Marine Instrument Connectors

OverviewThe Blue Sea Systems 3125 is a PG16 SMS enclosure gland for #14 to #10 cable with up to three conductors. It is used to bring cable into a Blue Sea SMS Surface Mount System enclosure without...

OverviewThe Blue Sea Systems 3124 is a small PG7 cable gland for one #14 to #10 wire in the SMS Surface Mount System. It fits cable outside diameters from 0.114 to 0.250 in. (2.9 to 6.4 mm) and uses...

OverviewThe Blue Sea Systems 2715 is a common busbar cover for Blue Sea Systems 2301 and 2303 busbars. It fits the 2301 Common 150A BusBar - 10 Gang and the 2303 Common 150A BusBar - Four 1/4"-20...

OverviewThe Blue Sea Systems 2713 is a MiniBus busbar cover made to fit Blue Sea Systems 2304 and 2305 busbars in installations where space is tight. It matches MiniBus setups used up to 100A AC/DC,...

OverviewThe Blue Sea Systems 2710 is a snap-on cover for the DualBus 2702 busbar, sized to shield the terminal area while still leaving wire runs accessible. It is a small but useful finishing piece...

OverviewThe Blue Sea Systems 2709 is a snap-on cover for the Blue Sea Systems 2701 DualBus 100A bus bar. It measures 4-3/16 in. long, 7/8 in. high, and 2-1/2 in. wide, so it matches the 2701...

OverviewThe Blue Sea Systems 2708 is a busbar cover sized for the Blue Sea Systems PowerBar 2104. It measures 8.500 x 3.375 x 2.750 inches and fits over the 2104 busbar to put a physical barrier over...

OverviewThe Blue Sea Systems 2020 is a compact DC power busbar for bringing two heavy-current cable terminations to one common connection point on board. It uses two 3/8"-16 studs, is rated up to...

OverviewThe Blue Sea Systems 2019 is a dual-stud common busbar for creating a single high-current connection point in DC systems up to 48V. It uses two 3/8"-16 studs and carries up to 200A, so it...