QT-80-TI (** NEW VERSION) UWL - Reference part #813956020516 needed w/purchase

Product Description

CLICK PDF FOR PRODUCT SPECS

QT-80-TI  (** NEW VERSION- EVERYTHING IS THE SAME WITH THE EXCEPTION OF BEAM ANGLE IS WIDER AT 120 DEGREE AND A FLAT LENS and made out of Titanium)

 **Fused 4-way Junction box is mandatory with purchase. Reference part #813956020516)

The QT-80Ti LED underwater light features all in one driver technology and exchangeable inserts, this allows servicing and upgrades without the hassle of hauling your boat. With 5,500 lumens of light power and it’s 68° degree beam angle the QT80 LED is recommended for boats up to 90 feet, installing each fixture 2 - 4 feet apart for the best illumination. The housing of the QT80-Ti emulates the proven design of the ULT MATE 80 and can be retrofitted with the new QT80 LED insert. The small 2.5” (61mm) cut out size and compact insert means it can be installed almost anywhere on the boat. Built from anodized aluminum and armor coated AB2 bronze.

 Important note:***up to 4 lights (use of junction box), if more than 4 lights then additional junction will be needed.

SPECIFICATIONS: **Warranty- 2 years)

• Suitable for boats UP TO 90FT (30M)
• 120 degree beam angle
• Available in single color White and Blue 
• 7000 Lumens light output
• 40,000 hours life expectancy
• 12/24 vDC input power for single color
• Reverse Polarity protected.
• Over temperature thermal roll back protection
• Supplied with all mounting and connection hardware.
• Growth Resistant lens

1. MAINTENANCE: CHANGE FROM INSIDE (NO HULL OUT NEEDED)
2. Made of titanium
3. CONTROL: ON/OFF SWITCH
4. DRIVER: INTERNAL
5. GROWTH RESISTANCE LENS: BOROSILLCATE GLASS
6. PER: 12-24VDC
7. INSTALLATION: THRU HULL
8. HULL Material: GRP/FIBERGLASS/CARBON
9.  HOLE CUT OUT: 2.5/61MM
10. LUMENS: 7000
11. KELVIN: 6500 (ALSO AVAIL IN BLUE)