TACO Marine Flexible Vinyl Rub Rail Insert, 1-3/16 in x 1/2 in

Overview

The TACO Marine V12-4144 is a flexible vinyl rub rail insert measuring 1-3/16 in x 1/2 in for restoring the finished face of compatible boat rub rails. It covers exposed rub rail fasteners and gives the rail a cleaner edge while adding a soft PVC contact surface where the boat may meet docks, pilings, trailers, or another vessel.

This insert is a practical replacement when the original rub rail insert is cracked, faded, missing, or pulled out of the track. Match the 1-3/16 in height and 1/2 in width to the existing rub rail profile before ordering, and confirm the required length around the hull so the installation can be completed with as few seams as possible.

Key features

• Flexible vinyl insert for compatible rub rail profiles that accept a 1-3/16 in x 1/2 in insert.
• Soft PVC construction helps cushion light impact at the rub rail contact point.
• Covers rub rail fasteners for a finished look along the hull side.
• Available in 50 ft, 70 ft, and 250 ft lengths to suit partial repairs or full rub rail insert replacement.
• Color options include Black and Arctic White, depending on the selected length.
• Flexible form supports installation around curved hull sections without heat in many typical replacement jobs.
• Made in the USA.

Variants

This product is offered in multiple length and color configurations. The insert profile remains 1-3/16 in x 1/2 in across these variants, while the roll length and finish color change by part number.

Black is available in shorter service lengths and a long 250 ft length, while Arctic White is available in a 70 ft length for boats that need a lighter rub rail accent.

• V12-4144BKA50-1: 50 ft length, Black. This length works well for smaller replacement runs, localized repairs, or boats that do not need a full long coil.
• V12-4144BKA70-1: 70 ft length, Black. The 70 ft coil gives more continuous coverage for many full-side or full-perimeter replacement jobs.
• V12-4144BKA250: 250 ft length, Black. This longer roll suits shop use, refit work, or larger projects where longer continuous runs help reduce seams.
• V12-4144WHA70: 70 ft length, Arctic White. The Arctic White finish fits boats where a lighter insert better matches the hull, deck, or existing trim.

Installation and fit

Fit depends on the rub rail channel, not only the boat brand or model year. Before installation, compare the old insert cross-section with the 1-3/16 in x 1/2 in profile and inspect the rail track for bent sections, old sealant, broken fasteners, or debris that could keep the new insert from seating properly.

For a cleaner result, lay out the run before pressing the insert into the rail and avoid stretching the vinyl during installation. On replacement work, a continuous length can help reduce visible joints, especially along exposed hull sides where the rub rail is most noticeable.

Use cases on board

This insert is a good match for owners restoring the appearance of an aging rub rail, replacing damaged insert after dock contact, or refreshing trim during a larger hull and deck refit. It is also useful for service yards that need a flexible replacement insert in common marine colors and practical coil lengths.