TACO Marine SuproFlex Rub Rail, 2.5 in x 1 in, Black, 100 ft

Overview

The TACO Marine V11-9970BKA100D is a large SuproFlex rub rail in black, sized at 2.5" x 1" for hull-side protection on medium to large boats. It is a 100 ft continuous coil profile made from co-extruded vinyl, with a rigid backing and a softer front face that helps absorb contact at docks, pilings, trailers, and alongside other vessels.

This rub rail is built for installations where the rail needs to follow the shape of the hull without heavy pre-forming. The SuproFlex construction uses two levels of hardness, allowing the rail to hold its base shape while the outer face handles everyday impact. It is suitable for boats up to 65 ft, making it a practical choice for center consoles, cruising boats, and refit projects where the original rub rail is worn, cracked, faded, or no longer protecting the hull properly.

The black finish gives the boat a clean, defined rub rail line and pairs with TACO Marine Flex Chrome Insert V12-9980 when that insert is used separately. For installers, the profile calls for #10 screws spaced 4" on center, which helps plan fastening layout before the old rail is removed.

Key features

• Large 2.5" x 1" profile for hull-side protection on boats up to 65 ft.
• 100 ft continuous coil format helps reduce joints and supports a cleaner finished run around the hull.
• Co-extruded vinyl uses two hardness levels, combining a rigid backing with a softer impact face.
• Shock-absorbing channels help the rail handle routine contact from docking, rafting, and trailer loading.
• Flexible profile requires no pre-forming and only minimal heat for tighter bends during installation.
• Accepts #10 screws at 4" on center for a secure mechanical attachment pattern.
• Compatible with TACO Marine Flex Chrome Insert V12-9980, sold separately, for a finished accent strip.
• Made in the USA and covered by a 5-year limited warranty.

Installation and fit

This SuproFlex profile is meant to conform to most hull shapes while keeping the installation manageable for refits and new builds. The continuous coil format is helpful when working around the bow, quarters, and long sheer lines because it limits the number of interruptions in the rail.

Before installation, check the existing rub rail footprint, screw pattern, hull flange condition, and available landing surface. The 2.5" height and 1" projection should be compared with the original profile so the new rail covers the old fastener line and sits correctly against the hull and deck joint.

Use cases on board

This rub rail fits boats that see regular dockside contact, marina use, trailering, fishing trips, and coastal cruising. It is especially useful on vessels where the rail must take everyday bumps without adding unnecessary installation complexity.

It is a good match for owners, yards, and builders replacing tired vinyl rub rail or upgrading to a profile with a softer impact face and a cleaner black finish.

Maintenance and care

Rinse the rub rail with fresh water after saltwater use and clean it with boat-safe soap as part of normal washdowns. Avoid harsh solvents or abrasive pads that can dull the vinyl surface or affect the finish over time.