{"product_id":"apl528928","title":"Garmin B60-12 Thru-Hull Transducer, Bronze, 600W, 50\/200 kHz, 6-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10982-01 is a B60-12 tilted-element through-hull transducer with a 6-pin connector for compatible Garmin sounders. It runs traditional dual-frequency sonar at 50\/200 kHz with 600 W RMS output, and it reports both depth and water temperature.\u003c\/p\u003e\u003cp\u003eThe ceramic element is fixed at a 12° angle inside the housing so the sonar beam stays aimed closer to vertical on hull sections with deadrise. This version is intended for deadrise angles in the 8° to 15° range, which helps you avoid the added drag and install complexity of a fairing block.\u003c\/p\u003e\u003cp\u003eFor planning the install, the housing sits nearly flush with about 5 mm (0.19 in) extending below the hull. The cap is roughly 84 mm (3.30 in) in diameter, and the installation calls for a 60 mm (2.375 in) hull cutout.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e50\/200 kHz traditional dual-frequency sonar with 600 W RMS output\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12° tilted element to suit 8° to 15° hull deadrise while keeping the beam aimed down\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBronze through-hull body with a low-profile shape and about 5 mm (0.19 in) protrusion below the hull\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBeamwidths: 45° at 50 kHz and 12° at 200 kHz\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBuilt-in temperature sensor for water temperature readout\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e60 mm (2.375 in) hull cutout requirement for the thru-hull installation\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e6-pin connector for Garmin sounders that use the 6-pin transducer port\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis transducer is meant for installs where the local hull deadrise at the mounting point falls in the 8° to 15° range. It is a 50\/200 kHz, 600 W traditional sonar transducer with a Garmin 6-pin connector, so your sounder needs to support those frequencies and that connector style.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAs a thru-hull transducer, installation involves drilling a 60 mm (2.375 in) hole and sealing the housing to the hull with an appropriate marine sealant. Choose a location that stays in clean, aeration-free water underway, and confirm you have adequate inside-hull clearance for the stem, nut, and cable routing. During final alignment, orient the cap so its arrow points toward the keel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis style of low-profile, tilted-element transducer is commonly used on center consoles and boats that are trailered, where you want depth and temperature data without a tall fairing block. It is a practical match for coastal cruising, inshore fishing, and general sounder use where 50 kHz is helpful for wider coverage and 200 kHz is helpful for a tighter beam.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the face clean for consistent returns, especially after extended time in the water. If antifouling is needed, use a coating intended for transducer faces and apply it carefully so the acoustic window stays smooth and free of buildup.\u003c\/p\u003e\u003ch6\u003eSafety information\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51558584811766,"sku":"APL528928","price":390.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694077_apl528928_jpeg.jpg?v=1792624054","url":"https:\/\/www.apollolighting.com\/products\/apl528928","provider":"Apollo Lighting","version":"1.0","type":"link"}