Lopolight 30W Deck/Spreader Light, 26 Deg Reflector, 10-32VDC, IP68
-
Perfect Fit, Guaranteed
Get the right part every time
-
Expert Support
Our in-house specialists know our products inside and out
-
Enhanced Value & Service
We go beyond the sale with professional and balanced services
-
Wordwide Delivery
Enjoy hassle-free worldwide delivery
Lopolight 30W Deck/Spreader Light, 26 Deg Reflector, 10-32VDC, IP68
Write a Review
Lopolight
Lopolight 30W Deck/Spreader Light, 26 Deg Reflector, 10-32VDC, IP68
Overview
The Lopolight 400-080-26 is a 30W deck/spreader light that puts out white light through a 26° reflector and runs on 20 to 32 VDC power. It is dimmable and sealed to IP68, which suits it for exposed mounting where spray, washdowns, and vibration are part of normal life on board.
The focused 26° beam is useful when you want reach and definition instead of a wide flood, such as lighting the foredeck from a hardtop, picking out the working area around mast spreaders, or adding controlled light to a cockpit or bow work zone without blasting the whole boat.
Key features
- 20 to 32 VDC input for 24V systems; current consumption is 1150 mA at 24 VDC
- 26° reflector for a tighter beam that carries down the deck or out from the rig
- Dimmable output for night operations and close-quarters work
- IP68-rated sealing for wet installations and routine washdowns
- Silver anodized aluminum housing with 25µ anodizing, PMMA lens, and A4 stainless steel fasteners
- Compact size (about 89 x 55 mm) with a listed weight of 0.7 kg
- Operating temperature range of -25°C to 55°C
- 0.7 m attached cable; minimum feed wire gauge listed as 0.5 mm2 (22 AWG)
Installation and wiring
Plan this light for a 24V DC boat system within the 20 to 32 VDC range. The attached 0.7 m cable is meant to get you from the light body to a protected connection point, so most installs will involve extending the run with properly sized conductors, sealed connectors, and strain relief where the cable enters the structure.
Because it is dimmable, route wiring so the control gear is accessible and protected from direct spray. Use appropriate circuit protection for the branch circuit and follow your vessel’s electrical standards for terminations and drip loops.
Compatibility and fit
Check the mounting area for clearance using the listed 89 x 55 mm body size, and confirm the beam path before drilling so the 26° pattern lands where you actually work. This style of focused spreader/deck light is often placed higher to take advantage of throw, then dimmed down when you are alongside or working close in.
What’s included
- Deck/spreader light with attached cable
- Mounting hardware
- Installation guide
We ship all in-store (FL) stock orders the same day if placed before 3 PM EST, Monday through Friday. Orders placed after this time will ship the next business day. Orders fulfilled from other warehouses or manufacturers may not ship the same day. If an item is out of stock, we will notify you promptly.
Related Products
Lopolight PRO Towing Light, 2NM, 135°, Yellow Light, 10-32VDC, IP68
Lopolight 225 Deg Masthead Light, 2nm, White Light, Vertical Mount, Silver Housing, 10-32VDC, IP68
Lopolight 301 Series Stern Light, 3 NM, 135° Beam, 10-32VDC, IP68
Lopolight Tri-Color/Anchor Navigation Light, 2NM, 10-32VDC, IP68, 0.75m Cable
Out of stock
Lopolight Spreader Light, White/Red, Surface Mount, 12/24VDC, IP68