Overview

The Garmin 010-11062-00 is a set of top and bottom snap covers that fit the GPSMAP 5215 chartplotter. They clip over the unit when it is not in use to help protect the display area and front face from dockside scuffs, salt spray, and sun exposure.

This set works well as a direct replacement when the original covers have gone missing or no longer fit cleanly. The covers also remove quickly when you need full access for operation, service, or flush-mount work.

Key features

• Two-piece cover set: top and bottom snap covers for GPSMAP 5215
• Snaps on and off by hand for quick protection between trips
• Helps keep the front of the unit cleaner during washdowns and storage
• Removable covers support flush-mount installs where quick access matters
• Replacement fit that keeps the helm looking tidy when the display is covered

What's included

• Top snap cover
• Bottom snap cover

Compatibility and fit

Fits Garmin GPSMAP 5215 units. Confirm the model number on your display before ordering, since covers for other GPSMAP sizes are not interchangeable.

Installation and use

Align each cover with the bezel and press along the edges until it seats. To remove, lift from an edge and unsnap, then stow the covers somewhere they will not get stepped on or bent while underway.

Use on board

This cover set suits boats that keep the chartplotter installed at the helm, whether the boat lives on a trailer, at a slip, or on a mooring. It also helps for crews that run in salty conditions and want the display protected while the boat is at rest or during cleanup at the dock.

Care and storage

Rinse with fresh water after heavy spray or washdowns and wipe dry before snapping the covers back on. Avoid harsh solvents that can haze plastics, and store the covers flat when they are off the unit.