{"product_id":"apl342683","title":"Lumishore ECLIPSE DL55 LED Downlight, RGBW, 12V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04540-00 is a 12 V DC recessed downlight with white light plus RGB color, built for overhead mounting in interior and exterior areas on a boat.\u003c\/p\u003e\u003cp\u003eIt runs on 10 to 15 V DC and draws up to 0.4 A, so it fits cleanly on typical 12 V lighting circuits. The sealed front is rated IP67 for spray and routine washdowns.\u003c\/p\u003e\u003cp\u003eFor fit planning, the bezel measures 64.0 mm (2.519 in) and the cutout is 50.8 mm (2.0 in). The body depth is about 21 mm (0.83 in), which helps when headliner or hardtop space is tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 V DC only (10 to 15 V DC) with max current draw of 0.4 A\u003c\/li\u003e\n\u003cli\u003eWhite light plus RGB color output for general lighting and accent scenes\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealed front for wet areas and frequent washdowns\u003c\/li\u003e\n\u003cli\u003eLow depth around 21 mm (0.83 in) for thin panels and tight overhead cavities\u003c\/li\u003e\n\u003cli\u003e64.0 mm (2.519 in) bezel with a 50.8 mm (2.0 in) cutout\u003c\/li\u003e\n\u003cli\u003eTwo-wire hookup with spring-clip retention for a clean, flush install\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis downlight is for 12 V DC systems only. If your boat is primarily 24 V, plan on a proper 12 V feed or a converter that can hold the supply in the 10 to 15 V DC range under load.\u003c\/p\u003e\u003cp\u003eCheck the 2.0 in (50.8 mm) cutout and confirm you have about 0.83 in (21 mm) of clearance behind the panel for the light body and wiring bend radius.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIt mounts as a recessed fixture using spring clips, so the usual workflow is to mark the location, cut a 2.0 in (50.8 mm) hole, then feed the two conductors through before seating the light into place until the bezel sits flush.\u003c\/p\u003e\u003cp\u003eOn cored panels or any overhead area that can get wet, sealing the cut edge of the hole helps keep moisture out of the laminate and prevents swelling around the opening over time.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003eWiring is a simple two-wire connection. Protect the circuit with an appropriately sized fuse or breaker for the wiring and total lighting load, and keep connections crimped, sealed, and supported so vibration does not work them loose.\u003c\/p\u003e\u003cp\u003eBasic on and off control works from a standard switch. RGB color selection and scene control require a compatible controller when you want more than simple on and off behavior.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style of low-profile downlight makes sense for cabin headliners, companionway overheads, hardtops, and cockpit overhangs where you want one fixture that can handle white light for tasks and RGB for ambience.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats with 12 V lighting circuits that need an overhead light in a damp area and still want color options without taking up much depth behind the panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater runs, a quick fresh-water rinse around the bezel helps keep deposits from building up. Avoid harsh solvents on the lens, and re-check wiring support if the fixture has been removed for access behind the panel.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":51557524439286,"sku":"APL342683","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1281127_apl342683.jpg?v=1787878026","url":"https:\/\/www.apollolighting.com\/products\/apl342683","provider":"Apollo Lighting","version":"1.0","type":"link"}