Vimar 8000 Series 1P 2-Way Switch, 16AX 250V, 1 Module, Matt Beige RAL 9001, IP40

Overview

The Vimar VM08005 is a 1-pole, 2-way rocker switch rated 16AX at 250V AC for switching a circuit from two locations on board.

It mounts flush in a modular Vimar 8000 Series layout with snap-in fastening, and the compact body helps when you are working behind tight liners or switch panels. The housing is IP40, so it is intended for protected interior locations behind a cover plate rather than exposed deck, cockpit, or washdown areas.

The halogen-free thermoplastic body has a beige finish (RAL 9001) with a matt, untreated surface that blends neatly into light-colored panels.

Key features

• 2-way switching for controlling one circuit from two points, such as a companionway and a cabin entry.
• 16AX, 250V AC rating, with support up to 200 W for self-ballasted lamps.
• IP40 protection for dry, protected installations behind a faceplate or inside an enclosed panel.
• Flush-mount module with snap-in fastening for clean installs and quick service access.
• Halogen-free thermoplastic housing for an installation that stays tidy and lightweight.
• Beige color (RAL 9001) with a matt surface finish.
• Compact dimensions: 22.00 mm wide, 50.10 mm high, 35.50 mm deep; 24.00 mm built-in depth.

Installation and wiring

A 2-way switch is used when the same load needs control from two different locations, using the appropriate two-way wiring method for your system. Keep the switch in a dry, protected area, and route conductors so they are supported and not pulling on the terminals when the boat is moving.

Before installation, isolate power, confirm circuit voltage and load type, and verify that the switch rating matches the application. After commissioning, recheck the fasteners and wiring after the first few outings if the panel lives in a high-vibration zone.

Compatibility and fit

This is a 1-module device in the Vimar 8000 Series. Confirm your existing mounting frame and cover plate style, and check clearances behind the panel using the built-in depth and overall body dimensions.

Use on board

This switch makes sense for boats already using Vimar modular plates where you want the same light or accessory controlled from two spots, like a berth area and the main cabin passage. It is also a good fit for refits where you are keeping the existing Vimar layout and need a matching 2-way module.

Maintenance and care

Wipe the face with a soft, lightly damp cloth and avoid solvent cleaners that can mark plastics. If the switch lives near a companionway or hatch, keep the installation protected from spray and check periodically that moisture is not entering the panel.

Orders are processed within 2 business days, which includes verification, packing, and dispatch. Orders of $100 or more qualify for free shipping when eligible. For orders under $100, shipping costs are calculated at checkout based on destination, package weight, and selected service. International shipping is available for eligible products, and certain items may require additional handling, warehouse transfers, or may ship directly from the manufacturer, which can affect processing time.

Deliveries are handled by preferred carriers such as USPS, UPS, FedEx, DHL, and others depending on your location and selected service. Estimated delivery times are displayed at checkout and may vary due to customs processing, carrier delays, weather, postal disruptions, or other circumstances beyond our control. Once your order ships, you'll receive a confirmation email with tracking information. Tracking may take up to 24 hours to update on the carrier's website and is also available through your account when applicable.

We ship throughout the United States and to most international destinations for products eligible for international shipping. International orders may be subject to customs duties, taxes, brokerage charges, or other import fees, which are the customer's responsibility and are not included in the product or shipping price. PO Boxes are accepted only when shipping through USPS, and not all packages qualify for this option. If your order does not arrive within the estimated delivery window, please contact us at info@apollolighting.com or +1 (954) 375-0100 so we can assist with locating your package.

Learn more.

Returns may be requested within 30 days of receiving your order. Items must be unused, uninstalled, unaltered, and returned in their original packaging with all tags, packing materials, blank warranty cards, manuals, instructions, accessories, and included items. Certain products, including installed or used electronics, electrical components, lighting, consumables, custom or special-order items, cut-to-length products, safety equipment, and merchandise exposed to water or marine conditions, may not be eligible for return.

To request a return, sign in to your account and select the applicable order and items, and submit your request for review. Eligible unfulfilled items may also be submitted for cancellation within 1 hour of placing the order. Returns or cancellations are not considered approved until you receive confirmation from Apollo Lighting. Please do not ship or drop off merchandise before receiving return approval and instructions.

Customers are responsible for arranging and paying for return shipping unless the return is due to an error by Apollo Lighting or the item is verified as defective, damaged, or incorrect. Missing, damaged, defective, or incorrect items must be reported within 2 business days of delivery, and photos or other documentation may be required for review. If the issue is verified, Apollo Lighting may provide or reimburse return shipping and issue a replacement or refund depending on the circumstances. International customers are responsible for return shipping, duties, taxes, customs charges, brokerage fees, and other costs associated with an international return.

After your return is received and inspected, approved refunds are issued to the original payment method and may take 5-7 business days to appear after processing. Original shipping and handling charges are nonrefundable, and the value of any included free items that are not returned may be deducted from the refund. Apollo Lighting does not charge a standard restocking fee on eligible returns. Returns that are incomplete, damaged, installed, used, altered, improperly packaged, or otherwise do not meet the eligibility requirements may be refused. We recommend using a trackable and appropriately insured shipping service for all customer-arranged returns.

For assistance, contact info@apollolighting.com or call +1 (954) 375-0100.

Learn more.

Many products sold by Apollo Lighting include a manufacturer's warranty covering defects in materials or workmanship. Warranty terms vary by brand, product category, and model, so eligibility, coverage duration, exclusions, and available remedies are determined by the applicable manufacturer. We recommend reviewing the warranty information provided with your product before installation or use, especially for marine electronics, navigation equipment, lighting, electrical systems, pumps, safety equipment, and other specialized marine products.

If you need warranty service, the claim must follow the process established by the manufacturer, authorized service center, or designated warranty provider. You may be asked for proof of purchase, a serial number, product registration, photos, maintenance or installation records, or other documentation. Apollo Lighting does not determine or modify a manufacturer's warranty coverage or final claim decision, but we are happy to help provide purchase information and direct you to the appropriate manufacturer or warranty resource.

Keep your receipt, product documentation, serial number information, and original packaging when practical. Damage caused by normal wear, misuse, improper installation, insufficient maintenance, corrosion, impact, unauthorized modifications, electrical issues, or operation outside the manufacturer's specifications may not be covered. Warranty claims are separate from standard returns, so a product that has been installed, used, or exposed to marine conditions may no longer qualify for return while still remaining eligible for evaluation under the manufacturer's applicable warranty.

Learn more.