TACO Marine Sandwich Style Rigid Vinyl Rub Rail Insert, For V11-3161, 3/4 in x 5/8 in, Black, 12 ft

Overview

The TACO Marine V22-3162BKA12 is a black sandwich-style rigid vinyl rub rail insert for covering the deck and hull joint on compatible boat rub rail systems. It measures 3/4 in. x 5/8 in. and is supplied as a 12 ft length, commonly shipped as two 6 ft sections for practical handling.

This insert works with the TACO Marine V11-3161 rub rail profile and is typically used on sailboats where the rub rail sits over the hull-to-deck joint. The rigid vinyl profile gives the joint a clean finished edge while helping the rub rail system take the everyday contact that happens around docks, pilings, trailers, and tight slips.

Key features

• Sandwich-style rigid vinyl insert made for rub rail systems that cap the deck and hull joint.
• Black finish for matching or replacing existing black rub rail trim.
• 3/4 in. x 5/8 in. profile for fit-sensitive replacement work.
• 12 ft length supplied in shorter cut sections for shipping and handling.
• Fits TACO Marine V11-3161 flexible vinyl rub rail, sold separately.
• Can be cut and drilled with woodworking-style tools, which helps during refit and repair work.
• Tight-radius forming may require preheating, especially around sharper corners.
• Made in the USA and backed by a 5-year limited warranty.

Installation and fit

For replacement work, the most important step is matching the profile to the existing rub rail, not just matching the color. Check the original insert shape and dimensions against the 3/4 in. x 5/8 in. profile before ordering, especially on older boats where rub rail systems may have been changed during previous repairs.

During installation, avoid stretching the insert as it is fitted into place. Stretching can make the material relax later and leave gaps at joints or ends. For curves with a tight radius, gentle preheating can help the vinyl follow the shape of the rail without forcing it.

Use cases on board

This insert is a practical match for sailboat owners, yards, and refit crews replacing worn, faded, cracked, or missing rub rail trim on a compatible TACO Marine sandwich-style system. It suits localized repairs as well as longer rub rail refresh projects where the original rail body is still serviceable.

On boats that spend time around floating docks, fixed pilings, tender docks, or crowded marinas, keeping the rub rail insert in good condition helps preserve the finished edge of the hull-to-deck joint and keeps the boat looking cared for.