Raymarine Ray60 Bezel, Black Plastic

Overview

The Raymarine A80333 is a black plastic bezel for the Raymarine Ray60 fixed mount VHF radio. It is the front trim piece used when the radio face needs a clean black surround, whether replacing a worn bezel or matching the radio more neatly to a dark helm panel.

This is a non-electrical accessory, so it does not affect 12V or 24V power, antenna connections, DSC setup, NMEA wiring, or radio programming. Its job is simple but important: give the Ray60 installation a finished face and help keep the radio looking tidy at the helm, cabin communication station, or electronics panel.

Key features

• Fits the Raymarine Ray60 fixed mount VHF radio.
• Black plastic bezel used as the front trim around the radio face.
• Useful as a replacement part when the original bezel is scratched, missing, or no longer matches the helm layout.
• Non-electrical part with no wiring, voltage, network, antenna, or software setup required.
• Compact package size of 1 in x 4 in x 8 in with an approximate weight of 0.1 lb.

Installation and fit

Before ordering, confirm that the radio on board is a Raymarine Ray60, not a different Raymarine VHF model. The bezel is model-specific trim, so the correct fit depends on the radio face and mounting layout.

During installation, align the bezel evenly around the radio face and press it into place with steady pressure. After fitting, check that all front controls remain clear and easy to operate, especially on helms where gloves, spray, and low-light use are common.

Use on board

This bezel makes sense for owners, installers, and refit crews working on a Ray60 installation where the radio is still in service but the front trim needs attention. It is a practical detail for center consoles, pilothouses, sailboat nav stations, and enclosed helm panels where the VHF stays visible and within reach.