{"product_id":"apl654317","title":"Lumitec Kraken Command Center Dock Lighting Power \u0026 Control Box, 110-240VAC, IP67, Poco Module, Bluetooth\/WiFi","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101638 is a Kraken Command Center that powers and controls a Kraken dock lighting system from one weatherproof enclosure. It accepts 100 to 300VAC, 50\/60Hz input and provides 24VDC output for the connected lights, with a maximum 480W load rating for the system. The housing is IP67-rated and measures 15.25 in tall x 11 in wide x 5.4 in deep.\u003c\/p\u003e\u003cp\u003eThis unit includes a POCO digital lighting control module for wireless control from a connected smart device, so you can group lights and adjust color or intensity when used with PLI-compatible fixtures. It is built to run up to six Kraken underwater lights (sold separately) and can also be used as the hub for a mixed layout that includes Nautilus piling lights and Scallop pathway lights.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIntegrated command center with built-in 24VDC power output and a 480W maximum system load rating\u003c\/li\u003e\n\u003cli\u003eSupports up to six Kraken underwater lights on a single command center\u003c\/li\u003e\n\u003cli\u003ePOCO control module included for wireless lighting control via Bluetooth and Wi-Fi\u003c\/li\u003e\n\u003cli\u003eFour digital control channel outputs plus a constant 24VDC bus for compatible lighting circuits\u003c\/li\u003e\n\u003cli\u003eIP67-rated grey plastic enclosure for outdoor dock environments, with an operating temperature range of -31°F to 131°F\u003c\/li\u003e\n\u003cli\u003eEnclosure dimensions: 15.25 in (H) x 11 in (W) x 5.4 in (D)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCommand center enclosure with integrated power supply\u003c\/li\u003e\n\u003cli\u003ePOCO digital lighting control module\u003c\/li\u003e\n\u003cli\u003eBus connectors\u003c\/li\u003e\n\u003cli\u003eFuses\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so every light cable can reach the enclosure without being stretched, pinched, or routed where boats can chafe it. The enclosure is intended for wet outdoor locations, but it should still be mounted to a solid structure with the cable entries pointing down to help shed water. Leave breathing room behind the enclosure for airflow and service access to breakers, fuses, and wiring.\u003c\/p\u003e\u003cp\u003eAll installer-made cable connections should be kept out of the water. In tidal areas, account for tidal swing so junction points stay well above the highest expected waterline.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis system uses high-voltage AC input and should be installed by a qualified person following applicable electrical codes. Feed it from a GFCI-protected circuit. The low-voltage side is 24VDC, and the command center is designed to be switched by a timer, photocell, or toggle switch upstream of the receptacle when needed. Do not put the command center on a dimmer.\u003c\/p\u003e\u003cp\u003eWhen distributing loads across channels, stay within the channel limits for the installation: channels 1 and 2 share a combined 10A limit, and channels 3 and 4 share a combined 10A limit. Keeping wiring runs protected from abrasion and strain is especially important under docks and around pilings.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe command center is meant for Kraken modular dock-light layouts and works with PLI-compatible Lumitec DC lighting circuits. It supports mixed systems that combine underwater lights with above-water pathway and piling fixtures, as long as the wiring is configured to match the fixture type and control method used in the system.\u003c\/p\u003e\u003ch6\u003eUse cases on the dock\u003c\/h6\u003e\u003cp\u003eThis setup makes sense for private docks, lifts, and marina slips where you want one enclosure to manage multiple lighting points rather than separate power supplies scattered around the dock. It is a good match for owners who want to organize lights into zones and control scenes from a phone or tablet while staying within a single centralized power and control hub.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that cable glands stay tight, wiring remains supported, and any exposed runs are not rubbing on hardware. Keep the enclosure closed and the sealing surfaces clean so the IP rating is maintained, and replace fuses only with the correct type and rating for the circuit.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":51555016605942,"sku":"APL654317","price":2239.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0362443_apl654317_jpeg.jpg?v=1787848304","url":"https:\/\/www.apollolighting.com\/products\/apl654317","provider":"Apollo Lighting","version":"1.0","type":"link"}