{"product_id":"apl847338","title":"Lumitec Capri3 Retrofit Kit, For Capri and Capri2, White Housing, Spring Clip Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101731 is a white retrofit housing kit that lets you mount a Capri3 flush-mount spreader or flood light in the existing recess from an earlier Capri or Capri2 light. It is meant for refits where you want the updated Capri3 mounting style while keeping the original cutout in your hardtop, tower, or arch.\u003c\/p\u003e\u003cp\u003eThe housing uses the same spring clip, clamp-in mounting style used by the Capri3 fixture, so the front face installs without exposed screws. Electrical performance is driven by the Capri3 light you pair it with, and Capri3 spreader lights run on 10-30 VDC for 12V and 24V systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRetrofit housing for installing a Capri3 flush-mount light into an existing Capri or Capri2 recess\u003c\/li\u003e\n\u003cli\u003eClamp-in, spring clip mounting style that keeps the face clean with no exposed fasteners\u003c\/li\u003e\n\u003cli\u003eWhite finish that blends in well on many hardtops, liners, and deck surfaces\u003c\/li\u003e\n\u003cli\u003eHelps avoid re-cutting or re-drilling when updating older Capri-series spreader and deck lights\u003c\/li\u003e\n\u003cli\u003eCovered by Lumitec limited warranty terms (5 years for products purchased on or after January 1, 2025)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis retrofit kit is for boats that already have the recess from older Lumitec Capri or Capri2 flush-mount lights. It is used as the retrofit housing when stepping up to a Capri3 flush-mount fixture, so confirm you are installing a Capri3 light in the same location and that your existing cutout matches the earlier Capri-style recess.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTypical install is a straightforward swap: remove the previous light, clean the recess, and check the wiring and sealing surface before bedding the housing as needed for your mounting area. The Capri3 light then seats into the retrofit housing and locks in with the Capri3 spring clips, which helps keep the installation tidy on a hardtop or tower where washdowns are common.\u003c\/p\u003e\u003cp\u003eAs with any exterior lighting on a boat, seal any disturbed penetrations to prevent water intrusion and keep wiring practices in line with ABYC guidance for circuit protection and connections.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis retrofit kit makes sense for owners doing a hardtop or tower refresh who want the Capri3 mounting style without reworking gelcoat around the cutout. It is a practical fit for coastal cruisers and fishing boats that rely on spreader lighting at the dock, at anchor, and during night rigging.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the area after saltwater use and check the bedding line during routine inspections, especially on towers that see vibration. If you ever pull the light for service, inspect and renew sealing where needed before reinstalling.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":51552799490294,"sku":"APL847338","price":7.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0370957_apl847338_jpeg.jpg?v=1787816616","url":"https:\/\/www.apollolighting.com\/products\/apl847338","provider":"Apollo Lighting","version":"1.0","type":"link"}