TACO Marine Aluminum/Poly 3-Rod Rack Holder, Brite-Dipped Anodized Finish, PVC White Liner

Overview

The TACO Marine F31-3103BXZ-1 is a 3-rod aluminum and poly rod rack for organizing light- to medium-tackle spinning rod and reel combos on board. It gives anglers a fixed storage point for rods in the cockpit, leaning post area, cabin entry, or another protected mounting location where loose tackle can get in the way.

The rack uses a brushed aluminum finish with poly rod supports and a form-fitted white PVC liner to help separate the rods from the holder surfaces. Each rod position has a 1-1/2" inside diameter, and the rack length is 13-3/8", making it a compact option for boats that need three ready storage spots without taking over the working deck.

Slotted rod positions help lock rods and reels into place while the integrated knife and plier slots keep common fishing tools close at hand. Recessed fasteners help the rack sit cleanly once installed, which matters in areas where lines, clothing, or hands may brush past the holder during a day of fishing.

Key features

• Holds three rods in a surface-mount rack layout for cockpit, cabin, console, or gear-station storage.
• 1-1/2" rod holder inside diameter suits light- to medium-tackle spinning rod and reel combos.
• 13-3/8" rack length helps fit three rod positions into a compact storage footprint.
• Brushed aluminum finish with poly racks gives the holder a clean look for visible mounting areas.
• Slotted rod positions help keep rods and reels from shifting while the boat is moving.
• Form-fitted white PVC liner helps protect rods where they sit in the rack.
• Integrated knife and plier slots keep frequently used fishing tools organized near the rods.
• Recessed fasteners reduce exposed hardware and support a neater finished installation.
• Made in the USA and backed by a 1-year limited warranty.

Installation and placement

This rod rack is meant for a fixed surface-mount installation, so the mounting area should be flat, strong, and easy to reach while fishing. Common locations include a cockpit side panel, console face, cabin bulkhead, leaning post area, or a tackle station where rods can stay vertical and out of the deck traffic path.

Before drilling, check the clearance behind the mounting surface and confirm that the rods and reels will not interfere with seating, hatches, controls, canvas, or walkways. A dry fit with the rods in place is useful because reel size and handle orientation can change how much working space the rack needs.

Use cases on board

This rack fits boats that need practical storage for a few spinning outfits without moving to a larger multi-rod system. It works well for coastal fishing, bay boats, center consoles, family fishing boats, and dockside storage where keeping rods upright and easy to grab is more important than adding flush-mounted rod holders.

It is a good match for anglers who want rod storage plus space for a knife and pliers in one tidy location. The 3-rod layout keeps the setup simple and readable, which helps when the crew is changing rigs, clearing the deck, or putting gear away after a run.

Maintenance and care

After saltwater use, rinse the rack with fresh water and wipe away trapped salt around the slots, liner, and fastener recesses. Keeping the holder clean helps preserve the finish and keeps rods sliding in and out without grit rubbing against the liner or reel seats.