Raymarine Axiom Pro 16 Bracket Ball Mount Plate

Overview

The Raymarine A80537 is an adapter plate for mounting an Axiom Pro 16 display with a bracket or ball-style mounting system. It attaches to the rear of the Axiom Pro 16 and gives installers a practical way to use a mount arrangement that suits the helm layout, dash angle, viewing position, and available space on board.

This plate is useful when a fixed flush installation is not the right fit, such as on a pilothouse dash, center console, flybridge, or electronics pod where the display needs to sit proud of the surface or work with an adjustable mount. It helps keep the large 16-inch Axiom Pro display positioned where it can be read and operated comfortably while underway.

Key features

• Made for the Raymarine Axiom Pro 16 multifunction display.
• Supports bracket or ball-style mounting when the installation calls for a raised or adjustable display position.
• Attaches directly to the Axiom Pro 16, giving the mount a secure interface to the display body.
• Works with most mounting solutions, which helps when matching the display to an existing helm layout or a new custom installation.
• Suited to helm stations, consoles, flybridges, and other marine locations where visibility and access matter during navigation, fishing, or cruising.

Installation and fit

Before installation, confirm that the display is a Raymarine Axiom Pro 16 and that the selected bracket or ball mount has the strength, footprint, and range of movement needed for a 16-inch multifunction display. The mounting surface should be rigid enough to handle vibration, wave impact, and the leverage created by a raised display.

Plan cable routing before tightening the final mount position. Leave enough clearance behind the display for power, network, transducer, and accessory cabling, and check that the screen can still tilt or rotate without pinching connectors or blocking nearby switches, compasses, throttles, or instrument panels.

Use on board

This adapter plate is a good match for owners and installers who want an Axiom Pro 16 mounted where the screen angle can be adjusted or where the dash is not suited to a flush cutout. It is especially practical for refits, open helm stations, and larger consoles where the display needs to be easy to see from a seated or standing driving position.