Overview

The Raymarine R70663 is a black instrument suncover for Raymarine i50, i60, i70, i70s, p70 and p70s displays with square eS/AXIOM style bezels. It covers the screen and front face when the instrument is not being used, helping reduce UV exposure, surface scuffs and everyday knocks around the helm or cockpit.

This is a simple fit-and-remove protective cover, not an electrical part, so there is no 12V or 24V wiring, networking setup or software configuration involved. The key fit point is the bezel style: it is intended for the square eS/AXIOM style front profile used with the listed Raymarine instruments.

Key features

• Fits Raymarine i50, i60, i70, i70s, p70 and p70s instruments with square eS/AXIOM style bezels.
• Black cover helps shield the display screen and front face from UV light when the instrument is not in use.
• Helps reduce surface damage from minor contact at the helm, cockpit, nav station or storage area.
• No power, data or NMEA connection is required because this is a passive protective accessory.
• Useful for open cockpits, flybridges and exposed helm stations where instruments spend long periods in sunlight.

Compatibility and fit

Before ordering, match the cover to the instrument and bezel shape rather than relying on screen size alone. This cover is for the square eS/AXIOM style bezel used on compatible Raymarine i50, i60, i70, i70s, p70 and p70s units.

For boats with older rounded a/c/e style bezels, this cover is not the right fit. Checking the front profile of the installed instrument is the safest way to avoid a loose or mismatched cover.

Use on board

This cover is a practical add-on for boats where instruments remain mounted outside between trips, including sailing cockpits, fishing boat consoles and secondary helm stations. It is most useful when the electronics are powered down, docked, covered for the day or left exposed between outings.

Maintenance and care

Keep the inside of the cover and the display face clean before fitting it, especially after salt spray, dust or cockpit debris. Removing grit first helps prevent scratches when the cover is placed over the screen.

Remove the cover before running at speed or towing the vessel so it is not lost to wind or vibration.