{"title":"Vimar Switches","description":"","products":[{"product_id":"apl621763","title":"Vimar Idea 2-Way Switch, 1P, 10 AX, 250 V, 3 Terminals, Central OFF Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16140 is a modular 1-pole 2-way switch for flush-mounted Vimar IDEA installations where you need directional control from one rocker. It uses a 3-terminal layout with directional arrows and a central OFF position, is rated 10 AX at 250 V~, and carries IP40 protection for interior locations.\u003c\/p\u003e\u003cp\u003eOn a boat, this switch fits best in enclosed cabin panels, protected helm stations, and other built-in control points that stay clear of direct spray. The body is made from halogen-free thermoplastic with a matte untreated surface, and it installs with snap fastening in the supporting frame.\u003c\/p\u003e\u003cp\u003eIt also includes a label surface for circuit identification and runs as a non-illuminated switch with no monitoring contact. For self-ballasted lamp loads, the published limit is 100 W.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole 2-way switch with 3 terminals, directional arrows, and a central OFF position\u003c\/li\u003e\n\u003cli\u003e10 AX at 250 V~ for AC switching duties within the stated rating\u003c\/li\u003e\n\u003cli\u003eBuilt-in module with snap fastening for Vimar IDEA flush-mount assemblies\u003c\/li\u003e\n\u003cli\u003eIP40 protection for covered interior panels and other sheltered mounting points\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte surface finish\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit marking and easier panel identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same IDEA switching format.\u003c\/p\u003e\u003cp\u003eAcross both variants, the switching layout stays the same: 1-pole, 10 AX, 250 V~, 3 terminals, central OFF position, built-in snap mounting, and IP40 protection. The visible difference between them is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16140.B: Color Ivory. This version keeps a lighter look on panels and trim where a pale switch finish is preferred.\u003c\/li\u003e\n\u003cli\u003eVM16140: Color Gray. This version suits panels that already use the gray IDEA device color.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis switch is part of the Vimar IDEA series, so it is intended for IDEA-compatible mounting frames, supports, and cover plates. The single-rocker format makes it a straightforward replacement when the rest of the installation already uses the same modular family.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners and installers who need a center-off directional switch in a cabin or enclosed helm panel without changing to a different device range.\u003c\/p\u003e\u003ch6\u003eElectrical and placement\u003c\/h6\u003e\u003cp\u003eThe confirmed rating is for AC service at 250 V~ and 10 AX. For onboard use, that makes it better suited to cabin and helm switching points that stay sheltered, rather than exposed deck locations or washdown areas. IP40 is appropriate where the switch is protected from direct water exposure.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550269767926,"sku":"APL621763-V8","price":29.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550269800694,"sku":"APL621763-V0","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364173_apl013685_jpeg.jpg?v=1787789373"},{"product_id":"apl705215","title":"Vimar Idea IP55 2-Module Surface-Mount Enclosure, For 8000 Special Modules, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13523 is an IP55 surface-mount enclosure for two Vimar Idea modules or two 8000 special modules, used to keep modular switches and outlets protected in splash-prone areas on a boat.\u003c\/p\u003e\u003cp\u003eIt is finished in RAL 7035 grey and comes with two 08491 adaptors for fitting 8000 standard modules. The body is plastic with insulating fill, which suits mounting on insulated panels and helps avoid exposed conductive surfaces around the module area.\u003c\/p\u003e\u003cp\u003eFor fit checks, the enclosure is rated for devices up to 68 mm wide, 83 mm high, and 65 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 protection for locations that see spray and dust, such as cockpits, flybridges, and utility areas\u003c\/li\u003e\n\u003cli\u003eSurface-mount box for adding a 2-module station without cutting a recessed mounting cavity\u003c\/li\u003e\n\u003cli\u003eCompatible with 2 Idea modules or 2 8000 special modules\u003c\/li\u003e\n\u003cli\u003eIncludes two 08491 adaptors to accept 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey housing for a clean, consistent look with common electrical enclosures on board\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with insulating fill for use on insulated bulkheads and panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 enclosure in RAL 7035 grey\u003c\/li\u003e\n\u003cli\u003e2 x 08491 adaptors for 8000 standard modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount on a flat, solid surface with room to access the modules and wiring. In exposed spots, route wiring with a drip loop before it enters the box and seal cable entries with appropriate glands or boots so the IP55 protection is maintained.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is for Vimar Idea modular devices and the 8000 special module footprint. Confirm your devices are 2-module width and stay within the maximum device size so terminals and cable bends do not interfere with closing the enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is commonly used for protected switch points for deck lighting, pumps, and small accessories near companionways, helm stations, wet lockers, and equipment spaces. It suits boats where electrical gear is exposed to occasional spray or washdown, rather than continuous immersion.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550277894390,"sku":"APL705215","price":11.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353487_apl705215_jpeg.jpg?v=1787789532"},{"product_id":"apl557363","title":"Vimar Eikon 20021 Interchangeable 1-Module Rocker Button Cover, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20021 is a 1-module interchangeable rocker button cover that can be lighted, used to finish a matching Eikon switch or push-button control on board.\u003c\/p\u003e\u003cp\u003eIt mounts with a clamp fit and includes a monitoring window\/light outlet, so a status light or locator light can show through when the underlying mechanism supports it. The IP40 rating makes it a good fit for protected interior panels rather than areas exposed to spray, washdowns, or deck weather.\u003c\/p\u003e\u003cp\u003eIn grey, the color matches RAL 7024 (similar) with a matt, untreated surface. The button is made from halogen-free thermoplastic, which suits typical cabin and helm installations where vibration and daily use are common.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module rocker button cover for the Vimar Eikon system\u003c\/li\u003e\n\u003cli\u003eLightable format with monitoring window\/light outlet for visible indication\u003c\/li\u003e\n\u003cli\u003eClamp mounting for a secure fit on the compatible mechanism\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matt finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for interior switch panels and dry technical spaces\u003c\/li\u003e\n\u003cli\u003eOffered in multiple colors and symbol markings to match the panel layout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis button cover is available in three color finishes: grey, silver, and white.\u003c\/p\u003e\u003cp\u003eSymbol options include Standard (no marking), Bell, Light, O\/I, and Key. The symbol choice is used to match the function on a multi-switch panel, so circuits stay recognizable at a glance.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a control element cover, not a complete switch by itself. It is intended to be paired with the compatible 1-module Eikon mechanism and the matching Eikon mounting frame and cover plate system already installed on the boat.\u003c\/p\u003e\u003cp\u003eIf you are mixing finishes on the same panel, confirm the series is Eikon across frames and plates so module sizes and clip points line up correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is typically a front-fit clamp onto the mechanism after wiring is complete and power is isolated. Check that the rocker pivots freely and that the monitoring window aligns with any indicator or illumination point behind it.\u003c\/p\u003e\u003cp\u003eWhen used in a helm or cabin switch bank, place it where it stays out of direct spray and where routine cleaning will not force water into the mechanism area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of rocker cover is commonly used for cabin lighting, courtesy lights, freshwater pump control, electronics master switching, and other circuits that benefit from clear panel labeling. Symbol versions are especially helpful on boats with multiple identical modules in a tight switch row.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where the boat already uses Vimar Eikon modules and you want consistent markings and finishes across a new or expanded switch panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild cleaner. Avoid solvent-based products that can haze plastic surfaces. If the area sees frequent condensation, keep the panel ventilated and address any moisture at the mechanism level rather than relying on the button cover for sealing.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ Standard","offer_id":51550278156534,"sku":"APL557363-V6","price":4.45,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Key","offer_id":51550278189302,"sku":"APL557363-V98","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ O\/I","offer_id":51550278222070,"sku":"APL557363-V32","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ O\/I","offer_id":51550278254838,"sku":"APL557363-V47","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Grey \/ O\/I","offer_id":51550278287606,"sku":"APL557363-V1","price":4.05,"currency_code":"USD","in_stock":true},{"title":"White \/ Key","offer_id":51550278320374,"sku":"APL557363-V30","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Key","offer_id":51550278353142,"sku":"APL557363-V05","price":4.85,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Light","offer_id":51550278385910,"sku":"APL557363-V0","price":5.04,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Standard","offer_id":51550278418678,"sku":"APL557363-V9","price":3.9,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Bell","offer_id":51550278451446,"sku":"APL557363-V4","price":4.21,"currency_code":"USD","in_stock":false},{"title":"White \/ Standard","offer_id":51550278484214,"sku":"APL557363-V3","price":3.9,"currency_code":"USD","in_stock":true},{"title":"White \/ Light","offer_id":51550278516982,"sku":"APL557363-V2","price":4.21,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Light","offer_id":51550278549750,"sku":"APL557363-V7","price":4.05,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Bell","offer_id":51550278582518,"sku":"APL557363-V5","price":4.85,"currency_code":"USD","in_stock":true},{"title":"White \/ Bell","offer_id":51550278615286,"sku":"APL557363-V8","price":4.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363282_apl557363_jpeg.jpg?v=1787789539"},{"product_id":"apl619452","title":"Vimar Idea 17086 1-Module Mounting Frame, For 60 mm or 56x56 mm Flush Boxes, For 09971 Surface Boxes, Smooth Front, Without Screws, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 17086 is a 1-module mounting frame with a smooth front and no visible fixing screws, made for round or square flush mounting boxes with 60 mm fixing centres and 56x56 mm boxes, as well as 09971 surface mounting boxes.\u003c\/p\u003e\u003cp\u003eOn board it is used to seat a single Vimar IDEA modular device cleanly in a bulkhead or panel, keeping the front tidy around lighting and accessory controls in cabins, heads, and helm stations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module frame for Vimar IDEA modular wiring devices\u003c\/li\u003e\n\u003cli\u003eSmooth front with no visible fixing screws once the cover plate is fitted\u003c\/li\u003e\n\u003cli\u003eFits round or square flush boxes with 60 mm fixing centres and 56x56 mm flush boxes\u003c\/li\u003e\n\u003cli\u003eCompatible with 09971 surface mounting boxes\u003c\/li\u003e\n\u003cli\u003eThermoplastic body suited to interior marine panels and trim\u003c\/li\u003e\n\u003cli\u003eModule inserts mount from the back side and can be oriented horizontally or vertically\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis mounting frame is offered in two colour configurations to match different IDEA finishes.\u003c\/p\u003e\u003cp\u003eColour changes between variants; the 1-module format and box compatibility stay the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM17086.B: Color Ivory. A light finish that blends with white or light trim around switches and outlets.\u003c\/li\u003e\n\u003cli\u003eVM17086: Color Gray. A neutral finish that matches gray plates and tends to hide handling marks in high-touch areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eConfirm your box type and fixing centres before cutting or drilling. This frame is intended for 60 mm centre spacing and also works with 56x56 mm flush boxes, plus the 09971 surface box. The frame fastens to the box, then the 1-module device is secured from the rear and finished with the matching cover plate.\u003c\/p\u003e\u003cp\u003eWhen installing on a boat, use a backing plate or a firm panel surface so the frame stays flat. That helps the cover plate sit evenly and avoids movement when the panel flexes underway.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush-mount frame, not a floor box accessory and not a DIN-rail mounting part. It is intended for the Vimar IDEA modular system, so match the frame, device, and cover plate within the same family and in a 1-module format.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550278811894,"sku":"APL619452-V6","price":3.55,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550278844662,"sku":"APL619452-V5","price":3.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364893_apl619452_jpeg.jpg?v=1787789575"},{"product_id":"apl305610","title":"Vimar Flush Mounting Box, 60 mm, For Masonry Walls, Halogen-Free Plastic, 50 mm Inner Depth, 20\/25 mm Conduit, 5 Inlets","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar flush mounting box ø 60mm is a round flush-mounted box for masonry-wall installations, with a 60 mm diameter, 50 mm inner depth, five inlets, and rear entry for 20\/25 mm conduit. It is made from halogen-free plastic and uses break-out openings for pipe entry.\u003c\/p\u003e\u003cp\u003eIt works as the rough-in box behind flush-mounted electrical devices where space, conduit routing, and box depth need to be checked before closing the wall. The housing is couplable for side-by-side layouts, carries an IP00 rating, and accepts anti-mortar and decorative covers when those accessories are part of the installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e60 mm round body with 50 mm inner depth for flush mounting in masonry walls\u003c\/li\u003e\n\u003cli\u003eFive inlets plus rear entry, with break-out openings for 20\/25 mm conduit\u003c\/li\u003e\n\u003cli\u003eCouplable housing for aligned multi-box layouts\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with IP00 protection for enclosed installations behind the finished device\u003c\/li\u003e\n\u003cli\u003eAvailable in two versions that change color and glow-wire rating: light blue at 650 °C and black at 960 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations that share the same round 60 mm format and flush-mounted construction.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the box color and glow-wire rating. Diameter, inner depth, five-inlet layout, rear entry, 20\/25 mm conduit compatibility, couplable body, halogen-free plastic construction, and IP00 protection remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMV71001: light blue version with a 650 °C glow-wire rating. It keeps the same box size and conduit entry format as the other version.\u003c\/li\u003e\n\u003cli\u003eVMV71001.AU: black version with a 960 °C glow-wire rating. It uses the same flush-mounted form factor and accessory compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis box is made for flush mounting in masonry walls, so the wall build and available depth should be checked before ordering. It is not a hollow-wall box and it is not a surface-mount enclosure.\u003c\/p\u003e\u003cp\u003eFor boat projects, that usually limits it to protected interior work where the structure accepts this style of flush box and the final device or trim covers the open front. Because the housing is IP00, it should stay out of exposed spray areas and any location that depends on the box itself for water protection.\u003c\/p\u003e\u003ch6\u003eAccessories and finishing\u003c\/h6\u003e\u003cp\u003eAnti-mortar covers and decorative covers are available for this box. That is useful when rough-in happens before final trim-out or when the finished installation needs a matching cover once wiring is complete.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box suits interior electrical refit work where a 60 mm flush box is already part of the plan and where conduit entry from the rear or side knockouts matters. It is a practical match for installers who need to keep the same opening size across the range while selecting between two glow-wire ratings.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Glow Wire 650\/Light Blue","offer_id":51550281367798,"sku":"APL305610-2","price":0.65,"currency_code":"USD","in_stock":true},{"title":"Glow Wire 960\/Black","offer_id":51550281400566,"sku":"APL305610-0","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827974_apl305610.jpg?v=1787789660"},{"product_id":"apl853774","title":"Vimar Incandescent Lamp, 24V, 3W, 7x31mm, White Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07055 is a 24 V, 3 W incandescent festoon lamp in the 7 mm by 31 mm format for small onboard illumination points and indicator modules that use this lamp size.\u003c\/p\u003e\u003cp\u003eIt produces white light and fits holders that accept a 31 mm festoon with a lamp body around 8 mm by 15 mm, which matters when the lamp sits behind a tight lens or switch window. This is a straightforward replacement part for keeping compatible controls and small fixtures readable on 24 V DC systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e24 V, 3 W incandescent lamp for 24 V DC circuits\u003c\/li\u003e\n\u003cli\u003eFestoon size: 7 mm diameter and 31 mm length\u003c\/li\u003e\n\u003cli\u003eLamp body section around 8 mm by 15 mm for clearance behind lenses and caps\u003c\/li\u003e\n\u003cli\u003eWhite light output for indicator windows and small task points\u003c\/li\u003e\n\u003cli\u003eIncandescent lamp works on DC without polarity sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eMatch the lamp type and size to what is already installed. Festoon holders vary by length, and a few millimeters can decide whether the end contacts seat properly and whether the cover closes without pressure on the glass.\u003c\/p\u003e\u003cp\u003eConfirm the holder supports the 31 mm festoon length and that the lamp body clears any diffuser, lens, or switch window. If the old lamp shows heat marks on the lens, check there is enough clearance and ventilation before fitting the new one.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis lamp is for nominal 24 V systems. On 12 V it will glow weakly; on higher voltage it will have a short life and can overheat the fixture.\u003c\/p\u003e\u003cp\u003eAt 24 V and 3 W, current draw is about 0.13 A. Make sure the circuit and contacts are clean and snug so vibration does not cause flicker.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTurn off power at the panel and let the fixture cool before handling the lamp. Remove the cover or module window as required, then lift the festoon out of its spring contacts and seat the new lamp evenly so both ends are fully engaged.\u003c\/p\u003e\u003cp\u003eAfter reinstalling the lens or cover, power the circuit back up and check for steady light. If it flickers underway, the holder contacts usually need cleaning or a slight re-tensioning.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis lamp makes sense on boats and yachts that run 24 V DC and use small indicator lights in switch panels, control stations, or compact interior fixtures where the 7 x 31 mm festoon format is used. It is also a good match when you want the same look and output as the original incandescent lamp rather than switching the fixture to LED.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eSalt air and humidity can leave a film on contacts over time. If a lamp change does not restore steady operation, clean the end contacts and the holder springs, and inspect for heat-darkened lenses that can reduce visibility.\u003c\/p\u003e\u003cp\u003eKeeping a spare on board helps for panel indicators and small utility lights, especially on offshore runs where a quick swap is easier than troubleshooting a dim or intermittent lamp at night.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550293852406,"sku":"APL853774","price":6.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826816_apl-npj-xsa-fdx.jpg?v=1787789999"},{"product_id":"apl600575","title":"Vimar Arke Axial 1-Way Switch, Single Pole, 16AX, 250V AC, Illuminable, 2-Module, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM19101 is a 1-pole, 1-way axial switch mechanism for the Arké modular system, rated 16 AX at 250 V~ and suitable for loads up to 200 W for self-ballasted lamps.\u003c\/p\u003e\u003cp\u003eIt takes up two modules in a Vimar Arké frame and sits behind your chosen cover plate to build consistent switch banks around the boat, such as at a cabin entry panel, at the helm console, or in a galley switch cluster. The axial rocker action feels familiar in use, and the button is replaceable, which helps when you are matching surrounding devices or updating legends during a refit.\u003c\/p\u003e\u003cp\u003eThis is a standard in-panel switching mechanism, so plan to mount it in a protected location inside an electrical panel or enclosure, away from direct spray and routine washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P\/1-way (on\/off) switching for controlling a single circuit from one location\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating; supports up to 200 W self-ballasted lamps\u003c\/li\u003e\n\u003cli\u003e2-module format to lay out multi-gang panels within the Vimar Arké modular system\u003c\/li\u003e\n\u003cli\u003eLightable mechanism so a compatible locator or indicator light can be added when needed\u003c\/li\u003e\n\u003cli\u003eReplaceable rocker button for cleaner labeling and a consistent look across the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis mechanism installs into a Vimar Arké mounting frame and back box like other Arké devices, then is finished with a matching cover plate. Wiring is the standard 1-way arrangement (line in and switched line out); verify conductor sizing and overcurrent protection match the circuit and your vessel’s electrical practices.\u003c\/p\u003e\u003cp\u003eWhen planning a multi-device panel, keep module count in mind: this switch uses two modules, so it pairs cleanly with other 2-module Arké components in shared cover plates.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eA good match for boats already built out with Vimar Arké, or for new interior panels where you want the same frames, devices, and cover plates throughout. If you need switching in an exposed exterior location, use an appropriate sealed switch or relocate the device to a protected panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon uses include interior lighting circuits, ventilation controls, and other on\/off loads where you want a tidy, flush panel. The illumination capability is handy on night passages when you want to find the switch quickly without turning on overhead lights.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550306697462,"sku":"APL600575","price":9.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281427_apl600575_jpeg.jpg?v=1787790431"},{"product_id":"apl815207","title":"Vimar EIKON 2-Module Two-Rocker Push Buttons, Marine Version, Illuminated, 29V, IP40, Grey (RAL 7024)","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMR20523 is a 2-module EIKON-series control device with two rocker push buttons for domestic switching functions on board. It is rated for a nominal 29 V and supports integrated lighting for better visibility when the cabin lights are down.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt, untreated surface in grey (RAL 7024). With an IP40 rating, it is intended for protected interior locations where it will not be exposed to washdowns or direct spray. This mechanism is completed with interchangeable 1- or 2-module button covers, which are selected separately to match your labeling and layout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module device with two rocker push buttons for EIKON modular installations\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 29 V\u003c\/li\u003e\n\u003cli\u003eIntegrated lighting support to help the control stay visible in low-light cabins\u003c\/li\u003e\n\u003cli\u003eFlush-mount installation with snap fastening for quick, clean panel integration\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with matt, untreated finish\u003c\/li\u003e\n\u003cli\u003eGrey color matched to RAL 7024\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for dry, sheltered onboard mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 44.8 mm wide, 49.0 mm high, 36.1 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis unit is meant to sit in a flush-mounted EIKON position and snap into place as part of the modular assembly. Plan for at least 36.1 mm of depth behind the mounting surface, plus room for wiring bend radius so the mechanism does not get stressed when the panel is secured.\u003c\/p\u003e\u003cp\u003eBecause the front is finished with separate interchangeable button covers, confirm you have the correct 1- or 2-module cover style for your panel layout before closing up the installation. The lighting feature is most useful at helm and cabin panels where the control needs to be located quickly at night.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eIt occupies two EIKON modules and is intended for builds that use the EIKON modular format and matching cover plates and button covers. When replacing an existing device, check that your current frame and aesthetics are EIKON-based and that your chosen covers match the function you want to label at the switch position.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of two-rocker control is commonly used at interior switch panels for cabin or courtesy lighting, zoned circuits, and other onboard switching tasks where a compact two-button layout keeps the panel tidy. It is a good match for boats standardizing on EIKON components in grey and keeping controls in protected areas rather than exposed cockpits or open decks.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the surface with a soft cloth and mild cleaner as needed, and avoid harsh solvents that can mark thermoplastic finishes. If a switch position feels loose over time, recheck the snap engagement and wiring strain relief so vibration does not work the mechanism free.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550307025142,"sku":"APL815207","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827165_apl-ohy-vvf-cfo.jpg?v=1787790454"},{"product_id":"apl930024","title":"Vimar Arké Interchangeable Buttons for RF Switches, For EnOcean, Bluetooth and ZigBee RF Devices, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Arké 19506 is an interchangeable button range for compatible EnOcean, Bluetooth, and ZigBee radiofrequency devices. It covers both 1-module and 2-module layouts in Grey, Metal, and White finishes, so the visible control point can be matched to the rest of an Arké interior installation without changing the underlying RF system.\u003c\/p\u003e\u003cp\u003eThis is the visible button and cover element, not the electronic radio device itself. The listed 1-module versions measure 44.7 x 44.4 x 6.4 mm, while the listed 2-module versions measure 44.5 x 44.4 x 6.7 mm. On a boat, that makes this range more relevant for compact interior switch positions where finish, layout, and compatibility with the existing Arké RF setup matter as much as the control function.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable front button range for compatible Arké EnOcean, Bluetooth, and ZigBee RF control devices\u003c\/li\u003e\n\u003cli\u003eAvailable in 1-module and 2-module formats to match the underlying control layout\u003c\/li\u003e\n\u003cli\u003eFinish options across the range include Grey, Metal, and White\u003c\/li\u003e\n\u003cli\u003e1-module versions are supplied as 2-piece button sets, while 2-module versions use the wider 2-module format\u003c\/li\u003e\n\u003cli\u003eGrey and white variants use thermoplastic construction with a matt finish and are halogen-free\u003c\/li\u003e\n\u003cli\u003eMetal variants use lacquered thermoplastic with a matt aluminium-colour finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range changes by two main attributes: finish and module width. Finish options are Grey, Metal, and White, and each finish is available in either a 1-module or 2-module version.\u003c\/p\u003e\u003cp\u003eThe 1-module versions use the narrower format and are supplied as 2-piece button sets. The 2-module versions use the wider button format for matching 2-module RF control points. Across the range, the intended use stays centered on Arké radiofrequency controls for EnOcean, Bluetooth, and ZigBee devices, while the visible difference is mainly the width and finish.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis range is the front button piece for the Arké RF device family. It does not replace the electronic insert behind the button, and it is not the surrounding frame. That matters on refits and repairs where the boat already has Arké hardware in place and only the visible button needs to be replaced or updated.\u003c\/p\u003e\u003cp\u003eCheck the existing module width before ordering. A 1-module position and a 2-module position are different physical formats, and the finish change is cosmetic rather than a change to the radio standard or operating logic.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor marine installations, this range makes the most sense in protected interior spaces such as cabins, saloons, enclosed helm consoles, and service panels where RF switching is already part of the fit-out. The grey and white variants are rated IP40, which points them to dry locations rather than open cockpits, exterior bulkheads, or any area that sees regular spray or washdowns.\u003c\/p\u003e\u003cp\u003eIt is a sensible match for boats that already use Vimar Arké controls and need a replacement button face, a different finish, or a consistent look across several interior control points. The Metal option gives an aluminium-colour appearance, while Grey and White keep a more standard Arké finish.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"1 Module \/ White","offer_id":51550334550262,"sku":"APL930024-V1","price":4.42,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Metal","offer_id":51550334583030,"sku":"APL930024-V7","price":5.4,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ Metal","offer_id":51550334615798,"sku":"APL930024-V5","price":5.4,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ Grey","offer_id":51550334648566,"sku":"APL930024-V6","price":4.42,"currency_code":"USD","in_stock":false},{"title":"1 Module \/ Grey","offer_id":51550334681334,"sku":"APL930024-V9","price":4.42,"currency_code":"USD","in_stock":false},{"title":"2 Module \/ White","offer_id":51550334714102,"sku":"APL930024-V8","price":4.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363150_apl930024_jpeg.jpg?v=1787791192"},{"product_id":"apl483261","title":"Vimar Eikon Push Button Switch, 1P NO, 10A 250V, With Indicator Unit, Flush-Mount, IP40, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20068 is a 1-pole, normally open momentary push button rated 10 A at 250 V~ with an indicator window for a signalling unit. It is a flush-mounted module that snaps into compatible frames and cover plates, with a front protection rating of IP40 and a compact body size of 22.30 mm wide, 49.00 mm high, and 38.50 mm deep.\u003c\/p\u003e\u003cp\u003eThis style of push button is commonly used on boats for momentary control and signalling, such as triggering a relay, sounding a buzzer, or sending a control input to another device, while the indicator window can be used to show status once a compatible signalling unit is installed. IP40 is suited to protected interior areas like cabins, nav stations, and inside consoles, not exposed locations where spray, washdowns, or heavy condensation are expected.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO momentary contact (closes only while pressed), rated 10 A at 250 V~\u003c\/li\u003e\n\u003cli\u003eIntegrated indicator window with diffuser; signalling unit is not included\u003c\/li\u003e\n\u003cli\u003eFlush-mounted module with engage (snap) fastening for modular installations\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior, dry mounting locations\u003c\/li\u003e\n\u003cli\u003eCompact body: 22.30 mm width, 49.00 mm height, 38.50 mm depth\u003c\/li\u003e\n\u003cli\u003eSingle rocker layout with label space to identify the circuit or function\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis push button is offered in multiple configurations so you can match the faceplate finish and the indicator color used in the installation.\u003c\/p\u003e\u003cp\u003eThe finish and the indicator diffuser color are what change between versions. The contact type and electrical rating (1P NO, 10 A at 250 V~), IP40 protection, and the 22.30 x 49.00 x 38.50 mm body size remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20068.B.N: Finish Silver; Indicator White Indicator. This version matches silver-themed installations and keeps the indicator window a neutral white.\u003c\/li\u003e\n\u003cli\u003eVM20068.B: Finish Grey; Indicator White Indicator. A grey finish works well in darker panels and helm areas where glare and contrast are a concern.\u003c\/li\u003e\n\u003cli\u003eVM20068.B.B: Finish White; Indicator White Indicator. A white finish blends into light-colored bulkheads and switch panels, with a white diffuser for the indicator window.\u003c\/li\u003e\n\u003cli\u003eVM20068.V.B: Finish White; Indicator Green Indicator. A green indicator diffuser helps separate a function from other white indicators on the same panel, such as status or enable signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan this as a flush-mounted installation in a suitable back box, then snap the module into the compatible frame before fitting the cover plate. Allow for the 38.50 mm device depth and enough room for wire bends and terminations behind the switch.\u003c\/p\u003e\u003cp\u003eIf you want the indicator to illuminate, the unit is supplied without the signalling unit, so the lighting component needs to be selected and installed separately as part of the system.\u003c\/p\u003e\u003ch6\u003eElectrical and on-board use\u003c\/h6\u003e\u003cp\u003eWith a 10 A rating at 250 V~, this push button can be used on onboard AC circuits within that limit, and it is also commonly used as a low-current control input for relays or contactors when you do not want the load current passing through the panel device. Because it is normally open and momentary, any function that needs to stay on typically relies on the controlled equipment, a relay, or a separate latching circuit.\u003c\/p\u003e\u003ch6\u003eTypical uses on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for interiors that already use Vimar Eikon modular switchgear and need a clean momentary control with an optional status indicator. It fits well for refits where you are standardizing panel controls across cabins, galley, nav station, and protected helm areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the front face clean with a soft cloth and avoid solvents that can haze plastics. In humid environments, place the device in a protected panel location and keep wiring compartments ventilated to reduce condensation around electrical terminations.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White Indicator \/ White","offer_id":51550335566070,"sku":"APL483261-V5","price":31.25,"currency_code":"USD","in_stock":true},{"title":"Green Indicator \/ White","offer_id":51550335598838,"sku":"APL483261-V6","price":31.25,"currency_code":"USD","in_stock":false},{"title":"White Indicator \/ Silver","offer_id":51550335631606,"sku":"APL483261-V1","price":35.25,"currency_code":"USD","in_stock":true},{"title":"White Indicator \/ Grey","offer_id":51550335664374,"sku":"APL483261-V3","price":32.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1269417_apl483261_jpeg.jpg?v=1787791264"},{"product_id":"apl266135","title":"Vimar Eikon Blank Module, 1 Module, Flush Mount, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20041 Blank Module is a 1-module blank insert for closing an unused opening in a flush-mounted Eikon switch or outlet assembly. It has a 22.30 x 49.00 x 20.50 mm body, built-in mounting, and claw fastening, so it sits in the same modular layout as the active devices around it rather than leaving an open space in the panel.\u003c\/p\u003e\u003cp\u003eThis is a non-electrical component with nominal voltage listed at 0 V, so its job is purely to finish the layout and keep the face of the panel clean and consistent. The body is thermoplastic, halogen-free, and finished in matte white, grey, or silver depending on the variant. On board, it makes sense anywhere a helm panel, cabin switch bank, or interior control point has an unused 1-module position that still needs a finished look.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1-module blank insert for unused openings in Vimar Eikon modular assemblies\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBody size of 22.30 x 49.00 x 20.50 mm for standard 1-module fit within the range\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in mounting with claw fastening for flush-mounted installations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThermoplastic construction that is halogen-free\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMatte front surface with label space on the module face\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNon-electrical insert with nominal voltage 0 V and no monitoring contact\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple colour configurations within the same 1-module blank insert format.\u003c\/p\u003e\u003cp\u003eAcross the range, the size, 1-module layout, built-in mounting, claw fastening, thermoplastic body, halogen-free construction, matte appearance, and front label surface stay consistent. The main difference is the visible finish, with white, grey, and silver options for matching nearby plates and devices.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eVM20041.B: White. This version keeps the panel light in appearance and suits layouts built around white Eikon plates and devices.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM20041: Grey. This version matches grey Eikon layouts and keeps unused module positions visually consistent with darker switch panels.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eVM20041.N: Silver. This version uses the silver Next finish for installations built around silver-toned Eikon trim and devices.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis blank module is a good match for installations that already use the Vimar Eikon modular system and need to close a spare 1-module opening without changing the frame layout. It is most useful during refits, when a device has been removed, or when extra module space is being left available for later expansion.\u003c\/p\u003e\u003cp\u003eBefore ordering, check the series, module count, and panel finish already on the boat. The blank module matches the Eikon family and fits a single module position, so it should be paired with the correct Eikon support and cover plate arrangement already in the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBecause this is a built-in insert with claw fastening, it is suited to flush panel work where you want the face of the assembly to stay neat and even. There is no circuit function to wire, which makes it a straightforward way to finish a panel opening while keeping access to the same modular layout for future changes.\u003c\/p\u003e\u003cp\u003eIt is a sensible option for boat owners, installers, and yards tidying up helm stations, cabin switch banks, or interior panels after equipment changes. It also works when a new panel is being built in stages and one module position needs to stay closed until another device is added later.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver","offer_id":51550336155894,"sku":"APL266135-V5","price":2.95,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":51550336188662,"sku":"APL266135-V7","price":2.4,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550336221430,"sku":"APL266135-V0","price":2.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363355_apl266135_jpeg.jpg?v=1787791297"},{"product_id":"apl214541","title":"Vimar Idea RJ45 R\u0026M IBM Adaptor, For R\u0026M Freenet and IBM Type C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16365 is an RJ45 adaptor for R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connectors within the IDEA modular range. It is used where a data connection needs to sit neatly in a switch or outlet position, with front label space that helps identify the run, outlet, or connected system.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this kind of adaptor makes sense at a navigation station, cabin communications point, helm console, or service panel where structured cabling is already part of the installation. The listed device depth is 21.0 mm on both variants, and the device height varies by colour, with 50.1 mm for the ivory version and 45.0 mm for the gray version.\u003c\/p\u003e\u003cp\u003eThis is an adaptor rather than a complete data outlet, so the main fit check is the connector family already used in the vessel and the matching IDEA mounting system around it. The open front and the absence of a hinged lid keep the port easy to access for patching, inspection, and relabelling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAccepts RJ45 connector formats used in R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C installations\u003c\/li\u003e\n\u003cli\u003eMade for the Vimar IDEA modular range\u003c\/li\u003e\n\u003cli\u003eFront label space helps identify cabin outlets, network runs, or onboard systems\u003c\/li\u003e\n\u003cli\u003eNo hinged lid, so the connection point stays easy to reach and inspect\u003c\/li\u003e\n\u003cli\u003e21.0 mm device depth on both variants, which helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eAvailable in two colour finishes to match surrounding trim and switchgear\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in two colour configurations.\u003c\/p\u003e\u003cp\u003eThe colour changes between variants. Both versions are RJ45 adaptors for the same R\u0026amp;M Freenet system and IBM Advanced Connectivity System Type C connector families, both include label space, both have no hinged lid, and both are listed with a 21.0 mm device depth. The listed device height differs between the two colours.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16365.C.B, Color: Ivory. This lighter finish suits interior panels and trim where the surrounding hardware is off-white or cream in tone.\u003c\/li\u003e\n\u003cli\u003eVM16365.C, Color: Gray. This darker finish blends more easily with gray switch frames, utility panels, and technical spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm that the RJ45 connector format in your installation matches R\u0026amp;M Freenet system or IBM Advanced Connectivity System Type C. It is also worth checking that the mounting position on the boat uses the IDEA series format and that the back box or panel depth is suitable for a 21.0 mm device body.\u003c\/p\u003e\u003cp\u003eThis product is a good match for boats with structured data cabling in the cabin, chart table, or electronics console, especially where a clean panel finish and clear circuit identification matter as much as connector compatibility.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eBecause the front stays open and there is no lid, this adaptor is better suited to enclosed interior locations where the connection needs to stay accessible. It works well in places where crew or service technicians may need to patch a network lead, trace a cable run, or identify a connection quickly during refit and maintenance work.\u003c\/p\u003e\u003cp\u003eFor a tidy result, pair the adaptor with the correct surrounding module and keep the outlet label consistent with the vessel's network or systems map. That small detail saves time later when tracing data lines behind helm panels or cabin joinery.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550336450806,"sku":"APL214541-V8","price":14.29,"currency_code":"USD","in_stock":false},{"title":"Ivory","offer_id":51550336483574,"sku":"APL214541-V3","price":13.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364399_apl214541_jpeg.jpg?v=1787791321"},{"product_id":"apl486863","title":"Vimar Push Button Switch, For Refrigerator, 1-Pole NC, 250VAC, 60W, Pillar Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM00900 is a 1-pole normally closed (NC) push button rated 250 V AC and 60 W (0.24 A), with screw-type pillar terminals and a white finish with a matte surface.\u003c\/p\u003e\u003cp\u003eBecause it is normally closed, the circuit stays closed at rest and opens when you press the button. That behavior is commonly used for control and interlock functions on board, including refrigerator control circuits where a button press needs to interrupt the circuit.\u003c\/p\u003e\u003cp\u003eIt fastens with screws and uses a shallow 10 mm built-in depth, which helps when you are working in tight helm, galley, or locker panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, normally closed (NC) push button action\u003c\/li\u003e\n\u003cli\u003eRated 250 V AC, 60 W (0.24 A nominal)\u003c\/li\u003e\n\u003cli\u003eScrew-type pillar terminals for straightforward terminations\u003c\/li\u003e\n\u003cli\u003eScrew-mounted fastening with 10 mm built-in depth\u003c\/li\u003e\n\u003cli\u003eNon-illuminated button with no imprint for simple panel labeling\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a matte surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eKeep the switched circuit within the 60 W rating at 250 V AC. For anything that draws more than that, use the button to switch a relay, contactor, or control input instead of feeding the load directly through the contacts.\u003c\/p\u003e\u003cp\u003eTerminate conductors fully under the screw terminals, then support the wiring so vibration or a tug on the cable cannot work the connection loose. Always isolate shore power and inverter feeds before opening an AC panel.\u003c\/p\u003e\u003ch6\u003eMaterials and placement\u003c\/h6\u003e\u003cp\u003eThe thermoplastic housing suits interior electrical spaces. Mount it where it stays out of washdowns and spray, and keep the back of the unit away from areas where condensation can collect.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis push button suits refits where you need a compact NC momentary contact for a refrigerator circuit, a safety interlock, or a service stop function in a small control box. It also works well when you are standardizing controls across a boat and want a consistent look in white.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550339629302,"sku":"APL486863","price":6.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826576_apl-mzk-qxw-iqh.jpg?v=1787791363"},{"product_id":"apl531538","title":"Vimar Plana 1P NC Pushbutton Mechanism, 10A 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14010.0 is a Plana-series 1-pole, normally-closed (NC) push button mechanism rated 10 A at 250 V AC, and it accepts a locator or indicator light when paired with a compatible light module. In NC operation the circuit is closed at rest and opens while you press the button, then returns to closed when released.\u003c\/p\u003e\u003cp\u003eThis mechanism is meant for flush mounting in Plana modular plates and is completed with a 1-, 2- or 3-module button. With an IP40 protection rating, it belongs in protected interior locations such as a cabin switch panel, nav station, or inside a console, not in areas exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole NC momentary contact: circuit opens only while the button is pressed\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A at 250 V AC for circuits that stay within the switch rating\u003c\/li\u003e\n\u003cli\u003eLightable mechanism that supports adding an indicator or locator light with a compatible light module\u003c\/li\u003e\n\u003cli\u003eCompletes with 1-, 2- or 3-module Plana button to match common modular panel layouts\u003c\/li\u003e\n\u003cli\u003eFlush-mounted form factor with snap-in fastening for quick installation in the support\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with glossy white finish (RAL 9003)\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, enclosed spaces behind a panel\u003c\/li\u003e\n\u003cli\u003eCompact size: 22.3 mm wide, 49.0 mm high, 38.7 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is part of the Vimar Plana modular system. It is intended to be finished with a matching Plana button and installed into the appropriate Plana mounting support and cover plate format for your panel.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003ePlan the function first: an NC push button is commonly used where the circuit should remain closed until someone presses the button, such as an alarm loop, interlock, or a control input that needs to open on command. For switching loads directly, confirm the load type and switching current are within the 10 A, 250 V AC rating and that your enclosure and wiring are suitable for the circuit on board.\u003c\/p\u003e\u003cp\u003eOnce installed, the engage snap fastening holds the mechanism in place. After a few trips, it is worth re-checking terminal tightness since boats see vibration and temperature swings.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits or new builds that already use Plana modules in interior panels and want a push button that keeps the panel tidy and stays easy to service. If the mounting spot is anywhere that regularly sees salt spray, rain, or washdowns, a sealed, higher-IP device is the better fit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face and surrounding plate clean and dry, and avoid aggressive solvents that can haze glossy plastics. In technical spaces, a quick periodic check for moisture ingress and corrosion at the terminals helps prevent intermittent faults.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550345134326,"sku":"APL531538","price":13.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826955_apl-r3s-vch-xev.jpg?v=1787791635"},{"product_id":"apl758266","title":"Vimar IDEA Series General Symbol Push Button, 1P NO, 10A, 250V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar IDEA Series is a range of 1P normally open push buttons with a general symbol for flush-mounted modular installations. Across the listed versions, the rating is 10 A at 250 V, the front size is 21.8 mm wide by 50.1 mm high, and the body clips into place with snap fastening.\u003c\/p\u003e\u003cp\u003eThis type of switch suits protected interior panels where the vessel is already built around the IDEA modular system. The housing is halogen-free thermoplastic with a matt finish and IP40 protection, and depth varies by version, with standard 1-module buttons at about 36.5 mm and the 2-module or luminous versions at 32.5 mm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO push button with general symbol, rated 10 A at 250 V\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular format with snap-in fastening for IDEA system installations\u003c\/li\u003e\n\u003cli\u003eCompact face size of 21.8 mm x 50.1 mm, with shallow depth that helps when panel space is limited\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt surface and label area\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003cli\u003eRange includes grey or white finishes, 1-module and 2 reduced-module formats, plus luminous versions for signalling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes in three ways: colour, module format, and whether the button is arranged for illumination. Standard versions are available in grey or white as a 1-module device, and there are also grey and white versions that occupy 2 reduced modules.\u003c\/p\u003e\u003cp\u003eThe luminous versions are 1-module buttons in grey or white and are intended for use with a signalling unit, which is not included. The 10 A 250 V rating, single push-button operation, matt finish, halogen-free thermoplastic body, and IP40 protection stay the same across the listed versions.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good match when the boat or refit already uses Vimar IDEA supports, frames, and matching modules. Before ordering, check the panel layout for 1-module or 2 reduced-module spacing, confirm the finish you want, and verify the available depth behind the mounting point.\u003c\/p\u003e\u003cp\u003eBecause protection is IP40, it is better suited to protected cabin panels, interior helm areas, and technical spaces than to exposed deck locations or areas that see regular washdowns. For luminous versions, the signalling unit needs to be added separately during assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe built-in format keeps the front neat and works well where several controls need to sit in one modular frame. The general symbol keeps the function neutral, which is useful on vessels where the same switch style is used across cabins, service panels, and protected control positions.\u003c\/p\u003e\u003cp\u003eIt also makes sense for owners and yards replacing one worn module without changing the rest of an existing IDEA installation. Matching the module width and colour is usually the main point to confirm before fitting.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey\/Indicator \/ 1 Module","offer_id":51550348640502,"sku":"APL758266-7","price":18.19,"currency_code":"USD","in_stock":false},{"title":"White \/ 2 Modules","offer_id":51550348673270,"sku":"APL758266-1","price":22.5,"currency_code":"USD","in_stock":false},{"title":"White \/ 1 Module","offer_id":51550348706038,"sku":"APL758266-6","price":15.59,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 2 Modules","offer_id":51550348738806,"sku":"APL758266-0","price":23.39,"currency_code":"USD","in_stock":false},{"title":"White\/Indicator \/ 1 Module","offer_id":51550348771574,"sku":"APL758266-2","price":17.5,"currency_code":"USD","in_stock":false},{"title":"Grey \/ 1 Module","offer_id":51550348804342,"sku":"APL758266-9","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828607_apl758266.jpg?v=1787791785"},{"product_id":"apl182765","title":"Vimar Eikon Socket Outlet, Italian Standard P17\/11, 2P+E, 16A, 250V","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20203 SICURY P17\/11 socket outlet is a 2P+E, 16 A, 250 V flush-mounted outlet insert for Italian standard P17\/11 AC installations. It is a one-module device with a compact 22.3 x 49 x 34.5 mm body, which makes it a straightforward fit where panel space is limited and the installation uses the Eikon modular format.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matte finish, and wiring is made through screw terminals. SICURY contact protection adds an internal shutter that closes when the plug is removed. With an IP20 rating, this outlet belongs in a protected interior location such as a cabin panel, galley bulkhead, or chart table installation, not in open deck, cockpit, or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P+E Italian type Bipasso outlet in P17\/11 format\u003c\/li\u003e\n\u003cli\u003eRated 16 A at 250 V, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003eOne-module insert for flush-mounted Eikon installations\u003c\/li\u003e\n\u003cli\u003eScrew terminal connection for fixed wiring\u003c\/li\u003e\n\u003cli\u003eSICURY contact protection with shuttered outlet openings\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matte finish\u003c\/li\u003e\n\u003cli\u003eIP20 protection for dry interior mounting points\u003c\/li\u003e\n\u003cli\u003eFront label space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in four color configurations within the same Eikon 20203 family.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical format stays the same: 2P+E Italian standard P17\/11, 16 A, 250 V, 50 to 60 Hz, one module, flush mounting, screw terminals, halogen-free thermoplastic construction, IP20 protection, and 22.3 x 49 x 34.5 mm dimensions. The changes between variants are finish and, in the red version, application marking.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20203.B: Color White. This version keeps the outlet in a light Eikon palette for interiors that use white plates and trim.\u003c\/li\u003e\n\u003cli\u003eVM20203.N: Color Silver. This version uses a silver finish with a lacquered matte surface that matches Eikon Next silver hardware.\u003c\/li\u003e\n\u003cli\u003eVM20203.R: Color Red. This version is marked for dedicated supply lines, which helps separate a specific AC circuit from general-purpose outlets.\u003c\/li\u003e\n\u003cli\u003eVM20203: Color Grey. This version keeps the outlet in the darker Eikon palette and gives a lower-contrast look on dark panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and placement\u003c\/h6\u003e\u003cp\u003eCheck both the plug standard and the modular system before ordering. This insert is for Italian standard P17\/11 outlets and uses the Eikon one-module format, so it suits refits where the boat already has that layout in place.\u003c\/p\u003e\u003cp\u003eIP20 means it should stay in a protected interior space. It works for cabin, galley, chart table, and other enclosed AC points, but it is not the right choice for open cockpit panels, deck lockers, or other areas that see spray or washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550367351030,"sku":"APL182765-V7","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550367383798,"sku":"APL182765-V6","price":34.5,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550367416566,"sku":"APL182765-V5","price":32.5,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":51550367449334,"sku":"APL182765-V9","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363536_apl182765_jpeg.jpg?v=1787792220"},{"product_id":"apl946800","title":"Vimar 3-Module Flush Mounting Box, For Masonry Walls, 20\/25 mm Knockouts, 96 x 59 x 49.8 mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar 3-module flush mounting box is a rectangular box for masonry walls with space for three device inserts in a 96 x 59 mm format. It has a 50 mm inner depth, up to 49.8 mm installation depth, and 12 inlets with break-out openings sized for 20\/25 mm conduit.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free plastic and the box can be coupled with matching accessories when several boxes need to be installed in line. It also includes a patented rack for a dividing screen and zinc-plated support screw lugs that help keep the threads clear during installation. This is the concealed box behind the finished device, not a standalone exposed enclosure.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module rectangular flush box for masonry wall installations\u003c\/li\u003e\n\u003cli\u003e96 x 59 mm body with 50 mm inner depth\u003c\/li\u003e\n\u003cli\u003e12 inlets with break-out openings for 20\/25 mm conduit\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic housing\u003c\/li\u003e\n\u003cli\u003eCouplable format for multi-box runs with matching joints\u003c\/li\u003e\n\u003cli\u003ePatented rack for fitting a dividing screen\u003c\/li\u003e\n\u003cli\u003eZinc-plated support screw lugs to help avoid thread clogging during fitting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two configurations of the same 3-module flush mounting box for masonry walls.\u003c\/p\u003e\u003cp\u003eThe differences between the variants are the glow-wire rating and the box color. The masonry wall format, 3-module layout, and general installation concept remain the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMV71303: Glow Wire 650 °C, light blue. This version uses the light blue housing commonly specified for standard masonry installations.\u003c\/li\u003e\n\u003cli\u003eVMV71303.AU: Glow Wire 960 °C, black. This version keeps the same box format with a black housing and a higher glow-wire rating.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for flush mounting in masonry walls and for switchgear that mounts by screwing into place. It is not a hollow-wall or plasterboard box, so it suits solid-wall installations where conduit entry, internal wiring space, and a clean flush finish matter more than surface access.\u003c\/p\u003e\u003cp\u003eIt also works where separate internal compartments are needed, since a matching dividing screen can be fixed to the internal rack. Anti-mortar covers and coupling joints are available for cleaner rough-in work and for creating multi-box combinations.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe conduit entries are formed by break-out openings, including rear entry, which makes it easier to route wiring into the box from different directions during first fix. The box itself is rated IP00, so the final protection level depends on the complete assembly installed over it.\u003c\/p\u003e\u003cp\u003eThis is a practical choice for built-in electrical points in masonry utility spaces, marina service buildings, workshop walls, and other fixed installations where a Vimar 3-module flush box is required. It is less suited to lightweight interior panels, where a hollow-wall box would be the better fit.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Glow Wire 650\/Light Blue","offer_id":51550369317110,"sku":"APL946800-7","price":0.8,"currency_code":"USD","in_stock":true},{"title":"Glow Wire 960\/Black","offer_id":51550369349878,"sku":"APL946800-1","price":2.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827933_apl946800.jpg?v=1787792293"},{"product_id":"apl149675","title":"Vimar Eikon Classic 3-Module Cover Plate","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20653 Classic cover plate is a 3-module front plate for the Eikon wiring range, used to finish switches, sockets, and similar modular control points with a square, flush-mounted look. Across the validated versions in this family, it can be installed horizontally or vertically, and the face size is around 119.8 x 84.8 mm on metal and wood versions, while Reflex versions are about 120 x 85 mm with a 10 mm depth.\u003c\/p\u003e\u003cp\u003eThis listing covers multiple finishes, and the base material changes with the version. Metal, Reflex technopolymer or acrylic, and Italian walnut variants are all present in the 20653 range, so the exact finish code matters when you are replacing an existing plate or keeping a refit consistent across the cabin.\u003c\/p\u003e\u003cp\u003eOn board, this cover plate fits best in protected interior spaces such as cabins, saloons, galleys, and other dry accommodation areas. The front protection is IP00, so it is not the right choice for exposed helm positions, open cockpits, or washdown zones.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e3-module Eikon Classic cover plate for modular switch and socket layouts\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan be mounted horizontally or vertically\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMade for flush-mounted installations\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFinish range in this listing includes satin, matte, chrome-effect, Reflex, and wood options\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eValidated versions in this family are halogen-free\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaterial depends on finish, with metal, technopolymer or acrylic, and solid wood versions in the range\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExternal dimensions vary slightly by version, with metal and wood examples at about 119.8 x 84.8 x 9 mm and Reflex examples at about 120 x 85 x 10 mm\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis family is offered in a wide spread of finishes, including Satin Gold, White Chrome, Ice White, Arctic White, Black Chrome, Matte Silver, Matte Titanium, Satin Nickel, Reflex Anthracite, Matte Anthracite, Silver, Antique White, Brushed Silver, Italian Walnut, Graphite, and Anthracite.\u003c\/p\u003e\u003cp\u003eThe main difference across the range is the finish, but the underlying material also changes with some versions. The validated range includes painted or plated metal options, Reflex technopolymer or acrylic options, and an Italian Walnut solid wood option. The format stays within the Eikon Classic 3-module family, though outside dimensions and depth can vary slightly by version.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the visible cover plate only, so it needs to match the correct 3-module Eikon installation behind it. For a replacement job, check the existing series, the 3-module opening, the mounting orientation, and the finish code before ordering, especially when you are matching other cabins, bulkheads, or switching points on board.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Matte Titanium","offer_id":51550378459382,"sku":"APL149675-V4","price":49.52,"currency_code":"USD","in_stock":false},{"title":"Antique White","offer_id":51550378492150,"sku":"APL149675-V8","price":42.5,"currency_code":"USD","in_stock":false},{"title":"Satin Nickel","offer_id":51550378524918,"sku":"APL149675-V5","price":55.0,"currency_code":"USD","in_stock":false},{"title":"Matte Anthracite","offer_id":51550378557686,"sku":"APL149675-V6","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Reflex Anthracite","offer_id":51550378590454,"sku":"APL149675-V51","price":15.25,"currency_code":"USD","in_stock":true},{"title":"Black Chrome","offer_id":51550378623222,"sku":"APL149675-V2","price":57.18,"currency_code":"USD","in_stock":true},{"title":"Italian Walnut","offer_id":51550378655990,"sku":"APL149675-V10","price":127.87,"currency_code":"USD","in_stock":false},{"title":"Graphite","offer_id":51550378688758,"sku":"APL149675-V11","price":12.9,"currency_code":"USD","in_stock":true},{"title":"Ice White","offer_id":51550378721526,"sku":"APL149675-V09","price":13.5,"currency_code":"USD","in_stock":false},{"title":"Arctic White","offer_id":51550378754294,"sku":"APL149675-V1","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Brushed Silver","offer_id":51550378787062,"sku":"APL149675-V9","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Matte Silver","offer_id":51550378819830,"sku":"APL149675-V3","price":47.56,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550378852598,"sku":"APL149675-V7","price":41.5,"currency_code":"USD","in_stock":true},{"title":"White Chrome","offer_id":51550378885366,"sku":"APL149675-V0","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1313704_apl149675.webp?v=1787792724"},{"product_id":"apl399782","title":"Vimar Eikon SICURY French Standard Socket Outlet, 2P+E 16A 250V, 2-Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20212 is a French-standard 2P+E SICURY socket outlet rated 16 A at 250 V~ in a 2-module format for flush mounting. It is a single outlet for 50-60 Hz AC systems with enhanced contact protection and an IP20 rating, so it belongs in dry interior areas on board.\u003c\/p\u003e\u003cp\u003eOn a boat this is typically used where you want a familiar French plug point on a 230 V distribution fed from shore power, an inverter, or an onboard generator. It works well at a nav station, in a cabin, or in the saloon, where the outlet is protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe body is thermoplastic with a matt surface finish and it is halogen free. Allow for the device footprint behind the plate: 44.8 mm wide, 49.0 mm high, and 35.9 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFrench 2P+E socket format for Type E plugs, 1 outlet in a 2-module Eikon device size.\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 16 A, 250 V~ AC, 50-60 Hz.\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection to reduce accidental contact with live parts.\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation for clean integration in interior panels and bulkheads.\u003c\/li\u003e\n\u003cli\u003eIP20 rating, intended for protected locations away from direct water spray.\u003c\/li\u003e\n\u003cli\u003eThermoplastic body, halogen free, with a matt finish.\u003c\/li\u003e\n\u003cli\u003eLabel space on the front for circuit identification.\u003c\/li\u003e\n\u003cli\u003eOffered with either screwed terminals or push-in clamp (screwless) terminals depending on variant.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outlet is offered in multiple configurations to match the look of your interior and the way you prefer to wire the circuit.\u003c\/p\u003e\u003cp\u003eAcross the range, the visible color varies (Grey, White, Silver), along with the front style (No Cover, With Cover, or Flat Design). Installation also varies between versions that use screwed terminals and versions that use push-in clamp (screwless) terminals.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a flush-mounted, modular device, so it should be fitted into a suitable recessed box or mounting solution and aligned to the rest of the Eikon modular layout. Before wiring, isolate the AC supply at the main breaker and verify the circuit is de-energized.\u003c\/p\u003e\u003cp\u003eAfter installation, check polarity and that the protective earth is continuous back to the vessel system. In marine AC systems, this outlet should be protected by an RCD or equivalent residual-current device upstream, and the circuit should be sized appropriately for a 16 A receptacle.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis product is for 250 V~ AC distribution, not for 12 V or 24 V DC. It is meant for French-standard plugs, so confirm your onboard appliances and adapters match the socket format you are installing.\u003c\/p\u003e\u003cp\u003eBecause it is a 2-module Eikon device, confirm your mounting layout, frames, and plates are set up for a 2-module outlet position, and that you have at least 35.9 mm of clear depth behind the finished surface for the device body and cable bend radius.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for owners refitting cabins, saloons, and nav areas where you want a French receptacle in a modular Eikon layout and the outlet sits in a protected, dry location. For galleys, heads, or anywhere with frequent moisture, place it where it is sheltered and consider a covered front style for an extra physical barrier at the face.\u003c\/p\u003e\u003cp\u003eAs with any onboard AC outlet, inspect periodically for heat discoloration, loose wiring, and any signs of corrosion from airborne salt, especially if the boat sees heavy ventilation or doors are often left open at the dock.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"With Cover \/ Grey \/ Screws","offer_id":51550390616310,"sku":"APL399782-V3","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ Silver \/ Screwless","offer_id":51550390649078,"sku":"APL399782-V12","price":36.75,"currency_code":"USD","in_stock":false},{"title":"No Cover \/ Silver \/ Screws","offer_id":51550390681846,"sku":"APL399782-V7","price":31.71,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ Silver \/ Screws","offer_id":51550390714614,"sku":"APL399782-V2","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ White \/ Screwless","offer_id":51550390747382,"sku":"APL399782-V11","price":33.75,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ Grey \/ Screwless","offer_id":51550390780150,"sku":"APL399782-V1","price":36.0,"currency_code":"USD","in_stock":true},{"title":"With Cover \/ White \/ Screwless","offer_id":51550390812918,"sku":"APL399782-V75","price":36.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Grey \/ Screwless","offer_id":51550390845686,"sku":"APL399782-V6","price":28.0,"currency_code":"USD","in_stock":true},{"title":"With Cover \/ Silver \/ Screwless","offer_id":51550390878454,"sku":"APL399782-V8","price":37.75,"currency_code":"USD","in_stock":true},{"title":"Flat Design \/ Grey \/ Screwless","offer_id":51550390911222,"sku":"APL399782-V10","price":33.75,"currency_code":"USD","in_stock":false},{"title":"With Cover \/ White \/ Screws","offer_id":51550390943990,"sku":"APL399782-V9","price":36.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ White \/ Screwless","offer_id":51550390976758,"sku":"APL399782-V29","price":28.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Silver \/ Screwless","offer_id":51550391009526,"sku":"APL399782-V0","price":30.5,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ Grey \/ Screws","offer_id":51550391042294,"sku":"APL399782-V4","price":28.0,"currency_code":"USD","in_stock":true},{"title":"No Cover \/ White \/ Screws","offer_id":51550391075062,"sku":"APL399782-V5","price":29.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312308_apl399782.jpg?v=1787793097"},{"product_id":"apl946532","title":"Vimar Idea\/8000 IP40 Surface Enclosure, 2 Modules, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar IP40 surface mounting box is a 2-module enclosure for Idea modules or 2 8000 special modules, with versions in ivory or grey. It is made from plastic, uses full insulating materials, and includes 2 adaptors 08491 for 8000 standard modules.\u003c\/p\u003e\u003cp\u003eOn a boat, this type of enclosure works well where you need a clean surface-mounted switch point instead of cutting a recess into a bulkhead or panel. IP40 makes it a better fit for interior areas that stay protected, such as cabins, nav stations, console interiors, and service spaces behind doors or panels, rather than exposed deck locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module surface enclosure for Vimar Idea modules or 2 Vimar 8000 special modules\u003c\/li\u003e\n\u003cli\u003eSupplied with 2 adaptors 08491 for installations using 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eIP40 enclosure rating for interior installations where direct spray and washdown are not expected\u003c\/li\u003e\n\u003cli\u003ePlastic housing with full insulating materials\u003c\/li\u003e\n\u003cli\u003eCompact enclosure format, approximately 68 x 93 x 56 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in more than one colour configuration.\u003c\/p\u003e\u003cp\u003eThe listed versions differ by colour. The enclosure format stays at 2 modules with IP40 protection across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM13023.A, Color Ivory. This version suits lighter switch trims and interiors where a softer finish blends in more easily.\u003c\/li\u003e\n\u003cli\u003eVM13023, Color Grey. This version has a more neutral technical look that sits well on darker panels and utility spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, check the module family already installed on the vessel. This box accepts 2 Idea modules directly, or 2 8000 special modules. Where the installation uses 8000 standard modules, the supplied 08491 adaptors are part of the fit.\u003c\/p\u003e\u003cp\u003eThat makes it useful for refit work as well as small repairs, especially on boats where older switch locations may already use Vimar components from the Idea or 8000 range.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eBecause it is a surface enclosure, it is useful where there is not enough depth for a flush box behind the panel. That can simplify work on finished joinery, fiberglass liners, and retrofit panels where access behind the mounting surface is limited.\u003c\/p\u003e\u003cp\u003eThis is a sensible choice for owners, electricians, and yards who need a tidy 2-module box in a protected onboard location and want to stay within the Vimar Idea or 8000 ecosystem.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Ivory","offer_id":51550392746230,"sku":"APL946532-V5","price":5.0,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550392778998,"sku":"APL946532-V6","price":5.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364043_apl946532_jpeg.jpg?v=1787793163"},{"product_id":"apl289276","title":"Vimar Plana 2P+E French SICURY Socket Outlet, 16A, 250V, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2P+E French SICURY outlet range for flush-mounted AC installations that use the French socket format. It is rated 16 A at 250 V, works at 50 to 60 Hz, and uses a 2-module layout, which makes it easy to match with other Plana devices in a finished interior.\u003c\/p\u003e\u003cp\u003eThe body is made from halogen-free thermoplastic with a glossy surface, and the device measures 44.8 x 49.0 x 35.9 mm. Enhanced contact protection is built in, and the IP20 rating makes this a fit for protected indoor spaces rather than exposed areas on deck.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this outlet suits cabins, saloons, galleys, and other dry accommodation spaces where a French standard receptacle is needed and the installation is already based around Vimar Plana components.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFrench standard 2P+E outlet rated 16 A, 250 V AC, 50 to 60 Hz\u003c\/li\u003e\n\u003cli\u003e2-module Plana format for flush-mounted installations\u003c\/li\u003e\n\u003cli\u003eSICURY enhanced contact protection built into the outlet\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with a glossy finish\u003c\/li\u003e\n\u003cli\u003eCompact 44.8 x 49.0 x 35.9 mm size for panel and box clearance checks\u003c\/li\u003e\n\u003cli\u003eRange includes white or silver finish, versions with or without cover, and screwed or screwless terminal options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eAcross the listed configurations, the differences are finish, front cover, and terminal style. The range is available in white or silver, with or without a cover, and with either screwed terminals or screwless push-in clamp terminals.\u003c\/p\u003e\u003cp\u003eOne white version adds antibacterial treatment. Across the range, the core outlet format stays the same: 2P+E French standard, 16 A, 250 V, 50 to 60 Hz, flush-mounted, and built as a 2-module device.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis outlet is part of the Vimar Plana device family, so it is intended for Plana modular installations and a 2-module opening. The compact body helps when checking available depth behind cabin liners, furniture panels, or interior bulkheads.\u003c\/p\u003e\u003cp\u003eBecause protection is IP20, it belongs in dry interior locations. It is not intended for cockpits, exterior helm stations, wet lockers, or other places that see spray, washdowns, or direct weather exposure.\u003c\/p\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eScrewed-terminal versions use conventional conductor termination, while the screwless versions use push-in clamp terminals. Versions with cover add a protective front flap over the socket face when the outlet is not in use.\u003c\/p\u003e\u003cp\u003eThis range is a good match for boats already laid out with French standard AC outlets and for refit work where the goal is to keep the same Vimar Plana look across switches, sockets, and other interior electrical devices.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White \/ Screwless \/ No Cover","offer_id":51550396186870,"sku":"APL289276-8","price":15.75,"currency_code":"USD","in_stock":false},{"title":"White \/ Screwless \/ With Cover","offer_id":51550396219638,"sku":"APL289276-5","price":20.0,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screws \/ No Cover","offer_id":51550396252406,"sku":"APL289276-0","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White\/Antibacterial \/ Screws \/ No Cover","offer_id":51550396285174,"sku":"APL289276-1","price":17.25,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screws \/ With Cover","offer_id":51550396317942,"sku":"APL289276-7","price":24.75,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screwless \/ With Cover","offer_id":51550396350710,"sku":"APL289276-9","price":24.75,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Screwless \/ No Cover","offer_id":51550396383478,"sku":"APL289276-3","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Screws \/ No Cover","offer_id":51550396416246,"sku":"APL289276-4","price":16.37,"currency_code":"USD","in_stock":false},{"title":"White \/ Screws \/ With Cover","offer_id":51550396449014,"sku":"APL289276-2","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828827_apl289276.jpg?v=1787793221"},{"product_id":"apl589135","title":"Vimar ARKÉ F Type Female Socket Connector, 2400 MHz, IEC 60169-24","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar ARKÉ Series is a range of F-type female socket connectors used to terminate coaxial TV and satellite lines in a fitted wall plate or panel. Each version uses an IEC 60169-24 F-type female connection and handles frequencies up to 2400 MHz.\u003c\/p\u003e\u003cp\u003eThis is a single-outlet end socket with support for remote power supply through the coax line. The insert body measures 22.2 x 49 x 30 mm and mounts by snap engagement, which helps keep the installation neat inside a compatible ARKÉ layout.\u003c\/p\u003e\u003cp\u003eFor marine interiors, this type of insert fits best in protected spaces such as cabins, saloons, and helm consoles where a coax feed needs a clean finished outlet instead of a loose cable end. It is a practical match for onboard TV and satellite distribution where an F-type male connector is already part of the wiring plan.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIEC 60169-24 F-type female coaxial connection for TV and satellite signal points\u003c\/li\u003e\n\u003cli\u003eRated for frequencies up to 2400 MHz\u003c\/li\u003e\n\u003cli\u003eSingle-outlet end socket format\u003c\/li\u003e\n\u003cli\u003eSuitable for remote power supply through the coax line\u003c\/li\u003e\n\u003cli\u003eSnap-mount engagement for quick fitting into the ARKÉ device system\u003c\/li\u003e\n\u003cli\u003e22.2 x 49 x 30 mm insert size across the listed finish options\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple finish configurations within the same connector format.\u003c\/p\u003e\u003cp\u003eAcross the listed versions, the connector type, frequency limit, single-outlet layout, remote power compatibility, snap-mount format, and body size remain the same. What changes between variants is the visible finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19318 - Grey, RAL 7015. This version suits installations built around darker grey ARKÉ trim and keeps the outlet visually discreet on bulkheads and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM19318.M - Metal, aluminium tone, RAL 9007. This version changes the visible look to a metallic finish while keeping the same connector layout and installation format.\u003c\/li\u003e\n\u003cli\u003eVM19318.B - White, RAL 9016. This version works well where the surrounding trim and panel hardware are finished in white and a lighter face is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis insert is part of the ARKÉ range, so it should be matched with the correct system components for the final installation. The coax line connects through an F-type male connector, which should be checked before ordering if the boat is being refitted from another connector style.\u003c\/p\u003e\u003cp\u003eBecause this is a flush device insert rather than a standalone deck fitting, it makes the most sense where the coax run is already routed behind a finished panel. That is usually the case in entertainment panels, cabin joinery, and helm stations with built-in electronics.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis socket is intended for coaxial signal runs that use the F-type format and is commonly used for TV and satellite distribution. It is a sensible choice for boats that need a tidy signal outlet at the point of use without changing the appearance of the surrounding electrical accessories.\u003c\/p\u003e\u003cp\u003eIt is especially relevant for refit work where matching the finish of the interior switches and sockets matters, but the signal side still needs a proper high-frequency coax connection.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550397989110,"sku":"APL589135-8","price":16.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550398021878,"sku":"APL589135-5","price":16.0,"currency_code":"USD","in_stock":false},{"title":"Metal","offer_id":51550398054646,"sku":"APL589135-0","price":17.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828204_apl589135.jpg?v=1787793298"},{"product_id":"apl542577","title":"Vimar 8000 Series Cord-Operated Push Button, 1P NO, 10A 250V, 1.5 m Cord, IP40, White","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08270 is a 1-pole, normally open cord-operated momentary push button rated 10 A at 250 V~ for flush-mounted installations. It gives you a quick pull-to-activate contact, with a 1.5 m cord so the control point can be reached from a berth, locker opening, heads area, or any spot where a standard wall button is awkward.\u003c\/p\u003e\u003cp\u003eThis is an IP40 device, so it belongs in dry, protected interiors rather than exposed cockpits or washdown zones. On board it is typically used as a momentary control input for a relay, controller, bell, or signaling circuit where you want the circuit to close only while the cord is pulled.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free thermoplastic with a matt white finish (RAL 9001) and includes a label area, which helps keep panels and service points readable when multiple controls are grouped together.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMomentary 1P\/NO contact (circuit closes only while operated)\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A, 250 V~\u003c\/li\u003e\n\u003cli\u003e1.5 m operating cord for remote, easy-to-reach activation\u003c\/li\u003e\n\u003cli\u003eFlush-mounted device with snap (engage) fastening\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for sheltered interior locations\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic body with matt white finish (RAL 9001)\u003c\/li\u003e\n\u003cli\u003eOverall size: 22.00 mm wide, 50.10 mm high, 35.00 mm deep\u003c\/li\u003e\n\u003cli\u003eLabel space on the front for clear circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan for a flush-mount position with enough clearance behind the surface for the 35.00 mm device depth and for bending the conductors without stress. If you are mounting into joinery or a thin liner, make sure the backing structure supports the module so it does not flex when the cord is pulled.\u003c\/p\u003e\u003cp\u003eRoute the cord so it moves freely and does not chafe on edges or snag on gear. On a boat, that usually means keeping it away from hatch corners, locker lids, and moving seat bases, and leaving a clean path that stays predictable underway.\u003c\/p\u003e\u003ch6\u003eElectrical and onboard use\u003c\/h6\u003e\u003cp\u003eWire it as a normally open momentary contact in the control circuit you are switching. For DC onboard systems, it is often used to trigger a relay or control input rather than switching heavy DC loads directly, which helps keep arcing and heat out of the switch location.\u003c\/p\u003e\u003cp\u003eConfirm the circuit load and protection match the device rating, and use marine-appropriate conductors, terminations, and strain relief for vibration. If the control is near damp spaces, place it where it stays dry and where condensation or drips cannot run into the module.\u003c\/p\u003e\u003ch6\u003eWhere it works best on board\u003c\/h6\u003e\u003cp\u003eThis style of pull-cord momentary button makes sense in cabins, heads compartments, closets, and under-counter spaces where you want a simple, reachable call or trigger point. It is also useful at service access points where you want a quick, labeled momentary control without adding a bulky panel switch.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the front surface with a lightly damp cloth and avoid harsh solvents that can haze plastics. Periodically check that the cord runs smoothly and that the mounting remains tight after seasons of vibration and temperature cycling.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550399201526,"sku":"APL542577","price":27.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826840_apl-b7x-qgc-uhr.jpg?v=1787793394"},{"product_id":"apl150004","title":"Vimar LED Driver, 12\/24V DC, Constant Voltage, 24W, IP20, Dimmable with MASTER Dimmers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThis Vimar LED driver is a constant-voltage power supply for 12V and 24V LED strip modules, with versions for either 230V 50Hz or 120V 60Hz input. It works with MASTER dimmers and delivers up to 1,700 mA with output power around 24 W, which makes it suitable for compact onboard strip-light circuits where smooth dimming and a steady low-voltage output matter.\u003c\/p\u003e\u003cp\u003eThe housing is IP20 with Protection Class II, so it belongs in a dry interior mounting position such as behind a panel, inside joinery, or in a protected locker rather than on deck or in any washdown area. This unit is for constant-voltage LED strip modules, not for 230V LED lamps, constant-current loads, or 0-10V and 1-10V ballast systems.\u003c\/p\u003e\u003cp\u003eFor boats, it makes the most sense where the lighting run is fed from the vessel's AC side, whether that comes from shore power, a generator, or an inverter. The long, low-profile body measures 218 x 60.5 x 36.6 mm, which helps when space is limited behind interior panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConstant-voltage output for 12V or 24V LED strip modules\u003c\/li\u003e\n\u003cli\u003eVersions available for 230V 50Hz or 120V 60Hz AC input\u003c\/li\u003e\n\u003cli\u003eOutput current up to 1,700 mA with output power around 24 W\u003c\/li\u003e\n\u003cli\u003eCompatible with MASTER dimmers for dimmable lighting circuits\u003c\/li\u003e\n\u003cli\u003eIP20 plastic housing with Protection Class II for dry interior installation\u003c\/li\u003e\n\u003cli\u003e218 x 60.5 x 36.6 mm form factor for tight service spaces behind panels or cabinetry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two input-power configurations for different AC systems on board.\u003c\/p\u003e\u003cp\u003eAcross both versions, the output side remains the same with 12V to 24V constant-voltage operation, output current up to 1,700 mA, output power around 24 W, IP20 protection, Protection Class II, and the same overall dimensions. The change between variants is the primary input voltage and frequency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM01874: 230V, 50Hz input. This version suits vessels and dockside electrical systems built around 230V AC service.\u003c\/li\u003e\n\u003cli\u003eVM01874.120: 120V, 60Hz input. This version matches boats and shore-power installations that use 120V AC service at 60Hz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore fitting the driver, match the input version to the boat's AC supply and confirm that the LED strip modules are designed for constant-voltage operation on a 12V or 24V DC lighting circuit. Because the enclosure is IP20, mount it where it stays dry and where routine access is still possible for service work.\u003c\/p\u003e\u003cp\u003eIts slim length can be useful behind interior liners, inside lockers, or in cabinet voids, but it still needs a clean mounting surface and sensible cable routing. On refit jobs, it is worth checking that the existing dimming control is a compatible MASTER dimmer before treating it as a direct swap.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis driver is a good match for interior strip-light installations in cabins, companionways, saloons, and similar protected spaces where AC power is already available on board. It is less suitable for open deck lighting, exposed lockers, or circuits that depend on direct DC input on the primary side.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"120V 60Hz","offer_id":51550399332598,"sku":"APL150004-V2","price":199.0,"currency_code":"USD","in_stock":false},{"title":"230V 50Hz","offer_id":51550399365366,"sku":"APL150004-V1","price":206.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1267845_apl150004.jpg?v=1787793371"},{"product_id":"apl854976","title":"Vimar Eikon Neutral Double Indicator Unit, 250V, IP40, 1-Module, Flush-Mount, Without Signalling Unit","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon neutral double indicator unit is a 1-module flush-mount insert for two signalling units, with neutral diffusers and a 250 V nominal rating. It is supplied without the signalling unit, so it is the front indicator body rather than a complete illuminated assembly.\u003c\/p\u003e\u003cp\u003eThis range fits Eikon modular switching layouts where a compact visual indicator is needed on a panel, bulkhead, or interior control point. The housing is thermoplastic, halogen-free, and finished in matt plastic, with an IP40 rating and snap-in fastening for straightforward integration into the matching support and cover system.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in protected interior locations such as cabin switch panels, technical spaces, or enclosed helm areas where you want a clean indicator position within a Vimar Eikon installation. Because it is IP40, it is better suited to dry or lightly protected spaces rather than exposed deck or washdown areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDouble indicator unit format for 2 signalling units with neutral diffusers\u003c\/li\u003e\n\u003cli\u003e1-module Eikon device body for compact use in modular switch panels\u003c\/li\u003e\n\u003cli\u003e250 V nominal rating for systems built around this voltage class\u003c\/li\u003e\n\u003cli\u003eFlush-mounted design with snap fastening for a tidy panel finish\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eSupplied without signalling unit, which matters when matching the insert to the rest of the switching assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in three finish options within the same Eikon neutral double indicator unit format.\u003c\/p\u003e\u003cp\u003eThe variant change is the visible finish and colour. The functional layout remains the same across the range where confirmed, including the 1-module body, double indicator format for 2 signalling units, flush mounting, IP40 protection, and 250 V nominal rating.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20388.B, white. This version suits switch panels and interior trim where a lighter finish is already used across the cabin or service area.\u003c\/li\u003e\n\u003cli\u003eVM20388.N, silver. This finish gives the indicator a more metallic look and works well where the surrounding Eikon hardware uses the Next silver style.\u003c\/li\u003e\n\u003cli\u003eVM20388, grey. This option keeps the same function with a darker neutral appearance that blends more easily into grey switch surrounds and technical panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis insert is made for flush mounting and uses snap engagement, so fit depends on using the correct Eikon support and finishing parts around it. It occupies one module position and is intended for installations already built around the Vimar modular switching system.\u003c\/p\u003e\u003cp\u003eBecause the light source is not included, the assembly should be planned as part of the full switch and indicator setup rather than as a stand-alone part. That is the main point to check before ordering, especially when replacing a single insert in an existing panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refit and new-build interiors that use Vimar switching in accommodation spaces, enclosed helm stations, or utility areas where panel appearance matters as much as fit. It is especially useful when you need a double indicator position without giving up extra module space.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550399496438,"sku":"APL854976-V0","price":28.33,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550399529206,"sku":"APL854976-V8","price":27.25,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550399561974,"sku":"APL854976-V9","price":32.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363810_apl854976_jpeg.jpg?v=1787793415"},{"product_id":"apl678969","title":"Vimar Rectangular Flush Mounting Box, 6-7 Module, For Masonry Walls, 174 x 59 mm, 50 mm Internal Depth, Black","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM71306.AU is a flush-mount box with a rectangular 6 to 7-module format, finished in black, used behind device supports and cover plates for a clean recessed installation. The body measures 174 mm wide by 59 mm tall and gives about 50 mm of internal depth for wiring.\u003c\/p\u003e\u003cp\u003eIt has nine break-out inlets with knockouts sized for 20 mm or 25 mm conduit, so you can route cables neatly through a bulkhead or cabinet side and keep strain off the terminals. Switching equipment mounts by screws, and the box is supplied without screws and without a cover.\u003c\/p\u003e\u003cp\u003eThe housing is plastic that is halogen-free and tested to a 960 C glow-wire rating. The box carries an IP00 rating, so it is not a watertight enclosure and belongs in protected interior locations on board, behind the finished plate.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUnified 6 to 7-module recessed box format for wall-plate installations\u003c\/li\u003e\n\u003cli\u003e174 mm x 59 mm body size with about 50 mm internal depth for wiring space\u003c\/li\u003e\n\u003cli\u003eNine break-out cable entries with knockouts for 20 mm or 25 mm conduit\u003c\/li\u003e\n\u003cli\u003eRear entry option for bringing wiring straight in from behind the panel\u003c\/li\u003e\n\u003cli\u003eProvision for a dividing screen via the internal rack (divider sold separately)\u003c\/li\u003e\n\u003cli\u003eConnectable box body for building multi-gang runs with coupling accessories\u003c\/li\u003e\n\u003cli\u003eSupport screw lugs have zinc plating to help keep threads clear during installation\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic with a 960 C glow-wire test rating; IP00 enclosure rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for installations based on the Italian 6 to 7-module standard. Confirm your device support and cover plate are sized for a 6M or 7M opening and that your mounting surface has enough depth behind it to accommodate the box and cable bend radius.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLay out cable routing before setting the box, then open only the knockouts you need to keep the fit tight around conduit or looms. When wiring comes from behind, using the rear entry helps reduce crowding at the sides. Since devices mount by screws, make sure the correct screws are available for the support you are installing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of recessed back box is a good match for cabins, enclosed consoles, and interior joinery where switches and outlets need a flush finish and protection from bumps. Keep it out of areas exposed to washdowns or spray, and rely on the fitted device and cover plate for the finished front surface.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550407065846,"sku":"APL678969","price":19.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0368804_apl678969_jpeg.jpg?v=1787793720"},{"product_id":"apl324826","title":"Vimar By-me Plus PLANA 1-Module Relay Actuator, 6A, 120-230V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series 1 Module Relay Actuator is a flush-mounted By-me Plus bus actuator with a 6 A change-over relay output for 120-230 V circuits. It takes one module position in the Plana range, includes LED indication, and comes with bus connection.\u003c\/p\u003e\u003cp\u003eOn board, this type of module fits best behind interior control points where space is limited and the installation already uses the Vimar By-me Plus system. Its IP40 rating makes it more appropriate for cabins, saloons, enclosed helm areas, and other sheltered spaces than for open deck or washdown locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 A change-over relay output for 120-230 V circuits within the device rating\u003c\/li\u003e\n\u003cli\u003eFlush-mounted format that takes one module position in a Plana installation\u003c\/li\u003e\n\u003cli\u003eWorks on the Vimar By-me Plus bus and includes bus connection\u003c\/li\u003e\n\u003cli\u003eLED indication on the module for status visibility at the panel\u003c\/li\u003e\n\u003cli\u003eSuitable for C-loads with one switching contact\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two finish options within the same relay actuator format.\u003c\/p\u003e\u003cp\u003eThe finish changes between variants. The electrical rating, mounting method, module width, bus connection, LED indication, C-load suitability, and IP40 protection remain the same across both versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14534: White finish. This version keeps a white look that matches white Plana switch positions and interior panels.\u003c\/li\u003e\n\u003cli\u003eVM14534.SL: Silver finish. This version keeps the same actuator specification with a silver front for installations that use silver Plana trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis actuator is made for flush mounting and takes one module position, which helps when panel space is tight. It is a bus device rather than a stand-alone wall switch, so it belongs in a Vimar By-me Plus installation with the right programming and system layout.\u003c\/p\u003e\u003cp\u003eThere is no local hand operation on the module. That matters in service areas or technical spaces where direct manual override at the device may be part of the design, because control is expected to come through the bus system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis unit suits boats that already use Vimar Plana controls and need a compact relay point for an AC circuit inside the accommodation or other enclosed areas. It is a better fit for interior joinery, protected helm panels, or service spaces than for exposed mounting points.\u003c\/p\u003e\u003cp\u003eDifferent phases are not connectable on this actuator, so that point should be checked early in a refit or new installation when matching the device to the boat's distribution layout and the function assigned in the control system.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550410735862,"sku":"APL324826-1","price":153.86,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550410768630,"sku":"APL324826-8","price":156.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827772_apl324826.jpg?v=1787793959"},{"product_id":"apl577989","title":"Vimar 8000 Series 2-Module Cover Plate, 60 mm Round Mounting Box, Screw Mounting, Anodized Aluminium","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 8000 Series is a 2-module cover plate for ø 60 mm round mounting boxes, used to finish a Vimar 8000 wiring device neatly on a bulkhead or interior panel.\u003c\/p\u003e\u003cp\u003eIt mounts with screws and can be oriented horizontally or vertically. The plate is anodized aluminium with a matt finish and measures 79.50 mm x 79.50 mm with a 6.00 mm depth.\u003c\/p\u003e\u003cp\u003eProtection rating is IP00, so it belongs in dry, sheltered locations, or behind a door or cover if the area sees spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module cover plate for ø 60 mm round mounting boxes when paired with Vimar mounting frame 08502\u003c\/li\u003e\n\u003cli\u003eScrew fixing for a secure fit on panels that see vibration underway\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical mounting to suit the box orientation and layout\u003c\/li\u003e\n\u003cli\u003eAnodized aluminium with a matt finish for a clean, low-glare look\u003c\/li\u003e\n\u003cli\u003eOverall size: 79.50 mm x 79.50 mm; depth: 6.00 mm\u003c\/li\u003e\n\u003cli\u003eIP00 rating (not sealed)\u003c\/li\u003e\n\u003cli\u003eHalogen-free construction\u003c\/li\u003e\n\u003cli\u003eLabel space for circuit identification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eOffered in two finishes to match surrounding hardware and interior trim.\u003c\/p\u003e\u003cp\u003eBoth versions share the same 2-module layout for ø 60 mm round boxes and use screw fixing; the difference is the visible color finish.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM08506.BR (Color: Bronze). Bronze tone similar to RAL 1036 for darker metal accents and warm wood interiors.\u003c\/li\u003e\n\u003cli\u003eVM08506 (Color: Gold). Gold tone similar to RAL 1035 for a lighter anodized look in bright cabins and consoles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFits ø 60 mm round mounting boxes when used with the matching Vimar mounting frame 08502. The opening pattern is for a 2-module Vimar 8000 configuration, so confirm your inserts and frame match the 8000 module system before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSet the mounting frame so it sits flat on the box, then position the cover plate and tighten the fixing screws evenly until snug. On boats, avoid over-tightening on thin liners and re-check fasteners after the first few trips if the panel is in a high-vibration area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon locations include cabins, nav stations, galleys, heads, and protected cockpit consoles where Vimar 8000 switches or sockets are installed. It is a straightforward way to keep a uniform faceplate size and finish across a refit or new panel build.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a soft cloth and mild soap as needed, then rinse with fresh water after salty trips. Skip abrasive pads and aggressive cleaners so the matt anodized finish keeps its look.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gold","offer_id":51550413783286,"sku":"APL577989-V2","price":6.65,"currency_code":"USD","in_stock":false},{"title":"Bronze","offer_id":51550413816054,"sku":"APL577989-V1","price":8.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1312269_apl577989.jpg?v=1787794147"},{"product_id":"apl337923","title":"Vimar By-me Plus Line Coupler, 29V Nominal Supply, DIN Rail TH35, Electrical Isolation, Message Filtering","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01845.1 is a line coupler used to connect two By-me Plus bus lines while keeping the lines electrically separated. It works on a 29 V bus supply, draws 30 mA, and mounts on a DIN 60715 TH35 (EN 50022) rail, taking up 2 DIN modules (35 mm) in your electrical cabinet.\u003c\/p\u003e\u003cp\u003eOn a boat, this is typically installed in the main distribution panel or an automation cabinet when the bus layout needs two powered sections, or when two lines need to communicate without tying the wiring together directly. The unit must be powered from both sides, so each connected line should have its own bus power available.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCouples two By-me Plus bus lines while maintaining electrical separation between the lines\u003c\/li\u003e\n\u003cli\u003eRated supply voltage: 29 V bus; the device must be powered from both sides\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 30 mA\u003c\/li\u003e\n\u003cli\u003eDissipated power: 800 mW average, 1100 mW maximum\u003c\/li\u003e\n\u003cli\u003eDIN rail mounting on DIN 60715 TH35 (EN 50022); occupies 2 modules of 17.5 mm (35 mm total)\u003c\/li\u003e\n\u003cli\u003eFilters bus traffic so only relevant messages pass between lines, with a manual routing mode available\u003c\/li\u003e\n\u003cli\u003eConfigured using the View Pro app; the Function button supports reset and manual routing functions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis coupler is intended for Vimar By-me Plus bus installations that use a 29 V bus supply. It is not a KNX, KNX-RF, or LON coupler.\u003c\/p\u003e\u003cp\u003eBecause it is a DIN device, it belongs inside a protected electrical cabinet rather than in an exposed location. Plan space for a 2-module unit and leave room for clean cable routing and strain relief, especially in high-vibration installs.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eClip the unit onto a TH35 DIN rail and wire each bus side to match your system topology. In marine panels, keep bus wiring organized and supported so vibration does not work connections loose over time.\u003c\/p\u003e\u003cp\u003eConfiguration is handled through the View Pro app. The Function button provides a reset procedure and a manual mode that routes all messages, with an automatic timeout after 2 hours.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a low-voltage bus device, so treat its cabling and terminations like any other SELV circuit on board. In mixed-voltage cabinets, keep mains conductors (230 V AC) physically separated from SELV wiring to reduce noise pickup and to keep the panel serviceable.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon layouts include splitting an automation backbone between zones such as salon and cabins, or joining a secondary panel into the same By-me Plus system while keeping each side independently powered. It is a practical fit for refits where the bus is being extended into a new area of the vessel and you want clearer segmentation between lines.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550428004598,"sku":"APL337923","price":550.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826646_apl-lyh-jal-e4k.jpg?v=1787794473"},{"product_id":"apl624008","title":"Vimar Plana 3-Position 2-Button 2-Way Switch, 2P, 10AX, 250V, Central OFF Position","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Plana Series is a 2-button 2P 10AX 250 V two-way switch range with 6 terminals, directional arrows, and a central OFF position. It is a flush-mounted built-in switch for Plana modular installations where a directional function needs a clear stop position in the middle.\u003c\/p\u003e\u003cp\u003eFor boat interiors, this style of switch makes sense in protected cabin and panel locations where a clean built-in finish matters and the circuit needs a center-off layout. The body is thermoplastic and halogen-free, the protection rating is IP40, and the switch also supports self-ballasted lamp loads up to 100 W.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-button 2P 10AX switch rated at 250 V with a 6-terminal connection layout\u003c\/li\u003e\n\u003cli\u003eCentral OFF position with directional arrows for circuits that need controlled up and down or forward and reverse style switching\u003c\/li\u003e\n\u003cli\u003eFlush-mounted built-in format with snap fastening for Plana series installations\u003c\/li\u003e\n\u003cli\u003eThermoplastic, halogen-free construction with IP40 protection for dry interior locations\u003c\/li\u003e\n\u003cli\u003eGlossy finish options in white or silver to match the surrounding Plana trim\u003c\/li\u003e\n\u003cli\u003eSupports self-ballasted lamp loads up to 100 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis switch is offered in two finish options within the same Plana configuration.\u003c\/p\u003e\u003cp\u003eAcross both variants, the switching layout, 10AX 250 V rating, 6-terminal connection, central OFF position, and flush-mount format stay the same. The visible color and surface treatment change between the two versions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM14060.SL, Color Silver. Silver finish with a glossy lacquered surface, similar to RAL 9006. It fits spaces where the switch is meant to stand out a little more against darker or metallic trim.\u003c\/li\u003e\n\u003cli\u003eVM14060, Color White. White finish with a glossy untreated surface, similar to RAL 9003. It blends more easily into light cabin liners, accommodation areas, and other interior panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a built-in switch body with snap fastening, so it should be matched to the correct Plana support and finishing parts already used in the panel or bulkhead. Before ordering, check the module layout and confirm rear clearance for the device depth, which is about 42.5 mm on the white version and about 42.9 mm on the silver version.\u003c\/p\u003e\u003cp\u003eBecause the protection level is IP40, it belongs in enclosed interior spaces rather than exposed helm faces, open cockpit surfaces, or washdown areas. It is a sensible fit for refit work on boats that already use Vimar Plana modules and want the same look across cabins and control points.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis switch suits boats that use modular interior fittings and need a center-off directional switch in accommodation spaces, enclosed utility areas, or other protected locations. It is also a straightforward match for projects where the finish needs to stay consistent with other Plana switches and outlets already installed on board.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550430200054,"sku":"APL624008-3","price":32.49,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550430232822,"sku":"APL624008-8","price":43.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827554_apl624008.jpg?v=1787794604"},{"product_id":"apl444410","title":"Vimar SICURY S11 to P30 Socket Adapter, 250V, 10A Plug, 16A Outlet","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar SICURY Series is a 1-way plug adaptor that converts an Italian S11 2P+E 10 A plug connection to an Italian P30 2P+E 16 A socket outlet. It is rated 250 V~ with a 10 A current rating and a maximum load of 1500 W, so it is meant for appliances and accessories that stay within that limit.\u003c\/p\u003e\u003cp\u003eOn board, this adaptor makes sense where the boat or dockside supply side is fitted for an S11 connection but the equipment or extension lead needs a P30 outlet format. The P30 outlet uses lateral and central earth contacts, which matters when you are matching it to existing Italian standard plugs and socket layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eS11 2P+E 10 A plug on the supply side and P30 2P+E 16 A socket outlet on the load side\u003c\/li\u003e\n\u003cli\u003e250 V~ adaptor with 10 A current rating and 1500 W maximum load\u003c\/li\u003e\n\u003cli\u003e1-way format for single-device connection in portable or plug-in installations\u003c\/li\u003e\n\u003cli\u003eP30 outlet with lateral and central earth contacts for Italian standard compatibility\u003c\/li\u003e\n\u003cli\u003eAvailable in black or white to match surrounding outlets, panels, or interior trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis adaptor is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eThe listed variants differ by finish color. The connection format, electrical rating, and outlet style remain the same across both options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM00302.B: Color White. The lighter finish blends more quietly into white panels, cabin trim, or lighter interior spaces.\u003c\/li\u003e\n\u003cli\u003eVM00302: Color Black. The darker finish works with black switchgear, darker fascias, or console areas where a darker outlet is already in place.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adaptor is for Italian standard plug and socket layouts. Check that the supply side on the vessel, dock, or service area accepts an S11 plug and that the equipment side needs a P30 outlet before ordering. It is a practical match for boats with Italian wiring devices in cabins, galleys, or utility spaces where portable appliances, chargers, or small equipment move between outlets.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe adaptor is a simple plug-in accessory, so it is useful where you need to bridge two Italian outlet formats without changing the installed socket. Keep the connected load within the 1500 W limit and use it in the same way you would any onboard mains accessory, with attention to the vessel electrical setup and the location where it will be used.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Black","offer_id":51550443962614,"sku":"APL444410-V2","price":5.2,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550443995382,"sku":"APL444410-V1","price":5.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1313934_apl444410.webp?v=1787794909"},{"product_id":"apl617761","title":"Vimar Idea Netsafe RJ45 Phone Jack, 8\/8, Screw Terminals","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Net Safe 16337 is an RJ45 phone jack module with an 8-position, 8-conductor (8\/8) connection and rear screw terminals.\u003c\/p\u003e\u003cp\u003eIt is an unshielded (not screened) jack intended for low-voltage data and telecommunication runs where you want an outlet that sits flush in a Vimar IDEA modular plate, such as at a nav station, desk, or cabin bulkhead.\u003c\/p\u003e\u003cp\u003eThe rear terminals suit round cable and terminate under screws, so you can land conductors without a punch-down tool. It is not suitable for flat cable, litz wire conductors, or solid-core conductors.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRJ45 8(8) jack for 8-position, 8-conductor terminations\u003c\/li\u003e\n\u003cli\u003eRear screw terminals for field wiring without a punch-down tool\u003c\/li\u003e\n\u003cli\u003eUnshielded connector for standard voice and data cabling where shielding is not required\u003c\/li\u003e\n\u003cli\u003eSuitable for round cable entry; not intended for flat cable or solid-core conductors\u003c\/li\u003e\n\u003cli\u003eNo special tool required for termination\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis module is offered in two colour options to match different Vimar plate and trim finishes.\u003c\/p\u003e\u003cp\u003eThe visible face colour is what changes across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16337.B: Color White. Keeps the outlet visually consistent with white Vimar frames and cover plates.\u003c\/li\u003e\n\u003cli\u003eVM16337: Color Gray. Matches gray-toned plates and adjacent devices for a uniform panel finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module into a compatible Vimar IDEA support and cover plate, then route the cable into the back box with enough slack to work comfortably on the terminals. Strip the conductors cleanly, land each conductor under the correct screw terminal, and keep the jacket supported so movement in the wall does not pull on the terminations.\u003c\/p\u003e\u003cp\u003eOn board, keep low-voltage comms cabling separated from high-current DC runs where practical, especially near battery banks, inverters, and engine harnesses. For best longevity, place the outlet in a dry interior area where the plug and cord will not be exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a modular connector for Vimar IDEA system installations and is commonly used as a phone or general RJ45 outlet point within structured wiring. It is a good match for refits where the vessel already uses Vimar IDEA plates and you need an RJ45 point for a handset line or an onboard network connection. Confirm the plate system and module format on your boat before ordering so it seats correctly in the existing frame.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550446584054,"sku":"APL617761-V8","price":41.5,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":51550446616822,"sku":"APL617761-V4","price":41.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364918_apl617761_jpeg.jpg?v=1787794979"},{"product_id":"apl196720","title":"Vimar Arké Round Cover Plate, 1 Module, Natural Wood","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Arké 19671 Round Cover Plate is a 1 module natural wood cover plate for ARKÉ wiring devices, with a 94.5 x 94.5 mm face size and an 8.5 mm depth. It gives a finished look to a single switch, socket, or control point while keeping the softer round profile used across the Arké range.\u003c\/p\u003e\u003cp\u003eThis plate can be mounted horizontally or vertically and is intended for built in installations with the matching 1 module ARKÉ support. On board, it makes the most sense in protected interior spaces such as cabins, saloons, enclosed helm stations, and other dry areas where the electrical trim is visible and the finish matters.\u003c\/p\u003e\u003cp\u003eThe plate itself is IP00, so it is not the piece to use in exposed weather locations or anywhere that sees washdowns and direct spray. For marine refits and new builds, it works best when you are matching an ARKÉ based interior system and want a wood finish that ties into joinery, cabinetry, or trim panels.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 module Round cover plate for the Vimar ARKÉ series\u003c\/li\u003e\n\u003cli\u003eNatural wood construction with a matte untreated surface\u003c\/li\u003e\n\u003cli\u003e94.5 x 94.5 mm overall size with 8.5 mm depth\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical mounting\u003c\/li\u003e\n\u003cli\u003eSuitable for built in installations\u003c\/li\u003e\n\u003cli\u003eClamp fixing type and halogen free construction\u003c\/li\u003e\n\u003cli\u003eIP00 rated, which makes it an interior trim component for protected locations\u003c\/li\u003e\n\u003cli\u003eOffered in three wood finishes under the same Arké 19671 range\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in multiple natural wood finishes within the same Arké 1 module Round plate range.\u003c\/p\u003e\u003cp\u003eAcross the range, the plate format stays the same at 1 module, 94.5 x 94.5 mm, with the same 8.5 mm depth, horizontal or vertical mounting, and the same interior use profile. What changes between variants is the wood finish and visual tone.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM19671.52, Color Cherrywood. This finish has a warmer reddish brown look that suits interiors with richer timber accents and darker joinery.\u003c\/li\u003e\n\u003cli\u003eVM19671.53, Color Maple. This is the lightest finish in the group and works well where a paler wood tone keeps the electrical point less prominent on light panels.\u003c\/li\u003e\n\u003cli\u003eVM19671.51, Color Walnut. This finish carries a deeper brown tone that pairs well with traditional cabin furniture and darker interior trim.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cover plate is specific to the ARKÉ system and to a single module layout. That matters on boats, because decorative plates, device supports, and mechanisms are not universal across electrical series even when the visible opening looks similar. Matching the series and the 1 module support behind the plate is the key fit check before ordering.\u003c\/p\u003e\u003cp\u003eThe square 94.5 mm front size gives enough visual coverage for a clean finish around the installed device without taking up much panel space. That makes it useful where the switch or outlet position is visible in cabin furniture, bulkheads, or other finished interior panels.\u003c\/p\u003e\u003ch6\u003eInstallation and onboard use\u003c\/h6\u003e\u003cp\u003eFor marine interiors, this plate is a good match for owners, yard teams, and refit installers working on enclosed accommodation spaces rather than exterior weather decks. It suits projects where the electrical hardware needs to sit neatly within a wood finished interior and where the boat is already using Vimar ARKÉ components.\u003c\/p\u003e\u003cp\u003eBecause the surface is untreated natural wood and the protection rating is IP00, the plate belongs in dry, sheltered locations. In practical terms, that means cabin and saloon switch points, interior bulkheads, or enclosed helm areas, not open cockpits, transoms, or other positions exposed to spray, salt, or frequent cleaning water.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Cherrywood","offer_id":51550448025846,"sku":"APL196720-V1","price":68.9,"currency_code":"USD","in_stock":true},{"title":"Walnut","offer_id":51550448058614,"sku":"APL196720-V4","price":68.9,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":51550448091382,"sku":"APL196720-V3","price":68.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0366385_apl196720_jpeg.jpg?v=1787795001"},{"product_id":"apl220821","title":"Vimar Frame Fixing Screw, 35mm, Cross-Slotted Head, For Rectangular Mounting Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM07937 is a 35 mm fixing screw used to secure a mounting frame onto a rectangular mounting box. It uses a cross-slotted head so it can be tightened with a common Phillips screwdriver, which helps when you are working inside a helm panel, a distribution box, or a compact electrical enclosure.\u003c\/p\u003e\u003cp\u003eOn a boat, this kind of small hardware matters when you are reworking switches, outlets, and control panels and need the frame to sit square to the box after everything is wired and dressed. Confirm that your frame and rectangular box are the type that use frame-fixing screws and that a 35 mm length will not foul wiring or device bodies behind the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e35 mm length for fixing mounting frames on rectangular mounting boxes\u003c\/li\u003e\n\u003cli\u003eCross-slotted head for installation with standard Phillips screwdrivers\u003c\/li\u003e\n\u003cli\u003eUseful replacement when original frame screws are missing after rewiring or refits\u003c\/li\u003e\n\u003cli\u003eSupports clean frame alignment in panels and enclosures when tightened to a snug fit\u003c\/li\u003e\n\u003cli\u003eCompact spare to keep in an onboard electrical kit for quick service work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eStart the screw by hand so it threads smoothly into the box insert, then tighten until the frame is firmly seated and aligned. Stop once the frame is secure, since over-tightening can distort plastic frames or damage threads in the mounting box.\u003c\/p\u003e\u003cp\u003eBefore final tightening, check clearance behind the panel. A 35 mm screw is typically used where shorter screws do not fully engage, but you still want to avoid contacting wiring bundles or the back of installed devices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis screw fits the kind of work that comes up during helm upgrades, cabin refits, or service on control units where rectangular mounting boxes are used. It is a good match for boat owners who handle their own panel work and for yards that keep spares on hand for ongoing electrical maintenance.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIn damp lockers or exposed console areas, include fasteners in routine inspections and re-tighten only if needed. If a screw shows corrosion or seizing, replace it rather than forcing it, especially when it threads into embedded inserts.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550448255222,"sku":"APL220821","price":0.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826818_apl-e7v-pvm-5pa.jpg?v=1787795016"},{"product_id":"apl122559","title":"Vimar Relay Actuator, 16A Changeover, 120-230V, DIN Rail, Circulation Pump","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01850.2 is a By-me Plus DIN-rail relay actuator that switches one 120-230 V AC circuit using a single change-over contact (NO\/C\/NC) rated up to 16 A on resistive loads. It mounts on a 60715 TH35 rail and takes up 2 DIN modules (2 x 17.5 mm), so it fits cleanly inside a standard electrical distribution panel.\u003c\/p\u003e\u003cp\u003eControl comes from the TP bus (29 V bus supply), which makes it a practical match on boats that already run a By-me Plus automation backbone and want an AC load under centralized control. A front push button supports manual operation for service checks and commissioning work when you need the load to toggle locally.\u003c\/p\u003e\u003cp\u003eThe enclosure is IP20, so plan on installing it inside a dry, protected cabinet rather than in a splash zone or anywhere exposed to washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eSingle change-over relay output (NO\/C\/NC) for 120-230 V AC load switching\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRated for 16 A resistive loads; includes defined ratings for common lighting and motor-type loads\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTP bus connection with 29 V bus supply for By-me Plus system integration\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eManual management push button on the front for local relay actuation when needed\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDIN-rail mount on 60715 TH35; footprint is 2 modules (2 x 17.5 mm)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP20 housing for installation inside an enclosure; operating temperature range -5 C to +45 C\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRAL 7035 grey finish that matches typical electrical panel interiors\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit on a standard TH35 DIN rail inside a distribution board or automation cabinet, leaving enough room for cable bend radius and service access to the front buttons. Keep the TP bus conductors routed separately from mains wiring and follow your vessel wiring practices for strain relief and vibration management.\u003c\/p\u003e\u003cp\u003eTerminations are straightforward: the TP bus lands on the bus terminals, and the switched circuit lands on the relay terminals (NO, C, NC). Using the common and either NO or NC contact lets you choose whether the load is normally off or normally on when the relay is at rest.\u003c\/p\u003e\u003ch6\u003eElectrical and load notes\u003c\/h6\u003e\u003cp\u003eThis actuator is meant for controlling 120-230 V AC loads through its relay contacts. For a typical shore-power or generator-fed circuit on board, size upstream overcurrent protection so it does not exceed 16 A, and match the protection method to your panel design and applicable marine electrical standards.\u003c\/p\u003e\u003cp\u003eWhen switching anything other than a resistive load, the allowable current can be lower. Typical examples include incandescent lighting at 10 A, fluorescent or energy-saving lamps at 1 A, electronic transformers at 4 A, ferromagnetic transformers at 10 A, and motor-type loads at 3.5 A (cos phi 0.6). If you are driving contactors, pumps, or transformers, confirm the inrush and steady-state current so the relay is not being asked to do more than it is rated for.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis type of bus-controlled relay actuator is a good fit when you want automation control over an AC load that lives inside the electrical panel. Common marine examples include managing a circulation pump, a fan coil accessory, a lighting feed, or a control input to a separate power device, as long as the circuit stays within the relay ratings.\u003c\/p\u003e\u003cp\u003eIf your boat only needs 12 V or 24 V DC switching, use a relay module that is explicitly rated for DC loads and the specific current involved.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550450122998,"sku":"APL122559","price":171.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826652_apl-qmj-xs1-rrr.jpg?v=1787795112"},{"product_id":"apl461286","title":"Vimar LED Driver, 120V 60Hz, 350\/500\/700mA, IP20, MASTER Dimmer Compatible","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM01875.120 is a constant-current LED driver that runs from 120 V AC, 60 Hz and supplies 350 mA, 500 mA, or 700 mA (selectable) to low-voltage LED modules and strips wired in series. Output voltage can rise as high as 50 V as it regulates current, with maximum load up to 15 W at 350 mA, 22 W at 500 mA, or 27 W at 700 mA.\u003c\/p\u003e\u003cp\u003eIt supports phase-cut dimming when used with compatible multiload MASTER dimmers, and it can also be switched on and off at full brightness using the synchronism input. The housing is IP20 and intended for protected, dry interior spaces; it is not meant for areas where it can be exposed to drips, spray, or washdowns.\u003c\/p\u003e\u003cp\u003eClass II insulation and galvanic isolation between the mains side and the LED side help keep the installation electrically separated. The enclosure measures 224 x 60 x 36 mm and is built for screw mounting inside cabinets, behind panels, or other sheltered voids.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120 V AC, 60 Hz input with selectable constant-current outputs of 350 mA, 500 mA, or 700 mA (jumpers on the secondary side).\u003c\/li\u003e\n\u003cli\u003eUp to 50 V output with maximum load ratings of 15 W (350 mA), 22 W (500 mA), or 27 W (700 mA).\u003c\/li\u003e\n\u003cli\u003eDimmable with multiload MASTER dimmers configured for leading-edge control; on\/off control is also possible via the synchronism input.\u003c\/li\u003e\n\u003cli\u003eLED load connection is series-only, using dedicated + and - output terminals.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 1 A high-breaking-capacity fuse, plus thermal, short-circuit, and overload protection.\u003c\/li\u003e\n\u003cli\u003eIP20, internal-use construction with Class II insulation and 4 kVrms galvanic isolation between primary and secondary.\u003c\/li\u003e\n\u003cli\u003eStandby consumption under 0.5 W and active PFC (power factor up to 0.94 at full load).\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -5 C to +45 C (indoor).\u003c\/li\u003e\n\u003cli\u003e224 x 60 x 36 mm body with screw fixing and terminal layout for L, N, synchronism (S), and LED output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis driver is meant for constant-current LED loads that are rated for 350 mA, 500 mA, or 700 mA. Because the output is current-regulated rather than a fixed 12 V or 24 V, it should be paired with LED modules or strips specified for one of those currents and intended to be wired in series.\u003c\/p\u003e\u003cp\u003eTotal LED load needs to stay within the wattage limit for the selected current setting. The 50 V maximum output also sets the upper limit for how many LEDs can be placed in a single series string.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the unit in a dry, sheltered location with space around it for ventilation. Keep it out of areas that see condensation, drips, spray, or washdowns.\u003c\/p\u003e\u003cp\u003eSelect the required output current using the on-board jumpers before applying mains power. Wire 120 V AC supply to the L and N terminals, and connect the LED load to the + and - terminals, keeping the LED modules in series as required for constant-current operation.\u003c\/p\u003e\u003ch6\u003eElectrical and control integration\u003c\/h6\u003e\u003cp\u003eFor dimming, the synchronism terminal is used with compatible multiload MASTER dimmers set for leading-edge control. A single master dimmer can control up to 10 power supplies, with up to 100 m of cable from the control device to the last driver in the run.\u003c\/p\u003e\u003cp\u003eOn the LED side, the recommended maximum cable length to the LED modules is 10 m when using 1.5 mm2 conductors. For simple on\/off control at full brightness, a switch can be wired between phase and the synchronism input.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis driver fits boats that have a 120 V AC distribution from shore power, a generator, or an inverter and need a constant-current supply for interior LED modules. It works well behind cabin headliners, inside joinery, and in other protected spaces powering salon, stateroom, or accent lighting zones where phase-cut dimming is part of the control plan.\u003c\/p\u003e\u003cp\u003eIf your lighting project lives in damp lockers, engine spaces, or exposed deck areas, plan on a sealed driver rated for that environment. This model is for protected interior installs where IP20 construction is appropriate.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550495015158,"sku":"APL461286","price":176.7,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826667_apl-ram-wpq-dm5.jpg?v=1787795614"},{"product_id":"apl550558","title":"Vimar Surface-Mount Junction Box, IP44, 65 mm Dia, 35 mm Deep, 4 Cable Entries, 6pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV55001 is an IP44-rated surface-mount junction box for protecting wiring connections where you need splash protection and quick access for service.\u003c\/p\u003e\u003cp\u003eIt has a round body with a 65 mm diameter and 35 mm depth, which helps when you are fitting it behind panels or inside lockers where space is tight. The cover is a blind, snap-closed style, so you can open it for inspection without tools in most installations.\u003c\/p\u003e\u003cp\u003eFour trimmable step membrane inlets support conduit\/tube diameters of 20 mm or 25 mm. Rated insulation voltage (Ui) is 450 V, and the specified operating temperature range is 0°C to 60°C.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP44 protection level for locations exposed to dust and splashing water\u003c\/li\u003e\n\u003cli\u003eCompact footprint with a 65 mm diameter and 35 mm depth for confined mounting areas\u003c\/li\u003e\n\u003cli\u003eSurface mounting on walls or ceilings for straightforward retrofits and clean routing\u003c\/li\u003e\n\u003cli\u003eSnap-closed blind cover for fast access during troubleshooting and re-termination\u003c\/li\u003e\n\u003cli\u003eFour trimmable step membrane inlets to suit cable and conduit entry needs\u003c\/li\u003e\n\u003cli\u003eSupports 20 mm and 25 mm tube diameters for common marine conduit runs\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey finish for a neutral look inside technical spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box on a flat surface where the cover can open fully and where the inlets can be oriented to keep water from pooling around cable entries. Trim each step membrane gradually so the cable or conduit passes through snugly, then keep bends gentle to avoid stressing terminations inside the box.\u003c\/p\u003e\u003cp\u003eBecause this is a junction box, plan enough slack to re-terminate in the future and leave room for connectors or terminal blocks you may be using inside. After wiring, confirm the cover is fully snapped closed around the entire perimeter.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is meant for surface mounting and routing smaller accessory wiring runs or control wiring where a protected splice point is needed. Conduit\/tube sizing is 20 mm or 25 mm, and the four entry points make it easier to bring in a feed and branch circuits without overcrowding a single side.\u003c\/p\u003e\u003cp\u003eWith an IP44 rating, it suits areas that see spray or condensation but are not subject to direct, sustained water exposure. For locations that can flood or take pressurized washdowns, use a higher protection level enclosure instead.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon installs include behind a helm panel, inside a console, in a cockpit locker that stays mostly dry, or on an interior bulkhead where wiring transitions from a trunk line into smaller branches.\u003c\/p\u003e\u003cp\u003eThis is a good match for boat owners and installers who want a small junction point with splash protection and a clean surface-mount layout. It also fits refits where you are adding new accessories and need a tidy place to manage splices without opening up larger panels.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550495244534,"sku":"APL550558","price":3.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827185_apl-ld0-9xk-vsv.jpg?v=1787795627"},{"product_id":"apl652999","title":"Vimar Hollow-Wall Flush-Mount Box, 6\/7-Module, 68 mm Cutout, GW 850°C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71706 is a 6 to 7-module flush-mount box for hollow walls, sized to hold up to 7 modular electrical devices behind a finished panel.\u003c\/p\u003e\u003cp\u003eThe cutout pattern is laid out around a 68 mm hole saw, which helps get a clean opening in materials like plasterboard and similar thin panels. With a 50 mm internal depth and an overall footprint of 193 mm by 72.5 mm, it gives you workable space for wiring while staying tidy behind liners and console panels.\u003c\/p\u003e\u003cp\u003eIt uses halogen-free plastic and carries a glow-wire rating of 850 °C. The box is rated IP00, so it belongs in dry, protected locations rather than anywhere that sees spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 to 7-module in-line box for hollow walls, supports up to 7 device positions\u003c\/li\u003e\n\u003cli\u003eHole preparation uses a 68 mm hole saw, with a centring plate on the back to help line things up\u003c\/li\u003e\n\u003cli\u003eMetal fins clamp to panel thicknesses from 1 to 38 mm for a firm hold in liners and bulkheads\u003c\/li\u003e\n\u003cli\u003eBreak-out openings for conduit or sleeving in 16, 20, or 25 mm sizes, with 18 entry points total\u003c\/li\u003e\n\u003cli\u003eMetal screw lugs for mounting device supports by screwing\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with glow-wire rating 850 °C; IP00 for dry, protected installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMark the hole pattern using the rear centring plate, drill with a 68 mm hole saw, then finish the opening so the box sits flat against the panel surface.\u003c\/p\u003e\u003cp\u003eBring wiring or conduit in through the break-outs, position the box, and tighten the metal fins until the box is secure. Plan for service access by leaving enough slack inside the 50 mm cavity to remove devices later without pulling on the conductors.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for installations that use a 6 to 7-module in-line support that screws to the box. Confirm the device support and faceplate you plan to use are sized for up to 7 modules and match the fixing points.\u003c\/p\u003e\u003cp\u003eBecause it is a hollow-wall box, it works best where there is a void behind the surface, such as cabin liners, furniture panels, and lightweight bulkheads.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon onboard locations include cabin bulkheads, nav stations, galley panels, and helm consoles where you want a flush bank of switches or outlets without adding a surface box.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits and new builds that route wiring in conduit behind interior liners. For damp areas, keep the installation behind a sealed front assembly and away from direct spray, since the box itself is IP00.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550501896438,"sku":"APL652999","price":11.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0368533_apl652999_jpeg.jpg?v=1787795634"},{"product_id":"apl101755","title":"Vimar 8000 Series 1-Way Rocker Switch, 1-Pole, 16AX, 250V, Beige","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM08001 is a 1-pole, 1-way switch module for Vimar 8000 Series installations, rated 16 AX at 250 V~ for standard on-off control from a single location.\u003c\/p\u003e\u003cp\u003eIt is commonly used on boats for interior circuits where you want a clean modular look, such as cabin lighting panels, heads, or helm-side switch banks that sit behind a cover plate. The switch is also rated for self-ballasted lamps up to 200 W, which matters when you are switching modern electronic loads rather than a simple resistive lamp.\u003c\/p\u003e\u003cp\u003eWith an IP40 rating, it belongs in protected interior spaces, not in places that see direct spray or washdowns. The beige matte finish is similar to RAL 9001, which helps match classic yacht interiors and existing 8000 Series trims.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, 1-way on-off switching for control from one location\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating for AC circuits that include electronic or self-ballasted loads\u003c\/li\u003e\n\u003cli\u003eSupports self-ballasted lamps up to 200 W\u003c\/li\u003e\n\u003cli\u003eFlush-mounted modular format sized as a single 8000 Series module\u003c\/li\u003e\n\u003cli\u003eSnap-in fastening that suits multi-module frames and cover plates\u003c\/li\u003e\n\u003cli\u003eScrewed terminals for solid connections where vibration is a factor\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior, sheltered mounting locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a single-module device with a face size that suits 8000 Series grids and plates. Check clearance behind the mounting surface, especially in thin bulkheads or instrument panels, since wiring bend radius can be the limiting factor more than the module itself.\u003c\/p\u003e\u003cp\u003eFor a neat finish on board, mount it where the front is protected from knocks and moisture, and where the rear of the switch stays dry and ventilated. If you are replacing an older switch, confirm the module system and frame style match the 8000 Series layout before pulling the old wiring.\u003c\/p\u003e\u003ch6\u003eElectrical and system notes\u003c\/h6\u003e\u003cp\u003eThis switch is rated for 250 V~ AC circuits. If your boat is primarily 12V or 24V DC for lighting, use a DC-rated switch for those loads rather than assuming an AC rating will translate.\u003c\/p\u003e\u003cp\u003eBecause it is a 1-pole switch, it opens a single conductor. For marine AC systems, switching practices depend on the circuit and local standards, so wire it in a way that matches your vessel’s electrical scheme and protection devices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis module is a good match for refits and new builds that already use Vimar 8000 Series devices and want consistent switching across cabins, salon, and service areas. It also makes sense when you are standardizing switch feel and appearance across a panel with mixed functions.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the front with a lightly damp cloth and avoid solvents that can haze matte plastics. If the switch is installed in a high-vibration area, it is worth rechecking terminal tightness during routine electrical inspections with power isolated.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550515003638,"sku":"APL101755","price":9.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826820_apl-90c-brw-mge.jpg?v=1787795761"},{"product_id":"apl212528","title":"Vimar Eikon Interchangeable 2-Module Button, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20532 series is a range of interchangeable 2-module buttons for Eikon control points. These thermoplastic front buttons sit on the visible side of the installation and are offered with different symbols, colors, and button styles to match the function of the switch position behind them.\u003c\/p\u003e\u003cp\u003eThis range covers both rocker push-button and simple push-button layouts, depending on the version selected. It is the front button only, not the complete mechanism, so it is mainly used when replacing a worn part, matching the marking on an existing control, or keeping the finish consistent across a panel.\u003c\/p\u003e\u003cp\u003eOn board, this type of part makes the most sense in protected interior areas such as a cabin, saloon, or enclosed helm console where Vimar Eikon hardware is already installed. It is a practical fit when the goal is to refresh the face of an existing switch point without changing the whole assembly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable 2-module front button for the Vimar Eikon range\u003c\/li\u003e\n\u003cli\u003eAvailable across the range in grey, white, and silver\/Next finishes\u003c\/li\u003e\n\u003cli\u003eSymbol options in the range include arrows, ON\/OFF, regulation markings, name-plate versions, and plain versions without a symbol\u003c\/li\u003e\n\u003cli\u003eSome versions are made for rocker push buttons, while others are made for simple push buttons\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eUseful for replacing a marked or worn button while keeping the existing Eikon installation in place\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range varies mainly by finish and front marking. Depending on the version, the button face is available in grey, white, or silver\/Next, with symbol options that cover directional arrows, ON\/OFF markings, regulation-style markings, name-plate versions, or a plain face without a symbol.\u003c\/p\u003e\u003cp\u003eThe range also includes versions for different button actions. Some are intended for rocker push buttons, while plain and name-plate versions are used with simple push buttons. Before ordering, the visible symbol and finish should be matched to the existing panel, and the button style should be matched to the mechanism already installed behind the cover plate.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese buttons are part of the Eikon family, so they should be matched to an existing Eikon installation rather than treated as a universal switch part. The 2-module format is fixed across the range, but the front symbol and the type of push action must line up with the insert already on the wall or panel.\u003c\/p\u003e\u003cp\u003eBecause this is only the front button, electrical rating, control method, and any network or system compatibility come from the installed mechanism behind it, not from the button itself. That matters on boats where the same panel may be tied into lighting, automation, or auxiliary switching through different inserts.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eReplacement is straightforward when you are working within an existing Eikon setup and already know the correct button style. The main check is whether the location uses a rocker push button or a simple push button, then matching the face marking to the function shown on the panel.\u003c\/p\u003e\u003cp\u003eThis is a sensible choice for boat owners, refitters, and marine electricians who are cleaning up an interior switch bank, standardizing labels, or replacing a damaged front button without rebuilding the whole control point.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Silver \/ ON\/OFF Symbols","offer_id":51550540202230,"sku":"APL212528-V8","price":10.66,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Name-Plate","offer_id":51550540234998,"sku":"APL212528-V18","price":8.25,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Simple","offer_id":51550540267766,"sku":"APL212528-V17","price":10.25,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Sun Regulation Symbol","offer_id":51550540300534,"sku":"APL212528-V14","price":10.25,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Sun Regulation Symbol","offer_id":51550540333302,"sku":"APL212528-V12","price":8.25,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Arrows Symbol","offer_id":51550540366070,"sku":"APL212528-V1","price":8.58,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Name-Plate","offer_id":51550540398838,"sku":"APL212528-V20","price":10.25,"currency_code":"USD","in_stock":false},{"title":"White \/ Regulation Symbol","offer_id":51550540431606,"sku":"APL212528-V11","price":8.25,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Without Symbol","offer_id":51550540464374,"sku":"APL212528-V21","price":10.25,"currency_code":"USD","in_stock":false},{"title":"Grey \/ ON\/OFF Symbols","offer_id":51550540497142,"sku":"APL212528-V9","price":8.58,"currency_code":"USD","in_stock":false},{"title":"Silver \/ Arrows Symbol","offer_id":51550540529910,"sku":"APL212528-V7","price":10.66,"currency_code":"USD","in_stock":false},{"title":"White \/ Arrows Symbol","offer_id":51550540562678,"sku":"APL212528-V5","price":8.58,"currency_code":"USD","in_stock":false},{"title":"White \/ Sun Regulation Symbol","offer_id":51550540595446,"sku":"APL212528-V13","price":8.25,"currency_code":"USD","in_stock":false},{"title":"White \/ Simple","offer_id":51550540628214,"sku":"APL212528-V16","price":8.25,"currency_code":"USD","in_stock":false},{"title":"White \/ ON\/OFF Symbols","offer_id":51550540660982,"sku":"APL212528-V10","price":8.58,"currency_code":"USD","in_stock":false},{"title":"White \/ Name-Plate","offer_id":51550540693750,"sku":"APL212528-V19","price":8.25,"currency_code":"USD","in_stock":false},{"title":"Grey \/ Simple","offer_id":51550540726518,"sku":"APL212528-V15","price":8.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1267155_apl212528_jpeg.jpg?v=1787796315"},{"product_id":"apl621360","title":"Vimar Eikon Push Button Mechanism, For 1-3 Module Button, 1P NO, 10A 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20008.0 is a 1-pole, normally-open (momentary) push-button mechanism rated 10 A at 250 V~ and built to accept an optional locator\/indicator light. It is a 1-module device meant for flush mounting, so it sits cleanly in a console, cabin bulkhead panel, or electrical backbox where you want a push action that returns when released.\u003c\/p\u003e\u003cp\u003eThis mechanism measures 22.3 mm wide, 49.0 mm high, and 34.6 mm deep, and it carries an IP40 protection rating for protected interior locations. The body is thermoplastic and halogen-free, with a matt anthracite finish (similar to RAL 7024) and a small label area for circuit identification.\u003c\/p\u003e\u003cp\u003eIt is supplied as the mechanism only and is intended to be completed with a compatible 1-, 2-, or 3-module button from the same system, depending on the plate layout you are building.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1P NO momentary push-button action for control functions that should not latch on\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eElectrical rating: 10 A at 250 V~\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLightable mechanism for use with compatible illuminated button\/lighting accessories\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1-module format with flush-mount installation and engage (snap) fastening\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP40 protection for dry, protected interior panels and enclosures\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThermoplastic, halogen-free construction with matt anthracite finish (similar to RAL 7024)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCompact body: 22.3 mm (W) x 49.0 mm (H) x 34.6 mm (D)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLabel space\/information surface for clear circuit marking at the panel\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting depth before you cut the panel or select the backbox, since the mechanism body is 34.6 mm deep. It is designed to snap into a compatible modular support, then be finished with the correct button and cover plate for your Eikon layout. Once installed, keep the labeling area visible so the function is obvious at a glance at the helm or inside the cabin.\u003c\/p\u003e\u003cp\u003eFor marine wiring, treat it like any other interior switching device: keep it out of direct spray, route conductors with strain relief, and use proper protection upstream for the circuit you are controlling. This type of momentary contact is commonly used to trigger relays, contactors, horns, or control inputs where you want a deliberate press-and-release action.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an Eikon-format mechanism intended to be paired with a matching 1-, 2-, or 3-module button, depending on the button style and the plate configuration. The IP40 rating makes it a better match for cabin and console interiors than exposed cockpit locations, unless it is installed inside a suitable protective enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits boats that use modular wall-plate style controls and want a clean momentary push point for functions such as a signal, reset, or a relay-driven load. It is also a good match when you want the option of a lighted button position for low-light operation in cabins or inside a covered helm console.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550578606326,"sku":"APL621360","price":15.33,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353694_apl621360_jpeg.jpg?v=1787796736"},{"product_id":"apl384378","title":"Vimar 8-Module Rectangular Flush Mounting Box, For Masonry Walls, Glow Wire 650°C, Halogen-Free Plastic, 20\/25 mm Conduit Knockouts, Light Blue","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71318 is an 8-module flush mounting box for masonry walls, sized at 145.00 mm x 124.50 mm with an inner depth of 50.00 mm and an installation depth that can be set up to 56.80 mm. It gives you a clean in-wall base for mounting 8-module device supports and keeping terminations and cable routing organized behind the finished faceplate.\u003c\/p\u003e\u003cp\u003eThe light blue body makes it easy to spot during rough-in, and the box is built around typical conduit-style installations with break-out entries for 20 mm and 25 mm runs. For marine projects, it fits best in protected, building-style spaces such as marina facilities, dock utility rooms, or interior refit areas where wiring is routed in conduit inside solid walls.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8-module rectangular flush mounting box intended for masonry walls\u003c\/li\u003e\n\u003cli\u003eOverall size 145.00 mm (L) x 124.50 mm (W) with 50.00 mm inner depth\u003c\/li\u003e\n\u003cli\u003eDepth range up to 56.80 mm to suit different wall builds and finish thickness\u003c\/li\u003e\n\u003cli\u003eGlow Wire 650°C rating for higher heat resistance in the wall cavity\u003c\/li\u003e\n\u003cli\u003eBreak-out openings for 20 mm and 25 mm conduit, with rear cable entry support\u003c\/li\u003e\n\u003cli\u003eCouplable format supports multi-box banks when using compatible coupling joints\u003c\/li\u003e\n\u003cli\u003eZinc-plated fixing lugs help keep threads clear so device supports screw in cleanly after plastering\u003c\/li\u003e\n\u003cli\u003eAccessory-ready layout supports items such as anti-mortar covers and a rack for a dividing screen\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is built around an 8-module layout, so confirm the device support and front frame you are installing are the matching 8-module format. Before cutting in, check the available cavity depth and finishing layers so the box can sit flush and still leave working room for conductors behind the device.\u003c\/p\u003e\u003cp\u003eFor conduit runs, plan entries around 20 mm or 25 mm pipe sizes and use the break-out points that keep bends gentle and cable pulls clean. If you are coupling multiple boxes, keep alignment tight at the rough-in stage so the finished frames sit straight across the whole bank.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSet the box into the masonry opening so the front edge lands flush with the intended finished surface. Pop the required knockouts, route conduits, and leave enough slack for terminations and device removal later. During plastering and finishing, keeping the box protected helps prevent debris from building up where the device support needs to seat and screw down.\u003c\/p\u003e\u003cp\u003eOnce the wall is finished, mount the device support by screwing it into the fixing lugs, then complete terminations and fit the faceplate. If you are dividing circuits inside the box, a separating screen can be fitted where your installation calls for it.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for electricians and boatyard teams building out shore-side electrical areas or interior refit spaces that use in-wall conduit and modular switching. For exterior marine locations exposed to spray or washdowns, use an enclosure that carries an appropriate IP rating for the environment.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550618943734,"sku":"APL384378","price":9.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827199_apl-ogz-5pb-ijh.jpg?v=1787797026"},{"product_id":"apl844515","title":"Vimar Eikon 2-Module Blank Module, Flush Mount, Halogen-Free Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20042 blank module is a 2-module cover insert for closing an unused position in a Vimar Eikon modular installation. It has no switching or outlet function, so it is used when a panel opening needs a neat finish while the surrounding frame and layout stay in place.\u003c\/p\u003e\u003cp\u003eIt measures 44.7 x 49.0 x 20.5 mm and is made from halogen-free thermoplastic with a matt surface. Built-in mounting with claw fastening makes it suited to refits, spare positions left for future equipment, or panels where a removed control needs to be covered without changing the rest of the assembly. The front also includes space for identification.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module blanking insert for unused positions in a Vimar Eikon modular panel\u003c\/li\u003e\n\u003cli\u003eNo electrical or control function, used to close a spare opening cleanly\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting format with claw fastening\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with a matt finish\u003c\/li\u003e\n\u003cli\u003eFront label space for panel identification\u003c\/li\u003e\n\u003cli\u003eCompact 44.7 x 49.0 x 20.5 mm size\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range is offered in three color configurations for the same 2-module blank module format.\u003c\/p\u003e\u003cp\u003eWhat changes between variants is the front color. The 2-module footprint, mounting method, material type, and basic dimensions stay the same across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20042.B: Color White. This version suits panels and trim pieces that use a white Eikon finish.\u003c\/li\u003e\n\u003cli\u003eVM20042.N: Color Silver. This version matches installations that use the silver Eikon look around the module.\u003c\/li\u003e\n\u003cli\u003eVM20042: Color Grey. This version keeps the darker grey appearance used in matching Eikon panel layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis module is intended for Vimar Eikon systems and occupies one 2-module position within that range. It is a straightforward fit when the surrounding frame and support are already set up for Eikon modular devices.\u003c\/p\u003e\u003cp\u003eOn board, it makes the most sense in protected helm, cabin, or utility panels where a spare position needs to be closed off neatly for now or kept available for a later upgrade.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eBecause it is a built-in module with claw fastening, it is best used where the panel cutout and support hardware already match the Eikon format. That makes it useful during refits when one opening is being left unused after a system change or when a panel layout is being cleaned up without replacing the whole plate.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550677795062,"sku":"APL844515-V4","price":3.75,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51550677827830,"sku":"APL844515-V5","price":4.11,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550677860598,"sku":"APL844515-V3","price":3.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363363_apl844515_jpeg.jpg?v=1787797607"},{"product_id":"apl697543","title":"Vimar Eikon Vintage 2P 2-Way Push Button, 10A, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar EIKON Series is a range of 2P 2-way push buttons rated at 10 A for flush-mounted installations in the Vintage finish line. These switches use a two-pole layout with six terminals and a central OFF position, which makes them suitable for interior control points where the switch face is part of the overall finish of the space.\u003c\/p\u003e\u003cp\u003eEach version uses built-in mounting with snap fastening and includes a label space on the device. The body measures 22.30 mm wide, 48.80 mm high, and 63.10 mm deep, which is worth checking when space is limited behind bulkheads, cabinetry, or finished interior panels on board.\u003c\/p\u003e\u003cp\u003eThis type of switch makes the most sense in protected interior areas on yachts and other vessels that already use Vimar EIKON hardware or are being fitted around that system. It works well where a flush face, metal construction, and finish-matched appearance matter as much as the switching function itself.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2P 2-way push button format with a 10 A rating and central OFF position\u003c\/li\u003e\n\u003cli\u003eSix-terminal switching layout for the Vintage device format\u003c\/li\u003e\n\u003cli\u003eBuilt-in flush mounting with snap fastening for a clean panel finish\u003c\/li\u003e\n\u003cli\u003eMetal body with integrated label space on the device\u003c\/li\u003e\n\u003cli\u003eNon-lighted configuration with no signal lamp or monitoring contact\u003c\/li\u003e\n\u003cli\u003eCompact body size of 22.30 mm x 48.80 mm x 63.10 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range changes by finish rather than by switch type. The available versions cover Bronze, Gold, Grey, Nickel, Satin Gold, and White within the same EIKON Vintage 2P 2-way push button format.\u003c\/p\u003e\u003cp\u003eAcross the range, the common points are the 2P switching layout, 10 A rating, built-in mounting style, metal construction, and label space. The visible difference from one version to another is the exterior finish and color tone.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis device belongs to the EIKON system, so the main fit check is compatibility with the rest of the series at the installation point. For marine interiors, that usually means confirming the switch location is already built around EIKON devices and that there is enough depth behind the finished surface for the 63.10 mm body.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe snap-engage mounting helps keep the front face neat once the device is seated correctly in its support, and the label space is useful when several lighting or auxiliary circuits are grouped together at a cabin entrance, saloon panel, or service area. It is a sensible choice for refit and new-build interiors where the switching hardware needs to stay visually consistent across the vessel.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550691688694,"sku":"APL697543-1","price":72.0,"currency_code":"USD","in_stock":false},{"title":"Satin Gold","offer_id":51550691721462,"sku":"APL697543-2","price":89.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550691754230,"sku":"APL697543-0","price":74.85,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":51550691786998,"sku":"APL697543-9","price":89.0,"currency_code":"USD","in_stock":false},{"title":"Nickel","offer_id":51550691819766,"sku":"APL697543-4","price":83.0,"currency_code":"USD","in_stock":false},{"title":"Bronze","offer_id":51550691852534,"sku":"APL697543-5","price":83.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0828646_apl697543.jpg?v=1787798319"},{"product_id":"apl789929","title":"Vimar Eikon Table Mounting Box, 4-Module, IP20, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon 20784 is a 4-module table mounting box for flush-mounted Eikon switching equipment. It uses a horizontal layout, has IP20 protection, and includes a cable entry for bringing wiring into the box from a protected interior location.\u003c\/p\u003e\u003cp\u003eThe housing is plastic with a matt finish, and it is halogen-free and shock resistant. This is the mounting box only, so the installation is completed with a matching mounting frame and cover plate.\u003c\/p\u003e\u003cp\u003eOn board, this type of enclosure makes sense in dry interior spaces such as a cabin desk, chart table, or other furniture surface where Eikon controls or outlets need to sit above the surface rather than inside a bulkhead. IP20 means it belongs away from spray, washdowns, and other exposed areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module format for Vimar Eikon modular switching devices\u003c\/li\u003e\n\u003cli\u003eSurface-mounted table box with horizontal mounting direction\u003c\/li\u003e\n\u003cli\u003eIP20-rated enclosure for protected interior use\u003c\/li\u003e\n\u003cli\u003ePlastic housing with matt finish, halogen-free construction, and shock-resistant body\u003c\/li\u003e\n\u003cli\u003eIntegrated cable entry for routing wiring into the enclosure\u003c\/li\u003e\n\u003cli\u003eRequires a separate mounting frame and cover plate to complete the assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations.\u003c\/p\u003e\u003cp\u003eThe change across the range is the housing color. Both versions share the same 4-module layout, IP20 protection, horizontal mounting direction, plastic construction, and cable-entry box format.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM20784.B, Color White. This version uses a white finish similar to RAL 9016, which keeps the assembly visually light on white or pale interior panels.\u003c\/li\u003e\n\u003cli\u003eVM20784, Color Grey. This version uses a grey finish similar to RAL 7024, which gives a darker look on technical panels and mixed-material interiors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for modular domestic switching devices in the Vimar Eikon range and is arranged for 4 modules. Before ordering for a boat, check that the devices you plan to install match the Eikon module system and that the finished assembly suits the available surface space.\u003c\/p\u003e\u003cp\u003eThe enclosure is about 80 mm high and 67.6 mm deep, with a width around 142.5 mm depending on the color version. That footprint matters on helm tables, nav desks, and cabin worktops where the box remains visible above the mounting surface.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe box mounts on the surface and leaves the installed devices accessible from the front. Cable entry is built into the enclosure, so it helps to plan the wire path before fastening it to timber, composite, or other interior furniture on board.\u003c\/p\u003e\u003cp\u003eThis is a good match for refits and new interior joinery where Eikon devices need a clean above-surface installation. It is most at home in cabins, saloons, and navigation stations where the environment stays dry and controlled.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550704009462,"sku":"APL789929-V2","price":53.02,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":51550704042230,"sku":"APL789929-V0","price":53.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0363940_apl789929_jpeg.jpg?v=1787798581"},{"product_id":"apl927396","title":"Vimar Idea Single Push Button, 1P NC, 16A, 250V, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea is a 1-pole normally closed push button rated at 16 A and 250 V~, offered here in ivory or gray. It is a built-in insert for the Vimar Idea modular system, with snap-in fixing, a thermoplastic body with a matte finish, and IP40 protection for protected interior mounting points.\u003c\/p\u003e\u003cp\u003eIn use, this is a momentary break-contact button, which means the circuit is closed at rest and opens while the button is pressed. The front includes a marking area, the module width is 24.8 mm, and there is no built-in illumination or feedback contact. On board, that makes it a better fit for cabins, enclosed panels, and other dry interior spaces than for exposed helm or deck locations.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NC momentary action. The contact opens while pressed and returns when released.\u003c\/li\u003e\n\u003cli\u003e16 A, 250 V~ rating for AC control circuits that require a normally closed push button.\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, protected interior installations.\u003c\/li\u003e\n\u003cli\u003eBuilt-in modular format with snap-in fixing for Vimar Idea systems.\u003c\/li\u003e\n\u003cli\u003eThermoplastic body, halogen-free construction, and a matte surface finish.\u003c\/li\u003e\n\u003cli\u003eNo illumination and no feedback contact.\u003c\/li\u003e\n\u003cli\u003eFront marking area for circuit identification at the panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two color configurations within the same Idea push-button family.\u003c\/p\u003e\u003cp\u003eThe change between the variants is the front color. Both versions keep the same 1P NC operating format, 16 A and 250 V~ rating, non-illuminated design, and IP40 protection. The published external dimensions are not identical between the two part numbers, so clearance behind the mounting point should be checked against the selected code.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16104.B, Color Ivory. The front is an ivory finish listed as RAL 9001 equivalent, which works well with light switch panels and cream-toned interior trim.\u003c\/li\u003e\n\u003cli\u003eVM16104, Color Gray. The front is a gray finish listed as RAL 7015 equivalent, which gives stronger contrast on darker panel layouts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a modular device from the Vimar Idea range, so it should be paired with the correct Idea support and matching trim components. It is not a standalone weatherproof switch for direct mounting into an exposed panel opening.\u003c\/p\u003e\u003cp\u003eFor boat refits, it makes the most sense where the vessel already uses Vimar Idea hardware or where the panel is being built around that modular system. Because the protection level is IP40, it belongs in protected interior spaces such as cabin panels, enclosed service lockers, or sheltered bulkheads rather than areas that see washdowns or direct spray.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe contact format matters before ordering. A normally closed push button behaves differently from the more common normally open style, so the circuit needs to be set up for a break-contact input. That is especially important when replacing an existing push button in a control circuit that relies on NC operation.\u003c\/p\u003e\u003cp\u003eThe 250 V~ rating points to mains AC switching duties rather than typical 12 V or 24 V DC helm switching. It is a good match for buyers who need a Vimar Idea insert with a plain front, a label field, and momentary NC operation in a protected onboard location.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray","offer_id":51550705385718,"sku":"APL927396-V8","price":30.5,"currency_code":"USD","in_stock":true},{"title":"Ivory","offer_id":51550705418486,"sku":"APL927396-V4","price":31.71,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364148_apl302102_jpeg.jpg?v=1787798663"},{"product_id":"apl142836","title":"Vimar IDEA Dimmer, For Capacitive Electronic Transformers, 230V, 40-300VA, MOSFET","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar IDEA Series is a flush-mounted dimmer for 230 V~ 50 Hz lighting circuits that use 40 to 300 VA capacitive-response electronic transformers. It uses MOSFET control and can be operated from the built-in control point or from peripheral NO push buttons, which is useful when a cabin or passageway light needs dimming from more than one location.\u003c\/p\u003e\u003cp\u003eThe front is visible in the dark, which helps when lights are turned down for night running or overnight use on board. This unit is flush-mounted and has a 54.10 mm device depth, so it should be matched to the available box depth and the existing IDEA installation layout before ordering.\u003c\/p\u003e\u003cp\u003eThis dimmer is a good match for boats that already use Vimar IDEA devices in the accommodation areas and need 230V AC light control rather than 12V or 24V DC switching. It fits naturally into interior spaces such as cabins, saloons, and companionway access points where controlled light levels matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e230 V~ 50 Hz dimmer for loads from 40 to 300 VA with capacitive-response electronic transformers\u003c\/li\u003e\n\u003cli\u003eMOSFET dimming control for regulated adjustment of compatible transformer-fed lighting\u003c\/li\u003e\n\u003cli\u003eWorks from the built-in control point or from peripheral NO push buttons\u003c\/li\u003e\n\u003cli\u003eVisible-in-dark front makes the control easier to find when ambient light is low\u003c\/li\u003e\n\u003cli\u003eFlush-mounted body with 54.10 mm device depth for IDEA series installations\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with a matte untreated finish\u003c\/li\u003e\n\u003cli\u003eAvailable in grey or white to match surrounding IDEA devices and trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis dimmer is offered in two color configurations within the IDEA range.\u003c\/p\u003e\u003cp\u003eThe electrical function stays the same across both versions, including 230 V~ 50 Hz supply, 40 to 300 VA load range, MOSFET control, and operation from built-in or peripheral NO push buttons. The change between variants is the front color.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16602: Grey. This version suits darker switch panels and interior trims that already use the grey IDEA finish.\u003c\/li\u003e\n\u003cli\u003eVM16602.B: White. This version keeps the same dimming function with a lighter face for white IDEA plates and lighter interior panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis unit is intended for flush installation in an IDEA-compatible setup. Before fitting it on board, confirm that the circuit is 230 V~ 50 Hz, that the connected load uses compatible capacitive-response electronic transformers, and that the enclosure depth can accept a 54.10 mm device.\u003c\/p\u003e\u003cp\u003eOn refit projects, this is most useful where the vessel already has Vimar IDEA wiring accessories and the goal is to add dimming without changing the surrounding look. For marine use, it is best placed in interior locations where the control is protected from direct spray and washdown.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"White","offer_id":51550707712246,"sku":"APL142836-8","price":104.5,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":51550707745014,"sku":"APL142836-5","price":114.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0827694_apl142836.jpg?v=1787798810"},{"product_id":"apl385913","title":"Vimar Surface Mounting Box, 3-Module, For Eikon\/Idea\/Plana, 35\/45 mm Depth, IP20","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar 09983 is a 3-module surface mounting box used to install Vimar Eikon, Idea, and Plana devices when you need an on-surface enclosure instead of cutting into a bulkhead or panel. It is commonly used for tidy switch and socket installations in cabins, nav stations, inside consoles, and other protected interior areas on board.\u003c\/p\u003e\u003cp\u003eThe box is IP20 and not weatherproof, so it belongs in dry locations out of direct spray. Physical size is 87.10 mm by 122.10 mm with an overall depth of 46.00 mm, and it is built around a 35\/45 mm depth format for the device stack.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module surface mounting box for Vimar Eikon, Idea, and Plana wiring devices\u003c\/li\u003e\n\u003cli\u003eIP20 enclosure for interior, dry installations\u003c\/li\u003e\n\u003cli\u003eFootprint 87.10 mm x 122.10 mm with 46.00 mm overall depth\u003c\/li\u003e\n\u003cli\u003eFour inlets plus rear entry for cable or conduit routing\u003c\/li\u003e\n\u003cli\u003eAccepts 20 mm or 25 mm conduit\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with screwed cover attachment\u003c\/li\u003e\n\u003cli\u003eRated insulation voltage Ui 450 V and operating temperature 0 to 60 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis mounting box is offered in multiple color options to match surrounding trim and Vimar plate finishes.\u003c\/p\u003e\u003cp\u003eColor is what changes between the variants. Module capacity, form factor, and core ratings such as IP20 remain the same.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM09983.01: Color White. A clean look for light headliners, liners, and bright interior joinery.\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eVM09983: Color Grey. A neutral finish that blends with many modern interior panels and helm consoles.\u003c\/li\u003e\n\u003cli\u003e\u003cbr\u003e\u003c\/li\u003e\n\u003cli\u003eVM09983.N: Color Silver. A metallic tone that pairs well with stainless hardware and darker instrument surrounds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for Vimar Eikon, Idea, and Plana devices in a 3-module layout. For Eikon installations, it is suitable only with Eikon Chrome cover plates.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the device series, module count, and the space available behind and around the planned mounting location. The box sits proud of the surface, which helps when you need extra room for cable bends and terminations without opening up the structure behind the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and routing notes\u003c\/h6\u003e\u003cp\u003eMount the enclosure to a flat, solid surface and plan cable entry from the rear or side inlets based on how your harness is run. Where you use conduit, size the run for 20 mm or 25 mm so the entry aligns cleanly and the conductors are protected from chafe.\u003c\/p\u003e\u003cp\u003eBecause the enclosure is not sealable and is not meant for wet areas, keep it inside the accommodation or within protected cabinetry. If the location can see washdowns, salt spray, or heavy condensation, move the installation to a drier space or use an additional weather-rated enclosure upstream.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits and new builds that use Vimar modular devices and need a neat surface-mounted solution where recess mounting is not practical. It also works well when you are adding controls to bulkheads, liners, or furniture panels and want a consistent look across the cabin.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Grey","offer_id":51550714822902,"sku":"APL385913-V7","price":13.25,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":51550714855670,"sku":"APL385913-V4","price":13.77,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":51550714888438,"sku":"APL385913-V2","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0364030_apl385913_jpeg.jpg?v=1787799208"},{"product_id":"apl985003","title":"Vimar Plana 1P 10AX 2-Way Switch Mechanism, For 1-3 Module Button, 250V, LED-Illuminable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14004.0 is a Plana series 1P 10AX 2-way switch mechanism rated 250 V~ for controlling an AC circuit from one or two locations, depending on how it is wired.\u003c\/p\u003e\u003cp\u003eIt is a modular insert that is completed with a Plana 1, 2, or 3-module button and can be made lightable with an optional plug-in LED unit. The mechanism uses screw terminals and is specified for IP40, so it belongs in interior areas that stay protected from spray and washdowns.\u003c\/p\u003e\u003cp\u003eFor tight switch panels, the body is 22.30 mm wide x 49.00 mm high, with 38.40 mm overall depth and a 24.00 mm built-in depth.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle-pole 2-way (SPDT) switching mechanism, rated 10AX at 250 V~.\u003c\/li\u003e\n\u003cli\u003eLightable function for control or orientation lighting using an exchangeable LED unit.\u003c\/li\u003e\n\u003cli\u003eBuilt to complete with Plana 1-, 2-, or 3-module buttons, keeping a consistent modular layout.\u003c\/li\u003e\n\u003cli\u003eScrew terminal connections for conventional wiring.\u003c\/li\u003e\n\u003cli\u003eIP40 rating for locations that stay dry and protected inside the boat.\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free.\u003c\/li\u003e\n\u003cli\u003eMaximum 100 W for self-ballasted lamps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis listing is for the switch mechanism. It installs as a 1-module flush-mounted device with snap-in fastening and is finished by adding a compatible Plana button.\u003c\/p\u003e\u003cp\u003eUse the stated depths when planning installation in shallow bulkheads or behind a helm side panel where wiring looms and conduits take up space.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThis is a 250 V~ rated mechanism, so treat it as part of the vessel's AC system and wire it with power isolated. Land conductors in the screw terminals per your vessel’s wiring standards and local electrical requirements.\u003c\/p\u003e\u003cp\u003eIf you add the optional illumination, the LED unit can be selected to suit either a 12-24 V supply or a mains-voltage pilot-light circuit, depending on how the switch location is fed.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eCommon placements include interior switch groups for saloon or galley circuits on AC power, utility areas, and refits where an existing Plana mechanism needs replacement without changing the surrounding modular layout.\u003c\/p\u003e\u003cp\u003eWith IP40 protection, keep it in cabins and other sheltered spaces, or mount it behind appropriate protection when the switch location is close to spray.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550714986742,"sku":"APL985003","price":7.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0826945_apl-75p-9pg-pch.jpg?v=1787799215"},{"product_id":"apl151346","title":"Vimar Isoset 4-Module Surface Mounting Box, For Eikon and Plana Series, IP40, Grey, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14804 is a 4-module surface-mount enclosure for installing Vimar Eikon and Plana modular devices when you cannot recess a box into the bulkhead or panel. It is rated IP40, so it belongs in protected interior locations on board where it will not see spray or washdowns.\u003c\/p\u003e\u003cp\u003eThe enclosure measures 13.6 x 8.3 x 5.5 cm and adds the space you need behind the device for terminations and cable routing. The body is plastic and includes full insulating components, which helps keep the back of the installation separated from the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module surface enclosure sized for Vimar Eikon and Plana modular plates and mechanisms\u003c\/li\u003e\n\u003cli\u003eIP40 rating for dry, protected interior mounting areas\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with full insulating components for safer surface mounting\u003c\/li\u003e\n\u003cli\u003eGrey finish that blends with most helm and cabin panels\u003c\/li\u003e\n\u003cli\u003eOverall size: 13.6 x 8.3 x 5.5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eModule counts follow the Vimar standard. Confirm your switch, socket, or control and its cover plate are a 4-module format within the Eikon or Plana family. This is the surface enclosure only, so the mechanism and cover plate are selected separately to match your circuit and layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFasten the enclosure to a flat surface, route the cable, then terminate the modular device and fit the cover plate. On boats, secure wiring so vibration does not work the terminals loose, and leave enough slack to service the connections later. If the mounting spot is likely to get damp, move the installation to a more sheltered area or use an enclosure with a higher ingress rating.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure works well for refits where you are adding a switch point at the nav station, bringing power to a workshop locker, or relocating controls onto a fiberglass or wood panel without cutting a recess. It also helps keep a consistent look when you are standardizing on Vimar Eikon or Plana hardware across the boat.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":51550716231926,"sku":"APL151346","price":8.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0353590_apl151346_jpeg.jpg?v=1787799298"}],"url":"https:\/\/www.apollolighting.com\/collections\/cat-vimar-switches.oembed","provider":"Apollo Lighting","version":"1.0","type":"link"}