{"product_id":"apl646459","title":"Garmin gWind Race\/nWind Connector Adapter Cable Bundle, For Nexus Network, Includes gWind Race Transducer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-01403-10 is a gWind Race and nWind connector adapter cable bundle for sailboats that already run a Nexus wind network. It lets you replace an older nWind masthead transducer with a gWind Race transducer while keeping your existing Nexus mast cable, so you can update the sensor without pulling a new cable through the spar.\u003c\/p\u003e\u003cp\u003eThe adapter cable bridges the connector change between nWind and gWind. The gWind Race sensor uses a three-bladed propeller and a twin-fin vane to read wind speed and angle, which helps when you are trying to hold steady numbers in lighter air.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Nexus owners replacing an nWind transducer with a gWind series sensor, using the existing Nexus mast cable.\u003c\/li\u003e\n\u003cli\u003eIncludes an nWind-to-gWind connector adapter cable to mate the new transducer to the legacy mast wiring.\u003c\/li\u003e\n\u003cli\u003egWind Race wind sensor uses a three-bladed propeller and a twin-fin vane for wind speed and angle readings.\u003c\/li\u003e\n\u003cli\u003eSupports a clean retrofit when you want to refresh a masthead sensor without re-running mast wiring.\u003c\/li\u003e\n\u003cli\u003ePropeller installation instructions are included for correct assembly after transport or service.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003egWind Race transducer\u003c\/li\u003e\n\u003cli\u003eConnector adapter cable\u003c\/li\u003e\n\u003cli\u003ePropeller installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bundle is intended for boats with an existing Nexus network that previously used an nWind wind transducer. It is a straightforward swap when your mast is already wired with the Nexus mast cable and you want to keep that cable in place.\u003c\/p\u003e\u003cp\u003eIf your boat does not have the Nexus mast cable or you are building a system from scratch, plan the network layout first so the connector style at the masthead matches the rest of your wind instrumentation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMost installs follow a simple path: remove the old nWind transducer, mount the gWind Race transducer in the same location, then connect the adapter cable between the transducer lead and the existing mast cable. Secure the connection so it is not carrying strain from mast movement, and protect the joint from spray and washdowns.\u003c\/p\u003e\u003cp\u003eAfter mounting, confirm vane alignment and check your instrument calibration on the water. Small alignment errors at the masthead show up quickly as persistent wind-angle offsets.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for performance cruisers and race crews who want to keep a proven Nexus instrument setup but replace a worn nWind sensor with the gWind Race style. It also helps when you are chasing intermittent wind readings caused by aging masthead connectors, since the adapter cable refreshes that interface.\u003c\/p\u003e\u003ch6\u003eSafety information\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51552236765430,"sku":"APL646459","price":1199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0694300_apl646459_jpeg.jpg?v=1787814235","url":"https:\/\/www.apollolighting.com\/products\/apl646459","provider":"Apollo Lighting","version":"1.0","type":"link"}