Jabsco Twist 'n' Lock Manual Toilet Major Service Kit, For 29090 and 29120 Series, 1998-2007

Overview

The Jabsco 29045-2000 is a major service kit for Manual 29090 and 29120 Series marine toilets built from 1998 through 2007. It fits the 29090-2 and 29120-2 manual toilet range and covers the main wear parts in the pump and discharge section, including the seal assembly, joker valve, valve spring, and related gaskets and O-rings.

This is the right kit when the toilet itself is staying in place and the service work is focused on the internal pump parts rather than a full pump assembly swap. For boats that still run these earlier manual heads, it gives you the core rebuild parts in one pack and keeps the repair matched to the original toilet generation.

Key features

• Fits Jabsco 29090-2 and 29120-2 manual marine toilets from 1998 through 2007
• Major service kit for the working parts inside the manual pump and discharge path
• Includes the seal assembly, joker valve, valve spring, and core gaskets and O-rings used in a rebuild
• Suitable when the existing toilet remains in place and the goal is to refresh the internal wear parts
• Well matched to older manual heads still in use on cruising boats, fishing boats, and dayboats

Compatibility and fit

Fit matters here more than bowl style or cabin layout. Before ordering, confirm that your toilet is from the Jabsco 29090 or 29120 manual series in the 1998 to 2007 production window. This kit is tied to that service pattern and should not be treated as a universal rebuild kit for all Jabsco manual toilets.

It makes the most sense when the bowl, base, and main pump housing are still serviceable and you are refreshing the internal wear items that control sealing and discharge. If your toilet needs a full pump assembly or base hardware, those are separate parts.

Installation and service

Most of the parts in this kit are small service items, so it works well for bench service or an onboard rebuild where access around the toilet is limited. Clean the valve seats and pump surfaces before reassembly, and inspect the discharge hose and mounting points at the same time so the new seals are not being asked to compensate for problems elsewhere in the system.

For boat owners who keep older manual sanitation systems going, this kit is a practical match because it targets the normal wear points without changing the toilet layout, plumbing runs, or the manual operation of the head.

What’s included

• 2 screw caps
• 1 base valve gasket
• 1 seal assembly
• 1 top valve seat
• 1 top valve gasket
• 1 O-ring for the flush lever
• 1 screw for the flush lever
• 1 buffer
• 1 screw for the valve cover
• 1 O-ring for the piston
• 1 screw for the pump cylinder
• 1 joker valve
• 1 valve spring

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.