{"product_id":"apl807731","title":"Hella Marine MST6E LED Warning Flasher, Amber Light, 12-24V, IP67, 21 Flash Patterns","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 358111691 is an amber LED lighthead that mounts flat to add a highly visible warning signal on board. It runs on 12 or 24 VDC systems and is intended for exposed locations where spray, vibration, and daily use are normal.\u003c\/p\u003e\u003cp\u003eThis lighthead is 5.1 in (130 mm) long and uses a self-adhesive backing for quick mounting on a clean, flat surface. It has 21 selectable flash patterns, including steady-on, and it remembers the last pattern used when power is cycled.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAmber LED warning lighthead for surface mounting\u003c\/li\u003e\n\u003cli\u003eMulti-voltage input: 12 to 24 VDC\u003c\/li\u003e\n\u003cli\u003e21 selectable flash patterns, including steady-on\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive backing for fast, no-drill mounting on suitable surfaces\u003c\/li\u003e\n\u003cli\u003eNon-volatile memory recalls the last selected pattern after power-off\u003c\/li\u003e\n\u003cli\u003eMultiple units can be grouped for coordinated warning setups\u003c\/li\u003e\n\u003cli\u003eFrosted lens with a glowing body effect for wide-angle presence\u003c\/li\u003e\n\u003cli\u003eWeatherproof and vibration resistant for interior or exterior use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a signaling lighthead meant to be seen, not a cabin or courtesy light meant to illuminate a space. It fits both 12V and 24V DC electrical systems commonly found on center consoles, sportfishers, sailboats, and commercial craft.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount it on a smooth, solid area where the lens has a clear line of sight, such as a hardtop edge, cabin side, work deck structure, or equipment housing. Adhesive-backed lights depend on surface prep, so remove wax, salt film, and oils before mounting, and keep the wiring supported so vibration does not work the leads loose over time.\u003c\/p\u003e\u003cp\u003ePlan the circuit like any other on-board accessory: switch or controller placement, a properly sized fuse close to the power source, and a clean ground return. In multi-light setups, grouping lets several heads flash together for a more organized warning layout.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eA good match for skippers who run a workboat, tow, patrol, or dockside service role and want a dedicated amber warning signal on a 12V or 24V system. It also works well on tenders or utility platforms where you need quick visibility during low-speed operations around traffic, docks, or ramps.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and grime off the lens and housing during routine washdowns, and check wiring support points as part of your seasonal inspection. If you see reduced output, start by confirming solid power and ground connections before chasing controls or pattern settings.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":51558155419894,"sku":"APL807731","price":78.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/1280993_apl807731_jpeg.jpg?v=1787897942","url":"https:\/\/www.apollolighting.com\/products\/apl807731","provider":"Apollo Lighting","version":"1.0","type":"link"}