-
Sold out
Raymarine Hailing Horn, For Ray220 & Ray430, 30W, 8 Ohm, White Plastic
OverviewThe Raymarine M95435 is an external hailing horn speaker for Raymarine loudhailer and fog signal systems, including setups built around the Ray220 and Ray430. It uses an 8 ohm speaker load...$264.99Out of stock
-
Raymarine Solenoid Valve, For Raymarine Autopilots, 12V
OverviewThe Raymarine M81167 is a 12V DC solenoid valve for Raymarine Raypilot autopilot systems. It is used in marine steering installations where the autopilot needs electric valve control as part...$499.99 -
Raymarine Double Pilot Check Valve, For Autopilot Systems
OverviewThe Raymarine M81166 is a double pilot check valve for marine hydraulic steering systems using a Raymarine autopilot pump. It helps hold hydraulic pressure in the steering circuit and limits...$299.99 -
Sold out
Raymarine Type 0.5 Autopilot Hydraulic Pump, For ACU-100, 12V, 50-110cc
OverviewThe Raymarine E12139 is a Type 0.5 hydraulic autopilot pump for 12 V systems, matched to hydraulic steering cylinders from 50 to 110 cc and used with the ACU-100. It is the pump section used...$899.99Out of stock
-
Raymarine RCR-SDUSB Remote SD Card Reader, For Axiom Chartplotters, USB-A Port
OverviewThe Raymarine A80440 is a remote SD card reader with a USB-A socket for Raymarine Axiom, Axiom+, Axiom Pro, Axiom Pro 2, and Axiom XL chartplotter displays. It adds 1 SD card slot and 1 USB-A...$199.99 -
Raymarine SeaTalk NG In-Line Terminator, For Backbone Ends, Single Spur Connection
OverviewThe Raymarine A06074 is an in-line SeaTalkng terminator that combines backbone termination with a single spur connection at the end of the network. It is used where a device needs to connect...$34.99 -
Raymarine SeaTalk NG Spur Blanking Plug, For Unused Spur Connections
OverviewThe Raymarine A06032 is a SeaTalk NG blanking plug for closing an unused white spur connection in a Raymarine SeaTalk NG network. It locks into the open spur port to help weatherproof that...$22.99 -
Raymarine SeaTalk NG Backbone Terminator
OverviewThe Raymarine A06031 is a SeaTalkNG backbone terminator used to close each physical end of a SeaTalkNG backbone. Two terminators are required in every system, and they help keep network...$27.99 -
Raymarine SeaTalk NG Backbone Extender, Connects 2 Backbone Cables
OverviewThe Raymarine A06030 is a SeaTalkNG backbone extender that joins two blue SeaTalkNG backbone cables into one longer run, or connects a network terminator at the far end of a backbone cable...$34.99 -
Raymarine SeaTalk NG T-Piece Connector, Single Spur Connection
OverviewThe Raymarine A06028 is a SeaTalkNG T-piece connector for adding one white spur connection to a blue SeaTalkNG backbone run. It has one white spur connection point and two blue backbone...$39.99 -
Sold out
Raymarine Wireless NMEA Interface, For Micronet Wireless Systems, NMEA 0183 v2.30, 2 Inputs/1 Output
OverviewThe Raymarine T122 is a wireless NMEA interface that links wired NMEA 0183 electronics to the Micronet Wireless network. It runs on 9-24 V DC, supports NMEA 0183 version 2.30, and gives you...$534.99Out of stock
-
Raymarine VCM100 Voltage Converter Module, For Open Array Radars, 12/24V DC
OverviewThe Raymarine E70648 is a VCM100 voltage converter module for compatible Raymarine open-array radar systems. It connects between the vessel's 12 V or 24 V DC supply and the radar scanner,...$304.99