Overview

The Garmin 010-12507-02 is a fist mic hanger that gives your VHF microphone a proper home at the helm, so it is not swinging on the cord when the boat is moving. It mounts on a flat surface and lets you hang the mic back up quickly after a call or a radio check.

This hanger is made for the fist microphone used with Garmin VHF 110 and VHF 115, as well as VHF 210 and VHF 215 models including AIS versions. There are no electrical connections involved, so fit comes down to the microphone style and how you want it positioned on your console or bulkhead.

Key features

• Keeps the fist microphone parked where the crew can reach it without digging around the console
• Compatible with Garmin VHF 110, VHF 115, VHF 210, VHF 215, and the AIS versions of the 210 and 215
• Mounting hardware is included for a straightforward screw-on install
• Works well as a replacement hanger when the original clip is missing or damaged
• Helps prevent the mic and cord from bouncing against electronics and trim while underway

Compatibility and fit

Use this hanger with the fist microphone for Garmin VHF 110 and 115 radios, plus VHF 210 and 215 units including AIS models. It is intended to hold the microphone, not the radio itself. If your boat has a different brand or a different Garmin mic style, confirm the mic shape matches before ordering.

Installation and setup

Mount it where the mic naturally lands when you set it down, usually on a helm face, side panel, bulkhead, or inside a nav station. Leave enough slack in the mic cord so it can be lifted off and used without pulling on the connector. On thin fiberglass or high-vibration panels, a backing plate or well-supported mounting spot helps the hanger stay secure over time.

What’s included

• Fist mic hanger
• Mounting hardware

Maintenance and care

Rinse or wipe the hanger occasionally, especially after salt spray, and check the mounting screws as part of routine helm hardware checks. Keeping the mic clipped up when not in use also helps the cord and connector last longer.