TACO Marine Tube Style Flexible Vinyl Rub Rail Insert, 1/2 in Dia

Overview

The TACO Marine V12-0003 is a 1/2 inch tube style flexible vinyl insert for compatible boat rub rail systems. It fits into the rub rail channel to help cover the fasteners and add a softer contact surface along the hull edge, which is useful around docks, pilings, slips, and raft-ups where rub rail contact is common.

This insert is made from soft PVC and is used with flexible rub rail profiles. It is a match for TACO Marine flexible rub rails V11-2423, V11-3447, and V11-4014, so it is best suited for replacing worn insert on an existing compatible rail or completing a rub rail installation where those profiles are being used.

Key features

• 1/2 inch tube style profile for compatible flexible rub rail channels.
• Soft PVC construction adds a cushion effect to help absorb everyday contact at the rail.
• Covers rub rail fasteners for a cleaner finished look along the hull side.
• Fits TACO Marine flexible rub rail profiles V11-2423, V11-3447, and V11-4014.
• Available in Black and Arctic White finishes to match common rub rail and hull trim combinations.
• Made in the USA and backed by a 5-year limited warranty.

Variants

This insert is offered in multiple length and finish configurations for replacement jobs, repairs, and full rub rail runs.

The tube style, 1/2 inch insert profile is consistent across the range. The length and color finish change by variant, so the correct option depends on the rail length being serviced and the visual match needed for the boat.

• V12-0003BKA50-1: 50' length in Black. This size works well for shorter replacement sections or smaller boats where a full long coil is not needed.
• V12-0003BKA70-1: 70' length in Black. The longer coil gives more coverage for extended rail runs while keeping the same black finish.
• V12-0003WHA50-1: 50' length in Arctic White. This finish gives the rub rail a lighter trim appearance and suits boats with white or light-colored rail details.
• V12-0003BKA250: 250' length in Black. This bulk length is useful when servicing longer perimeter runs or multiple sections with the same black insert.

Installation and fit

Confirm the existing rub rail profile before ordering, especially on older boats or boats with previous repairs. The insert must match the channel shape and size, not just the visible color, and this 1/2 inch tube style insert is intended for the compatible flexible rub rail profiles listed above.

During installation, the insert should not be stretched into place. Stretching can make the vinyl pull back after it relaxes, leaving gaps at corners, ends, or joints. A steady installation along a clean rail channel helps the insert sit evenly and keeps the finished edge looking consistent.

Use cases on board

This insert is a practical replacement part for boats with rubbed, cracked, faded, or missing rub rail insert. It is also useful during rub rail refits when the outer rail is being reused but the visible insert needs to be renewed for a cleaner edge and better contact surface.

It is a good match for boat owners, yards, and installers working on flexible TACO Marine rub rail systems where the fastener cover and impact cushion need to be restored without replacing the entire rail assembly.