{"product_id":"apl906460","title":"Garmin Replacement Fairing Block, For GT21\/GT23\/GT41\/GT50\/GT51","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12224-01 is a replacement fairing block for Garmin GT21, GT23, GT41, GT50, and GT51 series of thru-hull scanning transducers. It sits between the transducer and the hull so the transducer face can be set parallel to the waterline, which helps scanning sonar read consistently while underway.\u003c\/p\u003e\u003cp\u003eIt is recommended when the deadrise angle at the mounting location exceeds 5 degrees. This part is commonly replaced during a haul-out if the original fairing block has been damaged, removed during a transducer swap, or needs to be re-fit after hull work.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCompatible with Garmin GT21, GT23, GT41, GT50, and GT51 series thru-hull scanning transducers\u003c\/li\u003e\n\u003cli\u003eHelps set the transducer face parallel to the waterline for steadier scanning sonar returns\u003c\/li\u003e\n\u003cli\u003eIntended for mounting locations with more than 5 degrees of deadrise\u003c\/li\u003e\n\u003cli\u003eReplacement fairing block for maintaining an existing thru-hull installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis fairing block is for the GT-series scanning transducers listed above in their thru-hull configuration. It is used on hulls where the transducer mounting surface is not close to flat and the transducer needs to be leveled relative to the waterline.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan to fit and install a fairing block during haul-out when you can access the outside of the hull. The fairing block is installed as part of the transducer's thru-hull stack-up; follow the transducer installation instructions for bedding, tightening, and final alignment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that run a deeper-V hull or have a mounting area where the deadrise exceeds 5 degrees, especially where clean scanning sonar matters for fishing, offshore runs, and higher-speed cruising.\u003c\/p\u003e\u003ch6\u003eRegulatory notice\u003c\/h6\u003e\u003cp\u003eWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e010-12224-01\u003c\/span\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":51554445918454,"sku":"APL906460","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/4d65a257-acb7-47b4-8f86-64fc829d27b6.jpg?v=1794443796","url":"https:\/\/www.apollolighting.com\/products\/apl906460","provider":"Apollo Lighting","version":"1.0","type":"link"}