{"title":"Underwater Lights Accessories","description":"","products":[{"product_id":"apl717260","title":"Lumishore Lux SL\/SNL Strip Light Power Extension Cable, 1 m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-14455-00 is a 1 m power extension cable for Lux SL\/SNL strip light installations. It’s used when the factory lead does not quite reach the power feed or driver location, so you can keep the run clean without cutting and re-terminating wiring.\u003c\/p\u003e\u003cp\u003eOn boats, this is especially handy when strip lighting is tucked under gunwales, behind toe-kicks, inside lockers, or under hardtop overhangs and the cable needs to pass through a bulkhead or chase. Adding the correct length up front helps keep connections accessible for service instead of buried in tight cavities.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 m extension length for planning a predictable run between components\u003c\/li\u003e\n\u003cli\u003eIntended for Lux SL\/SNL strip light power connections\u003c\/li\u003e\n\u003cli\u003eKeeps the installation tidy when the light location is farther from the power feed or driver module\u003c\/li\u003e\n\u003cli\u003eHelps avoid mid-run splices that can be hard to seal and troubleshoot later\u003c\/li\u003e\n\u003cli\u003eUseful for routing through cabinetry, liners, and wire chases while still leaving a small service loop\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is meant for Lux SL\/SNL strip lighting setups. Before ordering, confirm the connection type on your existing Lux SL\/SNL harness and measure the real path the cable will take on the boat, including turns, drip loops, and any extra slack you want for vibration and service access.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the extension where it will stay protected from chafe, heat, and standing water. When passing through bulkheads or metal openings, use a proper grommet or cable gland and support the run so it does not hang on the connection point.\u003c\/p\u003e\u003cp\u003eIf you need to pull the cable through a tight chase, take your time and protect the ends during the pull. Leave enough slack to disconnect and reconnect later without having to remove trim panels or lighting tracks.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis extension makes sense for refits and new installs where strip lights are mounted under cap rails, in cockpit coamings, or inside cabin joinery and the power feed is a bit farther away. It’s also a good match when you are keeping electronics and drivers in a dry, serviceable locker while the strip lights live out at the edges of the boat.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, look for signs of chafe along the run and make sure the connection stays clean and fully seated. If lighting behavior becomes intermittent, the first quick check is the connection point and the cable’s routing around hinges, hatches, and sharp edges.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51550409556214,"sku":"APL717260","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281346_apl717260.webp?v=1787793878"},{"product_id":"apl967600","title":"Metro Marine Piling Mount f\/Vertical Elongated Fixtures F-E1V-PMT","description":"\u003cp\u003e\u003cstrong\u003ePiling Mount for Vertical Elongated Fixtures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis piling mount will fit all Metro Marine vertical elongated fixtures.\u003c\/p\u003e","brand":"Metro Marine","offers":[{"title":"Default Title","offer_id":51550418403574,"sku":"APL967600","price":226.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1101706_apl967600jpg.jpg?v=1787794357"},{"product_id":"apl718337","title":"Lumishore Lumi-Link MFD Conversion Cable, For Simrad \u0026 B\u0026G MFDs","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-14454-00 is a Simrad and B\u0026amp;G MFD conversion cable used to link a Lumishore Command Center to the display network so lighting control can be handled from the helm screen. It is used with EOS underwater lights and other compatible Lumishore lighting systems that support MFD control.\u003c\/p\u003e\u003cp\u003eThe connection is made over Ethernet using the Navico-style network path used by Simrad and B\u0026amp;G, and it plugs into the MFD’s network expansion port rather than a standard RJ45 jack. For the run between devices, use the correct Navico network cable for your Simrad or B\u0026amp;G system, not a generic Ethernet patch cable.\u003c\/p\u003e\u003cp\u003eOnce connected, lighting changes can be made without leaving the helm, which helps when docking after dark or changing scenes at anchor. Route the cable like any other electronics lead on a boat: keep it away from sharp edges and heat, add chafe protection where it passes through bulkheads, and secure it so vibration does not work connections loose.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects a Lumishore Command Center to Simrad and B\u0026amp;G MFDs for on-screen lighting control.\u003c\/li\u003e\n\u003cli\u003eInterfaces with the Navico-style network connection used by Simrad\/B\u0026amp;G Ethernet cabling, not a generic RJ45 patch lead.\u003c\/li\u003e\n\u003cli\u003eSupports MFD control of EOS and other compatible Lumishore lights when paired with an MFD-capable command center.\u003c\/li\u003e\n\u003cli\u003eHelps keep lighting adjustments on the same display used for navigation and boat systems at the helm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for boats running a compatible Lumishore command center and a Simrad or B\u0026amp;G MFD that has an Ethernet network expansion port. Compatible Simrad models include NSO evo3 and evo3S, NSS evo3 and evo3S, NSX, IDS, and GO models (GO7 XSR, GO9, GO12). Compatible B\u0026amp;G models include Zeus3 Glass Helm, Zeus3 and Zeus3S, and Vulcan models (Vulcan 7R, 9, 12).\u003c\/p\u003e\u003cp\u003eIt is a data cable for MFD integration, not the power feed or the control wiring that runs out to the light fixtures. If your lighting system is controlled only by a standalone switch or controller with no MFD support, this is not the right connection.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall it between the command center and the Simrad\/B\u0026amp;G network side of the system, then complete the run with the proper Navico network cable used in your electronics network. Leave a small service loop behind the display and at the command center so future servicing does not strain the connectors.\u003c\/p\u003e\u003cp\u003eKeep the connection point protected from spray and washdowns, and seal any field-installed connectors using the appropriate waterproof cover or gland for the installation. After the command center is on the network and configured, lighting control is accessed through the MFD interface.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis connection makes sense when underwater lights are part of night docking, swim platform time, or cockpit lighting scenes and you want those changes available on the display you already use underway. It is also a clean way to add helm control during refits without reworking the light fixtures themselves.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eA good match for boats that already have a Lumishore command center and want lighting control from a Simrad or B\u0026amp;G screen. It also fits upgrades where the goal is to keep the existing lighting system and bring control into the MFD menus at the helm.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51550562615542,"sku":"APL718337","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281349_apl718337.jpg?v=1787796518"},{"product_id":"apl600638","title":"Ocean LED - Pro Series 3010 XFM HD Gen2 Light Cartridge - Black","description":"\u003cp\u003eIntroducing the Ocean LED Pro Series 3010 XFM HD Gen2 Light Cartridge, the perfect solution for enhancing your underwater marine lighting experience. This high-quality product has been designed with precision and attention to detail, ensuring that you get the most out of your marine lighting system.\u003c\/p\u003e\n\u003cp\u003eOne of the standout features of the Ocean LED Pro Series 3010 XFM HD Gen2 Light Cartridge is its stunning color options. The Ultra White Light option provides a beautiful and bright shade of white that will illuminate the water around your boat, providing a stunning visual display that is sure to impress. Meanwhile, the Midnight Blue Light option offers a mesmerizing deep blue hue that adds a touch of elegance and sophistication to your marine environment.\u003c\/p\u003e\n\u003cp\u003eIn addition to their beautiful colors, both the Ultra White Light and Midnight Blue Light options of the Ocean LED Pro Series 3010 XFM HD Gen2 Light Cartridge are incredibly durable and long-lasting. They have been crafted with high-quality materials that can withstand the harsh marine environment, including saltwater, UV rays, and extreme temperatures. You can rest assured that your Ocean LED Pro Series 3010 XFM HD Gen2 Light Cartridge will perform flawlessly and maintain its brilliant color for years to come.\u003c\/p\u003e\n\u003cp\u003eInstallation of the Ocean LED Pro Series 3010 XFM HD Gen2 Light Cartridge is quick and easy, thanks to its plug-and-play design. Simply insert the cartridge into your marine lighting system, and you're ready to go. The compact size of the cartridge makes it easy to install in tight spaces, and its low-profile design ensures that it won't interfere with other equipment on your boat.\u003c\/p\u003e\n\u003cp\u003eIn conclusion, if you're looking for a high-quality marine lighting solution that offers exceptional durability, stunning visual appeal, and easy installation, look no further than the Ocean LED Pro Series 3010 XFM HD Gen2 Light Cartridge - (011604W). With the Ultra White Light and Midnight Blue Light options, you can customize your marine lighting system to fit your unique style and enjoy the beauty and tranquility of the underwater world from the comfort of your own boat.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Ultra White","offer_id":51550591254774,"sku":"APL600638-V9","price":1695.75,"currency_code":"USD","in_stock":true},{"title":"Midnight Blue","offer_id":51550591287542,"sku":"APL600638-V2","price":1695.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355367_apl600638.png?v=1787796814"},{"product_id":"apl403998","title":"Lumishore - Bridge Module - for Garmin One Helm (LM600368)","description":"\u003cp\u003eIntroducing the Lumishore Bridge Module, designed to enhance your marine navigation experience. This advanced technology module allows for seamless integration with the Garmin One Helm, ensuring that your navigation systems work together in perfect harmony.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for the LM600368 model, the Lumishore Bridge Module offers unparalleled compatibility and ease of use. This product is the perfect addition to your marine navigation setup, providing a streamlined interface and ensuring that all of your systems work together seamlessly.\u003c\/p\u003e\n\u003cp\u003eThe SUPRA Bridge Module takes marine navigation to the next level with its advanced technology and innovative design. This product is built to last, with high-quality materials that can withstand even the harshest marine conditions. Whether you're navigating choppy waters or cruising along calm seas, the SUPRA Bridge Module provides reliable and accurate information to help you stay on course.\u003c\/p\u003e\n\u003cp\u003eAt Lumishore, we understand the importance of having reliable and accurate navigation systems while out on the water. That's why we've designed the Lumishore and SUPRA Bridge Modules with the latest technology and the highest quality materials. With our products, you can trust that your marine navigation systems will work seamlessly together, providing you with the information you need to make informed decisions while out on the water. Choose Lumishore and SUPRA for the ultimate marine navigation experience.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51550712922358,"sku":"APL403998","price":569.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355567_apl403998.png?v=1787799103"},{"product_id":"apl656427","title":"Ocean LED - Replacement Bezel - Plastic, Black Bezel (PLS-000107)","description":"\u003cp\u003eIntroducing the Ocean LED - Underwater Light, the perfect addition to any boating or marine enthusiast's collection. This underwater light is designed to enhance the visibility of any marine vessel, making it easier to navigate through dark waters and highlight the beauty of marine life.\u003c\/p\u003e\n\u003cp\u003eCrafted with durable plastic, the Ocean LED - Underwater Light is designed to withstand the harsh conditions of marine environments. This means that you can be sure that your light will last for years to come, without worrying about it being damaged by saltwater or other harsh conditions.\u003c\/p\u003e\n\u003cp\u003eFeaturing a sleek black bezel, the Ocean LED - Underwater Light is not only functional, but also stylish. The black bezel adds a touch of elegance to any marine vessel, making it stand out from the crowd and enhancing its overall aesthetic.\u003c\/p\u003e\n\u003cp\u003eWith its easy-to-install design, the Ocean LED - Underwater Light can be mounted on any boat, yacht, or other marine vessel. Simply attach the light to the bottom of the vessel and connect it to a power source for instant illumination.\u003c\/p\u003e\n\u003cp\u003eWhether you're a seasoned boater or just starting out, the Ocean LED - Underwater Light is the perfect accessory to take your marine experience to the next level. Order yours today and experience the beauty of the ocean in a whole new light!\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51550718394614,"sku":"APL656427","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355211_apl632723_jpeg.jpg?v=1787799391"},{"product_id":"apl971560","title":"Metro Marine Full Spectrum Controller CTR-4-DATA","description":"\u003cp\u003e\u003cstrong\u003eFull Spectrum Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CTR-4-DATA programmable lighting controller, for RGB and RGBW lighting, has been designed around a touch-sensitive color wheel.\u003c\/p\u003e\n\u003cp\u003eThe controller is USB or WiFi programmable from a PC or Mac using the ESA2 or ESA Pro 2 software. It is also possible to program it over WiFi using the on-site programming app Arcolis.\u003c\/p\u003e\n\u003cp\u003eUp to 36 scenes can be stored within the controller and directly recalled via six touch-sensitive scene buttons. A button located in the center of the color wheel can be used to jump between scenes or reset a color change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew glass design\u003c\/li\u003e\n\u003cli\u003eColor palette\u003c\/li\u003e\n\u003cli\u003eTouch-sensitive buttons\u003c\/li\u003e\n\u003cli\u003eTouch-sensitive scroll wheel\u003c\/li\u003e\n\u003cli\u003e36 scenes, 1 zone\u003c\/li\u003e\n\u003cli\u003eUSB \u0026amp; WiFi connectivity\u003c\/li\u003e\n\u003cli\u003eOEM customization\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Metro Marine","offers":[{"title":"Default Title","offer_id":51550744084726,"sku":"APL971560","price":1209.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1102235_apl971560jpg.jpg?v=1787800180"},{"product_id":"apl959198","title":"Metro Marine Piling Mount f\/F-Series Round Fixtures F-R1-PMT","description":"\u003cp\u003e\u003cstrong\u003ePiling Mount for F-Series Round Fixtures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis piling mount will fit all Metro Marine F-Series round fixtures.\u003c\/p\u003e","brand":"Metro Marine","offers":[{"title":"Default Title","offer_id":51550745886966,"sku":"APL959198","price":226.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1101375_apl959198jpg.jpg?v=1787800261"},{"product_id":"apl717713","title":"Lumishore MFD Conversion Cable, For Lumishore EOS Underwater Lights","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-14453-00 is an MFD conversion cable used when a Lumishore lighting controller is being connected to a Garmin multifunction display network for on screen lighting control. It is a 1.6 ft cable, which is typically used as a short adapter run inside the helm electronics area.\u003c\/p\u003e\u003cp\u003eIn a typical install, this cable sits in the Ethernet link between the lighting control module and the Garmin network cabling that runs to the MFD or a Garmin network expander. For Garmin MFD installations, the conversion cable is required and the link should be made using Garmin network cables, not generic Ethernet patch leads.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUsed to connect compatible Lumishore lighting control hardware into a Garmin MFD network connection for on screen control\u003c\/li\u003e\n\u003cli\u003eIntended for Garmin MFD installs where the adapter must be used with Garmin network cabling in this link\u003c\/li\u003e\n\u003cli\u003e1.6 ft length keeps the conversion close to the equipment and helps avoid extra slack behind the helm\u003c\/li\u003e\n\u003cli\u003eBlack cable jacket that routes cleanly with typical marine electronics looms\u003c\/li\u003e\n\u003cli\u003eCommonly used in systems where a Lumishore control module is tied into the MFD network, such as SUPRA Bridge Module and ECLIPSE Command Center installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for boats where the lighting system is integrated to a Garmin MFD through the MFD network port. It belongs in the network data path between the lighting controller and the Garmin network side of the helm system.\u003c\/p\u003e\u003cp\u003eIf your display does not have a Garmin network connection, or the lighting system is operated only by a dedicated keypad or mobile device, this cable may not have a place in the installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cable run so the connectors stay protected inside the console or electronics box, away from bilge humidity and washdown spray. Leave a small service loop, support the cable so vibration does not work the connectors loose, and avoid tight bends right at the plug ends.\u003c\/p\u003e\u003cp\u003eAfter the physical network connection is made, confirm the MFD software is up to date so the lighting control pages load correctly when the system powers on.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that want helm side control of compatible Lumishore lighting from a Garmin screen, including setups that switch between docking and night cruising scenes without adding another control pad at the dash.\u003c\/p\u003e\u003cp\u003eIt is also helpful on refits where you are keeping an existing Garmin network backbone and adding a lighting controller into the same electronics space for cleaner wiring and simpler access later.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51550833344758,"sku":"APL717713","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281348_apl717713.jpg?v=1787802211"},{"product_id":"apl439637","title":"Ocean LED - Underwater Light - Plastic, Bezel White (PLS-000016)","description":"\u003cp\u003eIntroducing the Ocean LED Underwater Light - the perfect addition to any marine vessel. Designed for durability and performance, this light is sure to provide years of reliable use.\u003c\/p\u003e\n\u003cp\u003eCrafted from high-quality plastic and featuring a sleek white bezel, the Ocean LED Underwater Light (PLS-000016) is both stylish and functional. It seamlessly blends into the hull of your boat, providing a smooth, streamlined appearance.\u003c\/p\u003e\n\u003cp\u003eWith its powerful LED technology, this underwater light is capable of producing a bright, vibrant glow. It's perfect for illuminating the water around your boat and creating a beautiful, ambient atmosphere. Whether you're out for a nighttime cruise or just relaxing at the dock, the Ocean LED Underwater Light is sure to impress.\u003c\/p\u003e\n\u003cp\u003eInstallation is quick and easy, with everything you need included in the package. And with its low power consumption and long lifespan, you can enjoy the benefits of this underwater light for years to come. So why wait? Order your Ocean LED Underwater Light today and take your boating experience to the next level!\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51550913691894,"sku":"APL439637","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355228_apl439637_jpeg.jpg?v=1787804297"},{"product_id":"apl165389","title":"OceanLED - DMX Mobile APP Controller","description":"\u003ch4\u003eIlluminate the Depths: Introducing OceanLED's DMX Mobile App Controller! \u003c\/h4\u003e\n\u003cp\u003eUnleash a mesmerizing aquatic spectacle with the OceanLED DMX Mobile App Controller 011701! Designed to complement the X8 and X16 colors series lights, this cutting-edge controller revolutionizes underwater lighting experiences like never before.\u003c\/p\u003e\n\u003cp\u003eImmerse yourself in the seamless fusion of technology and art as you take control of a kaleidoscope of colors beneath the surface. The DMX Mobile App Controller opens up a world of possibilities, putting the power to curate captivating light displays right at your fingertips.\u003c\/p\u003e\n\u003cp\u003eWith its intuitive mobile app, effortlessly navigate through a spectrum of vibrant hues, creating dynamic scenes that adapt to any mood or occasion. Whether you're hosting an exclusive yacht party, staging a serene marine ambiance, or simply exploring the wonders of the deep, OceanLED's DMX controller promises to elevate your underwater escapades to a whole new dimension.\u003c\/p\u003e\n\u003cp\u003eWhat sets this controller apart is its unique WiFi transmission, establishing a dedicated network solely for your mobile device. Say goodbye to connectivity issues and revel in uninterrupted, fluid control of your underwater lighting system.\u003c\/p\u003e\n\u003cp\u003ePrepare to be captivated by the interplay of light and water as the OceanLED DMX Mobile App Controller becomes an artistic extension of your imagination. Unleash the mystique of the ocean with this exceptional tool that unlocks endless creative possibilities.\u003c\/p\u003e\n\u003ch4\u003eHighlights\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSeamlessly compatible with X8 and X16 colors series lights\u003c\/li\u003e\n\u003cli\u003eIntuitive mobile app for effortless control\u003c\/li\u003e\n\u003cli\u003eCurate captivating light displays with a spectrum of vibrant hues\u003c\/li\u003e\n\u003cli\u003eDedicated WiFi network for uninterrupted connectivity\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51550960779510,"sku":"APL165389","price":488.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371836_apl165389_jpeg.jpg?v=1787805639"},{"product_id":"apl524572","title":"Metro Marine 4M Data Cable f\/Full Spectrum Hub DATA-4M-EX","description":"\u003cp\u003e\u003cstrong\u003e4M Data Cable for Full Spectrum Hub\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis data cable is compatible with Metro Marine's full spectrum hub.\u003c\/p\u003e","brand":"Metro Marine","offers":[{"title":"Default Title","offer_id":51551022088438,"sku":"APL524572","price":302.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1107387_apl524544jpg.jpg?v=1787806907"},{"product_id":"apl876813","title":"Vimar - Bronze Housing - For EOS \u0026 SUPRA Series","description":"\u003ch4\u003eDesigned for Versatile Compatibility\u003c\/h4\u003e\u003cp\u003eThis bronze housing is precision-engineered for use with the EOS and SUPRA TIX804 models, as well as the TIX802 and TIX803. Its robust construction ensures longevity and reliability in demanding marine environments, offering a trusted solution for your underwater lighting needs.\u003c\/p\u003e\u003ch4\u003eBuilt for Marine Durability\u003c\/h4\u003e\u003cp\u003eCrafted from high-quality bronze, this housing is built to withstand harsh marine conditions, including saltwater exposure. Its corrosion-resistant properties ensure optimal performance and a long service life, making it an essential component for underwater lighting systems.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Bronze Construction\u003c\/strong\u003e: Designed to resist corrosion and perform under challenging environmental conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Compatibility\u003c\/strong\u003e: Compatible with EOS and SUPRA TIX804, TIX802, and TIX803 lighting models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust Design\u003c\/strong\u003e: Engineered for reliable and consistent performance in marine applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis bronze housing is an ideal choice for maintaining and upgrading your EOS and SUPRA underwater lighting systems, ensuring dependable protection and extended functionality in demanding marine environments.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51551181963510,"sku":"APL876813","price":1329.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827358_apl-bsw-hvy-tom.png?v=1787810336"},{"product_id":"apl671248","title":"Lumishore - Extension Cable - 3m, for Supra Series (LM600401)","description":"\u003cp\u003eIntroducing the Lumishore Extension Cable, an essential accessory for your Supra Series marine lighting system. This 3-meter cable is designed to connect your LM600401 Supra Series light to the power source or to link multiple lights together, allowing for maximum customization and control of your marine lighting display.\u003c\/p\u003e\n\u003cp\u003eCrafted with the highest quality materials, the Lumishore Extension Cable is built to withstand the harsh marine environment, ensuring reliable performance for years to come. Its durable, weather-resistant construction protects against corrosion, water damage, and extreme temperatures, making it ideal for use in any marine setting.\u003c\/p\u003e\n\u003cp\u003eWith the Lumishore Extension Cable, you can expand the capabilities of your LM600401 Supra Series light, allowing you to create a truly immersive marine lighting experience. Whether you're illuminating your vessel's deck, highlighting key features, or setting the mood for an evening on the water, this extension cable is the perfect accessory to help you achieve your vision.\u003c\/p\u003e\n\u003cp\u003eSo, if you're looking to enhance the performance and versatility of your Supra Series marine lighting system, the Lumishore Extension Cable is the ideal solution. Trust Lumishore, a leading name in marine lighting technology, to provide you with the highest quality products and accessories for all your marine lighting needs.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51552592494838,"sku":"APL671248","price":85.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0356568_apl671248.png?v=1787815862"},{"product_id":"apl704007","title":"Ocean LED - Junction Box - 12\/24V, IP66 (019901)","description":"\u003cp\u003eIntroducing the Ocean LED - Junction Box - 12\/24V, IP66 (019901), the ultimate solution for powering all your marine lights. With this robust box from OceanLED, you can house all your electrical connections and power up to four underwater LEDs with ease. Designed with durability in mind, this junction box will convert the conduit to a multi-cable via easy cable glad connector, giving you an easy and efficient way to power all your marine lights.\u003c\/p\u003e\n\u003cp\u003eOne of the standout features of the Ocean LED - Junction Box - 12\/24V, IP66 (019901) is its 12\/24v DC power supply. This means that you can easily connect all your lights to a single power source, simplifying the installation process and making maintenance a breeze. Additionally, the box is IP66 rated, making it resistant to water and dust, ensuring it can withstand even the harshest marine environments.\u003c\/p\u003e\n\u003cp\u003eThe OceanLED STANDARD 4 WAY JUNCTION BOX 019901 features four fused DMX outputs (10a max per output), providing you with a flexible and versatile way to control your marine lights. With this junction box, you can connect multiple lights to a single DMX controller, giving you full control over your lighting setup. Whether you're looking to create a stunning visual display or simply need a reliable way to illuminate your vessel, this junction box has got you covered.\u003c\/p\u003e\n\u003cp\u003eCrafted with a robust polycarbonate design, the Ocean LED - Junction Box - 12\/24V, IP66 (019901) is built to last. The semi-transparent lid allows you to easily monitor the status of your connections, while the durable construction ensures that your lights stay powered and protected in even the toughest conditions.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51552964051190,"sku":"APL704007","price":212.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355110_apl704007_jpeg.jpg?v=1787817079"},{"product_id":"apl719024","title":"Lumishore LUX SL\/SNL Power Extension Cable, 3 m, 6-Core","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-14457-00 is a 3 m power extension cable for Lumishore Lux SL and SNL strip lighting runs. It adds extra reach between the strip light and the power feed so you can finish a clean install without relocating where the wiring comes from.\u003c\/p\u003e\u003cp\u003eThis is the kind of part you reach for when the lights are going under a gunwale, along cockpit seating, under steps, inside lockers, or up into a hardtop and the existing lead falls short. Extending with a purpose-made cable also helps keep junctions in a dry, serviceable spot instead of buried behind trim where salt, washdowns, and vibration can cause trouble later.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 m (9.8 ft) extension length to add reach in strip light installations\u003c\/li\u003e\n\u003cli\u003eMade for the power connection used on Lumishore Lux SL and SNL strip lighting systems\u003c\/li\u003e\n\u003cli\u003eUseful for routing power around bulkheads and through conduits without moving the supply point\u003c\/li\u003e\n\u003cli\u003eHelps keep connections accessible and away from constant spray when planned into the run\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for Lumishore Lux SL\/SNL strip lighting power runs. It is not a chartplotter power cable and it is not a data or network lead. Before ordering, confirm your existing strip light harness is from the Lux SL or SNL family and that you have a clear routing path for the added length.\u003c\/p\u003e\u003cp\u003eOn board, plan for strain relief at both ends and leave a little service loop where you can reach it later. If the cable passes through fiberglass, aluminum, or tight chase tubes, protect it with a grommet or chafe sleeve and keep it clear of hinges, sliding hatches, and steering or throttle linkages.\u003c\/p\u003e\u003ch6\u003eInstallation and routing\u003c\/h6\u003e\u003cp\u003eRun the extension high and dry when you can, and build a drip loop if the path drops toward a wet area. Secure the cable at regular intervals so it is not free to whip in chop, and avoid pulling it tight across sharp edges or screw points behind panels.\u003c\/p\u003e\u003cp\u003eIf any part of the system requires splicing elsewhere in the run, use marine-grade connectors and sealing methods that match the environment, then re-check the lights after the first few trips as everything settles and moves under load.\u003c\/p\u003e\u003ch6\u003eWho it suits on board\u003c\/h6\u003e\u003cp\u003eThis extension is a practical add-on for owners and installers doing strip lighting in long cockpits, under-gunnel accent runs, step lighting, and interior toe-kicks where the cleanest power source is not right next to the mounting location.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51553450033398,"sku":"APL719024","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281353_apl719024.jpg?v=1787820800"},{"product_id":"apl677693","title":"Ocean LED - Replacement Bezel - Plastic, Bezel Black (PLS-000108)","description":"\u003cp\u003eIntroducing the Ocean LED - Underwater Light, the perfect accessory for any boater or water enthusiast looking to enhance their marine experience.\u003c\/p\u003e\n\u003cp\u003eCrafted with durable plastic materials, this underwater light is built to last in even the harshest marine environments. Whether you're fishing, swimming, or simply cruising along the water, the Ocean LED will provide you with unparalleled visibility beneath the surface.\u003c\/p\u003e\n\u003cp\u003eWith its sleek black bezel, the Ocean LED offers a stylish and modern aesthetic that will complement any boat's design. The PLS-000108 model features a black bezel, adding a touch of sophistication to your vessel's exterior.\u003c\/p\u003e\n\u003cp\u003eNot only does the Ocean LED enhance the look of your boat, but it also provides a practical purpose. Its bright light will illuminate the water, allowing you to see what lies beneath the surface. Whether you're looking for a fishing spot, keeping an eye out for debris, or simply enjoying the view, the Ocean LED has got you covered.\u003c\/p\u003e\n\u003cp\u003eEasy to install and operate, the Ocean LED is a must-have for any marine enthusiast looking to take their boating experience to the next level. Trust in its durability and efficiency to deliver an exceptional performance every time you hit the water. Order your Ocean LED - Underwater Light today and start exploring the depths like never before!\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51553514455286,"sku":"APL677693","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0365088_apl506328_jpeg.jpg?v=1787821960"},{"product_id":"apl876623","title":"Ocean LED - Replacement Bezel - Plastic, Bezel White (PLS-000010)","description":"\u003cp\u003eIntroducing the Ocean LED, an innovative underwater light that is perfect for all marine enthusiasts. With its sleek design and reliable performance, this product is sure to meet all your needs for underwater illumination.\u003c\/p\u003e\n\u003cp\u003eCrafted with top-quality materials, this Ocean LED features a white plastic bezel that not only enhances its durability but also adds a touch of elegance to its appearance. The plastic material ensures that the product is lightweight, making it easy to install and use.\u003c\/p\u003e\n\u003cp\u003eDesigned to withstand the harsh marine environment, this underwater light is perfect for all kinds of marine applications, including fishing, ping, and recreational boating. Whether you want to enhance the look of your boat or attract fish at night, this product is sure to meet your needs.\u003c\/p\u003e\n\u003cp\u003eWith its advanced lighting technology, this Ocean LED provides superior illumination that is both bright and efficient. It is designed to consume less energy, making it an eco-friendly option for all marine enthusiasts.\u003c\/p\u003e\n\u003cp\u003eOverall, if you're looking for a high-quality underwater light that delivers superior performance and durability, look no further than the Ocean LED. With its exceptional design and reliable construction, this product is sure to exceed your expectations and provide you with an unmatched underwater lighting experience.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51553527857398,"sku":"APL876623","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355228_apl439637_jpeg.jpg?v=1787804297"},{"product_id":"apl524243","title":"Newmar Power - PX-1 Junction Box","description":"\u003ch4\u003eSecure and Reliable Marine Wiring Connections\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNewmar PX-1 Junction Box\u003c\/strong\u003e is designed to provide waterproof and secure wiring connections for both above and below deck installations. Perfect for areas exposed to occasional spray, this junction box ensures your electrical systems remain safe and operational in all marine environments.\u003c\/p\u003e\u003ch4\u003eGeneral Description\u003c\/h4\u003e\u003cp\u003eThe Newmar PX-1 Junction Box offers a robust and waterproof solution for protecting your vessel’s wiring connections. Made from high-impact polypropylene, it is designed to withstand harsh marine conditions without corroding. The snap-on cover provides a watertight seal, ensuring that water projected in jets from any direction will not compromise the internal connections, meeting the IEC IP55 waterproof rating.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Design\u003c\/strong\u003e: Rated IP55, providing reliable protection against water projected in jets from any direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Made from rugged, non-corrosive, high-impact polypropylene for enhanced durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Wiring\u003c\/strong\u003e: Molded nylon connector strips with screw compression terminals ensure secure wire connections without the need for lugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Access\u003c\/strong\u003e: Features multiple knockouts for conduit access and universal cut-to-fit cable entries for a wide range of cable sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e: Meets ABYC standards, ensuring safe and reliable marine installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Connector Strips\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions per Strip\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge\u003c\/strong\u003e: 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Entry Ports\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Entries Installed\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare Cable Entries Provided\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter Range\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eInches\u003c\/strong\u003e: .14 – .81\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eMillimeters\u003c\/strong\u003e: 3.5 – 20.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Size\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eInches\u003c\/strong\u003e: 2.95 x 2.95 x 1.66\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eCentimeters\u003c\/strong\u003e: 7.5 x 7.5 x 4.2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cp\u003eThe PX-1 Junction Box's compact dimensions (2.95 x 2.95 x 1.66 inches) make it an ideal choice for various marine applications. Its small size allows for versatile installation in tight spaces while ensuring robust protection for your wiring connections.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Protection\u003c\/strong\u003e: Ensures wiring connections remain secure and dry, even in spray-prone areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Long-Lasting\u003c\/strong\u003e: High-impact polypropylene construction provides long-term durability and resistance to corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Connections\u003c\/strong\u003e: Brass barrel connectors with stainless steel compression fittings ensure reliable and safe wiring connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Installation\u003c\/strong\u003e: Multiple knockouts and cable entry ports allow for flexible and easy installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication and Usage\u003c\/h4\u003e\u003cp\u003eIdeal for use in wheelhouses, below decks, and engine rooms, the Newmar PX-1 Junction Box is a versatile solution for any marine vessel requiring waterproof and secure wiring connections. Its robust design and waterproof rating make it a reliable choice for maintaining the integrity of your electrical systems in harsh marine environments.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":51553852227830,"sku":"APL524243","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717283_apl524243.jpg?v=1787824190"},{"product_id":"apl620034","title":"Ocean LED - OceanConnect Junction Box","description":"\u003ch4\u003eStreamline Your Lighting with OceanLED OceanConnect Junction Box\u003c\/h4\u003e\n\u003cp\u003eIntroducing the \u003cstrong\u003eOceanConnect Junction Box\u003c\/strong\u003e, your all-in-one solution for seamless marine lighting control. This waterproof (IP66) and DMX-controlled junction box is designed for low-voltage DC (9–32V) applications, offering unparalleled ease in connecting and managing your DC-powered lights and devices. Whether you're aiming to illuminate your vessel with OceanLED's X-Series lights or integrate other DC-switched units, the OceanConnect Junction Box provides a reliable and efficient power distribution center that simplifies installation and enhances control over your lighting system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterproof IP66 rating ensures durability in harsh marine environments.\u003c\/li\u003e\n\u003cli\u003eSupports one power unit and four individually switched fused power outputs (6 amps per output).\u003c\/li\u003e\n\u003cli\u003eCompatible with up to four DMX-controlled OceanLED X-Series lights, allowing for individual addressing and control.\u003c\/li\u003e\n\u003cli\u003eIncluded in the box: OceanConnect unit with 4x 7.5A blade fuses, mounting screws, twin entry cable grommet, and blanking plugs.\u003c\/li\u003e\n\u003cli\u003eEasy integration with existing systems, thanks to DMX In\/Out and multiple light output capabilities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Excellence for Advanced Lighting Solutions\u003c\/h4\u003e\n\u003cp\u003eThe OceanConnect Junction Box is engineered to meet the demands of modern marine lighting systems, featuring robust input\/output cable glands and versatile wire gauge compatibility. With dedicated terminals for power input, DMX control, and light outputs, it ensures a secure and efficient connection for all your lighting needs. The onboard DMX terminator with an on\/off switch further simplifies the daisy-chaining of multiple junction boxes, providing a scalable solution for any size of vessel.\u003c\/p\u003e\n\u003ch4\u003eDurable and User-Friendly Design\u003c\/h4\u003e\n\u003cp\u003eCrafted from robust polycarbonate with an IP66 enclosure, the OceanConnect Junction Box is built to withstand the rigors of marine use while maintaining a compact and user-friendly design. Its dimensions (including cable glands) of 228mm x 174mm x 60mm (9\"\" x 6.8\"\" x 2.3\"\") and weight of 270g make it easy to install in a variety of locations on board. With the OceanConnect, you're not just installing a junction box; you're upgrading to a smarter, more connected lighting system.\u003c\/p\u003e\n\u003cp\u003eEquip your vessel with the OceanLED OceanConnect Junction Box and experience the ease and convenience of advanced lighting control, designed specifically for the marine environment.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51553883554038,"sku":"APL620034","price":305.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0715816_apl620034.jpg?v=1787824706"},{"product_id":"apl069357","title":"Ocean LED - Replacement Bezel - Stainless Steel Bezel (011416)","description":"\u003cp\u003eIntroducing the Ocean LED Underwater Light with Stainless Steel Bezel (011416) - the perfect addition to any boat or yacht. This powerful light illuminates the water around your vessel, creating a stunning and mesmerizing effect that is sure to impress.\u003c\/p\u003e\n\u003cp\u003eCrafted with a durable stainless steel bezel, the Ocean LED Underwater Light is designed to withstand the harsh marine environment. It is specifically designed to work seamlessly with the OceanLED X4 Series, including the Ultra White 012301W and the Midnight Blue 012302B models.\u003c\/p\u003e\n\u003cp\u003eWhether you're cruising at night or anchored in a beautiful cove, the Ocean LED Underwater Light will enhance your boating experience. It is easy to install and operate, with a user-friendly interface that allows you to control the light from the comfort of your helm.\u003c\/p\u003e\n\u003cp\u003eThe Ocean LED Underwater Light with Stainless Steel Bezel (011416) is built to last and will provide years of reliable service. So why wait? Add this powerful and beautiful light to your boat today and start enjoying the magic of underwater illumination.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51553894727926,"sku":"APL069357","price":79.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0357593_apl069357_jpeg.jpg?v=1787824147"},{"product_id":"apl644588","title":"Ocean LED - Remote \u0026 Pouch - Dual 915 (013025)","description":"\u003cp\u003eIntroducing the Ocean LED Remote and Pouch - Dual 915 (013025) - the perfect addition to your marine lighting setup. With its innovative design and reliable performance, this product is a must-have for any boater looking to enhance their experience on the water.\u003c\/p\u003e\n\u003cp\u003eThe Ocean LED Remote and Pouch - Dual 915 (013025) offers a unique combination of convenience and functionality. The included remote control allows you to easily control your Ocean LED lights from a distance, while the pouch provides a safe and secure place to store the remote when not in use.\u003c\/p\u003e\n\u003cp\u003eThis product is designed with the boater in mind. The dual 915MHz frequency ensures reliable and uninterrupted communication between the remote and your Ocean LED lights, even in challenging marine environments. And with its durable construction, you can rest assured that this product will stand up to the rigors of life on the water.\u003c\/p\u003e\n\u003cp\u003eWhether you're using your boat for fishing, cruising, or just enjoying some time on the water with family and friends, the Ocean LED Remote and Pouch - Dual 915 (013025) is an essential accessory that will help you make the most of your time on the water.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51553900527862,"sku":"APL644588","price":142.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355391_apl644588_jpeg.jpg?v=1787824928"},{"product_id":"apl720174","title":"Lumishore LUX SL\/SNL Strip Light Power Extension Cable, 4m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-14458-00 is a 4 m Lux SL\/SNL power extension cable that extends the 6-core connection between a LUX strip light and its driver.\u003c\/p\u003e\u003cp\u003eIt gives you extra reach when the strip light is mounted where it looks best and the driver needs to live somewhere more practical, like inside a locker, behind a console panel, or in a dry service space.\u003c\/p\u003e\u003cp\u003eMultiple extensions can be joined, but the total extension length between the driver and the strip light should not exceed 15 m.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 m extension length for LUX SL and LUX SNL strip light installations\u003c\/li\u003e\n\u003cli\u003e6-core in-line cable used between the strip light and the strip light driver\u003c\/li\u003e\n\u003cli\u003eUseful for remote driver placement while keeping the light run continuous\u003c\/li\u003e\n\u003cli\u003eExtensions can be combined; keep total extension length at 15 m or less\u003c\/li\u003e\n\u003cli\u003eFits clean routing on larger boats where lighting zones are far from the driver location\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for Lumishore LUX SL and LUX SNL strip lighting systems that use a 6-core connection between the strip light and the driver. Confirm the connector style on your existing harness before ordering, especially if you are mixing older and newer lighting components.\u003c\/p\u003e\u003cp\u003eIt does not change how the lighting is controlled; it only extends the physical run between the driver and the strip light.\u003c\/p\u003e\u003ch6\u003eInstallation and routing notes\u003c\/h6\u003e\u003cp\u003eRoute the cable where it will not chafe, and support it at intervals so it cannot vibrate against sharp edges. Keep it clear of hot engine components, moving steering linkages, and any area where water sits.\u003c\/p\u003e\u003cp\u003eLeave a small service loop at each end so the connectors are not under tension, and keep connection points out of bilge water and away from places that see regular washdowns.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis extension is a good fit for long accent-light runs under gunwales, cockpit seating, toe-kicks, or cabin trim where the driver is mounted centrally and the lighting zones are spread out across the boat.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51553914388726,"sku":"APL720174","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281353_apl719024.jpg?v=1787820800"},{"product_id":"apl197644","title":"Newmar Power - BX-2 Junction Box","description":"\u003ch4\u003eUltimate Protection for Your Marine Wiring Needs\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNewmar BX-2 Junction Box\u003c\/strong\u003e is an essential component for any marine vessel, offering secure and protected wiring connections in critical areas such as wheelhouses, below decks, and engine rooms. This splashproof box ensures that your electrical systems remain safe and functional, even in challenging marine environments.\u003c\/p\u003e\u003ch4\u003eGeneral Description\u003c\/h4\u003e\u003cp\u003eThe Newmar BX-2 Junction Box is designed to provide robust and reliable protection for wiring connections on marine vessels. With an IP54 rating, it is splashproof, making it ideal for areas exposed to moisture and other elements. Constructed from rugged cast aluminum with a white enamel finish, this box is built to withstand harsh marine conditions while minimizing electrical interference.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplashproof Design\u003c\/strong\u003e: Rated IP54 for reliable protection against splashes and moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Made from rugged cast aluminum with a white enamel finish for enhanced durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Interference Reduction\u003c\/strong\u003e: Metal box construction helps minimize electrical interference for better performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Access Wiring\u003c\/strong\u003e: Multiple grommeted cable entries allow for easy and secure wiring access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Connector Strips\u003c\/strong\u003e: Supplied with secure connector strips featuring compression fittings—no terminals required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Connector Strips\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions per Strip\u003c\/strong\u003e: 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge\u003c\/strong\u003e: 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amps per Position\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Entries\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter\u003c\/strong\u003e: 0.37 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Size\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eImperial\u003c\/strong\u003e: 4.4 x 2.4 x 1.2 inches\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eMetric\u003c\/strong\u003e: 11.2 x 6.1 x 3.1 centimeters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cp\u003eThe BX-2 Junction Box's dimensions (4.4 x 2.4 x 1.2 inches) make it a versatile and compact solution for various marine applications, ensuring it can fit into tight spaces while still providing robust protection for your wiring connections.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Protection\u003c\/strong\u003e: Ensures your wiring connections remain safe and functional in marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Multiple cable entries and high-quality connector strips simplify the wiring process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Long-Lasting\u003c\/strong\u003e: Built to withstand the rigors of marine use, ensuring longevity and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Electrical Interference\u003c\/strong\u003e: The metal construction helps to minimize interference, enhancing the performance of your electrical systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication and Usage\u003c\/h4\u003e\u003cp\u003eIdeal for use in wheelhouses, below decks, and engine rooms, the Newmar BX-2 Junction Box is a versatile solution for any marine vessel requiring secure and protected wiring connections. Its splashproof design and durable construction make it a reliable choice for maintaining the integrity of your electrical systems in challenging marine environments.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":51554003714294,"sku":"APL197644","price":82.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717281_apl197644.jpg?v=1787826218"},{"product_id":"apl012342","title":"Lumishore - DMX Terminator Cable (LM240087)","description":"\u003cp\u003eIntroducing the Lumishore Extension Cable, the perfect addition to your marine lighting system. This cable is designed to extend the reach of your DMX Terminator, allowing you to connect your lighting fixtures even if they are located far away from the main control unit.\u003c\/p\u003e\n\u003cp\u003eWith a length of LM240087, this extension cable is long enough to cover most distances on a typical marine vessel. It is constructed from high-quality materials, ensuring that it is durable and resistant to the harsh marine environment.\u003c\/p\u003e\n\u003cp\u003eThe Lumishore Extension Cable is also designed to work seamlessly with your existing Lumishore lighting system. It is easy to install, simply plug it in between your DMX Terminator and your lighting fixture, and you're good to go.\u003c\/p\u003e\n\u003cp\u003eSo, whether you're looking to illuminate the deck of your yacht or add some colorful lighting to your fishing boat, the Lumishore Extension Cable is an essential component of your marine lighting system. With its high-quality construction, ease of use, and compatibility with Lumishore products, you can trust that this cable will provide you with years of reliable service.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554012430582,"sku":"APL012342","price":33.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355728_apl012342.png?v=1787826570"},{"product_id":"apl718970","title":"Lumishore Lux SL\/SNL 1m Strip Light Power Extension Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-14455-00 is a 1 m power extension cable for Lux SL\/SNL strip light installations. It’s used when the factory lead does not quite reach the power feed or driver location, so you can keep the run clean without cutting and re-terminating wiring.\u003c\/p\u003e\u003cp\u003eOn boats, this is especially handy when strip lighting is tucked under gunwales, behind toe-kicks, inside lockers, or under hardtop overhangs and the cable needs to pass through a bulkhead or chase. Adding the correct length up front helps keep connections accessible for service instead of buried in tight cavities.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1 m extension length for planning a predictable run between components\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntended for Lux SL\/SNL strip light power connections\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eKeeps the installation tidy when the light location is farther from the power feed or driver module\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHelps avoid mid-run splices that can be hard to seal and troubleshoot later\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUseful for routing through cabinetry, liners, and wire chases while still leaving a small service loop\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is meant for Lux SL\/SNL strip lighting setups. Before ordering, confirm the connection type on your existing Lux SL\/SNL harness and measure the real path the cable will take on the boat, including turns, drip loops, and any extra slack you want for vibration and service access.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the extension where it will stay protected from chafe, heat, and standing water. When passing through bulkheads or metal openings, use a proper grommet or cable gland and support the run so it does not hang on the connection point.\u003c\/p\u003e\u003cp\u003eIf you need to pull the cable through a tight chase, take your time and protect the ends during the pull. Leave enough slack to disconnect and reconnect later without having to remove trim panels or lighting tracks.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis extension makes sense for refits and new installs where strip lights are mounted under cap rails, in cockpit coamings, or inside cabin joinery and the power feed is a bit farther away. It’s also a good match when you are keeping electronics and drivers in a dry, serviceable locker while the strip lights live out at the edges of the boat.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, look for signs of chafe along the run and make sure the connection stays clean and fully seated. If lighting behavior becomes intermittent, the first quick check is the connection point and the cable’s routing around hinges, hatches, and sharp edges.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554021834998,"sku":"APL718970","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281351_apl718970.jpg?v=1787826852"},{"product_id":"apl426541","title":"UWL - Extension Cable for QTS-100\/QTS-130 Only","description":"\u003ch4\u003eUnleash the Full Potential of Your Marine Underwater Lights with the UWL 2m \/ 6' Extension Cable\u003c\/h4\u003e\n\u003cp\u003eIlluminate your underwater world with unparalleled beauty and extend the range of your UWL QTS-100 RGBW and QTS-130 RGBW lights using our innovative 2m \/ 6' extension cable. This versatile accessory empowers you to explore new depths of creativity and flexibility in your marine lighting setup.\u003c\/p\u003e\n\u003ch4\u003eExtended Reach for Captivating Illumination\u003c\/h4\u003e\n\u003cp\u003eThe UWL 2m \/ 6' Extension Cable opens up a realm of possibilities, allowing you to extend the reach of your underwater lights. With its generous length, it bridges the gap between your lights and power source, giving you the freedom to position them exactly where you desire. Extend the range of your lights and create mesmerizing visual displays that captivate both above and below the water's surface.\u003c\/p\u003e\n\u003ch4\u003eConnect Multiple Lights for Spectacular Displays\u003c\/h4\u003e\n\u003cp\u003eWith a maximum limit of 40' per light, this extension cable ensures no corner of your marine oasis remains untouched by vibrant illumination. Seamlessly connect multiple lights and extend their reach throughout your aquatic realm, casting a mesmerizing glow that dances gracefully through the water.\u003c\/p\u003e\n\u003ch4\u003eRugged and Durable Construction\u003c\/h4\u003e\n\u003cp\u003eThe UWL 2m \/ 6' Extension Cable is crafted with precision and durability in mind, designed to withstand the harsh marine environment. Its rugged construction ensures reliable performance, allowing you to immerse your lights in any setting without compromising their functionality.\u003c\/p\u003e\n\u003ch4\u003eEffortless Installation and Setup\u003c\/h4\u003e\n\u003cp\u003eExperience the seamless integration and effortless operation that UWL is renowned for. This extension cable is designed with user convenience in mind, making installation and setup a breeze. Connect and disconnect with ease, allowing you to adapt and reconfigure your lighting arrangement with minimal effort.\u003c\/p\u003e\n\u003ch4\u003eHighlights:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eExtend the reach of your UWL QTS-100 RGBW and QTS-130 RGBW lights\u003c\/li\u003e\n\u003cli\u003eEffortlessly bridge the gap between lights and power source\u003c\/li\u003e\n\u003cli\u003eMaximize the impact of your underwater lights\u003c\/li\u003e\n\u003cli\u003eConnect multiple lights for stunning visual displays\u003c\/li\u003e\n\u003cli\u003eRugged and durable construction for reliable performance\u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications:\u003c\/h4\u003e\n\u003cp\u003eDimensions: 2 meters \/ 6 feet\u003c\/p\u003e\n\u003cp\u003eCompatible with UWL QTS-100 RGBW and QTS-130 RGBW lights\u003c\/p\u003e\n\u003cp\u003eMaximum extension per light: 40 feet\u003c\/p\u003e","brand":"UWL","offers":[{"title":"6m \/ 19' Cable","offer_id":51554057945334,"sku":"APL426541-V3","price":150.29,"currency_code":"USD","in_stock":true},{"title":"2m \/ 6' Cable","offer_id":51554057978102,"sku":"APL426541-V8","price":128.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371516_apl426541_jpeg.jpg?v=1787827589"},{"product_id":"apl269012","title":"UWL - QT-80 Upgrade - Underwater Light 12\/24V, 7,000 Lumens","description":"\u003ch4\u003eUpgrade Your Underwater Lighting with the QT80 Retro Fit\u003c\/h4\u003e\u003cp\u003eElevate your underwater lighting system with the QT80 Retro Fit from UWL. Specifically designed to replace older style Ultimate 80 halogen and Xenon lights, this retrofit kit offers hassle-free installation and immediate benefits without the need to haul your boat out of the water.\u003c\/p\u003e\u003ch4\u003ePowerful Illumination and Wide Beam Angle\u003c\/h4\u003e\u003cp\u003eExperience a significant increase in brightness with the QT80 Retro Fit, delivering 7,000 lumens of light power. Perfectly suited for boats under 65ft in length, this powerful light is available in single color options of White and Blue.\u003c\/p\u003e\u003ch4\u003eDurable Construction and Long Life Expectancy\u003c\/h4\u003e\u003cp\u003eConstructed with anodized aluminum and armor coated AB2 bronze, the QT80 Retro Fit ensures durability and longevity. With a remarkable 40,000-hour life expectancy, this light is built to withstand the marine environment. It also features reverse polarity protection and over-temperature thermal roll back protection for added safety and reliability.\u003c\/p\u003e\u003ch4\u003eEasy Installation and Growth Resistant Lens\u003c\/h4\u003e\u003cp\u003eInstalling the QT80 Retro Fit is a breeze with the included mounting and connection hardware. The growth resistant lens guarantees clear and bright underwater lighting for years to come, minimizing maintenance and ensuring optimal performance.\u003c\/p\u003e\u003ch4\u003eHighlights:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEffortless retrofit for older style Ultimate 80 halogen and Xenon lights\u003c\/li\u003e\n\u003cli\u003eImmediate increase in brightness with 7,000 lumens\u003c\/li\u003e\n\u003cli\u003eAvailable in single color options of White and Blue\u003c\/li\u003e\n\u003cli\u003ePower consumption 4amp@12V DC \/ 1.8amp@24V DC\u003c\/li\u003e\n\u003cli\u003eDurable construction with anodized aluminum\u003c\/li\u003e\n\u003cli\u003e40,000-hour life expectancy for long-lasting performance\u003c\/li\u003e\n\u003cli\u003eReverse polarity and over-temperature protection for safety\u003c\/li\u003e\n\u003cli\u003eEasy installation with included mounting and connection hardware\u003c\/li\u003e\n\u003cli\u003eGrowth resistant lens for clear and bright underwater lighting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UWL","offers":[{"title":"A \/ Blue","offer_id":51554059518198,"sku":"APL269012-V9","price":913.85,"currency_code":"USD","in_stock":true},{"title":"B \/ White","offer_id":51554059550966,"sku":"APL269012-V8","price":913.85,"currency_code":"USD","in_stock":true},{"title":"A \/ White","offer_id":51554059583734,"sku":"APL269012-V6","price":913.85,"currency_code":"USD","in_stock":true},{"title":"B \/ Blue","offer_id":51554059616502,"sku":"APL269012-V1","price":913.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371464_apl269012_jpeg.jpg?v=1787827605"},{"product_id":"apl278422","title":"Newmar Power - BX-3 Junction Box","description":"\u003ch4\u003eSecure Your Marine Wiring with Confidence\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNewmar BX-3 Junction Box\u003c\/strong\u003e is designed to provide secure and protected wiring connections in critical marine environments. Perfect for wheelhouses, below decks, and engine rooms, this junction box ensures your electrical systems remain safe and operational even in the most demanding conditions.\u003c\/p\u003e\u003ch4\u003eGeneral Description\u003c\/h4\u003e\u003cp\u003eThe Newmar BX-3 Junction Box is a robust solution for protecting your vessel’s wiring connections. With an IP54 splashproof rating, it is built to withstand exposure to moisture and harsh marine conditions. The rugged cast aluminum construction, finished with white enamel, offers durability and corrosion resistance, while the metal box design reduces electrical interference, ensuring optimal performance of your electrical systems.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplashproof Design\u003c\/strong\u003e: Rated IP54 for reliable protection against splashes and moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable Construction\u003c\/strong\u003e: Made from rugged cast aluminum with a white enamel finish for enhanced durability and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical Interference Reduction\u003c\/strong\u003e: The metal box construction minimizes electrical interference, enhancing system performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Access Wiring\u003c\/strong\u003e: Multiple grommeted cable entries allow for easy and secure wiring access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Connector Strips\u003c\/strong\u003e: Supplied with secure connector strips featuring compression fittings, eliminating the need for terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Connector Strips\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions per Strip\u003c\/strong\u003e: 11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge\u003c\/strong\u003e: 14\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Amps per Position\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Entries\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter\u003c\/strong\u003e: 0.59 inches (1.5 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Size\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eImperial\u003c\/strong\u003e: 4.7 x 3.7 x 1.3 inches\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eMetric\u003c\/strong\u003e: 11.9 x 9.4 x 3.3 centimeters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cp\u003eThe BX-3 Junction Box's dimensions (4.7 x 3.7 x 1.3 inches) make it a versatile and compact solution for various marine applications. It ensures a secure fit in tight spaces while providing robust protection for your wiring connections.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Protection\u003c\/strong\u003e: Ensures your wiring connections remain safe and functional in challenging marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Multiple cable entries and high-quality connector strips simplify the wiring process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Long-Lasting\u003c\/strong\u003e: Built to withstand the rigors of marine use, ensuring longevity and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduces Electrical Interference\u003c\/strong\u003e: The metal construction helps to minimize interference, enhancing the performance of your electrical systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication and Usage\u003c\/h4\u003e\u003cp\u003eIdeal for use in wheelhouses, below decks, and engine rooms, the Newmar BX-3 Junction Box is a versatile solution for any marine vessel requiring secure and protected wiring connections. Its splashproof design and durable construction make it a reliable choice for maintaining the integrity of your electrical systems in harsh marine environments.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":51554203926774,"sku":"APL278422","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717282_apl278422.jpg?v=1787830320"},{"product_id":"apl892999","title":"Lumishore - SUPRA Series i-Connect Hub - 10.5-31V, 40A, IP68 (LM600317)","description":"\u003cp\u003eIntroducing the Lumishore SUPRA Series i-Connect Hub - the perfect addition to your SMX53 SUPRA Series underwater lights. This specially designed junction box makes installation a breeze with its plug-\u0026amp;-play connections. The SUPRA i-Connect Hub can be used with SUPRA i-Connect Hub Switch or as an interface between Lumi-Link MFD (multi-function display) Bridge and compatible MFD, such as the Garmin OneHelm.\u003c\/p\u003e\n\u003cp\u003eEach SUPRA i-Connect Hub supports up to four SMX53 SUPRA fixtures, and up to four hubs can be linked together, allowing for expansion to up to 16 lights. With the built-in switching power relay, replaceable fuses, and noise filter, you can rest assured that your lights will be safe and efficient.\u003c\/p\u003e\n\u003cp\u003eNot compatible with SMX23, this black thermoplastic housing finish and material is CE certified and has an ingress protection rating of IP68, providing a reliable and durable addition to your marine lighting system. With an input voltage of 10-31VDC and a load rating of 40A, this hub is built to handle even the toughest marine environments.\u003c\/p\u003e\n\u003cp\u003eWith dimensions of 5.83\" (148mm) x 3.11\" (79mm) x 1.50\" (38mm) and a weight of approximately 3 pounds, the Lumishore SUPRA Series i-Connect Hub is easy to install and maintain. Upgrade your marine lighting system with this innovative and reliable product from Lumishore.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554226831606,"sku":"APL892999","price":332.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355572_apl306006_jpeg.jpg?v=1787831088"},{"product_id":"apl798620","title":"Lumishore - Command Center EOS - 10.5-31V, IP67 (LM600366)","description":"\u003cp\u003eIntroducing the Lumishore - Command Center EOS, the ultimate control center for your marine lighting needs. With an input voltage range of 10.5-31VDC, this product is compatible with a variety of marine electrical systems.\u003c\/p\u003e\n\u003cp\u003eDesigned to withstand the toughest marine conditions, the Lumishore - Command Center EOS has an Ingress Protection (IP) rating of IP67, ensuring it remains fully operational even in harsh weather or in the event of submersion in water.\u003c\/p\u003e\n\u003cp\u003eThe Lumishore Lumi-Link Command Center allows you to control your boat's lighting with ease via your MFD or display. Compatible with leading marine electronics manufacturers, including Garmin (OneHelm Enabled), Raymarine - Axiom (Lighthouse partner App), Navico, Simrad (NSO EVO3 and EVO2, NSS EVO3 and Go**), B\u0026amp;G (Zeus3 Glass Helm, Zeus3 and Vulcan), and Furuno (Models TBA), you can easily integrate your Lumishore lighting system with your existing marine electronics.\u003c\/p\u003e\n\u003cp\u003eWith an approximate ship weight of just 2 pounds, the Lumishore - Command Center EOS is lightweight and easy to install. Whether you are retrofitting an existing vessel or installing on a new build, this product is the perfect solution for all your marine lighting needs.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554227486966,"sku":"APL798620","price":1092.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0352377_apl603222_jpeg.jpg?v=1787831150"},{"product_id":"apl959232","title":"Metro Marine Surface Mount f\/F-Series Round Fixtures F-R1-SMT","description":"\u003cp\u003e\u003cstrong\u003eSurface Mount for F-Series Round Fixtures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis surface mount will fit all Metro Marine F-Series round fixtures.\u003c\/p\u003e","brand":"Metro Marine","offers":[{"title":"Default Title","offer_id":51554237448438,"sku":"APL959232","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1101376_apl959232jpg.jpg?v=1787831524"},{"product_id":"apl106864","title":"UWL - 4-Light Junction Box, Single Color (QTD-JUNCTION HUB)","description":"\u003ch4\u003eSimplify Your Marine DC Lighting Installation with the UWL 4-Light Junction Box\u003c\/h4\u003e\u003cp\u003eExperience a hassle-free marine lighting installation process with the UWL 4-Light Junction Box. Designed to simplify and streamline your setup, this junction box is the perfect choice for boats, yachts, and other marine vessels, offering reliability and convenience.\u003c\/p\u003e\u003ch4\u003eAccommodate Up to 4 Lights\u003c\/h4\u003e\u003cp\u003eConnect up to four marine lights with ease using the UWL 4-Light Junction Box. Its versatile design allows for the seamless connection of multiple lights, saving you time and effort. The included QTD-JUNCTION HUB ensures a hassle-free connection process. The junction box can also accommodate the earth bonding system, allowing you to consolidate all the wiring for the lights into one location instead of making individual connections at each light.\u003c\/p\u003e\u003ch4\u003eCompact Size, Ideal for Limited Space\u003c\/h4\u003e\u003cp\u003eThe UWL 4-Light Junction Box features a compact size, measuring just 6 inches wide, 3.5 inches in height, and 2.5 inches in depth. Its small and sleek design is perfect for boats with limited space, ensuring a seamless fit without compromising functionality.\u003c\/p\u003e\u003ch4\u003eDurable Construction for Harsh Marine Environments\u003c\/h4\u003e\u003cp\u003eConstructed from high-quality materials, the UWL 4-Light Junction Box is built to withstand the challenges of harsh marine environments. Rest assured that your lights will be securely connected and protected from the elements, ensuring long-lasting performance. The lights feature quick disconnects for easy installation, and each light is equipped with blade fuses inside the junction box for protection.\u003c\/p\u003e\u003ch4\u003eCompatibility:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: var(--bs-card-color); font-family: var(--bs-body-font-family); font-size: var(--bs-body-font-size); font-weight: var(--bs-body-font-weight); text-align: var(--bs-body-text-align);\"\u003eQT-80-Ti\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eQTS-100 LP\u003c\/li\u003e\n\u003cli\u003eQTS-100 LP1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eHighlights:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSimplifies marine lighting installation\u003c\/li\u003e\n\u003cli\u003eAccommodates up to 4 lights\u003c\/li\u003e\n\u003cli\u003eCompact size for boats with limited space\u003c\/li\u003e\n\u003cli\u003eDurable construction for harsh marine environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"UWL","offers":[{"title":"Default Title","offer_id":51554267037942,"sku":"APL106864","price":241.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371478_apl106864_jpeg.jpg?v=1787832347"},{"product_id":"apl299125","title":"Lumishore SUPRA i-Connect Hub Kit, Additional Hub with Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore SUPRA i-Connect Hub Kit is an additional control hub for SUPRA dual-color underwater lighting systems, with versions for THX\/TIX thru-hull lights and SMX surface-mount lights. It brings power distribution and lighting control into one junction point, which helps keep underwater light wiring cleaner when a boat has more than one group of fixtures.\u003c\/p\u003e\u003cp\u003eEach hub can power and control up to 4 compatible SUPRA underwater lights and operates on 10.5 to 31 V DC, making it suitable for common 12 V and 24 V marine electrical systems. The hub supports synchronized color, strobe and fade control when used within the SUPRA i-Connect system.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSupports up to 4 compatible SUPRA dual-color underwater lights from one hub.\u003c\/li\u003e\n\u003cli\u003eWorks with 10.5 to 31 V DC systems for use on 12 V and 24 V boats.\u003c\/li\u003e\n\u003cli\u003eAvailable for THX\/TIX thru-hull lights or SMX surface-mount lights, so the hub can match the installed fixture type.\u003c\/li\u003e\n\u003cli\u003eIP68-rated cable entry and exit connections help protect the wiring interface in damp bilge, transom and equipment-area installations.\u003c\/li\u003e\n\u003cli\u003eBuilt-in relay, noise filter and reverse polarity protection help manage control and power delivery in a marine electrical environment.\u003c\/li\u003e\n\u003cli\u003eIndividual light status indication and replaceable blade fusing support cleaner troubleshooting when a fixture or circuit needs attention.\u003c\/li\u003e\n\u003cli\u003eSUPRA Bridge Module compatibility allows the lighting system to be integrated with compatible multifunction display control when that module is added.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis hub kit is offered in two compatibility configurations for SUPRA underwater light installations.\u003c\/p\u003e\u003cp\u003eThe main difference is the underwater light family the hub is meant to control. The THX\/TIX version is for thru-hull SUPRA lights, while the SMX version is for surface-mount SUPRA lights. Both configurations support up to 4 compatible lights per hub.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-04359-00, underwater light compatibility: THX\/TIX. This version is used when expanding or wiring SUPRA THX or TIX thru-hull underwater light systems.\u003c\/li\u003e\n\u003cli\u003e010-04356-00, underwater light compatibility: SMX. This version is used with SUPRA SMX surface-mount underwater light systems and keeps the control hub matched to the surface-mount fixture layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is an additional hub, so it is most useful when a SUPRA installation needs another controlled group of underwater lights rather than a complete first-time control kit. It should be mounted in a dry, serviceable location where the installer can route power, light leads and control cabling without tight bends or strain at the connectors.\u003c\/p\u003e\u003cp\u003eFor larger layouts, THX\/TIX systems can use up to 16 hubs per boat, while SMX systems can use up to 4 hubs per boat. That makes the hub suitable for transom lighting expansions, multi-light sportfish installations, larger cruisers and yachts where several underwater fixtures need to stay synchronized.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the hub to the installed underwater light type before ordering. THX and TIX refer to thru-hull SUPRA lights, while SMX refers to surface-mount SUPRA lights. Mixing the wrong hub style with the wrong light family can create fit and wiring issues during installation.\u003c\/p\u003e\u003cp\u003eThe hub is a good match for boat owners, refit yards and marine electronics installers adding SUPRA underwater lights to an existing system or expanding beyond a basic four-light layout. It is also useful when the wiring plan benefits from splitting lights into cleaner hub locations instead of crowding all runs into one area.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe 10.5 to 31 V DC operating range gives the hub flexibility across most recreational marine DC systems. As with any underwater lighting circuit, cable routing, fusing, breaker selection and conductor sizing should follow the light system requirements and the boat’s electrical standards.\u003c\/p\u003e\u003cp\u003eWhen paired with the SUPRA Bridge Module, the lighting system can be brought into compatible MFD control. Without that bridge, the hub still works as part of the SUPRA i-Connect control layout for synchronized dual-color lighting functions.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"THX\/TIX","offer_id":51554284994806,"sku":"APL299125-V1","price":319.99,"currency_code":"USD","in_stock":true},{"title":"SMX","offer_id":51554285027574,"sku":"APL299125-V2","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1337554_apl299125.webp?v=1787833098"},{"product_id":"apl068697","title":"Ocean LED - OceanDMX WTP Plus Touch Panel Controller - Touch Sensitive, Dynamic Scenes, Graphic Display","description":"\u003cp\u003eIntroducing the Ocean LED OceanDMX WTP Plus Touch Panel Controller, the perfect solution for enhancing your marine lighting experience. With this controller, you can easily customize the color and brightness of your OceanLED lighting fixtures with just a touch of a button.\u003c\/p\u003e\n\u003cp\u003eThe sleek panel design not only adds a modern look to your boat, but it is also durable and built to withstand harsh marine environments. Whether you're using it to set the mood for a relaxing evening on the water or to attract fish during a nighttime fishing excursion, the Ocean LED OceanDMX WTP Plus Touch Panel Controller is the ultimate lighting control system.\u003c\/p\u003e\n\u003cp\u003eThis controller is designed to be compatible with a variety of OceanLED products, including the Pro Series Colours in black and white, as well as the Explore XFM Colours in black and white. Additionally, the Explore XFM Dual is available in both black and white for even more customization options.\u003c\/p\u003e\n\u003cp\u003eWith a power supply of 6-9V DC, the Ocean LED OceanDMX WTP Plus Touch Panel Controller is energy-efficient and easy to use. The touch panel interface is intuitive and user-friendly, allowing you to adjust your lighting settings quickly and easily.\u003c\/p\u003e\n\u003cp\u003eOverall, the Ocean LED OceanDMX WTP Plus Touch Panel Controller is a must-have for any boat owner who wants to enhance their lighting experience. It is easy to install, simple to use, and offers a wide range of customization options that will help you create the perfect ambiance for any occasion. So, why wait? Upgrade your marine lighting system today with the Ocean LED OceanDMX WTP Plus Touch Panel Controller.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Explore XFM Dual \/ White","offer_id":51554285650166,"sku":"APL068697-V2","price":1828.75,"currency_code":"USD","in_stock":true},{"title":"Pro Series Colours \/ Black","offer_id":51554285682934,"sku":"APL068697-V0","price":1828.75,"currency_code":"USD","in_stock":true},{"title":"Explore XFM Dual \/ Black","offer_id":51554285715702,"sku":"APL068697-V8","price":1959.0,"currency_code":"USD","in_stock":false},{"title":"Explore XFM Colours \/ White","offer_id":51554285748470,"sku":"APL068697-V3","price":1828.75,"currency_code":"USD","in_stock":true},{"title":"Explore XFM Colours \/ Black","offer_id":51554285781238,"sku":"APL068697-V7","price":1959.0,"currency_code":"USD","in_stock":false},{"title":"Pro Series Colours \/ White","offer_id":51554285814006,"sku":"APL068697-V4","price":1828.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355399_apl068697_jpeg.jpg?v=1787833152"},{"product_id":"apl316416","title":"Lumishore - EOS Series i-Connect Hub - (LM600321)","description":"\u003cp\u003eIntroducing the Lumishore EOS Series i-Connect Hub, the ultimate solution for those looking to add color and vibrancy to their underwater world. This specially designed junction box has been created specifically to work in conjunction with the EOS SMX153 and EOS TIX403 RGBW color changing underwater lights.\u003c\/p\u003e\n\u003cp\u003eOne of the standout features of the Lumishore EOS Series i-Connect Hub is its ease of installation, making it the perfect choice for those who want to add stunning underwater lighting without the hassle. The plug-\u0026amp;-play connections make installation a breeze, ensuring that you can get your lights up and running quickly and efficiently.\u003c\/p\u003e\n\u003cp\u003eDesigned to support up to 4 EOS fixtures, this powerful hub is also compatible with the EOS Mini-i Color Change controller, allowing you to customize the lighting to suit your exact requirements. What's more, the hub is Lumi-Link compatible, providing seamless integration with MFDs for a truly connected underwater lighting experience.\u003c\/p\u003e\n\u003cp\u003eWith a built-in switching power relay, replaceable fuses, and a noise filter, the Lumishore EOS Series i-Connect Hub has everything you need to ensure your underwater lighting is always working at its best. And with an approximate ship weight of just 3lbs, it's easy to transport and install wherever you need it.\u003c\/p\u003e\n\u003cp\u003eSo, whether you're looking to enhance your marine experience with stunning underwater lighting or simply need a reliable and easy-to-use solution for your boat or yacht, the Lumishore EOS Series i-Connect Hub is the perfect choice.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554310226166,"sku":"APL316416","price":237.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355572_apl306006_jpeg.jpg?v=1787831088"},{"product_id":"apl218029","title":"Lumishore - DMX Cable - 30V, 3-Pin Connector Plug-ends","description":"\u003ch4\u003eIlluminate Your Voyage with the Lumishore DMX Cable\u003c\/h4\u003e\n\u003cp\u003ePresenting the Lumishore DMX Cable - an ideal solution for connecting Lumishore driver modules in series or extending the DMX cable length provided with the 2 x EOS Light Sets.\u003c\/p\u003e\n\u003ch4\u003eNavigating the Depths: Lumishore DMX Cable's Technical Specifications\u003c\/h4\u003e\n\u003cp\u003eDesigned specifically for marine use, this DMX Cable is rated to 80dg C \u0026amp; 30V. It guarantees safe and dependable operation, even under harsh marine conditions. Featuring 3-pin connector plug-ends, it simplifies the installation process with Lumishore driver modules. This DMX Cable also comes with a Class I, II rating, satisfying the top safety standards for electrical equipment. Moreover, it is U.L. Recognized, confirming its top-tier manufacturing quality.\u003c\/p\u003e\n\u003ch4\u003eStretching the Horizon: Lumishore DMX Cable's Dimensions\u003c\/h4\u003e\n\u003cp\u003eThis DMX Cable provides an extension length that perfectly caters to long-distance connections of Lumishore driver modules. It's flexibility in size, with options of 1M, 5M and 15M lengths, ensures an adaptable fit for your unique needs.\u003c\/p\u003e\n\u003ch4\u003eQuality Unveiled: Highlights of the Lumishore DMX Cable\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for marine use, ensuring reliability in harsh conditions\u003c\/li\u003e\n\u003cli\u003eRated to 80dg C \u0026amp; 30V for safe operation\u003c\/li\u003e\n\u003cli\u003eEasy installation with 3-pin connector plug-ends\u003c\/li\u003e\n\u003cli\u003eHigh safety standards with a Class I, II rating and U.L. Recognition\u003c\/li\u003e\n\u003cli\u003eAvailable in various lengths for customizable installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eExpand Your Reach: Available Lengths in the Lumishore DMX Cable Series\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLumishore DMX Cable - 1 Meter\u003c\/li\u003e\n\u003cli\u003eLumishore DMX Cable - 5 Meters\u003c\/li\u003e\n\u003cli\u003eLumishore DMX Cable - 15 Meters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lumishore","offers":[{"title":"5m","offer_id":51554365636854,"sku":"APL218029-V0","price":75.99,"currency_code":"USD","in_stock":true},{"title":"1m","offer_id":51554365669622,"sku":"APL218029-V3","price":47.49,"currency_code":"USD","in_stock":true},{"title":"15m","offer_id":51554365702390,"sku":"APL218029-V5","price":175.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0356560_apl218029.png?v=1787834850"},{"product_id":"apl928501","title":"Lumishore - STV 2204-I Display DMX Controller - EOS Full Color Change (RGBW) (LM600369)","description":"\u003cp\u003eIntroducing the Lumishore STV 2204-i Lumi-Link Display - the perfect tool for controlling your EOS underwater lights LUX smart lighting. This display is specifically designed to work with the Lumi-Link Command Center, allowing for easy and intuitive control of your lighting system.\u003c\/p\u003e\n\u003cp\u003eWith its simple click-and-play function and easy-to-navigate modern icons, the Lumishore STV 2204-i Lumi-Link Display makes controlling your underwater lighting system a breeze. Plus, with full two-way DMX compatibility, you have the flexibility to customize your lighting setup exactly the way you want it.\u003c\/p\u003e\n\u003cp\u003eBut that's not all - the Lumishore STV 2204-i Lumi-Link Display also comes with built-in 'Sound-to-Light' integration, allowing you to sync your lights with your vessel's on-board stereo or iOS device. And with built-in Wi-Fi control, you can even use your iPhone or iPad, along with the free companion Lumi-App, to control your lighting system from anywhere on your boat.\u003c\/p\u003e\n\u003cp\u003eThe EOS STV 2204-I is a dedicated glass-bridge full-screen display, measuring 3.5 inches (89mm), providing a clear and easy-to-read display of your lighting setup. It is compatible with the EOS Series Thru-Hull (THX) (TIX) \u0026amp; Surface Mount (SMX153 Only) lighting systems.\u003c\/p\u003e\n\u003cp\u003ePlease note that the Lumishore STV 2204-i Lumi-Link Display requires the Lumi-Link Command Center to function properly. But with this powerful combination of tools, you'll have complete control over your underwater lighting system and can create the perfect ambiance for any on-board activity.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554367176950,"sku":"APL928501","price":759.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355564_apl928501.png?v=1787834826"},{"product_id":"apl668737","title":"Lumishore SUPRA i-Connect Install Kit, For SMX54, IP68, 4-Light Hub","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04443-00 is an i-Connect installation kit that serves as a junction box and control hub for SUPRA Series SMX underwater lights. It runs on 10.5 to 31 V DC for 12 V and 24 V systems, and one hub can manage up to four light circuits with a replaceable blade fuse and a status LED for each output.\u003c\/p\u003e\u003cp\u003eThe enclosure is IP68 and sized 148 mm x 79 mm x 38 mm, which helps when you need to mount it in places that see spray, washdowns, and vibration. Switching is handled by a built-in relay, and the internal noise filter and reverse polarity protection add a layer of protection when the boat electrical environment gets messy.\u003c\/p\u003e\u003cp\u003eControl can be handled locally with the included hub switch, or through a compatible MFD, EOS-LUX-SUPRA display, or WiFi control when used with a SUPRA Bridge Module. Up to four hubs can be used in one installation for up to sixteen lights total.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eVoltage range of 10.5 to 31 V DC for common 12 V and 24 V systems\u003c\/li\u003e\n\u003cli\u003eSupports up to 4 lights per hub and up to 4 hubs per system (up to 16 lights)\u003c\/li\u003e\n\u003cli\u003eMax input current up to 40 A, with up to 10 A available per light circuit\u003c\/li\u003e\n\u003cli\u003eIP68 enclosure with an ABS housing and IP68 cable entry and exit connections for wet areas\u003c\/li\u003e\n\u003cli\u003eReplaceable blade fuse and a status indication LED for each light output for quicker fault finding\u003c\/li\u003e\n\u003cli\u003eBuilt-in relay for switching, plus a built-in noise filter and reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eLocal control via the included hub switch, with MFD, display, or WiFi control available when paired with a SUPRA Bridge Module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ei-Connect hub junction box\u003c\/li\u003e\n\u003cli\u003ei-Connect hub switch\u003c\/li\u003e\n\u003cli\u003eField-installable IP68 connectors for SMX connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis hub is intended for SUPRA Series SMX underwater lighting installations where you want centralized distribution, per-light protection, and cleaner cable management. It is Lumi-Link compatible, and it supports control through a compatible MFD or EOS-LUX-SUPRA display when a SUPRA Bridge Module is used. If you are planning a multi-light install, keep the per-circuit and total current limits in mind so the hub and wiring stay within spec.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot so light cables can reach without tight bends and so you can still access the fuses and status LEDs after the job is finished. The IP68 connectors are field-installable, which helps when you are pulling cables through rigging tubes and need to terminate at the hub after routing. For best results on a boat, use proper strain relief, keep connections clean and dry while assembling, and secure the harness so it cannot chafe.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe hub acts as the switching point for the lights, with a built-in relay and per-output fusing. When the optional SUPRA Bridge Module is part of the system, control can move to the helm through a compatible MFD or to a dedicated display, and WiFi control can also be used through the same integration path. This approach keeps heavy-current lighting runs off the dash switches while still giving you clear circuit-level feedback at the hub.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup fits boats that run multiple transom underwater lights and need a tidy way to distribute power while keeping each light protected and easy to troubleshoot. It is a good match for refits where you are upgrading an older lighting install and want centralized fusing and status indication without reworking the entire helm.\u003c\/p\u003e\u003ch6\u003eMaintenance and troubleshooting\u003c\/h6\u003e\u003cp\u003eIf a light stops responding, the first checks are the status LED for that circuit and the matching blade fuse, followed by inspection of the connector seating and wiring condition. Keeping the hub area free of standing water and periodically checking cable support points goes a long way toward preventing intermittent issues in rough conditions.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554378678518,"sku":"APL668737","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281260_apl668737.jpg?v=1787835422"},{"product_id":"apl549333","title":"Ocean LED - Replacement Bezel - Stainless Steel Bezel (011417)","description":"\u003cp\u003eIntroducing the Ocean LED Underwater Light with a Stainless Steel Bezel (011417), the perfect addition to any marine vessel seeking high-quality and durable underwater lighting. With its sleek and modern design, this underwater light is sure to impress.\u003c\/p\u003e\n\u003cp\u003eThe OceanLED X8 Series Steel Bezel 011417 is specifically designed for use with the X8 Colours, X8 Midnight Blue, and X8 Ultra White lights, ensuring a seamless and precise fit. The stainless steel bezel not only adds to the aesthetic appeal of the light but also provides additional protection against harsh marine environments.\u003c\/p\u003e\n\u003cp\u003eThe X8 Colours (012307C) offer a customizable lighting experience with 8 colors to choose from, while the X8 Midnight Blue (012305B) emits a deep and rich blue hue, and the X8 Ultra White (012304W) provides a bright and crisp white light. Regardless of the color option chosen, the OceanLED X8 Series Steel Bezel 011417 provides an unparalleled underwater lighting experience.\u003c\/p\u003e\n\u003cp\u003eCrafted with the highest-quality materials, this underwater light is built to withstand the demands of marine life. The stainless steel bezel ensures durability and longevity, while the light itself is fully sealed to prevent water intrusion. Plus, with its low profile design, this light will not interfere with the performance or aesthetics of your vessel.\u003c\/p\u003e\n\u003cp\u003eUpgrade your marine vessel with the Ocean LED Underwater Light with a Stainless Steel Bezel (011417) today and experience the beauty and functionality of high-quality underwater lighting.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51554392998134,"sku":"APL549333","price":93.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355283_apl549333_jpeg.jpg?v=1787835911"},{"product_id":"apl470310","title":"Ocean LED - Isolating Mounting Kit - White (019913)","description":"\u003cp\u003eIntroducing the Ocean LED Isolating Mounting Kit, the perfect complement to your new Discover Series D3 underwater LED light. Designed specifically for this high-performance light, the kit ensures secure installation and long-lasting durability.\u003c\/p\u003e\n\u003cp\u003eWith a powerful output of 700 lumens, the Discover D3 is an excellent choice for boaters who want to experience the magic of underwater lighting. The bright and vivid illumination brings a whole new dimension to your boating experience, allowing you to enjoy nighttime swimming, fishing, and even marine photography.\u003c\/p\u003e\n\u003cp\u003eThe Discover D3 is also incredibly versatile, with a wide voltage range of 10-30V, making it compatible with a wide range of boats and onboard electrical systems. This means that you can install the D3 on your yacht, sailboat, fishing boat, or any other vessel you own, and enjoy its powerful performance and longevity.\u003c\/p\u003e\n\u003cp\u003eBut what really sets the Discover D3 apart is its impressive rating of IP69k. This is the highest achievable rating of protection against water ingress, providing you with the ultimate peace of mind. Even when exposed to harsh marine environments, the D3 will continue to perform at its best, thanks to its robust and durable design.\u003c\/p\u003e\n\u003cp\u003eSo if you're looking for a high-quality underwater LED light that can handle the rigors of the marine environment, look no further than the Ocean LED Discover Series D3, paired with the Ocean LED Isolating Mounting Kit.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51554498412790,"sku":"APL470310","price":25.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355007_apl204804_jpeg.jpg?v=1787795200"},{"product_id":"apl971492","title":"Metro Marine Full Spectrum (Pro Model) Controller CTR-3-DATA","description":"\u003cp\u003e\u003cstrong\u003eFull Spectrum (Pro Model) Controller\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe feature-rich CTR-3-DATA has been designed to provide a control solution for the most demanding of projects and yet is easy enough for anyone to use. The controller integrates a graphical color display, allowing scene photos to be displayed. Easily view the selected zone, scene name, and design without the need to navigate through complex menus.\u003c\/p\u003e\n\u003cp\u003eThe CTR-3-DATA has 4 different modes. Scroll around the touch-sensitive wheel to change the dimmer, color, speed, or scene, or tap around the wheel for direct access to a value. The arrows can be used to step through values.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlass design\u003c\/li\u003e\n\u003cli\u003eGraphical color display\u003c\/li\u003e\n\u003cli\u003eColor\/dimmer\/speed palette\u003c\/li\u003e\n\u003cli\u003eTouch-sensitive buttons\u003c\/li\u003e\n\u003cli\u003eTouch-sensitive scroll wheel\u003c\/li\u003e\n\u003cli\u003eMulti-zone microSD memory\u003c\/li\u003e\n\u003cli\u003e500 scenes, 10 zones\u003c\/li\u003e\n\u003cli\u003eUSB \u0026amp; ethernet connectivity\u003c\/li\u003e\n\u003cli\u003eNetwork communication\u003c\/li\u003e\n\u003cli\u003eOEM customization\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Metro Marine","offers":[{"title":"Default Title","offer_id":51554522497270,"sku":"APL971492","price":2285.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1102234_apl971492jpg.jpg?v=1787839540"},{"product_id":"apl045657","title":"Ocean LED - Locking Nut Kit","description":"\u003ch4\u003eSecure Your Voyage: OceanLED Locking Nut Kit for All Thru Hull Models\u003c\/h4\u003e\n\u003cp\u003eEmbark on a seamless nautical journey with the OceanLED Locking Nut Kit, the ultimate solution designed to enhance and secure your marine lighting setup. Perfectly compatible with all Thru Hull models, this kit ensures that your lighting fixtures are tightly and securely fastened, preventing water ingress and enhancing the durability of your marine equipment. Whether you're navigating the calm waters or braving the stormy seas, this locking nut kit promises peace of mind by keeping your lights firmly in place.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures a watertight seal, protecting against water damage\u003c\/li\u003e\n\u003cli\u003eCompatible with all Thru Hull models for a universal fit\u003c\/li\u003e\n\u003cli\u003eEasy to install, requiring no special tools\u003c\/li\u003e\n\u003cli\u003eDurable construction for long-lasting reliability\u003c\/li\u003e\n\u003cli\u003eEnhances the overall safety and integrity of your marine lighting system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eVoyage-Ready Specifications\u003c\/h4\u003e\n\u003cp\u003eDive into the details that make the OceanLED Locking Nut Kit a must-have for any seafarer. Crafted from high-quality materials, this kit is designed to withstand the harsh marine environment, ensuring your lights stay secure, no matter the conditions. Its universal compatibility with Thru Hull models makes it a versatile choice for a wide range of boats and yachts.\u003c\/p\u003e\n\u003ch4\u003eCompact Design, Mighty Performance\u003c\/h4\u003e\n\u003cp\u003eDespite its small footprint, the OceanLED Locking Nut Kit plays a big role in maintaining the safety and functionality of your marine lighting. Its compact dimensions ensure a perfect fit without adding unnecessary bulk to your setup.\u003c\/p\u003e\n\u003ch4\u003eShine Bright, Sail Right\u003c\/h4\u003e\n\u003cp\u003eWhile this kit does not directly influence color temperature, its role in securing your Thru Hull lights ensures that your chosen illumination shines brightly and reliably, guiding your way through the waters.\u003c\/p\u003e\n\u003ch4\u003eSleek Finishes to Complement Your Craft\u003c\/h4\u003e\n\u003cp\u003eDesigned to blend seamlessly with your boat's aesthetics, the locking nut kit comes in finishes that match your existing Thru Hull fixtures. Its unobtrusive design ensures functionality without compromising on style.\u003c\/p\u003e\n\u003ch4\u003eChoose Your Fit: Variations for Every Vessel\u003c\/h4\u003e\n\u003cp\u003eUnderstanding the diverse needs of the maritime community, the OceanLED Locking Nut Kit is available in multiple sizes to ensure a perfect fit for your specific Thru Hull model. Each variation is crafted with the same attention to quality and durability, designed to meet the unique demands of your marine adventures.\u003c\/p\u003e","brand":"Ocean LED","offers":[{"title":"Default Title","offer_id":51554877079798,"sku":"APL045657","price":175.56,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0704522_apl045657.png?v=1787845502"},{"product_id":"apl719193","title":"Lumishore - SUPRA Interface Module - 10.5-31VDC","description":"\u003ch4\u003eSeamless Lighting Control for Marine Excellence\u003c\/h4\u003e\u003cp\u003eThe SUPRA Interface Module is designed to elevate your marine lighting experience by seamlessly integrating with the EOS-LUX Command Center. Perfect for boats equipped with or requiring above-water LUX lighting systems, this module offers unmatched convenience and functionality. With its compact design and plug-and-play setup, it ensures quick installation and effortless operation. Whether managing SUPRA underwater lights or coordinating LUX above-water systems, this module consolidates all lighting controls into one intuitive interface, accessible from connected multifunction displays (MFDs) and smart devices.\u003c\/p\u003e\u003ch4\u003eAdvanced Technical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage Range:\u003c\/strong\u003e 10.5 - 31 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Current Draw (12\/24V):\u003c\/strong\u003e 0.2 A \/ 0.1 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReverse Polarity Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurge Protection:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO 8846 Compliance (Ignition Protection):\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating:\u003c\/strong\u003e IP68\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Power Control:\u003c\/strong\u003e Intelligent Multi-Channel Power Management\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompact and Marine-Grade Design\u003c\/h4\u003e\u003cp\u003eThe SUPRA Interface Module boasts an IP68 ingress protection rating, ensuring superior resistance to water and dust. Its rugged design meets marine-grade standards, making it a reliable companion for harsh marine environments.\u003c\/p\u003e\u003ch4\u003eKey Highlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUnified control for both SUPRA underwater and LUX above-water lighting systems.\u003c\/li\u003e\n\u003cli\u003eSimple plug-and-play installation for quick deployment.\u003c\/li\u003e\n\u003cli\u003eCompatible with all TIX, THX, and SMX54 SUPRA underwater lighting models.\u003c\/li\u003e\n\u003cli\u003eAccess controls through MFDs and smart devices for maximum convenience.\u003c\/li\u003e\n\u003cli\u003eBuilt-in surge and reverse polarity protection for enhanced safety.\u003c\/li\u003e\n\u003cli\u003eISO 8846 ignition protection, ensuring compliance with marine safety standards.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554877866230,"sku":"APL719193","price":379.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827275_apl719193.png?v=1787845549"},{"product_id":"apl145898","title":"Lumishore - Eclipse Dual Expansion Module - 2 Additional Zones of ECLIPSE Lighting (LM600497)","description":"\u003cp\u003eIntroducing the Lumishore Eclipse Dual Expansion Module, the perfect accessory for your marine lighting needs. This module is designed to enhance your Eclipse Lighting System by providing you with 2 additional zones of lighting, allowing you to fully customize your vessel's illumination.\u003c\/p\u003e\n\u003cp\u003eWith the LM600497 model, you can enjoy unparalleled flexibility and control over your onboard lighting. Whether you want to create a warm and inviting atmosphere for evening entertaining or a bright and functional workspace for nighttime fishing, this expansion module has got you covered.\u003c\/p\u003e\n\u003cp\u003eThe Lumishore Eclipse Dual Expansion Module is engineered to be easy to install and use. It features a compact and lightweight design, making it ideal for boats of all sizes. Once installed, the module can be controlled using the Lumishore EOS STV 2204-i Display, allowing you to adjust your lighting settings with ease.\u003c\/p\u003e\n\u003cp\u003eThanks to its durable construction and advanced technology, the Lumishore Eclipse Dual Expansion Module is a reliable and long-lasting addition to your marine lighting setup. So, if you're looking to take your onboard lighting to the next level, this expansion module is the perfect choice.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51554900345078,"sku":"APL145898","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0356565_apl145898_jpeg.jpg?v=1787846470"},{"product_id":"apl026053","title":"Lumishore Cable Splitter, For LUX Strip \u0026 Neon Flex, 6-Core","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore LUX Strip\/Neon Flex Light 6 Core Cable Splitter is a 6-core lighting splitter for branching one Lumishore LUX Strip or Neon Flex lighting output into multiple runs. It is used when a boat lighting layout needs separate strip or flex sections fed from the same source, such as port and starboard accent runs, a split cockpit layout, or multiple short runs around cabinetry or seating.\u003c\/p\u003e\u003cp\u003eThis splitter range supports 2-way and 3-way configurations, so the installer can match the branch count to the lighting plan without cutting and splicing the main harness. The 6-core format keeps the multi-channel lighting conductors together, which is important for color-changing and multi-channel Lumishore strip and flex installations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-core splitter made for Lumishore LUX Strip and Neon Flex lighting systems.\u003c\/li\u003e\n\u003cli\u003eAvailable in 2-way and 3-way versions for branching one lighting output into multiple runs.\u003c\/li\u003e\n\u003cli\u003eUseful for boat lighting layouts that split around cockpits, cabins, helm areas, hardtops, seating, and accent panels.\u003c\/li\u003e\n\u003cli\u003eHelps keep the wiring layout cleaner than cutting into the main lighting harness during a multi-run installation.\u003c\/li\u003e\n\u003cli\u003eSupports coordinated strip or flex lighting runs from a single source when the connected Lumishore system is configured for that layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two splitter configurations. The difference is the number of lighting branches created from the source connection.\u003c\/p\u003e\u003cp\u003eBoth versions are 6-core cable splitters for Lumishore LUX Strip and Neon Flex lighting installations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e010-14465-00, Cable Splitter 2-way. This version splits the feed into two lighting runs, which suits layouts where the light path separates in two directions.\u003c\/li\u003e\n\u003cli\u003e010-14466-00, Cable Splitter 3-way. This version splits the feed into three lighting runs, which is useful when a layout needs an additional branch without adding a separate source connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the splitter as part of a planned Lumishore strip or flex lighting layout, keeping total system load, driver capacity, cable routing, and branch lengths within the limits of the connected lighting system. Power should be isolated before installation, and the wiring should be installed by a qualified marine electrical technician.\u003c\/p\u003e\u003cp\u003eOn board, the most practical use is to keep lighting runs tidy where one feed needs to serve separate areas. Common examples include splitting a cockpit accent run around both sides of a seating module, feeding separate cabin accent sections, or routing light runs around a helm or hardtop without unnecessary wire joins.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis splitter is for Lumishore LUX Strip and Neon Flex lighting systems. It should be matched to the correct Lumishore lighting components already installed or being installed on the vessel, including the appropriate driver or control hardware for that lighting type.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"2-way","offer_id":51554921939190,"sku":"APL026053-V1","price":64.99,"currency_code":"USD","in_stock":true},{"title":"3-way","offer_id":51554921971958,"sku":"APL026053-V2","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1337635_apl026053.webp?v=1787922299"},{"product_id":"apl687404","title":"Lumishore ECLIPSE Command Center Lighting Control Module, MFD Ethernet Control, 12V Only, IP67, 3-Zone, 10A per Zone, Wi-Fi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04486-00 is a lighting command center that lets you group ECLIPSE lights into three controllable zones and run them from a compatible MFD, a phone or tablet over Wi-Fi, or simple momentary switches. It runs on 12V DC only (10 to 15V) and supports up to 10A per zone, 30A total, with an IP67-rated enclosure for spray and washdowns.\u003c\/p\u003e\u003cp\u003eIt is a good match when you want the boat's lighting to behave like a single system instead of separate circuits, whether you are setting up new ECLIPSE fixtures or cleaning up an older install with multiple dimmers and relays.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC input only with an operating range of 10 to 15V\u003c\/li\u003e\n\u003cli\u003eThree lighting zones with up to 10A per zone (30A total load across the controller)\u003c\/li\u003e\n\u003cli\u003eExpansion support to add up to three additional zones with add-on modules\u003c\/li\u003e\n\u003cli\u003eIP67 housing for installation in areas that see spray and routine washdowns\u003c\/li\u003e\n\u003cli\u003eControl from compatible MFDs via Ethernet, from a smart device over built-in Wi-Fi, or from hardwired momentary switches\u003c\/li\u003e\n\u003cli\u003eSwitch feedback output supports illuminated switches or status indicators for each zone\u003c\/li\u003e\n\u003cli\u003eBuilt-in protection for surge events, low-voltage conditions, and reverse polarity wiring\u003c\/li\u003e\n\u003cli\u003eAudio input for sound-to-light effects when used with compatible RGBW underwater lights\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit on a flat surface in a dry location where you can route a dedicated 12V feed and keep cable runs tidy. Keep it away from heat sources and spots that see constant vibration.\u003c\/p\u003e\u003cp\u003ePlan your power feed and overcurrent protection around the connected lighting load. The controller supports up to 30A total across three zones, and each zone is limited to 10A, so wiring and fusing should be sized to the load and the cable run.\u003c\/p\u003e\u003ch6\u003eCompatibility and integration\u003c\/h6\u003e\u003cp\u003eThis controller is for 12V electrical systems and operates between 10 and 15V at the unit. On 24V boats, a properly sized 24-to-12V DC converter is required to supply stable voltage under load.\u003c\/p\u003e\u003cp\u003eFor helm control, connect through the Ethernet port and follow the network cabling requirements for your display brand. Wi-Fi control is handy during commissioning or when you want to adjust lighting while moving around the boat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThree-zone control works well for separating areas like the transom, cockpit, and hardtop, while still keeping quick access at the helm. It also suits refits where you want consistent dimming and color control across multiple ECLIPSE light types without adding separate drivers for each zone.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSupport and secure the wiring so connectors do not carry strain, especially in lockers where gear gets stored. If the unit is mounted where washdowns are common, check seals and cable entries periodically.\u003c\/p\u003e\u003cp\u003eLeave service access for the SD card slot so firmware updates can be done without removing the controller.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51555146825974,"sku":"APL687404","price":499.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281333_apl687404.jpg?v=1787851356"},{"product_id":"apl895621","title":"Lumishore ECLIPSE Expansion Module, For ECLIPSE Command Center, 12V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore ECLIPSE Expansion Module is a 12V DC lighting control add-on for expanding a Lumishore ECLIPSE Command Center by 1 or 2 lighting zones. It is used when a boat has more lighting areas than the base Command Center can manage, such as separating underwater lights, cockpit lighting, cabin accents, or deck lighting into their own controls.\u003c\/p\u003e\u003cp\u003eThe module is IP67-rated and runs on 12V DC only, with a 10-15V DC supply range and a 10A maximum per zone. With supported expansion module combinations, an ECLIPSE lighting system can be built out to as many as 6 independent lighting zones.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdds 1 or 2 extra lighting zones to a Lumishore ECLIPSE Command Center, depending on the selected variant.\u003c\/li\u003e\n\u003cli\u003eCompatible with Lumishore ECLIPSE above-water and underwater lights for mixed lighting layouts across the boat.\u003c\/li\u003e\n\u003cli\u003e12V DC only operation with a 10-15V DC supply range and 10A maximum current per zone.\u003c\/li\u003e\n\u003cli\u003eSupports switch input, WiFi control from a smart device, and control from a certified multifunction display.\u003c\/li\u003e\n\u003cli\u003eZone functions include dimming, color selection, strobe, and sound-to-light operation with RGBW lights.\u003c\/li\u003e\n\u003cli\u003eEach zone can support up to 16 lights when total current draw stays at 10A or less.\u003c\/li\u003e\n\u003cli\u003eIP67 ingress protection with an ABS housing that is flame-retardant and halogen-free.\u003c\/li\u003e\n\u003cli\u003eIncludes surge protection, low-voltage protection, reverse-polarity protection, and ISO 8846 ignition protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe ECLIPSE Expansion Module range is offered in 1-zone and 2-zone configurations for adding lighting areas to the same ECLIPSE control system.\u003c\/p\u003e\u003cp\u003eBoth variants share the same 12V DC supply range, IP67 rating, housing size without cable glands, control options, and compatibility with ECLIPSE above-water and underwater lights. The practical difference is the number of additional zones and total current capacity.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e60-0496: 1-zone expansion module. This version adds 1 extra zone to an ECLIPSE Command Center, bringing the system to 4 zones when fitted to the base Command Center, with 10A available for the added zone.\u003c\/li\u003e\n\u003cli\u003e60-0497: 2-zone expansion module. This version adds 2 extra zones to an ECLIPSE Command Center, bringing the system to 5 zones when fitted to the base Command Center, with 10A available per added zone and 20A total across the two added zones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and control\u003c\/h6\u003e\u003cp\u003eThis module works with the Lumishore ECLIPSE Command Center and ECLIPSE above-water and underwater lights. Control can be handled through a switch input, WiFi control from a smart device, or a certified multifunction display, so the module fits systems controlled locally at the helm or from an onboard screen.\u003c\/p\u003e\u003cp\u003eZone control supports dimming, color selection, strobe, and sound-to-light functions. Sound-to-light operation applies to RGBW lights only, which matters when matching the module to existing fixtures.\u003c\/p\u003e\u003ch6\u003eInstallation and electrical notes\u003c\/h6\u003e\u003cp\u003eThe module uses a plug-and-play setup for adding extra zone outputs to the ECLIPSE system. It should be installed as part of a 12V DC lighting system, with load planning based on the 10A maximum per zone and up to 16 lights per zone when total current draw stays within that limit.\u003c\/p\u003e\u003cp\u003eThe housing measures 116 mm x 84 mm x 39 mm without cable glands and weighs 265 g. The IP67-rated ABS construction is flame-retardant and halogen-free, and the electronics include surge protection, low-voltage protection, reverse-polarity protection, and ISO 8846 ignition protection for demanding boat installations.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003ch6\u003eThis expansion module suits boats that need lighting separated by area or function, such as underwater lights on one zone and cockpit, deck, cabin, or courtesy lighting on separate zones. It is a practical fit for refits where the ECLIPSE Command Center is already in place and the boat owner wants more control without replacing the core lighting controller.\u003c\/h6\u003e","brand":"Lumishore","offers":[{"title":"2","offer_id":51555169173750,"sku":"APL895621-V2","price":399.99,"currency_code":"USD","in_stock":true},{"title":"1","offer_id":51555169206518,"sku":"APL895621-V1","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1337629_apl895621.webp?v=1787852214"},{"product_id":"apl261157","title":"Newmar Power - PX-3 Junction Box","description":"\u003ch4\u003eReliable Waterproof Protection for Your Marine Wiring Needs\u003c\/h4\u003e\u003cp\u003eThe \u003cstrong\u003eNewmar PX-3 Junction Box\u003c\/strong\u003e offers superior waterproof protection for wiring connections, making it ideal for use above or below decks in marine environments. This robust junction box ensures secure and reliable electrical connections, even in areas exposed to occasional spray.\u003c\/p\u003e\u003ch4\u003eGeneral Description\u003c\/h4\u003e\u003cp\u003eDesigned for the challenging conditions of marine environments, the Newmar PX-3 Junction Box provides a watertight and durable solution for wiring connections. Crafted from high-impact polypropylene, this junction box features a snap-on cover that ensures a watertight seal. It is perfect for electronic installations due to its high-quality construction and easy-to-use design.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Protection\u003c\/strong\u003e: IEC Waterproof Rating of IP55 ensures protection against water jets from any direction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Construction\u003c\/strong\u003e: Made from non-corrosive, high-impact polypropylene for enhanced durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure Connections\u003c\/strong\u003e: Equipped with molded nylon connector strips that use screw compression to secure wires without lugs, preventing damage to copper strands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Installation\u003c\/strong\u003e: Features universal cut-to-fit cable entries that accommodate a wide range of cable sizes, with multiple knockouts for conduit access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance\u003c\/strong\u003e: Meets ABYC standards, ensuring safe and reliable marine installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Connector Strips\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions per Strip\u003c\/strong\u003e: 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Wire Gauge\u003c\/strong\u003e: 16\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Entry Ports\u003c\/strong\u003e: 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cable Entries Installed\u003c\/strong\u003e: 7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpare Cable Entries Provided\u003c\/strong\u003e: 0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Diameter Range\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eInches\u003c\/strong\u003e: .14 – .99\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eMillimeters\u003c\/strong\u003e: 3.5 – 25.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Size\u003c\/strong\u003e:\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eInches\u003c\/strong\u003e: 4.45 x 4.45 x 2.29\u003c\/li\u003e\n\u003cli class=\"ql-indent-1\"\u003e\n\u003cstrong\u003eCentimeters\u003c\/strong\u003e: 11.3 x 11.3 x 5.8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Dimensions\u003c\/h4\u003e\u003cp\u003eThe PX-3 Junction Box is compact yet spacious enough to accommodate various wiring needs. Its dimensions (4.45 x 4.45 x 2.29 inches) make it suitable for installation in tight spaces while providing ample room for secure wiring connections.\u003c\/p\u003e\u003ch4\u003eHighlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatertight Seal\u003c\/strong\u003e: Snap-on cover ensures a watertight seal, protecting connections from moisture and spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Materials\u003c\/strong\u003e: Constructed from rugged, non-corrosive polypropylene for long-lasting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Installation\u003c\/strong\u003e: Multiple knockouts and universal cable entries allow for easy and flexible installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe and Secure\u003c\/strong\u003e: Captive screw compression terminals ensure secure connections without damaging the wires.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 Rated\u003c\/strong\u003e: Provides reliable protection against water jets, making it suitable for demanding marine environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplications\u003c\/h4\u003e\u003cp\u003eThe Newmar PX-3 Junction Box is ideal for use in wheelhouses, below decks, and engine rooms, providing a reliable and waterproof solution for marine wiring connections. Its durable and user-friendly design makes it a trusted choice for maintaining the integrity of electrical systems in harsh marine conditions.\u003c\/p\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":51555208298742,"sku":"APL261157","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0717285_apl261157.jpg?v=1787853246"},{"product_id":"apl376459","title":"Lumishore - Garmin MFD Conversion Cable - For MFD Control of EOS Underwater Lights (LM600372)","description":"\u003cp\u003eIntroducing the Limishore - Garmin MFD Conversion Cable - (LM600372), the perfect addition to your marine electronics collection. This conversion cable is specifically designed for the EOS underwater lights and allows for MFD control via Garmin.\u003c\/p\u003e\n\u003cp\u003eWith the Lumi-Link Garmin Conversion Cable, controlling your EOS underwater lights has never been easier. This cable provides seamless integration between your Garmin MFD and your underwater lighting system, giving you complete control over your lighting experience.\u003c\/p\u003e\n\u003cp\u003eThe Limishore - Garmin MFD Conversion Cable - (LM600372) is made from high-quality materials and is built to withstand the harsh marine environment. It is easy to install and use, making it a great choice for both novice and experienced boaters alike.\u003c\/p\u003e\n\u003cp\u003eWhether you are using your boat for fishing, ping, or just cruising around, the Lumi-Link Garmin Conversion Cable for MFD Control of EOS underwater lights is a must-have accessory. It will not only enhance your overall boating experience but also provide added safety and security while on the water.\u003c\/p\u003e\n\u003cp\u003eSo, why wait? Get your Limishore - Garmin MFD Conversion Cable - (LM600372) today and take your boating experience to the next level!\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51555214098678,"sku":"APL376459","price":42.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0355676_apl376459.png?v=1787853630"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-underwater-lights-accessories.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}