronze thru-hull housing suited to fiberglass and wood hull applications\u003c\/li\u003e\n\u003cli\u003e9-pin transducer connector with a 10 m cable for flexible routing to the display or sounder module\u003c\/li\u003e\n\u003cli\u003eBeam coverage that narrows across the band (about 26° to 17°) to balance area coverage and target separation\u003c\/li\u003e\n\u003cli\u003eStrong bottom tracking when mounted in clean water flow and installed with correct angle and seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer is intended for sonar systems that support medium-band CHIRP and accept a 9-pin transducer connection. Before ordering, confirm your sounder or multifunction display supports CHIRP and that the connector type matches your sonar port or adapter setup.\u003c\/p\u003e\u003cp\u003ePlan the install location so the transducer face sits in solid, non-aerated water at speed. That placement matters as much as the transducer itself for consistent bottom lock and clean target returns.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThru-hull installs are typically set ahead of turbulence sources like steps, strakes, and intakes, and away from prop wash. The 20° tilt helps align the element without a fairing block, but the final mounting angle still needs to match the hull area where it is installed.\u003c\/p\u003e\u003cp\u003eDry-fit the cable run before drilling so the 10 m lead reaches the sonar connection without hard bends, pinch points, or chafe. Use proper marine bedding and strain relief, and keep the connector protected from water during routing and service work.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe medium CHIRP range works well for coastal and near-offshore fishing where you want one thru-hull to cover mixed depths. You will see wider coverage at the lower end of the band and a tighter beam as frequency increases, which helps when you are watching fish tight to structure or separating targets near the bottom.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the transducer face clean for consistent performance. In heavy growth areas, use a transducer-safe antifouling coating and avoid scraping or sanding that can damage the acoustic surface.\u003c\/p\u003e\u003cp\u003ePeriodically check the external housing, the inside nut, and the cable where it passes through bulkheads for tightness and chafe, especially after trailering or a hard season offshore.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":51550415749366,"sku":"APL408547","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697675_apl408547_jpeg.jpg?v=1787794254"},{"product_id":"apl303516","title":"Humminbird - XP-9-20-T In-Hull Puck Transducer","description":"\u003ch3\u003ePrecision and Reliability for Your Marine Adventures\u003c\/h3\u003e\u003cp\u003eThe Humminbird XP-9-20-T In-Hull Puck Transducer is the perfect solution for marine enthusiasts seeking accurate and dependable sonar readings. Designed to work seamlessly with a variety of Humminbird fish finders, this in-hull transducer offers both single and dual beam capabilities, providing clear and precise imaging of the underwater environment. Whether you're navigating coastal waters or exploring the open sea, the XP-9-20-T delivers exceptional performance to enhance your boating experience.\u003c\/p\u003e\u003ch3\u003eSuperior Sonar Technology\u003c\/h3\u003e\u003cp\u003eThe XP-9-20-T transducer features advanced sonar technology that supports both 20-degree and 60-degree beam angles. Operating at frequencies of 200 kHz and 83 kHz, this device ensures optimal coverage and detail, allowing you to detect fish and structures with ease. The built-in temperature sensor provides real-time water temperature data, helping you make informed decisions on the water.\u003c\/p\u003e\u003ch3\u003eKey Features and Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Beam Angles:\u003c\/strong\u003e Single\/Dual Beam operation with 20-degree and 60-degree options for detailed imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Frequency Operation:\u003c\/strong\u003e Dual frequency capability (200\/83 kHz) for versatile underwater exploration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Temperature Sensor:\u003c\/strong\u003e Accurate water temperature readings for better fishing strategy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged In-Hull Design:\u003c\/strong\u003e Securely installs inside the hull, protecting the transducer from external elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Compatibility:\u003c\/strong\u003e Compatible with multiple Humminbird models, including Legend ID40, Piranha series, Matrix series, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and Dimensions\u003c\/h3\u003e\u003cp\u003eThe XP-9-20-T In-Hull Puck Transducer is compatible with a wide range of Humminbird fish finders, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLegend ID40\u003c\/li\u003e\n\u003cli\u003ePiranha 5, PiranhaMax 10, PiranhaMax 15, PiranhaMax 20\u003c\/li\u003e\n\u003cli\u003eMatrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97\u003c\/li\u003e\n\u003cli\u003eFF515, FF535, FF565\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePractical Design for Seamless Integration\u003c\/h3\u003e\u003cp\u003eMeasuring compactly for easy installation, the XP-9-20-T is designed to be mounted inside the hull of your boat. This positioning not only protects the transducer from potential damage caused by underwater hazards but also ensures consistent performance in various marine conditions. The in-hull design also reduces drag, contributing to smoother boat operation.\u003c\/p\u003e\u003ch3\u003eSafe and Environmentally Conscious\u003c\/h3\u003e\u003cp\u003eThis product is constructed with high-quality materials and adheres to safety standards. However, please note that it contains chemicals, including lead, which are known to the State of California to cause cancer and reproductive harm. For more information, please visit \u003ca href=\"http:\/\/P65Warnings.ca.gov\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Humminbird","offers":[{"title":"Default Title","offer_id":51550418665718,"sku":"APL303516","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0718423_apl303516.jpg?v=1787794380"},{"product_id":"apl440308","title":"Airmar - B60 50\/200 Khz 12DEG Tilted Element Transducers","description":"\u003ch4\u003eReliable Depth and Temperature Monitoring for Marine Use\u003c\/h4\u003e\u003cp\u003eThe Airmar B60 50\/200 kHz 12° Tilted Element transducer is designed for accurate depth and temperature readings, making it an essential tool for marine navigation and fishing. Engineered with a built-in deadrise compensation, this transducer provides a vertical beam without requiring a fairing, ensuring precise echo returns for enhanced depth detection. Its streamlined, nearly flush housing minimizes drag, making it an excellent choice for boaters seeking performance without added resistance.\u003c\/p\u003e\u003ch4\u003ePowerful Dual-Frequency Performance\u003c\/h4\u003e\u003cp\u003eOperating at both 50 kHz and 200 kHz, the Airmar B60 transducer offers versatility for different depth ranges. The 600 W RMS power output ensures strong and reliable signal transmission, making it suitable for mid-performance applications. Whether navigating shallow or deeper waters, this transducer delivers dependable results.\u003c\/p\u003e\u003ch4\u003eDurable and Efficient Design\u003c\/h4\u003e\u003cp\u003eConstructed from high-quality bronze, the Airmar B60 is built to withstand harsh marine environments. Its robust housing ensures longevity and durability, making it a reliable choice for boat owners. The transducer features a Lowrance Blue connector, ensuring seamless compatibility with compatible Lowrance fishfinders and chart plotters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDepth and temperature monitoring for enhanced navigation\u003c\/li\u003e\n\u003cli\u003eDual-frequency operation (50\/200 kHz) for versatile performance\u003c\/li\u003e\n\u003cli\u003e600 W RMS power output for strong signal transmission\u003c\/li\u003e\n\u003cli\u003eTilted element design for built-in deadrise compensation\u003c\/li\u003e\n\u003cli\u003eNearly flush bronze housing minimizes drag\u003c\/li\u003e\n\u003cli\u003eCompatible with Lowrance Blue connector systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":51550439375094,"sku":"APL440308","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0834119_apl440308.png?v=1787794675"},{"product_id":"apl748117","title":"Th Marine 1 1\/2 Recessed Th-Hull Scpr (Rfth-2B-Dp)","description":"\u003cp\u003e1 1\/2 RECESSED TH-HULL SCPR (RFTH-2B-DP)\u003c\/p\u003e","brand":"T-H Marine","offers":[{"title":"Default Title","offer_id":51550443897078,"sku":"APL748117","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1113947_apl748117jpg.jpg?v=1787794906"},{"product_id":"apl815079","title":"Garmin Reactor 40 Course Computer Unit, For Viking VIPER, NMEA 2000","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11052-66 is a Course Computer Unit (CCU) for a Reactor 40 Steer-by-Wire autopilot system installed on boats with a Viking VIPER steer-by-wire steering setup. It contains the sensors the autopilot uses to track heading and rate of turn, and it ties into both the steering system and your NMEA 2000 network.\u003c\/p\u003e\u003cp\u003ePlan the install around cable reach and clean sensor placement: the CCU-to-steering cable is 3 m (9 ft.) long and is not meant to be cut. NMEA 2000 backbone power for the autopilot network is 9 to 16 VDC, so 24 V boats typically feed the backbone from a regulated 12 V supply.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCourse Computer Unit for Reactor 40 Steer-by-Wire autopilot systems used with Viking VIPER steer-by-wire steering\u003c\/li\u003e\n\u003cli\u003eSenses heading and rate of turn for the autopilot to steer accurately\u003c\/li\u003e\n\u003cli\u003eConnects to the boat steering controller CAN bus and to the NMEA 2000 network for control and data sharing\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 backbone power requirement: 9 to 16 VDC\u003c\/li\u003e\n\u003cli\u003eCCU cable to the steering system is 3 m (9 ft.) and must not be cut; longer runs use an extension cable\u003c\/li\u003e\n\u003cli\u003eMounts in any orientation in a non-submerged area; placement near the boat’s center of rotation helps sensor performance\u003c\/li\u003e\n\u003cli\u003eMounting screws are supplied; alternate hardware should be stainless or brass and checked with a handheld compass for magnetic effect\u003c\/li\u003e\n\u003cli\u003eDielectric grease on the cable connector pin holes helps prevent corrosion in saltwater installs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis CCU is intended for Reactor 40 Steer-by-Wire installations on Viking yachts equipped with a Viking VIPER steer-by-wire steering system. It connects on NMEA 2000 to communicate with a Garmin helm control such as the GHC 20, and it can also be configured and controlled from a compatible Garmin chartplotter when no dedicated helm control is installed.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm your boat has the VIPER steer-by-wire steering controller interface used by the Reactor 40 steer-by-wire system, and confirm you have an available spot on the NMEA 2000 backbone for another T-connector and drop.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the CCU on a rigid surface in a non-submerged location, as close as practical to the boat’s center of rotation. It can be mounted in any orientation, but it needs a clean magnetic environment to read correctly.\u003c\/p\u003e\u003cp\u003eKeep the mounting area clear of magnetic and electrical noise sources: avoid locations within 60 cm (2 ft.) of iron, magnets, high-current wiring, or pumps that cycle on and off, and keep large speaker magnets at least 1.5 m (5 ft.) away. A handheld compass check at the mounting point is a practical way to catch interference before you drill.\u003c\/p\u003e\u003cp\u003eRoute the CCU cable to the steering system connection or CAN bus and protect the connector with dielectric grease, especially on saltwater boats. Leave strain relief and a service loop so the cable is not pulling on the connector when the boat is pounding or vibrating.\u003c\/p\u003e\u003ch6\u003eElectrical and network integration\u003c\/h6\u003e\u003cp\u003eThe autopilot network runs on NMEA 2000, which should be powered from 9 to 16 VDC through a switch or the boat’s ignition circuit so the network does not sit on the battery when the boat is off. Only one power feed should be used on a given NMEA 2000 backbone.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical replacement part when a Viking VIPER Reactor 40 steer-by-wire system needs a CCU swap, or when you are building out a steer-by-wire autopilot setup and already have the rest of the system. It fits boats that spend hours on long runs, troll for extended stretches, or want steadier steering while managing lines and electronics at the helm.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf you add speakers, amplifiers, or heavy wiring after the install, it is worth re-checking the CCU area for magnetic interference. Keeping connectors clean, dry, and protected helps avoid intermittent steering and sensor faults in wet, salty compartments.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550444290294,"sku":"APL815079","price":6499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715504_apl815079.jpg?v=1787794926"},{"product_id":"apl704569","title":"Lowrance - TotalScan Thru Hull Transducer Low\/Hi Chirp, DownScan, StructureScan HD","description":"\u003ch4\u003eYour Underwater Eyes: The TotalScan Thru Hull Transducer\u003c\/h4\u003e\n\u003cp\u003eUnveiling the \u003cstrong\u003eTotalScan Thru Hull Transducer\u003c\/strong\u003e—your all-seeing sonar companion for unprecedented underwater exploration. Engineered for supreme clarity and detailed imaging, this transducer is the epitome of marine technological advancements. With the TotalScan Thru Hull Transducer, you're not just navigating; you're perceiving the underwater world with enriched detail and improved recognition.\u003c\/p\u003e\n\u003ch4\u003eEngineered for Excellence: Technical Specifications\u003c\/h4\u003e\n\u003cp\u003eThe TotalScan Thru Hull Transducer is no ordinary sonar accessory; it's a comprehensive underwater scanner that combines Low and High CHIRP frequencies along with DownScan™ Imaging and StructureScan™ capabilities. The versatility of this single transducer is unparalleled as it adjusts to flat to hull mounting or even adapts to deadrises up to 5 degrees with a fairing block. Uncover what lies beneath with precise and crystal clear imaging brought to you by TotalScan.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-inclusive transducer offering Broadband, CHIRP, StructureScan HD and DownScan Imaging™\u003c\/li\u003e\n\u003cli\u003eOperates on 50\/200kHz for Broadband sonar capabilities\u003c\/li\u003e\n\u003cli\u003eEmploys Low and High CHIRP frequencies for enhanced details\u003c\/li\u003e\n\u003cli\u003eSupports 455\/800kHz StructureScan® frequencies for an extensive underwater view\u003c\/li\u003e\n\u003cli\u003eIntegrated Water Temperature sensor for a well-informed voyage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePerfectly Scaled: Product Dimensions\u003c\/h4\u003e\n\u003cp\u003eEmbedding such profound technology into a compact design, the TotalScan Thru Hull Transducer is a masterpiece of form and function. Please note, the general dimensions will be provided upon request, ensuring a perfect fit for your vessel.\u003c\/p\u003e\n\u003ch4\u003eA New Spectrum of Clarity: Color Temperature\u003c\/h4\u003e\n\u003cp\u003eAlthough not directly related to color temperature in the lighting sense, the clarity and distinction of underwater structures and contours provided by the TotalScan Transducer unveil a new spectrum of recognition, making your marine expedition safer and more rewarding.\u003c\/p\u003e\n\u003ch4\u003eAdmire the Finish: Finishes\u003c\/h4\u003e\n\u003cp\u003eThe robust and refined finish of the TotalScan Thru Hull Transducer is meticulously crafted to withstand the harsh marine environment while complementing the sleek design of your vessel. Its aesthetic and functional design is a testament to its superior quality.\u003c\/p\u003e\n\u003ch4\u003eBeyond the Surface: Highlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUnmatched underwater clarity with High CHIRP frequencies\u003c\/li\u003e\n\u003cli\u003eComprehensive imaging through Broadband, CHIRP, StructureScan HD and DownScan Imaging™\u003c\/li\u003e\n\u003cli\u003eAdaptive mounting compatibility with flat to hull mounting or deadrises up to 5 degrees\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550447993078,"sku":"APL704569","price":769.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697699_apl704569_jpeg.jpg?v=1787794996"},{"product_id":"apl454377","title":"Garmin Airmar B75L Bronze Thru-Hull Transducer, 40-75 kHz, 300W, 8-Pin, 0° Tilt, 0-7° Deadrise, Depth\/Temp","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11635-20 is a bronze thru-hull transducer that runs in the low CHIRP band (40-75 kHz) and outputs 300 W for depth and water-temperature data on compatible Garmin sonar electronics. It uses a 0° tilted element for 0-7° hull deadrise at the install point, with a beamwidth of about 32° to 21° (-3 dB).\u003c\/p\u003e\u003cp\u003eThe low-profile thru-hull housing sits flush to keep drag down and helps hold bottom at speed when the install location stays in solid water flow. Bronze thru-hulls are typically used on fiberglass and wood hulls; match the housing material to your hull and underwater metals to avoid corrosion issues.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLow CHIRP 40-75 kHz band for strong bottom tracking in deeper water\u003c\/li\u003e\n\u003cli\u003e300 W power rating\u003c\/li\u003e\n\u003cli\u003e0° tilted element fits 0-7° hull deadrise at the mounting surface\u003c\/li\u003e\n\u003cli\u003eBeamwidth 32° to 21° (-3 dB) for coverage that stays useful as depth changes\u003c\/li\u003e\n\u003cli\u003eProvides depth and fast-response water-temperature sensing\u003c\/li\u003e\n\u003cli\u003eGarmin 8-pin connector for compatible Garmin sonar connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003ePlan this as a thru-hull installation through solid fiberglass or wood with enough flat area for the mushroom head to sit cleanly. The 0° tilt version is meant for near-flat running surfaces with 0-7° deadrise where it mounts; if the hull angle is steeper at that spot, the beam points off to the side and bottom readings can suffer.\u003c\/p\u003e\u003cp\u003eIt uses a Garmin 8-pin plug, so confirm your chartplotter, sounder module, or adapter cable is the Garmin 8-pin style before drilling the hull.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThru-hull transducers work best when they see water that stays free of bubbles and aeration. Mount it away from steps, strakes, intakes, and other fittings that can feed turbulence, and make sure you have bilge access for tightening and sealing.\u003c\/p\u003e\u003cp\u003eBed the housing with a marine sealant appropriate for below-the-waterline fittings, and re-check the nut and seal after the first few trips once everything has settled.\u003c\/p\u003e\u003ch6\u003eElectronics and sonar integration\u003c\/h6\u003e\u003cp\u003ePair it with a CHIRP-capable Garmin sonar to use the 40-75 kHz band. In traditional sonar modes, the same transducer still supplies depth and temperature information.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for offshore anglers and cruisers who want low-frequency CHIRP coverage and prefer a flush thru-hull install over a transom mount that can ventilate at speed. It also suits boats that regularly run deeper coastal water where the low band holds bottom better than higher frequencies.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep marine growth off the face for consistent readings, and avoid hard scraping that can damage the sensing surface. During haul-out, inspect the bedding seal and the bronze body for any weeping or early corrosion so issues are caught before the next season.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51550466932982,"sku":"APL454377","price":699.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281770_apl100855.webp?v=1787792022"},{"product_id":"apl766225","title":"Airmar ST800PV-N2 NMEA 2000 Speed \u0026 Temp Transducer ST800PV-N2","description":"\u003cp\u003e\u003cstrong\u003eST800PV-N2 NMEA 2000 Speed \u0026amp; Temp Transducer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ST800 speed and temperature sensor process digital signals inside the thru-hull housing. Then this Smart™ Sensor sends data to a chart plotter, radar screen, or digital display in either analog or NMEA 2000® format. These low-profile units are nearly flush, minimizing drag with only 5 mm (3\/16\") extending outside of the hull.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed and fast-response water-temperature sensing\u003c\/li\u003e\n\u003cli\u003eSpeed range from 2 to 45 knots (2 to 52 MPH)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 or NMEA 0183 analog output\u003c\/li\u003e\n\u003cli\u003eRetractable insert in a low-profile housing with a water valve\u003c\/li\u003e\n\u003cli\u003eAvailable in a plastic (P120) or bronze (B120) housing\u003c\/li\u003e\n\u003cli\u003eAirmar's Smart™ Sensor technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlastic: 0.7 kg (1.4 lb.)\n\u003cul\u003e\n\u003cli\u003eBronze: 1.3 kg (2.8 lb.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHull Material: Plastic: Fiberglass or metal\/Bronze: Fiberglass or wood\u003c\/li\u003e\n\u003cli\u003eHole Diameter: 51 mm or 2\"\u003c\/li\u003e\n\u003cli\u003eSpeed Range: 2 to 45 knots (2 to 52 MPH)\u003c\/li\u003e\n\u003cli\u003eWater Temperature: Range: -10 to 40°C (14 to 104°F)\/ Accuracy: ±0.5°C (±1.8°F)\u003c\/li\u003e\n\u003cli\u003ePressure Rating: 3 m (10')\u003c\/li\u003e\n\u003cli\u003eData: Output Protocol: NMEA 0183 or NMEA 2000\/Update Rate: 1 time\/s\u003c\/li\u003e\n\u003cli\u003ePower: Supply Voltage: 9 to 16 VDC\/Supply Current: \u0026lt;200 mA\/NMEA 2000 Load Equivalency Number (LEN): 2\u003c\/li\u003e\n\u003cli\u003eStandard Cable Length: NMEA 2000: 6 m (20')\/NMEA 0183: 9 m (30')\u003c\/li\u003e\n\u003cli\u003eIncludes: Blanking plug\u003c\/li\u003e\n\u003cli\u003eCertifications and Standards: CE, IEC60945\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":51550484660470,"sku":"APL766225","price":376.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1116684_apl766225jpg.jpg?v=1787795480"},{"product_id":"apl926521","title":"Airmar - SS175C-0-MW 0d Tilt Medium CHIRP Transducer","description":"\u003ch4\u003eHigh-Performance CHIRP Technology for Superior Marine Navigation\u003c\/h4\u003e\u003cp\u003eThe Airmar SS175MW is an advanced CHIRP-ready transducer designed for anglers and mariners who demand precision and efficiency in mid-depth waters. Featuring a 1 kW power rating and medium-frequency operation (60-100 kHz), this transducer provides excellent target separation and superior coverage under the vessel. Its ultra-wide beamwidth, ranging from 57° to 73° port-starboard and an average of 16° fore-aft, maximizes target detection, making it ideal for locating pelagic species.\u003c\/p\u003e\u003cp\u003eThe 0° tilted element ensures a flush mount installation on hulls with a deadrise between 0° and 7°, optimizing echo returns for accurate depth readings. Equipped with AIRMAR’s exclusive Xducer ID® technology, the SS175MW offers seamless integration with compatible marine electronics. Additionally, its stainless steel housing and durable acoustic window ensure long-lasting performance in diverse marine environments.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Rating:\u003c\/strong\u003e 1 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Depth:\u003c\/strong\u003e 400 m (1,300')\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Frequency Range:\u003c\/strong\u003e 60-100 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeamwidth:\u003c\/strong\u003e 57° to 73° (Port\/Starboard) x 16° average (Fore\/Aft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Style:\u003c\/strong\u003e Tilted Element Thru-Hull\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunctions:\u003c\/strong\u003e Depth and temperature sensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Window:\u003c\/strong\u003e Urethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing Material:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Deadrise Angle:\u003c\/strong\u003e 24°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHull Compatibility:\u003c\/strong\u003e Suitable for all hull materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Vessel Length:\u003c\/strong\u003e Up to 11 m (36')\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 9 m (30')\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Temperature Range:\u003c\/strong\u003e -10° to 40°C (14° to 104°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.7 kg (6 lb.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Size for Installation:\u003c\/strong\u003e 95 mm (3-3\/4\")\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransducer Weight:\u003c\/strong\u003e 2.7 kg (6 lb.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 9 m (30')\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Wide Medium CHIRP Coverage:\u003c\/strong\u003e Provides superior mid-depth performance and enhanced fish-target separation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilted Element for Optimal Installation:\u003c\/strong\u003e Ensures maximum signal return with a flush-mount design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Power \u0026amp; Depth Capabilities:\u003c\/strong\u003e Tracks depths up to 400 meters with a 1 kW power output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Stainless Steel Construction:\u003c\/strong\u003e Built for longevity in harsh marine conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Response Temperature Sensor:\u003c\/strong\u003e Delivers real-time water temperature readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExclusive Xducer ID® Technology:\u003c\/strong\u003e Allows for seamless integration with compatible marine electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAvailable Variations\u003c\/h4\u003e\u003cp\u003eThe SS175MW transducer comes in multiple variations to accommodate different marine electronic systems. Each variation features a specific connector type for seamless compatibility:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-MM:\u003c\/strong\u003e Airmar 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-0:\u003c\/strong\u003e Bare Wire Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-10F:\u003c\/strong\u003e Furuno 10-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-12F:\u003c\/strong\u003e Furuno 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-12G:\u003c\/strong\u003e Garmin 12-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-8G:\u003c\/strong\u003e Garmin 8-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-14HB:\u003c\/strong\u003e Humminbird 14-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-21HB:\u003c\/strong\u003e Humminbird 21-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-HB:\u003c\/strong\u003e Humminbird 9-Pin Connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSS175C-0-MW-11R:\u003c\/strong\u003e Raymarine 11-Pin Connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Airmar SS175MW is the ideal solution for serious anglers and boaters looking to enhance their sonar capabilities with cutting-edge CHIRP technology and wide underwater coverage.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Furuno 10-Pin","offer_id":51550491443446,"sku":"APL926521-0","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Airmar 12-Pin","offer_id":51550491476214,"sku":"APL926521-2","price":2164.99,"currency_code":"USD","in_stock":true},{"title":"Bare Wire","offer_id":51550491508982,"sku":"APL926521-8","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Garmin 12-Pin","offer_id":51550491541750,"sku":"APL926521-5","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Humminbird 21-Pin","offer_id":51550491574518,"sku":"APL926521-7","price":2299.99,"currency_code":"USD","in_stock":false},{"title":"Humminbird 9-Pin","offer_id":51550491607286,"sku":"APL926521-4","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Furuno 12-Pin","offer_id":51550491640054,"sku":"APL926521-9","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Raymarine 11-Pin","offer_id":51550491672822,"sku":"APL926521-3","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Humminbird 14-Pin","offer_id":51550491705590,"sku":"APL926521-1","price":2299.99,"currency_code":"USD","in_stock":true},{"title":"Garmin 8-Pin","offer_id":51550491738358,"sku":"APL926521-6","price":2299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0838834_apl145239.png?v=1787792758"},{"product_id":"apl987625","title":"SI-TEX GPS Chart-Dual Frequency 600W Sonar System - 8\" Color LCD w\/Internal \u0026 External GPS Antenna \u0026 C-MAP 4D Card SVS-880CFE+","description":"\u003cp\u003e\u003cstrong\u003eGPS Chart-Dual Frequency 600W Sonar System - 8” Color LCD with Internal \u0026amp; External GPS Antenna \u0026amp; C-MAP 4D Card\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SI-TEX SVS-880CFE+ is a powerful big-screen performer designed to fit every boat and budget. This compact chartplotter and chartplotter\/sonar system delivers the goods for any vessel, from center console skiffs to sailboats to light commercial boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDifferences between SVS-880CFE \u0026amp; SVS-880CFE+\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SVS-880CFE+ has an updated Android processor and only uses C-MAP 4D cartridges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInternal and external GPS antenna\u003c\/li\u003e\n\u003cli\u003e8\" high-resolution color LCD and compact case\u003c\/li\u003e\n\u003cli\u003e52-channel GPS\u003c\/li\u003e\n\u003cli\u003e\"Dual fuel\" charting the C-MAP and Navionics cartography Pre-loaded w\/Navionics Gold North American Chart Card\u003c\/li\u003e\n\u003cli\u003eGlobal GPS compatibility\u003c\/li\u003e\n\u003cli\u003e600-watt dual frequency 50\/200 kHz Digital Echo Sounder\u003c\/li\u003e\n\u003cli\u003eBrilliant LED backlighting provides excellent sunlight readability\u003c\/li\u003e\n\u003cli\u003eEasy, intuitive operation and control\u003c\/li\u003e\n\u003cli\u003eVideo input for underwater and on-deck cameras\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay Screen SVS-880CFE+: 8-inch Color LCD with LED backlight\u003c\/li\u003e\n\u003cli\u003eResolution SVS-880CFE+: SVGA (800 x 600 pixels)\u003c\/li\u003e\n\u003cli\u003ePower Supply: DC 12V-36V(±10%) SVS-880: 4W(without sonar)\/ 6W(with sonar\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: Display Unit -15 degrees C to +50 degrees C, Antenna Unit -25 degrees C to +70 degrees C\u003c\/li\u003e\n\u003cli\u003ePerformance Standard: IMO Resolution MSC.112(73)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eChartplotter Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay Method: Mercator Projection\u003c\/li\u003e\n\u003cli\u003eDisplay Mode: True motion \/ N\/S\/E\/W up \/ Course up \/ Head up\u003c\/li\u003e\n\u003cli\u003eLatitude Limits: Between 85 degrees N to 85 degrees S\u003c\/li\u003e\n\u003cli\u003eMap Scale: 0.05nm to 1500nm\u003c\/li\u003e\n\u003cli\u003eMap Datum: WGS-84 6\u003c\/li\u003e\n\u003cli\u003eWaypoints: 20,000 points *Total of 16 colors and 16 icons are selectable for each point with a name tag (6 alphanumeric characters)\u003c\/li\u003e\n\u003cli\u003eTrack Points: 50,000 points (2 types)\u003c\/li\u003e\n\u003cli\u003eRoute: Max capacity 100 Routes *20 WPTs per each Route. Each with name tags (8 alphanumeric characters)\u003c\/li\u003e\n\u003cli\u003eDraw Point: 1,000 points\u003c\/li\u003e\n\u003cli\u003eArea Name: 1,000 points\u003c\/li\u003e\n\u003cli\u003eChart Data: Standard w\/Navionics Gold C-MAP MAX optional\u003c\/li\u003e\n\u003cli\u003eOutput Data: NMEA-0183\u003c\/li\u003e\n\u003cli\u003eInput Data: NMEA-0183\u003c\/li\u003e\n\u003cli\u003eAlarm Arrival, Anchor, XTE, Interval timer, Userline\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGPS Receiver Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGNSS Receiver Capabilities: GPS - L1 C\/A code, GLONASS - L1OF\/, QZSS - L1 C\/A code, Galileo - E1B\/E1C\/L1\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 52 channels\u003c\/li\u003e\n\u003cli\u003eHorizontal Positioning Accuracy: Autonomous 2.5m (CEP 50%)\u003c\/li\u003e\n\u003cli\u003eSensitivity: Acquisition -148 dBm, Tracking -165 dBm, Reacquisition -162 dBm, Nav Update 1Hz, 5Hz)\u003c\/li\u003e\n\u003cli\u003eSupport: DGPS, SBAS (EGNOS,WAAS, MASA, GAGAN)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSonar Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay Mode: Normal (single\/dual-frequency), Bottom-lock. Bottom-zoom, A-scope\u003c\/li\u003e\n\u003cli\u003eFrequency 50 and 200 KHz (single or dual)\u003c\/li\u003e\n\u003cli\u003eOutput Power: 600W\u003c\/li\u003e\n\u003cli\u003eRange Speed: 600W - 2.5m - 600m\u003c\/li\u003e\n\u003cli\u003eImage Speed: Fixed 8 speeds (4\/1, 2\/1, 1\/1, 1\/2, 1\/4, 1\/8, 1\/16, 1\/32) and stop\u003c\/li\u003e\n\u003cli\u003eRejection: Interference rejection: 3 levels, Noise rejection: 4 levels\u003c\/li\u003e\n\u003cli\u003eFunction: Gain(auto\/manual), Range(auto\/manual), Shift(auto\/manual), White\/Black line Support speed sensor, Water temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SI-TEX","offers":[{"title":"Default Title","offer_id":51550503207158,"sku":"APL987625","price":1649.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1101981_apl987625jpg.jpg?v=1787795673"},{"product_id":"apl290028","title":"Furuno - NMEA 2000 Junction Box","description":"\u003ch4\u003eDive Deeper with the Ultimate NMEA2000 Junction Box\u003c\/h4\u003e\n\u003cp\u003ePresenting the FI5002, a certified NMEA2000 Junction Box, designed to streamline your marine electronics experience. This device acts as a pivotal connection point, ensuring efficient communication between various marine components, all while staying true to the NMEA2000 standards.\u003c\/p\u003e\n\u003ch4\u003eKey Technical Insights\u003c\/h4\u003e\n\u003cp\u003eWith an intricate design tailored to support both 12VDC and 24VDC networks, the FI5002 establishes itself as a versatile utility. Whether you're looking for backbone connectivity or need to connect multiple peripherals, it's got you covered.\u003c\/p\u003e\n\u003c!-- Color Temperature would go here if applicable, but since it's not provided, we'll skip it --\u003e\n\u003ch4\u003eShimmering Finishes\u003c\/h4\u003e\n\u003cp\u003eThe FI5002 doesn't just perform; it shines! (Please provide the finishes available or state that it comes in the standard marine finish.)\u003c\/p\u003e\n\u003ch4\u003eWhy FI5002 Stands Out\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2 dedicated NMEA2000 backbone ports for seamless communication.\u003c\/li\u003e\n\u003cli\u003e6 versatile NMEA2000 ports to cater to multiple device connections.\u003c\/li\u003e\n\u003cli\u003ePower-efficient! Consumes less than 2A in a 12VDC system.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Furuno","offers":[{"title":"Default Title","offer_id":51550522900726,"sku":"APL290028","price":296.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0696761_apl290028_jpeg.jpg?v=1787795951"},{"product_id":"apl309254","title":"Aqua-Vu HD7i 125 1080p HD Camera System 200-5163","description":"\u003cp\u003e\u003cstrong\u003eHD7i 125 1080p HD Camera System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the HD7i 125 Gen2 with full 1080p HD resolution and image-clarifying True-Color technology, plus battery power saver mode. Outfitted with Aqua-Vu’s modular XD Camera with quick attach, the HD7i 125 High-Definition Underwater Viewing System displays rich, colorful underwater video on a dynamic and spacious 7-inch Daylight Viewable LCD. The XD Camera includes 125 feet of durable cable with high-intensity, adjustable IR lighting and is compatible with all Aqua-Vu XD accessories (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7\" super bright (2200 nits), daylight-viewable LCD\u003c\/li\u003e\n\u003cli\u003eModular XD camera housing with quick attachment accessory system\u003c\/li\u003e\n\u003cli\u003eGen2 HD 1080p color high-definition XD camera\u003c\/li\u003e\n\u003cli\u003eOpti-RX lab-quality lens for ultimate clarity\u003c\/li\u003e\n\u003cli\u003e125 feet of cable\u003c\/li\u003e\n\u003cli\u003eDepth (marked on cable)\u003c\/li\u003e\n\u003cli\u003eSuper Low-Light Vu™ Technology\u003c\/li\u003e\n\u003cli\u003eHigh-intensity, adjustable IR lighting\u003c\/li\u003e\n\u003cli\u003eHDMI video output\u003c\/li\u003e\n\u003cli\u003eIP67 waterproof, heated LCD\u003c\/li\u003e\n\u003cli\u003eBoat-ready \/ RAM Mount compatible\u003c\/li\u003e\n\u003cli\u003e12v 9Ah battery\u003c\/li\u003e\n\u003cli\u003eGEN 2 features \"Power Saving Mode\" with up to 6 hours of run time\u003c\/li\u003e\n\u003cli\u003eSmart battery charger\u003c\/li\u003e\n\u003cli\u003eCustom soft carry bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aqua-Vu","offers":[{"title":"Default Title","offer_id":51550526308598,"sku":"APL309254","price":999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1278777_apl309254.jpg?v=1787796005"},{"product_id":"apl143996","title":"Faria Chesapeake White SS 2\" Depth Sounder w\/ Transom Mount Transducer 13850","description":"\u003cp\u003e\u003cstrong\u003eChesapeake White SS 2\" Depth Sounder with Transom Mount Transducer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel and domed glass lens.\u003c\/p\u003e\n\u003cp\u003eThe Depth Sounders from Faria offer a 3-199 foot (1-61 meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.\u003c\/p\u003e\n\u003cp\u003eDepth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.\u003c\/p\u003e\n\u003cp\u003eComes with Faria SN2011 transom mount transducer w\/25' cable.\u003c\/p\u003e\n\u003cp\u003e2\" - Hole Size: 2.0625\" (53mm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual Scale - Imperial and Metric\u003c\/li\u003e\n\u003cli\u003eDomed Glass Anti-fog, Scratch Resistant Lens\u003c\/li\u003e\n\u003cli\u003eStainless Steel White Bezel\u003c\/li\u003e\n\u003cli\u003e199 Foot (61m) Depth Capability\u003c\/li\u003e\n\u003cli\u003eAudible and Visual alarm for Shallow\/Deep Water Conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFactory P\/N DS0110\u003c\/p\u003e\n\u003cp\u003e*Sold as an Individual\u003c\/p\u003e\n\u003cp\u003e**Gauge Cover not Included\u003c\/p\u003e\n\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Faria Beede Instruments","offers":[{"title":"Default Title","offer_id":51550530437366,"sku":"APL143996","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1098800_apl143996jpg.jpg?v=1787796162"},{"product_id":"apl939047","title":"Airmar - B175C-20-L Thru Hull 20 Deg Tilt Mix-N-Match","description":"\u003ch4\u003ePrecision and Power for Deep-Water Fishing and Navigation\u003c\/h4\u003e\u003cp\u003eThe Airmar B175C-20-L Thru-Hull Transducer is designed for serious anglers and marine enthusiasts who require exceptional depth penetration and target resolution. Engineered with a 20-degree tilt, this transducer optimizes performance for vessels with moderate deadrise hulls, ensuring an accurate sonar return with minimal interference. Whether navigating coastal waters or exploring deep offshore locations, this high-performance transducer provides crisp, detailed imaging to enhance situational awareness and fishing success.\u003c\/p\u003e\u003ch4\u003eAdvanced Technical Capabilities for Superior Clarity\u003c\/h4\u003e\u003cp\u003eBuilt for demanding marine applications, the B175C-20-L operates with cutting-edge CHIRP technology, delivering a broad frequency range for enhanced target separation and clarity. Its high-sensitivity elements ensure reliable performance in varying water conditions, making it an essential tool for both recreational and professional marine use.\u003c\/p\u003e\u003ch4\u003eRugged and Reliable Construction\u003c\/h4\u003e\u003cp\u003eCrafted for durability, the Airmar B175C-20-L features a robust thru-hull design that withstands harsh marine environments. Its high-quality build ensures long-term reliability while minimizing drag and turbulence.\u003c\/p\u003e\u003ch4\u003eKey Features and Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHIRP Technology:\u003c\/strong\u003e Provides superior depth penetration and enhanced fish-target resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20° Tilted Element:\u003c\/strong\u003e Ideal for hulls with moderate deadrise, ensuring optimal sonar returns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-Water Performance:\u003c\/strong\u003e Capable of detecting targets at significant depths with precision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Thru-Hull Installation:\u003c\/strong\u003e Designed for long-term marine use with a secure, low-profile mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix-N-Match Compatibility:\u003c\/strong\u003e Allows for seamless integration with various marine electronics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis premium transducer is an excellent choice for those who demand high-resolution sonar imaging and reliability on the water.\u003c\/p\u003e","brand":"Airmar","offers":[{"title":"Default Title","offer_id":51550538858742,"sku":"APL939047","price":1664.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0838678_apl174068.png?v=1787796310"},{"product_id":"apl825174","title":"Lowrance B285H-W High Wide Bronze Thru-Hull 9-Pin 000-14562-001","description":"\u003cp\u003e\u003cb\u003eLowrance B285H-W High Wide\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eModel: 000-14562-001\u003c\/p\u003e\n\u003cp\u003eGet more coverage under the boat with Airmar's wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° Beamwidth, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the single band, wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducers. A unique property of the high frequency transducers is that the Beamwidth is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.\u003c\/p\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550542332150,"sku":"APL825174","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1115034_apl825174jpg.jpg?v=1787796354"},{"product_id":"apl144130","title":"Faria Chesapeake White SS 2\" Dual Depth \u0026 Temp Sounder w\/Transom Mount Transducer 13852","description":"\u003cp\u003e\u003cstrong\u003eChesapeake White SS 2\" Dual Depth \u0026amp; Temp Sounder w\/Transom Mount Transducer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel and domed glass lens.\u003c\/p\u003e\n\u003cp\u003eThe Depth Sounders from Faria offer a 3-199 foot (1-61 meters) depth capability, with an automatic gain control, backlighting for maximum night vision, keel offset, and deep and shallow water alarms.\u003c\/p\u003e\n\u003cp\u003eDepth can be read in meters, and feet. With its oversized back-lit display depth can be easily read in any condition. Audible and Visual alarms let the boater know when a shallow or deep water condition exists.\u003c\/p\u003e\n\u003cp\u003eDual Temperature Depth Sounder can display outside air temperatures, bait well or external water water temperatures from 0° C to 100° C (32° F to 200° F)\u003c\/p\u003e\n\u003cp\u003eComes with Faria SN2011 transom mount transducer w\/25' cable and Faria TS0101 Air Temp. Sender w\/25' cable.\u003c\/p\u003e\n\u003cp\u003e2\" - Hole Size: 2.0625\" (53mm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual Scale - Imperial and Metric\u003c\/li\u003e\n\u003cli\u003eDomed Glass Anti-fog, Scratch Resistant Lens\u003c\/li\u003e\n\u003cli\u003eStainless Steel Bezel\u003c\/li\u003e\n\u003cli\u003e199 Foot (61m) Depth Capability\u003c\/li\u003e\n\u003cli\u003eAudible and Visual alarm for Shallow\/Deep Water Conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFactory P\/N DS1004\u003c\/p\u003e\n\u003cp\u003e*Sold as an Individual\u003c\/p\u003e\n\u003cp\u003e**Gauge Cover not Included\u003c\/p\u003e\n\u003cstrong\u003eThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e","brand":"Faria Beede Instruments","offers":[{"title":"Default Title","offer_id":51550551408886,"sku":"APL144130","price":445.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1098802_apl144130jpg.jpg?v=1787796444"},{"product_id":"apl076393","title":"Lowrance - B117 0° 50\/200kHz Thru-Hull Depth\/Temp with Blue Connector - 600W","description":"\u003ch4\u003eDiscover the New Dimension of Marine Exploration\u003c\/h4\u003e\n\u003cp\u003eDive deep into the world of marine exploration with the B117 Bronze Thru-Hull Low-Profile 600 W Blue Connector. Designed meticulously for both powerboats with planing hulls and sailboats, this is the unparalleled industry standard when it comes to low-profile transducers.\u003c\/p\u003e\n\u003ch4\u003eTechnical Wonders Beneath The Waves\u003c\/h4\u003e\n\u003cp\u003eExperience excellent target detail in shallow waters at 200kHz and remain confident with efficient deep-water bottom tracking at 50kHz. Added features like the depth, temperature, and an optional temperature sensor ensure you have all the data you need for smooth sailing.\u003c\/p\u003e\n\u003ch4\u003eA Palette of Bronze Elegance\u003c\/h4\u003e\n\u003cp\u003eOur bronze housing not only promises durability but also exudes an aura of sophistication. Whether it's for a boat that's 8M (25') or larger, this product is engineered to complement your marine equipment seamlessly.\u003c\/p\u003e\n\u003ch4\u003eNoteworthy Features to Sail Through\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle cable exit ensures minimal headroom consumption and offers protection especially when the transducer is accidentally stepped on.\u003c\/li\u003e\n\u003cli\u003eOur included rubber washer stands out as it allows you to tighten the hull nut even on irregular hull surfaces.\u003c\/li\u003e\n\u003cli\u003eStay assured of safety as our housings are ABYC H-27 compliant.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lowrance","offers":[{"title":"Default Title","offer_id":51550563631350,"sku":"APL076393","price":319.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0697413_apl076393_jpeg.jpg?v=1787796536"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/collections\/5d745d7a-1809-437e-94bd-86349812d297.webp?v=1790829166","url":"https:\/\/www.apollolighting.com\/collections\/cat-sonar.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}