{"product_id":"apl582235","title":"Imtra F-Series High Output LED Strip Tape, 16 ft, IP66, 3M Tape","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Imtra F-Series is a high-output flexible LED strip tape for linear lighting in marine interior and exterior installations. Supplied in a 16 ft (5 m) reel, it features clear silicone encapsulation with an IP66 ingress protection rating and UV-resistant properties that help prevent yellowing and hardening over time. Its flexible profile accommodates cove lighting, courtesy lighting, under-gunwale installations, and other areas requiring continuous illumination.\u003c\/p\u003e\u003cp\u003eThe strip operates on low-voltage DC power and uses 2.2 watts per foot, with a 120° viewing angle and 10 LEDs per foot. Self-adhesive 3M backing simplifies surface mounting, while prewired leads at both ends of the full reel allow connection to a suitable DC power source.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eHigh-output LED strip with a 16 ft (5 m) maximum run.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIP66 protection against dust and powerful water jets.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eClear silicone encapsulation with UV-resistant properties.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2.2W per foot power consumption.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e120° viewing angle with 10 LEDs per foot.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e0.50 in wide and 0.25 in high flexible profile.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e3M self-adhesive backing for surface mounting.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePrewired DC connection leads at both ends of the full reel.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe F-Series High Output LED Strip Tape is available in five configurations distinguished by LED output color and input voltage.\u003c\/p\u003e\u003cp\u003eOutput color determines the appearance of the illumination, while input voltage determines the required DC electrical supply. All five configurations retain the same 16 ft length, IP66 protection, silicone encapsulation, and adhesive mounting system.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eILLT-CW-12V-16F: Cool White output color, 12V DC input. Provides cool white illumination for 12V DC installations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eILLT-CW-24V-16F: Cool White output color, 24V DC input. Provides cool white illumination for 24V DC installations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eILLT-WW-12V-16F: Warm White output color, 12V DC input. Provides warm white illumination for 12V DC installations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eILLT-WW-24V-16F: Warm White output color, 24V DC input. Provides warm white illumination for 24V DC installations.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eILLT-BL-12V-16F: Blue output color, 12V DC input. Provides blue illumination for 12V DC installations.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe strip mounts directly to a clean, dry surface using its integrated 3M adhesive backing. For installations requiring additional mechanical retention, compatible F-Series aluminum channel clips are available separately.\u003c\/p\u003e\u003cp\u003eThe tape can be shortened at designated cutting points, spaced every 4 in (102 mm) on 12V models and every 6.5 in (165 mm) on 24V models. Cut ends must be sealed with a compatible F-Series end cap and silicone to maintain protection against moisture. End caps are available separately.\u003c\/p\u003e\u003ch6\u003eElectrical requirements\u003c\/h6\u003e\u003cp\u003eThe strip requires a regulated DC supply matched to the selected voltage. It is sensitive to overvoltage and transient spikes, so a voltage stabilizer or power conditioner is recommended when connecting to a boat's DC electrical system. Parallel wiring is recommended rather than connecting multiple strips in series.\u003c\/p\u003e\u003cp\u003eConnections must observe the marked positive and negative polarity. For installations exposed to moisture, use suitable electrical connectors and heat-shrink protection at the wiring connections.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eILLT-BL-12V-16F\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eILLT-CW-12V-16F\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eILLT-CW-24V-16F\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eILLT-WW-12V-16F\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eILLT-WW-24V-16F\u003c\/span\u003e","brand":"Imtra","offers":[{"title":"Blue \/ 12V","offer_id":52063269421302,"sku":"APL582235-V5","price":176.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ 12V","offer_id":52063269454070,"sku":"APL582235-V1","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Cool White \/ 24V","offer_id":52063269486838,"sku":"APL582235-V2","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ 12V","offer_id":52063269519606,"sku":"APL582235-V3","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Warm White \/ 24V","offer_id":52063269552374,"sku":"APL582235-V4","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/ChatGPT_Image_Oct_19_2026_10_07_52_PM-3-optimized.webp?v=1793199952","url":"https:\/\/www.apollolighting.com\/products\/apl582235","provider":"Apollo Lighting","version":"1.0","type":"link"}