{"product_id":"apl996643","title":"Hella Marine 8542 Flush-Mount Deck Floodlight, 12V, 2x55W, IP54","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine 998542001 is a recessed twin-bulb halogen floodlight that throws a wide flood beam for working light on deck, in the cockpit, or under spreaders.\u003c\/p\u003e\u003cp\u003eIt runs on 12V DC and uses two 55W H3 bulbs (110W total), drawing about 9.2A at full output. The front face is about 187 x 107 mm (7.36 x 4.21 in) with a 32 mm (1.26 in) profile, and the lamp body swivels through about 115 degrees so you can aim the beam after installation.\u003c\/p\u003e\u003cp\u003eThe housing is white, fiber-reinforced plastic with a glass diffuser protected by a raised rim, and it carries an IP54 rating for dust and splashing water.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRecessed (flush) mount format that keeps snag points down on hardtops, masts, and deck structures\u003c\/li\u003e\n\u003cli\u003eTwin FF double-reflector optics with a glass diffuser for a wide work-light pattern\u003c\/li\u003e\n\u003cli\u003e12V load: 2 x 55W H3 halogen (110W total), about 9.2A draw\u003c\/li\u003e\n\u003cli\u003eSwivels up to 115 degrees after mounting to put light where you actually need it\u003c\/li\u003e\n\u003cli\u003eIP54 protection for exposed mounting where spray and washdown splash are expected\u003c\/li\u003e\n\u003cli\u003ePre-wired 250 mm connection lead for straightforward wiring inside the mounting space\u003c\/li\u003e\n\u003cli\u003e316 stainless holder and fasteners for better corrosion resistance around salt spray\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDeck floodlight assembly with pre-wired 250 mm connection lead\u003c\/li\u003e\n\u003cli\u003e2 x 12V \/ 55W H3 halogen bulbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is for 12V DC systems. Plan the circuit for roughly a 9 amp load, and size the wire and fuse to match the run length and your boat's electrical standards.\u003c\/p\u003e\u003cp\u003eBecause it is recessed, check the available cavity behind the mounting surface and confirm you have room to route the short lead to a dry junction point. The light outlet is 145 x 83 mm, so placement and aiming matter if you want to keep glare out of the helm.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it on a flat section of structure that stays solid under vibration. Seal the cutout and fasteners to protect cored panels, and keep splices in a sheltered area using tinned wire and heat-shrink connectors.\u003c\/p\u003e\u003cp\u003eOnce powered, aim the lamp through its swivel range, then re-check clearances. Halogen lamps run hot, so keep the back of the unit away from wiring bundles and anything that can soften with heat.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that want a warm halogen work light for handling lines, loading gear, or lighting a cockpit while fishing at night. It also fits spreader and hardtop installs when a broad wash of light is more useful than a tight spot.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt off the lens, keep the glass clean for best output, and replace bulbs as a matched pair when output starts to drop. Let the lamp cool before touching the glass or rinsing with cold water.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Default Title","offer_id":51557093605622,"sku":"APL996643","price":161.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0809\/6658\/2518\/files\/0693980_apl996643_jpeg.jpg?v=1787868282","url":"https:\/\/www.apollolighting.com\/products\/apl996643","provider":"Apollo Lighting","version":"1.0","type":"link"}