Overview

The Vimar Arké 19041 is a 1-module blank module for the ARKÉ flush-mounted wiring range. It closes an unused module position so the face of the installation stays finished while leaving room for future changes. On a boat, that makes it a practical way to keep an on-board switch panel or interior control point neat when one opening is not being used yet.

Across this range, the module format is 1M and the body measures 22.2 x 49 x 20.2 mm. It is a non-powered insert with a nominal voltage of 0 V, made from halogen-free thermoplastic with a matt surface, and it mounts in a built-in arrangement with claw fixing.

Key features

• 1-module blank insert for unused positions in Vimar ARKÉ flush-mounted assemblies
• Compact 22.2 x 49 x 20.2 mm format that matches the standard 1M Arké device size
• Halogen-free thermoplastic body with a matt finish
• Built-in mounting style with claw fixing
• Range includes grey, white, and metal finishes, plus antibacterial grey and white versions

Variants

This product family is offered in several configurations within the same ARKÉ 1-module format.

The attributes that change across the range are finish color and whether the module has antibacterial treatment. The module size, built-in mounting style, thermoplastic construction, halogen-free body, and 22.2 x 49 x 20.2 mm dimensions stay the same across the listed versions.

• VM19041: Grey finish, no antibacterial treatment. Suits grey Arké installations where an unused 1-module opening needs a matching filler.
• VM19041.M: Metal finish, no antibacterial treatment. Keeps the same fit while changing the visible finish to suit metal-look plates and surrounding trim.
• VM19041.B: White finish, no antibacterial treatment. Works where the surrounding devices and cover plate are in white.
• VM19041.AB: Grey finish with antibacterial treatment. Fits the same opening and adds a surface option for interior points that are touched often.
• VM19041.AB.B: White finish with antibacterial treatment. Keeps the same 1-module fit with a white face for lighter interior panels.

Compatibility and fit

This module belongs to the Vimar ARKÉ range, so it should be matched with Arké-compatible frames and cover plates. It fills one 1-module position and is intended to close an opening, not to replace a switch, socket, or other active device.

It is a good match for cabin switch banks, protected helm panels, and service areas where the layout needs to stay complete even though one module position is being left unused for now.

Installation and setup

The blank module snaps into a built-in modular assembly using claw fixing. That makes it straightforward to add during a new panel build or when cleaning up an existing Arké installation after removing or relocating a device.

For marine refit work, it helps keep the panel face closed and visually consistent while preserving a spare position for a future control, outlet, or other Arké module.