{"product_id":"apl489335","title":"Imtra Flexible LED Strip Tape, 12V DC, 4 ft, Red Light, IP65","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Imtra ILLT-RE-12V-4 is a flexible LED strip tape that produces red illumination along a 4-foot length. Operating on 12V DC with an IP65 ingress protection rating, this standard-output strip provides linear lighting for interior marine applications where a conventional light fixture may be too large or difficult to position.\u003c\/p\u003e\u003cp\u003eThe strip uses closely spaced surface-mount LEDs enclosed in a flexible, clear epoxy covering for continuous light distribution. Its low-profile construction follows mounting contours, while pre-attached 3M double-sided adhesive tape and integrated wire leads simplify installation and connection to a suitable DC power source.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e12V DC operating voltage for compatible low-voltage electrical systems.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e4-foot flexible LED strip with red light output.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP65-rated construction for protection against dust and water jets.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow-profile design with a clear epoxy covering.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWide-angle surface-mount LEDs for distributed linear illumination.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-attached 3M double-sided adhesive tape for surface mounting.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePre-wired positive and negative leads for direct DC electrical connection.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCan be shortened at designated cutting points spaced every 2 inches.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe strip mounts to a clean, dry surface using its integrated adhesive backing. Its flexible construction accommodates curved mounting paths, making it suitable for concealed lighting along interior trim, cabinets, and similar surfaces. When a shorter section is required, the tape can be trimmed at its marked 2-inch cutting intervals without cutting through the LED components.\u003c\/p\u003e\u003cp\u003eElectrical installation requires a compatible 12V DC supply and correct polarity at the positive and negative wire leads. The strip operates best with regulated voltage, as excessive voltage and electrical transients can damage the LEDs. A voltage stabilizer or power conditioner is recommended where the vessel's DC supply experiences significant fluctuations.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe red illumination supports interior courtesy lighting, cove lighting, and accent lighting in cabins, lockers, and other protected areas. Its narrow profile allows placement along edges and recessed surfaces where traditional rope lights or rigid fixtures may not fit. The IP65 rating provides resistance to moisture exposure, but the standard epoxy-covered construction is intended primarily for interior installations rather than continuously exposed exterior locations.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eILLT-RE-12V-4\u003c\/span\u003e","brand":"Imtra","offers":[{"title":"Default Title","offer_id":52063279317238,"sku":"APL489335","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/Glowing_Red_LED_Reel_on_White-optimized.webp?v=1793200077","url":"https:\/\/www.apollolighting.com\/products\/apl489335","provider":"Apollo Lighting","version":"1.0","type":"link"}