Overview

The Garmin 010-10911-00 is a protective cover for compatible GPSMAP 4xx and 400-series display units. It slips over the face of the unit to keep the screen and keypad covered when the boat is parked at the dock, stored on a trailer, or tied up for the week.

This cover is a simple way to cut down on sun exposure, salt spray, and day-to-day scuffs that build up on exposed displays. It is lightweight at about 0.15 lb, so it is easy to stow in a console or nav station when you are underway.

Key features

• Protective cover sized for Garmin GPSMAP 4xx and select 400-series displays
• Covers the face of the unit to help shield the screen and keys from spray, sun, and scratches while moored or trailering
• Compatible with Fishfinder 400C, GPSMAP 420/420s, GPSMAP 421, GPSMAP 430/430s, GPSMAP 431, GPSMAP 440/440s, and GPSMAP 441/441s
• Lightweight accessory at about 0.15 lb for easy storage on board

Compatibility and fit

This cover is specific to the Garmin GPSMAP 4xx form factor and the compatible 400-series units listed above. If your display is from a different GPSMAP series or a different screen size, the fit will be off, so it is worth confirming the exact model on your bezel before ordering.

Installation and use

Fit is straightforward: align the cover to the face of the display and press it into place until it seats evenly. For best results, wipe down the screen and keys first so grit is not trapped between the cover and the display.

On boats that live outside, many owners keep the cover on whenever the display is not in use, then remove it before running. It is also a good match for trailered boats where road dust and strap contact can mark up an uncovered screen.

Maintenance and care

Rinse with fresh water if it gets hit with salt spray, then let it dry before reinstalling or stowing. Avoid harsh solvents or abrasive pads that can haze the surface over time.

What’s included

• Protective cover for compatible GPSMAP 4xx and 400-series displays