Victron Energy GX Touch 50 Adapter for CCGX Cut-Out, 5 in

Overview

The Victron Energy BPP900460050 is an adapter kit for fitting a GX Touch 50 display into an existing CCGX panel cut-out. It is made for refits where a boat already has a Color Control GX opening at the helm, nav station, or electrical panel, and the owner wants to move to the newer touchscreen layout without recutting the panel.

The adapter is for the 5 inch GX Touch 50 format and is a mechanical mounting accessory, not an electronic interface. It gives the upgraded display a clean framed fit and supports two mounting approaches, depending on whether the priority is a more secure screen installation or easier screen removal during service and wiring work.

Key features

• Adapts an existing CCGX cut-out for use with a GX Touch 50 display.
• Fits the 5 inch GX Touch 50 format used in Victron GX monitoring installations.
• Useful for marine refits where the existing panel opening needs to be reused rather than enlarged or replaced.
• Supports two mounting methods: one with the screen installed for a more secure fit, and one without the screen installed for easier access and wiring work.
• Helps keep the display upgrade neat at helm stations, nav desks, equipment panels, and other visible control areas on board.

What’s included

• Metal bracket
• Plastic bezel
• Four mounting screws

Installation and setup

Before ordering, confirm that the vessel has a CCGX display cut-out and that the replacement display is the GX Touch 50. This adapter is meant to handle the panel fit between those two Victron display formats, so it is most useful when the existing opening is in good condition and located where the new screen can still be viewed and operated comfortably.

The including-screen method gives the GX Touch display the more secure installation. The excluding-screen method leaves the GX Touch easier to remove and also allows the adapter to be mounted before the wiring is completed, which can be helpful inside tight helm pods, console backs, and compact electrical panels.

Compatibility and fit

This adapter is specific to replacing a CCGX display with a GX Touch 50. It does not convert electrical signals, add network capability, or change the function of the GX device itself. Its job is to make the physical installation work cleanly when upgrading the display face in an existing cut-out.

It is a practical match for boat owners, installers, and service yards refreshing a Victron monitoring panel while trying to preserve the original dashboard or switch-panel finish.