{"product_id":"apl304827","title":"Hella Marine 4-Way Compact Switch Panel, 12V, Fused, Spray Proof, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 358114281 is a compact 4-gang switch panel for controlling four 12V DC circuits from one spot at the helm. It is rated for a 20A maximum load and keeps wiring tidy on smaller consoles where space behind the dash is limited.\u003c\/p\u003e\u003cp\u003eThe toggles are protected with neoprene rubber boots for splash exposure, and each circuit is fused with in-line spade type fuses located behind the panel. The gray housing is made from impact resistant, UV stabilized plastic, and the panel measures 95 x 107 x 55 mm (H x W x D).\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFour OFF-ON toggle switches for running four separate onboard circuits\u003c\/li\u003e\n\u003cli\u003eFor 12V DC systems with a 20A maximum load\u003c\/li\u003e\n\u003cli\u003eSplash-proof toggle boots and spray-proof in-line fuse holders behind the panel\u003c\/li\u003e\n\u003cli\u003eUses in-line spade type fuses for each circuit\u003c\/li\u003e\n\u003cli\u003ePre-wired panel to speed up installation and reduce clutter behind the dash\u003c\/li\u003e\n\u003cli\u003eOverall size: 95 x 107 x 55 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003eGray, impact resistant plastic housing that is UV stabilized\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the panel to a flat surface on the dash, console, or cabin bulkhead using the supplied gasket and fasteners. Leave enough clearance behind the mounting surface for wiring bends and for accessing the in-line fuse holders.\u003c\/p\u003e\u003cp\u003eRoute wiring so it is supported and protected from chafe, and finish connections with marine-grade crimp terminals and heat shrink. Label each switch so anyone on board can tell what is being powered at a glance.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis panel is intended for 12V DC circuits. Feed the panel from a properly protected 12V supply, then run each switched output to the accessory being controlled. Keep grounds and returns organized on a bus bar, and match wire gauge to the load and run length for the circuit.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of panel is a straightforward fit for boats that need a simple four-circuit control point, such as center consoles, small cruisers, skiffs, and workboats. Common circuits include navigation and deck lights, pumps, bilge blowers, and other 12V accessories that you want to isolate on separate switches.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-gang switch panel assembly\u003c\/li\u003e\n\u003cli\u003eMounting gasket\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003cli\u003eLabel set\u003c\/li\u003e\n\u003cli\u003eInstallation template\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that wiring connections stay tight and free of corrosion, especially on boats that see vibration or salt exposure. Inspect the switch boots and the fuse area behind the panel during routine electrical checks, and replace any fuses only after confirming the circuit load and wiring are appropriate.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":51558263259382,"sku":"APL304827","price":105.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280532_apl299457.webp?v=1787827856","url":"https:\/\/www.apollolighting.com\/products\/apl304827","provider":"Apollo Lighting","version":"1.0","type":"link"}