{"product_id":"apl337711","title":"TACO Marine Neptune Premium Leaning Post, For Boats up to 30 ft, 33-1\/2 x 39 x 27 in, 15-1\/2 x 35 in Footprint, 4 Flush-Mount Rod Holders, Folding Footrest, 72qt Cooler Storage","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine L10-1001-1 is a Neptune Premium Leaning Post for center console boats up to 30' long, built to add secure helm seating, rod storage, and cooler storage without taking over the cockpit. Its footprint is 15-1\/2\" by 35\", with listed dimensions of 33-1\/2\" A, 39\" B, and 27\" C, which helps when checking deck space, console clearance, and walking room around the helm.\u003c\/p\u003e\u003cp\u003eThis leaning post suits small to medium center consoles used for fishing, cruising, and day trips where the helm area needs more support than a simple cooler seat. It includes a removable fiberglass storage tray, four flush-mounted aluminum rod holders, a folding footrest, a wrap-around grab rail, and space for a 72-quart cooler secured with an included strap.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits center console boats up to 30' long, with a 15-1\/2\" by 35\" deck footprint for layout planning.\u003c\/li\u003e\n\u003cli\u003eFour flush-mounted aluminum rod holders keep rods close to the helm and are installed at 0 degree.\u003c\/li\u003e\n\u003cli\u003eRemovable fiberglass storage tray gives quick access to tackle, tools, dock lines, or small loose gear.\u003c\/li\u003e\n\u003cli\u003eStorage area holds a 72-quart cooler and uses an included strap to keep it in place while underway.\u003c\/li\u003e\n\u003cli\u003eFolding footrest supports a more secure stance at the helm and can be moved out of the way when needed.\u003c\/li\u003e\n\u003cli\u003eWrap-around grab rail gives the operator and passengers a handhold when the boat is moving through chop.\u003c\/li\u003e\n\u003cli\u003eHand-laid fiberglass deck, aluminum frame, aluminum seat hinges, and marine pipe construction support regular use in a saltwater cockpit.\u003c\/li\u003e\n\u003cli\u003eMildew, fungus, and UV-resistant marine vinyl fabric helps the seat hold up to sun exposure and wet gear.\u003c\/li\u003e\n\u003cli\u003eContinuous flat bar mounting pads spread the load across the deck and support a secure installation.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore drilling, check the 15-1\/2\" by 35\" footprint against the console, deck hatches, fuel fills, battery access, and any existing rigging under the deck. The continuous flat bar mounting pads need a solid mounting surface, and backing plates or suitable reinforcement may be needed depending on the deck structure.\u003c\/p\u003e\u003cp\u003eThe 33-1\/2\", 39\", and 27\" listed dimensions should be compared with helm height, sightline over the console, and clearance around the wheel or controls. On boats that run in rougher water, the grab rail and footrest are useful for staying braced without leaning on the console electronics or throttle area.\u003c\/p\u003e\u003ch6\u003eStorage and fishing use\u003c\/h6\u003e\u003cp\u003eThe four rod holders make this a practical upgrade for anglers who need rod access at the helm while keeping the cockpit organized. The under-seat tray is useful for smaller items that usually end up loose around the console, while the cooler bay keeps drinks, bait, or supplies tucked under the seat instead of sliding across the deck.\u003c\/p\u003e\u003cp\u003eThis setup is a good match for center console owners who want a cleaner helm station for coastal fishing, sandbar runs, and everyday cruising, especially when deck space is limited but seating, handholds, and organized storage still matter.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe aluminum frame has a hand-polished mirror finish and is anodized after fabrication, including the welded areas, which helps with salt exposure around bends and joints. The fiberglass deck and marine vinyl should be rinsed after saltwater use, and the mounting hardware and rod holders should be checked periodically for movement, corrosion, or trapped grit.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":51558881165558,"sku":"APL337711","price":3198.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1323780_apl337711.png?v=1787909768","url":"https:\/\/www.apollolighting.com\/products\/apl337711","provider":"Apollo Lighting","version":"1.0","type":"link"}