{"product_id":"apl217512","title":"Garmin GWS 10 Replacement Anemometer Wind Cups","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11119-00 is a replacement anemometer wind cup assembly for the Garmin GWS 10 wind sensor. It restores proper wind speed pickup when the original cups are worn, damaged, or no longer spinning freely after years of UV, salt spray, and vibration at the masthead.\u003c\/p\u003e\u003cp\u003eThis is the rotating cup component only, so it addresses the mechanical side of wind speed measurement without changing any wiring or network connections on the boat. Once installed, wind speed data continues to be sent through the existing GWS 10 sensor to your connected display or chartplotter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit replacement wind cups for Garmin GWS 10 wind sensors\u003c\/li\u003e\n\u003cli\u003eRestores wind speed readings when the original cups are cracked, missing, or binding\u003c\/li\u003e\n\u003cli\u003eMechanical replacement part that does not require changes to cabling, power, or network hardware\u003c\/li\u003e\n\u003cli\u003eCompact masthead component that keeps the wind sensor profile unchanged\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eFit is specific to the Garmin GWS 10 wind sensor. If your current masthead unit is a GWS 10, this replacement matches the wind cup assembly used for wind speed measurement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan to do this work with the wind sensor safely down on deck rather than aloft. The wind cup assembly mates to the anemometer shaft in a keyed orientation, then presses into place until it is fully seated.\u003c\/p\u003e\u003cp\u003eAfter installation, spin the cups by hand to confirm smooth, free rotation. Once the sensor is back on the mast, verify that wind speed readings look reasonable at the dock and under way.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eAccurate wind speed is a practical tool for sail trim, autopilot behavior under sail, and keeping an eye on changing conditions during coastal runs or offshore passages. This replacement makes the most sense for boats already relying on a GWS 10 for wind data and looking to bring the masthead sensor back to normal function without replacing the full transducer.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the cups with fresh water after heavy salt exposure and check them periodically for cracks, stiffness, or wobble. Keeping the rotating parts clean and freely spinning helps maintain consistent wind speed readings season after season.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554011021558,"sku":"APL217512","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694274_apl217512_jpeg.jpg?v=1787826478","url":"https:\/\/www.apollolighting.com\/products\/apl217512","provider":"Apollo Lighting","version":"1.0","type":"link"}