{"product_id":"apl150282","title":"Hella Marine LED Recess Strip Lamp, 12V, White LED, Wide Rim, 265mm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 959073001 is a white LED recess strip courtesy lamp for 12V DC systems, built with a wide rim for a tidy flush finish. It draws under 2.0W (under 0.16A at 12V), so it can stay on for dockside or night moves without putting much load on the house bank.\u003c\/p\u003e\u003cp\u003eThis strip format is a practical fit for steps, toe-kicks, companionways, lockers, and other spots where you want light close to the deck. The lamp comes pre-wired with 2.5 m of cable, which helps when the nearest bus bar or switch panel is not right behind the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12V DC white LED strip lamp with power draw under 2.0W (under 0.16A at 12V)\u003c\/li\u003e\n\u003cli\u003eTwo-hole recess mount with a wide rim and screw caps for a clean finished look\u003c\/li\u003e\n\u003cli\u003eMounting footprint: 265 mm overall length, 33 mm overall width, 237.5 mm mounting hole centres\u003c\/li\u003e\n\u003cli\u003eCut-out size: 217 mm x 20 mm, with about 29 mm clearance needed behind the panel\u003c\/li\u003e\n\u003cli\u003eIP6K7 and IP6K9K protection for dust, temporary immersion, and high-pressure washdowns\u003c\/li\u003e\n\u003cli\u003ePre-wired with 2.5 m cable and reverse polarity protection for easier installs\u003c\/li\u003e\n\u003cli\u003ePMMA lens material for resistance to UV exposure and common cleaning chemicals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003ePlan the cut-out (217 mm x 20 mm) and confirm you have room behind the mounting surface for the lamp body (about 29 mm). The wide rim covers the edge of the cut-out, then the lamp secures with two screws on 237.5 mm centres. Avoid over-tightening the mounting screws into the lens area.\u003c\/p\u003e\u003ch6\u003eElectrical and wiring notes\u003c\/h6\u003e\u003cp\u003eThis lamp is polarity conscious. Connect the cable with the red stripe to positive (+) and the black cable to negative (-). Protect the circuit with a fuse rated at 2A maximum.\u003c\/p\u003e\u003cp\u003eLight output reduces as input voltage is lowered, which works well with analogue dimming approaches that drop DC input. For 12V installations, avoid continuous supply voltage above 16V.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis style of strip lamp suits boats that need low-glare courtesy lighting along steps, under-gunwale storage, or around the cockpit and cabin where you want visibility without flooding the space with light. It is a good match for owners running long wire routes who still want a clean recessed install and sealed protection for wet areas.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 lamp with 2.5 m cable\u003c\/li\u003e\n\u003cli\u003e2 black stainless steel screws\u003c\/li\u003e\n\u003cli\u003e2 screw caps\u003c\/li\u003e\n\u003cli\u003e2 cable connectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":51553922711798,"sku":"APL150282","price":93.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0371816_apl150282_jpeg.jpg?v=1787825207","url":"https:\/\/www.apollolighting.com\/products\/apl150282","provider":"Apollo Lighting","version":"1.0","type":"link"}