TACO Marine Rub Rail End Cap, For A11-0334/0316 Profiles, 1 in, Black Nylon

Overview

The TACO Marine F90-0750BN is a 1 inch black nylon rub rail end cap for finishing the end of a boat rub rail installation. It caps the rail at the stern area and helps keep the rub rail insert from working loose, giving the installation a clean end point instead of leaving the profile open.

This end cap is sold individually and mounts with a #4 screw. It is a practical replacement part for rub rail repairs, refits, and new installations where the rail profile needs a finished termination point on a hull that sees washdowns, sun exposure, dock contact, and regular vibration underway.

Key features

• 1 inch rub rail end cap for closing off the end of a compatible rub rail profile.
• Black nylon construction matches black rub rail hardware and stands up well in normal marine exterior use.
• Helps keep the rub rail insert seated at the end of the rail after installation.
• Mounts with a #4 screw, so installers can match the fastener to the hull material and existing rail setup.
• Sold individually for single-end repairs, replacements, or completing one side of a rub rail run.
• Made in the USA and backed by a 5-year limited warranty.

Compatibility and fit

This end cap is listed for TACO Marine 1 inch rub rail applications, with profile reference A11-0334/0316. It is also commonly used with TACO Marine rub rail systems that call for the F90-0750BN end cap, including compatible flexible vinyl and aluminum rub rail installations. Before ordering, match the rub rail profile and end shape to the rail already on the boat, especially on older hulls or rails that may have been replaced before.

Installation notes

Fit the end cap after the rub rail and insert are seated. The cap should sit flush against the end of the rail without forcing the insert out of position. Use the correct #4 screw for the mounting surface, and bed the fastener as appropriate for the hull material and exposure area to help limit water intrusion around the screw hole.

Use cases on board

This part is a good match for owners or installers finishing a rub rail replacement, repairing a missing stern end cap, or cleaning up an exposed rail end after a dock-impact repair. It suits small powerboats, fishing boats, skiffs, sailboats, and other vessels using a compatible TACO Marine rub rail profile.